Composite Manhole Covers
|
|
|
- Gwenda Newton
- 7 years ago
- Views:
Transcription
1 Composite Manhole Covers Shaping future standards
2 One Superior Standard - No cracking, no delamin slip resistant, they will not spin out and have injury Watertight Flat Sealed Covers The leading watertight, easy to remove, non-bolting composite manhole cover on the market is available in a range of sizes and load ratings. FL90, FL100 & are suitable for tank sump access. The smaller covers are suitable for direct fill, remote fill, manual dip, monitoring well & drawpit access. Locks available. Standard covers are designed to meet and exceed the (25 ton) load rating. FL90 FL100 FL100/D400* FL90 FL90/D400* 0 0/D400* FL600 FL600/D400* FL180 FL180/D400* FL120 FL120/MW FL120/GP 1020mm dia. flat sealed cover & composite frame 1020mm dia. flat sealed cover & composite frame 900mm dia. flat sealed cover & composite frame 900mm dia. flat sealed cover & composite frame 760mm dia. flat sealed cover & composite frame 760mm dia. flat sealed cover & composite frame 600mm dia. flat sealed cover & composite frame 600mm dia. flat sealed cover & composite frame 450mm dia. flat sealed cover & composite frame 450mm dia. flat sealed cover & composite frame 300mm dia. flat sealed cover & composite frame 300mm dia flat sealed cover & composite frame with monitoring well ID plate 300mm dia flat sealed cover & composite frame with grounding point ID plate FL140 FL140/D400* FL900 FL900/D400* FL96 FL96/D400* /D400* FL60 FL60/D400* FL x 700mm flat sealed cover & aluminium frame 1400 x 700mm flat sealed cover & aluminium frame 900 x 900mm flat sealed cover & aluminium frame 900 x 900mm flat sealed cover & aluminium frame 900 x 600mm flat sealed cover & aluminium frame 900 x 600mm flat sealed cover & aluminium frame 760 x 760mm flat sealed cover & aluminium frame 760 x 760mm flat sealed cover & aluminium frame 600 x 600mm flat sealed cover & aluminium frame 600 x 600mm flat sealed cover & aluminium frame 450 x 450mm flat sealed cover & aluminium frame Multi-Port Covers A break-through in composite technology enabled the launch of our new premium range of multi-port covers. Our lightweight composite, non-bolting covers, include two ports to give direct access to fill and vapor recovery or dip risers inside the tank sump. Ports are located at 406mm centres. Fill caps can be colour coded to identify the fuel grade and can be attached with a chain to prevent incorrect fuel drops into the tank. Additional product ID plates can be fixed to the main cover. Designed and tested to meet and exceed the (25 ton) load rating. FL100/MP FL90/MP 1020mm dia. flat sealed multi-port cover and composite frame 900mm dia. flat sealed multi-port cover and composite frame
3 ation, no deflection or permanent set, anti-static, free single person ergonomic removal Manual Dip Port Covers Designed for quick and easy access to a manual dip stick located inside a tank sump, the FL90 central and offset dip covers offer the perfect solution. Our lightweight composite, non-bolting covers have an integral seal on both the main cover and dip cap. Dip caps can be colour coded to the fuel grade and can be chained to the main cover for added security. Standard covers are designed to meet and exceed the (25 ton) load rating. FL90/CD 900mm dia. cover with centre dip port FL90/OD 900mm dia. cover with offset dip port FL90/CD/D400* 900mm dia. cover with centre dip port FL90/OD/D400* 900mm dia. cover with offset dip port /CD 760mm square cover with central dip port /CD/D400* 760mm square cover with central dip port Single Fill Port Covers Our new range of fill port covers are designed with only one hole, for access to one fill riser. The port is located in a central or offset position and the port cover can be colour coded to identify the fuel grade. The port cover can be attached with a chain to prevent incorrect fuel drops into the tank. Additional product ID plates can be fixed to the main cover. Hole position varies on each size of cover. Standard covers are designed to meet and exceed the (25 ton) load rating. FL90/CF 900mm dia. cover with centre fill port FL90/OF 900mm dia. cover with offset fill port FL90/CF/D400* 900mm dia. cover with centre fill port FL90/OF/D400* 900mm dia. cover with offset fill port FL100/CF 1020mm dia. cover with centre fill port FL100/OF 1020mm dia. cover the offset fill port
