Electrical and Electronic Products Testing & Certification Services

Transcription

1 Electrical and Electronic Products Testing & Certification Services

2 Bureau Veritas - The Group Founded in 1828, Bureau Veritas is a global leader in testing, inspection and certification, delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility. With a presence in 140 countries, we serve more than 400,000 clients globally. 1 global leader 1 core mission Conformity assessment and certification 8 businesses 140 countries >60,000 employees 940 offices 340 laboratories -1-

3 CONSUMER PRODUCTS SERVICES (CPS) Bureau Veritas Consumer Products Services works with retailers, importers, brands and manufacturers of consumer products worldwide to assess their products and manufacturing processes for compliance with regulatory, quality and performance requirements. We test products, inspect goods, assess factories, conduct social audits and train personnel. Our proactive solutions throughout the supply chain help our clients better manage risk, improve quality, protect their brands, reduce costs and time to market. CERTIFICATION As an independent certification body, Bureau Veritas Certification provides a full range of certification and auditing services. Our goal is to validate the conformity of management systems and processes of all kinds of organizations. We conduct audits against recognized standards, which may include customer specific requirements, in the fields of Quality, Health & Safety, Environment and Social Responsibility. Continuous improvement is promoted through follow-up audits. MARINE As a classification society, Bureau Veritas assesses ships for conformity with specific sets of rules, mainly determining structural soundness and reliability of machinery on-board. We also provide ship and marine equipment certification on behalf of Flag administrations. Additional services based on our expertise include consultancy, technical assistance and training. Through these activities, we contribute to global maritime safety and help protect the marine environment. GOVERNMENT SERVICES & INTERNATIONAL TRADE (GSIT) Bureau Veritas provides assistance to government authorities, implementing programs to maximize their revenues and check that products meet specified standards. Bureau Veritas also addresses the needs of private traders, international organizations and public bodies. Services include pre-shipment or destination inspection and verification of conformity, employ leading edge techniques such as risk management analysis and X-ray scanning. CONSTRUCTION Bureau Veritas helps organizations manage all quality, health & safety and environmental aspects of their construction projects, from design to completion. We assess conformity with all regulatory requirements, provide technical support at design stage, soils and construction material testing, and structural engineering diagnosis. We also help in project management. For property investors, we have developed specific solutions enabling them to assess or maintain their assets. INDUSTRY Bureau Veritas supports the industry by assessing equipment and processes from design stage to installation, commissioning and operation. At stake are reliability and integrity of operations and conformity with regulations. Services include conformity assessment, production monitoring, asset integrity management and certification. With our laboratories, we also check the integrity of industrial equipment and products through services such as non-destructive testing and materials testing. COMMODITIES Bureau Veritas provides a wide range of inspection and laboratory testing services across the entire value chain of commodities, both upstream and downstream, in three market segments: Oil and Petrochemicals, Metals and Minerals, and Agriculture. Inspectorate, acquired in September 2010, has been successfully integrated to the Group s new commodities business, which now totals a workforce of 11,000 employees worldwide. IN-SERVICE INSPECTION & VERIFICATION Bureau Veritas performs regular inspections to assess the equipment in operation with Health & Safety regulations or client-specific requirements. These missions aim at ensuring the safety of equipment ranging from electrical installations, fire safety systems, lifts and machinery to lifting equipment. Our services include inspections during equipment installation, periodic inspections in service and after maintenance or repair. -2-

4 Testing, Certification, Inspections, Audits and Supply Chain Solutions Choose a partner who has the ability to adapt with your business The Bureau Veritas Consumer Products Services division is a world-leading concept-to-consumer quality assurance and compliance services provider to manufacturers, distributors and retailers. With a presence in every major sourcing and selling territory around the world, our solutions help companies making, distributing or selling products, improve their product quality, safety and compliance, sourcing flexibility, speed-to-market, profitability and brand security throughout the supply chain. With over 37 years of experience in working closely with retailers, brands, vendors and manufacturers, Bureau Veritas Consumer Products Services is known as one of the global leaders in providing quality assurance and supply chain solutions. -3- OUR ACCREDITATIONS A2LA The American Association for Laboratory Accreditation ANSI American National Standards Institute BSI British Standards Institution BSMI Bureau of Standards, Metrology & Inspection CMA Canadian Medical Association CNAS Chinese National Accreditation Services COFRAC Comité Français d'accréditation CPSC U.S Consumer Product Safety Commission DAkkS Deutsche Akkreditierungsstelle GmbH FCC Federal Communications Commission HKAS Hong Kong Accreditation Service IEC International Electrotechnical Commission ISTA International Safe Transit Association KAN Komite Akreditasi Nasional KOLAS Korea Laboratory Accreditation Scheme LACE Textile Laboratory Accreditation Scheme NABL National Accreditation Board for Testing and Calibration Laboratories NOCSAE National Operating Committee on Standards for Athletic Equipment PNAC Pakistan National Accreditation Council SINGLAS Singapore Laboratory Accreditation Scheme TISI Thai Industrial Standards Institute TURKAK Turkish Accreditation Agency UKAS United Kingdom Accreditation Service VILAS Vietnam Laboratory Accreditation Scheme WRAP Worldwide Responsible Accredited Production ZLS Zentralstelle der Länder für Sicherheitstechnik PTCRB The PCS Type Certification Review Board GCF Global Certification Forum CTIA The Wireless Association TAF The Taiwan Accreditation Foundation

