Temperature Variation. Temperature Fluctuation at 37 [± / ] Temperature Variation. Temperature Fluctuation 0.5 / / 0.18

Transcription

1 General Incubators. Low Temperature Incubators. Low Temperature Personal Incubators. Incubated & Refrigerated & Illuminated Shakers. Selection Guide Incubators General type Economic type Description Operating Temp. Range ( / ) Chamber Volume (L /cu ft) Temperature Fluctuation at 37 [± / ] Temperature Variation at 37 [± / ] IB-05G 60 / / 1.08 Amb. +5 to / 0.18 IB-15G 102 / / 0.36 / Amb. +9 to 158 IB-25G 151 / / / 1.08 IB-01E 65 / / / 1.08 Amb. +3 to 60 IB-11E 150 / / / 1.44 / Amb to 140 IB-21E 205 / / / 1.98 Page Low Temperature Incubators Convection type Air Jacket type Personal type Description Operating Temp. Range ( / ) Chamber Volume (L /cu ft) Temperature Fluctuation at 37 [± / ] Temperature Variation at 37 [± / ] Page IL to / / / IL -21 / +32 to / / 0.72 IL -11A +4 to / / / IL -21A / to / 9.0 ILP ~40 at ambient 14 / / / ILP -12 temperature / / 0.72 Incubated & Refrigerated & Illuminated Shakers Benchtop type Floor type Chamber type SI-300 SI-600 SI-300R SI-600R IS-971 IS-971R Description IS-971RF SIF-5000 SIF-6000 SIF-5000R SIF-6000R Incubated Shakers Incubated & Refrigerated Shakers Incubated Shakers Incubated & Refrigerated Shakers Incubated & Refrigerated & Illuminated Shakers Incubated Shakers Incubated & Refrigerated Shakers Operating Temp. Range ( / ) Amb. +5 to 60 / Amb. +9 to to 60 / +59 to 140 Amb. +5 to 60 / Amb. +9 to to 60 / +40 to 140 Amb. -15 to 60 / Amb. -27 to 140 Amb. +5 to 80 / Amb.+9 to 176 Amb. -20 to 80 / Amb. -36 to 176 Speed Range [RPM] 10 to to 300 (Stackable Top : 10 to 250) Maximum Amplitude Size (dia) 40mm (1.6 dia) 70mm (2.8 dia) 19 mm dia (0.75 dia) 25 mm dia (1.0 dia) 19 mm dia (0.75 dia) 25 mm dia (1.0 dia) Page Accessories & Options Description for Incubators for Incubated & Refrigerated & Illuminated Shakers Page 52-54

2 General Applications General applications General, Low temp. & Low temp. personal Incubators Incubated & Refrigerated & Illuminated Skakers IB series IL series ILP series SI & SIF series IS series Antibody Testing Bacterial Research Bacterial suspensions Chemical Storage Chick Embryo Studies Clinical Science Cultivating Low Temperature Microbes and Plant Cells Crystallization Studies Cultivating Thermophilic Bacteria Drying And Staining Procedures Denaturalizing Tests for Food Environmental technology (waste water and soil analysis) Enzyme Digestion Studies Extraction procedures Fermentation (Pharmacy and biotech -DNA and Enzymes) General mixing Hematological Testing Histochemical Procedures Measuring COD/ BOD Medical researches. (Diagnostic tests) Microbiological Determinations Microorganism Molecular biology Organism Germs for Life Science Organism Pharmacy Paraffin Embedding Pharmaceutical Stability Testing Plasmid purification Protein expression in bacteria Solubility Staining and destaining Tissue Culturing * General purpose use and storage applications Technical Benefits Safety functions 1) Self-protecting cut-off function and signal - For over temperature, the power supply is automatically cut from the heater and controller systematically before the unit shuts down. - 2 separate over-current fuses for user safety. 2) Time setting function for automated ON / OFF. - Integrated time setting: Delayed ON / OFF. (from 1 min to 99 hr 59 min) - Operating settable function: After a power interruption, select automated run or manual run. 3) Door-open warning alarm : - Intermittent tone and optical signal alarm 5 min. after automated cut-off. - Heating element and fan automaically stop when door opening to minimize heat loss and protect operator. Optimum control performance 1) Profession electronic controls and program control. - Microprocessor PID temperature control with very simple calibration and auto-tuning features. - Conveniently preset 3 most commonly used temperature settings. - Select between Celsius and Fahrenheit. - Self-diagnostic function identifies any errors and advises the user with the correct procedure. 2) Applicable control display considering HMI (Human Machine Interface) network system : - Very similar key arrangement throughout the whole temperature chambers, bath circulators and shakers series. - Operator-friendly controller with the splashproof / easy-to-clean keypads and clear LED displays. - A quick lock button prevents accidental resetting of parameters. (Only incubatator series) - Shaker and lamp mechanism have their own ON / OFF switch for independent incubation. (Only SI, SIF, IS-971RF series) Ideal construction 1) High quality 304 grade stainless steel inner chamber and dirt-repellent powder coating external surface. 2) Perfectly sealed door gasket minimizes heat loss and fully insulated chambers keep the exterior at a safe temperature. 3) Adjustable stainless steel and electro polished wire shelves allows for better air-flow and allow for easy clean. (Only IB, SIF series)

