Spring 2008 Volume 1

Transcription

1 Spring 2008 Volume 1 10 Ground-breaking Years of 3D-Master CAD/TEMP for Long-term Provisionals All New Reusable Walser Matrix Bands 1st Annual Ride N Learn: Ride the Tail of the Dragon! Dental Education Schedule 3150 E. Birch Street Brea, CA 92821

2 Walser Matrices Reusable Stainless Steel Matrix Bands FIRST TIME IN NORTH AMERICA! GOES ON EASILY IN SECONDS BAND TWO TEETH AT THE SAME TIME 25 SIZES FOR UPPER AND LOWER JAW SUITABLE FOR EVERY MATRIX NEED Vident is proud to introduce Walser Matrices. These reusable stainless steel matrix bands are easy to fit and place in seconds. This unique matrix system can band two teeth simultaneously like no other matrix product on the market. They even have a band design that can fit over a rubber dam clamp when isolation is critical. We may have found the new standard in matrices, said Dr. Martin Mendelson, Director of Professional Development for Vident. Walser matrix bands feature a built-in spring system that adapts to the shape of the individual tooth. The matrices are very simple and quick to place with one hand movement and can save hours of chair time per month. The matrices accommodate all restorative needs, including MOD preparations, extralarge molars, anterior teeth, terminal teeth and even adjacent mesial and distal restorations. Patients can close their mouths and bite while the matrix is in place and they are autoclavable up to 50 times. The matrices are available in O shapes for MO, DO, and MOD fillings and in X shapes for DO and MO fillings in adjacent teeth. The matrices save time because they do not need to be removed and put onto an adjacent tooth, and they ensure maximum contact because the matrix strips are thin. For regular use in a dental office a set of 10 posterior matrices organized in a plastic tray is available, and the matrices and tray can be sterilized in an autoclave. There is also a set of 18 matrices and a complete set of 25. The height of the matrix strips range from five to eight millimeters. For ordering information regarding Walser matrix bands and other quality products call Vident Dental Technology Update /Spring 2008/ Vol USA Canada

3 Featured in Millions of Smiles 10 Ground-breaking years of 3D-Master VITABLOCS Guide 3D-Master Academic Advances in Dental Shade Education VITA Easyshade Bleachedguide 3D-Master In dental schools across North America, students are tutored using the Tooth Training Box VITA 3D-Master Tooth Trainer interactive software. This unique program asks students to match tabs based on value, chroma and hue. Advanced training is then given using the VITA TTB Tooth Training Box (pictured here) which features actual shade tabs from the 3D-Master system. The TTB system was developed by Prof. Dr. Holger A. Jakstat of Leipzig University, together with the cooperation of VITA in celebrates the ten-year anniversary of the VITA 3D-Master shade guide. Since its introduction in 1998, the VITA 3D-Master system has increased the precision and predictability of shade measurement by offering a broader range of natural and bleached shades and a scientifically based, systematic way to determine and reproduce accurate shades, including difficult intermediate shades. VITA 3D-Master shades and materials stand not just for outstanding natural appearance but also for maximum shade consistency and reliability. These characteristics have long made VITA tooth shades the undisputed standard among dentists and dental technicians worldwide. There are good reasons for this, and it has a long history: knowing just how far VITA tooth shades were ahead of others, VITA Farben was registered as a protected trademark as far back as the 1920s. These shades were then constantly updated, perfected and extended in 1935 the LUMIN effect was introduced, and 1955 saw the completion of the LUMIN vacuum shade scale, and in 1982 the VITAPAN system for harmonizing ceramic and acrylic shades was introduced. Despite the worldwide dominance of the Vitapan classic shade system, VITA Zahnfabrik launched the VITA 3D-Master system because of an innate desire to constantly develop and improve tooth shade. Now, the world of dentistry understands more than ever the concept of the VITA 3D-Master system: shades are established in easily discernible stages of lightness, chroma and hue. New methods require new materials and products, and VITA is constantly adding to the 3D-Master system. The VM system of 3D-Master porcelains is used by discriminating dental labs around the world, and the science of measuring 3D shades is keeping track with the addition of the VITA Easyshade for digital shade measurement, the VITABLOCS Guide for selecting VITABLOCS for CEREC restorations, and the Bleachedguide 3D-Master for tracking bleaching progress USA Canada Vident Dental Technology Update /Spring 2008/ Vol 1 2