4 FL10 Raised Covers The original raised cover is designed with a simple water check in the frame, to keep rainwater out of the installation. This cover is not sealed, so excess surface water can drain into the ground between the skirt and sump. Still an award winning design, this cover range offers a cost effective solution for all sump access installations. Locks available. FL10, FL36 & FL42 are designed to cover tank sumps. Small covers can be used for a range of applications. Covers are designed to meet and exceed the (25 ton) load rating. FL36 FL42 FL36 FL mm dia. raintight raised cover & aluminium frame 900mm dia. raintight raised cover & aluminium frame 300mm dia. raintight raised cover & aluminium frame FL10 FL1 FL3 FL x 766mm raintight raised cover & aluminium frame 600 x 600mm raintight raised cover & aluminium frame 600 x 766mm raintight raised cover & aluminium frame 450 x 450mm raintight raised cover & aluminium frame Lifting Handles FL7 FL7A FL7A/ENCL FL7 To easily & safely remove & replace raised covers and flat covers with no seal FL7A With foot lever designed to break the seal on watertight flat sealed covers. It can be used to remove all types of Fibrelite covers FL7A/ENCL 910 x 362mm lockable cabinet to house 2 FL7A lifting handles (handles not included) Replacement Cover Seal Kits Model Model FL100/SRK FL100 cover seal kit FL140/SRK FL140 frame seal kit FL90/SRK FL90 cover seal kit FL96/SRK FL96 frame seal kit 0/SRK 0 cover seal kit FL900/SRK FL900 frame seal kit FL600/SRK FL600 cover seal kit /SRK frame seal kit FL180/SRK FL180 cover seal kit FL60/SRK FL60 frame seal kit FL120/SRK FL120 cover seal kit FL450/SRK FL450 frame seal kit FC254/SEAL FC254 dip/fill cover seal kit
5 GRP Skirts GRP skirts are manufactured using high technology RTM production methods, to create a one piece moulded, smooth finish skirt. Skirts are supplied with a bonding sealant to create a watertight seal with the frame. The strong non-corrosive structure provides an excellent surface to support concrete. To fit square and rectangular covers Model FL140/SK300 FL96/SK300 FL900/SK300 FL10/76/SK300 FL60/SK250 FL450/SK mm deep skirt to fit FL mm deep skirt to fit FL96 275mm deep skirt to fit FL mm deep straight skirt to fit FL10 & deep straight skirt to fit FL60 300mm deep straight skirt to fit FL450 To fit round covers Model Flared Skirts FL42/SK mm deep skirt to fit FL42 FL100/SK250 deep skirt to fit FL100 FL90/SK mm deep skirt to fit FL90 FL36/SK mm deep skirt to fit FL36 FL36/SK mm deep skirt to fit FL36 0/SK mm deep skirt to fit 0 Straight Skirts FL100/SK mm deep skirt to fit FL100 FL36/90/SK mm deep skirt to fit both FL36 and FL90 FL90/SK mm deep skirt to fit FL90 FL600/SK mm deep skirt to fit FL600 FL180/SK mm deep skirt to fit FL180 FL120/SK mm deep skirt to fit FL120 FL12/SK mm deep skirt to fit FL12 Cover/Frame Locks FIB/L FIB/RL FIB45/L FIB76/L FIB90/L Lock to fit FL1, FL3, FL10 covers Lock to fit FL12, FL36, FL42 covers Lock to fit FL45 cover Lock to fit FL450, FL60,, FL900, FL96 & FL140 covers For FL140 two locks are required. Lock to fit FL120, FL180, FL600, 0, FL90 & FL100 covers Safety Platforms Metal grid safety platform complete with fixing brackets to fit a frame. Model Model FL6AN fits FL1 frame FL6EN fits FL60 frame FL6BN fits FL3 frame FL6FN fits FL36 frame FL6CN fits FL10 frame FL6GN fits FL140 frame FL6DN fits frame FL6HN fits FL42 frame The Fibrelite global client list who will only use Fibrelite continues to grow. They recognise that Fibrelite is the best long term investment at a competitive price. Our covers offer tremendous advantages of innovative design and high quality over other wanabee composite and steel products. Manufacturing conforms with ISO 9001:2008 standards. All covers are designed to a minimum criteria of EN 124- standard.