3 Incubators - General type Exclusive gravity convection type incubators for all laboratory purposes. IB-G series are the most useful incubators for general purpose use air-jacketed convection style for excellent temperature variation without external air disturbance. 40 Operating features +5 above room temperature to 70. Microprocessor PID control / Auto-tuning / Calibration. Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. Over-temperature limiter / Door open alarm. 3 different temperature values memorable. Digital LED display (0.1 resolution) using touch-sensitive keypads. RS-232 interface available. IB-05G Included Accessories Optional Accessories see page 52 2 wire shelves Perforated shelves Stacking kits for stackable chambers Constructional features Fully insulated dual-wall door with rubber magnetic seal gasket keeps setting temperature. Stackable two high using the stacking kit. (optional) Optimized sample inspection through a tempered inner glass door without affecting the chamber temperature. Detachable shelves and rounded inner chamber corners for easy cleaning. Highly durable incoloy heating element with fins that guarantee better radiation. Attach other electric instruments to the inside of the chamber through a side cable port. Cable port allow for control of the amount of airflow in the chamber. (dia 38mm/1.5, Provided silicon or rubber cap) Specifications & Ordering Informations Model IB-05G IB-15G IB-25G Chamber Volume (L / cu ft) 60 / / / 5.3 Range ( / ) Amb. +5 to 70 / Amb. +9 to 158 Temperature Fluctuation 1) (± / ) at / / / 0.36 Variation 1) (± / ) at / / / Interior (mm / inch) / / / Dimensions (W D H) Exterior (mm / inch) / / / Net weight (Kg / lbs) 45 / / / 136 Electrical Requirements (230V, 50 / 60Hz) 1.3A 2.2A 3.1A Cat. No. AAH21162K AAH21172K AAH21182K Electrical Requirements (120V, 50 / 60Hz) 2.8A 4.6A 6.4A Cat. No. AAH21166U AAH21176U AAH21186U 1) Technical data. (according to DIN 12880)

4 Incubators - Economic type Space saving design and dependable, trouble-free heating system. IB-E series complete inner chamber is a film type heater that is perfectly safe, it is vibration and noise free, and in addition it is most likely to not have mechanical troubles. 41 Operating features +3 above room temperature to 60. Microprocessor PID control / Auto-tuning / Calibration. Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. Over-temperature limit / Door open alarm. Preset 3 most commonly used temperature settings. Digital LED display (0.1 resolution) using touch-sensitive keypads. Constructional features Completely safe anti-vibration design is helpful for cultivating yeast. Space saving dimensions, lightweight, and compact design with fully sealed gasket. Stackable two high using the stacking kits. (optional) Without affecting the chamber temperature Sample inspection viewing is made easy due to the inner tempered glass door. Detachable shelves and rounded inner chamber corners allow for easy cleaning. IB-01E Included Accessories Optional Accessories see page 52 2 wire shelves Perforated shelves Stacking kits for stackable chambers Specifications & Ordering Informations Model IB-01E IB-11E IB-21E Chamber Volume (L / cu ft) 65 / / / 7.2 Range ( / ) Amb. +3 to 60 / Amb to 140 Temperature Fluctuation 1) (± / ) at / / / 0.18 Variation 1) (± / ) at / / / Interior (mm / inch) / / / Dimensions (W D H) Exterior (mm / inch) / / / Net weight (Kg / lbs) 33 / / / Electrical Requirements (230V, 50 / 60Hz) 1.1A 2.2A 2.4A Cat. No. AAH26015K AAH26025K AAH26035K Electrical Requirements (120V, 50 / 60Hz) 2.1A 4.2A 4.6A Cat. No. AAH26016U AAH26026U AAH26036U 1) Technical data. (according to DIN 12880)