4 Fast And Long-Lasting! with VITA CAD-Temp CAD/CAM technology has revolutionized dentistry. Computer-aided procedures stand for high precision and reduced production times. With VITA CAD-Temp composite blocks, inlab users (Sirona Dental Systems) can, for the first time, benefit from the advantages of the CAD/CAM technique in the manufacture of long-term provisional restorations. The blocks are suitable for the manufacture of provisional crowns and multi-unit partly or fully anatomical longterm temporary bridges with up to two pontics in VITA 3D-MASTER Shades. In the following case example, a three-unit (7 to 10), implant-supported temporary bridge was manufactured. Teeth 7 and 9 were replaced by implants; tooth 8 had been extracted recently and the gap was due to be filled with a bridge (fig. 1). the dentist preferred the fast manufacture of a screw-retained provisional restoration which can also be worn for a longer period of time without inconvenience to the patient. Before scanning the implant abutment, the retention areas (Straumann, Switzerland) were modified and the provisional abutments occlusally shortened in order to create sufficient space for the temporary bridge (fig. 2). Fig. 2 This was followed by the digital scanning of the abutment as well as the opposing jaw with the ineos Scanner (Sirona Dental Systems) (fig. 3). Fig. 1 It was the patient s wish to have a fixed dental restoration. Experience shows that gingival recession is usually to be expected in the following four to six months following the loss of a tooth. The resulting cavities must be lined in order to prevent food residue becoming trapped. To simplify procedures, Fig. 3 3 Vident Dental Technology Update /Spring 2008/ Vol USA Canada

5 After transferring the scanned data to the inlab 3D software, the fully anatomical bridge mode was selected and a suggested design generated by the software using the tooth database (fig. 4). Fig. 4 Only small additional manual modifications were made to the tooth positioning. The design data was sent to the inlab milling unit, which then milled the temporary bridge from a VITA CAD-Temp block (size CT-40: 15.5 mm x 19 mm x 39 mm). The block material is composed of a fiber-free, homogeneous, highly cross-linked acrylate polymer with microfiller. After milling the provisional bridge, holes were bored into it for the screw canals, and the provisional metal abutment coated with a resin opaque. This prevents any detriment to the shade of the restoration caused by the metal dies. Subsequently, tooth-colored adhesive resin was mixed, applied to the dies and cured. In order to prevent the penetrating into the screw holes, these first had to be sealed off with wax. After a curing time of minutes the screw holes were ground free again, and the bridge could be removed from the model for finishing and polishing. Thanks to the use of industrially manufactured abutments, an optimum marginal fit to the implants could be guaranteed The homogeneous surface, which is guaranteed by the curing process, is easy to polish and demonstrates a natural glaze. If any further individualization is desired, this can be achieved with a partially anatomical design and built up with VITA VM LC (fig. 5). Fig. 5 If shade individualizations are added with VITA VM LC materials, care must be taken to ensure that these are not situated at the surface; they must be covered completely with dentine, enamel or opaque materials. My experience with VITA CAD-Temp shows that the veneering material bonds very well with the block material. Finally, the dentist simply screwed the long-term provisional bridge made of VITA CAD-Temp onto the implants and covered the holes of the screw canals with toothcolored, light curing resin. The provisional bridge has now been in situ for six months, and both patient and customer are highly satisfied with the result. The long-term provisional restoration made of VITA CAD-Temp has no functional or esthetic drawbacks for the patient. VITA CAD-Temp offers numerous advantages for user and patient. The manufacture of provisional restorations from this material is simple and fast. The possibility of manufacturing long-term temporary restorations with VITA CAD-Temp using CAD/CAM technology means that considerable time is saved in comparison with the conventional procedures using denture teeth or wax modeling and a silicon key. The blocks offer a balanced combination of fracture toughness and elasticity. Thanks to the excellent performance, temporary restorations made of VITA CAD-Temp can be worn for extended periods without affecting the quality of the provisional restoration. Since the composite is free from residual monomer, the possibility of gingival irritation was avoided. To summarize, longterm restorations made of VITA CAD-Temp are the ideal solution, since they are simple to manufacture, comfortable to wear and attractive in appearance. - Thomas Wischropp, Master Dental Technician, Switzerland USA Canada Vident Dental Technology Update /Spring 2008/ Vol 1 4

