Network Computing. Innovative Platforms for Next Generation Networking Infrastructure. Volume 16.1

Transcription

1 Network Computing Innovative Platforms for Next Generation Networking Infrastructure Volume

2 1

3 Lanner s Leadership in Network Appliance Cloud computing and high-speed mobile communications networks are bringing significant increases to Internet traffic, which places an enormous workload onto network appliances. However, the trends are attracting increasing volume of sophisticated and well-prepared malware, viruses, and other information security risks. Therefore, service providers and infrastructure owners are demanding innovative, nextgeneration platforms driven by high-performance and high-throughput processors to build into firewalls and other hardware security appliances in order to perform deep packet inspection and virus scanning in a thorough and swift manner. Lanner has been dedicated in the rapid-growing information security industry for over three decades, and has remained the leadership in supplying innovative and next-generation hardware platforms with advanced architectures. According to Gartner Magic Quadrants, there are 46 companies supplying Enterprise Network Firewalls, UTM, Wired/ Wireless LAN, WAN optimization and Application Delivery. Among the 46 companies, 39% use hardware made by Lanner. By 2011, Lanner had shipped over a million networking appliances, reaching a significant corporate milestone. This demonstrates Lanner s strong commitment in designing superior network platforms in the field. For two consecutive years since 2015, Lanner has won four Taiwan Excellence Awards trophies for its networking platforms. As the industry requires higher quality, more advanced and more powerful network appliances, we will continue our expertise, and will support our clients and partners in full dedication so we can all grow together. Terence Chou Senior Director, Network Computing Product Division 2

4 About Lanner Lanner Electronics Inc. (TAIEX 6245) is a world-leading hardware provider in design, engineering, and manufacturing services for advanced network appliances and rugged industrial computers. With 30-year experiences, Lanner provides reliable and cost-effective computing platforms with high quality and performance. Today, Lanner has a large and dynamic manpower with approximately 900 well-experienced employees worldwide with the headquarters in Taipei, Taiwan and subsidiaries in the US, Canada, and China. Global Manufacturing Capabilities Taipei, Taiwan Area 30,000 m² 3 x SMT, DIP and assembly lines Production capacity: 30,000 system units/month Beijing and Dongguang, China Area 15,200 m² 5 x Assembly lines Production capacity: 8,000 system units/month Service Capabilities Custom design and production in board, chassis and system High mix low volume manufacturing Quality assurance services Global order fulfillment services Certifications ISO 9001:2008 ISO 14001:2004 ISO 28000:2007 IECQ QC RoHS OHSAS 18001:2007 Contents About Lanner...3 Why Lanner?...4 Design and Manufacturing Services...5 x86 Network Appliances (FW/NCA Series)...8 Network Processing Cards...18 Telecom Network Appliances (FX/HCP/HTCA Series)...21 Network Processor Platforms (MR Series)

5 Why Lanner? Lanner has the leading technological advantages and long-established manufacturing processes to service clients with customized solutions for mission-critical applications. Lanner possesses well-managed manufacturing lines, and is capable of customizing both hardware and software parts of a platform, including chassis, dimensions, modular/fixed ports, BIOS, IPMI, acceleration cards, NIC modules, and required certifications. Strong Allies Lanner s membership in industrial-leading alliances enables us to provide the latest technology, and extend your product lifecycles. Intel Lanner is an Associate Member of the Intel Network Builders Partner, a community of SDN/NFV developers, system integrators, OEMs and solution providers committed to the development of modular, standards-based solutions on Intel technologies. Partner Freescale Semiconductor Lanner is a member of the Freescale Alliance, taking advantage of Freescale network processors for better performance in IPS, DPI and cryptographic acceleration. EZchip/Tilera EZchip/Tilera Corporation is a fabless semiconductor company committed to delivering unparalleled computational performance with extremely low power consumption. NETWORKS Cavium Networks Lanner s MR Series of MIPS RISC network processing appliances use the latest processors from Cavium. Network Intelligence Alliance Lanner joined the Network Intelligence Alliance to facilitate the integration and deployment of network intelligence technology in new, innovative solutions for improving the performance, security and monetization of communications networks. Netronome Lanner is a platform partner with Netronome. We are benefited from Netronome s innovative solutions in software defined technologies. We work closely with Netronome to provide scalable solution in Lanner s network appliances. Broadcom Broadcom is a global innovator and leader in semiconductor solutions for wired and wireless communications. Lanner offer products with processors from Broadcom. 4

6 Design and Manufacturing Services Wide Customization Options Lanner supplies customized hardware solutions for mission-critical applications with managed manufacturing process thanks to our in-house design and manufacturing services. Advanced Networking Features Support for up to 66 network ports 10/100/1,000/10,000/40,000 Mbps Ethernet Copper and fiber at 10GbE, 40GbE, 100GbE Advanced LAN bypass solutions Higher throughput due to wider PCIe lanes, DDR4 memory and Intel architecture advancements. Best-In-Class Port Density Lanner has engineered unprecedented port density for our 2U network appliances. Utilizing our modular or blade technology, each platform can be configured to your optimal requirements. Engineered for Reliable Operation With redundant power sources, hot-swappable fans, and LAN bypass, these network appliances will continue to support your network even when the unexpected occur. The Latest and Fastest Processors The latest Intel Xeon, Core, Celeron and Atom processors perform network security functions at optimal throughput while at low power. Lanner also designs with Tilera, Cavium, Freescale and Marvell processors to provide RISC based network platforms. Electronic Engineering Choose from an array of board and platform level components to create the perfect appliance or solution based on your application requirements. Lanner s strategic partnerships allow us to incorporate the latest technology in the industry to provide customers with a richer palette of options. Mechanical Engineering Lanner s engineers are wellversed in tackling the multitude of design issues faced on the board and mechanical level including ventilation, peripherals, and more. Rigorously tested, Lanner products can withstand a broad range of environmental parameters to guarantee product robustness in an array of applications. Software Engineering Implement the necessary BIOS or firmware into your platforms with the help of Lanner s software team. Our software development expertise can create and customize the necessary BIOS, firmware, drivers and API level, to ensure seamless communication between hardware and application software

7 Lanner s Complete Range of Network Appliances Lanner possesses a wide range of network appliances including budget desktop firewalls with onboard processors, and also advanced hybrid appliances with multiple processors, several expansion options, and reassuring redundancy features. Lanner offers both x86 and RISC appliances that can come with a range of acceleration cards and expansion modules to form the perfect appliance. 200 Gbps Carrier, ISP & Cloud Computing Enterprise HTCA and HCP Series 20 Gbps SMB FX Series 1 Gbps FW-7500 / 8700 Series NCA-4000 / 5200 Series NCA-1000 Series FW-8800 and NCA-5500 Series MR-600 / 700 Series MR-300 Series FW-7500 Series Prototyping During the prototype stage, Lanner can help you with testing guidelines and BIOS tuning to maximize the performance of your appliance. Lanner has a wide range of standard appliances that can speed up your product development and brings your product to the market faster. Product Identity Service Take advantage of Lanner s product identify service. Lanner can customize the identity of your products, everything from industrial design of 2D and 3D faceplates to custom packaging and labeling. This ensures that your product accurately promotes your brand awareness and leaves a lasting impression with your customers. Manufacturing Lanner owns and operates its own in-house state-of-the-art SMT, DIP, assembly and testing facilities. By maintaining control of the entire manufacturing process, we ensure the integrity of your end product through our tight production procedures, integrated quality assurance programs and rigorous design quality. 6

8 Global Order Fulfillment and RMA Worldwide Offices With our presence in various continents, we are able to serve our clients worldwide. Fremont Toronto Tel Aviv Beijing Taipei A Complete Service After we have designed and manufactured your products, we install the required software and ship directly to your customers in your branded packages. Drop shipments can be arranged from our logistics centers worldwide. Our service allows you to focus on your core competency of software development for the information security industry. We take care of the hardware design, manufacturing, logistics and service. That s our core competency. Quality Control Lanner s strict and ISO 9001-certified quality testing procedures have been adjusted to comply with standards. Also, as part of our green management plan, initiated early 2006, all Lanner products meet RoHS certification requirements. Logistics Successful logistics are reinforced by efficient procedures. Lanner clients orders can be tracked through the production process by specific numbers allowing for routine project updates.order traceability can guarantee consistency and quality. Technical Support Lanner provides full RMA service and technical support to fulfill customer service. For the systems built with Intel platforms, we offer up to 7-year lifecycle support. Longer lifecycle support can also be arranged by jointly planned inventories. 7

