tibbr, tibbr Service, tibbr Community, and tibbr Community Service Release Notes

Transcription

1 tibbr, tibbr Service, tibbr Community, and tibbr Community Service Release Notes Software Release May 2014 Two-Second Advantage

2 Important Information SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR ANY OTHER PURPOSE. USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE SOFTWARE (AND WHICH IS DUPLICATED IN LICENSE.PDF) OR IF THERE IS NO SUCH SOFTWARE LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED IN THE LICENSE FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN AGREEMENT TO BE BOUND BY THE SAME. This document contains confidential information that is subject to U.S. and international copyright laws and treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO Software Inc. TIBCO, Two-Second Advantage, TIBCO ActiveMatrix BusinessWorks, tibbr, TIBCO Silver are either registered trademarks or trademarks of TIBCO Software Inc. in the United States and/or other countries. All other product and company names and marks mentioned in this document are the property of their respective owners and are mentioned for identification purposes only. THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME TIME. SEE THE README.TXT FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A SPECIFIC OPERATING SYSTEM PLATFORM. THIS DOCUMENT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENT AT ANY TIME. THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY OR INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES. Copyright TIBCO Software Inc. ALL RIGHTS RESERVED. TIBCO Software Inc. Confidential Information

3 iii Contents Preface v Typographical Conventions vi TIBCO Resources ix How to Join TIBCOmmunity ix How to Access All TIBCO Documentation ix How to Contact TIBCO Support ix Release Notes New Features Release Release Release Release Changes in Functionality Release Release Release Release Deprecated Features Migration and Compatibility Closed Issues Known Issues

4 iv Contents

5 v Preface tibbr is the first workplace communication tool with which you can follow subjects that relate to your work and interests besides following people as you do in typical social networking applications. That way, you have much more flexibility in obtaining the right information at the right time in the right context. In fact, the information will find you. Topics Typographical Conventions, page vi TIBCO Resources, page ix

6 vi Typographical Conventions Typographical Conventions The following typographical conventions are used in this document. Table 1 General Typographical Conventions Convention ENV_NAME TIBCO_HOME ProductAcronym_ HOME Use TIBCO products are installed into an installation environment. A product installed into an installation environment does not access components in other installation environments. Incompatible products and multiple instances of the same product must be installed into different installation environments. An installation environment consists of the following properties: Name Identifies the installation environment. This name is referenced in documentation as ENV_NAME. On Microsoft Windows, the name is appended to the name of Windows services created by the installer and is a component of the path to the product shortcut in the Windows Start > All Programs menu. Path The folder into which the product is installed. This folder is referenced in documentation as TIBCO_HOME. TIBCO ProductName installs into a directory within TIBCO_HOME. This directory is referenced in documentation as ProductAcronym_HOME. The default value of ProductAcronym_HOME depends on the operating system. For example, on Windows systems, the default value is C:\tibco\ProductAcronym\ReleaseNumber. code font Code font identifies commands, code examples, file names, path names, and output displayed in a command window. For example: Use MyCommand to start the foo process. bold code font Bold code font is used in the following ways: In procedures, to indicate what a user types. For example: Type admin. In large code samples, to indicate the parts of the sample that are of particular interest. In command syntax, to indicate the default parameter for a command. For example, if no parameter is specified, MyCommand is enabled: MyCommand [enable disable]

7 Preface vii Table 1 General Typographical Conventions (Cont d) Convention italic font Key combinations Use Italic font is used in the following ways: To indicate a document title. For example: See TIBCO ActiveMatrix BusinessWorks Concepts. To introduce new terms For example: A portal page may contain several portlets. Portlets are mini-applications that run in a portal. To indicate a variable in a command or code syntax that you must replace. For example: MyCommand PathName Key name separated by a plus sign indicate keys pressed simultaneously. For example: Ctrl+C. Key names separated by a comma and space indicate keys pressed one after the other. For example: Esc, Ctrl+Q. The note icon indicates information that is of special interest or importance, for example, an additional action required only in certain circumstances. The tip icon indicates an idea that could be useful, for example, a way to apply the information provided in the current section to achieve a specific result. The warning icon indicates the potential for a damaging situation, for example, data loss or corruption if certain steps are taken or not taken. Table 2 Syntax Typographical Conventions Convention Use [ ] An optional item in a command or code syntax. For example: MyCommand [optional_parameter] required_parameter A logical OR that separates multiple items of which only one may be chosen. For example, you can select only one of the following parameters: MyCommand para1 param2 param3