5 Low Temperature Incubators Please visit.com For further information on Jeio Tech s Low Temperature Incubators products Information is readily available on our website. 42 IL-21 / IL-21A

6 Low Temperature Incubators - Forced Convection Intensive low temperature incubating performance with compressor cooling system. IL series has an excellent HBP type compressor cooling system which is noiseless and reduces water-evaporation within the chamber. 43 Operating features 0 to 60. Microprocessor PID control / Auto-tuning / Calibration. Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. Over-temperature limit / Door open alarm. Preset 3 most commonly used temperature settings. 9 step temperature and up to 200 cycles of repetition programmable for each profile. Adjustable 3 step fan speed with defrosting time / period control. Digital LED display (0.1 resolution) using touch-sensitive keypad. RS-232 interface available. Constructional features Forced-air convection with an optimal cross flow type fan for excellent variation. Large size chamber with maximum of 244L. (8.6cu ft) One electrical outlet with a safety cover which other electronic instruments can be used in the chamber. Viewing is made easy due to the inner tempered glass door. Detachable shelves and rounded inner chamber corners allow for easy cleaning. IL-21 Included Accessories 2 wire shelves for IL wire shelves for IL -21 Optional Accessories see page 52 Perforated shelves Specifications & Ordering Informations Model IL -11 IL -21 Chamber Volume (L / cu ft) 150 / / 8.6 Refrigerator (Hp) 1 / 8 HBP 1 / 6 HBP Range ( / ) 0 to 60 / +32 to 140 Temperature Fluctuation 1) (± / ) at / 0.18 Variation 1) (± / ) at / / Interior (mm / inch) / / Dimensions (W D H) Exterior (mm / inch) / / Net weight (Kg / lbs) 100 / / Electrical Requirements (230V) 50Hz, 4.5A 60Hz, 4.5A 50Hz, 6.4A 60Hz, 6.4A Cat. No. AAH22042K AAH22041K AAH22052K AAH22051K Electrical Requirements (120V) 60Hz, 8.3A 60Hz, 10.6A Cat. No. AAH22046U AAH22056U 1) Technical data (according to DIN 12880)

7 Low Temperature Incubators - Air-jacket Air-jacketed convection type incubators, prevent outside air disturbance in the inner chamber and has excellent temperature variation. IL-A series is perfectly safe from water-evaporation due to the use of an evaporator cooling system or blower, especially ideal for incubating tests that consist of easily drying samples outside. 44 Operating features +4 to 60. Microprocessor PID control / Auto-tuning / Calibration. Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. Over-temperature limit / Door open alarm. Preset 3 most commonly used temperature settings. 9 step temperature and up to 200 cycles of repetition programmable for each profile. Adjustable defrosting time / period control. Digital LED display (0.1 resolution) using touch-sensitive keypad. RS-232 interface available. IL-11A Included Accessories Optional Accessories see page 52 2 wire shelves for IL-11A 3 wire shelves for IL-21A Perforated shelves Constructional features Air-jacketed type: independently exchanges heat outwardly with inner gravity convection. Large size chamber with a maximum volume of 254L. (9cu ft) One electrical outlet with safety cover allows use of other electric instruments in the chamber. Viewing is made easy due to the inner tempered glass door. Detachable shelves and rounded inner chamber corners allow for easy cleaning. Specifications & Ordering Informations Model IL -11A IL -21A Chamber Volume (L / cu ft) 162 / / 9.0 Refrigerator (Hp) 1 / 6 HBP 1 / 4 HBP Range ( / ) +4 to 60 / to 140 Temperature Fluctuation 1) (± / ) at / 0.36 Variation 1) (± / ) at / Interior (mm / inch) / / Dimensions (W D H) Exterior (mm / inch) / / Net weight (Kg / lbs) 108 / / Electrical Requirements (230V) 50Hz, 6.9A 60Hz, 6.9A 50Hz, 8.4A 60Hz, 8.4A Cat. No. AAH22062K AAH22061K AAH22072K AAH22071K Electrical Requirements (120V) 60Hz, 10.2A 60Hz, 12.3A Cat. No. AAH22063U AAH22073U 1) Technical data. (according to DIN 12880)