5 -4-

6 Bureau Veritas Consumer Products Services Division Electrical & Electronic Business Line Bureau Veritas CPS E&E Taiwan values its parent company's long-standing corporate reputation and adheres to its core values of honesty, trustworthiness, objectivity and impartiality. We are committed to provide our clients with the most professional and comprehensive product testing and certification services. We provide clients with integrated, comprehensive onestop testing services to avoid duplication of tests and to speed up the time-to-market of our clients products. As a partner to our client, the client s goal is our goal. Our most important mission is to help clients create products with higher economic values, establish brand names with greater reliability and achieve decisive competitive advantages in the market. In the area of electronics and electrical products, we provide market entry services for over 150 countries, and our ability to provide manufacturers in many fields with diverse CB (Certification Body). Our certification solutions are also leading the industry. Values Our core values are fixed and absolute. They focus on Integrity and ethics, impartial counsel and validation, respect for all individuals, social and environmental responsibility. Integrity and ethics We act with good faith, honesty and fairness. We do what we say we will do. We state clearly our contracts and actions and deliver them accordingly. We follow company policies and processes. We respect confidentiality of business and personal information. We respect local and international ethics and professional standards. We provide information, instruction and training as necessary to ensure the health and safety at work of our teams. We are all required to meet our health and safety duties and responsibilities at work. Impartial counsel and validation We deliver professional and unbiased advice. We deliver reports which are accurate records of actions in line with our best practices. Respect for all individuals. We treat others as they are entitled to be treated. We consider the impact of our personal actions on others. We have our individual contribution recognised and valued and receive accurate feedback on our performance. We respect differences, care about others and do not discriminate against others on race, ethnic origin, age, sex or religious and political beliefs. Social and environmental responsibility The growing commitment of companies to society creates new challenges to combine profitability and accountability. An awareness of these new risks creates new requirements and new activities and has an effect at both organisational and management levels of the company. Bureau Veritas as a whole, and each employee individually, takes account of the impact of their actions on the community, people and business. Bureau Veritas ensures that we are good neighbours to the communities in which we are doing business by complying with the law and acting in the right spirit. -5-

7 The first organization in Taiwan being approved to certify NCC 4G LTE products. DoCoMo MIMO OTA accredited lab Launching the first product testing information mobile app in Taiwan Acquiring FCC DFS band IEEE ac Master Device Certificate Qualified for Wi-Fi CERTIFIED ac Certification Services Outreaching the CBTL qualification scopes including IEC61960 and IEC Accredited as Industry Canada's first Foreign Certification Body in Taiwan for telecom product approval Providing cell phone testing service in Dongguan China Established the first country's MIMO OTA laboratory in Taiwan and in Korea Opening Korea Lab in December Providing PTCRB services Inaugurating Hsinchu Lab 2 Providing GCF services Extending service location to Dongguan Inaugurating Linkou Testing Building Accredited by CTIA to provide OTA services Providing WiMAX Forum certification services Accredited as a CBTL (Certification Body Testing Laboratory) under IECEE-CB scheme Accredited as a RCB (Regulatory Certification Body) by TAF (Taiwan Accreditation Association) and NCC (National Communications Commission) Joining the family of Bureau Veritas Facilities Bureau Veritas CPS E&E Taiwan has the most complete facilities in Taiwan and China, and can serve more than 100 clients simultaneously.» 10m/3m EMI radiation chambers/open sites» TV/DTV performance test rooms» WiMAX Forum chambers» EMI Conducted test rooms» EMS test rooms» ESD test rooms» RS chambers» EFT test rooms» Surge test rooms» RF test rooms» Telecom test rooms» Wi-Fi Alliance chambers» OTA chambers» Mobile conformance test chambers» SAR test rooms» NFC Forum test rooms» DFS test rooms» Safety test rooms» ISO 7637 test rooms» NEBS test rooms» Chemical test rooms 2004 Opening Hwaya Lab in October Providing Wi-Fi Alliance certification services 1999 Initiating RF service in Linkou Lab Establishing Hsinchu Lab (Hsinchu Lab 1) 1990 Initiating Safety services 1988 Founded in October in Linkou (Linkou Lab 1) by providing EMC services -6-

