Thermal Insulation KEYMARK Conference

Transcription

1 Bild: Forschungsinstitut für Wärmeschutz e.v. München Invitation/Programme Thermal Insulation KEYMARK Conference October 18-19, 2016 DIN Deutsches Institut für Normung e. V, Am DIN-Platz, Burggrafenstraße 6, Berlin

2 Introduction The conference will give an overview of the KEYMARK System as a uniform Product Quality Mark for European Consumers in general and will provide details of the VDI / KEYMARK System of thermal insulation products for buildings and industrial applications. The product s compliance with the CE Marking only ensures compliance with the minimum legal requirements for thermal insulation products, basically, their reaction to fire classification. Thus, the mandatory CE marking only focuses on the basic requirements met by the products, based on the Construction Product Regulation, and therefore voluntary product certification encompasses all the characteristics defined in the product standards. The KEYMARK is the European Certification Mark showing the conformity of products with European Standards. Whereas CE marking shows the observance of legal minimum requirements, the KEYMARK provides a real benefit for the Target groups Notifying authorities and accreditation bodies who are interested to learn answers to questions they usually do not raise, but perhaps should. Certification bodies interested in finding out who they can rely on as far as subcontracting testing for certification purposes is concerned. Market surveillance authorities and users to see Parties involved Manufacturers: Declercq Isolatie Isodec, DEUTSCHE ROCKWOOL Mineralwoll GmbH & Co. OHG, KAIMANN GmbH, Knauf Insulation GmbH, Paroc Group Oy, Pavatex SA, Pittsburgh Corning Europe, Recticel, Rockwool A/S, Rockwool Finland Oy, ROCKWOOL FRANCE SAS, Saint-Gobain ISOVER A/S, Rockwool A/S, Saint Gobain Isover G+H AG, Sager AG, Steico SE, SYN- THESIA INTERNACIONAL S.L.U. Certification bodies: ACERMI (France), AENOR (Spain), BBA (UK), BCCA (Belgium), Bureau Veritas (Denmark), BSI (UK), Dancert (Denmark), DIN CERTCO (Germany), FIW München (Germany), IMBiGS (Poland), KIWA (The Netherlands), SINTEF (Norway), SP consumer: tested and certified observance of uniform European Quality Standards. The legally requested CE marking for construction products can be completed thereby in a meaningful way. In the EU member states, an organized and effective market monitoring is rare. For this reason, voluntary product certification, documented by the KEYMARK, is an important instrument for increasing confidence and encouraging the harmonization of national certification schemes. Registered laboratories, the experts in the field of thermal testing working with identified reference test equipment will share experiences and will inform how they can improve to ensure the high quality of the supervised products. The main instrument for that are the implementation of round robins and audits to achieve a transparency and a level of fair playing field, both for manufacturers and laboratories. it confirmed that there is more to it than being accredited and/or notified. Manufacturers wishing to get to know new testing laboratories that are amongst the best in the world of thermal testing. All presentations will be given in English, no translation is foreseen. Registration is required. (Sweden), VTT (Finland), Warrington Certification Limited (UK) Registered laboratories: ACERMI (France), BBA (UK), BBRI-CSTC-WTCB (Belgium), BVFS (Austria), CEIS (Spain), CSI (Czech Republic), DTI (Denmark), EMPA (Switzerland), FIW München (Germany), IMBiGS (Poland), Istituto Giordano (Italy), KIWA BDA Testing (The Netherlands), Magistratsabteilung 39 (Austria), MPA-Bau (Germany), MPA-NRW (Germany), MPA-Stuttgart (Germany), NPL (UK), OFI (Austria), SINTEF (Norway), SP (Sweden), TZUS (Czech Republic), VTT (Finland)