6 KM Fibrelite s commitment towards maintaining the highest possible standards Fibrelite s & FL90 covers have been accredited with the BSI kitemark. This is your assurance that samples are regularly subjected to rigorous, independent testing to ensure that they comply with stringent standards for safety, product performance, or reliability. In addition, the Kitemark also means that the quality systems of the factory where this Fibrelite cover was made are systematically assessed. The Kitemark is therefore Fibrelite s commitment towards maintaining the highest possible standards. Distributor Contact Details UK Office: Snaygill Industrial Estate, Keighley Road, Skipton, North Yorkshire, BD23 2QR, UK Tel: +44 (0) , Fax: +44 (0) , covers@fibrelite.com, Website: US Office: 3250 US Highway 70 Business West, Smithfield, NC 27577, USA Tel: Fax: covers@fibrelite.com vers 12/10
Lightweight, Heavy Duty
Lightweight, Heavy Duty Trench Covers System Reliability The light weight combined with the tremendous strength of Comcore Trench Covers translates into speed, productivity and increased system reliability.
Grade Level Spill Containment Manholes
Grade Level Spill Containment Manholes Installation Instructions 705-5 Gallon 715-15 Gallon 725-25 Gallon Manual # Revision Date Changes from Previous Revision F-1307 7 Mar. 2012 Removed reference to pipe
Multiport Spill Containment with Defender Spill Containers
Multiport Spill Containment with Defender Spill Containers Retrofit Installation Guide Overview Franklin Fueling Systems 3760 Marsh Rd. Madison, WI 53718 USA Tel: +1 608 838 8786 800 225 9787 Fax: +1 608
FAIRFIELD INDUSTRIES INC.
FAIRFIELD INDUSTRIES INC. v NEW PRICE SCHEDULE 4/1/201 SUPERSEDES 4/1/11 SPILL CONTAINMENT And STREET ACCESS MANHOLES for UNDERGROUND And ABOVEGROUND TANKS SPILL CONTAINMENT MANHOLES MONITOR WELL SERIES
FAIRFIELD INDUSTRIES INC.
FAIRFIELD INDUSTRIES INC. v NEW SCHEDULE 4/1/2011 SUPERSEDES 6/9/08 SPILL CONTAINMENT and STREET ACCESS MANHOLES for UNDERGROUND and ABOVEGROUND TANKS SPILL CONTAINMENT MANHOLES HEAVY DUTY STREET MANHOLES
Integrated Manhole Ladder System
Application: This innovative product has been designed to provide safe access and egress to precast concrete manholes and inspection chambers. It can also be used within any other underground concrete
Below Grade Spill Containment Manholes 705-5 Gallon 715-15 Gallon 725-25 Gallon. Installation Instructions
Below Grade Spill Containment Manholes 705-5 Gallon 715-15 Gallon 725-25 Gallon Installation Instructions Warning Application and use of this product should be in compliance with local, state, and federal
Fabricated Drainage Products
Fabricated Drainage Products Complete Drainage System Inline Drains are used At the beginning of a drain line Add a new water inlet to an existing drain line using a riser pipe and tee HARCO Surface Drainage
OPW 400 and 500 Series Multi-Port Spill Containment Manholes. Model Descriptions. Features. Listings and Certifications
FSA400 Model s u OPW 411 Series features a flushmounted manhole lid and raised dual dam and groove spill container rings, with P2105 Buckets using OPW 1-2105 Style Slip-On 5-gallon containers. Base is
(52) In6 Publication CCM2 May 2000 ADVANCED DRAINAGE SYSTEM CATCHPITS, CHAMBERS & MANHOLES RIDGIDRAIN ENGINEERING EXCELLENCE
(52) In6 Publication CCM2 May 2000 ENGINEERING EXCELLENCE RIDGIDRAIN ADVANCED DRAINAGE SYSTEM CATCHPITS, CHAMBERS & MANHOLES AN INTRODUCTION TO POLYPIPE CIVILS LTD AN UNRIVALLED RANGE OF CATCHPITS MANHOLES
EUROPLAST S.P.A. 31025 S. LUCIA DI PIAVE - Via Gorizia, 7 - (Tv) - Italy. Tel. +39 0438.4697 - Fax +39 0438.460766. www.europlast.