8 viii Typographical Conventions Table 2 Syntax Typographical Conventions Convention Use { } A logical group of items in a command. Other syntax notations may appear within each logical group. For example, the following command requires two parameters, which can be either the pair param1 and param2, or the pair param3 and param4. MyCommand {param1 param2} {param3 param4} In the next example, the command requires two parameters. The first parameter can be either param1 or param2 and the second can be either param3 or param4: MyCommand {param1 param2} {param3 param4} In the next example, the command can accept either two or three parameters. The first parameter must be param1. You can optionally include param2 as the second parameter. And the last parameter is either param3 or param4. MyCommand param1 [param2] {param3 param4}

9 Preface ix TIBCO Resources You have three ways in which to connect with TIBCO s resources. How to Join TIBCOmmunity TIBCOmmunity is an online destination for TIBCO customers, partners, and resident experts, a place to share and access the collective experience of the TIBCO community. TIBCOmmunity offers forums, blogs, and access to a variety of resources. To register, go to How to Access All TIBCO Documentation You can access TIBCO s documentation here: How to Contact TIBCO Support For comments or problems with this document or the software it addresses, please contact TIBCO Support as follows. For an overview of TIBCO Support, and information about getting started with TIBCO Support, visit this site: If you already have a valid maintenance or support contract, visit this site: Entry to this site requires a user name and password. If you do not have a user name, you can request one.

10 x TIBCO Resources

11 1 Release Notes For product information that was not available at release time, go to the TIBCO Support site at Access to that site requires that you have a valid maintenance or support contract and that you log in with a valid user name and password. If you do not have the login credentials, click Register with Support. Topics New Features, page 2 Changes in Functionality, page 8 Deprecated Features, page 11 Migration and Compatibility, page 12 Closed Issues, page 13 Known Issues, page 24

12 2 Release Notes New Features This section describes the new features by release. Release Release contains the following new features: Subjects A major redesign of the subject UI offers additional capabilities, as follows: Tabs The subject content is organized in six default tabs at the top: Wall Posts, People, Links, Files, Bookmarks, and Trends. You can rearrange their display order from the Actions menu. In addition, apps can add their own tabs to display related content on subject pages. New content panes A number of new content panes are available in the right panel. Subject owners can customize the right panel of the Subject Home and Wall Posts tabs. Manage menu A new Manage drop-down menu, available to subject owners and tibbr administrators, is at the top of all subjects. The menu items are Edit Details, Manage Owners, Manage Followers, Manage Groups, Manage Tabs, Manage Bookmarks, and Add Subject Home Page. Subject Home Subject owners can create a unique landing page for the subject and assign a page from the tibbr Pages app as the default. Closure of subjects Subject owners can close subjects whose content is, for example, out-of-date. Afterwards, depending on their permissions, closed subjects remain visible but are not open for posting any more. Subject owners can reopen closed subjects, if desired. Favorite Subjects While on a subject, choosing Actions > Add to Favorites List marks the subject as a favorite. Subsequently, that subject appears under Favorite Subjects in the pane that is displayed on a mouse-over of Subjects in the left panel. Communities We have enhanced the user interface and capabilities for your community networks: You can now more seamlessly connect to, manage, log in to, share posts with, and receive notifications from your communities. VIP The VIP capability enables you to specify a maximum of 10 VIPs, that is, people or subjects whose posts are important to you. tibbr then collects their posts, which are accessible from the VIP tab in the left panel for easy access. You can also make VIP posts the default display on your wall.

13 New Features 3 Broadcast subjects While creating a broadcast subject, you can select the option Allow all users to post to this subject so that all your colleagues can post to that subject or reply to its posts. Private profile fields If you specify that your profile is private, a tibbr administrator can set one or more of your profile fields as being private. Afterwards, only your approved followers can view those fields. Attaching files to posts While posting on the wall, dragging a file to anywhere in the Post area opens the file-attachment pane, into which you can drop the file. This capability works only in modern browsers, such as Chrome and Internet Explorer 10. Logout in Security Assertion Markup Language (SAML) authentication mode tibbr now supports logout in SAML authentication mode. Localization tibbr now supports three more languages: Chinese (Traditional), Korean, and Italian. That means besides English, tibbr is now available in 13 languages: Chinese (Simplified), Chinese (Traditional), Dutch, French, French (Canada), German, Italian, Japanese, Korean, Portuguese (Brazilian), Spanish (Mexican), Swedish, and Turkish. Gadgets Four new gadgets are now available: User Post, SharePoint Theme Setting, Resource Messages, and tibbr Wall. tenant:create utility A new utility, tenant:create, is now available for creating tenants in a multitenancy setup. Enhanced monitoring A new utility enables you to check the connectivity to several key components of tibbr, such as the search server and the server. Monitoring applies only if you are hosting tibbr on premise. New parameters This release delivers the following new configuration parameters: set_private Setting this parameter in the user_meta_details.yml file to true specifies that certain fields under Personal Details in a user s profile are private. The default is false. base_community By default (a setting of true), this parameter in the app_config.yml file specifies that your tibbr instance is the base community. logout_enabled and idp_slo_target_url These two parameters, associated with single logout, specify, respectively, the enabling or disabling of single logout and the identity provider s URL for single logout.

