WyoTech Laramie Catalog Addenda to Version XLI Effective 10/1/ /31/2014 Revision Date: 11/27/2013

Transcription

1 ADDENDUM, Effective November 27, 2013: The following program disclosures have been updated in the catalog. The following program disclosures are provided pursuant to federal law. "Occupation" data reflects the type of occupations the program generally prepares students to enter. (For government data regarding occupations, please navigate to To the extent permitted under the standards of the applicable accrediting agency or state agency, the placement rates reported below may reflect students who completed the program and obtained employment in one of the occupations listed in the standard occupational titles below or other occupations that utilize the core skills taught in the program. "On-Time Completion Rate" reflects the percent of graduates between July 1, 2012, and June 30, 2013, who completed their program within percent of the normal time frame as described in the school catalog or enrollment agreement. "Costs to Students" reflects the costs of the academic program for students completing the program on time, including tuition and fees, estimated books and supplies, and if applicable, room and board. Costs do not reflect potential increases and are current as of the publication date of this disclosure. "Placement Rates" reflects the percent of graduates securing employment as calculated pursuant to the required calculation methodologies and time frames of the applicable state agencies, institutional accrediting agencies or programmatic accrediting agencies. Each agency has different criteria in determining what constitutes a placement, and these placements may or may not be listed in the standard occupations listed below. (For more information about calculations and time frames, refer to the descriptions at the end of this disclosure.) "Median Loan Debt" reflects the median loan debt incurred by students who completed the program, between July 1, 2012, and June 30, 2013, including Title IV program loans, private educational loans and institutional financing plans. Unless otherwise noted below, the data included in this disclosure are for the entire educational institution as defined by the Department of Education, which may include a number of individual campus locations (even in different states) and both online and physical delivery modalities. See footnotes for a list of the campuses included in the institution. In many cases, the on-time completion rate, the cost to students, the placement rate and the median loan debt may differ (often significantly) between these physical locations and delivery modalities. The data below reflect averages for all students in all locations and delivery modalities (or, in the case of program cost, the ranges of program costs) across all locations and delivery modalities. Advanced Diesel Technology (Diploma) Occupation(Title, SOC Code) Bus & Truck Mechanics & Diesel Engine Specialists Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 81 Laramie Campus Institutional Accreditor 81 Median Loan Debt Title IV Program Loans $11,461 Auto/Diesel Vehicle Technology (Diploma) Occupation(Title, SOC Code) Bus and Truck Mechanics and Diesel Engine Specialists

2 Auto/Diesel Vehicle Technology (Diploma) Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 75 to State 71 Laramie Campus Institutional Accreditor Median Loan Debt Title IV Program Loans $11,544 Automotive Technology and Management (Associate) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 70 to 87 State 67 to 79 Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans $14,680 2

3 Automotive Technology and Management (Associate) Automotive Technology w/ Trim & Upholstery Technology (Diploma) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 71 State 68 to 80 Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans $11,544 Collision/Refinishing & Upholstery Technology (Diploma) Occupation(Title, SOC Code) Automotive Body and Related Repairers Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 50 to 72 State 68 Laramie Campus Institutional Accreditor 50 3

4 Collision/Refinishing & Upholstery Technology (Diploma) Median Loan Debt Title IV Program Loans $9,597 Collision/Refinishing Technology and Management (Associate) Occupation(Title, SOC Code) Automotive Body and Related Repairers Painters, Transportation Equipment Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 79 to 83 State 72 Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans $14,682 Diesel Advanced Technology Education for Mack Trucks and Volvo Trucks (Diploma) Occupation(Title, SOC Code) Institutions Tuition and Fees $29,250 Books and Supplies - Room and Board N/A Laramie Campus Tuition and Fees $29,250 Books and Supplies Room and Board N/A N/A On-Time Completion Rate N/A 4

5 Diesel Advanced Technology Education for Mack Trucks and Volvo Trucks (Diploma) Institutions Institutional Accreditor N/A Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans N/A Private Education Loans Institutional Financing Plans N/A N/A Diesel Technology and Management (Associate) Occupation(Title, SOC Code) Bus and Truck Mechanics and Diesel Engine Specialists Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 73 State 77 Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans $14,680 Diesel Technology w/ Trim & Upholstery Technology (Diploma) Occupation(Title, SOC Code) Bus and Truck Mechanics and Diesel Engine Specialists Institutions Tuition and Fees $29,250 5

6 Diesel Technology w/ Trim & Upholstery Technology (Diploma) On-Time Completion Rate Institutions Institutional Accreditor 0 State 33 Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans $11,461 Diesel/Auto Vehicle Technology (Diploma) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 75 to 94 State 88 Laramie Campus Institutional Accreditor 75 Median Loan Debt Title IV Program Loans $11,461 Motorsports Chassis Fabrication w/ Automotive Technology (Diploma) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Institutions Tuition and Fees $29,250 to $29,323 6

