AGRICULTURAL SCIENCES AND AGRICULTURAL ENGINEERING Rs. P.

Transcription

1 1 AGRICULTURAL SCIENCES AND AGRICULTURAL ENGINEERING Rs. P. 1. Afjal Ahmed, M. Khan : Capsule on General Agriculture & Ramjee Lal Meena 1st Ed., Agriculture Question Bank with Answers, 10th Ed Agricultural Engineering Question Bank with Answers : Prep. by Dr. B. S. K. K.Vidyapeeth, College of Agricultural Engg. & Tech., DAPOLI, 2nd Ed., Rep Ansari Irfan Ahamad : Objective Type Questions Bank on Food Process Engineering and Technology, 2nd Ed., Ansari Irfan Ahamad: Theoretical concepts and Formula and Pramod Rai in Food Processing Engineering st Ed Ansari Irfan Ahamad : Objective Type Questions in Renewable Energy Sources, 1st Ed Arun D. Bhagat & : Land and Water Management Mangal A. Patil Engineering In press 8. Das. T. K. : Weed Science: Basics and Applications, 2nd Ed., Rep., Das. T.K. : Weed Biology Ecology and Management 1st, Das, T.K. : Herbicides: Chemistry and Mode of Action 1st, Deshmukh, Dubey etc. : Objective Agronomy 1st Ed Dhondyal, S. P. : Social Sciences Research and Thesis Writing, 1st Ed., Dr. A. S. Pawar : Fundamentals of Wind Energy Utilization, 1st Ed., General Agriculture for I.C.A.R. Exams (For J.R.F., Ph.D., S.R.F. & A.R.S.) More than 2300 Solved Questions. (20th Ed., 2014) 15. Gupta S. N. : Question Bank of Horticulture, th Ed., Gupta S. N. : Instant Horticulture, 11th Ed., Gupta S. N. : Instant Agriculture, 2nd Ed., Garg and Chandra : Question Bank on Agricultural & Food Engineering, 5th Ed., Garg and Chandra : Processing and Food Engg. (Objective Q. and Answers) 1st Ed.,

2 2 20. I. D. Tyagi : Biotechnology and Genetics rd Ed., I. D. Tyagi : Principles of Plant Breeding st Ed., Jaisingh : This is Organic Agriculture 1st Ed Kanwar Bhattarai : Seed Technology Processing, (HB) & Mehta Storage and Marketing, 1st Ed., Krishnakumar, T., : Objective Questions in Food Process Thirupathi, V., Engineering, Ist Ed., Pandiselvam, R. 25. Mahendra Pal : Basics of Agriculture 2nd Ed., Maliwal : Agronomy at a Glance Vol-I Vol-II Michael and Ojha : Principles of Agricultural Engg. Vol. I (7th Edition, 2014) Vol. II (5th Edition, 2014) Mane, Ayare : Principles of Drip Irrigation System & Magar 3rd Ed., Mane & Ayare : Principles of Sprinkler Irrigation nd Ed., Maniknandan & : Indian Forestry : A Break Through Prabhu Approach To Forest Service 3rd Ed., M.S. Bhairamkar : Quantification of Variables and Various Scales in Extension Eduction, 1st Ed Nguyen, Singh : Globalization of Agriculture and and Garg its Implications 1st Ed., 06 (HB) Nikhade, Rawat : Numerical Problems in Agricultural & Victor Engineering 2nd, Ed., Nguyen & Singh : Rice Production and Export in India and Vietnam : Challenges and Prospects 1st Ed., 2008 (HB) P. Kumar and : Objective Forestry Question Bank V. Saravanan for UPSC/ASRB-NET/ARS/SRF/JRF/SFS 36. Pant, J. C. : Operations Research (Introduction to Optimisation) 7th Ed Prasad, Rajendra : Text Book of Rice Agronomy st Ed., Phirke P. S. : Processing and Conveying Equipment Design, 2nd Ed.,