EUROPLAST S.P.A. 31025 S. LUCIA DI PIAVE - Via Gorizia, 7 - (Tv) - Italy Tel. +39 0438.4697 - Fax +39 0438.460766 www.europlast.it e-mail: europlast@europlast.it 09/05 drainage system EXPORT COMPANY PROFILE
SEPTIC TANKS FOR THE COLLECTION & SETTLEMENT OF DOMESTIC SEWAGE
SEPTIC TANKS FOR THE COLLECTION & SETTLEMENT OF DOMESTIC SEWAGE Let us help! Free professional site visit with friendly support and advice. helpingyou@klargester.com to make the right decision or call
Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal)
Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal) IMPORTANT: It is imperative that the user read these warnings and use of the assembly instructions
The BASA Guide to the ISO 11600 Classification of Sealants for Building Construction
The BASA Guide to the ISO 11600 Classification of Sealants for Building Construction SEALANTS IN BUILDING AND CONSTRUCTION Glazing Sealants (G) Construction Sealants (F) Class 25 Class 25LM Class 25 Class
DISTRIBUTION SERVICES DISTRIBUTION SERVICES. distribution services. marine solutions. distribution services
DISTRIBUTION SERVICES DISTRIBUTION SERVICES distribution services distribution services marine solutions What do we do? Nemesis GB Ltd is the exclusive distributor of Brodit Marine in the UK, stocking
Colonnade Security Pipe
Description: Round & Square downpipe formed from extruded 6060 T4 aluminium in various sizes (Ø83mm, Ø108mm, 83x83 mm & 108x108mm*) & supplied with a complete range of accessories i.e. Offsets, bends,
Spill Containment Manholes
Spill Containment Manholes 1-2100 Series OPW and Pomeco Spill Containment Manholes are designed to prevent spilled product from entering the soil near the fill and vapor return riser connections on underground
Spill Containment. Contents
Contents IBC Bund, Spill Pallet or Sump Pallets 3-9 IBC Spill Containment Bund - User Healthy & Safety Instructions Spill Trays, Drum Bunds & Drum Pallets 11-18 Tank Bunds 19-21 Standard Sized Bunds 22
Grilles & Diffusers Series LFP Incorporating
Grilles & Diffusers Incorporating Series LFP Produce a stable linear throw, creating an area of clean air with minimal diffusion Perfect for areas like clean rooms and operating theatres Tile replacer
PRODUCT GUIDE. Designed and manufactured using patented. ThruBeam
PRODUCT GUIDE Designed and manufactured using patented ThruBeam T E C H N O L O G Y Introduction to MwayPro Composite Covers The inherent properties of composite materials are ideal for the manhole environment.
Replaceable Spill Containment
Replaceable Spill Containment Never Break Concrete Again EMCO WHEATON RETAIL CORPORATION 2300 Industrial Park Drive Wilson, North Carolina 27893 252-243-0150 252-243-4603 (fax) www.emcoretail.com Selection
Material Comparison Lower Quality Blender Optimum 9400. Electric Motor Assembly. Plastic Fans Low cost
Below is a factual comparison between our Optimum 9400 model and a lower quality high-speed blender dated May 20 th 2014. This comparison has been independently conducted, reviewing the key components
TS 813 GROUNDING AND BONDING TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET GROUNDING
TORONTO TRANSPORTATION January 2012 TS 813 GROUNDING AND BONDING TABLE OF CONTENTS 1. DRAWINGS TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET
Fire Resistant Systems
Fire Resistant Systems A R C H I T E C T U R A L A L U M I N I U M G L A Z I N G S Y S T E M S Fire Resistant Systems Introduction Kawneer are pleased to introduce two new comprehensive Fire Resistant
ACO Water Management: Civils + Infrastructure
ACO Water Management: Civils + Infrastructure Technical data Introduction to The unit provides an aesthetically pleasing solution when linking proprietary conveyance drainage systems to vegetated infiltration
Mechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
ANYTHING ELSE IS A COMPROMISE
ANYTHING ELSE IS A COMPROMISE THE REVOLUTION BEGAN IN 1993. That s when Iron Grip transformed the fitness industry with an unwavering commitment to groundbreaking design and state-of-the-art production
September 1, 2003 CONCRETE MANUAL 5-694.900 CONCRETE PAVEMENT REHABILITATION 5-694.900
September 1, 2003 CONCRETE MANUAL 5-694.900 5-694.901 GENERAL CONCRETE PAVEMENT REHABILITATION 5-694.900 Concrete Pavement Rehabilitation is an extremely valuable tool of the Minnesota Department of Transportation
Spill Containment. Contents
Contents IBC Bund, Spill Pallet or Sump Pallets 2-14 IBC Bunds - User Healthy & Safety Instructions 15-16 Spill Trays, Drum Bunds & Drum Pallets 17-25 Tank Bunds 26-28 Standard Sized Bunds 29 Custom Built
SECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
ATLAS RESISTANCE Pier Foundation Systems
ATLAS RESISTANCE Pier Foundation Systems Foundation Repair Systems for Civil Construction Applications: Residential, Commercial, Industrial Atlas Resistance Piers have been used to restore and/or stabilize
The most advanced Undersink Sullage System with inbuilt controls and alarms.