7 Motorsports Chassis Fabrication w/ Automotive Technology (Diploma) On-Time Completion Rate Institutions Institutional Accreditor 80 to 81 State 69 to 80 Laramie Campus Institutional Accreditor 81 Median Loan Debt Title IV Program Loans $9,597 Motorsports Chassis Fabrication w/ Collision/Refinishing Technology (Diploma) Occupation(Title, SOC Code) Automotive Body and Related Repairers Painters, Transportation Equipment Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 75 to 83 State 80 Laramie Campus Institutional Accreditor 75 Median Loan Debt Title IV Program Loans $9,597 Motorsports Chassis Fabrication w/ Diesel Technology (Diploma) 7

8 Motorsports Chassis Fabrication w/ Diesel Technology (Diploma) Occupation(Title, SOC Code) Bus & Truck Mechanics & Diesel Engine Specialists Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 80 to 83 State 78 Laramie Campus Institutional Accreditor 83 Median Loan Debt Title IV Program Loans $9,597 Street Rod & Custom Fabrication w/ Automotive Technology (Diploma) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Electronic Equipment Installers and Repairers, Motor Vehicles Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 77 to State 71 to 74 Laramie Campus Institutional Accreditor 8

9 Street Rod & Custom Fabrication w/ Automotive Technology (Diploma) Median Loan Debt Title IV Program Loans $11,544 Street Rod & Custom Fabrication w/ Collision/Refinishing Technology (Diploma) Occupation(Title, SOC Code) Automotive Body and Related Repairers Painters, Transportation Equipment Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 84 State 82 Laramie Campus Institutional Accreditor 84 Median Loan Debt Title IV Program Loans $9,597 Street Rod & Custom Fabrication w/ Diesel Technology (Diploma) Occupation(Title, SOC Code) Bus & Truck Mechanics & Diesel Engine Specialists Institutions Tuition and Fees $29,250 On-Time Completion Rate

10 Street Rod & Custom Fabrication w/ Diesel Technology (Diploma) Institutions Institutional Accreditor 50 to State 61 Laramie Campus Institutional Accreditor 50 Median Loan Debt Title IV Program Loans $11,461 Footnotes: Institutional Accreditor - ACCSC outcomes are calculated by program length, tracking start cohorts from their start date through graduation. Employment is calculated by taking the total graduates placed in field divided by the total number of graduates minus graduates waived for employment because of continuing education, military, health, incarceration, foreign students or death. Time Frame - To determine the cohort date range, the ACCSC calculation counts backwards from the report date as follows: program length times 1.5 plus 3 months for placement activity. State - California Bureau for Private Postsecondary Education (BPPE) calculation for placement rate: number of graduates employed in the field divided by the number of graduates available for employment for each program that is either (1) designed, or advertised, to lead to a particular career, or (2) advertised or promoted with any claim regarding job placement. Time Frame: January 1, 2010 through December 31, State - Pennsylvania Department of Higher Education calculation for placement rate: number of graduates employed in related field divided by total graduates minus continued post secondary education and entered military. Time Frame: July 1, 2010 through June 30, Placement Rate N/A - There is no data to disclose because this program is too new or is not required to be calculated. On-Time Completion N/A - Per Education Department guidance, data not provided due to fewer than ten completers or program is too new. Median Load Debt N/A - Per Education Department guidance, data not provided due to fewer than ten completers or program is too new. 10

11 State Placements Advanced Diesel Technology Auto/Diesel Vehicle Technology Automotive Technology and Management Automotive Technology w/ Trim& Upholstery Technology Collision/Refinishing &Upholstery Technology Collision/Refinishing Technology and Management Diesel Technology and Management Diesel Technology w/ Trim &Upholstery Technology Diesel/Auto Vehicle Technology Motorsports Chassis Fabrication w/ Automotive Technology Motorsports Chassis Fabrication w/collision/refinishing Technology Motorsports Chassis Fabrication w/ Diesel Technology Street Rod & Custom Fabrication w/ Automotive Technology Street Rod & Custom Fabrication w/ Collision/Refinishing Technology Street Rod & Custom Fabrication w/ Diesel Technology Arkansas N/A N/A N/A N/A N/A N/A Georgia N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0 Illinois N/A N/A Indiana Commission on Proprietary Education 0 0 N/A 50 N/A Kansas N/A N/A Louisiana 50 N/A 0 N/A N/A N/A N/A N/A N/A N/A Minnesota N/A Mississippi 67 N/A N/A N/A N/A N/A N/A Missouri Board for Higher Education N/A N/A New Mexico 50 N/A 50 N/A N/A N/A 0 0 N/A 33 N/A Ohio State Board of Proprietary School Registration 0 N/A N/A N/A N/A N/A 0 N/A N/A N/A N/A 50 0 N/A 11

