VAS 6150 Diagnostic-Laptop

Transcription

1 VAS 6150 Diagnostic-Laptop Startup/unpacking instructions V 1.00 System supplier: Volkswagen Aktiengesellschaft SPX EUROPE GMBH Konzern-Service SPX Service Solutions Europe Werkstattausrüstung Porschestrasse 4 D Wolfsburg Hainburg

2 Please read carefully! Changes to the shape, configuration and technology of the items delivered are possible. No claims may therefore be derived from the data, figures and descriptions in this instruction manual. Reproduction, duplication or translation, even in parts, without the written permission of the Volkswagen group/manufacturer is permitted only for the purpose of making one copy of the user documentation available for each device. Transferring to third-parties is not permitted. The Volkswagen group and the manufacturer expressly reserve all legal rights as regards authorship.

3 Contents Safety instructions Important information Unpacking instructions Scope of delivery Installing the batteries Power supply Startup Interface connections Turning on Switching off Windows XP license agreement Diagnostic radio head VAS 5054A Diagnostic interface VAS Further information Troubleshooting Startup /unpacking instructions VAS 6150 V

4 Signs and symbols Safety instructions The meaning of the symbols used In the safety instructions of the instruction manuals, the startup/unpacking instructions or other documentation provided, in the screen displays on the tester (within VASPC) during the operation and on the products is given below: Warning! Texts with this symbol contain information concerning your safety and how you can reduce the risk of severe and fatal injuries. The WARNING symbol calls for particular attention as regards your safety. Caution! Texts with this symbol contain information regarding how you can avoid damage to the vehicle and to the device. The caution symbol informs that non-compliance with the information can lead to damage to the vehicle and/or tester (e.g.: Ensure that the touch-screen display is not touched with sharp, angular objects.). Tip Texts with this symbol contain additional, useful information. A Tip symbol matters. points out important information regarding the product, its operation and other relevant Reference to further safety instructions General safety instructions applicable to the VAS 505x and VAS 6150 tester family on the whole are listed below. Further safety instructions are given in the instruction manuals. Therefore, read the instruction manuals before the use. Safety instructions can also be displayed on the display of the tester. Observe all the instructions displayed Startup /unpacking instructions VAS 6150 V 1.00

5 IMPORTANT SAFETY INSTRUCTIONS 1. Warning! Read all the instructions. 2. Warning! If the mains cable or the device is damaged, it must not be used until a qualified specialist has checked it. 3. Warning! Do not let cables or lines hang over the edges of tables, benches or desks. Do not let the cables or lines come in contact with hot parts or running fans. 4. Warning! Use of an extension cord is not permitted. Only the specified cables may be used for testing purposes. 5. Warning! The device must always be isolated from the mains when not in use. Never pull the mains cable out of the socket using the cable. Grip the plug housing to pull it from the mains supply. 6. Warning! The tester must not be operated in close proximity of open fuel tanks, since otherwise there could be risk of fire or explosion. 7. Warning! If you are working on IC machines, you must take care that there is sufficient ventilation. Otherwise there could be the risk of intoxication. Startup /unpacking instructions VAS 6150 V

6 8. Warning! Use the device exclusively in accordance with the description. Use only the accessories recommended by the manufacturer. 9. Warning! Risk of explosions The devices have internal parts that can generate sparks and must not therefore be exposed to inflammable vapors. The device should be operated at least 460 mm (18 inch) above the ground surface since petrol and other possible vapors settle on the ground. 10. Warning! Devices under mains voltage correspond to safety class 1 and are equipped with a mains cable checked for safety. They may be connected to the mains with earthed equipment grounding conductor (TN networks) only or mains sockets with earthed equipment grounding conductor. 11. Warning! During the test runs, fasten the diagnostic laptop securely to the rear seat of the vehicle. A second person must operate the diagnostic laptop on the rear seat. Operating on the front seat or without secure fastening is not permitted for safety purposes (e.g. deployment of the airbags). 12. Caution! Fluctuations and deviations of the mains voltage beyond the admissible tolerance can lead to malfunctioning and damage Startup /unpacking instructions VAS 6150 V 1.00

7 13. Warning! Electrical ignition systems have voltages up to about 30 kv. It is mandatory to observe the general safety guidelines for workshops. 14. Warning! Unauthorised opening of the tester including accessories or tampering may cause substantial hazards for the person doing it and the device. 15. Warning! If the mains cable, a diagnostic or test lead, the tester or any other accessory under voltage is damaged, it must not be used until a qualified specialist has given a clearance. 16. Warning! If you are not going to use the device for a long time, please switch if off using the on/off button and isolate it from the mains, if the battery is charged. Just switching off is not sufficient to isolate the power supply, charging circuit and any connected accessories from the mains. 17. Warning! During a thunderstorm data transmission lines must not be connected or removed and the device must not be operated. 18. Caution! Workshop vehicle - ventilation When operating the VAS 6150 in a workshop vehicle, take care that the table power supply for the tester and printer has sufficient ventilation. Remember that even when the tester is switched off, the battery is getting charged and the printer is on-line. This is true even for the energy saving mode. Startup /unpacking instructions VAS 6150 V

