Bureau Veritas Consumer Products Services

Transcription

1 Bureau Veritas Consumer Products Services CPS Regulatory Bulletins / Newsbytes 2012 Archive Americas Bureau Veritas Consumer Products Services ( BVCPS ) provides the information in this client bulletin/newsbyte archive as a resource of general information. It does not replace any applicable legal or regulatory requirements and is provided as is. BVCPS will not be liable for any indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH THESE CLIENT BULLETINS / NEWSBYTES. Bureau Veritas Consumer Products Services,. All rights reserved.

2 Americas 2012 Bulletins & Newsbytes Month of release Reference number Topic Location Jan 12NB-001 US CPSC Issues Position Letter on Children s Sleepwear US Jan 12NB-003 CPSC Releases Ballot Vote Sheet Recommending NPR for Infant US Swings Feb 12B-108 CPSC Issues Draft NPR for Safety Standard for Infant Swings US Feb 12B-111 US Toy Standard ASTM F to Become Mandatory US Feb 12NB-006 FTC Seeks Public Comments Regarding Rules under the Wool US Products Labeling Act Feb 12NB-009 Final Rules for US Safety Standard for Portable Bed Rails US Published in Federal Register Mar 12B-116 ASTM International Publishes New Standard for Sling Carriers US Mar 12NB-011 CPSC issues revised Final Rule for 16 CFR 1130, Requirements US for Consumer Registration of Durable Infant or Toddler Products Mar 12NB-012 AAFA Updates Restricted Substances List (RSL) US Apr 12B-119 The US State of South Carolina recently amended the existing US ban on phosphates in cleaning agents Apr 12NB-014 Consumer Product Safety Commission Grants Limited Exception US to Lead in Substrate Requirement Apr 12NB-015 Argentina Bans Bisphenol A in Baby Bottles Argentina May 12B-126 Environmental Protection Agency Proposes New Toxic US Substances Control Act (TSCA) Rules May 12NB-017 Maryland Enacts New Lead-Free Requirement for Certain US Plumbing Products May 12NB-018 Proposed Cosmetic Safety Amendments Act of 2012 US May 12NB-019 Argentina Allows Adjustment Period for Bisphenol A Baby Bottle Argentina Ban May 12NB-021 FDA Gives the Sunscreen Manufacturers Six More Months to US Comply with the Labeling Requirements Jun 12B-130 ASTM International Publishes New Standard for Baby Monitors US Jun 12B-132 Mexico Finalizes New Heavy Metals Requirements for Children s Mexico Items Jul 12B-135 CPSC Issued a New FAQ Regarding Drawstrings in Children s US Upper Outerwear Jul 12NB-023 Rhode Island Makes New ASTM Children s Jewelry Standard Law US Jul 12NB-024 FDA Bans Polycarbonate in Baby Bottles and Sippy Cups US Aug 12B-138 ASTM International Publishes Revised Standard for Bassinets US and Cradles Aug 12B-139 New California Proposition 65 Settlements US Aug 12B-140 ASTM International Publishes Revised Standard for Infant US Bedding and Related Accessories Aug 12B-142 Recent California Proposition 65 Lead in Jewelry Settlements US Establish More Stringent Requirements Aug 12NB-025 CPSC Proposes Guidance on Inaccessible Component Parts for US CPSIA Phthalate Requirement Aug 12NB-026 CPSC Publishes Direct Final Rules for 16 CFR 1215 (Infant Bath Seats) and 16 CFR 1219 (Full-Size Cribs) US Bureau Veritas Consumer Products Services ( BVCPS ) provides the information in this client bulletin/newsbyte archive as a resource of general information. It does not replace any applicable legal or regulatory requirements and is provided as is. BVCPS will not be liable for any indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH THESE CLIENT BULLETINS / NEWSBYTES. Bureau Veritas Consumer Products Services,. All rights reserved.

