Introduction 3. Orbit SIngle Tube Reader 5. Scope USB Single Tube Reader 6. FluidX Active Cryoprotection System 12. Impression Rapid Rack Scanner 14

Transcription

1 2 D B a r c o d e R e a d e r R a n g e V e r s i o n 3. 0 J u n e w w w. f l u i d x. e u

2 CONTENTS Introduction 3 FluidX Orbit TM and Scope TM Range of Single Tube Readers 4 Orbit SIngle Tube Reader 5 Scope USB Single Tube Reader 6 Scope Wireless TM Single Tube Reader 8 FluidX Impression TM Range of Whole Rack 1D and 2D Barcode Scanners 10 FluidX Active Cryoprotection System 12 Impression Rapid Rack Scanner 14 Impression Enhanced Rack Scanner 16 Impression Enhanced Rack Scanner (LE) 18 Impression Multi Rack Scanner 20 FluidX Perception TM Range of Whole Rack 1D and 2D Barcode Readers 22 Perception Industrial Rack Reader 24 Perception Rapid Rack Reader for SBS Racks 26 Perception Rapid Rack Reader for Legacy Cryo Racks 28 FluidX Software EasyTrack Sample Management Software 30 IntelliCode TM Decoding Software 32 Starter Packs Sample Storage Starter Pack 34 Perception Starter Pack 35 Reader Overview Tables 36 Key to symbols used No mains power required Compatible with Windows operating systems (See product specifications for details) Read time less than 1 second Compatible with ios (See product specifications for details) Reader fitted with FluidX Active Cryoprotection System Compatible with Android Operating Systems (See product specifications for details) Reader compatible with SBS format racks Requires only 1 USB connection for both power and data transfer

3 FluidX range of 1D & 2D Barcoded Tube and Rack Readers Introduction The team at FluidX probably know more about 2D barcoded storage tubes and readers than any other group in the world. As part of the team that developed the very first 2D datamatrix barcoded tubes back in 1999 we also introduced the first scanner capable of identifying a whole rack of 96 tubes. Our latest range of single tube and whole rack readers are the result of over fifteen years of continuous development and innovation. While our competitors play catch-up we focus on continual development and innovation to bring the best products, with the most useful features, to our customers. We hope you find our latest range of scanners and readers as exciting as we do. Here are a few highlights to whet your appetite... The FluidX Scope TM Wireless Single Tube Reader The Scope Single Tube Reader features built-in hardware decoding so it can be used without installing software first, simply Plug and Play. Compatible with a wide range of operating systems. The Scope Wireless is the first wireless single tube 2D reader that connects to a tablet, including ipad and Android devices. Our latest decoding software, IntelliCode, is built on the very latest development platform to ensure continuity for many years to come. We ve incorporated all the elements from our previous software to ensure compatibility with current FluidX systems, while adding new options and features. IntelliCode has been designed to meet today s, and tomorrow s, requirements. The FluidX Perception TM Industrial Rack Reader The first rack reader which is impervious to water, dust and gases (IP65 rated) and proven to be capable of reliable decoding at -40 C. The FluidX Perception Industrial Reader is used in many of the world s largest, fully automated Biobanks. FluidX believes in developing the right product for the right use. We achieve this by listening to our customers, making sure that we understand their applications and goals, and then identifying the best solution - sometimes we manage this even before our customers know they have a problem that needs solving! We appreciate that not every customer can use our range of 2D sample storage tubes, even if we do have the best and widest range of tubes on the market, so we make sure our readers can be used with all 2D barcoded tubes available. We also provide active support to all FluidX customers, whatever tube type they use. Nothing surprises us. Over the past fifteen years we ve dealt with every tube style, and make, imaginable! FluidX Perception TM Rapid Rack Reader The fastest rack reader on the market. The Perception Rapid reader is capable of reading at a speed of 3ms per tube, just 300ms to read a rack of 96 tubes, and it can be used with all 2D barcoded sample storage tubes. The Perception Rapid also possesses the smallest footprint of all rack readers currently available to save bench space. The FluidX Impression TM Multi Rack Scanner FluidX were the first group to develop a scanner capable of reading more than one rack at a time. Our Impression range of rack scanners offers unrivalled specifications for a competitive price. Try us, we will never be beaten on cost. The FluidX Active Cryoprotection System FluidX developed the very first cryoprotective system for rack readers 4 years ago. Only FluidX readers feature an active cryoprotection system that not only enables multiple racks to be read without difficulty straight from a freezer but also prevents the damage to electronic components often associated with passive technology. Simultaneous rack 2D identifier reading FluidX were the first to supply a unique 2D Data Matrix barcode identifier to racks to provide automatic rack orientation. All our rack readers will read both rack and tube 2D barcodes simultaneously and auto-orientate the rack. 3

4 Single Tube Readers for 1D and 2D Barcodes Orbit TM and Scope TM Single Tube Readers Overview FluidX Orbit TM Single Tube Reader For high performance and dependable decoding at a low cost. (cat no ) FluidX Scope TM USB Single Tube Reader Instant Plug and Play reading of all 2D barcoded tubes and 1D barcoded racks. (cat no ) FluidX Scope TM Wireless Single Tube Reader with Bluetooth The first single tube 1D and 2D barcode reader to connect to ipad and Android tablets. Plug and Play, no software required. (cat no A) Data exported directly to any application The FluidX keyboard wedge lets you to enter the results into any application. Simply place the cursor where the data is to be be entered and scan the tube, the results will be instantly displayed wherever the cursor is positioned. All FluidX single tube readers will insert data into any application, including Excel, Notepad etc. Large scanning window and target lights When combined with our superior decoding technology, the large scanning window makes tube reading fool-proof, even using gloves. All Scope readers feature blue LED target lights to make positioning even easier. FluidX Scope TM Wireless Single Tube Reader with Bluetooth and Tablet As above, but supplied with 10" Lenovo Android Tablet. (cat no B) Quick set up All Scope Single Tube Readers are Plug and Play, there s no software to install so just unpack and go. Pairing the Scope Wireless Reader with a tablet is easy, simply scan the barcode supplied in the manual. Wireless connection to tablet The Scope Wireless Single Tube Reader, for 1D and 2D barcodes, connects to both ipad and Android tablets. With Bluetooth connection you can identify samples anywhere, anytime. FluidX Scope TM Wireless Single Tube Reader with Bluetooth modem Allows wireless reader to be connected instantly to any laptop, PC or Mac. (cat no C) Orbit Single Tube Reader Scope Wireless Single Tube Reader with ipad Scope Single Tube Reader provides instant decoding of both 1D and 2D barcodes 4