3 3 39. Ramana Rao : General Studies (for ARS & other Competitive Exams.) 11th Ed., R.P. Singh, Jhamtani, : Revival of Indigenous Technical Dr. Premlata Singh, Knowhow in Agriculture (HB) Dr. G.A.K. Kumar 1st Ed., Ram Dutta : Agriculture Refresher, nd Rev. Ed., Rawat & Nikhade : Q. B. on Agricultural Engineering nd Ed Raju, K. S. : Prediction in Ungauged Basins for Sustainable Water Resources (HB) Planning & Management, 1st Ed., K. Sasikumar & : Agriculture Made Easy, V. Sarvanakumar 5th Ed Sharma, S. K. : Objective Food Science & Kalwit 5th Rev. Ed., Sharma & Naidu : Science of Cocoa Processing 1st Ed., 2008 (HB) Sharma Mukesh : Agricultural Tractor & Machinery and Balyan 2nd Ed., Sharma & Mukesh : Farm Machinery Design (Principles and Problems) 3rd Ed., Sharma & Mukesh : Design of Agriculture Tractor (Principles and Problems) 2nd Ed., Sharma & Mukesh : Farmpower & Machinery Management Vol.-I (Principles & Practices) 1st Ed Shukhdev Mangaraj : Modified Atmosphere Packaging of Fruits and Vegetables 1st Ed., Singh D. K. & : Objective Annotations Irrigation & Ramanna Rao Drainage Engineering, 1st Ed., Singh, G.N. and : Handbook of Farm Management Dhondyal, S. P. 2nd Ed., Singh, Jhamtani & : Training Management Premlata Singh (A Hand Book) 1st Ed., Srivastava etc. : Plastics in Agriculture 1st Ed Srivastava & Ojha : Technology & Applications of Bio-Gas nd Ed Srivastava, : Biomass, Briquetting & Applications Ojha etc. 1st Ed.,

4 4 58. Salaria, B. : A2Z Solutions Horticulture at a Glance Vol.-I, Fruits and Plantation Crops, 2nd Ed., Salaria : A2Z Solutions Horticulture at a Glance Vol. II, (Vegetables, Spices and Condiments) st Ed Salaria : A2Z Horticulture at a Glance Vol. III, 2nd Ed., Salaria : A2Z Solutions Horticulture at a Glance, 1st Ed.09, Rev. Ed., Salaria : A2Z Objective Horticulture Knowledge, 2nd Ed., Salaria : A2Z Objective Agricultural Knowledge Part-I, 1st Ed., Part-II, 1st. Ed Salaria : F.A.Qs In Horticulture (Frequently Asked Questions), 1st Ed Salaria : A2Z Instant Objective Horticulture (Vol.-I) Fruits and Plantation Crops 1st Ed., Salaria : Instant Horticulture Solutions (1st Ed. 2013) 67. Sharma, S. M. : Vegetable Oils : Sources and Enhancement Research in India (Hard Bound) 1st Ed., S. N. Sharma : Innovation in Field Experiments Planning and Statistical Analysis 1st Ed., Shukla, B. D. : Drying and Dryers 1st Ed., 2004 (HB) Singh Anil : Encyclopedia Dictionary of Agriculture 1st Ed., 2011 HB PB Suresh Chandra : Agril. Processing and Food S. K. Goyal & Technology, Durvesh Kumari 2nd Ed Suresh Chandra : Food Processing and Technology & others (Q. B.) 2nd Ed Swati, Kirad : Post Harvest Handling of Fruits & Bagche Vegetables and Flowers, 2nd Ed., Tiwari, R. Kumar : An outline on Objective Entomology Lok Nath 2nd Ed., Tyagi I. D. : Modern Agriculture New Paradigm st Ed.,