3 Aug 12NB-027 Maine Amends Regulation for the Safer Chemicals in Children s US Products Law Aug 12NB-028 California Revises Proposed Regulation for their Green US Chemistry Initiative Aug 12NB-030 UL Addresses Battery Ingestion Safety in Audio and Video US Devices Sep 12B-147 CPSC Publishes Final Rules for Play Yards within Federal Register US Sep 12B-150 FTC Seeks Public Comments Regarding the Proposed Changes to US the Fur Product Labeling and Advertising Rules Sep 12B-151 ASTM International Publishes Revised Hand - Held Infant Carrier US Standard Sep 12B-152 FTC Proposed Amendment to 16 CFR 423: Trade Regulation Rule US on Care Labeling Sep 12B-154 Proposition 65 Settlement Finalized for Halloween Items US Sep 12B-157 Security Exchange Commission Adopts Conflict Minerals Rules US Sep 12NB-032 Health Canada has Issued New Limits for Heavy Metal Impurities Canada in Cosmetic Products Sep 12NB-033 Illinois Governor Signs the Toxic-Free Toddler Law US Sep 12NB-035 ASTM Publishes New Version of F2088, Consumer Safety US Specification for Infant Swings Oct 12B-158 Federal Trade Commission Revises "Green Guides" US Oct 12B-159 CPSC Approves Further Research of Nine Opportunities to US Reduce Third Party Testing Costs Oct 12NB-036 TIA Provides Clarifications for ASTM F Heavy Metal US Requirements Nov 12B-163 CPSC Publishes Final Rules for Infant Swings within Federal US Register Nov 12B-167 Battery Charger Energy Efficiency Requirements Added to US California Appliance Efficiency Regulations Nov 12NB-037 TDCPP Becomes an Enforceable Proposition 65 Chemical US Nov 12NB-038 AAFA Releases New Edition of Restricted Substances List US Nov 12NB-040 Maryland Publishes Final Regulations Ban of Baby Crib Bumper US Pads Nov 12NB-041 Health Canada Proposes Ban of TCEP in Certain Products Canada Dec 12B-171 ASTM International Publishes New Standard for Constant Air US Inflatable Play Devices for Home Use Dec 12B-172 Window Covering Manufacturers Association (WCMA) US Announced Approval of New Standard Dec 12NB-045 CPSC Commissioners Vote in Favor of Publication of Notice of US Proposed Rulemaking for Hand-Held Infant Carriers and Bedside Sleepers into Federal Register Dec 12NB-046 ASTM Publishes New Version of F2670, Standard Consumer Safety Specification for Infant Bath Tubs US Bureau Veritas Consumer Products Services ( BVCPS ) provides the information in this client bulletin/newsbyte archive as a resource of general information. It does not replace any applicable legal or regulatory requirements and is provided as is. BVCPS will not be liable for any indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH THESE CLIENT BULLETINS / NEWSBYTES. Bureau Veritas Consumer Products Services,. All rights reserved.

4 NEWSBYTE: US CPSC Issues Position Letter on Children s Sleepwear On December 22, 2011, the US CPSC (Consumer Product Safety Commission) issued a letter to manufacturers, distributors, retailers and importers outlining and reminding them of the legal requirements for compliance of Children s Sleepwear in the US. This document serves as CPSC s position letter reiterating that all Children s Sleepwear and Loungewear sold in the US must comply with the flammability requirements of 16 CFR 1615/1616. It also underscored the fact that Children s Sleepwear and Loungewear must comply with requirements of the Consumer Product Safety Improvement Act (CPSIA), which include: testing by a third-party accredited approved lab; tracking labels and Children s Product Certificate (CPC) requirements; and complying with lead content, surface coatings and phthalate requirements. The letter also reminded the reader of the possible fines that could be levied for noncompliance. In addition to the letter, the CPSC also issued a public news release on December 23, 2011 announcing the letter and reinforcing the legal obligations required for Children s Sleepwear, including loungewear, as stated in the letter. Additional Information CPSC Letter: News Release: Bureau Veritas Assistance If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-001, January 2012 Bureau Veritas Consumer Products Services

5 NEWSBYTE: CPSC Releases Ballot Vote Sheet Recommending NPR for Infant Swings On January 11, 2011, the US Consumer Product Safety Commission (CPSC) released the draft Notice of Proposed Rulemaking (NPR) for the Safety Standard for Infant Swings. The proposed rule would establish a safety standard for Infant Swings, pursuant to section 104 of the Consumer Product Safety Improvement Act of The CPSC staff presented the draft NPR to the Commissioners on January 18 th during a public briefing. Upon the review and approval of the draft by the Commissioners, the NPR will be published in the Federal Register at which time comments may be submitted on the NPR. Additional Information To view the draft NPR for Infant Swings Bureau Veritas Assistance If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12B-003, January 2012 Bureau Veritas Consumer Products Services