14 4 Release Notes enabled and type under signed_logout These two parameters specify, respectively, whether the SAML logout request is signed and whether tibbr sends the signature in the query-string parameter Signature with SigAlg specified. enabled and type under signed_authentication These two parameters specify, respectively, whether the SAML authentication request is signed with a signature and, if so, what the signature type (enveloped or detached) is. Release Release contains no new features. Release Release supports signing of authentication requests for SAML. To configure, edit the app_config.yml file and make the saml section under authentication read as follows: authentication: saml: signed_authentication: true signing_certificates: public_crt_file: /crt_file_path/crt_file_name.crt private_key_file: /key_file_path/key_file_name.key Note the following: By default, signed_authentication is set to false. You must specify the absolute paths of the public certificate (public_crt_file) and the private key (private_key_file). The paths in the code segment above are examples. Release Release contains the following new features: tibbr for Salesforce.com app With the new tibbr for Salesforce.com app (also called the tibbr Salesforce app), you can perform various Salesforce-related tasks, such as viewing, sorting, or commenting on Salesforce records, and viewing record details. Note: This app requires a separate license.

15 New Features 5 tibbr Tasks app With the new tibbr Tasks app, you can perform various project-related tasks, such as viewing creating, editing, or deleting projects; creating, editing, or deleting task lists or tasks; and inviting colleagues to be project members. Note: This app requires a separate license. Enhancements in tibbr Ideas (previously called tibbr Ideation) app tibbr now displays similar ideas with matching keywords. In addition, you can do the following: Post ideas to subjects instead of categories. That way, you can share ideas privately through private subjects. Administrators can continue to triage ideas through categories. Create an idea from any post by choosing More > Apps > Create Idea. Specify idea categories. Filter ideas by contributor. Note: This app requires a separate license. Enhancements in tibbr Files app The tibbr Files app now offers more capabilities: previewing files, copying file links, and viewing file properties. Enhancements on Apps page The Apps page, which you access by clicking Explore Apps in the Apps tab in the left panel, now contains three main tabs at the top: My Apps, Company Apps, and Marketplace Apps. Mobile-ready option for apps While creating or editing apps, you can specify in the settings whether they are available for mobile devices. Rich-text support in template The notifications that you receive for tibbr posts now have text formatting. Hashtags Hashtags in the form of #one-word-string enable you to collect posts that contain similar content. While you are typing a hashtag, tibbr lists those tags with similar words from which you can choose one as desired. tibbr Developer Center The tibbr Developer Center, accessible as a left-panel tab on the tibbr home page, offers many resources to app developers for tibbr: a comprehensive rundown of the concepts, procedures, and APIs, along with tutorials. Note: This feature requires a separate license. My Posts tab A My Posts tab, configured by the administrator, is now available as the second tab under Main Wall in the left panel. Before, you could view your posts in the Posts tab on the My Profile page only. New gadgets Three new gadgets (Popular Conversations, Popular Subjects, and What s Happening) are now available.

16 6 Release Notes Enhancements in UI We ve beefed up the user interface, including the following: A green icon labeled New next to the poster s name makes a new post more conspicuous. A thin orange line at the top of the post denotes that the subject is private. On subject pages, tibbr displays the drop-down menu for Private Post and Public Post at the bottom of the Post to area. That way, you can also make private posts to users from subject pages. If you access tibbr s notifications on a mobile device, the links to users, subjects, and posts open on that device. On a mouse-over of a subject, tibbr displays its description. On the Leaderboard page under Insight in the left panel, tibbr displays the description on a mouse-over of a person s name. If you click the link to an app on tibbr but have not yet enabled that app, tibbr displays a dialog box (see below for an example) for that purpose. tibbr now displays bigger and higher-resolution images within posts. Multiple images attached to a post or reply are shown in a wide-album format with the total image count as an overlay. The home-page banner stays at the top while you are scrolling on tibbr. Instead of a green bubble to denote the loading progress of the home page, tibbr now displays a green progress bar at the top. tibbr ensures that you do not accidentally close the left panel when you move the mouse from a tab there to its pane. This enhancement smooths out the navigation of the tabs. If you navigate to another area while composing a post, tibbr prompts you to confirm, thus ensuring that you do not lose the text you have typed.