9 x86 Network Appliances (FW/NCA Series) 8 NIC Modules 8 NIC Modules + 2 Swappable Drive Bays Dual Intel Xeon CPUs FW DDR4 DIMM Redundant Power 4 Modular Fans Introduction to our FW and NCA Series Lanner s FW Series of x86 network appliances are known worldwide for its reliability and flexibility. Industry leaders in enterprise firewalls, UTM, WAN optimization, application delivery, and other information security providers have used the FW series for their hardware requirements for decades. The new NCA Series inherits our successful FW Series and is abbreviated with a new naming scheme Network Communication Appliance. The new NCA adopts the latest CPU/Chipset platform for network computing. FW-8800 and NCA-5500 Series The FW-8800 and NCA-5500 Series consist of 1U and 2U rackmount network appliances with extremely powerful Intel Xeon processors for demanding network applications. There are also extra redundancy features like hot-swappable system fans and multiple Ethernet module bays for flexible port configuration. The FW-8800 and NCA-5500 Series are ideal for DDoS, enterprise UTM, enterprise firewalls, intrusion prevention systems (IPS), application delivery and WAN optimization. FW

10 Feature Highlights FW-8700 and NCA-5200 Series The FW-8700 and NCA-5200 Series consists of 1U rackmount network appliances with 1 or 2 NIC module slots and mid-range Intel processors. Both Series are widely used platforms for UTM, firewalls, VPN, IPS and WAN optimization. FW-7500 and NCA-4000 Series The FW-7500 and NCA-4000 Series consists of desktop and 1U rackmount network appliances with entry-level x86 Intel processors. The two product lines are suitable for SMB UTM, firewalls, VPN, IPS and WAN optimization. The small form factor of the desktop models in the FW-7500 Series enables easy deployment where rack space is limited. Though in compact form factor, there is sufficient processing power to run barebones network security and communication applications, and ultra-low power consumption means an environmentally-friendly appliance with a low thermal foot print. LAN Bypass Bypass ports allow uninterrupted network traffic even if a single in-line appliance is shut down or hangs. Lanner s engineers have improved on standard bypass functionality to provide higher reliability and greater control. The following table highlights the generations of bypass and their specific functions. LAN Bypass Gen 1-3 Comparison Gen 1 Gen 2 Gen 3 No Hardware Jumper required to enable Bypass No Yes Yes Remote Bypass Control No Yes Yes Multiple watchdogs dedicated for different bypass pairs Bypass control in 3 distinct states: power-on, just-on and system off No packet loss if bypass is enabled during system just-on state Bypass implementation independent of Intel architecture platform of the host system No No Yes No No Yes No No Yes No No Yes Intel Xeon CPU The Intel Xeon processor series provides Intel Virtualization Technology for flexible virtualization, as well as Intel QuickPath Technology, Intel Turbo Boost Technology and Intel Hyper-Threading Technology. Intel QuickAssist Technology As the complexity of networking and security applications continues to grow, systems need more and more computing power for workloads, including cryptography, data compression, and pattern matching. Intel QuickAssist Technology is designed to optimize the use and deployment of algorithm accelerators in these kinds of applications. For more information on Lanner s advanced bypass technology, please see our white paper The Evolution of LAN Bypass Technology: Lanner s Generation One to Generation Three Bypass at Lanner Intel-based NIC Modules Enhance the performance and bandwidth of your network appliance according to your needs with these front-facing and easily swapped modules. Choose from over 20 different Ethernet network modules, including RJ-45 copper, fiber, bypass and speeds from 1GbE, 10GbE to 40GbE. For an overview of the NCM modules, please see the section about NIC modules. NCS2-IXM407A: Slim type 4-port 10GbE Fiber Module 9

11 Hot-Swappable System Fans Hot-swappable technology is vitally important to the networking industry, where downtime is costly and tarnishes reputations. Fans are usually the first component to fail in any computer or dedicated appliance due to their mechanical nature and constant use. Many Lanner appliances have a series of cooling fans along the rear panel that cools the entire system. When one of these fans fails, network technicians can replace it easily with Lanner s hot-swappable fans. Intel DPDK All Lanner s Intel x86-based network computing appliances are fully compatible with Intel DPDK, as long as the processor is built in multi-core. Intel DPDK may also work on Lanner network appliances with single-core Intel CPU if the processor is designed with Hyper Threading technology. For more information on Lanner s advanced DPDK technology support, please see our white paper Accelerating Ethernet Performance and Throughput with Intel DPDK Redundant Power Supplies Many top-of-the-line network appliances utilize dual power supplies to ensure a constant flow of power. These appliances need to run 24/7 and every failure can cost tremendously. Therefore, smart network maintenance experts utilize dual power supplies to make sure these appliances never fail. Trusted Platform Module (TPM) Lanner Trusted Platform Module (TPM) provides the hardware security and secure boot with the cost effective solution to build up the best value system for mission critical application like finance, banking, healthcare, or military. This hardware assisted mechanism prevents hackers from stealing data through the network. All operations will keep records for tracking. The TPM module (IAC-TPM) can be optionally purchased for compatible models. For more information, please contact Lanner. Cavium Nitrox Security Acceleration Processor Depending on the SKU chosen, Lanner network appliances may come with Cavium Nitrox security acceleration processor. The Cavium Nitrox makes it the perfect solution for applications such as integrated VPN/Firewall appliances, load balancers, WAN optimization, application delivery controller, UTM gateway and server offload. NETWORKS Support for Acceleration Cards By using the PCI slot you can install one of the many Lanner acceleration cards with Intel, Cavium or Tilera network processors. This provides highperformance tunneling and encryption for services like VPN. IPMI Remote Manageability With Lanner s IPMI add-on card, network appliances can be managed at a central location remotely to configure, monitor, reboot and shut down through IPMI. The card features SSL encryption, and comes with a SDK so you can create a custom management console for your appliance. 10

12 Newly Announced x86 Network Appliances Feature Description NCA-1020 FW-7526 NCA-4010 Form Factor Desktop Desktop 1U Rackmount Platform Processor Options Intel Pentium /Celeron N3000 (Braswell) 2-core Intel Atom C2308/C2508 (Rangeley) Chipset SoC SoC SoC Intel Xeon processor D-1500 series (Broadwell-DE) BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS Technology DDR3L 1600 MHz, non-ecc DDR MHz, 1.5 V, non-ecc DDR MHz, ECC Registered System Memory Max. Capacity 8 GB 8 GB 32GB (2 x 16GB DIMMs) Socket 1 x 204-pin SODIMM 1 x 204-pin SODIMM 2 x 288-pin DIMM OS Support Windows 7, Windows 8, WES 7, WES 8, Linux (Fedora 18/Yocto) Linux Kernel 2.6 or above Linux Kernel 2.6 or above, Windows 7, Windows 2008 Server Storage HDD Bays N/A 1 x 2.5 SSD bay (SSD is not included) Compact Flash 1 x msata mini 1 x msata 1 x msata 1 x 2.5 or 2 x 2.5 HDD drive bays (harddrive is NOT included) Ethernet Ports 3 x RJ45 GbE 4 x RJ45 GbE + 2 x SFP GbE 8 or 16 x RJ x SFP+ Bypass 1 pair Gen.3 1 pair Gen.2 3 pairs Gen.3 Networking Controllers 3 x Intel i211 2 x Intel i210-is, Intel SoC Integrated i354 with Marvell 88E1543 PHY NIC Module Slot N/A N/A 1 Intel i210at or i350-am4 Management Port N/A N/A N/A Security Acceleration N/A Intel QuickAssist Technology N/A Reset button 1 x reset button, Software reset by default 1x reset button, Software reset by default 1x reset button, Software reset by default I/O Interface Console 1 x RJ45 1 x RJ45 1 x RJ45 USB 1 x USB 2.0, 1 x USB x USB x USB 3.0 OPMA slot N/A N/A Yes Expansion PCIe 1 x Mini-PCIe 1 x Mini-PCIe Optional rear expansion PCI-E slot PCI N/A N/A N/A Processor Passive CPU heatsink Passive CPU heatsink Passive CPU heatsink Cooling System Fanless Fanless 2 x cooling fans Environmental Parameters Temperature, ambient operating / storage Humidity (RH), ambient operating / ambient non-operating 0 ~ 40ºC / -20 ~ 70ºC 0 ~ 40ºC / -20 ~ 70ºC 0 ~ 40ºC / -20 ~ 70ºC 5~90%, non-condensing 5~90%, non-condensing 5~90%, non-condensing LCD Module N/A N/A Character LCM with keypad Miscellaneous Watchdog Yes Yes Yes Internal RTC with Li Battery Yes Yes Yes Physical Dimensions Power Dimensions (WxHxD) x 19.4 x mm 177 x 44 x mm 438 x 44 x 321 mm Weight 0.5 kg 1.2 kg 6 kg Type / Watts 36W power adapter 36W or 60W power adapter (by SKU) ATX 220W single PSU Input AC 100~240V@50~60 Hz AC 100~240 Hz 90~264@47~63Hz Approvals and Compliance CE Class B, FCC Class B, RoHS, UL RoHS CE, FCC, RoHS 11