6 CPSC Issues Draft NPR for Safety Standard for Infant Swings The Consumer Product Safety Commission (CPSC) has issued a draft Notice of Proposed Rulemaking (NPR) for infant swings, released under Section 104(b) of the Consumer Product Safety Improvement Act (CPSIA). The draft proposed rule incorporates the applicable voluntary standard ASTM F b with certain modifications to strengthen the standard. Comments on the NPR may be submitted up to April 25, Background of CPSIA Requirements Section 104(b) of the Consumer Product Safety Improvement Act (CPSIA) of 2008 requires the CPSC to review current industry standards for durable nursery products and to implement mandatory requirements for such products. The CPSC must mandate safety standards for no fewer than two nursery products every six months. The current NPR addresses infant swings. An infant swing is defined as a stationary unit with a frame and powered mechanism that enables an infant to swing in a seated position. An infant swing is intended for use by infants from birth until a child is able to sit upright unassisted. The CPSC staff recommends adopting the requirements specified in ASTM F b Standard Consumer Safety Specification for Infant Swings as a mandatory standard for infant swings with the modifications specified below. Additionally, the CPSC staff recommends an effective date of six months after publication of a final rule in the Federal Register. Summary of Proposed Changes to ASTM F b Proposed clarification to the current seat back angle measurement method. Proposal to increase the frequency of the dynamic load test from 50 to 500 and a clarification to the test method for the dynamic load test. Proposal to include a new requirement restricting a swing seat from having a vertical deflection greater than 4 inches when tested accordingly. Proposal to require battery compartments to be subjected to an electrical overload test, an accessible component temperature evaluation, and if the swing can operate from a 120-V branch circuit, then the swing must comply with the applicable requirements of 16 CFR Proposed clarification to the current unintentional folding requirement and the stability in the direction of swing requirement. Proposed change to the mobile attachment strength requirement which will require the force on the mobile or mobile component to be applied in the most onerous direction at or below the horizontal. Additional Information To view the draft NPR and the proposed changes: How Can Bureau Veritas Help? Bureau Veritas offers a full range of testing and quality solutions for toys and juvenile products. If you have any questions about these proposed revisions, please contact your customer service representative or cps.info@bureauveritas.com Contact Information: If you have any comments and/or questions, please contact your customer service representative or Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client bulletin as a resource of general indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH THIS CLIENT BULLETIN. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. February 2012, Bulletin 12B-108

7 US Toy Standard ASTM F to Become Mandatory ASTM F Standard Consumer Safety Specification for Toy Safety becomes a mandatory standard on June 12, The 2011 version of the standard was published on December 15, 2011, and as defined under the Consumer Product Safety Improvement Act (CPSIA) it becomes mandatory within 180 days of publication, unless rejected by the US CPSC (Consumer Product Safety Commission) within 90 days of publication. On February 15, 2012, the US CPSC Commissioners unanimously voted to accept the proposed revisions to ASTM F and the CPSC issued a notice in the Federal Register on February 22 nd announcing their decision to accept the 2011 version of the standard as mandatory. It should be noted that ASTM F does not incorporate the provisions for toy chests from ASTM F963-07e1, section 4.27, therefore, the requirements from ASTM F963-07e1 regarding toy chests remain in effect. \ Summary of Final Revisions to ASTM F The requirements and test methods for the Overload and Stability Sections have been clarified. A definition for toy seat has been added. Flammability: changed the word should to shall to eliminate the non-mandatory language. Packaging film changed to plastic film to be more inclusive and duplicate information deleted in the Test Method Section. Resistivity changed to resistance for strings and flying devices. Jaw entrapment test gauge was modified to add a third dimension; also added a requirement that the gauge has to completely pass through the opening. Exclusion added for soft filled rattles and teethers. Exclusions added for constant air inflatable products and juvenile products from the scope of the standard. Heavy metal requirements have been revised as follows: o total lead in surface coating limit has been reduced from 600 ppm to 90 ppm to be aligned with 16 CFR 1303; o new heavy metal in substrate requirement, equivalent to the European Toy Standard EN71:3, has been added; o new cadmium requirement added for metal components that fit within the small parts cylinder; o total digestion screening is allowed to determine compliance to the soluble requirement and the special soluble extraction requirement for metal small parts; o compositing is allowed when conducting the total digestion test only; and o alternative tests are allowed as long as specific conditions are met (i.e., XRF testing). A Guidance Annex for the design of bath toys to minimize potential projection hazards has been added. Changed flux density to flux index for toys with magnets. Additional Information Federal Register Announcement: How can Bureau Veritas Help? Bureau Veritas offers a full range of testing and quality solutions for toys and juvenile products. For assistance with compliance to this standard or If you have any questions, please contact your customer service representative or cps.info@bureauveritas.com Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client bulletin as a resource of general indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH THIS CLIENT BULLETIN. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. February 2012, Bulletin 12B-111