5 5 76. Tyagi I. D. : vk/kqfud Ñf"k mriknu 2st Ed., (Modern Agricultural Production) 77. Tyagi. S.K. : Agricultural Information Data Book st Ed., Vijay K. Kaushik : Beekeeping in India (A profitable Enterprise) 1st Ed., Vikas Kumar : The Practice Set of Objective Forestry st Ed Vyas, A. K. : An Introduction to Agriculture th Ed., Singh, Murdia, : Question Bank on Dairy and Goyal Food Technology, 1st Ed., *82. Kunte : Principles of Horticulture & Fruit Growing 10th Ed., *83. Yawalkar : Manures and Fertilizers 11th Ed., *84. Yawalkar : Vegetable Crops of India 5th Ed., *85. Saxena : Entomology at a Glance, 4th Ed., Vol.-I Vol.-II *86. Tyagi : Plant Breeding and Genetics at a Glance 2nd Ed., *87. HCL Gupta : Insecticides : Toxicology and Uses *88. Langhans R. W. & : Plant Growth Chamber H.B Tibbitts, T. W. *89. Arun Katyayan : Fundamentals of Agriculture 3rd Ed., Vol-I, 6th Ed., Vol-II, 6th Ed., *90. Somani : Soils and Fertilizers at a Glance *91. Paul & Sharma : Objective Fundamentals for Professionals in Extension Education *92. P.K. Aggarwal : Techniques in Seed Science & Tech CIVIL ENGINEERING 1. Archna Bohra Gupta: Engineering Mechanics & Vaishwanar 2nd Ed., Gupta, B. L. : Manual of Applied Mechanics Laboratory 2nd Ed., Gupta & : Concrete Technology, Quantity Subhash Chander Surveying & Valuation nd Ed. Rep. 2013

6 6 4. Gupta & : Hand Book for Civil Engineers Subhash Chander (HB) 2nd Ed., Rep Gupta & : Principles of Geoinformatics Subhash Chander 5th Ed., Gupta, R. K. : Engineering for Rural Development st Ed., 7. Gupta, R. K. : Civil Engineering Materials & Const. Practices 4th Ed., Gupta & Gupta : Water Supply Handbook, Ist Ed., Gupta & Gupta : Sewage Hand Book, Ist Ed., Subhash Chander : Dictionary of Civil Engineering th Rev. Rep., Lakshminarayanan : A Text Book of Engineering Graphics & Vaishwanar 1st Angle Projection, Including Auto CAD, 17th Ed., Malhotra, M. M. : Design of Steel Structures th Rev. Ed Pant, J. C. : Project Management CPM, PERT, GERT, Scheduling with Linear Programming 5th Ed Ramu : Steel Tables, SI Units th Rev. Ed., Raju, Sarkar & Dash: Integrated Water Resources Planning & Management 1st Ed., (HB) Raju, K. S. : Predictions in Ungauged Basins for Sustainable Water Resources Planning & Management (HB) 1st Ed Sharma, V. D. : Fluid Pressometry 1st Ed Subhash Chander : Concrete Technology, 1st Ed., Subhash Chander : Basics of Civil Engineering (As per RGPV, Bhopal), 1st Ed., Subhash Chander : Geotechnical and Foundation Engineering, 3rd Ed., Subhash Chander : Water Resources Systems Rajesh Prasad 3rd Ed., Rep Subhash Chander : Construction Management Systems, 2nd Ed., 2014

