HHR120AA Cylindrical 4/5AA size (HR 15/43) Dimensions (with Tube)
|
|
|
- Pauline Hawkins
- 7 years ago
- Views:
Transcription
1 HHR120AA Cylindrical 4/5AA size (HR 15/43) () Typical Characteristics : 600mA(1 It) hrs Time (minutes) Typical Characteristics : 1200mA(1 It) hrs,20 : / / / / mA(0.2 It) Time (hours) 6 Nominal Voltage V Storage < 3 months 1220 mah 1150 mah 19mΩ 120mA (0.1It) x 16hrs. 1200mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 1200mA(1 It) hrs,20 : mA(1 It) 2400mA(2 It) Time (minutes)
2 HHR150AA Cylindrical AA size (HR 15/51) () Typical Characteristics : 1500mA(1 It) hrs Time (minutes) Typical Characteristics : 1500mA(1 It) hrs,20 : / / / / mA(0.2 It) Time (hours) Nominal Voltage V Storage < 3 months 1580 mah 1500 mah 20mΩ 150mA (0.1It) x 16hrs. 1500mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 1500mA(1 It) hrs,20 : mA(1 It) 3000mA(2 It) Time (minutes)
3 HHR200A Cylindrical 4/5A size (HR 17/43) () Typical Characteristics : 1700mA(5 It) hrs Time (minutes) Typical Characteristics : 1700mA(1 It) hrs,20 : / / / / mA(0.2 It) Time (hours) Nominal Voltage V Storage < 3 months 2040 mah 2000 mah 20mΩ 200mA (0.1It) x 16hrs. 2000mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 1700mA(5 It) hrs,20 : mA(1 It) 4000mA(2 It) Time (minutes)
4 HHR200SCP Cylindrical 4/5SC size (HR 23/34) () Typical Characteristics : 2000mA(1 It) hrs Time (minutes) Typical Characteristics : 2000mA(1 It) hrs,20 Disharge : / /- 1+0/ / mA(1 It) Time (minutes) Nominal Voltage V < 2 years Storage < 6 months 2100 mah 1900 mah 5mΩ 200mA (0.1It) x 16hrs. 2000mA (1It) x hrs. 0 to 45 0 to to to to to to to 113 : 2000mA(1 It) hrs,20 Disharge : A 20A Time (minutes)
5 HHR210A Cylindrical A size (HR 17/50) () Typical Characteristics : 2100mA(1 It) hrs Time (minutes) Typical Characteristics / / / / : 2100mA(1 It) hrs,20 : mA(0.2 It) Time (hours) Nominal Voltage V Storage < 3 months 2200 mah 2100 mah 20mΩ 210mA (0.1It) x 16hrs. 2100mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 2100mA(1 It) hrs,20 : mA(1 It) 4200mA(2 It) Time (minutes)
6 HHR210AA/B Cylindrical AA size (HR 15/51) () Typical Characteristics : 1100mA (0.55 It), - V=5mV Time (hrs.) Typical Characteristics / / /- 9 +0/ : 200mA(0.1 It) x 16 hrs., 20 : mA (0.2It) Time (hours) Nominal Voltage Approx. internal Impedance Storage < 3 months V 2080mAh 2000mAh 25mΩ 200mA (0.1It) x 16 hrs. 1200mA (1It) x 2 hrs. C F 0 C to 45 C 32 F to 113 F 0 C to 40 C 32 F to 113 F -10 C to 65 C 14 F to 149 F -20 C to 35 C -4 F to 95 F -20 C to 45 C -4 F to 113 F -20 C to 55 C -4 F to 131 F : 1100mA (0.55It), - V, 20 : mA 2000mA (2It) (1It) Time (min.) It(A) = Cn (Ah)/1h * [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours.
7 HHR210AH Cylindrical A size (HR 17/50) () Typical Characteristics Time (hours) :210mA(0.1 It) 16hrs Typical Characteristics / / / / Capacity Ratio (%) : 210mA(0.1 It) 15hrs Disharge: 420mA(0.2 It),cut off voltage V Disharge : () Nominal Voltage Average 2 Capacity 1 Approx. internal Impedance Storage < 3 months < 1 week V 2050mAh 1900mAh 20mΩ 210mA (0.1It) x 16 hrs to to to to to 45-4 to to 55-4 to to 60-4 to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. : 210mA(0.1 It) 16hrs,25 Disharge: 420mA(0.2 It) Time (hours)
8 HHR250SCH Cylindrical SC size (HR 23/43) () Typical Characteristics : 0.1It x 15h at 25, 40, 60 : 0.1It to V at 25 Rest: 3h Capacity (mah) Typical Characteristics : 0.5It x 2.4h at 25 Rest: 1h : 1, 2, 3It to V at / /- 1+0/ / It 2It 3It Capacity (mah) 2 Nominal Voltage V Average 2650 mah Capacity mah 5mΩ 250mA x 16hrs. 3 Low Rate 1250mA x 2.4 hrs mA x 32 hrs. 83mA x 48 hrs. < 6 months Storage < 1 week -10 to to to to to to to to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system : 0.5It x 2.4h Rest: 1h : 10, 20, 30A to V at 20 10A 20A 30A Capacity (mah) It(A) = Cn (Ah)/1h * [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours.
9 HHR260SCP Cylindrical SC size (HR 23/43) () Typical Characteristics : 2600mA x hrs Time (minutes) Typical Characteristics : 2600mA x hrs., 20 : 2600mA, 0, 20, / /- 1+0/ / Time (minutes) 2 Nominal Voltage V Average 2600 mah Capacity mah 5mΩ 260mA x 16hrs. 2600mA x hrs. 0 to to to 65 Storage < 3 months -20 to to 55 1 After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 32 to to to to to 131 : 2600mA x hrs., 20 : 10A, 20A, 20 10A 20A Time (minutes) It(A) = Cn (Ah)/1h * [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours.