13 NCA-4210 NCA-5210 NCA U Rackmount 1U Rackmount 1U Rackmount 6th generation Intel Core processor (Skylake) 6th generation Intel Core processor (Skylake) 1 x Intel Xeon E v3/v4 Series on LGA2011-R3 (Haswell/Broadwell-EP) Intel H110 or C236 Series Chipset Intel C236 Series Chipset Intel C612 Chipset AMI SPI Flash BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS DDR MHz, ECC Support (C236 Only) DDR MHz, ECC or non-ecc DDR MHz, Registered ECC 32GB (2 x 16GB DIMMs) 64GB (4 x 16GB DIMMs) 256 GB 2 x 288-pin DIMM 4 x 288-pin DIMM 8 x 288-pin DIMM Linux Kernel 2.6 or above, Windows 7, Windows 2008 Server Linux Kernel 2.6 or above, Windows 7 Pro, Windows 8 Linux Kernel 2.6 or above, Windows 7, Windows 2008 Server 1 x 2.5 or 2 x 2.5 HDD drive bays (harddrive is NOT included) 1 x 2.5 or 2 x 2.5 HDD drive bays (harddrive is NOT included) 1 x 3.5 or 2 x 2.5 HDD drive bays (Harddrive is NOT included) 1 x msata 1 x msata 1 x CFast 6 x RJ45 or 6 x RJ x SFP default 8 or 12 GbE RJ x SFP 33 GbE ports maximum 2 pairs Gen.3 4 or 6 pairs Gen.3 Depends on NIC module specifications Intel i210at/i210is Intel i210at or i350-am4 1 x Intel i210at 1 2 or 4 4 N/A 1 1 N/A N/A N/A 1 x reset button, Software reset by default 1x reset button, Software reset by default 1x reset button, Software reset by default 1 x RJ45 1 x RJ45 1 x RJ45 2 x USB x USB x USB 2.0 Yes Yes Yes Optional rear expansion PCI-E slot Optional rear expansion PCI-E slot (By project) N/A N/A N/A N/A Passive CPU heatsink Passive CPU heatsink CPU heatsink with fan duct 3 x cooling fans 4 x cooling fans 4x independent hot-swappable cooling fans with smart fan control 0 ~ 40ºC / -20 ~ 70ºC 0 ~ 40ºC / -20 ~ 70ºC 0 ~ 40ºC / -20 ~ 70ºC 5~90%, non-condensing 5~90%, non-condensing 5% ~ 90%, non-condensing Character LCM with keypad Character LCM with keypad Character LCM with keypad (Graphic optional) Yes Yes Yes Yes Yes Yes 438 x 44 x 321 mm 438 x 44 x 525 mm 438 x 44 x 580 mm 6 kg 18 kg 16 kg ATX 220W single PSU ATX 300W redundant power supply units 1+1 ATX 300W redundant power supply units 90~264@47~63Hz 90~264@47~63Hz AC 90~264 V@47~63Hz CE, FCC, RoHS CE, FCC, RoHS CE Class A, FCC Class A, RoHS 12

14 Entry to Mid-Range x86 Network Appliances Feature Description NCA-1010 FW-7525 FW-5330 FW-7543 FW-7551 Form Factor Desktop Desktop Desktop Desktop Desktop Platform Processor Options Intel Atom E3815/3825 (Bay Trail) 2/4-core Intel Atom C2358/C2518 (Rangeley) AMD T24L 1G Intel Atom E3815 or Celeron J1900 Intel Atom SoC- C2358(2-core)/C2518 (4-core)/C2758 (8-core) Chipset SoC SoC AMD A50M SoC SoC BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS System Memory Technology DDR3L 1067 MHz non-ecc DDR MHz, 1.5 V, Non-ECC DDR MHz J1900: DDR3L- 1333, E3815: DDR3L V Only Max. Capacity 8 GB 8 GB 4 GB 8 GB 8 GB DDR3 1333/1600 MHz ECC Only, 1.5V Socket 1 x 204-pin SODIMM 1 x 204-pin SODIMM 1 x 204-pin SO-DIMM 1 x 204-pin SODIMM 1 x 204-pin SODIMM OS Support Windows 7, Windows 8, WES 7, WES 8, Linux (Fedora 18/ Yocto) Linux Kernel 2.6 or above Linux Kernel 2.6 or above Win 7, WES 7, Win 8, WES 8, WEC 7, Linux (Fedora 18/Yocto) Linux kernel 2.6 or above Storage HDD Bays N/A 1 x 2.5 (SSD is not included) Compact Flash 1 x msata mini 1 x CF card Type II 1 x 2.5 (Optional) 1 x 2.5 (Optional) 1 x 2.5 (Optional) 1 x Type II CompactFlash / CF SATA support 1 x Type II CF (Optional) 1 x Type II CompactFlash Ethernet Ports 3 x RJ45 GbE 4 or 6 x RJ45 GbE 2 or 4 x GbE RJ-45 4 x GbE RJ-45 4 or 6 x GbE RJ45 Bypass N/A 1 pair Gen.2 (Optional) N/A N/A 2 pairs Gen2 (Optional) Networking Controllers 3 x Intel i211 2 x Intel i210at, Intel SoC Integrated i354 with Marvell 88E1543 PHY 4 x Realtek RTL8111E or 2 x Realtek RTL8111E 4 x Intel i211 2 x Intel i210at, Intel SoC Integrated i354 with Marvell 88E1543 PHY NIC Module Slot N/A N/A N/A N/A N/A Management Port N/A N/A N/A N/A N/A Security Acceleration N/A Intel QuickAssist Technology N/A N/A Intel QuickAssist Technology Reset button 1 1x reset button Software reset by default 1 x reset button Software reset by default 1 x reset button Software reset by default 1 x reset button Software reset by default I/O Interface Console 1 x RJ45 1 x RJ45 1 x RJ-45 1 x RJ-45 1 x RJ-45 USB 1 x USB 2.0, 1 x USB x USB x USB x USB x USB 2.0 OPMA slot N/A N/A N/A N/A N/A Expansion Cooling PCIe 1 x Mini-PCIe 1 x Mini-PCIe 1 x Mini-PCIe (Reserved for ODM only) PCI N/A N/A N/A N/A N/A N/A 1 x Mini-PCIe (By Project) Processor Passive CPU heatsink Passive CPU heatsink Passive CPU heatsink CPU heatsink CPU heatsink System Fanless Fanless 1 x cooling fan 1 x cooling fan 1 x cooling fan with smart fan Environmental Parameters Temperature, ambient operating / storage Humidity (RH), ambient operating / ambient non-operating 0 ~ 40ºC / -20 ~ 70ºC 0 ~ 40ºC / -20 ~ 70ºC 0 ~ 40º C / -20~70º C 0 ~ 40º C / -20~70º C 0 ~ 40º C / -20~70º C 5~90%, non-condensing 5~90%, non-condensing 5 ~ 90% non condensing / 5 ~ 90% non condensing / 5 ~ 90% non condensing / LCD Module N/A N/A N/A N/A N/A Miscellaneous Watchdog Yes Yes Yes Yes Yes RTC Li Battery Yes Yes Yes Yes Yes Physical Dimensions Dimensions (WxHxD) x 19.4 x mm 177 x 44 x mm 240 x 44 x 166 mm 231 x 44 x 176 mm 231 x 44 x 200 mm Weight 0.5 kg 1.2 kg 1.2kg 1.2 kg 1.2 kg Power Type / Watts Input 36W power adapter AC 100~240V@50~60 Hz SKU A/B: 36W power adapter, SKU C:60W power adapter AC 100~240 Hz 12V 3A 36W Power Adapter AC Hz 12V 3A 36W Power Adapter AC Hz 12V 3A 36W Power Adapter AC Hz Approvals and Compliance 13 CE Class B, FCC Class B, RoHS, UL CE Class B, FCC Class B, RoHS, UL CE, FCC Class A, RoHS CE, FCC Class A, RoHS CE, FCC Class B, RoHS