8 Low Temperature Personal Incubators Compact, lightweight with reliable incubating performance for important testing. ILP series has a thermal electric module-peltier cooling chip type which is very quiet, with no vibration, and small generation of heat to just fit a bench-top personal incubator! 45 Operating features +10 to 40 at room temperature 25. Microprocessor PID control / Auto-tuning / Calibration. Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. Over-temperature limit. Preset 3 most commonly used temperature settings. 9 step temperature and up to 200 cycles of repetition programmable for each profile. Adjustable 3 step fan speed with defrosting time / period control. Digital LED display (0.1 resolution) using touch-sensitive keypad. RS-232 interface available. Constructional features Tempered inner glass door is equipped with all models! (14L / 48L) Maximum mL Erlenmeyer flasks can be stored in the smallest chamber. (14L) Environment-friendly insulation material-epdm used for safety and convenience. (ASTM-C534) Space-saving compact size on bench-top and easily stackable. ILP-02 stackable chambers Included Accessories Optional Accessories see page 52 1 wire shelf for ILP-02 2 wire shelves for ILP-12 Perforated shelves Specifications & Ordering Informations Model ILP -02 ILP -12 Chamber Volume (L / cu ft) 14 / / 1.7 Range ( / ) 10~40 (50~104 ) at ambient temperature 25 Temperature Fluctuation 1) (± / ) at / 0.18 Variation 1) (± / ) at / / Interior (mm / inch) / / Dimensions (W D H) Exterior (mm / inch) / / Net weight (Kg / lbs) 27.5 / / 108 Electrical Requirements (230V) 50Hz, 1.8A 60Hz, 1.8A 50Hz, 3.5A 60Hz, 3.5A Cat. No. AAH24032K AAH24031K AAH24042K AAH24041K Electrical Requirements (120V) 60Hz, 3.4A 60Hz, 6.7A Cat. No. AAH24033U AAH24043U 1) Technical data. (according to DIN 12880)

9 Incubated Shakers - Benchtop type Please visit.com For further information on Jeio Tech s Incubated Shaker products Information is readily available on our website. 46 SI-600R Optional Accessories see page Universal / Dedicated platforms, Rubber mats, Universal attachments Flask clamps, Funnel clamps Test tube racks, Spring wire racks Microplate holders (three styles) Lab sticker SI-600R Control Display

