ALAMO SURETY BONDS CONTRACT SURETY BONDS BID * PAYMENT * PERFORMANCE



Similar documents
Surety bonds are almost always written by insurance companies that are licensed by state insurance departments, but they are not like typical

Bonding for Contractors. Barrie Construction Association September 17, 2015

U.S. Small Business Administration Surety Bond Guarantee Program. Opening the Door to Bonding

The Mysterious World of Surety Bonding

Construction Surety Bonds

Surety 101. An Introduction to the Surety Industry

Surety Bond Guarantee Program

Surety Bond Associates. Understanding Contract Surety Bonding: An Orientation for Veteran Owned Small Contractors

INSTRUCTIONS AND APPLICATION FOR CONTRACT BONDING

Performance, Payment and Contract Bonds The Fastest Bond Program up to $500,000

Construction Surety Bonding:

How to Obtain. Surety Bonds

CONTRACT BOND SUBMISSION

Performance and Payment Bonds

APPLYING FOR A BOND FACILITY. The Contractor Application Process

SUBCONTRACTOR LABOR AND MATERIAL PAYMENT BOND ("Bond") SURETY Address

TWELFTH ANNUAL SOUTHERN SURETY AND FIDELITY CLAIMS CONFERENCE

INTRODUCTION TO BID/PERFORMANCE AND PAYMENT BONDS AND THE SBA BOND GUARANTEE PROGRAM:

What You Should Know About General Agreements of Indemnity and Why You Should Know It

CALIFORNIA CONSTRUCTION CONTRACTS, DEFECTS, AND LITIGATION (1st Edition) November 2015 TABLE OF CONTENTS

MITIGATE RISKS AND MAXIMIZE RESOURCES WITH SUBCONTRACTOR PREQUALIFICATION

Upon receipt of a letter of intent to award a contract, Bidder shall provide Performance and Payment Bonds as outlined below.

ACCOUNTING PROCEDURES IN DETERMINATION OF CONTRACTOR S FINANCIAL RESOURCES BULLETIN NO. 2

PURPOSE AND TYPES OF SURETY BONDS

Understanding and Maximizing Surety Credit and Bonding Capacity

DELMARVA SURETY FAX (410) Surety Bond Specialists

Construction Bonds. Vanessa S. Werden

Surety Bond Tutorial by Lori Kieswetter

NIGP Career Seminar Series II Workshop I Bonds (Bid, Performance, and Payment) Bond Excerpts from ARS Title 34

Contract Financing for the Contractor

Subguard Default Insurance vs. Traditional Performance and Payment Bonds for Subcontractors.

G CHAPTER 8. EMPLOYEE DISHONESTY INSURANCE EXPLANATION AND REQUIREMENTS

SUBCONTRACTOR S QUALIFICATION STATEMENT. Give complete answers to the following questions (attach additional pages if necessary).

Performance Bond. as Principal, (Legal title of the Contractor) (Street, City, State, Zip Code) and as Surety, (Legal title of the Surety)

AN OVERVIEW OF THE CONTRACT SURETY BOND CLAIMS PROCESS

PERSONAL FINANCIAL STATEMENT

Request For Proposal. Furnish Schneider Business Park Signs Design Build Services. For the Cibolo Economic Development Corporation Cibolo, Texas

Auditor General Procurement Processes Review - Bid Bonds/Performance Bonds

Q: Will I have to pay federal taxes on the money my lender loses in the short sale?

Construction Insurance and Contract Bonds. Ted Murray CMW Insurance Services Ltd.

COMMERCIAL BOND APPLICATION

The Surety Safeguard for Third Party Vendor Contracts. How Surety Bonds Protect Taxpayer Dollars

Surety Bonding Solutions for Risk Management GFOABC May 31, 2012, Kelowna

Order Authorizing Securitization of Certain Additional Transition Costs and Related Transactions

SUBCONTRACTOR PRE-QUALIFICATION APPLICATION

BID BOND CITY OF EAST POINT, GEORGIA

MANUAL COMPLETION INSTRUCTIONS

BDH ASSOCIATES, INC Lawrenceville Hwy., Suite 201 Lilburn, GA (770) or Toll Free (888) Fax:

Bonding and Insurance Requirements. Economic Development Committee 04/7/08

DCU BULLETIN Division of Credit Unions Washington State Department of Financial Institutions Phone: (360) FAX: (360)