8 NEWSBYTE: FTC Seeks Public Comments Regarding Rules under the Wool Products Labeling Act On January 30, 2012, the Federal Trade Commission (FTC) announced an Advance Notice of Proposed Rulemaking and Request for Public Comments in regard to 16 CFR Part 300, Rules and Regulations Under the Wool Products Labeling Act of The FTC is seeking comments from the public on the following: Definitions in the Rules: Whether there is a need for modification to some of the definitions. If the disclosure of fiber content percentages in multiple languages may present a need for modification of the Rules. Recommendations on how the FTC can clarify or improve its consumer and business education materials to make them more useful, in an effort to ensure compliance with the Wool Act and Rules. The benefits and costs to companies of using identifiers other than company name or RN # (Registered Number). For example, numbers issued by other countries, such as Canada's CA Identification Number. The extent to which US retailers are obtaining guaranties and continuing guaranties under the Rules. Currently, the Wool Act provides that no one shall be guilty of misbranding a wool product if he or she obtains a guaranty in good faith that a wool product is not mislabeled and signed by the manufacturer or supplier residing in the United States. Note: Comments must be received by the FTC no later than March 26, For information on how to submit comments, please see link below. Additional Information To view FTC notice: How Can Bureau Veritas Help? Bureau Veritas offers a full range of testing and softlines solutions to meet your needs for compliance and supply chain quality management. In addition, our services can help address your questions on care labeling and other apparel issues. For assistance or more information, please contact your customer service representative or cps.info@us.bureauveritas.com. Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-006, February 2012 Bureau Veritas Consumer Products Services

9 NEWSBYTE: Final Rules for US Safety Standard for Portable Bed Rails Published in Federal Register On February 29, 2012, the Final Rule for the Safety Standard for Portable Bed Rails was published in the Federal Register by the US Consumer Product Safety Commission (CPSC). The final rule adopts the ASTM F as mandatory with no changes. The final rule also establishes an effective date of August 29, 2012 and will apply to product manufactured or imported on or after this date. Additional Information To view the final rules for the safety standard for bed rails: Bureau Veritas Assistance If you have any questions, please contact your customer service representative or Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-009, February 2012 Bureau Veritas Consumer Products Services

10 ASTM International Publishes New Standard for Sling Carriers In February 2012, ASTM International, formerly known as the American Society for Testing and Materials (ASTM), announced the publication of a new standard for Sling Carriers. The new standard, designated as ASTM F , provides safety and labeling requirements for Infant Slings. An Infant Sling is a product of fabric or sewn fabric construction which is designed to contain a child from birth (full term infant weighing 8 lbs. or more) through 35 lbs., in an upright or reclined position, while being supported by the caregivers torso. Introduction This safety specification was developed in response to data collected by the CPSC and it attempts to minimize hazards associated with Sling Carriers from occupant retention and a lack of consumer education on the proper use of sling carriers. The safety standard for sling carriers sets forth the following requirements: General Requirements Shrinkage requirements from laundering No hazardous sharp points or edges No small parts as received or after testing Any paint or surface coating must comply with 16 CFR 1303 Any exposed wood part shall be smooth and free from splinters Requirements for locking/latching mechanisms Requirements for finger entrapment hazards associated with circular holes in rigid materials Requirements for scissoring, shearing, or pinching hazards Monofilament threads shall not be used No flammable solids as defined within 16 CFR (c)(6)(vi) Performance Requirements Structural integrity requirements Static load test Dynamic load test Restraint system test Occupant retention test Marking and Labeling Requirements All Sling Carriers shall comply with the specified requirements for warning statements on the product, packaging, and within the instructional literature. Additional Information To purchase a copy of the ASTM F : How Can Bureau Veritas Help? Contact Information: Bureau If you have Veritas any comments offers a full and/or range questions, of testing please and contact quality your solutions customer for toys service and representative juvenile products. or analyticalservices@us.bureauveritas.com If you have any questions about these proposed revisions, please contact your customer service representative or cps.info@bureauveritas.com Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client bulletin as a resource of general indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH THIS CLIENT BULLETIN. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. March 2012, Bulletin 12B-116

