Intro to Intel Galileo - IoT Apps GERARDO CARMONA
|
|
- Beryl Harrell
- 7 years ago
- Views:
Transcription
1 Intro to Intel Galileo - IoT Apps GERARDO CARMONA IRVING LLAMAS Welcome! Campus Party Guadalajara 2015 Introduction In this course we will focus on how to get started with the Intel Galileo Gen 2 development board. Then we will explore some examples using different programming languages like: C/C++ Python JavaScript And finally we will program a basic IoT application connecting our board to a mobile phone or tablet using. 1
2 Getting Started - Hardware List of hardware: (1) Intel Galileo Gen 2 (1) USB Micro-B Cable (1) Ethernet cable (1) SD Card (1) Led any color (1) 330 ohms resistor (1) Push button (1) 10 Kohms resistor (1) breadboard (1) A phone or tablet (Android or ios)* Optional Some wires Getting Started - Software Arduino IDE Also we need to install Bonjour Print Services: Drives and Firmware SD Card Image for IoT What is Intel Galileo? A brief introduction to the board 2
3 What is Intel Galileo? The Intel Galileo Gen 2 development board is a microcontroller board based on the Intel Quark SoC X1000 application processor, a 32-bit Intel Pentium brand system on a chip (SoC). It is the first board based on Intel architecture designed to be hardware and software pin-compatible with shields designed for the Arduino Uno* R3. This platform provides the ease of Intel architecture development through support for the Microsoft Windows*, Mac OS*, and Linux* host operating systems. It also brings the simplicity of the Arduino integrated development environment (IDE) software. From Intel website, Galileo overview What is Intel Galileo? Intel Galileo Gen 2 From Intel website Galileo Gen 2 Components USB device port USB host port Pin 13 LED, Power LED and SD card LED Ethernet port 6 pin FTDI header 7 to 15 V input Micro SD Card slot Reboot Linux button Digital pins, some PWM, Serial, I2C and others RAM memory Quark SoC X1000 Power pins & analog pins Reset button (sketch) 3
4 Intel Galileo Gen 1 RS-232 USB client USB Host Ethernet Pin 13 LED 5 V input Micro SD slot SD card LED, power LED and Reset button Digital pins, some PWM, Serial, I2C and others Quark SoC X1000 RAM memory Power pins & analog pins Reboot Before we start Preparing the Intel Galileo board Install Driver 1. To install the driver go to: 2. Then click Intel Galileo Firmware Updater Tool link to start download. 4
5 Install Driver 1. Connect your wall adapter to your Intel Galileo board. 2. Connect the USB cable to your computer and the board 3. Wait a few seconds until your PC recognizes the board 4. Update driver software going to Device manager 5. Locate Intel Galileo, right click and select update driver software 6. In the new window select second option Search controller software on my computer 7. Locate the files you just decompress under driver folder Update Firmware 1. In the same folder, you have file named firmware-updater exe 2. Fill the next information: Making a bootable micro SD Card Get the latest image for IoT Edition here: Follow the instructions on the web page, you will need to download Win32DiskImager in order to burn the image into a SD card. 5
6 Update Driver Now with your Intel Galileo on and connected to your computer, navigate to My Computer and you will notice that you have a device named Intel Galileo, open it and you will find some folders, one of those folder is named drivers, you will need to update your driver software using this files. Arduino IDE First program Blink an Led Blink Example Open example: File >> Examples >> 01.Basics >> Blink Upload file. You should see the Led located near by the big USB port, it is marked as L, blinking. That means that everything is working fine. 6
7 Beyond Arduino Arduino + Linux Arduino + Linux You can combine the easy to use of Arduino and the power of an Operative System like Linux. Open example: 01-Arduino-Linux-get-ip.ino Secure Shell (SSH) Connecting to the Intel Galileo Linux side 7
8 Secure Shell (SSH) Secure Shell is a encrypted network protocol that initializes sessions on remote machines. We can connect to our Intel Galileo Linux-side using SSH. Follow the next steps: 1) Connect your Intel Galileo to your local network 2) Get PuTTy o r any other SSH client, for PuTTY go to: Secure Shell (SSH) 3) Open PuTTy and configure as shown 1. Select SSH 2. Write Galileo s IP address 3. Leave port as Click Open Secure Shell (SSH) 4) The following window opens 5) Type root in username and hit enter 8