15 FW-7571 FW-7573 FW-7584 FW-7585 UP U Rackmount 1U Rackmount 1U Rackmount 1U Rackmount Intel Atom C core SoC Intel Atom C core or C core SoC 4th Generation Intel Core processor i7/i5/i3 or Celeron series on LGA1150 4th Generation Intel Core processor i7/i5/i3 or Celeron series on LGA1150 Intel Atom C2758 (Rangeley) SoC SoC Intel H81 Intel C226 Marvell Prestera 98DX3035 switch solution AMI SPI Flash BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS AMI SPI Flash BIOS DDR3 1333/1600 MHz DIMM, ECC or non-ecc, 1.5V/1.35V Dual Channel DDR3 1333/1600 MHz DIMM, ECC or non-ecc, 1.5V/1.35V Dual-channel DDR3/DDR3L 1066/1333/1600 MHz, un-buffered, non-ecc, 1.5V/1.35V Dual-channel DDR3/DDR3L 1066/1333/1600 MHz, un-buffered, non-ecc, 1.5V/1.35V DDR MHz, ECC 8 GB 16 GB 16 GB 16 GB 16 GB 2 x 240-pin DIMM 2 x 240-pin DIMM 2 x 240-pin DIMM 2 x 240-pin DIMM 2 x 204-pin SODIMM Linux kernel 2.6 or above Linux kernel 2.6 or above Windows 7,8,2000, XP, Vista, Server 2008, 2012, Linux Kernel 2.6 or above Windows 7,8,2000, XP, Vista, Server 2008, 2012, Linux Kernel 2.6 or above Linux Kernel 2.6 or above 2 x 2.5 or 1 x 3.5 (Optional) 2 x x 2.5 (1 x 3.5 reserved) 2 x 2.5 (1 x 3.5 reserved) 1 x SATA 3.0 connector (Reserve only) 1 x Type II CompactFlash 1 x Type II CompactFlash 1 x Type II CompactFlash 1 x Type II CompactFlash 1 x CF Card Type II 4 or 6 x GbE RJ-45 6 x GbE RJ-45 default 14 x GbE RJ45 maximum 6 x GbE RJ45 8 x GbE RJ45 24 x GbE ports onboard (8 with PoE) + 2 x 10G SFP+ 2 pairs Gen3 (Optional) 3 pairs Gen3 (Optional) 3 pairs Gen3 (Optional) 3 pairs Gen3 N/A 2 x Intel i210at, Intel SoC Integrated i354 with Marvell 88E1543 PHY 2 x Intel i210at, Intel SoC Integrated i354 with Marvell 88E1543 PHY 6 x i210at 1 x i x i210at 10G: Intel 82599EB, 1G: Marvell 88E1685 N/A 1 N/A N/A N/A N/A N/A N/A 1 1 Intel QuickAssist Technology Intel QuickAssist Technology N/A N/A Intel QuickAssist Technology 1 x reset button Software reset by default 1 x reset button Software reset by default 1 x reset button Software reset by default 1 x reset button Software reset by default 1x reset button Software reset by default 1 x RJ-45 1 x RJ-45 1 x RJ-45 1 x RJ-45 1 x RJ45 2 x USB x USB x USB x USB x USB 2.0 N/A N/A N/A N/A N/A 1 x PCI-E*8 expansion (optional) 1 x PCI-E*8 expansion module 1 x PCI-E*8 expansion (optional) 1 x PCI-E*8 expansion (optional) N/A N/A N/A N/A N/A N/A CPU heatsink CPU heatsink CPU heatsink with fan duct CPU heatsink with fan duct CPU heatsink 1 x cooling fan with smart fan 1 x cooling fan with smart fan 2 x cooling fans with smart fan 2 x cooling fans with smart fan 2x cooling fan with smart fan control 0 ~ 40º C / -20~70º C 0 ~ 40 C / -20 ~ 70 C 0 ~ 40 C / -20 ~ 70 C 0 ~ 40 C / -20 ~ 70 C 0 ~ 40º C / -20~70º C 5~90%, non-condensing N/A 2 x 20 character 2 x 20 characters 2 x 20 characters N/A Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 431 x 44 x 305 mm 431 x 44 x 305 mm 431 x 44 x 305 mm 431 x 44 x 305 mm 431 x 44 x mm 4 kg 4 kg 7 kg 7 kg 8.2 kg 1U ATX PSU 100 W 1U ATX PSU 150 W 1U ATX PSU 220 / 150 W 1U ATX PSU 220 / 150 W 500W ATX power supply unit AC Hz AC 100~240 AC Hz AC Hz AC 100~240V, 50~60Hz, 7-3.5A CE, FCC Class A, RoHS, UL CE, FCC Class A, RoHS, UL CE Class A, FCC Class A, RoHS CE Class A, FCC Class A, RoHS CE Class A, FCC Class A, RoHS 14

16 Mid-range to High Performance x86 Network Appliances Feature Description FW-8759 FW-8771 FW-8877 Form Factor 1U Rackmount 1U Rackmount 1U Rackmount Platform Processor Options 4th Generation Intel Xeon E v3,core processor i7/i5/i3 series on LGA1150 (Haswell) 4th Generation Intel Xeon processor E v3, E v3 and other LGA1150 processors (Haswell) Intel Xeon processor E series on LGA2011 (Sandy / Ivy Bridge-EP) Chipset Intel C226 Intel C226 Chipset Intel C604 BIOS AMI BIOS 64Mb SPI Flash ROM AMI BIOS 64Mb AMI BIOS 64Mb System Memory Technology Dual-channel DDR3/DDR3L 1066/1333/1600 MHz, un-buffered, ECC or non-ecc, 1.5V/1.35V Dual-channel DDR / 1333 / 1600 MHz unbuffered, ECC or non-ecc 1.5V/1.35V Max. Capacity 16 GB 32 GB 64 GB Quad-channel DDR3 800/1066/1333/1600 MHz (Registered ECC or unbuffered, ECC or non-ecc), 1.5V Socket 2 x 240P DIMM 4 x 240-pin DIMM 8 x 240-pin DIMM OS Support Windows 7,8,2000, XP, Vista, Server 2008, 2012, Linux Kernel 2.6 or above Windows 7,8,2000, XP, Vista, Server 2008, 2012, Linux Kernel 2.6 or above Windows 7,8, Server 2008, 2012, Linux Kernel 2.6 or above Storage HDD Bays 2 x 2.5 (1 x 3.5 reserved) 2 x x 3.5 or 2 x 2.5 Compact Flash 1 x Type II CompactFlash 1 x CFast 1 x Type II CompactFlash Ethernet Ports 8 x GbE RJ-45 default 16 x GbE ports maximum 8 x GbE RJ-45 default, 24 GbE ports maximum 1 x GbE RJ-45 default, 33 GbE ports maximum Bypass 3 pairs Gen.3 3 pairs Gen.3 Depends on NIC module specifications Networking Controllers 1 x Intel i217, 7 x Intel i210at 8 x Intel i210 1 x Intel i210 NIC Module Slot 1 N/A or 2 4 Management Port 1 x GbE RJ-45 1 x GbE RJ-45, share with IPMI port 1 x GbE RJ-45 Security Acceleration N/A N/A N/A Reset button 1 x reset button Software reset by default 1 x reset button Software reset by default 1 x reset button Software reset by default I/O Interface Console 1 x RJ-45 1 x RJ-45 1 x RJ-45 USB 2 x USB x USB x USB 2.0 OPMA slot By Project Yes Yes Expansion PCIe 1 x PCI-E*8 expansion for NIC Module 1 x Low-profile PCI-E*8 (optional) 2 x PCI-E*8 golden finger for Ethernet module or expansion slot (optional) 1 x PCI-E*8 expansion (Optional) PCI N/A N/A N/A Cooling Processor CPU heatsink with fan duct CPU heatsink with fan duct CPU heatsink with fan duct System 3 x cooling fans with smart fan control 3 x cooling fans with smart fan control 4 x independent hot-swappable cooling fans with smart fan control Environmental Parameters Temperature, ambient operating / storage Humidity (RH), ambient operating / ambient non-operating 0 ~ 40º C / -40~70º C 0 ~ 40º C / -20~70º C 0 ~ 40 C / -20 ~ 70 C LCD Module 2 x 20 characters 2 x 20 characters 2 x 20 characters Miscellaneous Watchdog Yes Yes Yes Internal RTC with Li Battery Yes Yes Yes Physical Dimensions Power Dimensions (WxHxD) 431 x 44 x 415 mm 431 x 44 x 468 mm 438 x 44 x 580 mm Weight 10 kg 7 kg 18 kg Type / Watts 220 W single power supply or redundant 300 W PSUs 270 W single power supply or redundant 300 W PSUs 1+1 ATX 400W redundant powers Input AC Hz AC Hz AC 90~264V@47~63Hz Approvals and Compliance CE emission, FCC Class A, RoHS CE emission, FCC Class A, RoHS CE Class A, FCC Class A, RoHS, UL 15