5 Single Tube Readers for 1D and 2D Barcodes FluidX Orbit TM Range Single Tube Reader The FluidX Orbit TM Single Tube Reader. For high performance decoding at a low price. Use with all 2D barcoded tubes, any make, any size. All FluidX Single Tube Readers are compatible with any 2D Data Matrix barcoded tubes including those supplied by Greiner, Matrix, Nunc, Micronic and of course, FluidX. Size does not matter, the FluidX Orbit Reader will quickly scan tubes in 24, 48, 96, 240 and 384 rack formats, as well as larger capacity tubes including glass compound storage tubes, cryo tubes and biological sample tubes. Dependable decoding The team at FluidX were involved in developing the very first 2D barcoded tubes and readers and today our scanners are the result of more than 15 years of continuous development. We know our stuff! We supply a 5 year warranty on all FluidX Single Tube Readers. Quick to set up The FluidX Orbit Single Tube Reader takes just moments to set up with automatic calibration. Simply plug into a PC or laptop and our software will do the rest! Want to read a less common tube type? No problem, simply select the auto-learn feature and our software will take care of that too. Uses a USB connection to laptop or PC, so no additional power supply is required. Specifications Code formats Sensor type Light source Read time Ambient operating temperature Datamatrix, ISO 16022, square and rectangular format, ECC200, 0 to 20 grid sizes, white on black, black on white, numeric and alphanumeric 1/3 CCD R LED Less than 1 second per tube 5 to 50 C Easy to use with gloves The large scanning window and superior decoding technology makes tube reading fool-proof! Results in an instant All our Single Tube Readers take less than a second to scan and decode any 2D barcoded tube. The tube ID is displayed instantly on the computer screen for identification or sample entry, or you can run the application in the background. Data exported direct to any application Simply place your cursor where you want results to be entered and scan the tube. The data will be instantly displayed wherever the cursor is positioned. The reader will insert data into any application including Excel, Notepad, etc. Tube compatibility Dimensions Weight Power requirements User interface All tubes in 24, 48, 96, 240 and 384-formats. Glass compound storage tubes, cryo tubes, biological sample tubes 90mm (H) X 100mm (W) X 100mm (D) 0.25 Kg Cable length 1.5m 5V DC 0.1A max. supplied through USB FluidX GUI Cable interface USB 2.0 Operating system Windows XP, Windows 7 and Windows 8. Ordering Information Catalog No Description FluidX Orbit Single Tube Reader For use with all 2D Data Matrix barcoded sample storage tubes. 5

6 Single Tube Readers for 1D and 2D Barcodes FluidX Scope TM Range USB Single Tube Reader * The FluidX Scope TM USB Single Tube Reader. Instant Plug and Play decoding of both 1D and 2D barcodes. Use with all 2D barcoded tubes, any make, any size. FluidX Single Tube Readers are compatible with any 2D Data Matrix barcoded tubes including those supplied by Greiner, Matrix, Nunc, Micronic and of course, FluidX tubes. Size does not matter, the FluidX USB Single Tube Reader will quickly scan tubes in 24, 48, 96, 240 and 384 rack formats, and also larger capacity tubes including glass compound storage tubes, cryo tubes and biological sample tubes. Instant 1D and 2D barcode reading The total time between scanning a barcode and seeing the result displayed is less than a second! The tube ID is displayed instantly on the computer screen for identification or sample entry, or you may chose to run the application in the background. Use straight away Simply Plug and Play to start using. There s no need to calibrate, and no drivers or software to install, before scanning your first 1D or 2D barcode. Easy reading of linear barcodes on racks and tubes With a large scan window, and superior decoding technology, the Scope USB Single Tube Reader easily decodes 1D barcodes on racks and tubes. Simple to use, even with gloves Blue LED target lights are emitted so that positioning the barcode for scanning is easy, even wearing gloves. The reader then automatically scans the barcode (either 1D or 2D) and confirms a good read. Dependable decoding The team at FluidX were involved in developing the very first 2D barcoded tubes and readers, today our scanners are the result of more than 15 years of continuous development. We know our stuff! We supply a 5 year warranty on all FluidX Single Tube Readers. With a USB connection to laptop, PC or Mac, no additional power supply is needed. Data exported direct to any application Simply place your cursor where you want results to be entered and scan the tube. Data will be instantly displayed wherever the cursor is positioned. The reader will insert data into any application including Excel, Notepad, etc. * Unfortunately the Scope USB Single Tube reader is not compatible with all tablets, please contact us for further information. 6