9 Secure Shell (SSH) 6) Now you are inside Linux Yocto Project Playing with Linux Testing some basic commands in terminal Playing with Linux Now we can create files, folders, navigate though the Linux file system. First command to try is: $ ls It will display the content of the folder, in this case will show you some files that I created in the past. 9
10 Playing with Linux Now lets create a new folder named gerardo, type: $ mkdir gerardo Now type ls again to see the content of the folder again. Vi Editor Lets create a new file hello.txt and write on it some text. We are going to use a text editor called vi, so type: $ vi hello.txt You will see an empty file just like: Vi Editor To start editing this file press i (insert mode). Now you can type your text, after you finish, to save and exit file: Press escape key (exit editing mode) Type :wq (write and quit command) 10
11 Other Linux Commands If you want to display the content of a file in terminal write: Other commands You can find more Linux commands in the file Linux-commands.pdf Other Programing Languages C/C++, Python and node.js 11
12 Other Programing Languages Lets make a simple program that prints Hello world! to the console using different languages. C Create a new file named hello.c using vi Type the following code: #include <stdio.h> int main() { printf("hello world!\n"); return 0; } C Now we need to compile file using gcc compiler, type: $ gcc o helloc hello.c Execute the output file typing: $./helloc Output: 12
13 Python Create a new file named hello.py using vi Type the following code: print Hello world! Exit the file and in order to execute the file type in terminal: $ python hello.py Output: Node.js Create a new file named hello.js. Type the following code: console.log("hello world!"); Exit the file and type in terminal: $ node hello.js Output: Another IDE for Intel Galileo 13
14 With we can create IoT applications using the Intel Galileo and Intel Edison boards. Also we can develop mobile applications for any phone or tablet (Androir, ios, etc.) because it is made using HTML5, CSS and JS. Create an Account Follow steps IoT apps for Galileo and Edison HTM5 apps for mobile devices 14
15 Create a new file, click on Templates and select Onboard LED Blink
16 Steps for installing MRAA & UPM Library on Intel IoT Platform with IoT DevKit Linux* image. Using a ssh client: 1. echo "src maa-upm > /etc/opkg/intel-iotdk.conf 2. opkg update 3. opkg upgrade Instructions from the code comments 16
17 About MRAA Library It is written in C and ported to JS and Python, more information: First Program Code: First Program Upload and Run code. 1) Install/Build 2) Upload 3) Run
18 Set Interval of a Function Select New from Blank Template and write the following code: Run the code Wait for the second part! MAKEROBOTICSPROJECTS.COM OR MAKEROBOTS.TK 18
Intel Do-It-Yourself Challenge Lab 2: Intel Galileo s Linux side Nicolas Vailliet
Intel Do-It-Yourself Challenge Lab 2: Intel Galileo s Linux side Nicolas Vailliet www.intel-software-academic-program.com paul.guermonprez@intel.com Intel Software 2014-02-01 Prerequisites and objectives
More informationWorkshop Intel Galileo Board
Workshop Intel Galileo Board Introduction and Basics of Intel Galileo Board Walter Netto November 03th, 2014 Agenda Intel Galileo Board Overview Physical Characteristics Communication Processor Features
More informationChapter 1 Hardware and Software Introductions of pcduino
Chapter 1 Hardware and Software Introductions of pcduino pcduino is a high performance, cost effective mini PC platform that runs PC like OS such as Ubuntu Linux. It outputs its screen to HDMI enabled
More informationYun Shield User Manual VERSION: 1.0. Yun Shield User Manual 1 / 22. www.dragino.com
Yun Shield User Manual VERSION: 1.0 Version Description Date 0.1 Initiate 2014-Jun-21 1.0 Release 2014-Jul-08 Yun Shield User Manual 1 / 22 Index: 1 Introduction... 3 1.1 What is Yun Shield... 3 1.2 Specifications...
More informationCPSC 226 Lab Nine Fall 2015
CPSC 226 Lab Nine Fall 2015 Directions. Our overall lab goal is to learn how to use BBB/Debian as a typical Linux/ARM embedded environment, program in a traditional Linux C programming environment, and
More informationMediaTek LinkIt Smart 7688 FAQ
Version: 1.0 Release date: 1 st December 2015 Specifications are subject to change without notice. 2015 MediaTek Inc. Unauthorized reproduction of this information in whole or in part is strictly prohibited.
