I.V. Administration Extension Sets / Gravity Administration Sets

Transcription

1 I.V. Administration Extension Sets / Gravity Administration Sets EXTENSION SETS WITHOUT FILTER GRAVITY ADMINISTRATION SETS WITH FILTER Extension Set with Removable CLAVE EMCMC2002-R 7" Extension Set with Removable CLAVE 50/cs N/A GRAVITY ADMINISTRATION SETS WITH FILTER Venoset Piggyback Primary Set with Filter With convertible pin, 0.2 micron filter, CAIR clamp, slide clamp, Y-type automatic backcheck valve at 66" and Y-site 6" from Option-Lok. AB " (203 cm) " 48/cs ADDitIV Primary Filtered Administration Set, B-Series Set (15 Drops/mL) Primary Administration Set with 1.2 Micron Filter With universal spike, 20 drops/ml, Y injection site at distal end, roller clamp, rotating luer lock and 1.2 micron air-eliminating filter. MS717P 108" 50/cs Primary Administration Sets with 0.22 Micron Filter MGV1785F 0.2 micron filter with 3 injection sites, backcheck valve, and SPIN-LOCK connector. DEHP-free. Priming Volume: 25mL, Length: 104" (264.2 cm) 50/cs N/A Continu-Flo Solution Sets with 0.22 Air-Eliminating Filter Minidrip Continu-Flo Solution Set With 0.22 micron high pressure extended life filter and 2 Interlink injection sites 6" and 84" from male luer lock adapter. Order # Approx. Drops (ml) Length UOM HCPCS TR2C " (2.7 m) 48/cs N/A With universal spike, 60 drops/ml, proximal Y injection site, distal Y injection site, roller clamp, rotating luer lock and 0.22 micron air-eliminating filter. MS711P 108" 50/cs With universal spike, 20 drops/ml, Y injection site at distal end, roller clamp, rotating luer lock and 0.22 micron air-eliminating filter. MS716P 108" 50/cs Continu-Flo Solution Set With 0.22 downstream high pressure extended life filter and 2 Interlink injection sites 6" and 84" from male luer lock adapter. Order # Approx. Drops (ml) Length UOM HCPCS TR2C " (2.6 m) 48/cs N/A I.V. Administration Primary Filter Set TR2C Injection Sites, 0.22 Micron High Pressure, 105" Continu-Flo 48/cs With universal spike, 20 drops per ml, Y injection site at distal end, rotating luer lock, 0.22 micron air-eliminating filter, slide clamp below filter and roller clamp above filter. MS728 92" 50/cs 105

2 MGV1446 Universal spike, backcheck valve, injection sites 70" and 8" above distal end, roller clamp, SPIN-LOCK connector. Priming Volume: 18mL, Length: 94" (238.8 cm) 50/cs N/A Primary Administration Sets With universal spike, 20 drops/ml, roller clamp and rotating luer lock. MS703P 82" 25/cs MGV1464 B-Series Set, nonvented spike, backcheck valve, injection sites 60" and 8" above distal end, roller clamp, flashbulb, male luer slip connector. Priming Volume: 16mL, Length: 86" (218.4 cm) 50/cs N/A With universal spike, 20 drops/ml, Y injection site at distal end, roller clamp and rotating luer lock. MS701PG 81" 25/cs MGV1485 B-Series Set, Universal spike, backcheck valve, injection sites 82" and 6" above distal end, roller clamp, slide clamp, SPIN-LOCK connector. With universal spike, 20 drops/ml, Y injection site at distal end, roller clamp and rotating luer lock. MS719P 103" 50/cs ADDitIV Primary Administration Sets with Backcheck Valve, (15 Drops/mL), Latex-free MGV1443 Universal spike, backcheck valve, injection sites 60" and 6" above distal end, roller clamp, SPIN-LOCK connector. Priming Volume: 17mL, Length: 84" (213.4 cm) 50/cs N/A MGV Universal spike, backcheck valve, injection sites 97", 43" and 35" above distal end, roller clamp, slide clamp, SPIN-LOCK connector. Latex-free. Priming Volume: 23mL, Length: 119 in. (302.3 cm) 50/cs N/A Basic I.V. Administration Sets (15 Drops/mL) MGV1400 B-Series Set, nonvented spike, roller clamp, slide clamp, and SPIN-LOCK connector. Latex-free. Priming Volume: 12mL, Length: 67" (170.2 cm) 50/cs N/A MGV1402 B-Series Set, Universal spike, roller clamp, slide clamp, and SPIN-LOCK connector. Latex-free. Priming Volume: 14mL, Length: 79" (200.7 cm) 50/cs N/A MGV1415 With One Injection Site, Universal spike, roller clamp, slide clamp, injection site 26" above distal end, SPIN-LOCK connector. Latex-free. Priming Volume: 16mL, Length: 93" (236.2 cm) 50/cs N/A 106