10 Incubated Shakers - Benchtop type Digital incubating/ refrigerating benchtop shakers. Combines a benchtop incubator, refrigerator with dual-action in orbital and reciprocating shaker. Fulfills a variety of molecular biology, general incubation, and cell culture applications. Shaking features Select between orbital or reciprocating action. Speed range: 10 to 300 rpm. Programmable shaking motion. - Run time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 59 sec. Maximum orbit size: 40mm dia. (1.6 dia.) 47 Operating features +5 above room temperature to 60 for SI-300, to 60 for SI-300R, 600R. Microprocessor PID control / Auto-tuning / Calibration. Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. Over-temperature limit / Door open alarm. Digital LED display for temperature (0.1 resolution), speed, and shaking motion. Preset 3 most commonly used temperature settings. 9 step temperature and up to 200 cycles of repetition programmable for each profile. Adjustable 3 step fan speed. RS-232 interface available. Inside of SI series Constructional features Brushless DC motor for long maintenance-free use. High-velocity fan ensures rapid thermal recovery and excellent temperature variation. Gas spring door and lid guards against sudden closures. Acryl lid and inner lamp functions allow observation of flask contents. Uses CFC-free refrigerant. (for SI - 300R, 600R) Attached fluorescent lamp offered bright observation in a chamber. Specifications & Ordering Informations Temperature Shaking system Dimensions Model SI-300 SI-300R SI-600 SI-600R Range ( / ) Amb. +5 to 60 (Amb. +9 to 140) for SI-300, to 60 (+59 to 140) for SI-300R, 600R Fluctuation 1) at 37 (± / ) 0.3 / / / / 0.36 Variation 1) at 37 (± / ) 1.6 / / / / 0.54 Refrigerator (Hp) - 1 / 8 HBP (220V, 230V) 1 / 8 HBP (220V, 230V) - 1 / 6 HBP (100V, 120V) 1 / 6 HBP (100V, 120V) Motion type Orbital or Reciprocating motion selectable Speed range (RPM) 10 to 300 Timer Run time: 10 sec to 999 hr 59 min 59 sec Forward & Backward, Pause: 10 sec to 59 min 59 sec Amplitude size (mm / inch, dia.) 20, 30, 40 / 0.8, 1.2, 1.6 Available - Standard 30 / 1.2 Recip stroke length (mm / inch) 20, 30, 40 / 0.8, 1.2, 1.6 Available - Standard 30 / 1.2 Volume (L / cu ft) 53 / / 2.9 Platform (W D) (mm / inch) / / Internal (W D H) (mm / inch) / / Overall (W D H) (mm / inch) / / Net weight (Kg / lbs) 74 / / / / 225 Electrical Requirements (230V) 50 / 60Hz, 4.0A 60Hz, 5.5A 50Hz, 5.5A 50 / 60Hz, 4.0A 60Hz, 5.5A 50Hz, 5.5A Cat. No. AAH23105K AAH23111K AAH23112K AAH23205K AAH23211K AAH23212K Electrical Requirements (120V) 50 / 60Hz, 7.5A 60Hz, 10.1A 50 / 60Hz, 7.5A 60Hz, 10.1A Cat. No. AAH23106U AAH23113U AAH23206U AAH23213U 1) Technical data. (according to DIN 12880)

11 Incubated Shakers - Floor type Please visit.com For further information on Jeio Tech s Incubated Shaker products Information is readily available on our website. Certification only for the IS-971/971R 48 IS-971R Optional Accessories see page Universal / Dedicated platforms, Rubber mats, Universal attachments Flask clamps, Funnel clamps Test tube racks, Spring wire racks Microplate holders (three styles) Lab sticker IS-971R Control Display

12 Incubated Shakers - Floor type Large and heavy capacity shaking with rapid heating / cooling performance. Advanced shaking for heavy workload and flask up to maximum 4 6L. Exclusive drive mechanism delivers years of dependable service. Shaking features Select between orbital or reciprocating action. Speed range: 10 to 300 rpm. Programmable shaking motion. - Run time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 59 sec. Maximum orbit size: 70mm dia. (2.8 dia.) 49 Operating features +5 above room temperature to 60 for IS above room temperature to 60 for IS-971RF +4 to 60 for IS-971R. Microprocessor PID control / Auto-tuning / Calibration. Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. Over-temperature limit/ Door open alarm. Digital LED display for temperature (0.1 resolution), speed, and shaking motion. Preset 3 most commonly used temperature settings. 9 step temperature and up to 200 cycles of repetition programmable for each profile. Adjustable 3 step fan speed with defrosting time / period control. RS-232 interface available. Inside of IS series Constructional features Brushless DC motor for long maintenance-free use. High-velocity fan ensures rapid thermal recovery and excellent temperature variation. Viewing window in top-opening provides a clear inner chamber view, minimizing the need for opening the lid. (without IS - 971RF) Controlling 5 steps illumination lamp available. (Max. 12,000 lux IS-971RF) Gas spring door and lid guards against sudden closures. Casters easily makes the unit mobile. Door can be secured with a lock and key. Uses CFC-free refrigerant. (for IS-971R, IS-971RF) Specifications & Ordering Informations Certification only for the IS-971/971R Model IS-971 IS-971R IS-971RF Range ( / ) Amb. +5 to 60 / Amb. +9 to to 60 / +40 to 140 Amb. -15 to 60 / Amb. -27 to 140 Temperature Fluctuation 1) at 37 (± / ) 0.2 / 0.36 Variation 1) at 37 (± / ) 0.8 / 1.44 Refrigerator - 1 / 3 LBP (AC 120V) 1 / 3 LBP (AC 120V) - 1 / 6 HBP (AC 230V) 1 / 4 HBP (AC 230V) Motion type Orbital or Reciprocating motion selectable Speed range (RPM) 10 to 300 Shaking Run time : 10 sec to 999 hr 59 min 59 sec Timer system Forward & Backward, Pause: 10 sec to 59 min 59 sec Amplitude size (mm / inch, dia.) 30, 40, 50, 60, 70 / 1.2, 1.6, 2.0, 2.4, 2.8 Available - Standard 30 / 1.2 Recip stroke length (mm / inch) 30, 40, 50, 60, 70 / 1.2, 1.6, 2.0, 2.4, 2.8 Available - Standard 30 / 1.2 Volume (L / cu ft) 270 / 9.5 Platform (W D) (mm / inch) / Internal (W D H) (mm / inch) / Dimensions 1, ,045 / 1, ,075 / Overall (W D H) (mm / inch) Net weight (Kg / lbs) / / / Electrical Requirements (230V) 50 / 60Hz, 5.2A 60Hz, 7.3A 50Hz, 7.3A 60Hz, 9.3A 50Hz, 9.3A Cat. No. AAH23306K AAH23321K AAH23322K AAH23351K AAH23352K Electrical Requirements (120V) 60Hz, 11.2A 60Hz, 13.8A 60Hz, 17.0A Cat. No. AAH23336U AAH23346U AAH23356U 1) Technical data. (according to DIN 12880) Certification only for the IS-971, IS-971R.