6 Switch to VITA Teeth For Quality and Value VITA PHYSIODENS Anterior & Posterior Teeth Physiodens offer the dental professional exceptionally natural, individualized teeth for high esthetics and functional posteriors with anatomical occlusal design. Physiodens wide occlusal table is perfect for partial dentures as well as combination or implant cases and provides a harmonious transition from adjacent natural teeth. VITA Physiodens are multi-layered teeth that provide opalescence, luminescence and a balanced translucency. Physiodens teeth come in 26 3D-Master Shades and 15 VITA Classical Shades. Two additional bleached shades (0M1, 0M3) in selected moulds are also available. Features and Benefits of VITA Physiodens 9 layers provide natural translucency, opalescence and fluorescence Hand-made to make each tooth individual and unique Same size as natural teeth for combination cases Tooth morphology provides natural reflectiveness Ceramic filler provides wear resistance MRP* material offers high strength without being brittle Color stability even when grinding Anterior lingual anatomy aids natural phonetics Posterior morphology mirrors natural dentition Sharp anterior incisals aid chewing function VITA DENTURE TEETH ARE AVAILABLE FROM: Adium Dental Signal Hill, CA (562) Arnold Dental Lynnwood, WA (866) Dentrex Cherry Hill, NJ (856) Hi-Tec Dental Greenback, TN (800) Iowa Dental Supply Grimes, IA (515) Nowak Dental Carriere, MS (601) OTT Dental Pittsburgh, PA (412) The Teeth Connection Hawaii (808) Zahn Dental Various Locations (800) VITAPAN Anterior & Posterior Teeth Vitapan teeth feature individual characterizations and a degree of translucency, opalescence and fluorescence that correspond to natural teeth. Vitapan teeth are available in the 26 3D-Master Shades plus two bleach shades (OM1, OM3), and 15 VITA Classical Shades. They articulate with Synoform, Cuspiform and Lingoform posteriors. Cuspiform Posteriors exhibit the same material physical properties as Vitapan Anteriors and have a degree cuspal inclination as well as an optimum degree of intercuspation in the centric position. Synoform Posteriors have shallow inter-locking occlusal surfaces. Synoform teeth are indicated where a low degree of intercuspation is required. Their narrow design provides for more tongue room for the aging patient. Features and Benefits of VITA Vitapan 7 layers provide natural translucency, opalescence and fluorescence Hand-made to make each tooth individual and unique Ceramic filler provides wear resistance MRP* material offers high strength without being brittle Color stability even when grinding Anterior lingual anatomy aids natural phonetics Lateral wear facets in lower posterior prevent centric lock Sharp anterior incisals aid chewing function *MRP (Microfilled Reinforced Polyacrylate) For more information call your VITA TOOTH DEALER REPRESENTATIVE 5 Vident Dental Technology Update /Spring 2008/ Vol USA Canada