7 7 23. Vaishwanar : Theory of Structures 1st Ed Vaishwanar : Analysis & Design of Structures M.M. Malhotra & 2nd Ed., 2014 Subhash Chander 25. K. R. Chandhoke : Environmental Engineering and Disaster Management 1st Ed., *26. Gupta S. P. : Civil Engineering & Gupta S. S. (Through Objective Type Questions) 27. Chernigovskil : Application of Direction Blasting in Mining and Civil Engineering 2nd. Rev. Ed ELECTRICAL ENGINEERING 1. Indu, B. D. : Electrical Engineering Materials rd Ed Jain, K. C. : Solved Problems in Electrical Engineering, 2nd Ed., Jain, K. C. : Electrical Science, 5th Ed. Rep Jain, K. C. : Electrical Engg. & Electronics (As per Rajasthan Technical Univ., Syllabus) 4th Ed Jain, K. C. : Fundamental of Electrical Engineering, 1st Ed., Jain s : Dictionary of Electrical Engineering, 2nd Ed (In Press) 7. Pant, J. C. : Operations Research (Introduction to Optimisation), 7th Ed Pauddar, C. M. : Elements of Power Electronics, nd Ed., 2013 MECHANICAL ENGINEERING 1. Archna Bohra Gupta : Engineering Mechanics & Vaishwanar 2nd Ed., Agarwal, G. K. : Plant Layout and Materials Handling 1st Ed. Rep Chitalae, A. K. : Text Book of Operations Research Chauhan & : Management of Systems Vaishwanar

8 8 5. Gupta O. P. : Mechanical Engineering Objective Type Q & A, 3rd Ed., Jain, S. K. : Introduction to Metallurgical Analysis (Reprinted 2004) Khandwawala : Thermodynamic Approach for Refrigeration and Airconditioning 1st Ed Lakshminarayanan : Text Book of Machine Drawing & Mathur (With Computer Graphics and AutoCad) (First Angle Projection) 14th Ed., Lakshminarayanan : Engineering Graphics & Vaishwanar (Including Auto CAD) (First Angle Projection) 17th Ed., Mathur & Mehta : Thermal Engineering (SI Units) Vol. I, 3rd Ed Vol. II, 3rd Rev. Ed., Mathur & Mehta : Thermal Engineering 4th 2014 (Combined) Mathur & Mehta : Fluid Mechanics & Heat Transfer 3rd Ed., Mathur & Mehta : Thermal Science & Engineering rd Ed., Mathur & Mehta : Steam and Other Tables (Including Mollier Chart) Revised & updated, Mathur & Mehta : Thermodynamics and Gas Tables (SI Units) 2nd Ed., Mathur & Mehta : Refrigerant and Psychrometric Properties Tables and Charts (SI Units) 3rd Ed., M.L. Aggarwal : Design Data (for Mechanical Engineers) st Ed Mathur & Mehta : Mechanics of Fluids, 5th Ed., Mathur, Mehta : Elements of Mechanical Engg. & Tewari (Mechanical Technology) th Ed., Mathur & Mehta : Fundamental of Heat & Mass Transfer nd Ed., 2012

9 9 21. Mathur, Mehta, : Elements of Mechanical Engineering Tewari & Vaishwanar (Thermodynamics & St. of Materials) (As per M.D. University, Rohtak, Haryana) 2nd Ed Mathur, Mehta : Mechanical Science & Vaishwanar 3rd Ed., Mathur & : Engineering Drawing and Graphics Vaishwanar (1st Angle Projection) 4th Ed., Murty, R. L. : Introduction to Robotics 1st Ed NITS : Atlas for Mechanical Engineers 1st Ed Pant, J. C. : Operations Research (Introduction to Optimisation) 7th Ed Pant, J.C. : Project Management with CPM, PERT, GERT and Linear Programming 4th Ed., Sharma, V. D. : Fluid Pressrometry Vaishwanar : Fluid Power Engineering 3rd Ed., 2004 (with supplement) Singh, I. P. : Engg. Material Science and Metallurgy 1st Ed., Singh, I. P. : Material Science & Processes, & S. Chander 2nd Ed., I. P. Singh & : Materials Science and Engineering Subhash Chander 12th Ed., Rajesh K. Prasad : Manufacturing Processes, nd Ed., Rajesh K. Prasad : Non-Conventional Energy Sources and T. P. Ojha 4th Ed., Rajesh K. Prasad : Production Management Bijoya Prasad 2nd Ed., Vaishwanar : Dictionary of Mechanical Engg., nd Ed., Vaishwanar & : Manufacturing Technology Rajesh Prasad 6th Ed., Vaishwanar : Mechanics of Solids 6th Ed., *39. Whitney, Daniel : Experimental Mechanics of Fiber & Pipes Composite Materials UPSC (IES) : Engineering Service Examination Solved Papers Mechanical Engg., (Conventional type)

