Virtual Connect Enterprise Manager Server Guide

Transcription

1 May 2016 Virtual Connect Enterprise Manager Server Guide Supporting Network Advisor

2 Copyright 2016 Brocade Communications Systems, Inc. All Rights Reserved. ADX, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric OS, HyperEdge, ICX, MLX, MyBrocade, OpenScript, The Effortless Network, VCS, VDX, Vplane, and Vyatta are registered trademarks, and Fabric Vision and vadx are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names mentioned may be trademarks of others. Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade sales office for information on feature and product availability. Export of technical data contained in this document may require an export license from the United States government. The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the accuracy of this document or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that accompany it. The product described by this document may contain open source software covered by the GNU General Public License or other open source license agreements. To find out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, and obtain a copy of the programming source code, please visit Brocade Communications Systems, Incorporated Corporate and Latin American Headquarters Brocade Communications Systems, Inc. 130 Holger Way San Jose, CA Tel: Fax: info@brocade.com European Headquarters Brocade Communications Switzerland Sàrl Centre Swissair Tour B - 4ème étage 29, Route de l'aéroport Case Postale 105 CH-1215 Genève 15 Switzerland Tel: Fax: emea-info@brocade.com Asia-Pacific Headquarters Brocade Communications Systems China HK, Ltd. No. 1 Guanghua Road Chao Yang District Units 2718 and 2818 Beijing , China Tel: Fax: china-info@brocade.com Asia-Pacific Headquarters Brocade Communications Systems Co., Ltd. (Shenzhen WFOE) Citic Plaza No. 233 Tian He Road North Unit th Floor Guangzhou, China Tel: Fax: china-info@brocade.com Document History Title Publication number Summary of changes Date Virtual Connect Enterprise Manager Server Guide Update for January 2016 Virtual Connect Enterprise Manager Server Guide Update for May of 9 Virtual Connect Enterprise Manager Server Guide

3 Virtual Connect Enterprise Manager server discovery The Management application enables you to discover Virtual Connect Enterprise Manager (VCEM) servers. Beginning with Brocade Network Advisor release, VCEM server version is supported. You must use pre-12.4.x releases to run VCEM server versions 6.2 or 7.1. You can discover up to 2 VCEM servers. VCEM is not supported on Professional and Professional Plus licenses of the Brocade Network Advisor. You cannot discover VCEM servers from an IBM Network Advisor. VCEM Server discovery of HP Network Advisor is not supported on the Professional Plus Edition (PPE). VCEM server discovery of HP Network Advisor is supported only on the Enterprise Edition (EE). Discovering a VCEM server To discover a VCEM server, complete the following steps. 1. Select Discover > VCEM Server. FIGURE 1 Discover VCEM Servers dialog box Virtual Connect Enterprise Manager Server Guide 3 of 9

4 2. Click Add. The Add VCEM Server dialog box displays. FIGURE 2 Add VCEM Server dialog box 3. Enter the IPv4 IP address or fully qualified domain name in the Network Address field. 4. Enter the VCEM server SOAP API port number (default is 50001) in the Port field. 5. Enter the VCEM server user name in the User ID field. 6. Enter the VCEM server password Password field. 7. Click OK on the Add VCEM Server dialog box. If an error occurs, a message displays. Click OK to close the error message and fix the problem. A VCEM server displays in Discovered VCEM Servers table with pending status. To update the status from pending, click Refresh or you must close and reopen the Discover VCEM Servers dialog box. 8. Click Close on the Discover VCEM Servers dialog box. Editing a VCEM server To edit VCEM server discovery, complete the following steps. 2. Select the VCEM server in the Discovered VCEM Servers list and click Edit. The Edit VCEM Server dialog box displays. FIGURE 3 Edit VCEM Server dialog box 3. Change the IPv4 IP address or fully qualified domain name in the Network Address field. 4. Change the VCEM server SOAP API port number in the Port field. 5. Enter the VCEM server user name in the User ID field. 4 of 9 Virtual Connect Enterprise Manager Server Guide

5 6. Enter the VCEM server user password Password field. 7. Click OK on the Edit VCEM Server dialog box. If an error occurs, a message displays. Click OK to close the error message and fix the problem. 8. Click Close on the Discover VCEM Servers dialog box. Removing a VCEM server from active discovery If you decide you no longer want the Management application to discover and monitor a specific VCEM server, you can delete it from active discovery. To delete a VCEM server from active discovery, complete the following steps. 2. Select the VCEM server you want to delete from active discovery in the Discovered VCEM Servers table. 3. Click Delete. The deleted VCEM server displays in the Previously Discovered Addresses table. 4. Click Close on the Discover VCEM Servers dialog box. Rediscovering a previously discovered VCEM server To return a VCEM server to active discovery, complete the following steps. 2. Select the VCEM server you want to return to active discovery in the Previously Discovered Addresses table. 3. Click Discover. The rediscovered VCEM server displays in the Discovered VCEM Servers table. 4. Click Close on the Discover VCEM Servers dialog box. Deleting a VCEM server from discovery To delete a VCEM server permanently from discovery, complete the following steps. 2. Select one or more VCEM servers you want to delete permanently from discovery in the Previously Discovered Addresses table. 3. Click Delete. 4. Click Close on the Discover VCEM Servers dialog box. Viewing the VCEM server discovery state The Management application enables you to view device discovery status through the Discover VCEM Servers dialog box. Virtual Connect Enterprise Manager Server Guide 5 of 9