13 Incubated Shakers - Chamber type Please visit.com For further information on Jeio Tech s Incubator products Information is readily available on our website. 50 SIF-6000R Included Accessories Optional Accessories see page wire shelves Universal / Dedicated platforms, Rubber mats, Universal attachments Flask clamps, Funnel clamps Test tube racks, Spring wire racks Microplate holders (three styles) Lab sticker SIF-6000R Control Display

14 Incubated Shakers - Chamber type Space- saving provides various locations on/under your lab benches, or double-stacked on the Floor Multi-purpose laboratory incubated shakers accept flasks up to 2ea x 6 L (SIF-6000(R)). Two adjustable-height shelves provide added incubating or storage samples. Shaking features Select between orbital or reciprocating action. Speed range: 10 to 300 rpm. (Stackable Top :10 to 250) Programmable shaking motion. - Run time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 59 sec. Maximum orbit size : 19mm / 0.75 dia (SIF 5000/R), 25mm / 1.0 dia (SIF 6000/R) 51 Operating features +5 above room temperature to 80 for SIF-5000/ below room temperature to 80 for SIF-5000R/6000R Microprocessor PID control / Auto-tuning / Calibration. Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. Over-temperature limit / Door open alarm. Digital LED display temperature (0.1 resolution), speed and shaking motions. Preset 3 most commonly used temperature settings. 9 step temperature and up to 200 cycles of repetition programmable for each profile. Adjustable fan speed within 3 steps and defrosting time / period control. RS-232 interface available. Inside of SIF series Constructional features Brushless DC motor for long maintenance-free use. Stackable 2 steps up to maximize spave efficiency. High-velocity fan ensures rapid thermal recovery and excellent temperature variation. Viewing window in the front-opening provides a clear inner chamber view, minimizing the need for opening the lid. Observation lamp as standard. Electrical socket inside chamber provides power to small equipments Casters easily makes the unit mobile. Door can be secured with a lock and key. Uses CFC-free refrigerant. (For SIF-5000R/6000R) Specifications & Ordering Informations Model SIF-5000 SIF-5000R SIF-6000 SIF-6000R Range ( / ) Amb.+5 to 80 [Amb.+41 to 176] for SIF -5000, 6000 Amb.-20 to 80 [Amb. -4 to 176] for SIF -5000R, 6000R Temperature 1) Fluctuation at 37 (± / ) 0.1 / 0.18 Variation at 37 (± / ) 1.0 / 1.8 Refrigerator (Hp) - 1/8Hp, HBP - 1/6Hp, HBP Motion type Orbital or Reciprocating motion (Default : Orbital motion) Speed range (RPM) 10 to 300 (Stackable Top :10 to 250) Shaking Run time(10sec ~ 999hr 59min 59sec) Timer system Pause, Forward, Backward(10sec ~ 59min 59sec) Amplitude size (mm / inch, dia.) 13, 19 / 0.5, 0.75 Available - Standard 19 / 0.75 Recip stroke length (mm / inch) 19, 25 / 0.75, 1.0 Available - Standard 25 / 1.0 Volume (L / cu ft) 80 / / 5.3 Platform (W D, mm / inch) / 13.8x / Dimensions Interior (W D H, mm / inch) / / Exterior (W D H, mm / inch) / / Shelves (Standard / Max) 2 / 8 2 / 11 Net weight (kg / Ibs) 120 / / / / Electrical Requirements (230V) 50 / 60Hz, 5.4A 60Hz, 7.2A 50Hz, 7.2A 50 / 60Hz, 5.4A 60Hz, 7.3A 50Hz, 7.3A Cat. No. AAH27025K AAH27121K AAH27122K AAH27015K AAH27111K AAH27112K Electrical Requirements (120V) 60Hz, 11.1A 60Hz, 12.9A 60Hz, 11.2A 60Hz, 13.1A Cat. No. AAH27026U AAH27123U AAH27016U AAH27113U Permissible ambient Condition : Temperature 5 to 40, Maximum relative humidity 80% All specifications are under ambient temperature 20 (with refrigerator) / 25 (without refrigerator), no load 1) Technical data. (according to DIN 12880)