3 Programme Thermal Insulation KEYMARK Conference October 18-19, 2016, DIN Conference Center, Berlin Tuesday, October 18, 2016, Conference Room Moderation Prof. Dr.-Ing. Andreas Holm, FIW München, Germany 10:00 Opening 10:15 The KEYMARK System History and Future Sören Scholz, Katharina Meyer, DIN CERTCO GmbH, Berlin, Germany 10:45 Harmonized EU standards for Thermal Insulation Dr. Roger de Block, Consultant / Saint-Gobain Insulation, Brussels, Belgium 11:00 Construction Products Regulation (CPR) and Assessment and Verification of Constancy of Performance (AVCP) Vicente Leoz Argüelles, L&B European Consultants, Brussels, Belgium 11:30 The Existing Thermal Insulation KEYMARK System Erik Rasmussen, Rockwool International, Denmark; Piet Vitse, FOAMGLAS, Belgium 12:00 VDI Activities on Thermal Insulation and KEYMARK Website Roland Schreiner, FIW München; Dr.-Ing. Ernst.-G. Hencke, VDI, Germany 12:30 Lunch Break Moderation Michael Petersen, St. Gobain Scandinavia 13:30 Demands of Customers: Results of a Survey Andreas Gürtler, FESI, Switzerland 14:00 Demands of Customers: Service Provider for Thermal Insulation Thomas Ortlieb, G+H Isolierung, Germany 14:30 Demands of Manufacturers Dr. Thomas Tenzler, FMI, Germany 14:45 Demands of Manufacturers Dirk Vermeulen or N.N., Recticel, Belgium 15:00 Coffee Break 15:15 The New Insulation KEYMARK System for all Thermal Insulation Piet Vitse, FOAMGLAS, Belgium; Roland Schreiner, FIW München 15:45 Significance of voluntary certification Eric Winnepenninckx, BCCA, Belgium; Anders Elbek, Dancert, Denmark 16:05 Technical questions of certification Wolfgang Albrecht, FIW München, Germany; Alain Koenen, LNE, France 16:25 Demands of Certification in Poland Artur Miros, IMBiGS (Poland) 16:35 Round Table Discussion Moderation: Michael Petersen, St. Gobain Scandinavia 17:10 Closing of the 1 st Conference day 17:30-20:00 Get together

4 Wednesday, October 19, 2016, Laboratory Day, Conference Room 9:00 Welcome and presentation of agenda Piet Vitse 9:15 General update for registered labs including status on comparative testing Erik Rasmussen and Ernst-Günter Hencke 10:00 Results from comparative testing Establishing a KEYMARK value Erik Rasmussen 10:30 IRMM update, the new certificate with extended validity period, low temperature values, larger thickness Alain Koenen 10:45 Coffee Break 11:15 Sample preparation and testing climate to avoid condensation on cold plate & preparation of test specimens including conditioning depending on products (e.g. hygroscopic products). Testing of wet test specimens Alain Koenen, Wolfgang Albrecht 11:45 Low lambda products, experience on how to handle Wolfgang Albrecht 12:15 Lunch Break 13:15 EPS in situ product round robin Susanne Dehn 13:45 Introduction to high and low temperature testing Roland Schreiner 14:00 Presentation of the status on comparative testing, audit and approval of registered labs Ernst-Günter Hencke 14:30 The German intercomparison of thermal conductivity at higher temperatures different measuring methods Roland Schreiner 15:00 EMPR Thermo project on new reference material for high temperature testing Ulf Hammerschmidt, PTB 15:30 Discussion and closure of the conference

5 Registration The conference participation is free of charge. For registration, please use the following link: Organization Conference Venue DIN Deutsches Institut für Normung e. V Am DIN-Platz, Burggrafenstraße Berlin Accommodation 1. Hotel Ambassador, Bayreuther Str , Berlin, Phone: , ambassador-berlin@sorat-hotels.de; 2. Hotel Berlin, Lützowplatz 17, Berlin; Phone: , info@hotel-berlin.de; 3. Holiday Inn Express; Kurfürstenstr. 78, Berlin; Telefon: , berlin@fmhos.com Travel Information Next Underground Station: Wittenbergplatz From the airports: Next Railway Station for long distances: Berlin Central Station Take S-Bahn to Zoologischer Garten, direction Westkreuz. Next Regional and S-Bahn Station: Zoologischer Garten From there, take bus 100 to Bayreuther Straße. Tegel: Take bus 109 or bus X9 to Zoologischer Garten. Schönefeld: Airport-Express or S-Bahn S9 to Ostkreuz, then S-Bahn S5, S7, S75 direction Westkreuz, Potsdam or Spandau, to Zoologischer Garten. Supported by