11 NEWSBYTE: CPSC issues revised Final Rule for 16 CFR 1130, Requirements for Consumer Registration of Durable Infant or Toddler Products On February 17, 2012, the revised Final Rule for 16 CFR 1130, Requirements for Consumer Registration of Durable Infant or Toddler Products was published in the Federal Register. The amendment addresses interpretation issues with the original Final Rule that became effective in The changes were reported in a Bureau Veritas Bulletin released in August Not previously included in the Bulletin was the acceptance of a bar code on the registration code at a manufacturer s discretion. The effective date for the revised Final Rule has been set at February 17, Additional Information To view the revised final rules for 16 CFR 1130: Click to view the previous Bureau Veritas Bulletin: Bureau Veritas Assistance If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-011, March 2012 Bureau Veritas Consumer Products Services

12 NEWSBYTE: AAFA Updates Restricted Substances List (RSL) The 10 th version of The American Apparel and Footwear Association (AAFA) restricted substances list (RSL) has been published. Updates in this version include the addition of 18 chemicals to appendix I, which lists chemicals that are associated with reporting laws, as well as other minor administrative changes. The practical quantification limits (PQL) defined in a guidance document issued by Washington State for their Children s Safe Product Act reporting law have also been added to appendix I. A complete list of the updates is included at the end of the RSL. The 10 th version of the AAFA RSL is currently available in English, Vietnamese, Chinese and Spanish on the AAFA website: Bureau Veritas Assistance If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com. Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-012, March 2012 Bureau Veritas Consumer Products Services

13 The US State of South Carolina recently amended the existing ban on phosphates in cleaning agents On 6 March 2012, the State of South Carolina enacted ACT 120, which amended the existing laws (Section , Code of Laws of South Carolina, 1976) governing phosphates in cleaning agents. This amended law now includes certain household cleaners, which includes dish detergents as well as commercial laundry. The effective date is dependent on the nature of the cleaning agent and starts July Per the section, a manufacturer, or distributer cannot sell cleaning agents in the state of South Carolina that contains more than 0.05% by weight of phosphate, which is expressed as elemental phosphorus. Cleaning agents are defined as any household or commercial laundry detergent, dishwashing compound, household cleaner, household or commercial dishwashing detergent, metal cleaner, industrial cleaner, phosphate compound, or other substance that is intended to be used for cleaning purposes. Timeline: Household dishwashing detergent requirements take effect July 1, This effective date does not apply to products from inventory existing and in stock on retail shelves. Commercial dishwashing and laundry detergent and industrial cleaners requirements take effect on July 1, All other provisions of this act take effect July 1, Contact Information If you have any comments and/or questions, please contact your customer service representative or cps.info@bureauveritas.com Contact Information: If you have any comments and/or questions, please contact your customer service representative or Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client bulletin as a resource of general information. analyticalservices@us.bureauveritas.com It does not replace any applicable legal or regulatory requirements and is provided as is. BVCPS will not be liable for any bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT BULLETIN. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. April 2012, Bulletin 12B-119

14 NEWSBYTE: The Consumer Product Safety Commission Grants Limited Exception to Lead in Substrate Requirement The Consumer Product Safety Commission (CPSC) is granting a requested functional exception for certain components of ride-on toys from the 100 ppm total lead in substrate limit. The exception applies to aluminum die-cast ride-on pedals and other similar aluminum components of ride-on toys intended for children ages 3 years and older. This exception is limited to aluminum components that are not likely to be placed in the mouth or ingested or extensively contacted by children because of their function and location on the product. These aluminum alloy components must meet a 300 ppm total lead content limit. This limited exception is effective as of April 5, To view the Federal Register notice: Bureau Veritas Assistance If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com. Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-014, April 2012 Bureau Veritas Consumer Products Services

15 NEWSBYTE: Argentina Bans Bisphenol A in Baby Bottles A new regulation issued by Argentina s National Drug, Food and Medical Technology Administration (Disposition 1207/2012) bans the manufacture, importation and sale of baby bottles containing bisphenol-a (BPA). The regulation was published on March 5, 2012, and gives companies 30 business days to comply. Argentina joins a growing list of countries with similar bans including Brazil, Canada, and the European Union. Link to regulation (in Spanish): Bureau Veritas Assistance If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com. Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-015, April 2012 Bureau Veritas Consumer Products Services