Optional Interlock Panel The most advanced Undersink Sullage System with inbuilt controls and alarms. The Aquatec Sinktec Sullage System is used to handle sink and basin waste in circumstances where gravity
Shower and Floor Gullies Channel Drain and Tile Drain SECTION
Shower and Floor Gullies Channel Drain and Tile Drain SECTION 2 Shower and Floor Gullies, Channel Drain and Tile Drain 29 General Information Shower and Floor Gullies McAlpine has responded to market conditions
Section 5.0. Basements. Wall insulated externally. Wall insulated internally. Ba02. Product: Polyfoam ECO Floorboard Ba01.
Section 5.0 Basements Wall insulated externally Product: Polyfoam ECO Ba01 Wall insulated internally Product: Polyfoam ECO Ba02 Basements Basements Basement design Waterproofing BS 8102: 2009 Code of practice
Conservatory roof system designed without compromise - tested to the highest standards
Conservatory roof system designed without compromise - tested to the highest standards The UK s number 1 conservatory roof info@synseal.com www.synseal.com Your success with Looking for a conservatory
Solar Mounting Catalogue
Solar Mounting Catalogue Tile roof, metal sheet roof, flat roof, whatever type of your roof is, we can supply you all rooftop mounting solutions. With high quality of anodized aluminium and galvanized
M E TA L C O N TA I N E R S 90
90 INDUSTRIAL CONTAINERS COLOUR VARIANTS For high capacity can be stacked up to 4 pieces (1+3). Made of moulded reinforced steel or electro-welded mesh 40 x 40 x 4mm. with wire welding in all the points
INTERIOR WALLS AND BASEMENTS CHOOSING THE RIGHT MEMBRANE FOR INTERIOR WALLS. Multi-Layer Technology provides increased strength.
INTERIOR WALLS AND BASEMENTS CHOOSING THE RIGHT MEMBRANE FOR INTERIOR WALLS Multi-Layer Technology provides increased strength. Specifically designed for interior applications. Compatible with most internal
Plaisance 24. Sliding Systems. Sapa Building System
Plaisance 24 Sliding Systems Sapa Building System Plaisance 24 is Sapa s noninsulated sliding system for windows and doors. Available as one-, two-, three- and fourrail solution. Among its features, there
Photographs: Acceptable, Unacceptable, and Unacceptably Repaired Precast Concrete Products
Photographs: Acceptable, Unacceptable, and Unacceptably Repaired Precast Concrete Products A Visual Aid For: Bureau of Materials and Physical Research s (BMPR) Policy Memorandum, Quality Control/Quality
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
Composite Panel Firewall Systems
Composite Panel Firewall Systems part of the Protecting more than your business Insulated mineral fibre panels have excellent thermal and acoustic properties, ideal for factory and office partition walls.
Givare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
CHAPTER 11 STORM DRAINAGE
CHAPTER 11 STORM DRAINAGE SECTION 11 GENERAL 11.1 Scope. The provisions of this chapter shall govern the materials, design, construction and installation of storm drainage. 11.2 Where required. All roofs,
DIVISION 2 - SEWERAGE AND DRAINAGE SECTION 02720 - STORM DRAIN SYSTEMS PART 1 - GENERAL
DIVISION 2 - SEWERAGE AND DRAINAGE SECTION 02720 - STORM DRAIN SYSTEMS PART 1 - GENERAL 1.01 DESCRIPTION A. Furnish and install all storm drains, including manholes, inlets, service lines and other appurtenant
INSTRUCTIONS: LocknCharge Laptop Carts
INSTRUCTIONS: LocknCharge Laptop Carts www.lockncharge.com Extra Tools required: Hammer, Philips head screwdriver, medium adjustable spanner. (Allen key supplied) (Panel colours for illustration purposes
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE
TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION PART 8000 - PRECAST CONCRETE TABLE OF CONTENTS Item Number Page 8100 PRECAST CONCRETE CONSTRUCTION - GENERAL 8-3 8101 General
Maryland Containment System Testing Protocol. The individual performing the inspection and testing as outlined in this protocol must be either:
MARYLAND DEPARTMENT OF THE ENVIRONMENT Oil Control Program, Suite 620, 1800 Washington Blvd., Baltimore MD 21230-1719 4 410-537-3442 410-537-3092 (fax) 1-800-633-6101 http://www.mde.state.md.us Maryland
The Guide To Waterproofing An Existing Basement
The Guide To Waterproofing An Existing Basement John Newton & Company is the leading independent supplier of basement waterproofing and damp proofing solutions in the UK. Newton System 500 is a maintainable
Stair Towers Public Stair Towers Universal System Scaffold Loading Towers 750 Temporary Roofs and Containment
U K S Y S T E M S C A F F O L D Stair Towers Public Stair Towers Universal System Scaffold Loading Towers 750 Temporary Roofs and Containment Why you should use UK System Scaffold Hire UK SYSTEM SCAFFOLD
Cable ladder installation at S.C.M. Chemicals Limited s titanium dioxide Plant in Western Australia
Exel Composites Cable Support Systems offer engineers a structural product for solving many design and plant engineering problems, enabling long term reliable support of expensive and often critical cables.