8 The most remarkable service, beyond customers expectations Our main services include EMC (electromagnetic compatibility), safety regulations, RF (wireless and radio frequency), Mobile RF/EMC, telecommunications, GCF/ PTCRB, NFC Forum, Wi-Fi, OTA, battery, PV inverter, digital TV, NEBS, Eco-design of energy-related products (ErP), power consumption testing and certification services as well as chemical one-stop solutions. Our ser vices cover the following industries: information technology, audio visual, communications, network communications, mobile handsets, home appliances, lighting, power tools, battery, solar energy and photovoltaic products, radio, industrial, scientific, medical, laser, and other related products. -7-

9 International Approvals Services -8-

10 International Approvals Services Your Passport to Fast Market Access Fast access to worldwide markets is a must for most manufacturers of electrical and electronic products. The challenge is to expedite the testing and certification requirements for multiple countries to meet marketing deadlines and satisfy customers' expectations. Bureau Veritas can partner with you to perform the testing/certification early in the product cycle, combining tests, saving time, and thus contributing to cost efficiency. What is International Approval? Help to understand the requirements for the target market Arrange the test plan to meet the target market requirements Perform tests and obtain certification license of the country Bureau Veritas International Approvals Services Region Asia America Africa Europe Mid-East Pre-Shipment Malaysia SIRIM/ST Mexico IFETEL / NOM / CONUEE Kenya CCK Russia FAC / CU /FSS / RFC Bahrain : TRA Saudi Arabia SASO Korea KC Brazil ANATEL / INMETRO South Africa Kazakhstan CU ICASA / SABS / NRCS Israel MOC / SII Kuwait KUCAS Singapore IDA / SPRING Argentina CNC / IRAM Tunisia CERT Ukraine Ukrsepro Qatar ictqatar Kenya KEBS Indonesia SDPPI Chile Subtel / SEC Ghana NCA Belarus Giprosvyaz / CU Iran CRA / TCI Nigeria SONCAP Countries and Standards India WPC / BIS Philippines NTC Thailand NBTC / TISI Paraguay Conatel Peru MTC Uruguay URSEC Egypt NTRA Uganda UCC Ivory Coast ATCI Albania TRA Serbia RATEL / Kvalitet Moldova ANRCETI Oman TRA Kuwait MOC Jordan TRC Uganda UNBS Tanzania : Pvoc Iraq : ICIGI Vietnam MIC / MPT Colombia CRT Senegal ARTP Lebanon TRA Brunei AiTi Jamaica SMA Morocco ANRT Saudi Arabia CITC Japan : MIC / PSE China MII / SRRC / CCC Hong Kong : OFCA Strengths Understand latest market access requirements Help to make sure the product launch date Completely understand the certification process and reduce costs GS / Bauart Mark -9- What is GS / Bauart Mark? GS stands for Geprüfte Sicherheit in German and means Tested Safety. It is respected throughout Europe and is viewed with more value than a CE mark by retailers. Bauart Geprüft means Type Approved in German. The Bauart Geprüft Mark or simply Bauart Mark, well recognized in Germany, is usually attached to components, sub-assemblies or other products that do not regulate under the GS mark scheme to verify the fulfillment of safety regulations. NRTL / SCC Solution What is NRTL / SCC solution? Nationally Recognized Test Laboratories (NRTLs) in USA and Testing Organizations / Certification Bodies in Canada are thirdparty organizations recognized by OSHA (Occupational Safety and Health Administration) in USA and SCC (Standards Council of Canada) in Canada as having the capability to provide product safety testing and certification services to the manufacturers of a wide range of products for use in North America. Bureau Veritas, approved by OSHA and SCC, can provide the necessary tools to meet certification requirements with an enhanced process. Key benefits of our GS / Bauart Mark Recognition. The GS/Bauart Mark is a well-known and respected voluntary certification mark in the European Union. Customer Confidence. A GS/Bauart Mark verifies to your customer and the consumer/end user that the product has been tested and certified to safety standards. Fast turnaround time. It takes 15 working days to turn around certification. Key benefits of our solution (Bureau Veritas Listed Mark) Fast turnaround time. It takes 15 working days for test and certification; 5 days for certification only. Recognition. Bureau Veritas Listed Mark is wellknown to U.S. retailers. 2 inspections per year.