16 Environmental Protection Agency Proposes New Toxic Substances Control Act (TSCA) Rules The Environmental Protection Agency (EPA) has proposed changes to Toxic Substances Control Act (TSCA) regulations. The proposed changes are related to the significant new use reporting requirements for five chemicals. These chemicals include polybrominated diphenylethers (PBDEs), benzidine dyes, short chain chlorinated paraffins (SCCP), hexabromocyclododecane (HBCD), and phthalate di-n-pentyl phthalate (DnPP). The EPA will accept comments on these proposed rules until June 1, Proposed Rules Would require manufacturers, importers, and processors of these chemicals to report any new uses to the EPA 90 days prior to manufacturing, importing, or processing them. Would require manufacturers and importers of products that contain PBDEs, benzidine dyes, and HBCD to report any new uses to the EPA 90 days prior to manufacturing or importing them. Important note: any product containing benzidine dyes would be considered a new use and any consumer textiles, other than motor vehicle upholstery, containing HBCD would be considered a new use. Chemical Information Polybrominated diphenylethers (PBDE) o Used as a flame retardant o Potentially affected industries: Manufacturers of textile, furniture, polyurethane foam, high impact polystyrene and ABS plastic, and electronics equipment as well as manufacturers of PBDEs Benzidine dyes o Used in textile dying, paints and printing inks paper o Potentially affected industries: Manufacturers of benzidines, dyes, textiles, leather and allied products, paper as well as apparel, piece goods and notions wholesalers, and clothing and accessories stores. Short chain chlorinated paraffins (SCCP) o Used in lubricants and coolants in metal cutting and metal forming operations, as a plasticizer and flame retardant in plastics, and as an additive in paints o Potentially affected industries: Manufacturers of short chain chlorinated paraffins including petroleum lubricating and grease manufacturers. Hexabromocyclododecane (HBCD) o Used as a flame retardant o Potentially affected industries: Painting and wall covering contractors, textile and fabric finishing mills, curtain and drapery mills, other household textile product mills, upholstered household furniture manufacturing, household furniture manufacturing, mattress manufacturing, blind and shade manufacturing, furniture merchant wholesalers, home furnishing merchant, reupholstry and furniture repair. Di-n-pentyl phthalate (DnPP) Contact Information: o Used as a plasticizers If you have o any Potentially comments affected and/or industries: questions, please contact your customer service representative or cps.info@us.bureauveritas.com Manufacturers of DnPP and plastic materials and resins Full Text: 0f!OpenDocument Contact Information: If Contact you have Information: any comments If you and/or have any questions, comments please and/or contact questions, your please customer contact service your customer representative service or representative cps.info@us.bureauveritas.com or cps.info@us.bureauveritas.com Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client bulletin as a resource of general information. It does not replace any applicable legal or regulatory requirements and is provided as is. BVCPS will not be liable for any indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH THIS CLIENT BULLETIN. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. May 2012, 12B-126

17 NEWSBYTE: Maryland Enacts New Lead-Free Requirement for Certain Plumbing Products The US State of Maryland has implemented the lead-free definition used by other states. Maryland altered the definition of lead-free to require a weighted average lead content of 0.25% for the wetted surfaces of a pipe, pipe fitting, plumbing fitting, or fixture intended to dispense water for human consumption through drinking or cooking. Previously Maryland utilized the Federal definition based on lead content only. California and Vermont currently use 0.25% for the wetted surfaces. This law was approved by the Governor on April 10, This law goes into effect on October 1, Click to view the regulation: Bureau Veritas Assistance If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com. Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-017, May 2012 Bureau Veritas Consumer Products Services

18 NEWSBYTE: Proposed Cosmetic Safety Amendments Act of 2012 The Cosmetic Safety Amendments Act of 2012 (H.R. 4395) was recently introduced to the US Congress. The purpose is to amend the Federal Food, Drug, and Cosmetic Act to establish new procedures and requirements for the registration of cosmetic product manufacturing establishments; the submission of cosmetic product and ingredient statements; the reporting of serious and unexpected cosmetic product adverse events; and for other purposes. Click to view the regulation: How Bureau Veritas Can Help You In today s global marketplace, product quality and safety are critical to all involved in the health and beauty products industries. Whether you are a retailer or a global manufacturer, regulatory compliance and consumer satisfaction are keys to success. Bureau Veritas services meet your needs by designing quality assurance programs that result in superior products for consumers. Services such as testing, inspections, and consumer panel evaluations help companies increase sales through improved customer satisfaction, lower costs due to fewer consumer complaints, and competitive implementation of effective private label programs. For more information or if you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com. Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-018, May 2012 Bureau Veritas Consumer Products Services