12 Advanced Diesel Technology Auto/Diesel Vehicle Technology Automotive Technology and Management Automotive Technology w/ Trim& Upholstery Technology Collision/Refinishing &Upholstery Technology Collision/Refinishing Technology and Management Diesel Technology and Management Diesel Technology w/ Trim &Upholstery Technology Diesel/Auto Vehicle Technology Motorsports Chassis Fabrication w/ Automotive Technology Motorsports Chassis Fabrication w/collision/refinishing Technology Motorsports Chassis Fabrication w/ Diesel Technology Street Rod & Custom Fabrication w/ Automotive Technology Street Rod & Custom Fabrication w/ Collision/Refinishing Technology Street Rod & Custom Fabrication w/ Diesel Technology Oregon Department of Education Private Vocational Schools N/A N/A N/A N/A N/A N/A 0 80 N/A 0 0 Tennessee Texas Workforce Commission West VirginiaCounci l for Community & Technical College Education N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Wisconsin N/A N/A 0 N/A Arkansas - Arkansas State Board of Private Career Education calculation for placement rate: number of graduates employed in a trained area divided by number of graduates. Time Frame: July 1, 2008 through June 30, Georgia - Georgia Nonpublic Postsecondary Education Commission calculation for placement rate: number of graduates placed divided by number of graduates. Time Frame: July 1, 2010 through June 30, Illinois - Illinois State Board of Education calculation for placement rate: number of graduates placed in their field divided by number of graduates less not available for placement. Time Frame: July 1, 2009 through June 30, Indiana Commission on Proprietary Education - Indiana Commission on Proprietary Education calculation for placement rate: number of graduates placed in related training divided by number of graduates. Time Frame Merrilville, Daytona: July 1, 2010 through June 30, 2011; Time Frame Laramie, Blairsville: January 1, 2010 to December 31, Kansas - Kansas Private Postsecondary and Out of State Education Annual Report: number of graduates placed in related field divided by the number of graduates less any students continuing education or military service. Time Frame: July 1, 2010 through June 30, Louisiana - Louisiana Board of Regents calculation for placement rate: total graduates placed divided by total graduates. Time Frame: July 1, 2010 through June 30,

13 Minnesota - Minnesota Higher Education Services Office calculation for placement rate: number of graduates employed in trained area divided by Number of graduates. Time Frame: July 1, 2010 through June 30, Mississippi - Mississippi State Board for Community & Community Colleges calculation for placement rate: number of graduate employed in their field of study within 6 months divided by number of graduates. Time Frame: January 1, 2010 through December 31, Missouri Board for Higher Education - Missouri Board for Higher Education calculation for placement rate: number of graduates employed in training related job divided by number of graduates. Time Frame: January 1, 2011 through December 31, 2011 New Mexico - New Mexico Commission of Higher Education calculation for placement rate: number of completers placed in employment appropriate divided by number of completers. Time Frame: July 1, 2009 through June 30, Ohio State Board of Proprietary School Registration - Ohio State Board of Proprietary School Registration calculation for placement rate: number of placed, divided by number of available placement. Time Frame: July 1, 2009, through June 30, Oregon Department of Education Private Vocational Schools - Oregon Department of Education Private Vocational Schools calculation for placement rate: number of graduates placed divided by number of graduates. Time Frame: July 1, 2010 through June 30, Tennessee - Tennessee Higher Education Commission calculation for placement rate: number placed in field divided by number of completed less special circumstances non-placement (health related, death, incarceration, full time military, job relocated or transferred, continuing education, pending fulfillment of licensure requirements, international students unable by law to work). Time Frame: July 1, 2010 through June 30, Texas Workforce Commission - Texas Workforce Commission calculation for placement rate: number of graduates placed divided by total graduates less exemptions (students continuing their education, in military service, incarcerated or deceased). Time Frame: September 1, 2010 through August 31, West Virginia Council for Community & Technical College Education - West Virginia Council for Community and Technical College Education calculation for placement rate: number of graduates that found employment in their area of training divided by number of graduates. Time Frame: July 1, 2009 through June 30, Wisconsin - Wisconsin Educational Approval Board calculation for placement rate: number of graduates employed divided by number of graduates. Time Frame: July 1, 2010 through June 30, This Institution Includes: WyoTech, Blairsville WyoTech, Laramie WyoTech, Sacramento ADDENDUM effective January 2, 2014: The following program has been added to the program offerings at the campus. This new program will not be available to students in various states until the respective state education departments grants approval. DIESEL ADVANCED TECHNOLOGY EDUCATION FOR MACK TRUCKS AND VOLVO TRUCKS Credential Clock Hours Credit Hours Program Length Program Tuition Diploma 1, months $29,250 The objective of this Diploma program is to provide the student with skills necessary to obtain a broad range of entry-level diesel technician positions. The student receives up-to-date training as a modern diesel technician plus specialty training for Mack Trucks and Volvo Trucks. The student will receive product specific training, theory, hands on repair and diagnosis of Mack Trucks and Volvo Trucks. Most employers will require drug testing and most will require a driving record that will allow the employee to obtain a Commercial Driver s License (CDL). Theory lectures and labs are used, and the program consists of approximately 43 theory and 57 lab. Additional Program Requirements: To be eligible for this program students are required to sustain the following: 1) 97 attendance or higher; 2) A 3.0 CGPA or higher; 3) Possession of a driver s license or the ability to obtain a driver s license. 4) Students must also be interviewed and recommended by the Director of Education (or designee) for continuation into the Diesel Advanced Technology Education I course. 13