10 10 ELECTRONICS AND COMPUTER SCIENCE 1. Jain, K. C. : Elements of Electrical Engineering and Electronics, 3rd Ed., Jain, K. C. : Electronics and Instrumentation nd Ed., (Reprint 2013) 3. Deva Kumar, J : Fundamental of Data Structures, st Ed Gupta : Fundamentals of Digital Electronics 1st Edition, Rep Phatak A. P. : Telecommunications Technology nd Ed., 2009 *6. Buahshaum : Encyclopedia of Integrated Circuits CHEMISTRY 1. Banerjee & Jain : (Practicals in Engineering Chemistry) Hand Book of Technical Analysis 3rd Edition Jain, S.K. : An Introduction to Metallurgical Analysis, Reprinted, Mehta, V. P. : Polytechnic Chemistry, 12th Ed., Mehta, V.P., S.B. Jha : Engg. Applied Chemistry, & Sama Jain 1st Ed Saxena Sanjay : Engineering Chemistry (RGPV) Bhopal, 2nd Ed., Saxena Sanjay : Engineering Chemistry (MDU univ.) and K.U. 1st Ed., Shukla : Chemistry 2nd Ed., S. Chander & Jha : Engineering Physics and Chemistry th Ed., Rep Shashi Bhushan Jha : Engineering Chemistry 1st Ed., (As per JNTU, Hyderabad)

11 11 PHYSICS 1. Jain, K. C. : Text Book of Physics, 2nd Ed., S. Chander and Jha : Engineering Physics and Chemistry th Ed., S. B. Jha & Gupta : Engineering Physics (RTU) 1st Ed., S. B. Jha & Rao : Engineering Applied Physics (JNTU) nd Ed., 2010 ENGINEERING MATHEMATICS 1. Suryanaryana, P. : Engineering Mathematics 2nd Bali, R. C. : Mathematics I, 2nd Ed., Bali, R. C. : Mathematics II Jha : Statistical Tables 2nd Ed Gupta O. P. : Engineering Mathematics Solved Problems 2nd Ed., Karaiya : Engineering Mathematics 4th Ed., Rep Jha : Statistical Tables BUSINESS AND MANAGEMENT 1. Anshooda : Engg. Management 1st Ed., Chauhan & : Management of Systems Vaishwanar 6th Ed Chauhan : Engineering Management, 10th Ed., R.P. Singh etc. : Training Management Handbook Pant, J. C. : Project Management CPM PERT GERT and Linear programming 4th Ed Dhyani, Dash : Grass Roots of Entrepreneurship and Kumar 1st Ed., 7. K. C. Gupta : Introduction to Entrepreneurship st Ed., Prakash, Nirupma : Conflict Resolution : Peace & and Motilal Dash Development (HB) 1st Ed Meenakshi Raman: Communicating at Work: Shifting Paradigms and Emerging Trends, 1st Ed., 05

12 Rajesh K. Prasad : Production Management Bijoya Prasad 2nd Ed., Murthy : Quizzes 2nd Ed., Meenakshi Raman : Soft Skills : Cornerstone of Professional Success (HB) 1st Ed., 2010 ENGLISH 1. Shiv Kumar Tandon : English for Engineers, 4th Ed Girdhar A. P. : English Grammar and Composition, 1st Ed., 2010 (Made-Easy) Meenakshi Raman : Communicating at Work: Shifting Paradigms and Emerging Trends 1st Ed., Meenakshi Raman : Soft Skills : Cornerstone of Professional Success (HB) Pushp Lata, Devika : Interfacing ELT with Culture and and G.S. Chauhan Technology (Direction for New Classroom) 6. Pushp Lata, Devika : Integrating Web 2.0 Technology and G.S. Chauhan and Culture in ELT 7. BITS SAT HEALTH CARE AND RELIGION 1. Dr. Gopal Das Tripathi : Essential of School Health Care 2nd Ed., Modak & Pareek : Exercises for Diabetics & Cardiovascular Diseases and Obesity Nirupama Prakash, : Ageing: Social Issues Rashmi Kapoor & 1st Ed., 2010 (H.B.) Bandana Sachdev : : 7)%5 : : ;P 5;P ) : ; : 5 7)%5 : :8 5 <: : ; 3 5 7)%5 : 7 <