6 To view the discovery status of a device, complete the following steps. 2. Right-click the VCEM server node select Expand All to show all devices. The Discovery Status field details the actual status message text, which varies depending on the situation. The following are samples of actual status messages: Active Login Failed Failed Discovery Pending Delete Pending Troubleshooting VCEM server discovery If you encounter discovery problems, complete the following checklist to ensure that discovery was set up correctly. 1. Verify IP connectivity by issuing a ping command to the server. a. Open the command prompt. b. From the Server, type ping Device_IP_Address. 2. Enter the IP address with the SOAP API port number, using https, to verify the HP VCEM server is running. For example, 3. Verify that the User ID and password are correct for the VCEM server. Virtual Connect module product icons The following table lists the manageable Virtual Connect (VC) module product icons that display on the topology. TABLE 1 VC module icons Icon Icon VC module Multi-fabric VC module Virtual Connect module right-click menus TABLE 2 Menu item VC module right-click menus Product Accept Change Show Ports Only available when VC is missing from one fabric, but present in another fabric. Select to shift the view from the current VC (which is missing) to the VC present in the other fabric. Select to accept changes to the selected fabric. Select to show ports on the VC module. 6 of 9 Virtual Connect Enterprise Manager Server Guide

7 TABLE 2 Menu item VC module right-click menus Show Connections Properties Select to show connections to the VC module. Select to view Properties dialog box. Viewing VC module properties To view VC module properties, complete the following steps. 1. Right-click a VC module and select Properties. 2. Review the properties for the device. TABLE 3 Field Properties tab Fabric Name WwnName IP Address Status Type Port Count Product Name Serial # VC Firmware VC Domain Name VC Domain Group IO Bay Discovery Status Last Discovery The name of the fabric. (Fabric OS modules only) The name of the device. The world wide name of the device. (Fabric OS modules only) The IP address of the device. The operational status. The device type - Virtual Connect. The number of ports. The product name. The hardware serial number. The downloaded firmware version of the VC Ethernet management module and all VC FC modules managed by the VC Domain. The domain name. The domain group. The discovery status of the VCEM server of this module. The last time data collection was performed for this VC module on the VCEM server. Virtual Connect Enterprise Manager Server Guide 7 of 9

8 TABLE 4 Field Port tab Fabric Switch Port # Type Status Port Speed (Gb/s) Port WWN Physical/Logical NPIV Enabled Connected Switch The name of the fabric. The name of the VC module. The port number. The port type. The status of the port. For example, LOGGED-IN or NOT-LOGGED-IN. The speed of the port in gigabits per second. The world wide name of the port. Whether the port is Physical or Logical. Whether the port is NPIV enabled or not. The name of the switch connected to the port. TABLE 5 Field NPIV WWNs tab NPIV Port WWN NPIV Node WWN Name Uplink Port Number Uplink Port WWN Server Profile Server Bay Virtual Serial Number The world wide name of the NPIF port. The world wide name of the NPIF node. The user-defined name of the NPIV WWN. This is an editable field. The port number of the uplink. The port world wide name of the uplink. The server profile. The server bay number. The serial number. 3. Click Close to close the Properties dialog box. VCEM integration support in SMI-A Discovery of TopologyView and SANActiveConnections will be incomplete for VC modules connected to the end devices. HP SAN Network Advisor supports virtual connect discovery for the HP VC 8Gb 24-port FC module and VC 8Gb 20-port FC module through the HP Virtual Connect Enterprise Manager (VCEM) server. The AG and NPIV profile is updated to support the VirtualConnect (VC) modules of VCEM integration: Instances of Brocade_AccessGateway (VC module) for ElementConformsToProfile is not returned as complete topology. Therefore Brocade_AccessGateway of VC module does not conform to the AG and NPIV profile. 8 of 9 Virtual Connect Enterprise Manager Server Guide

9 Instances of the below classes will not be returned for VC as external management access points are disabled. - Brocade_ElementConformsToProfile - Brocade_AGWebGUIRemoteAccessPoint - Brocade_AGMgmtAccessPoint - Brocade_AGHostedRemoteAccessPoint - Brocade_AGHostedMgmtAccessPoint The Brocade_AGSoftwareIdentity.Manufacturer value is populated as HP for VC modules. Virtual Connect Enterprise Manager Server Guide 9 of 9