More informationA REST API for Arduino & the CC3000 WiFi Chip
A REST API for Arduino & the CC3000 WiFi Chip Created by Marc-Olivier Schwartz Last updated on 2014-04-22 03:01:12 PM EDT Guide Contents Guide Contents Overview Hardware configuration Installing the library
More informationThinLinX TLXOS 64-bit Firmware Installation Guide for the Intel NUC Range. Materials Required
ThinLinX TLXOS 64-bit Firmware Installation Guide for the Intel NUC Range The Intel NUC is a small form factor computer that incorporates several models from Intel Core processors to the economical Single
More informationYamaha 01V96 Version2 Upgrade Guide
Yamaha 01V96 Version2 Upgrade Guide This document explains how to upgrade the 01V96 system software to V2.00 or later. Precautions (please be sure to read these precautions) The user assumes full responsibility
More informationPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Safety Precautions Read and understand this specifications, instruction manual, installation manual and catalog to make proper use of the product. WARNING If critical situations that could lead to user
More informationGauge Drawing Tool... 8. Slider Drawing Tool... 8. Toggle Button Drawing Tool... 8. One-Way List Drawing Tool... 8
v. 20120510 Table of Contents RTiPanel Overview and Requirements... 3 Software Requirements:... 3 Hardware Requirements:... 3 Network Requirements:... 3 Licensing Requirements:... 4 Basic Integration Designer
More informationhttp://docs.trendmicro.com
Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Before installing and using the product, please review the readme files,
More informationE-Blocks Easy Internet Bundle
Page 1 Cover Page Page 2 Flowcode Installing Flowcode Instruction for installing Flowcode can be found inside the installation booklet located inside the Flowcode DVD case. Before starting with the course
More informationhttp://docs.trendmicro.com
Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Before installing and using the product, please review the readme files,
More informationGSM Click - Cross-Platform Development Quick Start Guide
GSM Click - Cross-Platform Development Quick Start Guide Overview This document explains how to use the MikroElektronika GSM Click board as an accessory to the following host development platforms (microcontrollers):
More informationExample Connection between USB Host and Android
Example connection between USB Host and Android Example Connection between USB Host and Android This example illustrates the connection between Board ETMEGA2560-ADK and Android through Port USB Host. In
More informationIn-System Programmer USER MANUAL RN-ISP-UM RN-WIFLYCR-UM-.01. www.rovingnetworks.com 1
RN-WIFLYCR-UM-.01 RN-ISP-UM In-System Programmer 2012 Roving Networks. All rights reserved. Version 1.1 1/19/2012 USER MANUAL www.rovingnetworks.com 1 OVERVIEW You use Roving Networks In-System-Programmer
More informationHow to use the VMware Workstation / Player to create an ISaGRAF (Ver. 3.55) development environment?
Author Janice Hong Version 1.0.0 Date Mar. 2014 Page 1/56 How to use the VMware Workstation / Player to create an ISaGRAF (Ver. 3.55) development environment? Application Note The 32-bit operating system
More informationTo perform Ethernet setup and communication verification, first perform RS232 setup and communication verification:
PURPOSE Verify that communication is established for the following products programming option (488.2 compliant, SCPI only): DCS - M9C & DCS M130, DLM M9E & DLM-M9G & DLM M130, DHP - M9D, P series, SG,
More informationBoard also Supports MicroBridge
This product is ATmega2560 based Freeduino-Mega with USB Host Interface to Communicate with Android Powered Devices* like Android Phone or Tab using Android Open Accessory API and Development Kit (ADK)
More informationQuick Installation Guide
Quick Installation Guide (For Windows & Mac OS) Outdoor Wireless IP Camera Package Contents V1.1 IP Camera Power Adapter Resource CD Ethernet Cable Mounting Bracket(except FI8919) Wi-Fi Antenna Quick Installation
More informationCS 589 Project Smart Home Hub, Phase I Due before 9am on October 21, 2015
CS 589 Project Smart Home Hub, Phase I Due before 9am on October 21, 2015 Overview So far, we have learned the basics and underlying principles of embedded software and systems, and have begun to study
More informationwww.dragino.com Yun Shield Quick Start Guide VERSION: 1.0 Version Description Date 1.0 Release 2014-Jul-08 Yun Shield Quick Start Guide 1 / 14
Yun Shield Quick Start Guide VERSION: 1.0 Version Description Date 1.0 Release 2014-Jul-08 Yun Shield Quick Start Guide 1 / 14 Index: 1 Introduction... 3 1.1 About this quick start guide... 3 1.2 What
More informationColorfly Tablet Upgrade Guide