7 Single Tube Readers for 1D and 2D Barcodes FluidX Scope TM Range USB Single Tube Reader cont. Specifications Code formats Sensor type Data Matrix, ISO 16022, Square and Rectangular Format, ECC 200, 0-20 grid sizes, White on Black and Black on White, Numeric and Alphanumeric Sensor CMOS 1.2 Megapixel (1280 x 960) gray scale Read time Less than 1 second per tube/rack (either 1D or 2D) Tube compatibility Rack compatibility Light source Dimensions Power requirements User interface Ambient operating temperature Operating humidity (non-condensing) All tubes in 24, 48, 96, 240 and 384-formats. Glass compound storage tubes, cryo tubes, biological sample tubes. FluidX Scope readers can be used with the following linear barcodes: Codabar, Code 11, Code 32, Code 39, Code 93, Code 128 Light source Red LED with Blue Targeting LED 75 x 196 x 45mm (WxDxH) USB Connection. 5vdc (ma): Typical = less than 450 ma; Idle = less than 80mA; Sleep = less than 31 ma USB 2.0 HID Keyboard -20 to 55 C ( -4 to 131 F) 10-90% Operating system Windows XP, Windows Vista, Windows 7, Windows 8, Windows CE, Mac OSX and Linux Waranty 5 years Ordering Information Catalog No Description FluidX Scope USB Single Tube Reader For Plug and Play scanning of all types of 2D Data Matrix barcoded tubes. Instant decoding of both 1D and 2D barcodes. 7

8 Single Tube Readers for 1D and 2D Barcodes FluidX Scope TM Range Wireless Single Tube Reader The FluidX Scope TM Wireless Single Tube Reader. The VERY FIRST single tube 1D and 2D barcode reader to connect with ipad and Android tablets. Plug and play, no software required. Use with all 2D barcoded tubes, any make, any size. All FluidX Single Tube Readers are compatible with any 2D Data Matrix barcoded tubes including those supplied by Greiner, Matrix, Nunc, Micronic and of course, FluidX tubes. Size does not matter, the FluidX Scope Wireless Reader will quickly scan tubes in 24, 48, 96, 240 and 384 rack formats, also larger capacity tubes including glass compound storage tubes, cryo tubes and biological sample tubes. Instant 1D and 2D barcode reading The total time between scanning a barcode and seeing the result displayed is less than a second! Tube ID is displayed instantly on the screen for identification or sample entry, or you can run the application in the background. Easy reading of linear barcodes on racks and tubes With a large scan window and superior decoding technology the Scope Wireless Single Tube Reader easily decodes 1D barcodes on racks and tubes. Use with multiple mobile devices Need to use more than one tablet with your reader? Switching between different mobile devices can be performed in just a few seconds. The Scope Wireless Single Tube Reader can be connected to your ipad, Android tablet, ipod, iphone or Android phone. Want to use a PC or laptop instead of a tablet? Scope Wireless Single Tube Reader is available with a Bluetooth modem to provide an instant connection with any laptop, PC or Mac, without installing drivers or software. Just scan the barcode found on the modem to establish connection. Data exported direct to any application Simply place your cursor where you would like the results to be entered and scan the tube. Data will be instantly displayed wherever the cursor is positioned. The reader will insert data into any application including Excel, Notepad, etc. Read barcodes anywhere, any time With this unique reader you can read 1D and 2D barcodes anywhere, at any time. Uses Bluetooth connectivity so the Scope Wireless Single Tube Reader is completely mobile. Battery powered, able to scan 50,000 tubes before recharging. Use straight away There s no need to calibrate, no drivers or software to install, before scanning your first tube or rack. Simply scan the barcode provided in the operation manual to connect the reader to your tablet. Simple to use, even with gloves Blue LED target lights are emitted so that positioning the barcode for scanning is easy, even wearing gloves. The reader then automatically scans the barcode (either 1D or 2D) and confirms a good read. Dependable decoding The team at FluidX were involved in developing the very first 2D barcoded tubes and readers, today our scanners are the result of more than 15 years of continuous development. We know our stuff! We supply a 5 year warranty on all FluidX Single Tube Readers. 8

9 Single Tube Readers for 1D and 2D Barcodes FluidX Scope TM Range Wireless Single Tube Reader cont. Specifications Ordering Information Code formats Data Matrix, ISO 16022, Square and Rectangular Format, ECC 200, 0-20 grid sizes, White on Black and Black on White, Numeric and Alphanumeric Sensor type Sensor CMOS 1.2 Megapixel (1280 x 960) gray scale Light source Read time Tube compatibility Rack compatibility Light source Red LED with Blue Targeting LED Less than 1 second per tube/rack (either 1D or 2D) All tubes in 24, 48, 96, 240 and 384-formats. Glass compound storage tubes, cryo tubes, biological sample tubes. Scope Single Tube Readers can be used with the following linear barcodes: Codabar, Code 11, Code 32, Code 39, Code 93, Code 128 Catalog No A B C Description Scope Wireless Single Tube Reader with Bluetooth. Portable single tube wireless reader with large scan window for all 2D Data Matrix labelled tubes and 1D linear barcodes. Hardware decoding with Bluetooth, no drivers or software required. Compatible with ipad / Android Tablets and PC / Mac computers with Bluetooth. Scope Wireless Single Tube Reader with Bluetooth. Supplied with tablet. Portable single tube wireless reader with large scan window for all 2D Data Matrix labelled tubes and 1D linear barcodes. Hardware decoding with Bluetooth, no drivers or software required. Supplied with 10" Lenovo Android Tablet. Scope Wireless Single Tube Reader with Bluetooth modem. Portable single tube wireless reader with large scan window for all 2D Data Matrix labelled tubes and 1D linear barcodes. Hardware decoding with Bluetooth, no drivers or software required. Bluetooth USB Modem does not require installation of drivers or software. Provides quick connection of FluidX Scope Wireless Single Tube Reader with any PC. Dimensions Power requirements User interface Ambient operating temperature Operating humidity (non-condensing) Operating system Warranty 75 x 196 x 45mm (WxDxH) Battery powered. 4.2vdc (ma): Typical and Peak = 362 ma; Idle = 80 ma; Sleep = 20 ma. Up to 50,000 scans per charge Bluetooth (Class II) HID Keyboard -20 to 55 C (-4 to 131 F) 10-90% In Wireless Bluetooth HID Mode: ios (ipad, ipod, iphone), Android OS (Tablet and Phones), Windows 8 (Mobile Edition) (Also Windows XP, Windows Vista, Windows 7, Windows 8, Windows CE, Mac OSX and Linux) With USB Bluetooth modem: Windows XP, Windows Vista, Windows 7, Windows 8, Windows CE, Mac OSX and Linux 5 years Modem for Scope Wireless Single Tube Reader Bluetooth USB modem for use with Scope Wireless Single Tube Readers when using with PC. No drivers or software required. 9