14 If a student s performance within the Diesel Technology core courses falls below the above criteria, the student may choose to enroll or transfer into any other program currently offered at the campus. Should a student not meet or fail to sustain the aforementioned requirements, the Director of Education (or designee) will consider extenuating circumstances. MODULE ID AND TITLE LECTURE HOURS LAB HOURS TOTAL HOURS TOTAL WEEKS TOTAL CREDITS 600 Fluid Power and Electrical Systems Engines Engine Management Systems and Refrigeration Power Trains Diesel Technology Core Total DATE 4300 Diesel Advanced Technology Education for Mack Trucks and Volvo Trucks I DATE 4400 Diesel Advanced Technology Education for Mack Trucks and Volvo Trucks II Diesel Advanced Technology Education for Mack Trucks and Volvo Trucks Total Total Hours COURSE DESCRIPTIONS 600: Fluid Power and Electrical Systems 10.0 Semester Credit Hours Theory and lab in basic hydraulics, hydrostatic drive transmissions, use of freestanding engines and skid steer loaders, torque converters, Allison transmissions, basic DC electricity and electrical systems, repair and troubleshooting of hydraulic systems, pumps and cylinders, and mobile electrical systems. Reading of hydraulic and electrical diagrams. Use of flowmeters, pressure gauges, multimeters and starter/alternator/battery test equipment. Prerequisite: None. Lecture Hrs: Lab Hrs: Outside Hrs: : Engines 10.0 Semester Credit Hours Theory and lab practices in diesel engine rebuild, identification, manual usage, turbochargers, failure analysis, measuring, diagnostic troubleshooting, engine brakes and tune-up. The engines covered are Caterpillar, Detroit, and Cummins. The use of engine dynamometers to evaluate engine performance are also demonstrated. Prerequisite: None. Lecture Hrs: 92. Lab Hrs: 158. Outside Hrs: : Engine Management Systems and Refrigeration 10.0 Semester Credit Hours Theory in low and high-pressure pumps and injectors. Theory and lab in tanks, filters, transfer pumps, nozzles, and operation of fuel systems such as Caterpillar, Cummins, and Detroit Diesel. Practices include the use of diagnostic tools on electronic engines such as Caterpillar, Cummins, Detroit DDEC and V-Mac, EPA RCRA, Sec 608, 609. Also covered in this area are the operation testing and servicing of cab air conditioning and transport refrigeration, basic hand tools and fasteners. Prerequisite: None. Lecture Hrs: Lab Hrs: Outside Hrs: : Power Trains 10.0 Semester Credit Hours Theory in antilock brake systems. Theory and lab in operation, failure analysis, troubleshooting, repair and adjustments of the following components: manual transmissions, single reduction, through drive, and double reduction differentials, manual clutches and flywheels, 121 air brake systems, axle and driveline alignment, power take off units and wheel bearings. Prerequisite: None. Lecture Hrs: 117. Lab Hrs: 133. Outside Hrs: DATE 4300 Diesel Advanced Technology Education for Mack Trucks and Volvo Trucks I 10.0 Credit Hours This course introduces students to industry and OEM history, time management, warranty, safety, model identification, product specific truck theory, Volvo/Mack OEM program support tools and software, engine repair and diagnosis, fuel delivery, ignition, turbo, exhaust, engine management systems, drivability, electronics, overhaul, cooling, lubrication computer based diagnostics, and component locations. Prerequisite: Successful completion of two of the four Diesel Technology courses 600, 700, 800, 900. Lecture Hrs 99. Lab Hrs: 151. Outside Hrs: DATE 4400 Diesel Advanced Technology Education for Mack Trucks and Volvo Trucks II 10.0 Credit Hours This course introduces students to product specific truck theory, repair and diagnosis on emission systems operations, catalytic reduction converter, Diesel Particulate Filter, Preventive Maintenance Inspection, cab and chassis heating and air conditioning, airbags and driver safety, wiring harnesses, ergonomics, power trains to include transmission systems, clutches, brakes, ABS, Federal Brake Inspection, axles and differentials and suspensions and engine tune-up. Prerequisite: Successful completion of DATE Lecture Hrs 91. Lab Hrs: 159. Outside Hrs:

15 ADDENDUM effective November 13, 2013: The following cancellation and refund policy replaces the respective MINNESOTA STUDENT INFORMATION found on page 23 of the school catalog. MINNESOTA STUDENT INFORMATION BUYER S RIGHT TO CANCEL: All notices of cancellation should be in writing, signed and dated, and mailed or delivered to the Admissions Office located at your campus. Written notice of cancellation shall take place on the date the letter of cancellation is postmarked or, in the case where the notice is hand carried, it shall occur on the date the notice is delivered to the school. The date of execution of this enrollment agreement shall be presumed to be the date of delivery of the notice of acceptance, and if delivered by mail, the postmarked date of the letter of acceptance from the school. All notices of cancellation shall be acknowledged in writing within 10 business days of receipt of such notice and all refunds shall be forwarded to the student within 30 business days of receipt of such notice. Notification of a student s cancellation will be made within 30 days to any agency known to the school to be providing financial aid. Minnesota students will be notified of acceptance or rejection in writing. In the event a student is rejected, all tuition, fees and other charges will be refunded. In addition to 7. CANCELLATION POLICY (a) (2) and (3), at the top of page 2 of 4, and notwithstanding anything to the contrary, if a Minnesota student gives written notice of cancellation within five business days of the execution of this contract or day on which the student is accepted, then a complete refund is given regardless of whether the program has started. If a Minnesota student gives written notice of cancellation after five business days of the execution of this contract or day on which the student is accepted, but before the start of the program by the school, then all tuition, fees and other charges, except 15 percent of the total cost of the program (15 percent not to exceed $50.00) shall be refunded to the student. If a Minnesota student gives written notice of cancellation after the start of the period of instruction for which the student has been charged, but before completion of 75 percent of the period of instruction, then student is assessed a pro rata portion of tuition, fees and all other charges based on the number of days in the term, plus 25 percent of the total program cost (25 percent not to exceed $.00). This refund policy is not linked to the school s student conduct code. It is not the practice of the school to transfer or sell promissory instruments; however, promissory instruments will not be negotiated prior to completion of 50 of the course of instruction. ADDENDUM effective November 13, 2013: The following refund policies are added to the CANCELLATION AND REFUND POLICIES beginning on page 22 of the school catalog. MISSISSIPPI STUDENT INFORMATION A student who withdraws after five business days of scheduled class attendance of the first period of enrollment will receive a refund in accordance with the following Mississippi Refund Policy: Time Attended Percent of Refund After first week; up to After 10; up to More than 25; up to More than 50 0 The percent of time attended is based on the number of days of attendance compared to the number of days in the period of enrollment. A student who withdraws during a subsequent period of enrollment will receive a refund applicable to the subsequent period of enrollment in accordance with the following schedule: Time Attended Percent of Refund After first week; up to After 10; up to More than 25; up to More than 50 0 NEW JERSEY STUDENT INFORMATION A student who withdraws after five business days of scheduled class attendance of the first period of enrollment will receive a refund in accordance with the following New Jersey Refund Policy: Time Attended Percent of Refund Within first week 90 After first week; through the third week 80 After third week; up to More than 25; up to More than 50 0 The percent of time attended is based on the number of days of attendance compared to the number of days in the period of enrollment. A student who withdraws during a subsequent period of enrollment will receive a refund applicable to the subsequent period of enrollment in accordance with the following schedule: 15

16 Time Attended Percent of Refund Within first week 90 After first week; through the third week 80 After third week; up to More than 25; up to More than 50 0 ADDENDUM effective November 13, 2013: The following approval is removed from the Entitlement Agencies listing on page 2 of the school catalog. Approved by the Illinois Board of Higher Education ADDENDUM effective October 11, 2013: The following program disclosures (last published February 15, 2013) have been updated in the catalog. The change includes updated on-time completion rates. The following program disclosures are provided pursuant to federal law. "Occupation" data reflects the type of occupations the program generally prepares students to enter. (For government data regarding occupations, please navigate to To the extent permitted under the standards of the applicable accrediting agency or state agency, the placement rates reported below may reflect students who completed the program and obtained employment in one of the occupations listed in the standard occupational titles below or other occupations that utilize the core skills taught in the program. "On-Time Completion Rate" reflects the percent of graduates between July 1, 2012, and June 30, 2013, who completed their program within percent of the normal time frame as described in the school catalog or enrollment agreement. "Costs to Students" reflects the costs of the academic program for students completing the program on time, including tuition and fees, estimated books and supplies, and if applicable, room and board. Costs do not reflect potential increases and are current as of the publication date of this disclosure. "Placement Rates" reflects the percent of graduates securing employment as calculated pursuant to the required calculation methodologies and time frames of the applicable state agencies, institutional accrediting agencies or programmatic accrediting agencies. Each agency has different criteria in determining what constitutes a placement, and these placements may or may not be listed in the standard occupations listed below. (For more information about calculations and time frames, refer to the descriptions at the end of this disclosure.) "Median Loan Debt" reflects the median loan debt incurred by students who completed the program, between July 1, 2011, and June 30, 2012, including Title IV program loans, private educational loans and institutional financing plans. Unless otherwise noted below, the data included in this disclosure are for the entire educational institution as defined by the Department of Education, which may include a number of individual campus locations (even in different states) and both online and physical delivery modalities. See footnotes for a list of the campuses included in the institution. In many cases, the on-time completion rate, the cost to students, the placement rate and the median loan debt may differ (often significantly) between these physical locations and delivery modalities. The data below reflect averages for all students in all locations and delivery modalities (or, in the case of program cost, the ranges of program costs) across all locations and delivery modalities. Advanced Diesel Technology (Diploma) Occupation(Title, SOC Code) Bus & Truck Mechanics & Diesel Engine Specialists Institutions Tuition and Fees $29,250 16

17 Advanced Diesel Technology (Diploma) On-Time Completion Rate Institutions Institutional Accreditor 81 Laramie Campus Institutional Accreditor 81 Median Loan Debt Title IV Program Loans $11,461 Auto/Diesel Vehicle Technology (Diploma) Occupation(Title, SOC Code) Bus and Truck Mechanics and Diesel Engine Specialists Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 75 to State 71 Laramie Campus Institutional Accreditor Median Loan Debt Title IV Program Loans $11,544 Automotive Technology and Management (Associate) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Institutions Tuition and Fees $29,250 to $29,323 17