13 : )%5 : : : 9 5: ; 5 5 : = (< ) ; 5 5 : : : : : (HB) ;7< : <59 4 ; ; 5 5 : ; 5 5 : : : METALLURGICAL ENGINEERING 1. Jain, S.K. : An Introduction to Metallurgical Analysis Reprinted, Johnson Weeks : Metallurgy *3. Panigrahi : Testing, Evaluation and Measurements in Metal Castings *4. Ray : Extraction of Non-Ferrous Metals I. P. Singh etc. : Materials Science and Engineering th Edition 2014 DICTIONARIES AND REFERENCE BOOKS 1. Jain s Dictionary of Civil Engineering 5th Rev. Ed., Jain s Dictionary of Electrical Engineering In Press 2nd Ed., Jain s Dictionary of Mechanical Engg., 2nd Ed., Jain s Dictionary of Electronics, 1st Ed., 2012 In Press 5. Jain s Dictionary of Energy In Press 6. Jain s Dictionary of Environment In Press 7. Jain s Dictionary of Computer Science In Press ENVIRONMENTAL SCIENCE 1. Chandoke. K.R. : Ba sic Concepts of Disaster Management, 1st Ed., Chandoke. K.R. : Environmental Engineering and Disaster Management 1st Ed., 2012

14 14 2. Chauhan, A. S. : Environmental Studies, 3rd Ed., Chauhan, A. S. : Environmental Science, 2nd Ed., Chauhan A. S. : Int. to Energy, Environment Ethics & Society 1st Ed., 2009 (According to RGPV syllabus) Muralikrishna : Our Environment Muralikrishna : An Int. to ISO Rama Raju & : Environmental Sanitation Muralikrishna 9. Muralikrishna : A Treatise on Rural, Municipal & Industrial Water Management *10. Slaymaker : Physical Geography and Global & Spencer Environmental Change RECOMMENDED BOOKS AS PER NEW SYLLABUS EFFECTIVE SUMMER 2005, SECTION-A (DIPLOMA) 1. R. S. Vaishwanar : Fundamentals of Design and Manufacturing, 8th Ed., 2014 Rs I. P. Singh, : Material Science and Engineering Rs Subhash Chander 12th Ed., A. S. Chauhan : Society and Environment, Rs th Rev. Ed., Chandwani, Jain : Computing and Informatics Rs Chaudhari 4th Ed., 2014 RECOMMENDED BOOKS AS PER NEW SYLLABUS EFFECTIVE SUMMER 2005, SECTION-A (NON-DIPLOMA) 1. R. S. Vaishwanar : Fundamentals of Design and Manufacturing, 8th Ed., I. P. Singh, : Material Science and Engineering Subhash Chander 12th Ed., A. S. Chauhan : Society and Environment, th Rev. Ed., Chandwani, Jain : Computing and Informatics Chaudhari 4th Ed., Mathur & : Engineering Drawing & Graphics Vaishwanar 4th Ed., (Rep. 2013) 6. Mathur, Mehta & : Mechanical Science Vaishwanar 3rd Ed., Rep K. C. Jain : Electrical Science, 5th Ed., Rep