3 Basic I.V. Administration Sets (15 Drops/mL) MGV1416 With One Injection Site, B-Series Set, Universal spike, roller clamp, slide clamp, injection site 6" above distal end, SPIN-LOCK connector. Latex-free. Priming Volume: 14mL, Length: 73" (185.0 cm) 50/cs N/A MGV1418 With One Injection Site, Universal spike, roller clamp, injection site 6" above distal end, SPIN-LOCK connector. Latex-free. Priming Volume: 15mL, Length: 73" (185.0 cm) 50/cs N/A MGV B-Series Set with Two Injection Sites, Universal spike, roller clamp, slide clamp, injection sites 28" and 6" above distal end, SPIN-LOCK connector. Latex-free. Priming Volume: 17mL, Length: 84" (213.4 cm) 50/cs N/A MGV1483 With One Injection Site, nonvented spike, roller clamp, slide clamp, injection site 26" above distal end, SPIN-LOCK connector. Latex-free. Priming Volume: 19mL, Length: 93" (236.2cm) 50/cs N/A MGV1495 B-Series Set, nonvented spike, roller clamp, slide clamp, and SPIN-LOCK connector. Latex-free. Priming Volume: 16mL, Length: 89" (226.1 cm) 50/cs N/A Mini-Drop Basic Administration Set, (60 Drops/mL) MGV1425 B-Series Set, nonvented spike, roller clamp, flashbulb, male luer slip connector. Priming Volume: 13mL, Length: 68" (172.8 cm) 50/cs N/A MGV1421 With Two Injection Sites, nonvented spike, roller clamp, injection sites 28" and 6" above distal end, flashbulb, male luer slip connector. Latex-free. Priming Volume: 17mL, Length: 85" (215.9 cm) 50/cs N/A Secondary Administration Sets for use with ADDitIV Primary Administration Sets (15 Drops/mL) MGV1422 B-Series Set with Two Injection Sites, Universal spike, roller clamp, slide clamp, injection sites 28" and 6" above distal end, SPIN-LOCK connector. Latex-free. MGV1903 Nonvented spike, roller clamp, 19G thinwall needle, with bag hanger. Latex-free. Priming Volume: 9mL, Length: 41" (104.1 cm) 50/cs N/A MGV1423 B-Series Set with Two Injection Sites, nonvented spike, slide clamp, roller clamp, injection sites 82" and 6" above distal end, SPIN-LOCK connector. Latex-free. MGV1912 Vented spike, roller clamp, 19G thinwall needle, with bag hanger. Latex-free. Priming Volume: 9mL, Length: 42" (106.7 cm) 50/cs N/A MGV1482 B-Series Set with One Injection Site, Universal spike, roller clamp, slide clamp, injection site 26" above distal end, SPIN-LOCK connector. Latex-free. MGV Nonvented spike, roller clamp, SPIN-LOCK connector, unattached 19G Thinwall Protected Needle, with bag hanger. Latex-free. Priming Volume: 9mL, Length: 40" (101.6 cm) 50/cs N/A 107