18 Auto/Diesel Vehicle Technology (Diploma) On-Time Completion Rate Institutions Institutional Accreditor 70 to 87 State 67 to 79 Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans $14,680 Automotive Technology w/ Trim & Upholstery Technology (Diploma) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 71 State 68 to 80 Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans $11,544 Collision/Refinishing & Upholstery Technology (Diploma) Occupation(Title, SOC Code) Automotive Body and Related Repairers

19 Collision/Refinishing & Upholstery Technology (Diploma) Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 50 to 72 State 68 Laramie Campus Institutional Accreditor 50 Median Loan Debt Title IV Program Loans $9,597 Collision/Refinishing Technology and Management (Associate) Occupation(Title, SOC Code) Automotive Body and Related Repairers Painters, Transportation Equipment Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 79 to 83 State 72 Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans $14,682 19

20 Collision/Refinishing Technology and Management (Associate) Diesel Technology and Management (Associate) Occupation(Title, SOC Code) Bus and Truck Mechanics and Diesel Engine Specialists Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 73 State 77 Laramie Campus Institutional Accreditor N/A Median Loan Debt Title IV Program Loans $14,680 Diesel Technology w/ Trim & Upholstery Technology (Diploma) Occupation(Title, SOC Code) Bus and Truck Mechanics and Diesel Engine Specialists Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 0 State 33 Laramie Campus Institutional Accreditor N/A 20

21 Diesel Technology w/ Trim & Upholstery Technology (Diploma) Median Loan Debt Title IV Program Loans $11,461 Diesel/Auto Vehicle Technology (Diploma) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 75 to 94 State 88 Laramie Campus Institutional Accreditor 75 Median Loan Debt Title IV Program Loans $11,461 Motorsports Chassis Fabrication w/ Automotive Technology (Diploma) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate

22 Motorsports Chassis Fabrication w/ Automotive Technology (Diploma) Institutions Institutional Accreditor 80 to 81 State 69 to 80 Laramie Campus Institutional Accreditor 81 Median Loan Debt Title IV Program Loans $9,597 Motorsports Chassis Fabrication w/ Collision/Refinishing Technology (Diploma) Occupation(Title, SOC Code) Automotive Body and Related Repairers Painters, Transportation Equipment Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 75 to 83 State 80 Laramie Campus Institutional Accreditor 75 Median Loan Debt Title IV Program Loans $9,597 Motorsports Chassis Fabrication w/ Diesel Technology (Diploma) Occupation(Title, SOC Code) Bus & Truck Mechanics & Diesel Engine Specialists Institutions Tuition and Fees $29,250 22

23 Motorsports Chassis Fabrication w/ Diesel Technology (Diploma) On-Time Completion Rate Institutions Institutional Accreditor 80 to 83 State 78 Laramie Campus Institutional Accreditor 83 Median Loan Debt Title IV Program Loans $9,597 Street Rod & Custom Fabrication w/ Automotive Technology (Diploma) Occupation(Title, SOC Code) Automotive Service Technicians and Mechanics Electronic Equipment Installers and Repairers, Motor Vehicles Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 77 to State 71 to 74 Laramie Campus Institutional Accreditor Median Loan Debt Title IV Program Loans $11,544 Street Rod & Custom Fabrication w/ Collision/Refinishing Technology (Diploma) Occupation(Title, SOC Code) Automotive Body and Related Repairers Painters, Transportation Equipment

24 Street Rod & Custom Fabrication w/ Automotive Technology (Diploma) Institutions Tuition and Fees $29,250 to $29,323 On-Time Completion Rate Institutions Institutional Accreditor 84 State 82 Laramie Campus Institutional Accreditor 84 Median Loan Debt Title IV Program Loans $9,597 Street Rod & Custom Fabrication w/ Diesel Technology (Diploma) Occupation(Title, SOC Code) Bus & Truck Mechanics & Diesel Engine Specialists Institutions Tuition and Fees $29,250 On-Time Completion Rate Institutions Institutional Accreditor 50 to State 61 Laramie Campus Institutional Accreditor 50 Median Loan Debt Title IV Program Loans $11,461 24

25 Street Rod & Custom Fabrication w/ Diesel Technology (Diploma) Footnotes: Institutional Accreditor - ACCSC outcomes are calculated by program length, tracking start cohorts from their start date through graduation. Employment is calculated by taking the total graduates placed in field divided by the total number of graduates minus graduates waived for employment because of continuing education, military, health, incarceration, foreign students or death. Time Frame - To determine the cohort date range, the ACCSC calculation counts backwards from the report date as follows: program length times 1.5 plus 3 months for placement activity. State - California Bureau for Private Postsecondary Education (BPPE) calculation for placement rate: number of graduates employed in the field divided by the number of graduates available for employment for each program that is either (1) designed, or advertised, to lead to a particular career, or (2) advertised or promoted with any claim regarding job placement. Time Frame: January 1, 2012 through December 31, State - Pennsylvania Department of Higher Education calculation for placement rate: number of graduates employed in related field divided by total graduates minus continued post secondary education and entered military. Time Frame: July 1, 2010 through June 30, Placement Rate N/A - There is no data to disclose because this program is too new or is not required to be calculated. State Placements Advanced Diesel Technology Auto/Diesel Vehicle Technology Automotive Technology and Management Automotive Technology w/ Trim& Upholstery Technology Collision/Refinishing &Upholstery Technology Collision/Refinishing Technology and Management Diesel Technology and Management Diesel Technology w/ Trim &Upholstery Technology Diesel/Auto Vehicle Technology Motorsports Chassis Fabrication w/ Automotive Technology Motorsports Chassis Fabrication w/collision/refinishing Technology Motorsports Chassis Fabrication w/ Diesel Technology Street Rod & Custom Fabrication w/ Automotive Technology Street Rod & Custom Fabrication w/ Collision/Refinishing Technology Street Rod & Custom Fabrication w/ Diesel Technology Arkansas N/A N/A N/A N/A N/A N/A Georgia N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0 Illinois N/A N/A Indiana Commission on Proprietary Education 0 0 N/A 50 N/A 25