17 FW-8893A / FW-8893C FW-8894 FW-8895 FW U Rackmount 1U Rackmount 2U Rackmount 2U Rackmount 2 x Intel Xeon E Series up to 95W on LGA2011(Sandy / Ivy Bridge-EP) 2 x Intel Xeon E v3/v4 Series on LGA2011-R3 (Haswell/Broadwell-EP) 2 x Intel Xeon E series on LGA2011 (Sandy / Ivy Bridge-EP) 2 x Intel Xeon E v3/v4 Series on LGA2011-R3 (Haswell/Broadwell-EP) Intel DH8920CC / DH8950 Intel C612 Chipset Intel C600 series Intel C612 Chipset AMI BIOS 64Mbit SPI Flash ROM AMI SPI Flash BIOS AMI BIOS 64Mbit SPI Flash ROM AMI SPI Flash BIOS Quad-channel DDR3 1066/1333/1600 MHz Registered or unbuffered, Support ECC, 1.5V DDR MHz, Registered ECC Quad-channel DDR3 1333/1600 MHz, Registered ECC or non-ecc, 1.5V DDR MHz, Registered ECC 128 GB 512 GB 128 GB 512 GB 16 x 240P DIMM 16 x 288-pin DIMM 16 x 240P DIMM 16 x 288-pin DIMM Linux Kernel 2.6 or above Linux Kernel 2.6 or above, Windows 7, Windows 2008 Server Windows 2003/2008 Server, Linux kernel 2.6 or above Linux Kernel 2.6 or above, Windows 7, Windows 2008 Server 1 x x 3.5 or 2 x 2.5 HDD drive bays (Harddrive is NOT included) 2 x 3.5 (SKU A/B) or 4 x 3.5 (SKU C/D) FW-8896A/B/C/D: 1 x 3.5 internal drive bays, optional 2 x 2.5, FW-8896E/F/G/H:2 x 2.5 external drive bays 1 x Type II CompactFlash 1 x CFast 1 x Type II CompactFlash 1 x CFast 14 or 10 x GbE RJ-45 default 6 x GbE 10G SFP+ Cage 1 x GbE RJ-45 default 33 x GbE RJ45 maximum 1 x GbE RJ-45 default 65 x GbE RJ45 maximum 1 x GbE RJ-45 default 65 GbE ports maximum 4 or 2 pairs Gen.3 Depends on NIC module specifications Depends on NIC module specifications Depends on NIC module specifications 1 x Intel I347 (SKU A only), 2 x Intel I350, 3 x 82599ES 1 x Intel i210 1 x Intel 82574L 1 or 2 x Intel i210 N/A 4 8 or x GbE RJ x GbE RJ-45 1 or 2 Intel Acceleration Technology Intel QuickAssist Technology (Depends on SKU) Cavium CN1620 (optional) Intel QuickAssist Technology (Depends on SKU) 1 x reset button Software reset by default 1 x reset button Software reset by default 1 x reset button Software reset by default 1 x reset button Software reset by default 1 x RJ-45 1 x RJ45 1 x RJ-45 1 x RJ-45 2 x USB x USB x USB x USB 2.0 Yes Yes Yes Yes 2x PCI-E*16 interface by ZD connector reserved for the custom model in 2U form factor N/A 1 x PCI-E*8 expansion (optional) Optional rear expansion PCI-E slot N/A N/A N/A N/A CPU heatsink with fan duct CPU heatsink with fan duct CPU heatsink with fan duct CPU heatsink with fan duct 4 x independent hot-swappable cooling fans with smart fan control 4x independent hot-swappable cooling fans with smart fan control 4 x independent hot-swappable cooling fans with smart fan control 4 x independent hot-swappable cooling fans with smart fan control 0 ~ 40 C / -20 ~ 70 C 0 ~ 40ºC / -20 ~ 70ºC 0 ~ 40º C / -40~70º C 0 ~ 40º C / -40~70º C 5% ~ 90%, non-condensing 5 ~ 90% non condensing 128 x 64 Graphic LCM 2 x 20 characters (Graphic optional) 2 x 20 characters (Graphic optional) 2 x 20 characters (Graphic optional) Yes Yes Yes Yes Yes Yes Yes Yes 444 x 44 x 550 mm 438 x 44 x 630 mm 444 x 88 x 600 mm 431 x 88 x 600 mm 11 kg 18 kg 25 kg 25 kg 1+1 ATX 650W redundant powers each 1+1 ATX 650W redundant power supply units 1+1 ATX 600W redundant powers each 1+1 ATX 600W redundant power supply units AC 90~264V@47~63Hz AC 90~264 V@47~63Hz AC Hz AC Hz CE emission, FCC Class A, RoHS CE Class A, FCC Class A, RoHS CE emission, FCC Class A, RoHS, UL CE emission, FCC Class A, RoHS, UL 16

18 NIC Modules Slim Module Ports Chipset Bypass FW-7573 FW-8759 FW-8771 FW-8877 FW-8894/ 8895/8896 NCA-4010 NCA-4210 NCA-5210 NCA-5510 GbE Copper Modules NCS2-IGM427A 4 Intel Cave Creek 2 Pairs Gen3 V V V V V V NCS2-IGM427B 4 Intel Cave Creek N/A V V V V V V NCS2-IGM806A 8 2 x Intel i350-am4 4 Pairs Gen3 V V V V V V NCS2-IGM806B 8 2 x Intel i350-am4 N/A V V V V V V NCS2-IGM808A 8 Intel i210at 4 Pairs Gen3 V V V V V V NCS2-IGM808B 8 Intel i210at N/A V V V V V V GbE Fiber Modules NCS2-ISM405A 4 1 x Intel i350-am4 Yes V V V V V V NCS2-ISM406A 4 1 x Intel i350-am4 N/A V V V V V V NCS2-ISM802A 8 2 x Intel i350-am4 N/A V V V V V V GbE Copper/Fiber Mixed Modules NCS2-IMM x Intel i350-am4 N/A V V V V V V NCS2-IMM x Intel i350-am4 2 pair Gen 3 V V V V V V 10GbE Copper Modules NCS2-ITM202A 2 Intel X540 N/A V V V V V V NCS2-ITM203A 2 Intel X540 1 Pair V V NCS2-ITM203B 2 Intel X540 N/A V V 10GbE Fiber Modules V V V V V V V V NCS2-IXM204A 2 Intel 82599ES N/A V V V V V V NCS2-IXM205A 2 Intel 82599ES 1 Pair Gen3 V V V V V V NCS2-IXM405A 4 Intel 82599ES N/A V V V V V V NCS2-IXM407 4 Intel XL710-AM1 N/A V V V V V V 40GbE Fiber Modules NCS2-IQM201 2 Intel XL710-AM2 N/A V V V V V V 17

19 Network Processing Cards Lanner offers a selection of add-on cards to offload the most demanding packet processing to processors that are specifically designed for this task. In addition to the standard cards listed here, we also produce custom designed cards and modules. Video Transcoding Card NCS2-VT02A Efficient transcoding is imperative for transporting high quality and bandwidth-hungry video content, often stored and fed from the Cloud. By utilizing the latest Intel technology, Lanner has created the NCS2-VT02A, an add-on NIC module for optimizing video transcoding for high-volume video delivery. The NCS2-VT02A is one of the many front-facing and easily swappable add-on modules compatible with Lanner s x86 network appliances, designed for expanding these appliances functionalities and capabilities. Board NCS2-VT02A Processor Chipset System Memory BIOS Display USB RTC Battery Intel Xeon E v5 CPU (Codenamed Skylake-H) 4 cores 8MB cache Intel CM236 Support 2 SODIMM DDR4L-1333/2133/2333/2600 MHz un-buffered, non-ecc 16 GB Maximum capacity AMI SPI Flash BIOS Intel Iris Pro graphics P6300 and 1x D-sub and 1x HDMI 2 x External Type-A USB 3.0 in front of panel CR2032 Li-battery External Front I/O LED Reset HDMI USB Ethernet 1x green for power-on status, 1x yellow for storage status 1x push switch for reset 1x HDMI connector 1x double-stack type A USB connector 1x RJ45 with LED connector Internal I/O SATA Environment Specification Operating/Storage Temperature 1 x SATA port for SATA DOM -5~45ºC / -20~80ºC; Certification CE/FCC RoHS Class A Compliance 18