17 New Features 7 Enhancements in performance The following operations are now faster: Logins Wall scrolling Switches between tabs Access of subjects Support for Red Hat Enterprise Linux (RHEL) 6.4 tibbr now also runs on RHEL 6.4. New configuration parameter for support of multiple browser tabs in tibbr Chat A new parameter, support_mutiple_browser_tabs (Chat > Multiple Browser Tabs in the application configuration manager) is available to support multiple browser tabs for tibbr Chat. New SharePoint Web Parts We have added three SharePoint Web Parts: Popular Conversations, Popular Subjects, and What s Happening. Turkish version tibbr is now available in Turkish, making a total of 11 language versions for tibbr: Chinese (Simplified), Dutch, English, French, French (Canada), German, Japanese, Portuguese (Brazilian), Spanish (Mexican), Swedish, and Turkish.

18 8 Release Notes Changes in Functionality This section describes the changes in tibbr s capabilities by release. Release Release contains the following changes in functionality: Notification enhancements Now in place are the following enhancements for notifications: On the Web UI, tibbr now displays notifications up to a maximum limit of 200 characters. You can now track read versus unread notifications: Notifications that you have not read yet are shown in a different background from those you have read. tibbr now displays the image associated with a post as part of the notification. You can mark notifications as read by mousing over their right margin. Propagation of subsubject posts to main subjects By default, posts to subjects and subsubjects are not posted in the related main subjects. tibbr administrators can revert this behavior to the previous one of having subsubject posts propagated to their main subjects. alerts for hidden posts Hiding a post deactivates alerts, if applicable. Posting of calendar events As a convenience, tibbr now attaches ICS files of calendar events to notifications. Left panel We have enhanced the UI in the left panel, as follows: The options under Main Wall (My Wall, VIP Posts, Company Stream, Private Posts, Starred Posts, Chat History, user-name) are now displayed at all times. Mousing over Subjects displays a pane that shows your favorite subjects and those you recently visited. Mousing over People displays a pane that shows the people you visited the most.

19 Changes in Functionality 9 Subject bookmarks The external content that you incorporate into subjects is now called subject bookmarks instead of subject pages. We have correspondingly renamed the related UI elements. Also, while creating a subject bookmark, you can select the option Open in new browser tab to open that bookmark in another tab in the browser. Subject analytics The analytics data that were previously displayed from the Actions > View Insight menu item on a subject is now captured in the Trends tab at the top of the page. Customizations Several directories for the files and parameters for customizing various tibbr UI elements have changed. For details, see the chapter on customization in the tibbr 5.1 Installation and Configuration manual. Release In Release 5.0.2, the files shown under All Files Shared With Me in the tibbr Files app are those in the subjects that you are following. The files in the public subjects that you are not following are not shown. Release Release contains the following changes in functionality: Posting to tibbr by without a target subject now results in a private post on your wall. For the search server, we have separated out a process called zookeeper. When tibbr starts, this process starts automatically and is shown in the output of status.sh. When running multiple instances of the search servers for load-balancing or fault tolerance, be sure to run only one instance of zookeeper. All the search servers must point to that zookeeper process through the argument -DzkHost, as shown in 2_search.sh.

20 10 Release Notes Release Release contains the following changes in functionality: tibbr Ideas app (previously called the Ideation app): tibbr now allows posting of private ideas. You post them on private subjects just like regular tibbr posts. The interface for creating ideas in the Ideas app is now similar to that for creating posts. The editing privileges of the Ideas participants, owners, and contributors have undergone a few revisions. See the addendum at the end of the section on the tibbr Ideas app. You can no longer specify SharePoint folders while creating tibbr subjects. Company Stream is now a common stream for all users in your organization and contains no private posts. After a post, tibbr resets the Post to field with your name only and clears the names of the subjects and people to whom you posted in the previous post. On the Set Up Alerts page, tibbr now displays the counts of the people and subjects for which you have set up alerts instead of the total following counts. After hiding a post, you will not receive notifications on subsequent replies to that post any more. The preview section on new posts to the left of the Filter Posts menu is no longer available. In the case of more than 10 replies to a post, tibbr displays 10 at a time. To see more posts, click View previous replies. We have changed the Tomcat HTTP port numbers from 8080,9080,7080,5080 to 8210,9210,7210,5210 for the webclient, tibbr, apps, and apps-rails3 servers, respectively. Similarly, we have changed the AJP port numbers from 8009,9009,7009,5009 to 8139,9139,7139,5139. tibcast has been discontinued and is no longer integrated with tibbr.