19 NEWSBYTE: Argentina Allows Adjustment Period for Bisphenol A Baby Bottle Ban Argentina s National Drug, Food and Medical Technology Administration (ANMAT) recently banned the manufacture, importation and sale of baby bottles containing bisphenol A and gave companies 30 business days to comply. On April 27, ANMAT issued a new order (2268/2012) that allows companies 180 days to make necessary adjustments to meet the requirements of the ban. During this period companies may sell baby bottles containing bisphenol A that have a label with the following warning statement: Atención: No caliente alimentos dentro de este biberón. Deje entibiar los alimentos calientes previo a su llenado. Reemplace este biberón cuando presente desgaste (rayones, grietas, pérdida de color). Companies must submit an affidavit within 10 days of the effective date of this order to the National Food Institute that provides information about the amount of bottles in stock and a labeling plan. Link to regulation (in Spanish): View related previously published Bulletin: Argentina Bans Bisphenol A in Baby Bottles How Bureau Veritas Can Help Bureau Veritas offers a wide range of chemical management solutions to help you comply with global chemical requirements. Our technical professionals will assist you in reviewing your company s chemical policies and recommending areas of improvement, so that you are able to implement sound practices to manage your supply chain risk. By using our services, you can gain confidence, control and traceability over your supply chain. If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com. Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-119, May 2012 Bureau Veritas Consumer Products Services

20 NEWSBYTE: FDA Gives the Sunscreen Manufacturers Six More Months to Comply with the Labeling Requirements The US Federal Drug Administration (FDA) has extended the deadline for the new sunscreen labeling requirements until December This extension stems from manufacturers having trouble making the changes. Refer to our Sunscreen Bulletin for a detailed explanation on the new sunscreen requirements: New US Labeling Rules for Sunscreens. Bureau Veritas Assistance If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com. Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client newsbyte as a resource of general newsbyte. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT NEWSBYTE. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. 12NB-021, May 2012 Bureau Veritas Consumer Products Services

21 ASTM International Publishes New Standard for Baby Monitors In May 2012, ASTM International, formerly known as the American Society for Testing and Materials (ASTM), announced the publication of a new safety standard for Baby Monitors. The new standard, designated as ASTM F , provides safety and labeling requirements for Baby Monitors. Introduction This safety specification was developed in response to data collected by the CPSC and it attempts to minimize hazards associated with Baby Monitors including strangulation to children as a result of entanglement within the monitor cord. The safety specification requirements are amenable to corded audio and video monitors as well as motion sensor baby monitors. The safety standard for Baby Monitors sets forth the following requirements: General Requirements No hazardous sharp points or edges Appropriate warning labels dependent on the monitor type o Corded monitors intended to be attached to a crib o Corded monitors not intended to be attached to a crib Any paint or surface coating must comply with 16 CFR 1303 No flammable solids as defined within 16 CFR (c)(6)(vi) Warning label permanency requirements Toy accessories shall meet ASTM F963 Marking and Labeling Requirements All Baby Monitors shall comply with the specified requirements for warning statements on the product, packaging, and within the instructional literature. Additional Information To purchase a copy of the ASTM F : How Can Bureau Veritas Help? Bureau Veritas offers a full range of testing and quality solutions for toys and juvenile products. If you have any questions about these proposed revisions, please contact your customer service representative or cps.info@bureauveritas.com Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client bulletin as a resource of general indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH THIS CLIENT BULLETIN. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. June 2012, Bulletin 12B-130