20 Acceleration Cards Our VPN accelerator cards provide highperformance tunneling and encryption services suitable for site-to-site and remote access applications. This hardware-based VPN acceleration is optimized to handle the repetitive but volume mathematical functions required for IPsec. Offloading encryption assists the card not only improves IPsec encryption processing, but also maintains high-end firewall performance. Dedicated VPN and L7 accelerator cards offload CPU resources and improve total application performance As an integral component of many high-end VPN and UTM appliances, Lanner VPN cards can be integrated onto the motherboard. i Accelerator Card NCS2-AVICE03 AV-ICE04 AV-ICE05 * VPN Engine Intel Cave Creek 8950CC Intel Cave Creek 8955CC x 2 Intel Cave Creek 8955 x 4 Throughput 50 Gbps 55 Gbps 200 Gbps Form Factor PCI-E Gen.3 x8 PCI-E Gen.3 x8 PCI-E Gen.3 x16 Interface PCI Express PCI Express PCI Express Power consumption 20W 20W 80W Driver Support Linux, FreeBSD, VxWorks Linux, FreeBSD, VxWorks, Windows Linux, FreeBSD, VxWorks Note: All these cards are specific to Lanner network appliances. * (by Project) Accelerator Card AV-CVE2500 AV-CVE10000 AV-CVE20000 AV-CVE25000 * AV-ICE01 AV-ICE02 VPN Engine Cavium CN1620 Cavium CN1620 x 4 Cavium CNN3550 /3510 x 1 Cavium CNN3550/3510 x 4 Intel Cave Creek 8910 Intel Coleto Creek 8925 Throughput 2.5 Gbps 10 Gbps 20 Gbps 80 or 20 Gbps Up tp 10 Gbps Up tp 25 Gbps Form Factor PCI-E x4 PCI-E x4 PCI-E x8 PCI-E x8 PCI-E x8 PCI-E x8 Interface PCI Express PCI Express PCI Express PCI Express PCI Express PCI Express Power consumption Less than 5W Max. 10W Max. 20W Max. 90W 11W 17W Driver Support Linux, FreeBSD, VxWorks Linux, FreeBSD, VxWorks, Windows Linux, FreeBSD, VxWorks Linux Linux Linux Note: All these cards are specific to Lanner network appliances. * (by Project) 19

21 Accessories Common Accessories Name Part Number Compatibility IPMI Card IAC-AST2300 FW-8865, FW-8895, FW-8893, FW-8771, FW-8877, FW-8894, FW-8896, FX-7220, NCA-5510, NCA-5210/4210/4010 VGA Card IAC-AST2302 IAC-ASTMVGA02 IAC-AST2300VGA NCA-4210, NCA-5210 For FW-8896 network appliance to extend VGA display capability. For others and NCA- Series network appliance to extend VGA display capability. 1U Slide Rail PN9NSFH42Z10D FW-8865, FW-8758, FW-8875 PN9NSFBM3Z W FW-8877, FW-8894, FW-8896, NCA-5510, NCA-4210, NCA-4010, NCA-5210 FW U Slide Rail PN9NSFK33Z100 FW-8892 PN9NSFAIOZ100 FW-8895 PSU module (1U/2U/AC/DC) 2U PSU module 1U PSU module TPM module Wi-Fi/3G/4G/LTE module IAC-TPM01 - Support TPM 1.2 or Optional kit for FW-8894, FW-8896 and NCA-5510 NCS2-MINIPCIE01A IAC-TPM02 - Support TPM Optional kit for NCA Wi-Fi/4G module for Lanner network appliances with NIC module slot - 2 x full-length Mini-PCIe slots - 1 x SIM card reader - 1 x PCIe x8 gold finger - 2 x antenna holes Other Accessories Name PCI-E Riser Cards Description Each appliance has its own riser card, please contact Lanner sales for details. Note: Accessories change frequently. Please confirm part numbers before ordering to make sure you get the newest version. 20

22 Telecom Network Appliances (HTCA/HCP/FX Series) Replace fans and power supplies without removal from rack Dual x86 mainboards Hinged LCM 3 network blades, maximum up to 36 GbE ports or 24 10GbE ports HCP-72i2 Introduction to our Telecom Network Appliances Cloud computing has become a critical network core as operators strive to improve efficiency, deliver added value, and create new business opportunities. In fact, there is a shift of focus from reliance on physical hardware to ONP architecture based on SDN and NFV. Therefore, today s telecom platforms must optimally integrate carrier-class hardware ingredients and OPEN source software to maximize cost and performance for serviceability in telecom applications. Designed for software controlled networks, Lanner Telecom Network Appliances are carrierclass appliances offering extreme computing power with next-generation processors, custom I/O modular design, cutting-edge interconnect technologies, and solid RAS to run VPN, SDN and NFV applications for today s telecom environments. HCP-Series and FX-Series Both HCP and FX-Series product lines consist of network appliances that apply Lanner s Hybrid Telecommunications Computing Architecture (HybridTCA), which is created to meet the challenging requirements for carrier-grade network control, cloud computing and data center. These appliances have advantages over the prevalent AdvancedTCA infrastructure in aspects of hardware design, customization options and cost/energy efficiency. HTCA-Series Our exclusive HTCA Series integrates the best in class x86 computing power and switching capabilities in a single appliance, while maintaining efficiency and flexibility in service control and network management, making it perfect for meeting the increased demand in high computing applications within the carrier networks. 21

23 High-speed Switching Capacity HTCA-1000 and 2000 Series use state-of-the art Broadcom StrataDNX BCM88670 (Jericho) packet processor, offering throughput capacity up to 1.2Tbps. The high-speed throughput is up to carrier-class and easy to handle network traffic exchange. It can be applied to TOR (Top of Rack) Switch application. N+1 Modular Fan Cooling Systems Hot swappable technology is highly important to the networking industry as downtime is costly and tarnishes reputations. Fans are usually the first component to fail in any computer or dedicated appliance due to the mechanical nature and constant use. Lanner appliances have an array of fans along the rear panel that cools off the entire system. If one of these fans fails, network technicians can replace it easily due to its hot-swappable nature. NEBS and FIPS Compliance NEBS (Network Equipment-Building System) contains the key industry requirements for how to design and build reliable electronics for telecom network use. It is unique in its focus on telecommunications applications and environments for electronic systems. Lanner carrier-grade network appliances are NEBS and FIPS compliant. Redundant Power Supplies Secure your network and protect your investment in the case of component failure with two highefficiency 1200W-AC/1010W-DC power supply units. Dual Motherboards HCP-72i2 is designed with dual motherboards, each built with two high-performance Intel Xeon CPUs. While one handles core network applications and virtualization, the other can concentrate on offloading functions such as network processing. Field-replaceable mainboard trays Optimized Airflow Design Selection of Networking I/O Blades With up to three swappable I/O blades, the HCP-72i2 can be configured with up to 36 x 1GbE network ports or 24 x 10GbE network ports, in an array of SFP or copper combinations. With 8 quadchannel DDR4 modules and two removable SATA hard drive bays, the HCP-72i2 is easily scalable to tackle future requirements. Swappable I/O Blades By integrating I/O blade design and fieldreplaceable components, the network appliance platform provides warm swappable I/O blades replacements. HA (High Availability) Sync Ports Lanner HCP-72i2 provides one onboard sync port for each motherboard. The sync port can be used to synchronize with another HCP-72i2 for redundant link path or uplink to central server. It provides HCP-72i2 24/7 availability for critical environment. 22

24 HybridTCA - Cloud Computing in the Network Data Center Performance-Optimized Carrier Class Servers for Software-Defined Networking Background With cloud computing transforming nearly every industry, telecom providers have a unique opportunity. Not only can they use cloud computing to improve their existing operations, but they can also take on new roles as cloud providers. With their wellestablished network-based businesses, local presences, customer relationships, and aggregator expertise, telecom providers hold many advantages over other cloud providers. The move to SDN is a key enabler for telecom cloud computing. SDN allows telecom providers to flexibly and strategically use cloud resources. Providers can deploy virtualized network functions when and where they are needed to launch new services, create new businesses with ecosystem partners, and improve network operations. Latency-sensitive applications (such as video, voice, and gaming) can be hosted locally to deliver the best quality of service. Less sensitive applications can be hosted in centralized locations that are more cost-efficient. In short, SDN enables the network to be programmed, managed, and optimized more dynamically and at much larger scale. The advantages of Lanner HybridTCA Platform The Lanner HybridTCA (Hybrid Telecommunications Computing Architecture) platform was designed to integrate control plane and data plane in a single 2U or 6U appliance, delivering up to 400 or 640Gbps throughput. As the name implies, HybridTCA is based on AdvancedTCA (ATCA) technology. What sets the two apart is HybridTCA s flexibility. AdvancedTCA standards limit each board to 200W. With HybridTCA, everything is customizable. For example, each board on the new HCP-7000 HybridTCA Communication Platform can support up to four CPUs with a thermal budget of 130W for each CPU. HybridTCA can also deliver significant power and space savings up to 70 percent smaller and up to 70 percent more energy efficient than traditional appliances. In fact, a 2U or 6U HybridTCA design can outperform a 5U or 12U ATCA design. 23