10 HHR300CH Cylindrical C size (HR 26/50) for backup use () Typical Characteristics : 300mA(0.1 It) x 16hrs Time (hours) Typical Characteristics /- 2+0/ /- 7+0/ Capacity Ratio (%) : 300mA (0.1 It) x 16 hrs. : -10 to : 600mA (0.2 It) 40 Cut-off Voltage: V : ( C) Nominal Voltage V Average 2 Capacity 1 3 Low Rate Low Rate Storage < 3 months 3300 mah 3100 mah 5mΩ 300mA (0.1It) x 16hrs. 1500mA (1It) x 2.4 hrs. 4 0 to to to to to mA x 32 hrs. 100mA x 48 hrs. 32 to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system are used. In order to maximize battery safety, please consult Panasonic when determining charge / discharge specs, warning label contents : 300mA(0.1It) x 16 hrs., 25 C : 10A, 20A, 25 C 10A 20A Time (minutes)
11 HHR300SCP Cylindrical SC size (HR 23/43) () Typical Characteristics : 3000mA(1 It) hrs Time (minutes) Typical Characteristics Nominal Voltage V < 2 years Storage < 6 months / / mah 2800 mah 4mΩ 300mA (0.1It) x 16hrs. 3000mA (1It) x hrs. 0 to 45 0 to to to / / to to to to 113 : 3000mA(1 It) hrs,20 Disharge : mA(1 It) Time (minutes) : 2000mA(1 It) hrs,20 Disharge : A 20A Time (minutes)
12 HHR330APH Cylindrical L-Fat A size (HR 18/67) () Typical Characteristics : 330mA(0.1 It) 16hrs Time (hours) Nominal Voltage V Average 3300 mah Capacity mah 5.5mΩ 330mA x 16hrs. 3 Low Rate 1650mA x 2.4 hrs mA x 32 hrs. 110mA x 48 hrs. < 6 months Storage < 1 week / / / / to to to to to to to to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system and unit design. Typical Characteristics Capacity Ratio (%) : 330mA(0.1 It) 16hrs 40 Disharge: 660mA(0.2 It),cut off voltage V Disharge : () : 330mA(0.1 It) 16hrs, 20 : 20 10A 20A Time (min.)
13 HHR370AH Cylindrical L-Fat A size (HR 18/67) () Typical Characteristics : 330mA(0.1 It) 16hrs Time (hours) Nominal Voltage V Average 3700 mah Capacity mah 20mΩ 370mA x 16hrs. 3 Low Rate 1750mA x 2.4 hrs mA x 32 hrs. 123mA x 48 hrs. < 6 months Storage < 1 week / / / / to to to to to to to to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system and unit design. Typical Characteristics Capacity Ratio (%) : 330mA(0.1 It) 15hrs 40 Disharge: 660mA(0.2 It),cut off voltage V Disharge : () : 330mA(0.1 It) 16hrs,25 Disharge: 660mA(0.2 It) Time (hours)
14 HHR380A Cylindrical L-A size (HR 17/67) () Typical Characteristics : 2000mA- V=10mV Time (minutes) Typical Characteristics : 2000mA dt/dt=/min,20 Disharge : / / / / mA(0.2 It) Time (hours) Nominal Voltage V 3800 mah 3700 mah 25mΩ *** 370mA (0.1It) x 16hrs. 2000mA dt/dt 0 to to to to to to 149 Storage < 3 months -20 to 45-4 to to 55-4 to 131 *** For rapid charge: use dt/dt charge termination method. Refer to the Nickel Metal Hydride Methods section for further details. : 2000mA,dT/dt=/min.20 Disharge : mA(0.53 It) 3800mA(1 It) Time (minutes)
15 HHR450A Cylindrical L-fat A size (HR 18/67) () Typical Characteristics : 1500mA- V=10mV Time (minutes) Typical Characteristics : 2000mA dt/dt=/min,20 Disharge : / / / / mA(0.2 It) Time (hours) Nominal Voltage V *** Storage < 3 months 4500 mah 4200 mah 25mΩ 420mA (0.1It) x 16hrs. 2000mA dt/dt 0 to 45 0 to to to to to to to to to 131 *** For rapid charge: use dt/dt charge termination method. Refer to the Nickel Metal Hydride Methods section for further details. : 2000mA dt/dt=/min,20 Disharge : mA(0.44 It) 4500mA(1 It) Time (minutes)
16 HHR60AAAH Cylindrical AAA size (HR 11/45) () Typical Characteristics : 50mA x 16 hrs Time (hours) Typical Characteristics Nominal Voltage V Average 550 mah Capacity mah 35mΩ 50mA x 16hrs. 3 Low Rate 250mA x 2.4 hrs. 4 25mA x 32 hrs. 17mA x 48 hrs. < 6 months Storage < 1 week -10 to to to to to to / / /- 5 +0/ to to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system Capacity Ratio (%) : 50mA x 16 hrs. : -10 to 60 C : 100mA Cut off Voltage: V temperature: 25 C ( C) : 500mA x 16 hrs. 25 C : 100mA 10 C 25 C 60 C Time (hours) It(A) = Cn (Ah)/1h * [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours.
17 HHR70AAAJ Cylindrical HR AAA size (HR 11/45) () Typical Characteristics : 1It(650mA) x h at 0.20, 45 Rest: 1~3h : 1It(650mA) to V at Time (minutes) Typical Characteristics : 1It(650mA) x h at 20 Rest: 1h : 0.2It(130mA) to V at / / / / Time (minutes) Nominal Voltage V Storage < 3 months 720 mah 700 mah 30mΩ 70mA (0.1It) x 16hrs. 650mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 1It(650mA) x h at 20 Rest: 1 ~ 5h : 1It(650mA) to V at Time (minutes)
18 HHR75AAA/B Cylindrical AAA size (HR 11/45) () Typical Characteristics : 450mA (0.64 It) x hrs Time (minutes) Typical Characteristics / / / / : 450mA (0.64It) x hrs, 20. : mA (0.2It) Time (hours) Nominal Voltage V Storage < 3 months 730 mah 700 mah 35mΩ 70mA x 16hrs. 450mA x hrs. 0 to 45 0 to to to to to to to to to 131 : 450mA (0.64It) x hrs, 20. : mA (1It) 1400mA (2It) Time (hours)
19 HHR120AA Cylindrical 4/5AA size (HR 15/43) () Typical Characteristics : 600mA(1 It) hrs Time (minutes) Typical Characteristics : 1200mA(1 It) hrs,20 : / / / / mA(0.2 It) Time (hours) 6 Nominal Voltage V Storage < 3 months 1220 mah 1150 mah 19mΩ 120mA (0.1It) x 16hrs. 1200mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 1200mA(1 It) hrs,20 : mA(1 It) 2400mA(2 It) Time (minutes)
20 HHR150AA Cylindrical AA size (HR 15/51) () Typical Characteristics : 1500mA(1 It) hrs Time (minutes) Typical Characteristics : 1500mA(1 It) hrs,20 : / / / / mA(0.2 It) Time (hours) Nominal Voltage V Storage < 3 months 1580 mah 1500 mah 20mΩ 150mA (0.1It) x 16hrs. 1500mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 1500mA(1 It) hrs,20 : mA(1 It) 3000mA(2 It) Time (minutes)