4 LifeShield Primary Set With convertible pin, CAIR clamp, slide clamp and prepierced Y-site 6" from Option-Lok. AB " (198 cm) " 48/cs SoluSet 250 x 15 Set Macro drop precision volume set with vented pin, CAIR clamp and 4 slide clamps. Includes 250mL calibrated SoluSet diaphragm with automatic shutoff valve, and Y-site 6" from male adapter. AB " (196 cm) "/0.100" 20/cs LifeShield Primary Piggyback Set With convertible pin, inline backcheck valve, 2 CLAVE Y-sites, slide clamp, CAIR clamp and Option-Lok. Latex-free. AB " (254 cm) " 48/cs Venoset Microdrip Primary Set Precision drop I.V. set with convertible pin, CAIR clamp, slide clamp, and Y- site 6" from male adapter. AB " (178 cm) " 48/cs LifeShield Microdrip Piggyback Set With convertible pin, inline backcheck valve, CAIR clamp, slide clamp, 2 CLAVE Y-sites and Option-Lok. AB " (254 cm) " 48/cs Venoset Primary Set With nonvented pin, CAIR clamp, slide clamp and 2 Y-sites 6" and 39" from male adapter. Retrograde volume = 4.2mL. AB " (254 cm) " 48/cs LifeShield Primary Piggyback Set With convertible pin, CAIR clamp, 2 slide clamps, inline backcheck valve, 3 CLAVE Y-sites and Option-Lok. Latex-Free. AB " (254 cm) " 48/cs Venoset Piggyback Primary Sets without Filter With nonvented pin, CAIR clamp, slide clamp, Y-type automatic backcheck valve at 63", and Y-site 6" from male adapter. AB " (198 cm) " 48/cs Primary Piggyback Set With nonvented pin, CAIR clamp, slide clamp, Y-type automatic backcheck valve, 2 Y-sites and male adapter. AB " (254 cm) " 48/cs With convertible pin, CAIR slide clamp, Y-type automatic backcheck valve at 66" and Y-site 6" from male adapter. AB " (203 cm) " 48/cs 108

5 Venoset Piggyback Primary Sets without Filter, cont d. With nonconverted pin, CAIR clamp, 2 slide clamps, Y-type automatic backcheck valve at 91" and 2 Y-sites 50" and 6" from Option-Lok. Retrograde volume = 5.5mL. AB " (269 cm) " 48/cs Venoset Secondary Set With vented pin, slide clamp for series hookup or transfer use. Latex-free. AB " (56 cm) " 48/cs Venoset Piggyback Secondary Set For use with primary set. Includes drip chamber, with convertible pin, slide clamp and 19G thinwall needle. Plastic hanger included. Latex-free. AB " (81 cm) " 48/cs Venoset Twin-Site Primary Set With nonvented pin, CAIR clamp, 2 slide clamps, and 2 Y-sites at 6" and 39" from male adapter. Retrograde volume = 4.2mL. AB " (254 cm) " 48/cs I.V. Administration Sets I.V. Administration Primary Sets (10 drops/ml) TR2C Injection Site, Nonvented Pin, 68", Male Luer Lock 48/cs TR2C Injection Site, Nonvented Pin, 68" 48/cs TR2C Injection Site, Duo-Vented Pin, 68" 48/cs TR2C Injection Site, Duo-Vented Pin, 92" 48/cs TR2C Injection Sites, Nonvented Pin, 97", Male Luer Slip 48/cs TR2C Injection Sites, Nonvented Pin, 97", Male Luer Lock 48/cs TR2C Injection Sites, Nonvented Pin, 81", Continu-Flo 48/cs TR2C Injection Sites, Nonvented Pin, 85", Male Luer Slip 48/cs TR2C Injection Sites, Nonvented Pin, 89", Continu-Flo 48/cs TR2C Injection Sites, Duo-Vented Pin, 105", Continu-Flo 48/cs TR2C Injection Sites, Nonvented Pin, 105", Continu-Flo 48/cs TR2C Injection Sites, Nonvented Pin, 95", Continu-Flo 48/cs I.V. Administration Minidrip Solution Sets (60 drops/ml) TR2C Injection Site, Nonvented Pin, 68", Male Luer Slip 48/cs TR2C Injection Sites, Nonvented Pin, 85", Male Luer Slip 48/cs Solution Sets With Male Luer Lock Adapter. Sterile Package. Order # Drops per ml Length UOM HCPCS TR1C " (1.8 m) 48/cs N/A Venoset Secondary Piggyback Sets For use with primary piggyback set. Features nonvented pin, drip chamber, slide clamp and detached 19G thinwall needle. Plastic hanger included. Latex-free. AB " (81 cm) " 48/cs With Male Luer Lock Adapter. Order # Drops per ml Length UOM HCPCS TR1C " (2.6 m) 48/cs N/A For use with primary piggyback set. Features convertible piercing pin, CAIR clamp and detached 19G thinwall needle. Plastic hanger included. Latex-free. AB " (81 cm) " 48/cs I.V. Fat Emulsion Administration Set I.V. Fat Emulsion Administration Set with Vented Spike (Approx. 10 drops/ml) HCPCS TR2C " (200 cm) 48/cs N/A 109