15 Accessories & Options for Incubators 52 Wire Shelves Perforated Shelves Universal Platforms Wire Shelves Stainless steel and electro polished shelf system is removed easily without using tools for easy cleaning. Cat. No. Models Description Included Maximum W L (mm / inch) EDA8136 IB-05G / EDA8135 IB-15G / EDA8137 IB-25G / EDA8136 IB-01E / EDA8220 IB-11E / EDA8219 IB-21E / EDA8219 IL-11 / 11A / EDA8220 IL-21 / 21A / EDA8223 ILP / EDA8221 ILP / AAA31521 SIF-5000 / R / AAA31522 SIF-6000 / R / Perforated Shelves Stainless steel shelf system is removed easily without using tools for easy cleaning. Cat. No. Models Description Maximum W L (mm / inch) AAA12531 IB-05G / AAA12532 IB-15G / AAA12535 IB-25G / AAA12531 IB-01E / AAA22522 IB-11E / AAA22521 IB-21E / AAA22521 IL-11 / 11A / AAA22522 IL-21 / 21A / AAA24501 ILP / AAA24502 ILP / Stacking Kits Stackable 2 steps up to maximize space efficiency with exclusive stacking kits. (Only for IB-G, IB-E series) Cat. No. Models Description AAA21521 IB-05G Stacking kits for stackable chambers AAA21522 IB-15G Stacking kits for stackable chambers AAA21523 IB-25G Stacking kits for stackable chambers AAA26501 IB-01E Stacking kits for stackable chambers AAA26502 IB-11E Stacking kits for stackable chambers AAA26503 IB-21E Stacking kits for stackable chambers

16 Accessories & Options for Incubators Funnel Clamps Flask Clamps Plastic Clamps 53 Universal platforms & Flask clamps, Funnel clamps The universal platforms provide flexibility for mixing different sized assortment of test tubes and glassware on a single platform. Available in different size assortment of clamps for Erlenmeyer flasks and Separatory funnels. Description SI-300(R) SI-600(R) SI-971(R/F) SIF-5000(R) SIF-6000(R) Universal platform Cat. No. AAA23501-V1 AAA23502-V1 AAA23503-V1 AAA31501-V1 AAA31502-V1 Max. mountable flask clamps * Cat. No. Steel Plastic Erlenmeyer flask size AAA23550 AAA30570 for 50mL AAA23551 AAA30571 for 100mL AAA23552 AAA30573 for 250mL AAA23556 AAA30574 for 300mL AAA23553 AAA30575 for 500mL AAA23554 AAA30576 for 1L AAA23555 AAA30577 for 2L AAA for 2.8L AAA for 4L AAA for 6L Max. mountable funnel clamps * Cat. No. Separating funnel size AAA23562 for 250mL AAA23563 for 500mL AAA23564 for 1L AAA23565 for 2L Dedicated platforms If using a single flask size only, the dedicated platforms provide maximum capacity, and come with clamps installed. Provided standard clamp size are 250mL and 500mL, but possibly provide the other size of clamps also. Cat. No. AAA23611 AAA23612 AAA23621 AAA23622 AAA23631 AAA23632 AAA31551 AAA31552 AAA31561 AAA31562 Description An universal platform for SI-300 series with 250mL flask clamps 13ea An universal platform for SI-300 series with 500mL flask clamps 9ea An universal platform for SI-600 series with 250mL flask clamps 18ea An universal platform for SI-600 series with 500mL flask clamps 13ea An universal platform for IS-971 series with 250mL flask clamps 39ea An universal platform for IS-971 series with 500mL flask clamps 25ea An universal platform for SIF-5000 series with 250mL flask clamps 13ea An universal platform for SIF-5000 series with 500mL flask clamps 10ea An universal platform for SIF-6000 series with 250mL flask clamps 24ea An universal platform for SIF-6000 series with 500mL flask clamps 16ea * A dedicated platform is sold with setting each max. mountable amount of flask clamps on.