21 HHR200A Cylindrical 4/5A size (HR 17/43) () Typical Characteristics : 1700mA(5 It) hrs Time (minutes) Typical Characteristics : 1700mA(1 It) hrs,20 : / / / / mA(0.2 It) Time (hours) Nominal Voltage V Storage < 3 months 2040 mah 2000 mah 20mΩ 200mA (0.1It) x 16hrs. 2000mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 1700mA(5 It) hrs,20 : mA(1 It) 4000mA(2 It) Time (minutes)
22 HHR200SCP Cylindrical 4/5SC size (HR 23/34) () Typical Characteristics : 2000mA(1 It) hrs Time (minutes) Typical Characteristics : 2000mA(1 It) hrs,20 Disharge : / /- 1+0/ / mA(1 It) Time (minutes) Nominal Voltage V < 2 years Storage < 6 months 2100 mah 1900 mah 5mΩ 200mA (0.1It) x 16hrs. 2000mA (1It) x hrs. 0 to 45 0 to to to to to to to 113 : 2000mA(1 It) hrs,20 Disharge : A 20A Time (minutes)
23 HHR210A Cylindrical A size (HR 17/50) () Typical Characteristics : 2100mA(1 It) hrs Time (minutes) Typical Characteristics / / / / : 2100mA(1 It) hrs,20 : mA(0.2 It) Time (hours) Nominal Voltage V Storage < 3 months 2200 mah 2100 mah 20mΩ 210mA (0.1It) x 16hrs. 2100mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 2100mA(1 It) hrs,20 : mA(1 It) 4200mA(2 It) Time (minutes)
24 HHR210AA/B Cylindrical AA size (HR 15/51) () Typical Characteristics : 1100mA (0.55 It), - V=5mV Time (hrs.) Typical Characteristics / / /- 9 +0/ : 200mA(0.1 It) x 16 hrs., 20 : mA (0.2It) Time (hours) Nominal Voltage Approx. internal Impedance Storage < 3 months V 2080mAh 2000mAh 25mΩ 200mA (0.1It) x 16 hrs. 1200mA (1It) x 2 hrs. C F 0 C to 45 C 32 F to 113 F 0 C to 40 C 32 F to 113 F -10 C to 65 C 14 F to 149 F -20 C to 35 C -4 F to 95 F -20 C to 45 C -4 F to 113 F -20 C to 55 C -4 F to 131 F : 1100mA (0.55It), - V, 20 : mA 2000mA (2It) (1It) Time (min.) It(A) = Cn (Ah)/1h * [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours.
25 HHR210AH Cylindrical A size (HR 17/50) () Typical Characteristics Time (hours) :210mA(0.1 It) 16hrs Typical Characteristics / / / / Capacity Ratio (%) : 210mA(0.1 It) 15hrs Disharge: 420mA(0.2 It),cut off voltage V Disharge : () Nominal Voltage Average 2 Capacity 1 Approx. internal Impedance Storage < 3 months < 1 week V 2050mAh 1900mAh 20mΩ 210mA (0.1It) x 16 hrs to to to to to 45-4 to to 55-4 to to 60-4 to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. : 210mA(0.1 It) 16hrs,25 Disharge: 420mA(0.2 It) Time (hours)
26 HHR250SCH Cylindrical SC size (HR 23/43) () Typical Characteristics : 0.1It x 15h at 25, 40, 60 : 0.1It to V at 25 Rest: 3h Capacity (mah) Typical Characteristics : 0.5It x 2.4h at 25 Rest: 1h : 1, 2, 3It to V at / /- 1+0/ / It 2It 3It Capacity (mah) 2 Nominal Voltage V Average 2650 mah Capacity mah 5mΩ 250mA x 16hrs. 3 Low Rate 1250mA x 2.4 hrs mA x 32 hrs. 83mA x 48 hrs. < 6 months Storage < 1 week -10 to to to to to to to to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system : 0.5It x 2.4h Rest: 1h : 10, 20, 30A to V at 20 10A 20A 30A Capacity (mah) It(A) = Cn (Ah)/1h * [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours.
27 HHR260SCP Cylindrical SC size (HR 23/43) () Typical Characteristics : 2600mA x hrs Time (minutes) Typical Characteristics : 2600mA x hrs., 20 : 2600mA, 0, 20, / /- 1+0/ / Time (minutes) 2 Nominal Voltage V Average 2600 mah Capacity mah 5mΩ 260mA x 16hrs. 2600mA x hrs. 0 to to to 65 Storage < 3 months -20 to to 55 1 After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 32 to to to to to 131 : 2600mA x hrs., 20 : 10A, 20A, 20 10A 20A Time (minutes) It(A) = Cn (Ah)/1h * [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours.
28 HHR300CH Cylindrical C size (HR 26/50) for backup use () Typical Characteristics : 300mA(0.1 It) x 16hrs Time (hours) Typical Characteristics /- 2+0/ /- 7+0/ Capacity Ratio (%) : 300mA (0.1 It) x 16 hrs. : -10 to : 600mA (0.2 It) 40 Cut-off Voltage: V : ( C) Nominal Voltage V Average 2 Capacity 1 3 Low Rate Low Rate Storage < 3 months 3300 mah 3100 mah 5mΩ 300mA (0.1It) x 16hrs. 1500mA (1It) x 2.4 hrs. 4 0 to to to to to mA x 32 hrs. 100mA x 48 hrs. 32 to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system are used. In order to maximize battery safety, please consult Panasonic when determining charge / discharge specs, warning label contents : 300mA(0.1It) x 16 hrs., 25 C : 10A, 20A, 25 C 10A 20A Time (minutes)
29 HHR300SCP Cylindrical SC size (HR 23/43) () Typical Characteristics : 3000mA(1 It) hrs Time (minutes) Typical Characteristics Nominal Voltage V < 2 years Storage < 6 months / / mah 2800 mah 4mΩ 300mA (0.1It) x 16hrs. 3000mA (1It) x hrs. 0 to 45 0 to to to / / to to to to 113 : 3000mA(1 It) hrs,20 Disharge : mA(1 It) Time (minutes) : 2000mA(1 It) hrs,20 Disharge : A 20A Time (minutes)
30 HHR330APH Cylindrical L-Fat A size (HR 18/67) () Typical Characteristics : 330mA(0.1 It) 16hrs Time (hours) Nominal Voltage V Average 3300 mah Capacity mah 5.5mΩ 330mA x 16hrs. 3 Low Rate 1650mA x 2.4 hrs mA x 32 hrs. 110mA x 48 hrs. < 6 months Storage < 1 week / / / / to to to to to to to to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system and unit design. Typical Characteristics Capacity Ratio (%) : 330mA(0.1 It) 16hrs 40 Disharge: 660mA(0.2 It),cut off voltage V Disharge : () : 330mA(0.1 It) 16hrs, 20 : 20 10A 20A Time (min.)