7 VITA Lingoform Posterior Denture Teeth The aim of a lingualized occlusion denture set up is the stabilization of the prosthetic restoration. The lingualized occlusion concept reduces lateral excursion loading which minimizes off axis stress to the underlying bone structure. In implant-supported overdentures, this minimizes destructive lateral forces on the implant. The Lingoform posterior teeth make it possible to combine excellent function and superior esthetics. The occlusal surfaces in the mandibular teeth have a buccal cuspal inclination of 20 degrees and 15 in the lingual area. In the upper jaw, the somewhat deeper occlusal surface relief comes very close to nature without sacrificing function. The ridge lap has been reduced to facilitate faster set up and reduce grinding. VITA Lingoform posteriors are indicated for: complete denture prosthetics implant-supported overdentures attachment cases VITA Lingoform posteriors can be combined with VITA PHYSIODENS or VITAPAN anteriors as required. VITA LINGOFORM posterior teeth sets are exclusively available in the six most popular VITA 3D-MASTER shades: 1M1 (B1), 1M2, 2M1 (A1), 2M2 (A2), 3L2.5 (B3), 3M2 (A3/D3), 3R3.5 (A3.5), 4M2 (A2), 0M3 (BLEACHED SHADE). Lingoform is available in three upper and lower moulds 21L, 22L and 23L. Features and Benefits of VITA Lingoform Lingualized occlusion design aids prosthetic stability 15º to 20º lower jaw occlusal cusps provides centric relationship Created to reduce destructive lateral forces on implants Reduced ridge lap for quicker set up Wide lower jaw occlusal plane for reliable centric occlusion Easy to set up concept enhances productivity Flatter lower jaw occlusal surface enhances ease of set up Hand-made to make each tooth individual and unique Ceramic filler provides wear resistance MRP* material offers high strength without being brittle Color stability even when grinding *MRP (Microfilled Reinforced Polyacrylate) VITA LINGOFORM LINGUALIZED SET-UP For more information call your VITA TOOTH DEALER REPRESENTATIVE USA Canada Vident Dental Technology Update /Spring 2008/ Vol 1 6

8 VITA VM 9 Margin Material VITA s NEW VM 9 margin porcelains were developed to help the ceramist with minor corrections in the marginal area and to achieve a smooth esthetic transition between the crown margin and the natural tooth. Since VM 9 Margin materials are plasticized, they must be hardened by heat. A simple hair dryer is adequate to accomplish this. Once hardened, it is very easy to remove the restoration from the die. The kit offers six different shades so the ceramist can accurately match the overall shade of the cervical area. The shades include: M1 (Icy Beige), which is a white color M4 (Wheat), which is yellow M5 (Amber), which is amber in color M7 (Seashell), a light beige shade M8 (Tan), which is a pastel brown M9 (Beach), a light orange color VITA VM 9 MARGIN porcelains are also available as separate items (M1, M4, M5, M7, M8, M9) VM 9 Margin Material: Simple to apply Easy to remove from the model Time-saving (saves one MARGIN firing) Offers a comprehensive color assortment Uses the exact number of powders to adequately cover the needs of all 26 VITA 3D-Master and bleach shades After the preparation of teeth 8 and 9. Central crown copings made of centrals fabriented using VITAVM 9. SAFETY AND EFFICACY OF VITA MATERIALS There have been recent media reports of lead in dental restorations imported from China. This has raised questions about materials used in the fabrication of dental restorations. All products for fabricating dental restorations manufactured by VITA Zahnfabrik and sold in North America by its subsidiary, Vident, fully comply with U.S. Food and Drug Administration (FDA) and Health Canada regulations and have received premarket clearance after having been found to satisfactorily demonstrate safety and efficacy. VITA product formulations do not include lead, radioactive isotopes or other harmful substances. In addition, the company has always followed strict quality control procedures for testing all VITA products. Germany-based VITA Zahnfabrik has been a leading manufacturer of safe and reliable dental restorative materials since 1924 and has sold these products exclusively through Vident since Material Safety Data Sheets (MSDS), safety and efficacy information and additional product facts are available at Additional documentation, including FDA device registration numbers, is available upon request by contacting Elizabeth Wolfsen, Regulatory Affairs Specialist at Vident, at x Vident Dental Technology Update /Spring 2008/ Vol USA Canada