10 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Overview FluidX Impression TM Rapid Rack Scanner FluidX Impression TM Enhanced Rack Scanner FluidX Impression TM Enhanced Rack Scanner (LE) FluidX Impression TM Multi Rack Scanner For desktop use. Enhanced focal depth for dependable A high performance scanner without the The first multi-rack scanner capable of Fast identification of racked 2D barcoded scanning of any 2D barcoded tube type frills. telling you where each rack was placed. sample storage tubes. - Single Tube Reading Position (cat no A) - With Integrated Mirror Linear (cat no A) - With Integrated Mirror Linear Barcode Reader FluidX Impression TM Rapid Rack Scanner - With Opticon Linear Barcode Reader Barcode Reader Provides automatic and simultaneous scanning of rack linear barcodes. (cat no A) FluidX Impression TM Enhanced Rack Scanner (LE) - With Active Cryoprotection Enables accurate scanning of multiple - With Active Cryoprotection (cat no ) Simplifies robotic integration, ideal for racks straight from freezer. decoding more challenging (non-fluidx) linear barcodes. FluidX Impression TM Enhanced Rack Scanner (cat no B) (cat no B) - With Opticon Linear Barcode Reader Simplifies robotic integration, ideal for decoding more challenging (non-fluidx) linear barcodes. (cat no B) FluidX Impression TM Enhanced Rack Scanner - With Integrated Mirror Linear Barcode Reader - With Active Cryoprotection Enables accurate scanning of multiple racks straight from freezer. (cat no C) FluidX Impression TM Enhanced Rack Scanner - With Opticon Linear Barcode Reader - With Active Cryoprotection Accurate scanning of multiple racks straight from freezer (cat no D) 10

11 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Overview The FluidX Impression TM Range of Rack Scanners for 2D barcoded tubes are based on scanning technology and form the backbone of many sample storage and tracking systems. Opticon linear barcode reader The use of an Opticon linear barcode reader simplifies robotic integration and is ideal for decoding more challenging (non-fluidx) linear barcodes. Our Impression systems offer the best optical quality within a rapid, small footprint, scanner form. Advanced data export options and report design When used in conjunction with our new IntelliCode TM software, Impression scanners offer the most advanced data export options available and link easily to database sample tracking and LIMS systems. Compatible with MS Word templates with powerful design and formatting capabilities to create professional customised reports. Reading rack unique 2D barcode identifier FluidX racks can be supplied with a unique 2D barcode identifier. All our rack readers are able to read rack and tube 2D barcodes simultaneously to provide automatic rack orientation and additional sample security. Rack profiles save set up time When a specific rack layout is used routinely a custom rack profile can be set up. E.g. When a row remains empty within a 96 format rack, or control tubes are placed in specific positions on a regular basis. Swap between 96 and 48 format racks without making changes Once rack profiles have been set up (or using the rack profiles provided) our IntelliCode software will automatically determine which rack type is being used and select the appropriate profile for decoding and exporting tube data. Now you can switch between 96 and 48 format racks without making any changes to the reader or software. Automation friendly All FluidX rack readers have a gripper cutout section around the scan window to provide easy robotic handling of shallow racks. Mirror Linear Barcode Reader FluidX rack scanners with an integrated mirror linear barcode reader provide automatic and simultaneous scanning of rack linear barcodes. No tube feature FluidX whole rack readers are able to discriminate between a tube with a barcode that cannot be decoded and an empty rack position. The reader will not attempt to decode empty tube positions and so data files are kept clean. Reading speed is optimised as wasted data entry is avoided. 11

12 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Active Cryoprotection FluidX Active Cryoprotection System Storing biological samples at low temperature created reading challenges for traditional 2D barcoded tube rack readers. When scanning multiple racks, the accumulated amount of time that the cold racks spend in contact with the reader glass causes a drop in air temperature on the underside of the glass. The resulting condensation and frost then reduces reading ability and can cause damage to the scanning head. All FluidX 2D barcoded tubes adhere to ECC200 standards and our readers employ superior decoding algorithms, but even in these conditions unreliable reading can occur when condensation builds up as the code is obscured and the contrast between the code and the background is diminished. FluidX readers fitted with our unique Active Cryoprotection system are capable of reading multiple racks of tubes without the build-up of frost or condensation on the underside of the glass affecting decoding reliability. Unlike passive versions, an active cryoprotection system also helps to prevent damage to electronic components within the reader caused by the build up of moisture. With FluidX Active Cryoprotection System Without FluidX Active Cryoprotection System This system was introduced 4 years ago and now has a proven track record. Here s one of the first reviews we received: The new Xtr-96 (whole rack reader) with anti misting scanning window has allowed us to batch scan multiple -80 frozen racks, unlike the previous model which required scanning to be interrupted by application of a heat block to the scanning window every few racks. The ease and trouble free use has resulted in stock control and quality control being a stress free experience. Kaetan Ladhani, CJD Resource Centre, NIBSC. The FluidX Active Cryoprotection System achieves 100% decoding after reading more than 40 racks from a -20ºC freezer. Readers tested with tubes stored at -80 o C N0. of racks read before reading issues arose More than 40 racks Tube image before frosting of glass surface Tube image after frosting of glass surface 2 racks 1 rack Rack Reader with FluidX Active Cryoprotection System Non-FluidX Rack Readers 12