31 HHR370AH Cylindrical L-Fat A size (HR 18/67) () Typical Characteristics : 330mA(0.1 It) 16hrs Time (hours) Nominal Voltage V Average 3700 mah Capacity mah 20mΩ 370mA x 16hrs. 3 Low Rate 1750mA x 2.4 hrs mA x 32 hrs. 123mA x 48 hrs. < 6 months Storage < 1 week / / / / to to to to to to to to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system and unit design. Typical Characteristics Capacity Ratio (%) : 330mA(0.1 It) 15hrs 40 Disharge: 660mA(0.2 It),cut off voltage V Disharge : () : 330mA(0.1 It) 16hrs,25 Disharge: 660mA(0.2 It) Time (hours)
32 HHR380A Cylindrical L-A size (HR 17/67) () Typical Characteristics : 2000mA- V=10mV Time (minutes) Typical Characteristics : 2000mA dt/dt=/min,20 Disharge : / / / / mA(0.2 It) Time (hours) Nominal Voltage V 3800 mah 3700 mah 25mΩ *** 370mA (0.1It) x 16hrs. 2000mA dt/dt 0 to to to to to to 149 Storage < 3 months -20 to 45-4 to to 55-4 to 131 *** For rapid charge: use dt/dt charge termination method. Refer to the Nickel Metal Hydride Methods section for further details. : 2000mA,dT/dt=/min.20 Disharge : mA(0.53 It) 3800mA(1 It) Time (minutes)
33 HHR450A Cylindrical L-fat A size (HR 18/67) () Typical Characteristics : 1500mA- V=10mV Time (minutes) Typical Characteristics : 2000mA dt/dt=/min,20 Disharge : / / / / mA(0.2 It) Time (hours) Nominal Voltage V *** Storage < 3 months 4500 mah 4200 mah 25mΩ 420mA (0.1It) x 16hrs. 2000mA dt/dt 0 to 45 0 to to to to to to to to to 131 *** For rapid charge: use dt/dt charge termination method. Refer to the Nickel Metal Hydride Methods section for further details. : 2000mA dt/dt=/min,20 Disharge : mA(0.44 It) 4500mA(1 It) Time (minutes)
34 HHR60AAAH Cylindrical AAA size (HR 11/45) () Typical Characteristics : 50mA x 16 hrs Time (hours) Typical Characteristics Nominal Voltage V Average 550 mah Capacity mah 35mΩ 50mA x 16hrs. 3 Low Rate 250mA x 2.4 hrs. 4 25mA x 32 hrs. 17mA x 48 hrs. < 6 months Storage < 1 week -10 to to to to to to / / /- 5 +0/ to to to to to to After charging at 0.1It for 16 hours, discharging at 0.2It. 2 For reference only. 3 Need specially designed control system Control System: dt/dt cut-off; 1 to 2 C/min - V cut-off; - V per cell = 5 to 10 mv T-control; T=65 C charger timer; 2.4h (at 5a) Trickle timer; within 2h 4 With control system Capacity Ratio (%) : 50mA x 16 hrs. : -10 to 60 C : 100mA Cut off Voltage: V temperature: 25 C ( C) : 500mA x 16 hrs. 25 C : 100mA 10 C 25 C 60 C Time (hours) It(A) = Cn (Ah)/1h * [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours.
35 HHR70AAAJ Cylindrical HR AAA size (HR 11/45) () Typical Characteristics : 1It(650mA) x h at 0.20, 45 Rest: 1~3h : 1It(650mA) to V at Time (minutes) Typical Characteristics : 1It(650mA) x h at 20 Rest: 1h : 0.2It(130mA) to V at / / / / Time (minutes) Nominal Voltage V Storage < 3 months 720 mah 700 mah 30mΩ 70mA (0.1It) x 16hrs. 650mA (1It) x hrs. 0 to 45 0 to to to to to to to to to 131 : 1It(650mA) x h at 20 Rest: 1 ~ 5h : 1It(650mA) to V at Time (minutes)
36 HHR75AAA/B Cylindrical AAA size (HR 11/45) () Typical Characteristics : 450mA (0.64 It) x hrs Time (minutes) Typical Characteristics / / / / : 450mA (0.64It) x hrs, 20. : mA (0.2It) Time (hours) Nominal Voltage V Storage < 3 months 730 mah 700 mah 35mΩ 70mA x 16hrs. 450mA x hrs. 0 to 45 0 to to to to to to to to to 131 : 450mA (0.64It) x hrs, 20. : mA (1It) 1400mA (2It) Time (hours)
NI-MH HANDBOOK INDUSTRIAL BATTERIES APPLICATIONS
NI-MH HANDBOOK ENGLISH INDUSTRIAL BATTERIES APPLICATIONS Garden tool Shaver Marine device Electrical vehicle Two way radio Power tool Hand held scanner Vacuum cleaner To o t h b r u s h D e f i b r i l
EVERGREEN (C.P.) USA INC. TEL: (650) 952-8091 FAX: (650) 952-3629 E-MAIL: sales@evergreencpusa.com. SPECIFICATIONS Lithium Battery CR123A- 1700mAh
Voltage (V) Voltage (V) Voltage (V) EVERGREEN (C.P.) USA INC. SPECIFICATIONS Lithium Battery CR123A- 1700mAh Temperature characteristics(20ma) (mah) Pulse discharge characteristics Model CR123A Nominal
Lithium Ion Battery Specifications
Lithium Ion Battery Specifications Type: Cylindrical Lithium Iron Phosphate Battery Mode: LFP-26650-3300 AA Portable Power Corp. Prepared by Checked by Approved by 1 . Product Specifications Type ------------
Getting started with the Super Brain Palm computer interface.
Getting started with the Super Brain Palm computer interface. Step 1: Connect the RB502 interface cable to your Super Brain Palm Charger. Step 2: Connect the USB interface to your computers USB port. Step
Alkaline-Manganese Dioxide
Performance Characteristics The performance characteristics described in Sections. through.9 are those characteristics specific to the alkaline-manganese dioxide products manufactured and distributed by
1. Scope This specification is applied to ICR18650. 2. Product Specification Table 1 No. Item Rated Performance Remark
1. Scope This specification is applied to ICR18650. 2. Product Specification Table 1 No. Item Rated Performance Remark 1 Rated Capacity Typical Minimum 2 Nominal Voltage 3.7V 3 Voltage at end of Discharge
Specification. Li-ion Rechargeable Battery
Specification of Li-ion Rechargeable Battery Model No.: 18650CA-1S-3J Reported by: 陈 声 宇 Date: Oct,17,2013 Checked by: Approved by: Date: Date: 1. Scope This specification describes the definition, technical
PRODUCT SPECIFICATION
Lithium Ion LG 18650HE4 2500mAh BCY-PS-HE4-Rev0 2013-05-30 0 PRODUCT SPECIFICATION Rechargeable Lithium Ion Battery Model : 18650HE4 2500mAh LG Twin Towers 128, Yeoui-daero, Yeongdeungpo-gu, Seoul, Republic
LITHIUM BATTERY CR123A SPECIFICATION
LITHIUM BATTERY CR123A SPECIFICATION Date: April 24, 2012 Approved by: Scotty Scott PANASONIC ENERGY CORPORATION OF AMERICA LITHIUM BATTERY DIVISION 1. Designation : CR123A 2. Nominal Voltage : 3 V 3.