6 / I.V. Accessories I.V. ACCESSORIES FLOW REGULATORS Vented Nitroglycerin Set With polyethylene lined tubing, 12" PVC pump segment, 1 Interlink injection site 6" from male Luer lock adapter. Order # Approx. Volume (ml) Length UOM HCPCS TR2C mL 106" (2.7 m) 48/cs N/A Vented Nitroglycerin Set With PVC tubing segment and one injection site 6" from male Luer lock adapter. For use with Colleauge and Flo-Gard 6200 and 6300 series Volumetric Infusion Pumps. TR2C Injection Site, Nitroglycerin Vented Pin, 105" 48/cs MISCELLANEOUS Metriset Measured Volume Solution Administration Sets, (60 Drops/mL) Mini-Drop with Float Valve Automatic Shutoff MGV1429M Non-vented spike, roller clamp, 150mL burette chamber, roller clamp, injection site 6" above distal end, SPIN-LOCK connector. Latex-free Priming Volume: 15mL, Length: 87" (221.0 cm) 20/cs N/A Mini-Drop without Automatic Shutoff MG1432M Non-vented spike, roller clamp, 150mL burette chamber, roller clamp, injection sites 26" and 6" above distal end, slide clamp, SPIN-LOCK connector. Latex-free. Priming Volume: 18mL, Length: 109" (276.9 cm) 20/cs N/A Piggyback Administration Set Mini-Drop without Automatic Shutoff MGV1739M Non-vented spike, roller clamp, 150mL burette chamber roller clamp, Filterflow 0.2µ air-eliminating filter, injection sites 86" and 6" above distal end, SPIN-LOCK connector. Latex-free. Priming Volume: 20mL, Length: 112" (284.5 cm) 20/cs N/A With universal spike, 20 drops/ml, proximal Y injection site and backcheck valve, distal Y injection site, roller clamp and rotating luer lock. MS720P 92" 25/cs Extension Set with Rate Flow Regulator Female luer connector, injection site 6 in. above distal end, SPIN-LOCK connector. Latex-free. MGV5200 Priming Volume: 2.5mL, Length: 19" (48.3 cm) 50/cs N/A Blood Administration Extension Set With slide clamp and male adapter for making a flexible connection between syringe and needle or as an extension where added length is needed. Latexfree. Sterile pack. Order # Length Priming Capacity Tubing ID UOM AB " (51 cm) " 120/cs Adult I.V. Set with Rate Flow Regulator, (20 Drops/mL) Universal spike with 15µ filter, on/off clamp, Rate Flow Regulator, injection site 6" above distal end, SPIN-LOCK connector. Latex-free. MGV5922 Priming Volume: 14mL, Length: 84" (213.4 cm) 50/cs N/A 110