13 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Active Cryoprotection Readers and Scanners available with FluidX Active Cryoprotection System FluidX Impression TM Enhanced Rack Scanner FluidX Impression TM Enhanced Rack Scanner (LE) FluidX Impression TM Multi Rack Scanner FluidX Perception TM Industrial Rack Reader FluidX Perception TM SBS Rapid Rack Reader FluidX Perception TM Legacy Rapid Rack Reader 13

14 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Rapid Rack Scanner The FluidX Impression TM Rapid Rack Scanner for desktop use. For fast identification of racked 2D barcoded sample storage tubes. Use with 2D barcoded tubes in SBS format racks The Impression Rapid Rack Scanner can be used with most 2D Data Matrix barcoded tubes in an SBS footprint rack (24, 48, or 96 format) including those supplied by Greiner, Matrix, Nunc, Micronic and of course, FluidX tubes. In some instances, when the tube sits high within the rack, the Rapid Rack Scanner may not be compatible and the FluidX Impression Enhanced Rack Scanner, with greater focus depth, should be used instead. Fast 2D barcode reading The Rapid Rack Scanner will scan and decode a full rack of 96 tubes in just 4 seconds. No warm-up time is required, the Rapid Rack Scanner gets straight to work. Dependable decoding The team at FluidX were involved in developing the very first 2D barcoded tubes and readers, today our scanners are the result of more than 15 years of continuous development. We know our stuff! Easy to use with a wide range of data output options The Rapid Rack Scanner can output data to common LIMS compatible files such as text files, CSV files and Excel. With a simple and intuitive Graphical User Interface, results can be viewed directly or integrated with other applications. Output to database applications can be easily achieved via ODBC. Easily integrated The Rapid Rack Scanner features TCP/IP Winsock connectivity for remote control of reader functions for integration into robotic/liquid handling work cells. No tube feature Able to discriminate between a tube with a barcode that cannot be decoded and a rack position with no tube. The Rapid Rack Scanner will not attempt to decode empty tube positions and data files are kept clean as wasted data entry is avoided, leading to faster rack reading. Rack templates Custom templates can be set up when a specific rack layout is used routinely. E.g. When a row remains empty within a 96 format rack or control tubes are placed in specific positions on a regular basis. Automation friendly All FluidX rack readers have a gripper cutout section for easy robotic handling of shallow racks. Automatic rack orientation Always the innovators, FluidX were the first to supply a unique 2D Data Matrix barcode identifier on racks to provide automatic rack orientation. All our whole rack readers are able to read rack and tube 2D barcodes simultaneously so scan and decode time remains low. Available with attachable Opticon linear barcode reader The use of an Opticon linear barcode reader simplifies robotic integration and is ideal for decoding more challenging (non-fluidx) linear barcodes. All FluidX readers come with a 5 year warranty. 14

15 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Rapid Rack Scanner cont. Specifications Ordering Information Code formats Sensor type Light source Data Matrix, ISO 16022, Square and Rectangular Format, ECC 200, 0-20 grid sizes, White on Black and Black on White, Numeric and Alphanumeric Colour CIS (contact image sensor) (CMOS CIS) R,G,B, LED (variable light source) Catalog No A Description Rapid Rack Scanner Small whole rack scanner for racks of 48 / 96 2D datamatrix labelled tubes; small-footprint scanner based solution for rapid reading and integration. Note: The FluidX Rapid Rack Scanner has a lower depth of focus than the FluidX Enhanced Rack Scanner and is not compatible with all rack types. Read time 4 seconds (Total scan and decode time for rack of 96 tubes) B Rapid Rack Scanner with attachable Opticon Linear Barcode Reader Small whole rack scanner for racks of 48 / 96 2D datamatrix labelled tubes; small-footprint scanner based solution for rapid reading and integration. Tube compatibility Dimensions Most tubes in SBS format rack (24, 48 or 96 format). May not be compatible with tubes that sit high within the rack. 154 x 256 x 51mm (WxDxH) Note: The FluidX Rapid Rack Scanner has a lower depth of focus than the FluidX Enhanced Rack Scanner and is not compatible with all rack types. With attachable Opticon USB Linear Barcode Reader. Power requirements AC 100 to 240 V, +/-10%, less than 8 W. User interface Ambient operating temperature Operating humidity (non-condensing) FluidX GUI, including Windows TCP/IP. ODBC 5 to 55 C (41 to 131 F) 10-90% Operating system Windows XP, Windows 7 and Windows 8 Warranty 5 years 15

16 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Enhanced Rack Scanner The FluidX Impression TM Enhanced Rack Scanner With enhanced focal depth for dependable scanning of any 2D barcoded tube type, a choice of linear barcode readers and a single tube reading position. Use with 2D barcoded tubes in SBS format racks The Impression Enhanced Rack Scanner can be used with all 2D Data Matrix barcoded tubes in an SBS footprint rack (24, 48, 96, 240 or 384 format) including those supplied by Greiner, Matrix, Nunc, Micronic and, of course, FluidX tubes. No tube feature Able to discriminate between a tube with a barcode that cannot be decoded and a rack position with no tube. The Enhanced Rack Scanner will not attempt to decode empty tube positions and data files are kept clean as wasted data entry is avoided, leading to faster rack reading. Integrated single tube reader Just want to check a single tube? No need to set up another reader, simply position the tube over the single tube scanning window for instant identification. Fast 2D barcode reading The Enhanced Rack Scanner will scan and decode a full rack of 96 tubes in just 8 seconds. No warm-up time is required, the Enhanced Rack Scanner gets straight to work. Dependable decoding The team at FluidX were involved in developing the very first 2D barcoded tubes and readers, today our scanners are the result of more than 15 years of continuous development. We know our stuff! Rack templates Custom templates can be set up when a specific rack layout is used routinely. E.g. When a row remains empty within a 96 format rack, or control tubes are placed in specific positions on a regular basis. Provided with a linear barcode reader as standard Choice of two linear reader options: 1. Attachable Opticon linear barcode reader The use of an Opticon linear barcode reader simplifies robotic integration and is ideal for decoding more challenging (non-fluidx) linear barcodes. 2. Integrated mirror linear barcode reader An integrated mirror linear barcode reader provides automatic and simultaneous scanning of rack linear barcodes. Easy to use with a wide range of data output options The Enhanced Rack Scanner can output data to common LIMS compatible files such as text files, CSV files and Excel. With a simple and intuitive Graphical User Interface, results can be viewed directly or integrated with other applications. Output to database applications can be easily achieved via ODBC. Easily integrated The Enhanced Rack Scanner features TCP/IP Winsock connectivity for remote control of reader functions for integration into robotic/liquid handling work cells. Available with integrated Active Cryoprotection system The FluidX Active Cryoprotection system really works! All FluidX Rack Scanners fitted with our Cryoprotection system achieve 100% decoding after reading more than 40 racks straight from a -20ºC freezer! Automatic rack orientation Always the innovators, FluidX were the first to supply a unique 2D Data Matrix barcode identifier on racks to provide automatic rack orientation. All our rack scanners are able to read rack and tube 2D barcodes simultaneously so scan and decode time remains low. Automation friendly All FluidX whole rack scanners have a gripper cutout section for easy robotic handling of shallow racks. All FluidX readers come with a 5 year warranty. 16