22 Mexico Finalizes New Heavy Metals Requirements for Children s Items In 2010 the Mexican government proposed more stringent heavy metals requirements for toys for children under 12 years old and preschool materials for children 6 years of age and younger. These requirements have been finalized and are scheduled to become effective as of August 13, Definitions Preschool materials - Materials used as an aid in teaching with the aim of developing certain skills and abilities specific to preschool age children (no older than six years of age), which have a colored component or material, such as graphite and color pencils, erasers, crayons, glue, blunt scissors, clay, watercolors, markers, chalk, abacus, pencil sharpeners, etc. Toy - A product or material designed, intended and manufactured for use in a game or for entertainment, which may be used or enjoyed actively or passively. Lead Requirement Scope - Toys for children under 12 years old and preschool materials that pose a risk of being sucked, licked or swallowed. Limit - 90 mg/kg soluble lead. Other Heavy Metals Requirements Scope - Toys for children under 3 years old and preschool materials that pose a risk of being sucked, licked, or swallowed. Limits: o o o o o o o 60 mg/kg soluble antimony 25 mg/kg soluble arsenic 1000 mg/kg soluble barium (250 mg/kg for modeling clay and finger paints) 75 mg/kg soluble cadmium (50 mg/kg for modeling clay and finger paints) 60 mg/kg soluble chromium (25 mg/kg modeling clay and finger paints) 60 mg/kg soluble mercury (25 mg/kg modeling clay and finger paints) 500 mg/kg soluble selenium Exemptions Products for export Pigmented mass toys (toys whose materials were pigmented during the manufacturing process) Packaging, packaging instructions, brochures, and product information that is not part of the item Globe microfoil over cm in diameter inflated with helium (e.g. foil balloons) Purely ornamental holiday ornaments. Games and toys intended for use in public spaces (e.g. parks, playgrounds, carousels, etc.) Ride on toys, trikes, and large toys that a baby will not suck or lick. Important Point: Test method is equivalent to the European Toy Standard, EN71-3. Full text (in Spanish): Contact Information: If you have any comments and/or questions, please contact your customer service representative or cps.info@us.bureauveritas.com Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client bulletin as a resource of general indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT CLIENT BULLETIN. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. June 2012, Bulletin 12B-132

23 CPSC Issued a New FAQ Regarding Drawstrings in Children s Upper Outerwear On July 19, the Consumer Product Safety Commission (CPSC) posted a new FAQ on their website which provides some clarifications to the current drawstring requirements of ASTM F and 16 CFR Background: Last year, on July 19, 2011, the CPSC published a final rule, stating that children s upper outerwear garments which have neck or hood drawstrings (in sizes 2T to 12), and those which have waist or bottom drawstrings (in sizes 2T to 16) that do not meet the criteria of the previously voluntary standard, ASTM F , Standard Safety Specifications for Drawstrings on Children s Upper Outerwear, present a substantial product hazard. The new rule, 16 CFR 1120, became effective on August 18, CFR 1120 included some points in addition to that included in ASTM F , such as: The definition of a drawstring is a non-retractable cord, ribbon, or tape of any material to pull together parts of outerwear to provide for closure. This definition considers ties to be drawstrings, as well as traditional tunneled drawstrings. Size equivalents for garments that are sized under S, M, L sizing system are as follows: Girls and Boys sizes Large (L) are equivalent to size 12. Girls and Boys sizes Extra-large (XL) are equivalent to size 16. The apparel industry raised questions with the CPSC following finalization of the rule. The FAQ clarified several other points as well. The most noteworthy are as follows: Definition of upper outerwear: In addition to clothing, such as jackets and sweatshirts, generally intended to be worn on the exterior of other garments, the CPSC clarified that lightweight outerwear that is appropriated for use in warmer climates is also included. Underwear, inner layers, pants, shorts and skirts are excluded from the definition. The CPSC reiterated that ties are included in their definition of drawstrings. It was clarified that belts are not included in the scope of the drawstring rule. Definitions of "non-retractable" and "fully retractable" were addressed. The CPSC listed additional requirements for children s upper outerwear which are required by the Consumer Product Safety Improvement Act of 2008, as follows: o Lead in surface coatings o Total lead content o Testing and Certification o Tracking Labels The CPSC also provided the legal rationale behind creating a list of substantial product hazards, as permitted under section 15(j) of the CPSA. Following is a link to the CPSC s FAQ: Contact information If you have any questions, please contact your customer service representative or cps.info@us.bureauveritas.com Bureau Veritas Consumer Products Services, Inc. ( BVCPS ) provides the information in this client bulletin as a resource of general information. It does not replace any applicable legal or regulatory requirements and is provided as is. BVCPS will not be liable for any indirect, special, punitive, consequential or other damages (including without limitation lost profits) of any kind in connection with this client bulletin. BVCPS DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH THIS CLIENT BULLETIN. Copyright 2012 Bureau Veritas Consumer Products Services, Inc. All Rights Reserved. July 2012, Bulletin 12B-135