Colorfly Tablet Upgrade Guide (PhoenixSuit) 1. Downloading the Firmware and Upgrade Tool 1. Visit the official website http://www.colorful.cn/, choose 产 品 > 数 码 类 > 平 板 电 脑, and click the product to be
More informationAccessing I2C devices with Digi Embedded Linux 5.2 example on Digi Connect ME 9210
Accessing I2C devices with Digi Embedded Linux 5.2 example on Digi Connect ME 9210 Document History Date Version Change Description 17/09/2010 Initial entry/outline 24/02/2011 V1.1 Retested with latest
More informationUsing Microsoft Visual Studio 2010. API Reference
2010 API Reference Published: 2014-02-19 SWD-20140219103929387 Contents 1... 4 Key features of the Visual Studio plug-in... 4 Get started...5 Request a vendor account... 5 Get code signing and debug token
More informationVHA Innovations Program Future Technology Laboratory. Linux Workstation Remote Desktop Connection Manual 2014-10- 01
VHA Innovations Program Future Technology Laboratory Linux Workstation Remote Desktop Connection Manual 2014-10- 01 Table of Contents VHA Innovations Program... 1 Purpose... 3 Prerequisites... 3 Windows
More informationAdRadionet to IBM Bluemix Connectivity Quickstart User Guide
AdRadionet to IBM Bluemix Connectivity Quickstart User Guide Platform: EV-ADRN-WSN-1Z Evaluation Kit, AdRadionet-to-IBM-Bluemix-Connectivity January 20, 2015 Table of Contents Introduction... 3 Things
More informationAdafruit's Raspberry Pi Lesson 5. Using a Console Cable
Adafruit's Raspberry Pi Lesson 5. Using a Console Cable Created by Simon Monk Last updated on 2014-09-15 12:00:13 PM EDT Guide Contents Guide Contents Overview You Will Need Part Software Installation
More informationHoneywell Internet Connection Module
Honeywell Internet Connection Module Setup Guide Version 1.0 - Page 1 of 18 - ICM Setup Guide Technical Support Setup - Guide Table of Contents Introduction... 3 Network Setup and Configuration... 4 Setting
More information10 STEPS TO YOUR FIRST QNX PROGRAM. QUICKSTART GUIDE Second Edition
10 STEPS TO YOUR FIRST QNX PROGRAM QUICKSTART GUIDE Second Edition QNX QUICKSTART GUIDE A guide to help you install and configure the QNX Momentics tools and the QNX Neutrino operating system, so you can
More informationEquinox L5300 Installation and Configuration Guide Version 1.0 Innovative Payment Processing Solutions for Businesses
January 2016 Equinox L5300 Installation and Configuration Guide Version 1.0 Innovative Payment Processing Solutions for Businesses Contents 1. Terminal Installation... 3 1.1 Terminal Installation Ethernet
More informationPHYS 2P32 Project: MIDI for Arduino/ 8 Note Keyboard
PHYS 2P32 Project: MIDI for Arduino/ 8 Note Keyboard University April 13, 2016 About Arduino: The Board Variety of models of Arduino Board (I am using Arduino Uno) Microcontroller constructd similarly
More informationBeyond THE Blinky LED: Voice recognition, Face recognition and cloud connectivity for IOT Edge devices
Beyond THE Blinky LED: Voice recognition, Face recognition and cloud connectivity for IOT Edge devices Stewart Christie Internet of Things Community Manager. Agenda IoT Scenarios Adventure Tracker Demo
More informationUSB to RS-422/485 Serial Adapter
USB to RS-422/485 Serial Adapter User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2
More informationSystem Firmware Update Instructions for AVH-4000NEX
System Firmware Update Instructions for AVH-4000NEX IMPORTANT Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you
More informationModern Robotics, Inc Core Device Discovery Utility. Modern Robotics Inc, 2015
Modern Robotics, Inc Core Device Discovery Utility Modern Robotics Inc, 2015 Version 1.0.1 October 27, 2015 Core Device Discovery Application Guide The Core Device Discovery utility allows you to retrieve
More informationEclipse installation, configuration and operation
Eclipse installation, configuration and operation This document aims to walk through the procedures to setup eclipse on different platforms for java programming and to load in the course libraries for
More informationWindows 10 IoT The Big Reboot By Sean D. Liming and John R. Malin Annabooks www.annabooks.com
Windows 10 IoT The Big Reboot By Sean D. Liming and John R. Malin Annabooks www.annabooks.com July 28, 2015 For those developing with Windows Embedded, there has been some frustration on the lack of future
More informationChapter1. Interface Introduction
Robustel GoRugged R3000 Quick Guide Chapter1. Interface Introduction 1.1 LED Indicators After inserting the SIM card into the router and power on, the LED indicators status should be as follow when work
More informationHow To Set Up A Backupassist For An Raspberry Netbook With A Data Host On A Nsync Server On A Usb 2 (Qnap) On A Netbook (Qnet) On An Usb 2 On A Cdnap (
WHITEPAPER BackupAssist Version 5.1 www.backupassist.com Cortex I.T. Labs 2001-2008 2 Contents Introduction... 3 Hardware Setup Instructions... 3 QNAP TS-409... 3 Netgear ReadyNas NV+... 5 Drobo rev1...