17 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Enhanced Rack Scanner cont. Specifications Ordering Information Code formats Sensor type Light source Read time Tube compatibility Dimensions Weight Data Matrix, ISO 16022, Square and Rectangular Format, ECC 200, 0-20 grid sizes, White on Black and Black on White, Numeric and Alphanumeric CCD image sensor CCFL (cold cathode fluorescent light source) 8 seconds (Total scan and decode time for rack of 96 tubes) All 2D Data Matrix labelled tubes in SBS footprint racks. (24, 48, 96, 240 and 384 formats) Includes glass compound storage tubes, cryo tubes, biological sample tubes. 175 x 291 x 71mm (WxDxH) 0.5kg Power requirements AC 100 to 240 V, +/-10%, less than 8 W. User interface Cable Interface FluidX GUI, including Windows TCP/IP. ODBC USB 2.0/ USB 1.1, USB type B Operating system Windows XP, Windows 7 and Windows 8 Warranty 5 years Catalog No A B C D Description Enhanced Optic Rack Scanner with Integrated Mirror Linear Barcode Reader Compact whole rack scanner for all types of 2D Data Matrix labelled tubes in SBS footprint racks. Compatible with 24, 48, 96, 240, and 384 format racked tubes. Suitable for integration into larger systems. With integrated mirror linear barcode reader for use with tubes and racks. Single tube reading position. Enhanced Optic Rack Scanner with Opticon Linear Barcode Reader attachment Compact whole rack scanner for all types of 2D Data Matrix labelled tubes in SBS footprint racks. Compatible with 24, 48, 96, 240, and 384 format racked tubes. Suitable for integration into larger systems. With attachable Opticon USB Linear Barcode Reader. Single tube reading position. Enhanced Optic Rack Scanner with Integrated mirror Linear Barcode Reader and Active Cryoprotection Compact whole rack scanner for all types of 2D Data Matrix labelled tubes in SBS footprint racks. Compatible 24, 48, 96, 240, and 384 format racked tubes. Suitable for integration into larger systems With integrated mirror linear barcode reader for use with tubes and racks. Active Cryoprotection system. Single tube reading position. Enhanced Optic Rack Scanner with Integrated Linear Barcode Reader, Active Cryoprotection and Opticon Linear Barcode Reader attachment Compact whole rack scanner for all types of 2D Data Matrix labelled tubes in SBS footprint racks. Compatible with 24, 48, 96, 240, and 384 format racked tubes. Suitable for integration into larger systems. With attachable Opticon USB Linear Barcode Reader. Active Cryoprotection system. With FluidX Active Cryoprotection system Without FluidX Active Cryoprotection system Mirror linear barcode reader Attachable Opticon linear barcode reader 17

18 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Enhanced Rack Scanner (LE) The FluidX Impression TM Enhanced Rack Scanner (LE) For dependable barcode reading at a reduced cost. A high performance scanner without the frills. With enhanced focal depth for dependable scanning of any 2D barcoded tube type, this reader is a stripped-down version of the Enhanced Rack Scanner for those who simply want a good, whole rack 2D tube reader at a reduced cost. Use with 2D barcoded tubes in SBS format racks The Impression Enhanced Rack Scanner (LE) can be used with all 2D Data Matrix barcoded tubes in an SBS footprint rack (24, 48, or 96 format) including those supplied by Greiner, Matrix, Nunc, Micronic and of course, FluidX tubes. Fast 2D barcode reading The Enhanced Rack Scanner (LE) will scan and decode a full rack of 96 tubes in just 8 seconds. No warm-up time is required, the Enhanced Rack Scanner (LE) gets straight to work. No tube feature Able to discriminate between a tube with a barcode that cannot be decoded and a rack position with no tube. The Enhanced Rack Scanner (LE) will not attempt to decode empty tube positions and data files are kept clean. This leads to faster rack reading as wasted data entry is avoided. Rack templates Custom templates can be set up when a specific rack layout is used routinely. E.g. When a row remains empty within a 96 format rack, or control tubes are placed in specific positions on a regular basis. Available with integrated Active Cryoprotection system The FluidX Active Cryoprotection system really works! All FluidX Rack Scanners fitted with our Active Cryoprotection system achieve 100% decoding after reading more than 40 racks straight from a -20ºC freezer! Dependable decoding The team at FluidX were involved in developing the very first 2D barcoded tubes and readers, today our scanners are the result of more than 15 years of continuous development. We know our stuff! All FluidX scanners come with a 5 year warranty. Easy to use with a wide range of data output options The Enhanced Rack Scanner can output data to common LIMS compatible files such as text files and CSV files. With a simple and intuitive Graphical User Interface, results can be viewed directly or with other applications such as Excel and Notepad. 18