Rooflight INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Rooflight These instructions should be used for: Installing Permanent Trickle Ventilation: Constructing & Waterproofing a Timber Upstand Curb: Installing & Waterproofing Proprietary
HYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
CONTENTS. Page KERBS ETHEKWINI PRODUCTS ETHEKWINI PRODUCTS WATER CHANNELS WATER CHANNELS / GRILL BLOCKS / CHANNEL DRAIN COVERS
CONTENTS KERBS ETHEKWINI PRODUCTS ETHEKWINI PRODUCTS WATER CHANNELS WATER CHANNELS / GRILL BLOCKS / CHANNEL DRAIN COVERS STADIUM SEATING / ETHEKWINI & TELKOM SPEC PRODUCTS PRECAST PANELS DURBAN BEACHFRONT
IMPORTANT INFORMATION
Curved Quadrant Instruction Manual CQ IMPORTANT INFORMATION Toughened glass is completely safe for use in our shower enclosures and bath screens; providing our products are installed according to our guidelines.
GK Packing System Welding Instructions
GK Packing System Welding Instructions Roxtec GmbH Neuer Höltigbaum 1-3, 22143 Hamburg GERMANY Tel +49 (040) 657398-0, Fax +49 (040) 657398-50 EMAIL info@de.roxtec.com, www.roxtec.de Welding instructions
British Standard Underground Hydrant Range
British Standard Underground Hydrant Range 2 THE NEW AVK BRITISH STANDARD HYDRANT RANGE AVK are the renowned market leading innovators, manufacturers and suppliers of BS 750 fire hydrants into the UK,
How to build a Pizza Oven in 4 days
How to build a Pizza Oven in 4 days Preparation day (slab) 1. Foundation 1500 deep x 1300 wide x 75mm deep Required 20 bags cement pre mix. If you already have a concrete base, you save this prep day DAY
The Plastic Injection Moulders. Furniture Fittings & Tube Inserts
The Plastic Injection Moulders Furniture Fittings & Tube Inserts Contents Introduction Page 1 Square Inserts Page 2-3 Round Inserts Page 4-5 Rectangular Inserts Page 6-7 Domed and Shaped Inserts Page 8-9
SECTION 4: Cable Ladder Stainless Steel & Aluminium
SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
An overview of mechanical lock and security related standards and why they re important to the Insurance Industry
An overview of mechanical lock and security related standards and why they re important to the Insurance Industry In order to minimise risk it s essential for Insurers to be able to recommend the fitting
Idealite. Strong and light low profile shower trays. www.idealstandard.co.uk
Ideal Standard The Bathroom Works National Avenue Kingston Upon Hull HU5 4HS T 01482 346461 F 01482 445886 www.idealstandard.co.uk Ideal Standard M50 Business Park Ballymount Dublin 12 T 00353 1 4564525
Confort 26. Sliding Systems. Sapa Building System
Confort 26 Sliding Systems Sapa Building System Confort 26 is Sapa s thermally insulated sliding system for windows and doors. Available as two- and three-rail solution. Among its features, there are
Upstand Rooflight Natural Light Translucent Upstand Systems
Insulated Panels CI/SfB (4-) Rh2 October 2008 ROOFLIGHT SYSTEM Upstand Rooflight Natural Light Translucent Upstand Systems Upstand Rooflight Pre-assembled Rooflight System Introduction The Upstand Rooflight
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
SEPTIC SYSTEM CONSTRUCTION REQUIREMENTS ST. MARY S COUNTY HEALTH DEPARTMENT
SEPTIC SYSTEM CONSTRUCTION REQUIREMENTS ST. MARY S COUNTY HEALTH DEPARTMENT The following are minimum requirements for installation of conventional trench sewage disposal systems in St. Mary s County,
6mm Two Door Offset Quadrant