25 HybridTCA Solution Brief HTCA-6000A Architecture Middle Plane Storage SATA HDD bay for each MB blade High Availability - Hot plug & hot-swap - Redundant PSU & fans - Rich IPMI manageability Validation NEBS and FIPS compliance Multiple Computing Blades Multicore computing capability with dual Intel Xeon CPUs for each blade Control Panel x6 Fully Modular Design A wide range of computing and networking blades available x4 Switching Capacity - Packet load balancing - Blade communications x2 The Modularized Architecture The HybridTCA architecture centers on the middle plane. This board connects the other elements together, making cable connections unnecessary. At the back, the Back Blade Unit (BBU) can host six processing blades. Using the latest Intel Xeon processor E v3/v4 product family, each of these boards can host dual-core configurations with 24 cores, for a total of 144 cores across six BBUs. The interconnection between these six boards is going through the Broadcom BCM56854 Switch, achieving a bandwidth beyond 480 Gbps. Because the architecture can support up to four CPUs per BBU, the system can readily expand to higher core counts in the future. Moving to the front, a Front Blade Unit (FBU) supports up to six swappable Ethernet interface blades or two Ethernet Switch blades plus four Swappable Ethernet Interface blades that each can be configured with up to 32 x 10GbE or 16 x 40GbE network ports in an array of QSFP, SFP+ or copper combinations. The front storage unit supports up to six 3.5 hard drives (HDDs) or twelve 2.5 HDDs/SSDs. A hinged LCD display provides status information. Under the storage area are the USB and serial ports and the IPMI management port. The HybridTCA also features 1200W N+1 redundant power units, and all system fans are placed on each BBU for easier service. Through FIPS/NEBS certification, hot plug and hot swap capabilities, redundant power supplies and fans, and rich IPMI manageability, Lanner HybridTCA platforms deliver high levels of reliability, availability and serviceability. A Versatile Solution Already in telecom use for application delivery, load balancing, high-end data center security, the Lanner HybridTCA platform demonstrates the versatility of the latest Intel technology. What s more, the modular design of the platform can be adapted to a wide range of uses, helping service providers keep up with rapidly changing markets. By blending the best features of data center and telecom infrastructure capabilities, the HybridTCA platform is an excellent match for the emerging needs of the telecom cloud. Disclaimer: An earlier version of this article appeared in the Embedded Innovator magazine (11th edition, 2015) published by the Intel Internet of Things Alliance. 24

26 Selection Guide for Telecom Network Appliances Feature Description HTCA-1000A HTCA-2000A HTCA-6000A Form Factor 1U Rackmount 2U Rackmount 6U Rackmount Platform Processor Options Intel Atom C2758 SoC processor 2.4GHz Intel Xeon processor E v3 series up to 135W Intel Xeon processor E v3 series up to 135W Chipset SoC Intel C612 Intel C612 OS Support ONIE, Linux Kernel 2.6 or above ONIE, Linux Kernel 2.6 or above Linux Kernel 2.6 or above Technology DDR3 ECC DDR4, Registered, ECC DDR4 2133MHz, Registered System Memory Max. Capacity 64 GB 128 GB (Registered) 512 GB (16 x 32GB) per M/B tray Socket Up to 2 x SODIMM Up to 4 x 288-pin DIMM 16 x 288-pin DDR4 DIMMs per M/B Storage HDD Bays 1 x SATA III, 1 x msata connectors 2 x Swappable 2.5 HDD drive bays 6 x 3.5 Swappable HDD drive bays CF/SD 1 x msata 64GB 1 x msata connector 1 x CF per M/B tray Ethernet Ports 24 x 10GbE SFP+ ports, 2 x 100GbE QSFP ports 64 x 10GbE SFP+ ports, 16 x 100GbE QSFP ports Blade 1/2: 4 x GbE RJ x 10GbE SFP+ Blade 3~6: 32 x 10GbE SFP+ Bypass N/A N/A N/A Networking Controllers Broadcom StrataDNX BCM8867x (Jericho) packet processor with 720Gbps ~1.2Tbps capacity Broadcom StrataDNX BCM8867x (Jericho) packet processor with 720Gbps~2.4Tbps capacity M/B1,M/B2: Broadcom Trident-II Switch BCM56854 M/B3~M/B6: Intel XL710 NIC Module Slot / Blade 4 x NIC Module Slots 8 x NIC Module Slots 6 x Blades IPMI 2 x onboard IPMI ports 2 x onboard IPMI ports 1 x onboard IPMI ports Management Port 2 x 10G SFP+ ports 2 x 10G SFP+ ports N/A Reset button Yes Yes Yes I/O Interface Console 1 x RJ-45 1 x RJ45 1 x RJ-45 USB 2 x USB x USB x USB 2.0 Expansion Cooling PCIe N/A N/A N/A PCI N/A N/A N/A Processor CPU heatsink with fan duct CPU heatsink with fan duct CPU heatsink with fan duct System 4 x cooling fan modules 4 x cooling fan modules 5 x heavy duty fan with hot-swap Environmental Parameters Temperature, ambient operating / storage Humidity (RH), ambient operating / ambient nonoperating 0ºC ~55ºC / -20ºC~70ºC 0ºC ~ 55ºC / -20ºC~70ºC 0 ~ 40 C / -20 ~ 70 C LCD Module N/A N/A 2 x 20 characters Miscellaneous Watchdog Yes Yes Yes Internal RTC with Li Battery Yes Yes Yes Dimensions Dimensions (WxHxD) 438 x 44 x 450 mm 438 x 88 x 450 mm 438 x x 685 mm Weight 10 kg TBD 55 kg Power Watts / Type Input Redundant PSU 300W AC 90~264V@50~60Hz DC -36~-72V AC 1100 watt 1+1 Redundant /each DC 1100 watt 1+1 Redundant /each PM bus support AC 90~264V@50~60Hz DC -36~-72V AC 1200 watt N+1 Redundant /each DC 1010 watt N+1 Redundant /each PM bus support AC: 85 ~ 264 V DC: -36V to -72V Approvals & Compliance CE class A, FCC Class A, RoHS, UL, NEBS CE class A, FCC Class A, RoHS, UL, NEBS CE Class A, FCC Class A, RoHS 25

27 HCP-72i2 FX-7220 FX-3210 FX U Rackmount 2U Rackmount 2U Rackmount 3U Rackmount Four Intel Xeon E v3/v4 Series processors on LGA2011 Two Intel Xeon E series processors on LGA2011 Intel Sandy Bridge/Ivy Bridge processor in LGA 1155 package Intel Xeon processor E series on LGA2011 (Sandy Bridge-EP or Ivy Bridge-EP) Intel C612 Intel C600 Intel C206 series chipset Intel C604 Chipset Linux Kernel 2.6 or above Linux Kernel 2.6 or above Linux Kernel 2.6 or above DDR4 2133MHz, Registered Quad-channel DDR3 up to 1600 MHz DDR3 1333/1600 SDRAM, ECC or non-ecc Windows Server 2003, 2008, Linux Kernel 2.6 or above Quad-channel DDR3 1066/1333/1600 MHz (Registered or unbuffered, Ecc or non-ecc) 512 GB (Registered) 128 GB 32 GB 512GB (Registered) Up to 32 x 240-pin DIMM (16 DIMM per M/B) 240P DIMM x 8 4 x DIMM socket from 2 channel 16 x 240-pin DIMM 2.5 x 2 (removable tray) 3.5 x 2 (removable tray) 3.5 HDD x 4 (HDD Tray x4) 12 x 3.5 HDD/SSD kit 1 x msata socket 1x Type II CompactFlash Compact Flash Type II Socket x 1 1 x CF card Type II Up to 36 x GbE SFP or 24 x 10GbE SFP+ via 3 network blades with onboard 1 management port and 1 SFP+ dedicate port Up to 36 x GbE SFP or 12 x 10GbE SFP+ via 3 network blades with onboard 1 management port and 1 SFP+ dedicate port 4 x GbE RJ-45 default 20 GbE ports maximum 1x RJ-45 with LED for IPMI / Management port N/A N/A 2 Pairs Gen3 Depends on NIC module Bypass Spec. Intel 82574L & 82599ES Intel 82574L & 82599ES 2 x Intel i350 Intel Ethernet controller, depends on NIC module specification 3 x Blades 3 x Blades 2 x NIC Module Slots 2 x NIC Module Slots 1 x IPMI port per M/B 1 x IPMI port N/A Share with Management port 1 x Management port per M/B 1 x Management port 1 x GbE RJ-45 One, share with IPMI port Yes Yes Yes Yes 2 x RJ-45 1 x RJ-45 1 x RJ-45 1 x RJ-45 2 x USB x USB x USB x USB 2.0 N/A N/A N/A 1 x PCI-E*8 full height PCI-E card in the front; 1 x PCI-E*8 in the rear via riser card N/A N/A N/A N/A CPU heatsink with fan duct CPU heatsink with fan duct 2U CPU heat-sink 2 x CPU heatsink with fan duct 5 x heavy duty fan with hot-swap per M/B 5 x heavy duty fan with hot-swap per M/B 3 x rpm System 2U Fan 3 x independent hot-swap cooling Fans 0 ~ 55 C / 105W 0 ~ 40 C / 130W 0 ~ 55 C / 95W 0 ~ 40 C / 130W 0 ~ 40º C / -20~70º C 0 ~ 40º C / -20~70º C Hinged LCM, 2 x 20 characters Hinged LCM, 2 x 20 characters 2 x 20 characters 2 x 20 characters Yes Yes Yes Yes Yes Yes Yes Yes 431 x 88 x mm 431 x 88 x 710 mm 444 x 87.8 x mm 442 x 132 x 631 mm 35 kg 32 kg 20 kg 35 kg AC 1200 watt 1+1 Redundant /each DC 1010 watt 1+1 Redundant /each PM bus support AC 1200 watt 1+1 redundant /each DC 1010 watt 1+1 redundant /each PM bus support 350W AC redundant power supply 800W redundant power supply units AC 100~240V@50~60Hz DC -36~-72V AC 100~240V@50~60Hz DC -36~-72V 100~240V ~ 5-3A, 60-50Hz 90~264V@47~63Hz CE Emission, FCC Class A, RoHS CE Emission, FCC Class A, UL, C-Tick, VCCI CE, FCC Class A CE Class A, FCC Class A, RoHS 26