26 Advanced Diesel Technology Auto/Diesel Vehicle Technology Automotive Technology and Management Automotive Technology w/ Trim& Upholstery Technology Collision/Refinishing &Upholstery Technology Collision/Refinishing Technology and Management Diesel Technology and Management Diesel Technology w/ Trim &Upholstery Technology Diesel/Auto Vehicle Technology Motorsports Chassis Fabrication w/ Automotive Technology Motorsports Chassis Fabrication w/collision/refinishing Technology Motorsports Chassis Fabrication w/ Diesel Technology Street Rod & Custom Fabrication w/ Automotive Technology Street Rod & Custom Fabrication w/ Collision/Refinishing Technology Street Rod & Custom Fabrication w/ Diesel Technology Kansas N/A N/A Louisiana 50 N/A 0 N/A N/A N/A N/A N/A N/A N/A Minnesota N/A Mississippi 67 N/A N/A N/A N/A N/A N/A Missouri Board for Higher Education N/A N/A New Mexico 50 N/A 50 N/A N/A N/A 0 0 N/A 33 N/A Ohio State Board of Proprietary School Registration Oregon Department of Education Private Vocational Schools 0 N/A N/A N/A N/A N/A 0 N/A N/A N/A N/A 50 0 N/A N/A N/A N/A N/A N/A N/A 0 80 N/A 0 0 Tennessee Texas Workforce Commission

27 Advanced Diesel Technology Auto/Diesel Vehicle Technology Automotive Technology and Management Automotive Technology w/ Trim& Upholstery Technology Collision/Refinishing &Upholstery Technology Collision/Refinishing Technology and Management Diesel Technology and Management Diesel Technology w/ Trim &Upholstery Technology Diesel/Auto Vehicle Technology Motorsports Chassis Fabrication w/ Automotive Technology Motorsports Chassis Fabrication w/collision/refinishing Technology Motorsports Chassis Fabrication w/ Diesel Technology Street Rod & Custom Fabrication w/ Automotive Technology Street Rod & Custom Fabrication w/ Collision/Refinishing Technology Street Rod & Custom Fabrication w/ Diesel Technology West Virginia Council for Community & Technical College Education N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Wisconsin N/A N/A 0 N/A Arkansas - Arkansas State Board of Private Career Education calculation for placement rate: number of graduates employed in a trained area divided by number of graduates. Time Frame: July 1, 2011 through June 30, Georgia - Georgia Nonpublic Postsecondary Education Commission calculation for placement rate: number of graduates placed divided by number of graduates. Time Frame: July 1, 2010 through June 30, Illinois - Illinois State Board of Education calculation for placement rate: number of graduates placed in their field divided by number of graduates less not available for placement. Time Frame: July 1, 2009 through June 30, Indiana Commission on Proprietary Education - Indiana Commission on Proprietary Education calculation for placement rate: number of graduates placed in related training divided by number of graduates. Time Frame Merrilville, Daytona: July 1, 2010 through June 30, 2011; Time Frame Laramie, Blairsville: January 1, 2010 to December 31, Kansas - Kansas Private Postsecondary and Out of State Education Annual Report: number of graduates placed in related field divided by the number of graduates less any students continuing education or military service. Time Frame: July 1, 2010 through June 30, Louisiana - Louisiana Board of Regents calculation for placement rate: total graduates placed divided by total graduates. Time Frame: July 1, 2010 through June 30, Minnesota - Minnesota Higher Education Services Office calculation for placement rate: number of graduates employed in trained area divided by Number of graduates. Time Frame: July 1, 2011 through June 30, Mississippi - Mississippi State Board for Community & Community Colleges calculation for placement rate: number of graduate employed in their field of study within 6 months divided by number of graduates. Time Frame: January 1, 2010 through December 31,