8 19. Caution! When connecting other vehicles The VAS 505x and VAS 6150 diagnostic devices were developed or qualified for vehicles of the Volkswagen group. Directly connecting the tester or diagnostic radio head /interface to vehicles of other manufacturers can therefore cause damage to the vehicle. For possible testing of other vehicles using the generally applicable OBD functions in the self-diagnosis, the VAS 5052/16 OBD adapter cable must, therefore, be connected between the diagnostic cable and diagnostic interface of the vehicle (with fewer line connections). 20. Caution! While handling the battery Only trained personnel may change the batteries. Never short circuit the battery. Never throw the battery into fire. Dispose of/recycle the battery only in empty condition in accordance with the local regulations. Safety instructions for radio-operated devices 21. Warning! No changes must be done to the antenna of devices with radio license, e.g. repositioning or use of other antennas or transmitters. 22. Warning! Do not use any portable radio transmitter in the vicinity of unshielded detonators or in an explosive environment (e.g. a device for wireless networks (WLAN) or Bluetooth), unless the device were adapted in such a way that it is suitable for such a purpose. 23. Warning! You can read the notes regarding the Bluetooth and W-LAN country registrations in the VAS 6150 operating instructions or the VAS 5054A/VAS5055 device manual PRESERVE THESE INSTRUCTIONS! Issue date: July Startup /unpacking instructions VAS 6150 V 1.00

9 1 Important information Dear Customer, When unpacking / starting up your VAS 6150, check the following points: Damages in transit / incomplete delivery Damaged packaging Have the damage acknowledged by the deliverer in writing on the delivery note and report immediately. Packaging intact, but contents damaged Report the damage immediately in writing Delivery Incomplete Please check in accordance with the scope of delivery (chapter 3) whether your system was delivered completely. Please report incompleteness immediately in writing. Further course of action in the case of transit damages or incomplete delivery is described in chapter 7, Troubleshooting. Temperature equalization In the case of delivery of the VAS 6150 during the winter time condensation inside the device must be prevented. For this reason, please let the device rest at the place of operation for about 3 hours before connecting/switching it on for the temperature to equalize! Safety and startup instructions Please read the safety and startup instructions carefully before the startup. Warranty and registration It is mandatory to resister your device with the system supplier SPX Europe GmbH. The warranty (24 months except for the wear and tear parts such as batteries) is assured only on the basis of the registration. For this purpose, please preserve your delivery note as a proof. The services agreed upon with Volkswagens AG can only be guaranteed, if you are registered. For registration, please fill the registration card. They can send the registration card by or fax. You will find the addresses on the registration card. Thank you for your cooperation in advance. Your VAS 6150 service team Startup /unpacking instructions VAS 6150 V

10 2 Unpacking instructions The VAS 6150 and all its accessories are delivered in a cardboard box with another cardboard box inside. The tester with accessories and the docking station (port replicator) are packed separately in the inside cardboard box. Unpack all parts; remove the protective plastic film from the VAS 6150 and the docking station (port replicator). Dispose of the packing material in accordance with the local regulations. Check the contents with the scope of delivery (chapter 3). 3 Scope of delivery The delivery of the VAS 6150 consists of a cardboard box with the following contents: Startup /unpacking instructions VAS 6150 V 1.00

11 1. VAS Docking station for VAS Power supply for VAS Country specific mains cable 5. Battery pack for VAS 6150 (without figure) 6. Diagnostic radio head VAS 5054A alternatively diagnostic interface VAS 5055 without radio communication with permanently connected USB cable 7. USB cable for VAS 5054A 8. CDs for Windows XP and Windows Vista (not required for the operation of VAS 6150) 9. Documentation in paper form (operating manual for Panasonic CF-52, startup and unpacking instructions, documentation links and recovery instructions and operating manual for port replicator) 4 Installing the batteries Insert the provided battery pack, if supplied separately, into the tester. Caution! Only trained personnel may change the batteries. Never short circuit the battery. Never throw the battery into fire. Dispose of/recycle the battery only in empty condition, in accordance with the local regulations. Reverse the VAS 6150 (see figure), press and hold the "Push mark. Slide and remove the cover. Now push the battery pack into the compartment, until it securely fits the connector. Slide the cover back. Caution! Make sure the latch is securely locked. Otherwise the battery pack may fall when you carry the computer. For further details see the Panasonic CF-52 instruction manual. Startup /unpacking instructions VAS 6150 V