28 Selection Guide for Networking I/O Blades I/O Blades Picture Ports Chipset Bypass FX-7220 HCP-72i2 HTCA -1000A /2000A HTCA- 6000A TCM-IGTC01A 12 ports GbE RJ-45 Intel i350 N/A V TCM-ISTC01A 12 ports GbE SFP Intel i350 N/A V TCM-IXM801A 8 ports 10G SFP+ Intel N/A V NCM-BPGC01A 12 ports GbE RJ45 Intel i350 Gen.2 Bypass V NCM-BPGC01B 12 ports GbE RJ45 Intel i350 N/A V NCM-BPSC01A 12 ports GbE SFP Intel i350 N/A V NCM-BPX402A 4 ports 10G SFP+ Intel N/A V HLM port GbE RJ45, 16 port 10GbE SFP+ BCM56854 N/A V HLM port 10GbE SFP+ Intel XL710 N/A V HLM port 100G QSFP+ BCM82381 N/A V HLM port 10G SFP+ BCM82328 N/A V 27

29 Network Processor Platforms (MR Series) Introduction to the MR Series Lanner s MR Series of MIPS RISC network processing appliances use the performance-boosting and low-power processors from Cavium, Freescale and Marvell for specified mission-critical applications like IPS, VPN and virus scanning. Freescale QorIQ The QorIQ P1 platform series CPUs allow high levels of integration and clever power mechanics to enter a wide range of industries including networking, telecommunications, manufacturing, maintenance, and security applications. The series allows for both single and dual core solutions in the 533MHz to 800MHz performance range with minimal power consumption. Cavium OCTEON The Cavium OCTEON family of multi-core MIPS64 processors is a scalable, high-performance, and low-power solution for intelligent networking applications. Partner Redundant Power Supplies Many top-of-the-line network appliances utilize dual power supplies to ensure a constant flow of power. These appliances are deployed for 24/7 operations and every failure can result in tremendous cost. Therefore, smart network maintenance experts utilize dual power supplies to make sure these appliances with proper power management. LAN Bypass Bypass ports allow uninterrupted network traffic even if a single in-line appliance is shut down or hangs. Lanner s R&D have further developed basic bypass functionality to provide higher reliability and greater control. These software-compatible processors integrate next-generation networking I/Os along with the most advanced security, storage, and applicationoriented hardware acceleration, offering throughput and programmability for the Layer 2 through Layer 7 processing requirements of intelligent networks. For more information on Lanner s advanced bypass technology, please see our white paper The Evolution of LAN Bypass Technology: Lanner s Generation One to Generation Three Bypass. at Marvell NETWORKS Lanner offers products with processors from Marvell Technology. Marvell processors accelerates complex network traffic to significantly enhance the performance and functionality of advanced mobile and wireless infrastructure, storage, cloud services, and infrastructure networks. PCI Expansion Slots Most MR products come with a Mini-PCI, Mini-PCIe, or PCI-X slot for function expansion. For example, VGA cards, acceleration cards with Cavium NITROX or encryption cards. 28

30 Selection Guide for Network Processor Platforms Feature Description MR-328 Form Factor Desktop Platform Processor Options Cavium Octeon III CN MHz OS Support Linux OS (Kernel version depends on BSP) Flash Memory Boot Flash Extra Flash 2MB NOR Flash 512MB NAND Flash Technology DDR3 Onboard 2 GB System Memory Max. Capacity 2 GB Socket Onboard Storage HDD Bays CF/SD 1 x 2.5 HDD (Optional) 1 x SD Ethernet Ports 6 x GbE RJ-45 switch ports Bypass N/A Networking Controllers Marvell 88E6172 switch + Intel i211 NIC Module Slot N/A Management Port N/A Reset button Yes I/O Interface Console 1 x RJ-45 USB 2 x USB 3.0 Expansion PCIe PCI 1 x Mini-PCIe N/A Cooling Processor System Passive heatsink Fanless Environmental Parameters Temperature, ambient operating / storage Humidity (RH), ambient operating / ambient non-operating 0 ~ 40 C / -20 ~ 70 C LCD Module N/A Miscellaneous Watchdog N/A Internal RTC with Li Battery Yes Dimensions Dimensions (WxHxD) Weight 231 x 44 x 200 mm 2 kg Power Watts / Type Input 36 W power adapter 110 ~ 220 V AC Approvals & Compliance CE Class B, FCC Class B, RoHS 29

31 MR-350 MR-631 MR-810 Desktop / Half-rack 1U Rackmount 1U Rackmount Freescale P MHz, Freescale P MHz Freescale P GHz SOC Dual Cavium ThunderX CN8890 Series Linux OS (Kernel version depends on BSP) Linux kernel 2.6 or up Linux kernel 2.6 or up 16Mbit NOR Flash 2Mbyte NOR Flash 2Mbyte NOR Flash 2048MBit NAND Flash 2Gbyte Nand Flash (Optional) 2Gbyte Nand Flash (Optional) Dual-Channel 667 MHz 512MB (MR-350A) 1GB (MR-350B) DDR MHz DIMM with ECC support DDR MHz DIMM with ECC, RDIMM or UDIMM 1 GB 2 GB 256 GB Onboard 2 16 x 288-pin N/A 1 x x SATA III, 1 x 2.5 drive bay (Optional) 1 x SD(MR-350B) 1x Type II CompactFlash 1x SD slot 5 x GbE RJ-45 switch ports 8 x GbE RJ-45 2 x GbE RJ-45, 2x 40G QSFP, 8x 10GbE SFP+ N/A 1 pair (SKU A) N/A Marvell 88E6171R switch VSC Switch Marvell 88E1111 Chip (management) N/A N/A N/A 2 N/A Yes Yes Yes Yes Yes 1 x RJ-45 1 x RJ-45 1 x RJ-45 1 x USB x USB x USB x Mini-PCIe (MR-350B) 1 x PCI-E*4 golden finger 1 x PCI-E*8 full-length, half-length card at rear N/A N/A N/A Passive heatsink Passive heatsink 2 x Passive CPU heatsink 1 x cooling fan (MR-350B) 2 x cooling fans 4 x swappable cooling fans 0 ~ 40 C / -20 ~ 70 C 0 ~ 40 C / -20 ~ 70 C 0 ~ 40 C / -20 ~ 70 C N/A N/A N/A N/A Yes Yes Yes Yes Yes 216 x 44 x 189 mm 431 x 44 x 305 mm 438 x 44 x 630 mm 1.2 kg 4 kg 18 kg 36 W power adapter 150 W single power supply 650 W redundant power supplies 110 ~ 220 V AC AC 110~240V AC 90~264V@47~63Hz CE Emission, FCC Class A, RoHS CE Emission, FCC Class A, RoHS CE Emission, FCC Class A, RoHS 30

32 Corporate Lanner Electronics Inc. 7F, No.173, Sec.2, Datong Rd. Xizhi District, New Taipei City 221, Taiwan T: F: E: USA Lanner Electronics Inc Westinghouse Drive Fremont, CA T: F: E: China 立 华 科 技 北 京 市 海 淀 区 农 大 南 路 33 号 厢 黄 旗 东 路 兴 天 海 园 一 层 T: F: E: Canada LEI Technology Canada Ltd 3160A Orlando Drive Mississauga, ON L4V 1R5 T: F: E: Taiwan 立 端 科 技 股 份 有 限 公 司 221 新 北 市 汐 止 區 大 同 路 二 段 173 號 7 樓 T: F: E: [email protected] Introductory Video Please verify specifications before quoting. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying or otherwise without prior written permission of Lanner Electronics Inc. All brand names and product names are the trademarks or registered trademarks of their respective companies. Lanner Electronics Inc.,