28 Missouri Board for Higher Education - Missouri Board for Higher Education calculation for placement rate: number of graduates employed in training related job divided by number of graduates. Time Frame: January 1, 2011 through December 31, 2011 New Mexico - New Mexico Commission of Higher Education calculation for placement rate: number of completers placed in employment appropriate divided by number of completers. Time Frame: July 1, 2009 through June 30, Ohio State Board of Proprietary School Registration - Ohio State Board of Proprietary School Registration calculation for placement rate: number of placed, divided by number of available placement. Time Frame: July 1, 2009, through June 30, Oregon Department of Education Private Vocational Schools - Oregon Department of Education Private Vocational Schools calculation for placement rate: number of graduates placed divided by number of graduates. Time Frame: July 1, 2010 through June 30, Tennessee - Tennessee Higher Education Commission calculation for placement rate: number placed in field divided by number of completed less special circumstances non-placement (health related, death, incarceration, full time military, job relocated or transferred, continuing education, pending fulfillment of licensure requirements, international students unable by law to work). Time Frame: July 1, 2011 through June 30, Texas Workforce Commission - Texas Workforce Commission calculation for placement rate: number of graduates placed divided by total graduates less exemptions (students continuing their education, in military service, incarcerated or deceased). Time Frame: September 1, 2010 through August 31, West Virginia Council for Community & Technical College Education - West Virginia Council for Community and Technical College Education calculation for placement rate: number of graduates that found employment in their area of training divided by number of graduates. Time Frame: July 1, 2009 through June 30, Wisconsin - Wisconsin Educational Approval Board calculation for placement rate: number of graduates employed divided by number of graduates. Time Frame: July 1, 2010 through June 30, This Institution Includes: WyoTech, Sacramento WyoTech, Blairsville WyoTech, Laramie ADDENDUM, Effective September 16, 2013: The following statement has been added to the Licensure, Approvals and Certifications section on page 2 of the catalog. All Automotive and Collision programs are programmatically accredited by the National Automotive Technician Education Foundation (NATEF). ADDENDUM Effective September 1, 2013: The following modifications have been made: TUITION CHARGES FOR RE-ENTRY Students re-entering within 180 days: Same Program (Same/New Program Version): Will be charged tuition at the original tuition rate reflected on the original enrollment agreement less the amount charged on the prior period of enrollment (Charges plus or minus any tuition adjustments). Same Program (New Program Version of Different Credits/Length of Program): Will be charged tuition at the current catalog rate for the program of enrollment less the amount charged on the prior period of enrollment (Charges plus or minus any tuition adjustments). Different / New Program (Program Change) Will be charged tuition at the current catalog rate for the program of enrollment. A tuition credit will be determined for the student s prior period of enrollment. Students re-entering greater than 180 days less than 365 days: Same Program (Same/New Program Version) Will be charged tuition at the current catalog rate for the program of enrollment less the amount charged on the prior period of enrollment (Charges plus or minus any tuition adjustments). 28

29 Same Program (New Program Version of Different Credits/Length of Program) Will be charged tuition at the current catalog rate for the program of enrollment less the tuition credit from the prior period of enrollment. Determine which re-entry credit for the prior period of enrollment is in the student s best interest by referring to the Enrollment Agreement Guidelines. Different / New Program (Program Change) Will be charged tuition at the current catalog rate for the program of enrollment. A tuition credit will be determined for the student s prior period of enrollment. Return from LOA A student must return from a LOA on the first day of any appropriate module or prior to the expiration of his or her leave. A student who goes on leave prior to the end of a module shall receive a grade of L (leave) which shall remain on his or her transcript until the student returns from an LOA, retakes the entire module and earns a grade. The module with a grade of L shall not be included in the calculation of Rate of Progress (ROP), Maximum Time Frame (MTF) or attendance. Grading Scale Percentage Letter GPA -90 A B C F 0 L Leave of Absence PE Pass by Proficiency Exam W Withdrawal WZ Military Withdrawal TR Transfer Credit Failure to Return from LOA The L grade in the LOA beginning module shall be changed to W (withdraw). The module with a grade of W shall be included as an attempt in the calculation of Rate of Progress and Maximum Time Frame. Coursework Completed at Foreign Institutions All coursework completed at a foreign institution must be evaluated by a member of the National Association of Credential Evaluation Services (NACES) or a member of the Association of International Credentials Evaluators (AICE). The evaluation must be course by course with letter grades. An exception to this may be allowed for students transferring from Canada with prior approval from the Transfer Center. Satisfactory Academic Process FA Probation (SAP NOT MET 2 nd consecutive term) At the end of each term following a SAP evaluation, students with an immediate SAP NOT MET status and who are SAP NOT MET again according to the academic progress standards stated in the school s catalog, will be notified with a SAP NOT MET letter indicating that they will be withdrawn unless they successfully appeal by written request within five (5) calendar days after the notification in accordance with the Academic Appeals Policy. Appeals shall only be granted for the following reasons: the death of a family member; an illness or injury suffered by the student; special circumstances of an unusual nature which are not likely to recur. (See ED002 Academic Appeals Policy.) Academic Progress Plan (APP) Students on FA Probation must agree to the requirements of an Academic Progress Plan (APP) as a condition of their FA probation. Each student shall receive a copy of his or her APP. A copy of each student s APP shall be kept in the student s permanent academic file. The APP may extend over one (1) or multiple terms, as defined at the initiation of the APP. At the end of the first evaluation period on the APP, the student will meet with the Academic Dean/Director of Education (or designee)/online Designee for an evaluation of progress of the plan s requirements. If on a single-term plan and the student has met the requirement(s) of the plan, the student must be in SAP Advising or SAP Met status, and the student s APP shall be considered fulfilled and closed. If on a multi-term plan and the student has met the requirement(s) of the first evaluation period, then new requirement will be set and the student will be placed manually into SAP Meeting APP Status and will adhere to the subsequent term requirements of the APP. 29