11 BSMI Mark / Type approval of product / Declaration of Conformity What is BSMI Mark? BSMI (Bureau of Standards, Metrology and Inspection) is the certifying authority in Taiwan. All regulated products imported and marketed in Taiwan must conform to Safety and EMC inspection requirements. Key benefits of our BSMI solution BSMI designated testing lab Complete testing facilities Testing Standards Product What is NCC Type Approval? NCC (National Communications Commission) is the certifying authority in Taiwan for Telecommunication Terminal Equipment (TTE) and Low-Power Radio-Frequency Device (LPD) that should comform to NCC's requirements and get type approval certificate before being marketed in Taiwan market. Service Scope 9kHz to 300GHz Low-Power Radio-Frequency Device: WLAN device (WLAN IEEE a/b/g/n/ac/ad), 60GHz Wireless HD, UNII, Bluetooth, RFID, ZigBee, wireless keyboard, wireless mouse, wireless earphones and microphone, family radio service (FRS), citizens band radio service, wireless remote control toy, wireless What is CB? CB Report and Certificate CB is the abbreviation for "Certification Body". The CB Scheme is an international system for mutual acceptance of test reports and certificates among participating countries and certification organizations. A manufacturer utilizing a CB test certificate issued by one of the accepted National Certification Bodies (NCBs) can obtain certification marks of the latter, within their scope of adherence, in the countries where the accepted NCBs are located. Standards OFF Safety: CNS , CNS , CNS , CNS EMC: CNS 13438, CNS TRON Safety: CNS EMC: CNS 13439, CNS 14409,CNS HOUS Safety: CNS 3765, IEC , CNS 13516, CNS 12625, IEC , -6, -9, -13, -15, -23, -55 EMC: CNS LITE EMC: CNS ISM EMC: CNS 13803, CNS Battery CNS NCC Type Approval Key benefits of our NCC solution First private lab accredited by NCC and TAF. remote controller, wireless alarming system, medical implant communications service (MICS) devices First RCB can issue Taiwan WBA Certificate and provide Online Application Service and Project Status Tracking System. We integrate the professional capabilities in our company to substantially shorten the time for your telecommunication and radio-frequency product to market. Public Switched Telephone Network (PSTN) telecommunication terminal equipment: telephone set (including VOIP phone), automatic alarming equipment, telephone answering machine, fax machine, remote control equipment, cordless phone, KTS equipment, data equipment (including ADSL, Cable Modem), caller ID terminal equipment, 2.4/5.8GHz radio-frequency telecommunication terminal equipment Public Land Mobile Network (PLMN) telecommunication terminal equipment: Long Term Evolution (LTE mobile phone), wireless broadband access (WBA, i.e. mobile WiMAX) equipment, the third generation mobile telecommunication terminal equipment (3G mobile phone), GSM 900/DCS1800 cellular phone and mobile equipment (2G mobile phone) Key benefits of our CB solution Fast Global Assess: over 40 countries Glowing Scheme: many non-member countries accept a CB Report/Certificate Elimination of re-testing Fast turnaround time: typically 15 working days Broad scope: EMC, OFF, TRON, BATT, PV, MED, SAFE, MEAS, HOUS, LITE -10-