Important. Commercial Surety Application All Purpose

PERFORMANCE BOND. Surety Bond No. STATE OF TEXAS KNOW ALL MEN BY THESE PRESENTS: COUNTY OF

KNOW ALL MEN BY THESE PRESENTS, that we, the undersigned,

TEXAS DEPARTMENT OF HOUSING AND COMMUNITY AFFAIRS

How To Understand Surety Bond

How To Get A Construction Contract In The United States

1. Responsibility: 2. Lost Card Notification: 3. Liability for Unauthorized Use: 4a. Credit Line:

FIRM APPROVAL OF BIDDER'S PROOF OF RESPONSIBILITY DATE RECEIVED PRE-QUALIFIED BY DATE CLASS OF WORK DESCRIPTION OF JOB LOCATION OF JOB DEPARTMENT

How To Get A Job Done

A Primer on Surety Bonds

REQUEST FOR PROPOSAL FOR CONSTRUCTION MANAGEMENT SERVICES. Part I: Proposal Information

FIGURE 20 BOND FORMS

PAYMENT/PERFORMANCE BOND. This is the front page of the payment/performance bond issued in compliance with Florida Statutes

Transcription:

ALAMO SURETY BONDS CONTRACT SURETY BONDS BID * PAYMENT * PERFORMANCE 2361 Austin Hwy San Antonio, TX 78218 Phone (210) 930-5550 Fax (210) 930-3255 www.alamobonds.com 1

1. WHAT IS A SURETY BOND? FREQUENTLY ASKED BOND QUESTIONS Surety Bonds are formal contracts that bind the principal (contractor), the project owner or prime contractor (obligee), and the bond company (surety). The principal has the obligation to complete the project as per the contract, the obligee has the duty to pay the principal for work performed, and the surety is obligated to pay the obligee in the event the principal defaults. 2. WHAT IS THE DIFFERENCE BETWEEN INSURANCE AND BONDING? Insurance policies reimburse the insured (contractor) for accidents covered under the policy. Bonds guarantee the principal (contractor) performs a specific project according to the contract specifications (the performance bond) and pays for the subcontracting work, labor and materials furnished on the job (the payment bond). Insurance protects the contractor, while bonds protect the owner or obligee. 3. WHY DOES THE SURETY NEED MY FINANCIAL STATEMENTS? The surety qualifies the contractor by analyzing their financial position and capacity to perform construction projects. The only meaningful method to evaluate a contractor s financial condition is by examining their financial statements. 4. WHAT IS THE GENERAL INDEMNITY AGREEMENT? The surety will only approve contractors that it believes will not cause bond claims. As a result, the surety charges only a nominal premium for its services. In exchange, the surety requires the contractor to sign the general indemnity agreement (GIA), in which the contractor agrees to repay the surety in the event of a bond claim. 5. WHY DOES THE SURETY REQUIRE MY SPOUSE TO SIGN THE GIA? HE/SHE DOES NOT OWN OR PARTICIPATE IN MY BUSINESS. Since Texas is a community property state, assets are generally owned equally between married parties. In recent years, divorce rates have been relatively high. As a safeguard against the resulting negative financial impact on both parties, the surety seldom waives the spouse s indemnity. 6. WHY DO I NEED A BANK LINE OF CREDIT? The surety feels more comfortable when the contractor has a line of credit available, even if the contractor seldom uses it. In a perfect world, the contractor would never need a line of credit. In the real world, however, contractors encounter unforeseen problems that can restrict their cash flow. The bank line serves as a financial cushion until the problem is resolved. 2