12 5 Power supply The power to the VAS 6150 is supplied either from the docking station (port replicator) connected to the mains supply, or the directly connected external power supply or the internal battery. Caution! The power supply is delivered with country specific mains cables. Should the power supply plug not fit your national mains supply, you can replace the mains cable with model (max. 4.5 m) commonly used in your country which complies with the standard for operation in earthed power supply networkd and is certified for the same (TN networks according to VDE 8085, EN 60950, IEC 950, UL 1950, CSA 22.2 No. 950). For operation in the US and Canada, please use a UL or CSA certified, oil resistant mains cable. Operation on non-earthed networks or networks earthed via impedance (IT networks) is not permitted. Also see the safety instructions at the back of the table of contents. Caution! Use only original Panasonic power supply (No. CF-AA5803A M2)! You can read further information regarding power supply in the Panasonic CF-52 instruction manual. 6 Startup The initial startup and any necessary system recovery must be performed outside the docking station (port replicator). For further information, refer Panasonic CF-52 instruction manual or VAS 6150 documentation links and recovery instructions. 6.1 Interface connections For further information, please follow Panasonic operating instructions for laptop (VAS 6150) and docking station (port replicator) Startup /unpacking instructions VAS 6150 V 1.00

13 6.2 Turning on Turn on the VAS For this, press the on/off button for about 1 s. The VAS 6150 will boot and the Windows GUI will appear. 6.3 Switching off For turning off the VAS 6150, press the on/off button again for about 1 s or click the "Start" button and select shut down. In the window that appears now, select the desired function by clicking it. Tip Do not press the on/off button too long! After 5 s the VAS 6150 initiates a forced shut down which can be useful when the application stops responding. However, the application can be corrupted, if the data is not correctly saved and the application is not correctly closed. Usually the tester attempts a normal shut down even here. 6.4 Windows XP license agreement You must accept the Windows XP license agreement in a window that appears when you start the VAS 6150 for the first time. Please accept the license agreement and click Weiter ("Next"). Startup /unpacking instructions VAS 6150 V

14 6.5 Diagnostic radio head VAS 5054A The VAS 6150 is already equipped with a Bluetooth interface for the operation of the VAS 5054A and is pre-installed for this. The diagnostic radio head is connected to the diagnostic interface of the vehicle and communicates with the diagnostic laptop using Bluetooth (wireless) or the USB cable. The diagnostic interface of the vehicle supplies power to the VAS 5054A. 6.6 Diagnostic interface VAS 5055 The diagnostic interface VAS 5055 makes the connection between the vehicle and the VAS 6150 via the permanently integrated USB cable. The VAS 5055 is connected to the diagnostic interface of the vehicle which supplies power to it. 6.7 Further information Before you start using the VAS 6150, you must also read the Panasonic CF-52 instruction manual with further important details regarding the device, accessories and their maintenance. For any provided and pre-installed application software, also take its accompanying documentation into consideration Startup /unpacking instructions VAS 6150 V 1.00

15 7 Troubleshooting The VAS 6150 left the factory in checked condition. Carefully selected components and the adherence to numerous quality control checks ensures a high reliability of the VAS Should, nevertheless, a problem occur, please proceed as follows: Please try to determine and localize the problem as precisely as possible. For this purpose, please consult the details in chapter "Troubleshooting" in the hardware instruction manual, before you contact the concerned customer service. Should the problem not be corrected with the help of the hardware instruction manual, please contact the concerned customer service (Siemens support hotline). For contact details and business hours of the respective support sites, please refer the VAS 505x service information (SI_VAS505XX_GER_V015_03.pdf) Startup /unpacking instructions VAS 6150 V

16 16-17 Startup /unpacking instructions VAS 6150 V 1.00

17 Appendix 1 VAS 6150 registration card VAS 6150 registration card Please fill the relevant fields and send to SPX Europe GmbH in Germany immediately. s2.vw-support@spx.com Fax No Dear Customer, You are receiving the VAS 6150 diagnostic laptop with unique service-related serial numbers. Please transfer these details to this form. 1. Registration data CF-52 laptop Docking station Diagnostic radio head/ diagnostic Serial number Serial number Serial number For ensuring the future support we require some data, in order to be able to support you in expansion, supplementation, repairs as well as in warranty processing in an organizationally optimal manner. Please answer the following questions in block letters with black ball-point pen. 2. Dealer data Authorised workshop Sales centre/importer no. Company name Contact person Postal address: Street Zip code Place Country Free workshop Company registration number 1 Tax identification no. 2 Telephone Fax Delivery address (if not the same as the postal address) Street Zip code Place Country 1. as to be entered/entered in the tester (assigned by VW, see installation instructions Basis CD) 2. only for EU countries When did you receive the device? Date Place Date Signature Stamp Issue date: July 2009