19 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Enhanced Rack Scanner (LE) cont. Specifications Ordering Information Code formats Sensor type Data Matrix, ISO 16022, Square and Rectangular Format, ECC 200, 0-20 grid sizes, White on Black and Black on White, Numeric and Alphanumeric CCD image sensor Catalog No A Description Enhanced Optic Rack Scanner (LE) Limited Edition, compact, whole rack scanner for all 2D Data Matrix labelled tubes in SBS footprint racks. Fast reading on the bench top. Light source Read time CCFL (cold cathode fluorescent light source) 8 seconds (Total scan and decode time for rack of 96 tubes) C Enhanced Optic Rack Scanner (LE) with Active Cryoprotection Limited Edition, compact, whole rack scanner for all 2D Data Matrix labelled tubes in SBS footprint racks. Fast reading on the bench top. With Active Cryoprotection system. Tube compatibility All 2D Data Matrix labelled tubes in SBS footprint racks. (24, 48, or 96 formats) Includes glass compound storage tubes, cryo tubes, biological sample tubes. Dimensions 175 x 291 x 71mm (WxDxH) Weight 0.5kg Power requirements AC 100 to 240 V, +/-10%, less than 8 W. User interface Cable Interface FluidX GUI USB 2.0/ USB 1.1, USB type B Operating system Windows XP, Windows 7 and Windows 8 Warranty 5 years 19

20 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Multi Rack Scanner The FluidX Impression TM Multi Rack Scanner The first multi-rack scanner capable of telling you where each rack was placed. Use with 2D barcoded tubes in SBS format racks The Impression Multi Rack Scanner can be used with all 2D Data Matrix barcoded tubes in an SBS footprint rack (24, 48, 96, 240 or 384 format) including those supplied by Greiner, Matrix, Nunc, Micronic and of course, FluidX tubes. Fast 2D barcode reading Scan and decode time is just 10 seconds per rack. Dependable decoding The team at FluidX were involved in developing the very first 2D barcoded tubes and readers, today our scanners are the result of more than 15 years of continuous development. We know our stuff! Easy to use with a wide range of data output options The Impression Multi Rack Scanner can output data to common LIMS compatible files such as text files, CSV files and Excel. With a simple and intuitive Graphical User Interface, results can be viewed directly or integrated with other applications. Output to database applications can be easily achieved via ODBC. Easily integrated The Impression Multi Rack Scanner features TCP/IP Winsock connectivity for remote control of reader functions for integration into robotic/liquid handling work cells. No tube feature Able to discriminate between a tube with a barcode that cannot be decoded and a rack position with no tube. The Impression Multi Rack Scanner will not attempt to decode empty tube positions and data files are kept clean as wasted data entry is avoided, leading to faster rack reading. Rack templates Custom templates can be set up when a specific rack layout is used routinely. E.g. When a row remains empty within a 96 format rack, or control tubes are placed in specific positions on a regular basis. With integrated mirror linear barcode reader for each rack The Impression Multi Rack Scanner is fitted with linear mirror barcode readers at each rack position for simultanous tube and rack identification. Available with integrated Active Cryoprotection system The FluidX Active Cryoprotection system really works! All FluidX Whole Rack Scanners fitted with our Active Cryoprotection system achieve 100% decoding after reading more than 40 racks straight from a -20ºC freezer! Automatic rack orientation Always the innovators, FluidX were the first to supply a unique 2D Data Matrix barcode identifier on racks to provide automatic rack orientation. All our whole rack readers are able to read rack and tube 2D barcodes simultaneously so scan and decode time remains low. All FluidX scanners come with a 5 year warranty. 20

21 Whole Rack 1D & 2D Barcode Scanners FluidX Impression TM Range Multi Rack Scanner cont. Specifications Code formats Sensor type Light source Read time Data Matrix, ISO 16022, Square and Rectangular Format, ECC 200, 0-20 grid sizes, White on Black and Black on White, Numeric and Alphanumeric CCD image sensor R,G,B, LED (variable light source) 8 seconds (Total scan and decode time for rack of 96 tubes) Ordering Information Catalog No Description Impression Multi Rack Scanner with Integrated mirror Linear Barcode Readers and Active Cryoprotection Expanded scanner capable of the simultaneous reading of 4 racks of 2D barcoded tubes. Compatible with all SBS footprint racks, (24, 48 or 96 formats). Integrated linear barcode readers at each rack position scan the 4 rack codes at the same time as 2D barcodes are being read. With Active Cryoprotection system. Tube compatibility Dimensions All 2D Data Matrix labelled tubes in SBS footprint racks. (24, 48 or 96 formats) Includes glass compound storage tubes, cryo tubes, biological sample tubes. 154 x 256 x 51mm (WxDxH) Power requirements AC 100 to 240 V, +/-10%, less than 8 W. User interface Cable Interface Ambient operating temperature Operating humidity (non-condensing) FluidX GUI, including Windows TCP/IP. ODBC USB 2.0/ USB 1.1, USB type B -20 to 55 C (-4 to 131 F) 10-90% Operating system Windows XP, Windows 7 and Windows 8 Warranty 5 years 21