More informationUltra Thin Client TC-401 TC-402. Users s Guide
Ultra Thin Client TC-401 TC-402 Users s Guide CONTENT 1. OVERVIEW... 3 1.1 HARDWARE SPECIFICATION... 3 1.2 SOFTWARE OVERVIEW... 4 1.3 HARDWARE OVERVIEW...5 1.4 NETWORK CONNECTION... 7 2. INSTALLING THE
More informationDUKANE Intelligent Assembly Solutions
PC Configuration Requirements: Configuration Requirements for ipc Operation The hardware and operating system of the PC must comply with a list of minimum requirements for proper operation with the ipc
More informationERIKA Enterprise pre-built Virtual Machine
ERIKA Enterprise pre-built Virtual Machine with support for Arduino, STM32, and others Version: 1.0 July 2, 2014 About Evidence S.r.l. Evidence is a company operating in the field of software for embedded
More informationUpgrade your Software
Video server software From time to time software upgrades are issued for the video servers. These are posted on our website www.ad-networkvideo.com or on the product CD and consist of two parts, the application
More informationBeagleBone Black: Installing Operating Systems
BeagleBone Black: Installing Operating Systems Created by Justin Cooper Last updated on 2015-01-16 11:00:15 AM EST Guide Contents Guide Contents Overview Choosing an Operating System Angstrom Download
More informationRead Me UNISTREAM AUTOMATION IDE
Read Me UNILOGIC SOFTWARE UNISTREAM AUTOMATION IDE Unitronics UniLogic software is the programming Integrated Development Environment (IDE) you use to configure hardware, communications, and develop both
More informationDigi Connect Wan 3G Application Guide Update the firmware, backup and restore the configuration of a Digi Connect Wan 3G using a USB flash drive.
1. Configure and prepare required files on the USB flash drive to allow firmware update and configuration backup/restore. Objective: Step by step instructions to upgrade the firmware, backup and restore
More informationAdafruit's Raspberry Pi Lesson 5. Using a Console Cable
Adafruit's Raspberry Pi Lesson 5. Using a Console Cable Created by Simon Monk Last updated on 2016-04-12 08:03:49 PM EDT Guide Contents Guide Contents Overview You Will Need Part Software Installation
More informationFiery Clone Tool For Embedded Servers User Guide
Fiery Clone Tool For Embedded Servers User Guide Fiery Clone Tool allows you to clone image files to a folder on a USB flash drive connected to the Fiery server. You can restore the image file to the Fiery
More informationCOMBOGARDPRO. 39E Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS
COMBOGARDPRO 39E Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS IMPLEMENTATION PACKAGE The ComboGard Pro Software implementation package includes: 707012 ComboGard Pro Software Install
More information1 DVR 670 Series firmware version 2.1.2 (date 2014-06-17)
Video Recorder 670 Series 1 DVR 670 Series firmware version 2.1.2 (date 2014-06-17) File name: 600rtseries_2.1.2_140617.bin - When a unit detects a HDD error, the DVR will automatically reboot so that
More informationU90Ladder / VisiLogic /UniLogic and software utilities system requirements. Contents
U90Ladder / VisiLogic /UniLogic and software utilities system requirements Contents Minimum System Requirements... Error! Bookmark not defined. UniLogic Installation... 3 Firmware Update and Management...