Li-ion Rechargeable Battery. Specification
Customer: Specification Model: GMB043450S Prepared By/Date Checked By/Date Approved By/Date Note:1.Kindly please sign on the above and send it back to us if the sample is approved. 2.Kindly please contact
It is strongly recommended to completely read this manual before use! Damage resulting from misuse or modification will void your warranty.
INSTRUCTION MANUAL The Onyx 100 charger is perfect for entry-level electric car or boat modelers who want automatic peak detection charger for NiCd and NiMH batteries, and that will accept AC or DC input
Approval Sheet for. Li-ion Battery (Lithium Iron Phosphate) Model: LiR14505F-600mAh
Approval Sheet for Li-ion Battery (Lithium Iron Phosphate) Model: LiR14505F-600mAh AA Portable Power Corp (http://www.batteryspace.com) Address: 860 S, 19th St, Unit A, Richmond, CA, 94804 Tel: 510-525-2328
Ni-MH Rechargeable Batteries
Table of Contents Ni-MH Rechargeable Batteries 1 Introduction 2 General Characteristics 3 Composition and Chemistry 3.1 Active Components: Positive and Negative Electrodes 3.2 Electrolyte 3.3 Cell Reactions
Spec. No. ICR18650-26C Version No. 0.0
1. Scope This product specification has been prepared to specify the rechargeable lithium-ion cell 2. Description and Model 2.1 Description Cell (lithium-ion rechargeable cell) 2.2 Model ICR18650-26C 3.
SANYO New eneloop Batteries Remains Capacity Longer
06. Oct, 2011 SANYO New eneloop Batteries Remains Capacity Longer Fully-recharged new eneloop keeps approx. 70% of power after 5 years of storage *1 Tokyo, October 6, 2011 - SANYO Electric Co., Ltd. (SANYO),
NI-ZN BATTERY SPECIFICATION
NI-ZN BATTERY SPECIFICATION 252000 Model Name: AA2500mWh(Ni-Zn) Issued Date: Sept. 2010 NICKEL ZINC BATTERY SPECIFICATION 1.APPLICATION The applicable range: This specification is available only for the
Smart Batteries and Lithium Ion Voltage Profiles
Smart Batteries and Lithium Ion Voltage Profiles Louis W. Hruska, Director Rechargeable Batteries Duracell Worldwide Technology Center, 37A Street, Needham MA 02194 Abstract: This paper addresses how the
Li-Polymer Battery Technology Specification
Li-Polymer Battery Technology Specification Customer Part name Li-Polymer Battery Model No LIPO 552035 350mAh 3.7V Serial No Produce No Approved by Drafted by Xiao li Checked by Signed by Wenfei liang
What are the technical features and performance of the AccuCell system?
What is AccuCell? AccuCell is an alkaline-manganese battery system that allows recharging while preserving the advantages of disposable alkaline cells. The first batteries of this kind were developed in
Handbook. We aim to bequeath a beautiful Earth for our future generations.
We aim to bequeath a beautiful Earth for our future generations. What can we do as a leading company for energy and environment? We can start from what we have; our unique technology and innovative creativity
DC Electronic Loads 8500 series
Data Sheet DC Electronic Loads 8500 series 2400W 600 W - 1200 W 300 W Versatile & Economical DC Electronic Loads The 8500 series Programmable DC Electronic Loads can be used for testing and evaluating
Product Specification
Specification No. Cylindrical Li 一 ion Battery Pack Model:18650 3.7v 2200mAh Hunan Sounddon New Energy Co.,Ltd Address : NO. 78, Benchi West Road, Jiuhua Demonstration District, Xiangtan City, Hunan Province,
Battery Charger For Nickel Cadmium and Nickel-Metal Hydride Rechargeable Batteries Model PSN Series
Battery Charger For Nickel Cadmium and Nickel-Metal Hydride Rechargeable Batteries Model PSN Series Operating Instructions WARNING CONCERNING THE REMOVAL OF COVER: CAUTION: TO PREVENT THE RISK OF ELECTRIC
#178 Maintenance and Care of 3M Powered Air Purifying Respirator (PAPR) Battery Packs
#178 Maintenance and Care of 3M Powered Air Purifying Respirator (PAPR) Battery Packs Published: November, 2008, Revised November 2010 Supersedes TDB # 130, 144, 151, 169 Introduction Battery packs are
Specification Approval Sheet
GUANGZHOU MARKYN BATTERY CO., LTD. Specification Approval Sheet FOR LIPO BATTERY Product Name Model SPEC Company Name Document Number Li-ion Polymer Battery 062025/250mAh/3.7V GMB POWER GMB1102150615 Sample
2006 Honda Civic-8725 Hybrid Battery Test Results
2006 Honda Civic-8725 Hybrid Battery Test Results HEVAMERICA U.S. DEPARTMENT OF ENERGY ADVANCED VEHICLE TESTING ACTIVITY Hybrid System Specifications Battery Specifications Manufacturer: Panasonic Battery
BB800 Off-Grid Solar System
BB800 Off-Grid Solar System KEY PRODUCT FEATURES Control Box & Charge Controller 1000W of Solar Panels 4x200Ah of SLA Batteries in series 2KW Inverter Output Power Solar Panel & Battery Mounting Our entry
OPERATING INSTRUCTIONS
Manual No 4159 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS NAVY BATTERY CHARGER / ANALYZER P/N 4159 MODEL CA-1550 NSN: 4920-01-498-2543 Issued By: Power Products Inc. 27 Pamaron Way, Suite E Novato,
Application Note 82 Using the Dallas Trickle Charge Timekeeper
www.maxim-ic.com Application Note 82 Using the Dallas Trickle Charge Timekeeper DESCRIPTION The Dallas Semiconductor/Maxim real-time clock (RTC) family contains a number of parts within an integrated trickle-charging
Product Specification
Sheet 1/7 Polymer Lithium-ion Battery (For high discharge ratio battery) Model:GEB201212C General Electronics Battery Co., Ltd. Address: Huihuang Industrial Building, Huada Road, Dalang, Longhua, Baoan