9 Vident now offers a ten-year warranty on VITA In-Ceram YZ milled frameworks Made of yttrium-stabilized zirconium oxide and features a flexural strength exceeding 900MPa. VITA YZ is the strongest all-ceramic dental material, with no compromise of esthetics. Contact us for your FREE roll of VITA In-Ceram YZ 10-Year Warranty Stickers by calling NEW VITABLOCS TriLuxe forte for CAD/CAM esthetics VITABLOCS TriLuxe forte are the next step in esthetic CAD/CAM milling, and are based on the outstanding esthetics achieved with VITABLOCS TriLuxe for CEREC, which have proven their clinical efficacy in countless successful restorations since Improved are the finer nuances of the shade transition from the enamel to the neck layer. There is also more intense color saturation and increased fluorescence in the cervical area. These new features produce a convincing and natural shade effect, and an improved chameleon blend, to the existing dentition. The result is an excellent esthetic result without the need to individualize and characterize the shade. All-new TriLuxe forte blocks, available in sizes and shades: TF-12 (10 x 12 x 15 mm)...1m2 TF-14 (12 x 14 x 18 mm) M2 TF-14/14 (14 x 14 x 18 mmm).. 3M2 NEW Akzent Spray Glaze VITA Akzent Spray Glaze is ready for use and easy to apply straight from the can. It is perfect for glazing all-ceramic and metalceramic restorations such as inlays, onlays, veneers, crowns and bridges with a firing temperature above 850ºC. Akzent Spray Glaze can be processed in combination with VITA Akzent ceramic stains. Ready-mixed with simple, reliable application Mixing with liquid is not required Glaze several restorations at once Creates thin, uniform layers Adds brilliance without changing surface texture Perfect for VITABLOC CAD/CAM restorations Order No. S $ USD - $ CAN Courses and Workshops 2008 Vident Dental Education Schedule For a FREE printed catalog of the latest courses call in USA in Canada or download the PDF at and click Downloads> Course Brochures The Art of Passion: A Photographic Journey Teeth, Ceramics, Faces and Places by Dr. Ed McLaren This amazing coffee-table style volume collects inspirational before and after cases, a detailed pictorial description of Dr. McLaren s skeleton build-up technique, an analysis of color and digital photographic equipment and much more. $ 164 US $181 CAN USA Canada Buy two TriLuxe forte strips and receive the NEW VITABLOCS 3D-Master Guide FREE!* Made of the original VITABLOCS Mark II ceramic material, the VITABLOCS 3D-MASTER Guide will aid you in selecting the perfectly suited VITABLOCS Mark II or TriLuxe forte blocs for your restorations. *Offer valid through June 30, Fax your Patterson Dental invoice to Vident at and we will ship your Vitablocs guide directly. Allow 2-4 weeks for delivery. Not valid with any other offer. Vident Dental Technology Update /Spring 2008/ Vol 1 8

10 2008 Vident Dental Education Schedule (March through July) We are proud to present world renowned educators who teach our courses with a passion and commitment to lifelong learning. Vident offers hundreds of hours of continuing education covering many aspects of dentistry including color science, porcelain applications, CAD/CAM dentistry and denture fabrication. For up-to-date course schedule and descriptions of available courses please visit the new section of our website: COURSE LOCATION LECTURE/WORKSHOP INSTRUCTOR FEE APRIL 4/2-4/4 The inlab Experience: Three Day Basic Training Brea, CA Workshop Mike McIntee CDT $1,500 and David Morgan 4/11 Creating the Illusion of Nature: Esthetics with Staining & Glazing Brea, CA Workshop Ken Zaker, CDT $235 4/16 Color Communication: Evidence Based Shade Accuracy Fargo, ND Lecture Dr. Mark Murphy $60/$30 4/21 Color Communication:Evidence Based Shade Accuracy Montreal, QC Lecture Dr. Mark Murphy $70/$32 4/22 Color Communication:Evidence Based Shade Accuracy Halifax, NS Lecture Dr. Mark Murphy $70/$32 4/23-4/25 The inlab Experience: Three Day Basic Training Brea, CA Workshop Allen Lee $1,500 and David Morgan 4/25 VITAVM 13: Special Veneering Techniques Lewisville, TX Workshop Abel Fernandez, CDT $425 4/30 Creating the Illusion of Nature: Esthetics with Staining & Glazing Seattle, WA Workshop Mike McIntee, CDT $235 4/30 Creating the Illusion of Nature: Esthetics with Staining & Glazing Coraopolis, PA Workshop Bill Mrazek, CDT $235 COURSE LOCATION LECTURE/WORKSHOP INSTRUCTOR FEE MAY 5/2 Creating the Illusion of Nature: Esthetics with Staining & Glazing Portland, OR Workshop Mike McIntee, CDT $235 5/2 The Total System Appoach to Ceramic Restorations with VITAVM 13 Coraopolis, PA Workshop Bill Mrazek, CDT $500 5/2-5/3 Advanced Porcelain Techniques with VITAVM 13 Brea, CA Workshop Dr. Ed McLaren $850 5/3 The Total System Appoach to Ceramic Restorations with VITAVM 13 Washington, DC Workshop Bill Mrazek, CDT $500 5/7-5/9 The inlab Experience: Three Day Basic Training Charlotte, NC Workshop In House Technician $1,500 5/7 Implant Retained Denture Newark, DE Lecture Dennis Purinton, CDT Free 5/8 Implant Retained Denture Kingsport, TN Lecture Dennis Purinton, CDT Free 5/9 Technique Advantage: Strategy for Value Based Prosthetics Dentures Brea, CA Workshop Alice Sager, CDT $400 5/9 Zirconia Substructures with VITAVM 9 Sacramento, CA Workshop Bobby Williams, CDT $500 5/9-5/10 Digital Photo and Shade Taking Chantilly, VA Lec/Workshop Dr. Ed McLaren $995 9 Vident Dental Technology Update /Spring 2008/ Vol USA Canada