More information3.5 LAN HDD Enclosure User s Manual
3.5 LAN HDD Enclosure User s Manual NOTE: 1. USB and LAN can t be used at the same time. 2. HDD should be formatted as FAT32. Please check Disk utility section in this manual. 3. For internet FTP usage,
More informationNetwork Licensing. White Paper 0-15Apr014ks(WP02_Network) Network Licensing with the CRYPTO-BOX. White Paper
WP2 Subject: with the CRYPTO-BOX Version: Smarx OS PPK 5.90 and higher 0-15Apr014ks(WP02_Network).odt Last Update: 28 April 2014 Target Operating Systems: Windows 8/7/Vista (32 & 64 bit), XP, Linux, OS
More informationEthernet Interface Manual Thermal / Label Printer. Rev. 1.01 Metapace T-1. Metapace T-2 Metapace L-1 Metapace L-2
Ethernet Interface Manual Thermal / Label Printer Rev. 1.01 Metapace T-1 Metapace T-2 Metapace L-1 Metapace L-2 Table of contents 1. Interface setting Guiding...3 2. Manual Information...4 3. Interface
More informationDigital Photo Bank / Portable HDD Pan Ocean E350 User Manual
Digital Photo Bank / Portable HDD Pan Ocean E350 User Manual Installing a hard disk 1. Power off the unit. 2. Remove the bottom cover from the unit by removing four screws. 3. Insert the 2.5 HDD to the
More informationSOFTWARE INSTALLATION INSTRUCTIONS
AUDITGARD LGA Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS Implementation Package The AuditGard Software implementation package includes: 707013 AuditGard Software Install CD 42145 Programming/Audit
More informationVirtual Workplace Personal Device Client Installation Instructions
Virtual Workplace Personal Device Client Installation Instructions 1 Table of Contents About this Installation Guide... 2 Client Overview... 2 VMware Horizon View Clients... 2 UniPrint Clients... 3 Client
More informationSigniant Agent installation
Signiant Agent installation Release 11.3.0 March 2015 ABSTRACT Guidelines to install the Signiant Agent software for the WCPApp. The following instructions are adapted from the Signiant original documentation
More informationAdafruit's Raspberry Pi Lesson 5. Using a Console Cable. Created by Simon Monk
Adafruit's Raspberry Pi Lesson 5. Using a Console Cable Created by Simon Monk Guide Contents Guide Contents Overview You Will Need Part Software Installation (Mac) Software Installation (Windows) Connect
More informationAPNT#1209 Using GP-Pro EX in Windows 7 XP Mode. Introduction. Prerequisites. Licensing and availability of XP Mode
Application Note #1209: Using GP-Pro EX in Windows 7 XP Mode Introduction IMPORTANT NOTE: GP-Pro EX v3.0 and later is supported on 32 and 64 bit Windows 7. We recommend upgrading to the latest version
More informationInstallation Guide v1.11 and Higher
Progeny Imaging Installation Guide v1.11 and Higher 00-02-1604 Rev. D ECN P3483 Revision Date: 6/2/2015 0120 Contents 1. About This Manual... 3 Text Conventions... 3 2. Welcome to Progeny Imaging... 4
More informationCurrent Cost Data Cable User Guide. Installing and configuring the data cable
Current Cost Data Cable User Guide Installing and configuring the data cable Contents About the Data Cable... 3 Data Cable Installation Steps... 3 Post Installation Checks... 3 So the driver is installed,
More informationWaspmote. Quickstart Guide
Waspmote Quickstart Guide Index Document version: v4.3-11/2014 Libelium Comunicaciones Distribuidas S.L. INDEX 1. Introduction... 3 2. General and safety information... 4 3. Waspmote s Hardware Setup...
More informationUSBSPYDER08 Discovery Kit for Freescale MC9RS08KA, MC9S08QD and MC9S08QG Microcontrollers User s Manual
USBSPYDER08 Discovery Kit for Freescale MC9RS08KA, MC9S08QD and MC9S08QG Microcontrollers User s Manual Copyright 2007 SofTec Microsystems DC01197 We want your feedback! SofTec Microsystems is always on
More informationHypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide
Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide Hypercom Corporation 8888 East Raintree Drive Scottsdale, Arizona 85260 USA Corporate Telephone: 480.642.5000 Corporate
More informationSNMP Manager User s Manual
SNMP Manager User s Manual Table of Contents 1. Introduction...2 2. SNMP Manager Install, Quick Start and Uninstall...2 2.1. Software Installation...2 2.2. Software Quick Start...2 2.3. Software Uninstall...2
More informationInstalling a Westell USB Network Adapter
Installing a Westell USB Network Adapter Before You Begin Before you begin installing your Westell USB Network adapter: 1. Make sure the computer with the USB adapter meets the minimum system requirements
More informationPARALLELS SERVER 4 BARE METAL README
PARALLELS SERVER 4 BARE METAL README This document provides the first-priority information on Parallels Server 4 Bare Metal and supplements the included documentation. TABLE OF CONTENTS 1 About Parallels
More informationThinPoint Quick Start Guide
ThinPoint Quick Start Guide 2 ThinPoint Quick Start Guide Table of Contents Part 1 Introduction 3 Part 2 ThinPoint Windows Host Installation 3 1 Compatibility... list 3 2 Pre-requisites... 3 3 Installation...
More informationNETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server
Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server NETWORK USER S GUIDE This Network User's Guide provides useful information of wired and wireless
More informationDeviceAnywhere Enterprise. ios Device Onboarding Guide
DeviceAnywhere Enterprise ios Device Onboarding Guide DeviceAnywhere Enterprise ios Device Onboarding Guide DeviceAnywhere Enterprise 6.2.1 DeviceAnywhere Enterprise Automation 6.2.1 DeviceAnywhere Enterprise
More informationUser Manual Web Operating Panel AP User Manual. General Settings, Updating and Troubleshooting
User Manual Web Operating Panel AP User Manual General Settings, Updating and Troubleshooting Copyright The documentation and the software included with this product are copyrighted 2010 by Advantech Co.,
More informationRaspberry Pi Setup Tutorial
Raspberry Pi Setup Tutorial The Raspberry Pi is basically a miniature linux- based computer. It has an ARM processor on it, specifically the ARM1176JZF- S 700 MHz processor. This is the main reason why
More informationWaspmote IDE. User Guide
Waspmote IDE User Guide Index Document Version: v4.1-01/2014 Libelium Comunicaciones Distribuidas S.L. INDEX 1. Introduction... 3 1.1. New features...3 1.2. Other notes...3 2. Installation... 4 2.1. Windows...4
More informationMonitor Your Home With the Raspberry Pi B+
Monitor Your Home With the Raspberry Pi B+ Created by Marc-Olivier Schwartz Last updated on 2015-02-12 03:30:13 PM EST Guide Contents Guide Contents Introduction Hardware & Software Requirements Hardware
More informationAdditional Information: SSH, PuTTY, and VmWare
Additional Information: SSH, PuTTY, and VmWare Gianpierre Villagomez EECS 268 Additional Information: SSH, PuTTY, and VMware 1 EECS Linux machine remote access There are several ways you can access EECS
More informationCore Protection for Virtual Machines 1
Core Protection for Virtual Machines 1 Comprehensive Threat Protection for Virtual Environments. Installation Guide e Endpoint Security Trend Micro Incorporated reserves the right to make changes to this
More informationUser guide. Business Email
User guide Business Email June 2013 Contents Introduction 3 Logging on to the UC Management Centre User Interface 3 Exchange User Summary 4 Downloading Outlook 5 Outlook Configuration 6 Configuring Outlook
More informationArduino Lesson 1. Blink
Arduino Lesson 1. Blink Created by Simon Monk Last updated on 2015-01-15 09:45:38 PM EST Guide Contents Guide Contents Overview Parts Part Qty The 'L' LED Loading the 'Blink' Example Saving a Copy of 'Blink'
More informationIt is recommended that you use a clean installation of Lion client before upgrading to Lion Server.
Wazza s Lion Server QuickStart 1. Installing Lion Server About this Document This document is the first in a series of documents describing the process of installing and configuring a Mac OS X 10.7 Server
More informationApplication Note. Creating CompactFlash Card with CF Manager
Creating CompactFlash Card with CF Manager 12th May, 2006 OVERVIEW CUE CF Manager is used to write CompactFlash memory cards, for all CUE equipment which supports CompactFlash. The CF Manager provides
More informationQuickSpecs. Overview. Compaq Remote Insight Lights-Out Edition
Overview M ODELS Remote Insight Lights-Out Edition 157866-001 New Remote Insight Lights-Out Edition provides virtual graphical control using any standard browser to your remote or data centre server, giving
More information1. Product Information
ORIXCLOUD BACKUP CLIENT USER MANUAL LINUX 1. Product Information Product: Orixcloud Backup Client for Linux Version: 4.1.7 1.1 System Requirements Linux (RedHat, SuSE, Debian and Debian based systems such
More informationBASIC INSTRUCTIONS TO CONFIGURE ZYXEL P8701T CPE USING THE WEB INTERFACE
BASIC INSTRUCTIONS TO CONFIGURE ZYXEL P8701T CPE USING THE WEB INTERFACE 12/11/2012 Index 1 INTRODUCTION... 1-1 2 FACTORY DEFAULT SETTINGS... 2-1 3 CPE BASIC OPERATIONS... 3-1 3.1 PASSWORD MODIFICATION...