21 Deprecated Features 11 Deprecated Features This section describes the deprecated features (if any), and lists the features, if relevant, that might be useful alternatives to the deprecated features. Any use of a deprecated feature should be discontinued as it may be removed in a future release. You should avoid becoming dependent on deprecated features and become familiar with the suggested alternative features. For details on browser support, see the Readme file. tibbr no longer supports the following features: Customization of event streams Voice memos Oracle Expenses app SAP app Accordingly, we have removed the related documentation from the tibbr How-To Guide and the tibbr Installation and Configuration manual.

22 12 Release Notes Migration and Compatibility For details on how to migrate from a previous release to the current release, see the section Upgrade or Restore in the tibbr Installation and Configuration manual. In addition to performing the migration steps, be sure to run the import_old_notifications utility. Also, after starting tibbr subsequent to the upgrade, do the following: 1. Run this utility in the tibbr_home/scripts directory to create preview images for the existing ones:./tibbr_util.sh refresh_styles Be sure to wait till refresh_styles finishes running before performing steps 2 and Set the parameter resource_preview_point_to_original in the app_config.yml file to false. 3. Restart the tibbr server.

23 Closed Issues 13 Closed Issues The following table describes the issues that were closed in the named releases. Closed in Key Summary Release TIBR-9334 tibbr did not update the group count after sorting a group alphabetically. Scrolling was also problematic TIBR After a user s approval of a request to follow a user with a private profile, tibbr did not notify the requester TIBR In a shared post, even though inactive, the Like and Reply links still displayed the hand icon on a mouse-over, depicting that they were active TIBR A new option is now in place for setting the maximum size of job-runner logs and the number of their rotations TIBR By default, you were offline on tibbr Chat TIBR The See More button in the Action Items pane from the notification window did not work TIBR In the Notifications icon, clicking a user request to follow a private subject displayed an invalid URL TIBR The Popular Conversations pane showed erroneous data TIBR In a multitenant tibbr environment, the template was not customizable for each of the tenants TIBR tibbr did not save its chat history on all multitenant instances TIBR tibbr displayed URLs in multiline posts in an incorrect format TIBR tibbr displayed an unintuitive error message if you attached a file to a post but delayed the posting for longer than the timeout TIBR Refreshing a tibbr app page redirected you to the tibbr home page TIBR You could still create subsubjects even after deselecting the Allow subsubjects to be created under this subject option.

24 14 Release Notes Closed in Release Key Summary TIBR The drop-down pane that was displayed on an entry of keywords in the Search field at the top disappeared while you were clicking the scroll bar. However, scrolling with a mouse device worked TIBR tibbr continued to display the attachments for a deleted post that you had posted to a subject from tibbr Files TIBR On Chrome, accessing unsecured (http) subject pages added through the Managed Pages capability caused a browser warning to the effect that the connection is not fully secure TIBR On Internet Explorer 8 or IE 8 in compatibility mode, mentions after the first one in a post caused the hashtag to be applied to all the text in the post TIBR tibbr did not display bread crumbs (hierarchy links between a main subject and a subsubject) on the wall of subsubjects TIBR tibbr displayed two question marks in a post as a jquery string TIBR Running a script while migrating apps from the local server to the cloud-based server for apps resulted in incorrect resource URLs in the Box app TIBR In a multitenant tibbr environment, mixed-mode authentication for tibbr logins among tenants did not work correctly TIBR Occasionally, a tibbr API returned an incorrect status while concurrently creating subjects or posts within seconds TIBR An error occurred on an upgrade of tibbr to tibbr on the MS SQL Server TIBR The results displayed subsequent to a search of a hashtag far outnumbered those that were shown on the hashtag wall TIBR Occasionally, in case of subject-name conflicts, tibbr could not create a private subject while creating users, causing a discrepancy in the synchronization process for LDAP TIBR You could not download the attachments to tibbr tasks on Internet Explorer 8.