11 2008 Vident Dental Education Schedule (March through July) 5/10 Zirconia Substructures with VITAVM9 San Francisco, CA Workshop Bobby Williams, CDT $500 5/13 Pressable Ceramics with VITAPM9 Portland, OR Lecture Jeff Yeider, CDT $49 5/14 Pressable Ceramics with VITAPM9 Seattle, WA Lecture Jeff Yeider, CDT $49 5/14-5/16 The inlab Experience: Three Day Basic Training Brea, CA Workshop Mike McIntee, CDT $1,500 5/15 VITAPM9: Pressable Ceramics Boise, ID Lecture Jeff Yeider, CDT $49 5/17 VITAVM9: Esthetic Veneering Dallas/Addison, TX Workshop Victor Castro, CDT $425 5/20 Color Communication:Evidence Based Shade Accuracy Kingston, ONT Lecture Dr. Mark Murphy $70/$32 5/21 Color Communication:Evidence Based Shade Accuracy Toronto, ONT Lecture Dr. Mark Murphy $70/$32 5/21 Creating the Illusion of Nature: Esthetics with Staining & Glazing Modesto, CA Workshop Brian Li, RG $235 5/22 Color Communication:Evidence Based Shade Accuracy Hamilton, ONT Lecture Dr. Mark Murphy $70/$32 5/23 Creating the Illusion of Nature: Esthetics with Staining & Glazing Sacramento, CA Workshop Brian Li, RG $235 5/30 Tomorrow s Technology and The Science of Shade Key Biscayne, FL Lectures Dr. Giordano $150 and Dr. Mendelson 5/30-5/31 The Total System Approach to Ceramic Restorations with VITAVM Cedar Rapids, IA Workshop Bill Mrazek, CDT $750 JUNE COURSE LOCATION LECTURE/WORKSHOP INSTRUCTOR FEE 6/13 Advanced inlab: Digital Sculpturing of Esthetic Veneers Charlotte, NC Workshop Strat Fotos, CDT $750 6/13 Creating the Illusion of Nature: Esthetics with Staining & Glazing Boise, ID Workshop Mike McIntee, CDT $235 6/18-6/20 The inlab Experience: Three Day Basic Training Brea, CA Workshop Allen Lee $1,500 and David Morgan 6/20 The Total System Appoach to Ceramic Restorations with VITAVM 13 Los Angeles, CA Workshop Bill Mrazek, CDT $500 6/21 Esthetic Dentures for Success Using Lingualized Occlusion Denver, CO Workshop T.G. Hornisher, CDT $400 6/21 The Total System Appoach to Ceramic Restorations with VITAVM 13 San Diego, CA Workshop Bill Mrazek, CDT $500 6/23 Color Communication:Evidence Based Shade Accuracy Dallas/Addison, TX Lecture Dr. Mark Murphy $65/$30 6/23-6/26 Discovering the Ultimate Esthetic Result with VITA VM9 & PM9 Bad Sackingen, Germany Workshop Barbara Marek $1,250 6/24 Color Communication:Evidence Based Shade Accuracy Oklahoma City, OK Lecture Dr. Mark Murphy $65/$30 6/25 Color Communication:Evidence Based Shade Accuracy Tulsa, OK Lecture Dr. Mark Murphy $65/$30 6/27 Esthetic Realism with VITAVM7 In-Ceram Alumina Sacramento, CA Workshop Bobby Williams, CDT $425 6/27 Advanced inlab: Digital Sculpturing of Esthetic Veneers Brea, CA Workshop Strat Fotos, CDT $750 6/27-6/28 The Total System Appoach to Ceramic Restorations with VITAVM Kansas City, MO Lec/Workshop Bill Mrazek, CDT $750 6/28 Technique Advantage: Strategy for Value Based Prosthetics Dentures Brea, CA Workshop Alice Sager, CDT $400 6/28 The Inconspicuous Denture Washington D.C. Workshop Dennis Purinton, CDT $400 6/28 Zirconia Substructures with VITAVM9 Modesto, CA Workshop Bobby Williams, CDT $500 JULY COURSE LOCATION LECTURE/WORKSHOP INSTRUCTOR FEE 7/10-7/12 In-Ceram: Fabrication of Esthetic All Ceramic Restorations Brea, CA Workshop Ky Hale $495 7/16-7/18 Precision Dentures with Physiodens in French Bad Sackingen, Germany Workshop Anne-Marie Wehrung $1,300 7/17-7/19 The inlab Experience: Three Day Basic Training Charlotte, NC Workshop Ken Zaker, CDT $1,500 7/18 Esthetic Veneering with VITAVM9 Oklahoma City, OK Workshop Victor Castro, CDT $425 For up-to-date course schedule and descriptions of available courses please visit the new section of our website: USA Canada Vident Dental Technology Update /Spring 2008/ Vol 1 10