12 Testing and Certification Services

13 Barrier-free RF Testing Services A global access to wireless world With the increasing convergence of IT and radio/telecoms technologies, the wireless/digital home becoming more a reality, and with radio technologies being introduced and updated on an almost daily basis, partnering with a knowledgeable technology and compliance expert such as Bureau Veritas is a critical success factor being adopted by many companies. Service Scope Mobile 2G/2.5G/3G/3.5G/4G Mobile Terminal Equipment WiMAX Product UWB (Ultra-wideband) Product Zigbee, Z-Wave Broadband Power Line System Femtocell Wi-Fi Product (IEEE a/b/g/n/ac WLAN) Bluetooth Product RFID SRD (Short Range Device) 60GHz Wireless HD Product Test Standards Region Equipment buyers and prescribers such as importers, retailers and telecom/wlan operators, have also made it very clear that they require increasing quality of product and supply chain management on a worldwide level. Staying abreast of, and compliant with, the legal framework in your target markets is critical for your success. Saving costs by working with us at the outset of your project also ensures compliance costs can be kept to a minimum whilst time to market is improved upon. Test Items EIRP/ERP Field Strength Frequency Tolerance Rx Sensitivity HAC (E&H-field, T-Coil) Output Power Occupi ed Bandwidth Tx and Rx Spurious Emission EMF test SAR DFS Adaptivity PWS RF Testing Standards Taiwan LP0002, PLMN01, PLMN02, PLMN08, PLMN09, PLMN10, IS2032-1, IS2045-0, IS2037-0, IS2050, CNS , CNS14959 USA FCC Part 15, 22, 24, 25, 27, 74, 90, 95, FCC OET Bulletin 65 Supplement C, FCC Part Canada RSS-Gen, -102, -112, -129, -130, -132, -133, -139, -192, -193, -195, -197, -199, -210, -220, -310, -243 EU AU/NZ Japan Korea China Singapore EN , EN , EN , EN , EN , EN , EN , EN , -2, -3, -13, -14, -15, EN , EN , EN , EN , EN , EN , EN , EN 50385, EN 62311, EN 62233, EN 62479, EN 50364, EN 50360, EN , -2, EN AS/NZS 4268, ACA Radio Communications Standards RCR STD-33, ARIB STD-T66, -T71, -T81, -T82, -T89, -T90,-T91, -T94, -T96, -T93, -T107, -T108, Ordinance of Technical Regulations Conformity Certification of Specified Radio Equipment MIC Notification No Administration of Low power Radio Equipments (SRD) IDA TS SRD, IDA TS UWB, IDA TS WBA Why choose us? Bureau Veritas is one of the first labs that are equipped with 200 GHz RF testing facilities and can provide more services for millimeter wave devices in comparison with traditional labs that are equipped with 40 GHz RF testing facilities only. One of the first labs who perform RF tests, with more than 20 years of experience -12-

14 Global EMC Testing & Certification Services EMC Compliance Expert Complying with EMC regulations is a critical issue when looking to launch your product on the global marketplace. Understanding the myriad of regulations that affect your product in your target market is key to this success. Bureau Veritas testing process begins with understanding the product from your point-ofview: where will the product be marketed, who will use the product, what are your quality expectations? Service Scope Information Technology Equipment Telecommunication Equipment Household Application / Electric Tools / Electric Toys Electrical Lighting Equipment Sound & TV Broadcast Receivers Railway Systems Road Traffic Signal Systems Mobile Devices Electrical Device for use in Road Vehicles and Boats Wireless (RF) / Telecom / WiMAX Devices Other electrical products (ex. UPS; ISM...etc.) Test Standards The answers help us to identify the regulatory barriers and to develop a rationalized EMC Test plan for your product in your target markets, saving you from retesting for each market you will be selling into. Consequently, the appropriate testing is performed so you can sell, manufacture, or distribute your product anywhere in the world with confidence. Our engineers will also help fix any EMC issue we may encounter during testing, ensuring your market release date is met. Test Items Electro Magnetic Interference test (EMI test) Conduction Emission Radiated Emission Current Harmonic Voltage Fluctuation & Flicker Disturbance Power Clicker Electro Magnetic Susceptibility test (EMS test) Electrostatic Discharge (ESD) Radiated Susceptibility (RS) Electrical Fast/Burst Transient (EFT) Surge Conducted Susceptibility (CS) Power Frequency Magnetic Field (PFMF) Voltage Dips (DIP) Ring Wave -13- Region Taiwan USA Canada AU/NZ Japan Korea China Singapore Russia EU EMC Testing Standards CNS (ITE) ; CNS (AV) ; CNS (Home Appliance) ; CNS (ISM) ; CNS (Microwave Oven) CNS (Lighting) ; CNS (DTV EMS) ; CNS (Uninterrupted power systems) ; CNS (DTV Performance) FCC Part 15B ; FCC Part 18 (ISM) ICES-003 (ITE) ; ICES-006 (HomePlug) ; BETS-7 (TV) ICES-001 (ISM) AS/NZS CISPR 11 (ISM) ; AS/NZS CISPR 13 (AV) ; AS/NZS CISPR 15 (Lighting) ; AS/NZS CISPR 22 (ITE) AS/NZS CISPR 14-1 (Home Appliance) ; AS/NZS CISPR 32 Multimedia equipment J55013 (AV, PSE) ; J (Home Appliance) ; J55022 (ITE) ; VCCI V-3 / V-4 (ITE) ; JEITA IT-3001 (EMS) KN 11 (ISM) KN 13 / KN 20 (AV) KN 15 (Lighting) KN 22 / KN 24 (ITE) GB 9254 (ITE) ; GB (AV) ; GB (Harmonic) IDA TS EMC for Telecommunication Equipment IDA TS PLC (Home Plug) GOST R (ITE EMI) ; GOST R (ITE EMS) EN (Telecom Network Equipment) EN (Common Requirements for Radio EMC) EN (SRD) EN (Fixed WiMAX) EN (GSM and DCS) EN (Wireless Microphone) EN (Wireless LAN) EN (GPS) EN (Base Station/Femtocell) EN (WCDMA/LTE) EN (UWB) EN (EPS for Mobile telephones) EN ( Cellular Communication Base Station (BS), repeater and ancillary equipment ) EN (Alarm System) EN ( PLC in-home use ) EN (ISM) MPRII TCO ( Ergonomics ) EN / EN (AV) EN / EN ( Home Appliance) EN / EN (Lighting) EN / EN (ITE) EN / EN (Multimedia Equipment) EN (Medical Electrical Equipment) EN / (Har. / Flick) EN / ( Voltage Fluctuations & Flicker Interference ) EN/IEC (ESD) EN/IEC (RS) EN/IEC (EFT) EN/IEC (Surge) EN/IEC (CS) EN/IEC (Magnetic) EN/IEC ( Pulsed Magnetic Field) EN/IEC (Dip) EN/IEC (Ring Wave) EN (EMS of non-heavy industry) EN (EMS of heavy industry) EN (EMI of non-heavy industry) EN (EMI of heavy industry) EN (Low Voltage Power Supplies, DC output) EN (Measurement and Lab Use) EN (UPS) EN (HomePlug) EN (Railway for Rolling Stock) EN (Railway Apparatus) EN 50498/ISO7637/CISPR25 (Car Apparatus)