25 Closed Issues 15 Closed in Release Key Summary TIBR The SharePoint gadget did not work for tibbr instances configured for single sign-on TIBR Even with the Marketplace Apps tab disabled, Marketplace apps were still shown under Featured Apps in the right panel TIBR Including special characters in the My Background field in the Basic Information tab in user profiles caused errors in the indexing process TIBR We have added an API for an app to retrieve access tokens through logins: json?client_secret=client_secret&client_id=app_id&login=login TIBR Links to tibbr Pages with anonymous access did not work without a login to tibbr TIBR During the app-creation process, even if you deselected Authenticate in the settings, tibbr still appended authentication parameters to the app s URL TIBR The tibbr Installation and Configuration manual did not document that migrating from release 4.1.x to later versions does not require a regeneration of the styles of your tibbr assets TIBR In Chrome 34, the side scrollbar was not displayed on the tibbr home page for logged-in users TIBR tibbr continued to display a badge count of new posts on your wall even after you had viewed them TIBR Occasionally, scrolling in tibbr while on Chrome was problematic TIBR Loading of subjects, especially those with a large number of subsubjects, was slow TIBR Customization of themes did not work as documented. tibbr now supports themes in a multitenant environment TIBR tibbr-wall updates caused errors, mostly because the number of cache-refill job attempts had reached the maximum allowed.

26 16 Release Notes Closed in Release Key Summary TIBR Even though polish characters were correctly displayed in the Search field, you could not enter them in the Post to field TIBR Clicking the files or other resources posted from tibbr apps resulted in an authorization error TIBR and In a multitenant environment, changing a user s locale did not correspondingly update the language in the UI TIBR Posting to tibbr by did not work after an upgrade to tibbr HF TIBR Running configure.sh resulted in an invalid error message on conflicting tibbr ports TIBR Updates of the wall and of the What s Happening pane ran into problems due to a lock on cache-refill jobs TIBR Uploading a user-profile image that is less than 175 x 175 pixels in size caused the display of an unintuitive error message: 200:success error TIBR tibbr removed global announcements after one day of posting even though they had been configured for manual removal TIBR Removing all the language packs, except English, from the tibbr server resulted in user-access problems TIBR If two hashtags with no space between them were in a post, tibbr erroneously displayed the second hashtag as a link TIBR While tibbr was loading posts on the wall as you scrolled down, clicking a hashtag halted the loading process. Closing the hashtag rendered the wall unscrollable TIBR The number of followers on a subject page did not match that for the subject that was displayed on a mouse-over of the Subjects tab in the left panel TIBR If a user profile was in Italian, tibbr displayed the wrong days of the week for May 2014 in the calendar for specifying a poll s start and end dates.

27 Closed Issues 17 Closed in Release Key Summary TIBR Closing the tibbr Chat window while on a page other than the home page took you to the home page TIBR The Open in Separate Window option in tibbr apps did not work TIBR Newly available is a logout API that does not require a user ID. This issue was part of a previous hotfix. As part of this hotfix, this API returns false instead of outputting a 401 HTTP status code if invoked without an authenticated session TIBR We have added a parameter called include_x509_in_xml_signature to support signing of authentication requests for Security Assertion Markup Language (SAML) TIBR The height in the Announcements pane of the tibbr home page was fixed, resulting in truncation of content TIBR Under Manage Applications in the Administrator tab, choosing Action > View/Edit Users for the Twitter app caused a Role not found error TIBR Hashtags in the Announcements pane were not hyperlinks TIBR The Share on tibbr feature did not work on tibbr Hotfix TIBR Administrators were unable to access the View/Edit Users capabilities for applications in the Administrator tab TIBR Administrators were unable to access subject followers in the Administrator tab TIBR A private subject s nonfollowers could access that subject s attachments by going to their URLs TIBR Occasionally, clicking the Administrator tab caused an error TIBR Changing a public subject with a post that was displayed in the Popular Conversations pane to a private subject did not hide that post TIBR The App Category information was missing after an app import TIBR Occasionally, your LinkedIn Profile was not displayed in the Customization tab on the Edit Profile page. Also, saving a profile sometimes caused an error.