17 Accessories & Options for Incubators 54 Rubber Mats Universal attachments Spring Wire Racks Spring wire racks Ideal for holding a wide variety of tubes, flasks, and other glassware. All component are made of stainless steel. Description SI-300(R) SI-600(R) SI-971(R/F) SIF-5000(R) SIF-6000(R) Spring wire racks Cat. No. AAA23521 AAA23522 AAA23523 AAA31521 AAA31522 Max. inserting flask clamps Erlenmeyer flask size for 50mL for 100mL for 250ml for 300mL for 500ml for 1L for 2L for 2.8L Rubber mats The non-skid rubber mats are designed for low-speed applications, allow for quick addition or removal of flasks, plates or tubes. Models SI-300(R) SI-600(R) SI-971(R/F) SIF-5000(R) SIF-6000(R) Cat. No. AAA23531 AAA23532 AAA23533 AAA31531 AAA31532 Universal attachments (Utility carriers) Several adjustable clamping bars to quickly secure a variety of glassware or tubes on non-skid rubber mat. Suitable for different sizes of flat bottomed flasks. Models SI-300(R) SI-600(R) SI-971(R/F) SIF-5000(R) SIF-6000(R) Cat. No. AAA31511 AAA31512 AAA31513 AAA31511 AAA31512 Please visit.com For further information on Jeio Tech s Incubators products Information is readily available on our website.

18 Accessories & Options for Incubators Microplate Holders Lab Sticker Test Tube Racks 55 Test tube racks Highly durable stainless steel racks with adjustable angle and tube height support. Simply release and mount racks. Requires an universal platform which are sold separately. Cat. No. Description Mountable capacity of racks * AAA23581 for 86 test tubes 8mm dia. (0.3 ) AAA23582 for 86 test tubes 10mm dia. (0.4 ) AAA23583 for 58 test tubes 12mm dia. (0.5 ) SI-300(R) SI-600(R) IS-971(R/ F) SIF Series SIF-6000 Series AAA23584 for 58 test tubes 14mm dia. (0.6 ) AAA23585 for 32 test tubes 16mm dia. 2EA 4EA 6EA 2 EA 4 EA (0.7 ) AAA23586 for 19 test tubes 25mm dia. (1.0 ) AAA23594 for 10 test tubes 35mm dia. (1.4 ) * No declination We can manufacture other size of test tube racks to meet your specific requirements. Contact us for details. Microplate holders Available in three styles. A Tower type holder, two Flat types (small and large) and a Single type. The large flat holders will hold 4 standard or deep well plates. The small flat holders will hold 3 standard or deep well plates. The single holders will hold only 1 standard or deep well plate. Microplate holders Tower type Flat-A type (large) Flat-B type (small) Single type Cat. No. AAA23651 AAA23652 AAA23653 AAA23654 Max. mountable holders SI-300(R) SI-600(R) IS-971(R / F) SIF-5000 (R) SIF-6000 (R) * Microplate holders need to be mounted on an universal platform which is sold separately. Lab Sticker Alternative to flask clamps for securing vessels to a shaker platform the ideal way to secure containers such as bottles and dishes on the universal platform is that cannot be held with conventional flask clamps. The lab sticker can be re-generated to a new condition by washing it with mild detergent and water. It cannot be used in water baths. For safe operation, suggest increasing the RPM gradually. Description Lab Sticker Lab Sticker Cat. No. AAA30551 Size (mm / inch, W D H) / * Lab Sticker need to be mounted on an universal platform which is sold separately.