NC2000 Charge Controller for Nickel-Cadmium and Nickel-Metal Hydride Batteries
NC2000 Charge Controller for Nickel-Cadmium and Nickel-Metal Hydride Batteries General Description The NC2000 is a device designed to intelligent charge either nickel-cadmium (NiCad) or nickel-metal hydride
Capacity Testing of VRLA Batteries (20 to 200 Ampere-Hours Capacity)
TECHNICAL BULLETIN 41-7135 Capacity Testing of VRLA Batteries (20 to 200 Ampere-Hours Capacity) 41-7135/0412/CD www.cdtechno.com The VRLA battery is rated in ampere-hours or watts per cell (w/c) at specific
TABLE OF CONTENTS INTRODUCTION AND BATTERY TERMINOLOGY... 3
TABLE OF CONTENTS INTRODUCTION AND BATTERY TERMINOLOGY........ 3 TECHNOLOGY COMPARISON...................4-5 Primary Alkaline Nickel-Cadmium and Nickel-Metal Hydride Lithium-Ion RECHARGEABLE ALKALINE AA
International English
2 International English NOTICE TO READERS It is the responsibility of each user to ensure that each battery application system is adequately designed safe and compatible with all conditions encountered
Alkaline Manganese (Mercury free) IEC: LR03; JIS: AM-4; ANSI: AAA; MN2400; Micro chemical system: Zn / KOH-H 2 O / MnO 2
IEC: LR03; JIS: AM-4; ANSI: AAA; MN2400; Micro rated: 1200 mah discharge at 10mA load; 24hours/day 1070 mah discharge at 75ohms load; 24hours/day minimum: 1050 mah discharge at 20mA constant current 300
Lithium-ion Battery Specification
Document NO.: WI-FHF-CS-N35SL-A Page 1of 9 Lithium-ion Battery Specification PROJECT NAME CS-N35SL Environmental : ROHS RoHS NO Support AUTHORIZED SIGNATURE & COMPANY CHOP APPROVED CHECKED PREPARED TABLE
Rechargeable Button Cells
Rechargeable Button Cells NiMH Sales Program and Technical Handbook www.varta-microbattery.com Rechargeable Button Cells Content 1. General Information 3 8 1.1 Product families 4 6 1.2 General Design and
BAO TONG USA dba TYSONIC BATTERY. SPECIFICATION SHEET FOR 9V NI-MH RECHARGEABLE BATTERY TY-9V-200mAH
BAO TONG USA dba TYSONIC BATTERY SPECIFICATION SHEET FOR 9V NI-MH RECHARGEABLE BATTERY TY-9V-200mAH I. GENERAL INTRODUCTION 1. Main Features 1) Friendly To The Environment Cd 0% Hg0% Pb0% 2) High Energy
Using Cell Balancing to Maximize the Capacity of Multi-cell Li-Ion Battery Packs
Using Cell Balancing to Maximize the Capacity of Multi-cell Li-Ion Battery Packs Introduction Common multiple cell configurations for LiIon cells in battery packs consist of three or four cells in series,
0.9V Boost Driver PR4403 for White LEDs in Solar Lamps
0.9 Boost Driver for White LEDs in Solar Lamps The is a single cell step-up converter for white LEDs operating from a single rechargeable cell of 1.2 supply voltage down to less than 0.9. An adjustable
063450 LI-POLYMER BATTERY PACKS. Specification. Type:063450 1000mAh. Prepared/Date Auditing/Date Approved/Date WANG MAR 16, 2006 LI MAR 16, 2006
063450 LI-POLYMER BATTERY PACKS Specification Type:063450 1000mAh Prepared/Date Auditing/Date Approved/Date WANG MAR 16, 2006 LI MAR 16, 2006 XIONG MAR 16, 2006 Sheet 1/5 1 Scope This product specification
Height w/o Terminals (in)
EaglePicher Technologies, LLC Commercial Power P.O. Box 47 Joplin, MO 6482 (417) 623-8 inquiry.carefree@eaglepicher.com Carefree Sealed Lead Acid (SLA) MSDS EaglePicher s Carefree lead acid batteries are
Energizer Non-Rechargeable Batteries: Frequently Asked Questions
Click on the question to view the answer: 1. Is it a good idea to store batteries in a refrigerator or freezer? 2. Why is mixing batteries of different chemistries, brands or age a potential problem? 3.
High Efficiency Battery Charger using Power Components [1]
![High Efficiency Battery Charger using Power Components [1]](/thumbs/40/21622985.jpg "High Efficiency Battery Charger using Power Components [1]")
application note TPB:101 High Efficiency Battery Charger using Power Components [1] Marco Panizza Senior Applications Engineer July 2006 Contents Page Introduction 1 A Unique Converter 1 Control Scheme
Carefree Sealed Lead Acid (SLA) MSDS
EaglePicher Technologies, LLC Commercial Power P.O. Box 47 Joplin, MO 6482 (417) 623-8 inquiry.carefree@eaglepicher.com Carefree Sealed Lead Acid (SLA) MSDS EaglePicher s Carefree lead acid batteries are
ADJUSTABLE VOLTAGE AND CURRENT REGULATOR
L200 ADJUSTABLE VOLTAGE AND CURRENT REGULATOR ADJUSTABLE OUTPUT CURRENT UP TO 2 A (GUARANTEED UP TO Tj = 150 C) ADJUSTABLE OUTPUT VOLTAGE DOWN TO 2.85 V INPUT OVERVOLTAGE PROTECTION (UP TO 60 V, 10 ms)
High-power battery for back-up of telematic systems in cars
High-power battery for back-up of telematic systems in cars by Dr. Thomas Dittrich, Tadiran Batteries GmbH When it comes to batteries in cars, people usually refer to the SLI battery. Since fuel is getting
In The fastest growing battery system, lithium ion (Li-ion) batteries are used where high-energy density and
WHITE PAPER Selection, Use and Timely Replacement of Lithium Ion Batteries In The fastest growing battery system, lithium ion (Li-ion) batteries are used where high-energy density and light weight is of
PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages
DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected
RECHARGEABLE BATTERY CONSIDERATIONS IN PORTABLE EQUIPMENT
SECTION 5 BATTERY CHARGERS Walt Kester, Joe Buxton INTRODUCTION Rechargeable batteries are vital to portable electronic equipment such as laptop computers and cell phones. Fast charging circuits must be
Torfino Enterprises, Inc.