28 18 Release Notes Closed in Release Key Summary TIBR Newly available is a logout API called tibbr_server_url/tibbr/users/logout, which does not require a user ID for logout. If invoked without an authenticated session, this API returns false instead of outputting the 401 HTTP status code TIBR On Internet Explorer 8, JSON text was displayed if tibbr chat for multiple browsers was enabled TIBR Posting to tibbr by without a target subject resulted in a public post instead of a private one TIBR For certain users who were following a large number of private subjects, clicking Company Stream did not result in a display of posts TIBR Migrating from tibbr to tibbr resulted in errors TIBR Configuration steps for the client ID, API key, and so forth in the setup page for cloud apps (Google Drive, Twitter, and Hangout) are no longer required. Ignore those steps TIBR Occasionally, search for new posts did not work and required a server restart as a fix. For more details, see the bullet on zookeeper under Changes in Functionality on page TIBR The preview image in the Announcements pane in the right panel was truncated TIBR Occasionally, the app-runner process hung abruptly, causing a halt in the processing of inbound messages TIBR In the tibbr Tasks app, dragging and dropping tasks from a task list to an empty task list did not work TIBR In the tibbr Tasks app, you could set a task s due date that was later than the due date of the related task list. tibbr now displays a warning in case of such an action.

29 Closed Issues 19 Closed in Release Key Summary TIBR In the tibbr Tasks app, sorting of tasks under Projects and Me occurred in ascending order by date instead of in descending order. The new behavior is as follows: Clicking the Open Tasks or Overdue Tasks menu item results in the tasks being sorted in ascending order. Clicking the Completed Tasks menu item results in the tasks being sorted in descending order TIBR In the tibbr Ideas app, followers of a private subject who were added after the idea was created could not access the ideas posted to that subject TIBR In the tibbr Ideas app, followers who had been removed from a private subject could still access the ideas posted to that subject TIBR Clicking the Continued link of the most popular document under What s Happening redirected you to the tibbr home page instead of expanding the post in question TIBR-1489 Quotation marks were displayed as being garbled in the tibbr mobile version for iphone TIBR tibbr did not display the description of a subject on a mouse-over of the subject name TIBR If you added a group as another owner of a subject, the group members did not receive notifications TIBR Enhancement: We have added a configurable link called My Posts under My Wall in the left panel of the home page TIBR tibbr rendered iframe content incorrectly TIBR tibbr did not support certain HTML tags, such as <Select & Implement> and </select> TIBR Polls remained active after expiration TIBR The section on Solr master-slave configuration in the documentation required an update.

30 20 Release Notes Closed in Release Key Summary TIBR On Internet Explorer 8 and 9 in the tibbr Files app, clicking the More drop-down menu after opening a file caused the Share and Manage items in the menu to move to the top left corner TIBR In the people and subject directories, the two buttons on the right, one labeled with a + symbol and the other with a check-mark symbol, did not feature a tool tip TIBR tibbr truncated profile information under My Background if the text exceeded 125 English characters TIBR The Most Popular Document link in the What s Happening pane did not work TIBR In the Shared on tibbr pane, if a file was shared multiple times, tibbr displayed only the comments on the last-shared file TIBR tibbr displayed user profiles as being 100-percent complete even though they did not contain profile images or titles TIBR tibbr displayed symbols in notifications TIBR Export of calendar events to Lotus Notes Calendar resulted in a mismatch in the date and time TIBR The Google Drive and Box filters under Filter Streams on Wall under Customization on the Edit Profile page did not work TIBR Adding FTP links to a post resulted in an error TIBR The search capability, the See More link under What s Happening, and Company Stream did not work for tibbr administrators TIBR The LinkedIn app on tibbr did not display profile images other than the default TIBR The like count for posts was incorrect because it included multiple likes by the same person, if any TIBR On Internet Explorer 8, replies to posts were misaligned TIBR Under What s Happening in the right panel, the number of users with the most activity was incorrect.

31 Closed Issues 21 Closed in Release Key Summary TIBR On the All Files Shared With Me page in the tibbr Files app, tibbr continued to display the Find By Person drop-down menu even if you had already selected a user name TIBR While you were typing a long post with mention hyperlink, that link floated on a scroll down the post TIBR For SSO authentication in tibbr, OAuth2 redirected you to tibbr s home page rather than the external application you wanted to access TIBR After setting up a WebEx meeting, clicking Start Now multiple times created multiple meetings and related notifications TIBR The settings in the en.yml, ui.yml, and user_meta_details.yml files did not work for multitenancy setup TIBR If you were not logged in, tibbr gadgets opened in a new window in error TIBR tibbr did not display the extensions.doc and.xlsx on a mouse-over of the file attachments in posts TIBR Creating a WebEx meeting in a private post resulted in that post becoming a public one, shared with only a few of its addressees TIBR The application runner stopped processing all inbound in case of issues with an message TIBR The description on mixed-mode support in the tibbr documentation required an update TIBR Choosing Actions > Preview for a Box file that was shared on tibbr caused an error TIBR If a private post met the criteria for popular conversations, tibbr highlighted it in the Popular Conversations pane in the right panel of the home page TIBR An update of the User Bulk API caused a display of the error message private method gsub called for:custom_properties:symbol.