12 September 25-27, 2008 Knoxville, TN Come Ride the Smoky Mountains We will be riding America s #1 bike and sports car road! The Tail of the Dragon at Deal s Gap has 318 curves in 11 miles. Plus, we will ride the Cherohala Skyway with its 60 miles of remote, scenic mountain highway. Enjoy the brotherhood of biking with other professionals. Plus, there will be tons of fun for those who don t ride. Thursday Sept. 25th Friday Sept. 26th Saturday Sept. 27th Mike McIntee, CDT Stain and Glaze Course* (Seating is limited*) Mark Baker, CDT Laboratory understanding and benefits of VITA 3D-Master shaded ceramic Kick Start Welcome Party at The Shed aka Smoky Mountain Harley-Davidson Live Band, Bar and Food Breakfast with Martin Mendelson, DDS Shade Science and Color Communication Ride the Cherohala Skyway and The Tail of the Dragon Tad Burkhalter Avoid the Slaughter: Bifurcate Your Income and Pay Less In Taxes Biker Party Live Band, Bar and Food Breakfast with Ed Flocken, CDT Natural Life-like Ceramics in Production Final Ride into the Smoky Mountains Farewell Party and Expo at The Shed Denture Set-Up Demo with Dennis Purinton, CDT Live Band, Bar and Food Hi-Tec Ride N Learn Sept , 2008 Knoxville, TN RENTAL INFORMATION Make Your Reservation Today! Smoky Mountain Harley-Davidson (865) or rentals@smh-d.com REGISTER EARLY! Hi-Tec Dental Products, Inc $ 250 * per person (Non-dental spouses are free) * Does not include airfare, hotel, meals or rentals 1820 W Lamar Alexander Pkwy Maryville, TN Visit or for more information.