Exporting to DVD with EDIUS

Transcription

1 How To Guide Exporting to DVD with EDIUS desktop. grassvalley. com professional. grassvalley. com 2008 Thomson. All rights reserved. Grass Valley is a trademark of Thomson. All other trademarks are properties of their respective holders. All specifications are subject to change without notice.

2 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page Exporting to DVD with EDIUS EDIUS NLE software supports two methods of DVD export simple, interactive DVD titles with menus (DVD Creator), or a playable direct-to-dvd copy of your project (ProCoder Express for DVD see page 10). The DVD can have chapter points set according to any markers that have been placed on the timeline at specific points (the ProCoder Express DVD export method also allows chapters to occur at specific time intervals). Note: DVD Creator does not support video format transcoding. That is, it does not allow you to export an NTSC project out to a PAL DVD or vice versa you need to export your project as an MPEG-2 program or elementary stream with ProCoder Express for EDIUS first, and then import the converted stream into DVD Creator. Exporting to DVD with DVD Creator The DVD Creator utility allows you to create a DVD based off the project you are currently working on. It is handy to know that while DVD Creator appears to be a step-by-step wizard-based utility, you can jump back and forth between the different steps in order to fine-tune your DVD title. Since DVD Creator supports multiple sequences, In/Out points and timeline markers, it s a good idea to first make sure that these are opened and set correctly within your EDIUS project. To open DVD Creator, choose Print to DVD from the Export drop-down menu (the Export button is found in the bottom right corner of the Recorder window).

3 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page The DVD Creator utility will open, with the Movie page displayed. This screen lets you add the Titles that you want included on your DVD, with each Title representing a sequence within your EDIUS project. These Titles will be based off any In/Out points that you have set on each sequence and timeline markers will define the chapter points, so make sure you have set them correctly. The file size bar is very useful for determining how much space is taken up by your choice of titles, and what you may have to do to fit your content onto a single disc. If you re burning to a dual-layer disc, make sure your change the Media drop-down option. By default, DVD Creator will set the video and audio encoding format and bit rate settings automatically, in order to fit your selections onto the disc. If you want to change these options, choose the Settings button for the Title that you want to adjust. Uncheck the All Auto check box, and then uncheck the Video and/or Audio check boxes to enable adjustment. Choose the settings you want to use and then click OK. Note: It s recommended that you choose a video bitrate that is no higher than 8Mbps, for maximum compatibility with older set-top DVD players.

4 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page Once you are happy with the settings for your Disc, and have imported the sequences you want to use, choose the Style button at the top. Don t worry if you ve forgotten to import something, as you can return to the Movie screen at any time to add and remove Titles. The Style screen lets you choose a template from the inbuilt DVD menu gallery, and set up how your DVD menus will appear. The actual text and positioning can be adjusted in the next step, so for right now, we re just focusing on the general appearance. Ideally, you want to ensure that the Auto Layout option Auto is always checked - this is bound to the style you have chosen from the gallery. You can adjust the position of buttons later. Choose the Screen Size you wish to use for you DVD menus - the actual DVD video content will not be affected by this option. Some style templates include graphical chapter buttons for each of your chapters. If you don t want to use these, check the No Chapter Buttons check box. If your Titles have no chapter points, you can check the No Chapter Menu (only one chapter) check box. If the DVD only has one Title (remember, Titles are sequences in your EDIUS project), check the No Title Menu (only one title) check box.

5 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page At the bottom of the Style screen is the gallery strip. The gallery is broken up further into categories, each with a selectable tab. To apply a different Style, simply choose one from the gallery it will be applied instantly. Note: If you don t even want to use menus, you can uncheck the Use DVD Menu check box.

6 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page To fine tune your DVD pages, choose the Edit button at the top. The Edit screen lets you customize the size, position, fonts and font formatting, and actual graphics and text for each of your DVD menus within the project. Changing any item on a page is just a case of double-clicking on that item to bring up the Item setting window. Alternatively, you can also use the item list on the right side of the Edit screen, which contains a list of all the elements on the current menu screen. When you choose to edit an item, the following screen will appear. You can choose to use the basic character generator as shown, or use a nominated picture file by choosing the Picture tab.

7 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page In this example, we ve change the text, and gone through the Effect tabs to further alter the appearance. You can resize and reposition any item just by clicking on it and either dragging it to a new position, or clicking and dragging the handles (the white squares) to resize it. DVD Creator features a grid option (located at the bottom right corner) for you to snap your items to for accuracy.