22 Whole Rack 1D & 2D Barcode Scanners FluidX Perception TM Range Overview FluidX Perception TM Industrial Rack Reader For industrial automation, especially at low temperatures. - With Integrated USB Linear Barcode Reader Automatic and simultaneous scanning of rack 1D barcodes. - With Active Cryoprotection Enables accurate scanning of multiple racks straight from freezer. (cat no C) FluidX Perception TM Industrial Rack Reader - With Integrated USB Linear Barcode Reader - With Active Cryoprotection - With Enhanced Contrast Lighting System Makes light work of hard to read, low contrast 2D barcodes. FluidX Perception TM Rapid Rack Reader for SBS Format Racks Fast, small and needs only USB cable for data transfer and power. - With Active Cryoprotection Enables accurate scanning of multiple racks straight from freezer. (cat no A) FluidX Perception TM Rapid SBS Rack Reader for SBS Format Racks Fast, small and needs only USB cable for data transfer and power. - With Active Cryoprotection - With Integrated USB Linear Barcode Reader Automatic and simultaneous scanning of rack 1D barcodes. (cat no B) FluidX Perception TM Rapid Legacy Rack Reader for Both Legacy Racks and SBS Format Racks - With Active Cryoprotection Enables accurate scanning of multiple racks straight from freezer. (cat no A) FluidX Perception TM Rapid Legacy Rack Reader for Both Legacy Racks and SBS Format Racks - With Active Cryoprotection - With Integrated USB Linear Barcode Reader Automatic and simultaneous scanning of rack 1D barcodes. (cat no B) (cat no B) 22

23 Whole Rack 1D & 2D Barcode Readers FluidX Perception TM Range Overview FluidX Perception TM rack readers Using advanced camera-based systems, these readers are ideal for more challenging situations such as integration into robotic systems, cold enviroments or simply when speed and size are important. Rack profiles save set up time When a specific rack layout is used routinely a custom rack profile can be set up. E.g. When a row remains empty within a 96 format rack, or control tubes are placed in specific positions on a regular basis. Requires only a single USB connection Perception rack readers (except Industrial model) require only a single USB connection to your PC or laptop. No additional power cable (or dongle) is required, so they re simple to install and maintain. Advanced data export options and report design When used in conjunction with our new IntelliCode TM software, Perception readers offer the most advanced data export options available, linking easily to database sample tracking and LIMS systems. Compatible with MS Word templates with powerful design and formatting capabilities to create professional customised reports. Read rack 2D barcode identifier FluidX racks can be supplied with a unique 2D barcode identifier. All our rack readers are able to read rack and tube 2D barcodes simultaneously to provide automatic rack orientation and additional sample security. Swap between 96 and 48 format racks without making any changes Once rack profiles have been set up (or using the rack profiles that are provided) our IntelliCode software will automatically determine which rack type is being used and select the appropriate profile for decoding and exporting tube data. Now you can switch between 96 and 48 format racks without making any changes to the reader or software. Automation friendly All FluidX rack readers have a gripper cutout section around the scan window to enable easy robotic handling of shallow racks. The Perception Rapid Rack Reader for SBS format racks has the smallest footprint of any reader available, barely larger than a SBS format rack, for greater compatibility with automated systems including liquid handling. Linear barcode reader The optional linear barcode reader helps to simplify robotic integration, is ideal for decoding more challenging (non-fluidx) linear barcodes and provides rack orientation. Plugs directly into the Perception reader so only one USB connection to a PC or laptop is required. No tube feature FluidX whole rack readers are able to discriminate between a tube with a barcode that cannot be decoded and an empty rack position. The reader will not attempt to decode empty tube positions and so data files are kept clean. Reading speed is optimised as wasted data entry is avoided. 23

24 Whole Rack 1D & 2D Barcode Readers FluidX Perception TM Range Industrial Rack Reader The FluidX Perception TM Industrial Whole Rack Reader The only choice for industrial automation, especially at low temperatures. Proven track record. Use with 2D barcoded tubes in SBS format racks The Perception Industrial Rack Reader can be used with all 2D Data Matrix barcoded tubes in an SBS footprint rack (24, 48, 96 format) including those supplied by Greiner, Matrix, Nunc, Micronic and of course, FluidX tubes. Completely sealed, ideal for cold storage conditions The Perception Industrial Rack Reader is contained within a sealed housing which is impervious to water, dust and gases (IP65 rated) and offers reliable decoding at low temperatures (to -40 o C). Fast 2D barcode reading 4 seconds total scan and decode time for a complete rack of 96 tubes! The Perception Industrial Rack Reader uses eight CCD cameras to achieve an almost instant read. Automatic rack orientation Always the innovators, FluidX were the first to supply a unique 2D Data Matrix barcode identifier on racks to provide automatic rack orientation. All our rack readers are able to read rack and tube 2D barcodes simultaneously so scan and decode time remains low. No tube feature Able to discriminate between a tube with a barcode that cannot be decoded and a rack position with no tube. The Industrial Rack Reader will not attempt to decode empty tube positions and data files are kept clean as wasted data entry is avoided, leading to faster rack reading. Easy to use with a wide variety of data capture options. With a simple and intuitive Graphical User Interface, results can be viewed directly or integrated with other applications. With ODBC connectivity for database integration. The Perception Industrial Rack Reader can output data to common LIMS compatible files such as text files, CSV files and Excel. Dependable decoding The team at FluidX were involved in developing the very first 2D barcoded tubes and readers, today our scanners are the result of more than 15 years of continuous development. We know our stuff! Automation friendly, easily integrated The Perception Industrial Rack Reader features TCP/IP Winsock connectivity for remote control of reader functions for integration into robotic/liquid handling work cells. All FluidX rack readers have a gripper cutout section for easy robotic handling of shallow racks. Rack templates Custom templates can be set up when a specific rack layout is used routinely. E.g. When a row remains empty within a 96 format rack, or control tubes are placed in specific positions on a regular basis. With integrated linear barcode reader An integrated USB linear barcode reader provides automatic and simultaneous scanning of rack 1D barcodes. With integrated Active Cryoprotection system The FluidX Active Cryoprotection system really works! All FluidX Rack Readers fitted with our Active Cryoprotection system achieve 100% decoding after reading more than 40 racks straight from a -20ºC freezer! Available with Contrast Enhancing REMP Lighting System Makes light work of hard to read, low contrast 2D barcodes. All FluidX readers come with a 5 year warranty. 24