15 15 8. K. C. Jain : Electronics & Instrumentation nd Ed., Rep S. Chander : Engineering Physics & Chemistry Sashi Bhushan Jha 5th Ed., (Rep. 2013) 10. Karaiya : Engineering Mathematics, th Ed., Rep A.M.I.E. SECTION (B) EFFECTIVE SUMMER 2005 (COMPULSORY SUBJECTS FOR ALL BRANCHES) 1. A.S. Chauhan : Engineering Management th Ed., 2013 RECOMMENDED TEXT BOOKS AS PER SYLLABUS (EFFECTIVE SUMMER 2005) MECHANICAL ENGINEERING 1. R.S. Vaishwanar : Mechanics of Solids (MC 403) th Ed., Mathur and Mehta : Mechanics of Fluids (MC 404) th Ed., Mathur and Mehta : Thermal Science and Engineering (MC 405) 3rd Ed., R.S. Vaishwanar : Manufacturing Technology and R. K. Prasad (MC 406) 6th Ed., J. C. Pant : Optimisation-Theory and Applications (MC 422) 7th Ed., Rajesh Prasad and : Non-Conventional Energy Sources T. P. Ojha (MC-413) 4th Ed., Rajesh Prasad & : Production Management (MC-435) Bijoya Prasad 2nd Ed., Khandwawala : Thermodynamics Approach for Refrigeration and Airconditioning (MC-411) 1st Ed., 2011 CIVIL ENGINEERING 1. R. K. Gupta : Civil Engineering Materials and Construction Practices (CV-403) 4th Ed., 2014

16 16 2. Subhash Chander : Geotechnical and Foundation Engineering (CV-404) 4th Ed., Subhash Chander : Water Resources Systems and Rajesh Prasad (CV-405) 3rd Ed., R. K. Gupta and : Principal of Geoinformatics Subhash Chander (CV-406) 5th Ed., R.S. Vaishwanar : Analysis and Design of Structures Subhash Chander (CV-407) 2nd Ed., Subhash Chander : Construction Management System nd Ed., K.R. Chandoke : Principles of Environmental (In press) Engg., 1st Ed., 2014 ELECTRICAL ENGINEERING 1. Pauddar : Elements of Power Electronics, nd Ed., 2013 *2. Jairath : Problems and Solutions of Control Systems 4th Ed. COMPUTER SCIENCE AND ENGINEERING 1. J. D. Kumar : Fund. of Data Structures, 2nd Ed., Sanjay Gupta : System Analysis and Design (In Press) 1st Ed., 2014 SOLVED AND UNSOLVED PAPERS SEC. A (DIPLOMA STREAM) 1. Question Papers Diploma (With Syllabus) Fundaments of Design and Manufacturing (AD-301) Materials Science and Engineering (AD-302) Computing and Informatics (AD-303) Society and Environment (AD-304) SOLVED AND UNSOLVED PAPERS SEC. A (NON-DIPLOMA STREAM) 1. Question Papers Set (With Syllabus) Fundamentals of Design and Manufacturing (AN-201) Materials Science and Engineering (AN-202) Computing and Informatics (AN-203) Society and Environment (AN-204)

17 17 6. Mechanical Science (AN-205) Engineering Physics and Chemistry (AN-206) Engineering Drawing and Graphics (AN-207) Electronics and Instrumentation (AN-208) Engineering Mathematics (AN-209) Electrical Science (AN-210) A.M.I.E. SECTION (B) COMPULSORY FOR ALL BRANCHES EFFECTIVE SUMMER Engineering Management (IC-402) CIVIL ENGINEERING SECTION (B) SOLVED AND UNSOLVED PAPERS 1. Question Papers Set (With Syllabus) Civil Engineering Materials and Construction Practices (CV-403) Geotechnical and Foundation Engineering (CV-404) Water Resources Systems (CV-405) Principles of Geoinformatics (CV-406) Analysis and Design of Structures (CV-407) Principles of Env. Engineering (CV-421) Environment Engg. Process and Management (CV 422) Transportation Engineering (CV-431) Traffic & Transport Planning (CV-432) Town Planning and Rural Dev Design of Water and Waste Water Treatment (CV 424,434) Design of RCC and Prestressed Concrete Structures (CV412) Air Pollution and Its Control (CV423) Waste Management and Environ. Impact Assessment (CV-425) Construction Management Systems MECHANICAL ENGINEERING SECTION (B) SOLVED AND UNSOLVED PAPERS 1. Question Papers Set (With Syllabus) Mechanics of Solids (MC-403) Mechanics of Fluids (MC-404) Thermal Sciences and Engineering (MC-405)