Torfino Enterprises, Inc. An independent study of commercially available 9 volt rechargeable battery technology for implementation and use with the ICE LIGHT & METAL-TEC 1400 Product line Written By: Nicholas
SANYO ENELOOP, The Ultimate NiMH Rechargeable AA & AAA Batteries.
SANYO ENELOOP, The Ultimate NiMH Rechargeable AA & AAA Batteries. All of us have had the misfortune of AA or AAA batteries going DEAD in a device at the most inappropriate time and discovering there are
Maintenance-free sealed lead accumulators. HAGEN drysafe
Maintenance-free sealed lead accumulators HAGEN drysafe HAGEN drysafe batteries are rechargeable and maintenance-free sealed lead accumulators with flat pasted grid-plates and bonded electrolyte in glass-fibre
QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 735 LITHIUM-ION LINEAR BATTERY CHARGER WITH LDO REGULATOR
DESCRIPTION QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 735 LTC4063EDD Demonstration circuit 735 is a complete constantcurrent, constant-voltage battery charger for one Lithium-Ion cell and includes a
Smart Battery Module with LEDs and Pack Supervisor
Features Complete smart battery management solution for Li-Ion battery packs Accurate measurement of available battery capacity Provides overvoltage, undervoltage, and overcurrent protection Designed for
Plena Two-zone Call Station. Installation and User Instructions PLE-2CS
Plena Two-zone Call Station en Installation and User Instructions PLE-2CS Plena Two-zone Call Station Installation and User Instructions Important safeguards en 2 Important safeguards Before installing
Product Specification
Specification No. Q/WAPL523334-1011 Polymer Lithium-ion Battery Model:523334 500mAh Prepared by:sunping Checked by:zhu Qi Approve by: Jin Gang All 10 pages 1 Scope 2/10 This product specification describes
Radio Control System
Radio Control System The Radio Control System consists of the control transmitter unit held by the operator and the receiver with its associated components in the robot. The Radio Control Transmitter converts
Performance Testing of Lithium-ion Batteries of Various Chemistries for EV and PHEV Applications
Performance Testing of Lithium-ion Batteries of Various Chemistries for EV and PHEV Applications Andrew Burke University of California-Davis Institute of Transportation Studies 2009 ZEV Symposium Sacramento,
Li-ion Polymer Battery Specification
Customer: ME1421A Li-ion Polymer Battery Specification Model:HPL302030-130mAh Checked & Approved by Prepared by Date Andy Liu Wang Wei 2014-7-18 History of revisions Edition Prepared by Approved by Date
Nickel Metal Hydride (NiMH) Handbook and Application Manual
(NiMH) The number of portable battery operated electronic devices has grown tremendously. Consumers can be confused as to which battery to buy for these devices. This handbook will provide a better understanding
The definite Guide to Power connectors, Charging, and other Power related questions for the #11 Keychain Camera
The definite Guide to Power connectors, Charging, and other Power related questions for the #11 Keychain Camera The same questions are being asked over and over again. I hope that this guide will clarify
IMPACT IMPACT. LifeSaver Series. IPT Lithium Polymer. When safety & budgets depend on your battery.
Impact Power Technologies was founded to design and manufacture the highest quality, safest, most efficient batteries on the market. We have more than 30 years experience with all battery chemistries, from
PSC-A5 Solar Charge Controller Manual
( 5A, 12V/24V Output, Double Mode ) 1. Introduction: This controller is suitable for 12V and 24V solar photovoltaic system. The charge and discharge current is 5A. The maximum solar panel for 12V system
BlueSolar Pro Remote Panel For BlueSolar PWM-Pro charge controllers 12/24V 5, 10, 20, 30A Article number SCC900300000
Manual EN BlueSolar Pro Remote Panel For BlueSolar PWM-Pro charge controllers 12/24V 5, 10, 20, 30A Article number SCC900300000 Contents EN 1.Important safety instructions... 2 2. Installation... 2 3.Product
IMPACT LifeSaver Series IPT Lithium Polymer IMPACT LifeSaver Series Impact Power Technologies, LLC
IPT LifeSaver Series IMPACT Power Technologies, LLC LifeSaver Series The batteries that last 24+ hours on a charge for 900+ cycles IMPACT Power Technologies, LLC IPT LifeSaver Series Lithium Polymer Batteries
"Charging Lithium-Ion Batteries: Not All Charging Systems Are Created Equal"
"Charging Lithium-Ion Batteries: Not All Charging Systems Are Created Equal" By Scott Dearborn Principal Applications Engineer Microchip Technology Inc. 2355 West Chandler Blvd Chandler, AZ 85224 www.microchip.com
Guidance for upgrading to GB4943.1-2011 (IEC 60950-1: 2005, MOD)
Guidance for upgrading to GB4943.1-2011 (IEC 60950-1: 2005, MOD) Note: This guidance document is a translation of official Chinese document which is issued by CQC (China Quality Certification Center) on
Product Specification
==== Specification No. = Edition No. ====== ===== =1.0====== Polymer Lithium-ion Battery Product Specification Model:503562 1200mAh Hunan Sounddon New Energy Co., Ltd Address:No.98, Fuzhou Road,Jinhua
INSTRUCTION MANUAL INDEX
DTXP4245 INSTRUCTION MANUAL The Onyx 245 charger is two chargers in one! Identical twin outputs make the 245 an excellent choice for models that use two battery packs or modelers who rotate through multiple
DELIVERY SPECIFICATIONS
DELIVERY SPECIFICATIONS Chemistry: Alkaline Manganese Dioxide Battery Model No.: HQ-ALK-AAA-01 Customer comment: Total pages: 5 (including this cover page) 1. Scope This specification governs the performance
Superior Lithium Polymer Battery
Superior Lithium Polymer Battery July 18, 2003 KOKAM ENGINEERING CO., LTD Dimension Specifications Specifications NO ITEM SPECIFICATIONS REMARKS 1 Nominal Capacity *1 TYP.1500mAh 2 Nominal Voltage 3.7
High Energy Rechargeable Li-S Cells for EV Application. Status, Challenges and Solutions
High Energy Rechargeable Li-S Cells for EV Application. Status, Challenges and Solutions Yuriy Mikhaylik, Igor Kovalev, Riley Schock, Karthikeyan Kumaresan, Jason Xu and John Affinito Sion Power Corporation
How to control Charge Monitor application (chargers A section, balancers B and C section)
How to control Charge Monitor application (chargers A section, balancers B and C section) A) Section Charger Run Charge Monitor program by clicking on its shortcut. Connect USBCOM+ to your PC (or connect