More informationIn order to enable BitLocker, your hard drive must be partitioned in a particular manner.
ENABLE BITLOCKER ON WINDOWS VISTA - WITHOUT A TPM Requirements: You must be running Vista Enterprise or Vista Ultimate to enable BitLocker. Any other version of Vista is not compatible. It is recommended
More informationPentesting Android Mobile Application
Pentesting Android Mobile Application Overview on Mobile applications Connect in Superior Way!! Mobile market is the worldwide rapidly developing segments since many customers are using mobile phones.
More informationTOSR0X-D. USB/Wireless Timer Relay Module. User Manual. Tinysine Electronics @ 2013 Version 1.0
TOSR0X-D USB/Wireless Timer Relay Module User Manual Tinysine Electronics @ 2013 Version 1.0 INTRODUCTION This USB/Wireless Timer Relay Module allows computer control switching of external devices by using
More informationMeshBee Open Source ZigBee RF Module CookBook
MeshBee Open Source ZigBee RF Module CookBook 2014 Seeed Technology Inc. www.seeedstudio.com 1 Doc Version Date Author Remark v0.1 2014/05/07 Created 2 Table of contents Table of contents Chapter 1: Getting
More informationComputer Requirements
Installing Pro64 Network Manager It is recommended that you quit all running Windows applications before starting the Aviom Pro64 Network Manager installation process. Check the Aviom website (www.aviom.com)
More informationReboot the ExtraHop System and Test Hardware with the Rescue USB Flash Drive
Reboot the ExtraHop System and Test Hardware with the Rescue USB Flash Drive This guide explains how to create and use a Rescue USB flash drive to reinstall and recover the ExtraHop system. When booting
More informationFile Management Utility. T u t o r i a l
File Management Utility T u t o r i a l Contents System Requirements... 2 Preparing Files for Transfer to GlobalMark... 2 Application Launch... 2 Printer Setup... 2 Communication Status... 4 Communication
More informationAddonics T E C H N O L O G I E S. NAS Adapter. Model: NASU2. 1.0 Key Features
1.0 Key Features Addonics T E C H N O L O G I E S NAS Adapter Model: NASU2 User Manual Convert any USB 2.0 / 1.1 mass storage device into a Network Attached Storage device Great for adding Addonics Storage
More informationArduino Due Back. Warning: Unlike other Arduino boards, the Arduino Due board runs at 3.3V. The maximum. Overview
R Arduino Due Arduino Due Front Arduino Due Back Overview The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit
More informationTutorial: Configuring GOOSE in MiCOM S1 Studio 1. Requirements
Tutorial: Configuring GOOSE in MiCOM S1 Studio 1. Requirements - Two (2) MiCOM Px4x IEDs with Version 2 implementation of IEC 61850 - Two (2) Cat 5E Ethernet cable - An Ethernet switch 10/100 Mbps - MiCOM
More informationForcepoint Sidewinder, Virtual Appliance Evaluation for Desktop. Installation Guide 8.x. Revision A
Forcepoint Sidewinder, Virtual Appliance Evaluation for Desktop Installation Guide 8.x Revision A Table of contents 1 Overview...3 2 Verify system requirements...4 Virtualization requirements...4 Admin
More informationTable of Contents. Chapter1. Introduction...1. 1.1 Before Installation... 1 1.2 System Requirements... 1
Table of Contents Chapter1. Introduction...1 1.1 Before Installation... 1 1.2 System Requirements... 1 Chapter2. IVS-110 1-Channel Internet Video Server...2 2.1 Package Content... 2 2.2 Physical Installation...
More informationStep by Step. Use the Cloud Login Website
Step by Step HOW TO Use the Cloud Login Website This How To article will show you how to use the Cloud Login Website to upload and download your files from the cloud. For a complete list of available How
More informationRemote Access to Unix Machines
Remote Access to Unix Machines Alvin R. Lebeck Department of Computer Science Department of Electrical and Computer Engineering Duke University Overview We are using OIT Linux machines for some homework
More information