15 Smart Grid product EMC Testing Services Comprehensive Smart Grid EMC Leading Testing Organization Smart Grid was raised because of the concern of environmental preservation. Every developed country is trying to get rid of the power plants which cost high energy and high pollution step by step; instead of using those power plants, integrating low pollution power facilities and changing the way uses power are getting popular, also stimulating the concept of Smart Grid. The key of Smart Grid is its function bi-directional communication. Power utility uses remote monitoring/control system to monitor the power using status, and to control electricity distribution. Besides, users can understand their condition of power using, and adjust the way of power using to save electricity and money. In the frame of Smart Grid, Advanced Metering Infrastructure (AMI) is the most crucial element. AMI is composed of smart power meter, information management software of bi-directional communication network & data analysis, circuit protection scheme, and automatic meter reading center. Every industry is expanding their product line into the frame of Smart Grid aggressively in Taiwan; however, all testing works are controlled by multi-national laboratories. Bureau Veritas now provides the specific EMC testing capacity for Smart Grid related equipment. Service Scope Factories Nuclear Power Plant Thermal Power Plant For any electronic product in Smart Grid Such as : Smart Power Meter, Telecommunication Equipment, Information technology equipments in Power Plants, Wireless (Radio Frequency) Apparatus, etc. Homes Cities and Offices Ecological Vehicle Smart Grid Wind Generator Photovoltaic Hydraulic Power Generation Test Items Electro Magnetic Interference test (EMI test) Conducted Emission Radiated Emission Electro Magnetic Susceptibility test (EMS test) Electrostatic Discharge (ESD) Radiated Susceptibility (RS) Electrical Fast/Burst Transient (EFT) Surge Conducted Susceptibility (CS) Power Frequency Magnetic Field (PFMF) Oscillatory Magnetic Field (OSC-MF) AC Voltage Dips (AC-DIP) Low Frequency Conducted Susceptibility (LFCS) Ripper Oscillatory Wave (OSC-wave) DC Voltage Dips (DC-DIP) Surge Withstand Capability (SWC) Test Regulations IEC ; IEEE 1613 ; IEC IEC/EN (ESD) IEC/EN (RS) IEC/EN (EFT) IEC/EN (Surge) IEC/EN (CS) IEC/EN (PFMF) IEC/EN (OSC-MF) IEC/EN (AC-DIP) IEC/EN (Ring/OSC-wave) IEC/EN (LFCS) IEC/EN (Ripper) IEC/EN (OSC-wave) IEC/EN (DC-DIP) IEEE Std C (SWC) IEEE Std C (RS) IEEE Std C (ESD) Our Strengths Comprehensive Smart Grid EMC Leading Testing Organization in Taiwan TAF ISO accredited lab -14-