7. WHY MUST I MAKE A COMPLETE SUBMISSION FOR A SMALL BID BOND? The bid bond is more than a security required of bidders on government projects. It guarantees the successful bidder will enter into the contract and provide the payment and performance bonds. The surety is unwilling to throw caution to the wind in hopes the contractor will not be the successful bidder. Instead, the surety assumes the contractor will be the successful bidder, and therefore, requires a complete underwriting submission. 8. HOW DO I KNOW WHEN BONDS WILL BE REQUIRED? Contracts with the State of Texas between $25,000 and $100,000 require payment bonds. Contracts of $100,000 and over require both payment & performance bonds. Since these bonds are required by law, bid solicitations do not always contain information about the bond requirements. The assumption is that contractors should know the law. If unsure, you should contact the contracting officer to get more information about the bonding requirement for two reasons: 1) to qualify for bonding if you haven t already done so, and 2) to include the bond cost in your final bid price. 9. WHAT IS A COLLATERALIZED BOND? Sometimes, the surety feels the contractor can do the work, but is not completely satisfied that the contractor is financially sound enough to avoid payment bond claims. In this case, the contractor provides the surety with a collateral deposit (usually in the form of cash, CD assignment, or Letter of Credit) which is returned to the contractor (usually 90 days after the job is complete) if there are no claims. 10. WHAT IS FUNDS CONTROL ADMINISTRATION? For most small and emerging contractors, the successful management of contract proceeds is a major challenge. Most surety losses stem from payment claims. Under funds control, the surety and contractor agree to allow a third party (the funds control administrator) to manage the contract funds from the bonded job for a fee. Utilizing funds control, the surety can greatly mitigate its loss in the event its contractor encounters financial difficulties. 11. HOW LONG DOES IT TAKE TO GET APPROVED FOR THE FIRST TIME? For small bonds (under $500,000) it usually takes no more than 2 3 working days on a new account. Larger bonds can take up to 3-5 working days. 3

HOW DO CONTRACTORS SUCCEED? 1. ADEQUATE WORKING CAPITAL The contractor s ability to perform all the work in its current backlog without encountering financial difficulties. As measured by surety companies, it is current assets less current liabilities. This is important because the surety will determine the contractor s bonding capacity based on its working capital position. 2. GOOD ACCOUNTING SYSTEM Contractors with good internal bookkeeping systems and financial statements prepared by independent CPA s are better equipped to estimate and manage job costs and turn a profit. 3. BANK CREDIT The ability to maintain a bank line of credit can make or break a contractor when faced with unforeseen problems on a job. With an available line of credit, the contractor can maintain positive cash flow and finish the work without adversely affecting the remaining work on hand. 4. WELL MAINTAINED EQUIPMENT It is far more cost effective in the long run to keep equipment in good repair. Equipment failure can be catastrophic to a contractor. 5. QUALITY OF WORK While a contractor must perform quality work, this aspect alone does not ensure success. 4

HOW TO OBTAIN BONDS 1. CREDIT REPORTS In a hard market, credit reports are a quick and easy way for underwriters to perform the initial screening of applicants. Good credit is more important than ever in obtaining bonds at reasonable rates and terms. Severe credit problems such as bankruptcies, tax liens, and judgments, should be satisfied before making a submission. 2. FINANCIAL STATEMENTS VS TAX RETURNS Financial information is of little value to the surety unless it can be analyzed. Tax returns and cash basis financial statements do not provide enough information to make effective decisions. Financial statements should be prepared, at a minimal, on an accrual basis and should include a balance sheet and income statement. For larger projects, financial statements should be prepared by a CPA using the percentage-of- completion method of accounting. 3. BANK LINE OF CREDIT Expect the best, plan for the worst. Establishing a line of credit can greatly enhance your working capital position. It also shows the underwriter that the contractor is prepared for contingencies. 4. EXPERIENCE The owner and key personnel should have extensive experience performing the type of work they are asking the surety to bond. Even if the experience is primarily working for other contractors, the underwriter will feel better about the contractor s ability to perform. 5. REASONABLE EXPECTATIONS Walk before you run... Requesting a bond for a project several times larger than any past job completed is unrealistic. The number one cause for contractor failure is growing faster than resources allow. Contractors should start small and gradually work their way up to larger projects. Do what you know... Taking on work outside your normal area of expertise can be disastrous. The surety seldom wants to pay for the contractor s learning experience. Stay on your own turf... Doing work long distances from your home base can create all sorts of problems including weather, local politics, soil composition, and logistical issues. Generally, the surety is skeptical that a long-distance job will be profitable. Give them enough time... Don t wait until the day before the bid to submit your bond application. For a new account bidding a small job ($500,000 or under), the fastest sureties take 2 or 3 days to get an answer. Some bond underwriters take even longer. Don t miss bid opportunities due to lack of planning. Sources of the above information include the Surety Information Office and the Surety Association of America. 5