8 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page You will notice that each chapter has a thumbnail image which is based off a frame of video contained within that section of the timeline. If you want to adjust that thumbnail s frame, simply choose to edit the Item setting, and then choose Change. You will be prompted to adjust the frame from within the EDIUS application itself. Just switch back to EDIUS (ie. Alt+Tab), position the edit cursor on the frame of video you want to use, then switch back to DVD Creator and choose Set. The new thumbnail image will be applied. To change the current menu screen to another screen within your DVD menu structure, choose another screen from the drop-down menu located at the right, above the item list. Once you re completely satisfied with your DVD and are ready for authoring, choose the Write button at the top of the screen.

9 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page The Write screen is essentially the final step of the process. From here you can go right ahead and burn to a disc with the Burn button. You may, however, want to save your project s image to a hard disk first to burn multiple copies later on. You can also choose to avoid burning the DVD disc entirely, and just make a hard drive copy of your new title. You can display and configure these options just by checking the Enable detail setting check box. Additional DVD playback behavior is configured with the Option tab. After you re done making any adjustments, click the Burn button at the bottom right corner to begin the burning process. The time taken to complete this process is dependant on the length of the project, the speed of the system (for encoding the necessary MPEG-2 video streams) and the speed of the DVD burner drive itself.

10 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page 10 Exporting to DVD with ProCoder Express Click on the Export button located in the bottom-right corner of the Monitor window. Select Print to file from the drop-down menu. The Select Exporter Plug-in window will appear. Choose Canopus ProCoder Express For EDIUS Wizard. After checking if the Export between In and Out checkbox is set appropriately, click OK. Tip: The Exporter dialog features a Save as default button. Clicking on this will set the currently highlighted exporter as the default exporter to use, when choosing the Default exporter(print to file) option from the Export menu. The ProCoder Express for EDIUS interface will appear. Choose the Use the ProCoder Express for EDIUS Wizard to select a target option and then click Next.

11 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page 11 Choose DVD and click Next. ProCoder Express can transcode between different video standards, making it very useful when delivering video to international clients that use a different standard. Choose NTSC if the disc will be used in locations such as North America, Japan or Korea. Choose PAL for all other areas. Click Next to continue.

12 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page 12 Note: DVD Format settings as described here should not be confused with region-coding or macrovision protection. Choose VOB to burn directly to DVD and click Next. Note: The other two options are designed to export a DVD-compliant file (or files) for use in a third-party DVD authoring program. This is necessary if menus and any other additional interactivity are needed for the DVD. ProCoder Express can handle the encoding process in two different ways. Constant bitrate is typically the recommended setting. Variable bitrate encoding is normally used if the project is considerably long and the overall picture quality vs. size of the DVD disc is an issue. Variable bitrate can deliver better results with a lower average

13 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page 13 bitrate, but will take longer to encode the project for DVD production. Choose the appropriate encoding method and then click Next. Choose the option that is closest to the duration of the project. Click Next. Tip: If using the 120 minutes option, the previous setting should be set to 2-pass Variable bitrate (2-pass VBR). Click the Previous button to return to this setting if needed. Choose the optimization setting and click Next. Typically the Optimize for Quality setting should be selected, as the other option will sacrifice picture quality in favor of a faster DVD production time.

14 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page 14 Although ProCoder Express will ultimately control filenames during the DVD production process, it will still need to know where to place temporary files that are created during the encoding process. Check the folder and filename entries are correct. Use the buttons to change the Drive and Folder location if necessary. Click Next to continue. The files that ProCoder Express creates can be reused to burn extra DVD copies at a later stage. A shortcut for burning existing DVD images can be found by clicking Start from the Windows taskbar, then choosing All Programs -> Canopus -> ProCoder Express for EDIUS - > Canopus ProCoder Express For EDIUS Burn DVD. The Job Summary screen offers a final opportunity to make sure the settings are correct. The Advanced Output

15 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page 15 Settings button provides more detailed controls over the DVD production process and is only recommended for users who are familiar with MPEG video encoding and DVD authoring. Click Convert to being the encoding process. The time taken to encode is determined by the quality settings already specified, the project s length and the speed of the system s CPU. Once encoding is finished, the DVD Burner window will be displayed. Review any final settings, insert either a DVD-R/RW or DVD+R/RW disc into the DVD burner drive and then click Next.

16 Thomson Grass Valley EDIUS How To Guide - Export to DVD Page 16 The DVD will be written. The length of time that the burning process takes is dependant on the overall length of the project and the speed of the DVD burner drive. Once completed, ProCoder Express can be closed.