16 International Telecom Approvals Services Help your products access global markets fast Telecom devices have become essential to everyone s daily life. In order to keep public network s safety, most countries have their requirements to regulate the devices. We integrate our capabilities and capacities including RF, EMC, Safety, SAR, etc. to conduct testing, produce test reports, approve or help obtain type approvals. With our supports, your telecom devices can easily comply with all requirements of your target markets. Service Scope Telephone Terminal Equipment ADSL/ADSL 2/ADSL 2+/VDSL/VDSL 2, Modem VOIP PBX Telephone Cordless phone Caller ID terminal equipment Fax machine Answer machine Alarm system General Telecom Equipment Test Standards USA Region Canada EU Taiwan General Telecom Equipment Test Standards FCC Part 68 TIA-968-B IC CS-03 Part I/V/VIII TBR21 ETSI ES /-2/-3 ETSI EN ETSI ES TBR 38 NCC PSTN01 ADSL01 VDSL01 Japan JATE Australia AS/CA S003.1/ S003.3 AS/ACIF S002/S004/ S041/S043.1/ S043.2 HK HKTA 2011 South Africa Singapore TE-001 IDA TS PSTN Why choose us? Taiwan: RCB qualification to issue both Telecom and RF NCC certificates USA: TCB approval Canada: Government of Canada Industry Canada / FCB approval EU: CAB approval Australia: ACMA, NATA approved lab -15-

17 NEBS Testing Services Your Ticket to North America Telecom NEBS (Network Equipment Building System) testing is a requirement for telecom equipment to be deployed in central office facilities, customer premises and outside plant facilities. Telecom service providers require the tests to ensure network integrity and continuous operation of the network. The standards most commonly required are the Telcordia GR-1089 CORE and GR-63 CORE. Bureau Veritas offers knowledgeable testing to these standards for all U.S. telecom service providers. Service Scope Bureau Veritas understands and applies the individual requirements of each telecom ser vice provider. Its test reports have been found acceptable to them as well. The items we cover are: GR-1089 CORE EMI Emissions EMS Immunity Lightning and AC Power Fault Power Induction / DC Potential Electrical Safety Corrosion Bonding and Grounding DC Power Requirements GR-63 CORE Temperature and humidity Altitude Spatial criteria Fire resistance Equipment handling Earthquake (Office vibration) Office vibration Airborne contaminants Acoustic noise Illumination GR487 UL-1449 VZ-TPR 9205 TCG NEBS Checklist Our Strengths ISO accredited lab Verizon-approved ITL -16-

18 Mobile PTCRB & GCF Conformance Testing Services Testing & Certification for mobile terminal's compliance to 3GPP PTCRB and GCF develop the certification programs based on the industry needs. The certification scheme is to make sure that the GSM, WCDMA and LTE devices comply with the 3GPP standards. PTCRB certification mainly focuses on the North America Bands, and GCG certification mainly verifies the devices working in the bands outside the North America. They recognize one another's certification testing data. PTCRB and GCF certification programs are to verify the GSM, WCDMA and LTE devices, like smart phones and GSM/WCDMA/ LTE data cards. They are complementary to all regulatory regimes with participation on a voluntary basis. Complete PTCRB and GCF certifications contain conformance test, interoperability test, and field trial test. Test Standards Bureau Veritas can offer you a full range of PTCRB & GCF conformance test, Interoperability test and field test to satisfy your one-stop desire. PTCRB & GCF GSM Test Categories Test Specifications RF Test 3GPP TS Protocol Test (formerly GSM 11.10) Audio Test 3GPP TS SIM Test 3GPP TS PTCRB & GCF WCDMA Test Categories Test Specifications RF Test 3GPP TS (inc.rrm) RSE Test 3GPP TS Protocol Test 3GPP TS GPP TS (USIM) USIM Test 3GPP TS (USAT) ETSI TS (UICC) Audio Test 3GPP TS (Audio) A-GPS Test 3GPP TS (A-GPS) AE OMA Standards PTCRB & GCF LTE Test Categories Test Specifications RF Test 3GPP TS RSE Test 3GPP TS RRM Test 3GPP TS Protocol Test 3GPP TS GPP TS R8 LTE SIM Test 3GPP TS Product Categories GSM GPRS EDGE Product Categories WCDMA HSDPA HSUPA HSPA+ Product Categories LTE Product Types Cellular phone, Notebook with 2G module, E-Book, USB dongle, etc. Product Types Cellular phone, Notebook with 3.5G module, E-Book, USB dongle, etc. Product Types Cellular phone, Notebook with 4G module, E-Book, USB dongle, etc. -17-