18 18 5. Manufacturing Technology (MC-406) Design of Machine Elements (MC-407) Refrigeration and Airconditioning (MC-411) Internal Combustion Engines (MC-414) Power Plant Engineering (MC-412) Non-Conventional Energy Systems (MC-413) Turbomachinery (MC-415) Design of Mechanical Systems (MC-421) Manufacturing Science (MC-431) Computer Aided Manufacturing (MC-432) Tool and Die Design (MC-433) Manufacturing Automation (MC-434) Production Management (MC-435) ELECTRICAL ENGINEERING SECTION (B) SOLVED AND UNSOLVED PAPERS 1. Question Papers Set (With Syllabus) Power Systems (EL-403) Circuit and Field Theory (EL-404) Electrical Machines (EL-405) Measurement and Control (EL-406) Design of Electrical Systems (EL-407) Energy Systems (EL-411) High Voltage Engineering and Power Apparatus (EL-413) Power Electronics (EL-412, 422) Microprocessor and Microcontrollers (EL-415, 425, 435) Power Systems Performance (EL-414) Electrical Drives (EL-423) Electrical Power Utilisation (EL-424) Advance Aspects of Electrical Machines (EL 421) Instrumentation Systems (EL 434) ELECTRONICS AND COMMUNICATION ENGINEERING SECTION (B) 1. Question Papers Set (With Syllabus) Communication Engineering (EC-403) Circuit Theory and Control (EC-404)

19 19 4. Microprocessor and Microcontrollers (EC-405) Electronic Circuits (EC-406) Design of Electronic Devices and Circuits (EC-407) Broadcast & Television Engg. (EC-411) Radar and Antenna Engg. (EC-412) Microwave Engg. (EC-413) Optical & Satellite Communication (EC-414) Pulse and Digital Circuits (EC-422) Digital Hardware Design (EC-421) Solid State Physics & Semiconductor Devices (EC-424) Software Engineering (EC-425) Computer Networks and Communications (EC-415) Sensors & Transducers (EC-431) Control Systems EC-435) Industrial Inst. and Control (EC-432) I. C. Design Techniques (EC-423) Biomedical Electronics (EC-433) COMPUTER SCIENCE AND ENGINEERING SECTION (B) 1. Question Paper Set (With Syllabus) Data Structures (CP-403) Programming Languages (CP-404) Pulse and Digital Circuits (CP-405) Computer Architecture (CP-406) System Analysis & Design (CP-407) Computer Networks (CP-412, 422) Database Management Systems (CP-415) Microprocessor and Microcontrollers (CP-425) Software Engineering (CP-435) Operating Systems (CP 413) BOOKS UNDER PREPARATION 1. Jain's : Dictionary of Energy In press 2. Jain's : Dictionary of Environment In press 4. Rajesh Prasad : Design of Machine Elements In press

20 20 M/s JAIN BROTHERS 16/873, East Park Road, Karol Bagh, Near Dr. N.C. Joshi Hospital, New Delhi Phones: (011) , , Fax: Website: For South India Write to:- M/s SUNIL BOOK SERVICE Fatima Nagar, Opp. Andhra Bank Kazipet , (ANDHRA PRADESH) Phone: , Mobile: Books can be sent by VPP also Prices are Subject to Change Without Notice Send your valuable orders along with M. O. or Draft as advance Note:- Bol d i tems i ndi cate new ti tl e or new edi ti on.