Installation Guide 6mm Two Door Offset Quadrant 226MBJ 0914RN Offset Quadrant 226MBJ.indd 1 07/08/2015 14:03 Cu w Before you Start Please read this Installation Guide fully. Although these instructions
The Ultimate in Boating Pedestals Seating and Table Systems. Stainless steel Range. www.marinetechindustries.com.au
The Ultimate in Boating Pedestals Seating and Table Systems Stainless steel Range STABILITY, DURABILITY, STYLE & COMFORT A proudly Australian owned business, Marine Tech Industries Australia Pty Ltd designs,
Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
TRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
Cardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com
CARDOK CARLIFT Fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built to measure, all dimensions can
!!!!!! !!! Decra Plus DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 DPSW016 DPSW020 DPSW021 DPSW024 DPSW030 DPSW031 DPSW035 DPSW030 DPSW031 DPSW035
Decra Plus Drawing no DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 Description Shown In Decra Brochure Most Commonly Used Detail t~êã=oççñ=b~îéë=aéí~áä=b~îéë=lîéêü~åö=táíü=fåëìä~íéç=c~ëåá~=~åç=pçññáí
FRACASSO SCAFFOLDING PS 720
FRACASSO SCAFFOLDING PS 720 Characteristics Geometry Strengths PS 720 was designed and constructed in keeping with European regulations EN12810 and EN12811. 150 mm pin obtained by tapering the upright
Timber Decks. Technical Note. March 2007
Timber Decks Technical Note. March 2007 This Technical Note contains general information for residential timber decks and floor frame structures for veranda s, patios etc which are exposed to the weather.
Glass Fibers Reinforced Composits (GFRP) for TUNNELLING
Glass Fibers Reinforced Composits (GFRP) for TUNNELLING Introduction The main utilization of GFRP Composites is extended to the entire field of temporary consolidation. The success of this application,
Sarasota Splash Back Prep and Shine Paint Restorer Inside Front Cover
Caution: Read entire label before using product. Do-It-Yourself PAINT RESTORER KIT Kit Contains: 1-16 oz. Water-based, Biodegradeable Liquid Prep 1-16 oz. Aerosol Shine Spray 1 - Spray Nozzle 2 - Scrub
Spill Containment Device and Containment Sump Testing Protocols. Introduction
Department of Natural Resources and Environmental Control Tank Management Branch 391 Lukens Drive New Castle, DE 19720 (302) 395-2500 (Phone) (302) 395-2555 (Fax) http://www.dnrec.state.de.us/dnrec2000/divisions/awm/ust
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers Universal container K 470 the original since 1950 Often copied but never equalled or bettered
Linear Motion & Assembly Technologies - Guarding System
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Linear Motion & Assembly Technologies - Guarding System EcoSafe Guarding System from Rexroth Guarding
MVX-Series Diesel Engine Air Shut Down Valves
MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303
SERIES NG 1800 STRUCTURAL STEELWORK
MANUAL OF CONTRACT DOCUMENTS FOR HIGHWAY WORKS VOLUME 2 NOTES FOR GUIDANCE ON THE SPECIFICATION FOR HIGHWAY WORKS SERIES NG 1800 STRUCTURAL STEELWORK Contents Clause Title Page NG 1800 (08/14) General
Information Technology Solutions. Feeder Pillars
Feeder Pillars D ES IG NE R A ND M ANUFA C TU RE R Lighting Design Solutions are designers and manufacturers of a wide range of specialist street lighting furniture along with structural and architectural
September 2007. September 2013. Consulting Structural and Civil Engineers. 100 St John Street London EC1M 4EH. info @ akt-uk.com www.akt-uk.