19 Mobile OTA Performance Testing Services Guarantee high-quality signal transmission Mobile OTA (Over-The-Air) Performance test is a radiated performance test defined by CTIA The Wireless Association for wireless devices to verify their 3-dimension Radiated RF Power and Receiver Performance. Its main test items include TRP (Total Radiated Power) and TIS (Total Isotropic Sensitivity) two categories. However, in Wi-Fi Alliance certification field, other terminologies RPT (Radiated Performance Test) and CWG-RF (Converged Wireless Group RF) are used to name OTA respectively. data rate. It brings more challenges for OTA Performance Test. Currently, there are several wireless communication systems support MIMO, such as IEEE n, IEEE ac, HSPA+, and LTE, etc. At this stage, MIMO OTA Performance testing focuses on the validation of wireless communication devices downlink data throughput in different channel environment. Moreover, under U.S. FCC (Federal Communications Commission) Enhanced 911 (E911) requirement, cellular devices are required to be enabled by a-gps (Assisted GPS) system that can have the GPS satellites position the emergency call dispatcher within seconds, rather than several minutes, even in very poor signal conditions. The OTA Performance is one of the key criteria to ensure the functionality of the a-gps system. With the increasing in demand for mobile data transmission, wireless communication technology from a single antenna to the direction of multiple antenna development, the use of multi-antenna spatial multiplexing applications to increase the Our Solutions We, Bureau Veritas, can offer you a full range of OTA testing and certification services to satisfy your one-stop outsourcing desire. Service Items Functions Product Types CTIA/GCF OTA GSM, GPRS, EDGE, CDMA2000, 1XEVDO, 1XRTT, WCDMA, HSDPA, HSUPA, HSPA+, LTE Cellular phone, Notebook with 2G, 3G 4G module, E-Book, 3.5G, 4G dongle, etc. CTIA A-GPS OTA GSM, WCDMA, CDMA2000 Cellular phone, Smartphone, etc. Wi-Fi CWG-RF 2D/3D Antenna Pattern IEEE802.11b, g, a and Wi-Fi Mobile Converged 400MHz-10GHz Antenna USB Wi-Fi Dongle, External Wi-Fi Card, Internal Wi-Fi Card, Ultra- Mobile PC, Notebook Computer, PDA, Phone, Smartphone, etc. Antenna used for 2G/3G/WiFi/BT/UWB, Notebook, E-Book, WLAN Card and other Wireless products Vodafone OTA VF_Ant_Req_V2.4 Cellular phone, Smartphone, 3.5G/4G Dongle, etc MIMO OTA LTE MIMO throughput Cellular phone, Smartphone, 3.5G/4G Dongle, etc Our Strengths CTIA Authorized Testing Lab (CATL) PTCRB Accredited Lab GCF Testing Lab (GCF RTO) Vodafone Approved OTA Lab DoCoMo Approved Lab T-Mobile Approved Lab Wi-Fi Alliance Authorized Test Lab -18-

20 NFC Forum Certification Services A global standard for NFC Conformance Testing In recent years, the demand for robust personal identification technology is increasing. NFC (Near Field Communication) is a standard based technology. It allows users to exchange information, and communication via contactless way. The most well-known application for NFC will be mobile wallet solution. Google announced NFC-based Android Beam on Google I/O 2012 keynote. Microsoft also announced that Windows Phone 8 support NFC function, and users can tap an NFC tag embedded in a magazine ad to launch a mobile Web site or to receive contact information by tapping a tag embedded in a business card. However, the mobile wallet solution is not the only application for NFC. Apple and Google have demonstrated their solutions to support document exchange. The trend and demand of NFC is expected to grow rapidly in the near future. The Near Field Communication (NFC) Forum is a non-profit industry association founded by Nokia, Philips, and Sony in It promotes the use of NFC short-range wireless interaction in consumer electronics, mobile devices and PCs. The NFC Forum Certification is targeting to make sure devices can conform to standard requirement and eliminate interoperability issues between devices. Service Scope Regulatory CE-EU FCC-US IC-Canada NCC-Taiwan Worldwide test & certification Wave-1 Certification Wave-2 Pre-Testing Safety (granted as a CBTL) EMC (granted as a CBTL) RF NFC Forum Digital Protocol, Tag Operations RF Analog,SNEP,LLCP Our Strengths Bureau Veritas is one of the few labs joined NFC Forum in Taiwan, and qualified as designated testing laboratory. In addition, it has rich testing experience in regulatory testing for NFC/RFID products. Moreover, the HwaYa Headquarter has implemented a most robust testing system to comply with latest testing requirement from NFC Forum. -19-