Thyristor-controlled power supplies and battery chargers
Thyristor-controlled power supplies and battery chargers Input voltage: 115 / 230 VAC, single phase, 50 / 60 Hz or 208 / 400 / 480 VAC, three phases, 50 / 60 Hz Output voltage: 12 / 24 / 48 / 60 / 72 /
Title Li-ion Battery Specifications (Steel) Page 1/11
Title Li-ion Battery Specifications (Steel) Page 1/11 1. Scope This Specification is applied to rechargeable lithium ion battery cell of the following mentioned type for various applications in mobile
Mobile Data Power Model: MDP-25
Mobile Data Power Model: MDP-25 Topic Section Features... 2 Operational Features Summary... 2 Back-up Battery Power Internal Charger Voltage Spike Protection RF Noise Filtering Warning of Imminent Loss
Handheld portable appliance testers
PAT100 SERIES Handheld portable appliance testers PAT100 SERIES Handheld portable appliance testers Simple Tick/Cross, pass/fail indication plus measurement Battery powered with rechargeable options Includes
1.5 Volt vs. 1.2 Volt Batteries
1.5 Volt vs. 1.2 Volt Batteries by Roy Lewallen Very often I ve read statements like 1.2 volt NiMH cells can t be used in some equipment designed for 1.5 volt alkaline cells because the voltage is too
Manual for Laser Pointer
GB Manual for Laser Pointer TABLE OF CONTENTS GB MANUAL FOR LASER POINTER...8 INTRODUCTION... 8 FACTS ABOUT LASER LIGHT... 8 How strong is the light in the Laser Pointer?... 8 ATTACHING THE LASER... 9
LM138 LM338 5-Amp Adjustable Regulators
LM138 LM338 5-Amp Adjustable Regulators General Description The LM138 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5A over a 1 2V to 32V output range
2.996/6.971 Biomedical Devices Design Laboratory Lecture 4: Power Supplies
2.996/6.971 Biomedical Devices Design Laboratory Lecture 4: Power Supplies Instructor: Dr. Hong Ma Sept. 19, 2007 Key Problem Ideal voltage sources do not exist! Voltage regulators use feedback to reduce
Renewable Energy Test Station (RETS) TEST PROCEDURES FOR SOLAR TUKI
Renewable Energy Test Station (RETS) TEST PROCEDURES FOR SOLAR TUKI March 2007 A. Test Procedures for Solar Tuki Lamp S. No. Test Parameters Technical Requirements Instruments Required Test Methods A.
;l ~~! I!July 1993 Doc: IEEE P802.11-93/94a. Power Management. The importance of Power Management provisions in the MAC. By: Wim Diepstraten NCR.
;l ~~! I I!July 1993 Doc: IEEE P802.11-93/94a I Power Management The importance of Power Management provisions in the MAC By: Wim Diepstraten NCR. IJuly 1993 Wireless Network Applications Mobile computing
SOLAR300N Rel. 1.03 21/01/10
Photovoltaic installation certifier + professional network analyzer Pag 1 of 5 1. SOLAR300N MAIN FEATURES SOLAR300N performs all tests on PV plants by using of SOLAR-02 remote unit which, after a preliminary
Important Safety Instructions
PR-D7 GB Revision 1 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean
Application Manual. Nickel Cadmium 11/06/01 Page 1 of 12
Page 1 of 12 Nickel Cadmium Batteries Application Manual The nickel-cadmium battery is a remarkable device. More than fifty years of successful use has proved this point. Nickel-cadmium batteries may be
www.lascarelectronics.com
FEATURES 0-30V d.c. measurement range Logging rates between 1s and 12hr Stores readings Connection via two screw terminals USB interface for set-up and data download User-programmable alarm thresholds
SELECTION GUIDE FIFTH EDITION
SELECTION GUIDE FIFTH EDITION GENESIS Selection Guide TABLE OF CONTENTS Company background EnerSys 2 Services and applications 3 Features and benefits 4 Technical information Capacity as a function of
li-ion Polymer Battery Specification
Customer: li-ion Polymer Battery Specification MODEL: GMB042035 Prepared By/Date Checked By/Date Approved By/Date Note:1.Kindly please sign on the above and send it back to us if the sample is approved.
Designing Applications with Lithium-Ion Batteries
Application Note Roland van Roy AN025 Sep 2014 Designing Applications with Lithium-Ion Batteries Contents 1. Introduction...1 2. Single Li-Ion Cell as Power Source...2 3. Battery Charging...6 4. Battery
VARTA EasyPack. design-in handbook. The easy way to power portable devices! See also: http://www.varta-microbattery.com/top/ezp
VARTA EasyPack design-in handbook The easy way to power portable devices! See also: http://www.varta-microbattery.com/top/ezp VARTA EasyPack design-in handbook Page 1 of 14 VARTA Microbattery GmbH Table
1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
bq2114 NiCd or NiMH Gas Gauge Module with Charge-Control Output Features General Description Pin Descriptions
Features Complete bq2014 Gas Gauge solution for NiCd or NiMH battery packs Charge-control output allows communication to external charge controller (bq2004) Battery information available over a single-wire
LM117 LM317A LM317 3-Terminal Adjustable Regulator
LM117 LM317A LM317 3-Terminal Adjustable Regulator General Description The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1 5A over a 1 2V to 37V
Constant Voltage Charger Selection for VRLA Batteries
TECHNICAL BULLETIN 41-2129 Constant Voltage Charger Selection for VRLA Batteries Please Note: The information in this technical bulletin was developed for C&D Dynasty 12 Volt VRLA products. While much
POWER GENERATION AND DISTRIBUTION SYSTEM DESIGN FOR THE LEONIDAS CUBESAT NETWORK
POWER GENERATION AND DISTRIBUTION SYSTEM DESIGN FOR THE LEONIDAS CUBESAT NETWORK Justin M. Akagi Department of Electrical Engineering University of Hawai`i at Manoa Honolulu, HI 96822 ABSTRACT The Power
SA57608 One-cell Lithium-ion battery protection with over/undercharge and overcurrent protection
INTEGRATED CIRCUITS Supersedes data of 2001 Oct 03 2003 Oct 29 GENERAL DESCRIPTION The is a single-cell Li-ion protection IC, and is an improved version of the NE57600, with different pinout. Its over
Power Management: SCM
Product SCM SCM SCM consists of a fuel gauge and a protection circuit that make a battery function more powerfully. Normally it will realize the power management functions. Fuel Gauge Circuit monitors
MC33340P MC33342D BATTERY FAST CHARGE CONTROLLERS
Order this document by MC40/D The MC40 and MC4 are monolithic control IC s that are specifically designed as fast charge controllers for Nickel Cadmium (NiCd) and Nickel Metal Hydride (NiMH) batteries.