Consulting Structural and Civil Engineers 100 St John Street London EC1M 4EH T +44 (0) 20 7250 7777 F +44 (0) 20 7250 7555 info @ akt-uk.com www.akt-uk.com 3290 A031234 The 196-222 Joseph Kings Bloggs
GUARDRAIL INNOVATION FLOWS FROM HERE
INNOVATION FLOWS FROM HERE ENSURING SAFETY ON CANADIAN HIGHWAYS The economics, versatility, and performance of Guardrail surpass all other roadside barrier systems. Guardrail provides highly-visible protection
RADAR. 227 www.ncdirect.co.uk
RADAR solutions RADAR RADAR Key System 228 RADAR Lockset 229 RADAR Cover Plate 229 RADAR Padlock 230 RADAR Automatic Toilet Entry System 231 RADAR Ramp 231 RADAR Ramp Sign 231 227 www.ncdirect.co.uk RADAR
CARGO SEALING GUIDE - PROCEDURES FOR C-TPAT/FAST PARTICIPANTS
CARGO SEALING GUIDE - PROCEDURES FOR C-TPAT/FAST PARTICIPANTS 1. Scope This document establishes the recommended procedures for affixing high security mechanical seals to cargo loaded trailers for Customs-Trade
CONCRETE REPAIR GUIDELINES. Concrete repairs can be broken down into four basic types, plus special repairs and planing.
CONCRETE REPAIR GUIDELINES Concrete repairs can be broken down into four basic types, plus special repairs and planing. Note: It is recommended that investigation into soundness of pavement be performed
NAYLOR. Metro Duct. The Complete Duct and Access System M E T R O D R A I N. The MANUFACTURING EXCELLENCE Awards Winner - Best SME
NAYLOR M E T R O D R A I N Metro Duct The Complete Duct and Access System e m a i l : s a l e s @ n a y l o r. c o. u k w e b : w w w. n a y l o r. c o. u k Winners Growing Business The MANUFACTURING EXCELLENCE
WATERPROOFING OF WET ROOMS
WATERPROOFING OF WET ROOMS Waterproofing under tiles For longterm enjoyment of a wetroom area a complete and resistant waterproofing system is an important precondition. Most tiles are by themselves waterproof
DIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
A Solid Foundation Solution for Homeowners. from. Our products are made with 90% Recycled Material Down. Right. Solid. GREEN.
A Solid Foundation Solution for Homeowners from Our products are made with 90% Recycled Material Down. Right. Solid. GREEN. Stop the damaging effects of foundation settling... Sinking foundations, cracked
GRC Porticos. Lightweight entrance porticos ABBEY ARTSTONE
GRC Porticos Lightweight entrance porticos ABBEY ARTSTONE GRC Porticos Lightweight entrance porticos Abbey Artstone's range of lightweight products designed for the construction industry is the only range
Fixed Vertical Access Ladders
Fixed Vertical Access Ladders Index 1. Fixed Vertical Access Ladders 2. Aluminium Fixed Vertical Access Ladders: Standard Specification 3. Aluminium Fixed Vertical Access Ladders: Technical Drawing 4.
Plaisance 50. Windows and doors. Sapa Building System
Plaisance 50 Windows and doors Sapa Building System Plaisance 50 is a non-thermally broken system for aluminium windows and doors with a building depth. The system offers a wide range of inward and outward
2015 PRICE L IST INNOVATION THROUGH ENGINEERING 1-8 0 0-2 2 3-0 0 1 2 1-6 1 3-5 4 6-6 6 8 3 S A L E S @ A N C H O R C O N C R E T E.
2015 L IST INNOVATION THROUGH ENGINEERING 1-8 0 0-2 2 3-0 0 1 2 1-6 1 3-5 4 6-6 6 8 3 S A L E S @ A N C H O R C O N C R E T E. C O M 1 6 4 5 SYDENHAM ROAD KINGSTON ONTARIO C ANADA K7L4V4 WWW.ANCHORCONCRETE.COM
Surface Water Drainage Products
Surface Water Drainage Products Surface Water Drainage Products Reln Rain Drain 1m Lengths (Internal dimensions 100mm x 100mm) 118mm 100mm 100mm 128mm 1m 001134 001133 001200 001188 001195 001190 001143
THE VOID LETTABLE STANDARD
THE VOID LETTABLE STANDARD North West Leicestershire District Council is responsible for allocating empty Council owned homes. The Lettable standard has been agreed in consultation with the tenants of
Midwest Industrial Tanks
FOR AGRICULTURE AND INDUSTRY Midwest Industrial Tanks Fuel & Oil Storage Solutions Midwest Industrial Tanks Is Your Source For All Of Your Fuel Storage And Fuel Transportation Needs. Our Satisfied Customers