32 22 Release Notes Closed in Release Key Summary TIBR The error message gsub called for:custom_properties:symbol was displayed on a click of the Save button under Basic Information on the Edit Profile page TIBR If you shared a Box file by means of the Share button and then attached the file to a post, the post showed two Download buttons in error TIBR The file-size display for Box files was inconsistent, with some sizes shown in kb and others in mb TIBR tibbr displayed duplicate download links in the Box app s Action menu TIBR While you were updating a group, tibbr did not display a scroll bar for the member list in the Update Group dialog box TIBR The number of subjects shown at the bottom of the My Subjects page did not match the total number of subject on the page because of a double-count of group-related subjects TIBR After you had added a group to a protected subject, the group members could no longer view the posts in that subject TIBR Posting to the main subject from its subsubject, neither of which you were following, resulted in an error. The post went live in the company stream, however TIBR Occasionally, on a subject page, if you voted for a poll option with more than three votes, the ellipsis button that, on a mouse-over, showed the voters from the fourth one onwards became invisible TIBR Accessing files created directly in Google Drive from tibbr caused an error TIBR On the tibbr Files app, tibbr misaligned the counts of files shared on tibbr TIBR For links in posts, tibbr displayed the & symbol in a URL as &amp TIBR tibbr displayed people names multiple times in the Post to field for private posts with addressees that included one or more public subjects TIBR In the Box app, tibbr displayed an incorrect count of comments next to the comments icon on a file upload.

33 Closed Issues 23 Closed in Release Key Summary TIBR In the My Subjects tab, the subject count at the bottom remained unchanged despite a deselection of the Subjects I own checkbox TIBR The section Configuration of Shared Network File System in the tibbr Installation and Configuration manual required an update TIBR The tibbr Release Notes contain an erroneous mention that tibbr supports Microsoft Lync through a configuration parameter. That integration is not, in fact, in place. We've deleted that mention from the Release subsection under Changes in Functionality in this document TIBR Enhancement: We have added an option for mobile devices to overwrite authentication options, for example, saml to default, for organizations that cannot support saml on mobile TIBR Announcements contained options for removing or adding recipients TIBR A hierarchy error occurred if you reactivated a deleted subject in tibbr TIBR In notifications, tibbr ignored line spaces in posts TIBR tibbr continued to display the badge count in the notification window icon even after you had viewed the notifications TIBR The error message translation missing: en-us.user.labels.custom_properties.state was displayed under Basic Information on the Edit Profile page TIBR tibbr displayed login names instead of user names in hourly and daily notifications TIBR In the tibbr Files app, tibbr displayed the associated files for deleted posts.

34 24 Release Notes Known Issues The following table describes the known issues by release. Release Key Description TIBR The tibbr WebEx app does not apply Daylight Savings Time to the start and end times on WebEx notifications attached to events TIBR Clicking certain URLs that are shared through the Share on tibbr bookmark causes an error TIBR Running the refresh_styles script on an upgrade to tibbr causes tibbr to appear to hang TIBR If the MS SQL Server serves as your tibbr database, the tibbr_server.log file sometimes contains this error: Snapshot isolation transaction aborted due to update conflict TIBR On Internet Explorer 8, the pop-up windows of the tibbr tour that are shown when you first log in are misaligned TIBR On Internet Explorer 8, some user names in the Find People field in the Share This Subject with Your Colleagues dialog box are distorted TIBR The See More button in the Action Items pane from the notification window does not work TIBR In the tibbr Ideas app, contributors cannot access ideas if those contributors are not following the ideas subjects. Workaround: Ensure that those contributors follow the subjects in question. Alternatively, create a new subject, add the followers, as appropriate, and post an idea to that subject TIBR The tibbr Salesforce app does not run on Internet Explorer TIBR Search results from Twitter vary from those from Twitter on tibbr TIBR After an LDAP synchronization, tibbr deletes the login names that have different cases in the LDAP and tibbr databases.