Material Handling Products

Material Handling Products

The Campbell Chain story Campbell can trace its beginnings back to 84, when one of the many companies that eventually became what is today the Campbell brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop-forged chain hardware, high quality tackle blocks, shackles, hooks, and much more. Today, Campbell is the best-selling brand of welded and weldless chain in the United States. Users can select from a wide range of working load capacities, including proof coil, high test, transport, and alloy. Many finishes, styles, and materials are also available. Campbell chains and assemblies, including slings for overhead lifting, tie-downs, and binder chains, have earned the brand an outstanding reputation for quality. Innovation is also a key element of the Campbell philosophy. Grade 00 chain was pioneered and developed by Campbell, resulting in products that featured 2% higher working load limits, manufactured proof tests, and design strengths than Grade 80 chain products. This kind of innovation, combined with unparalleled technical support, expertise, and training, provides Campbell customers with a level of satisfaction unrivaled in the industry. www.apexhandtools.com/campbell

chain products Campbell Chain Chain Founded in 99, Campbell is the largest manufacturer of welded and weldless chain in the United States. Users of Campbell chain can select from a wide range of working load capacities including proof coil, high test, transport and alloy; finishes including self-colored, Blu-Krome, galvanized and bright color polycoated; links that are short, long, twisted, locked, looped, even stamped from flat stock. Several chain types are even available in solid brass and bronze. Campbell chains and assemblies, including slings for overhead lifting, and binder chains, have earned for the manufacturer an outstanding reputation for quality. The Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 900. Contents Page Cable 6-7, 9, 4 Camtrol comparison system Chain, aluminum 7 Chain, animal 4-42 Chain, ball 4 - Chain, BBB 9 Chain, binder 8-9 Chain, cam-alloy 6 Chain, cathedral Chain, clock 4 Chain, coil 20-2, 44-4 Chain, construction 8 Chain, decorator 2 - Chain, dock fender Chain, fishing Chain, high test 0- Chain, hobby/craft 2-4 Chain, jack 29-0, 46 Chain, log 9 Chain, loop 2, 27-28, 4 Chain, machine 8-20, 44 Chain, marine 8, 2 Chain, marine alloy 2 Chain, mooring 9 Chain, oval link Chain, passing link 2-24, 46 Chain, plastic - 6 Chain, plumber s 26 Chain, porch swing 4 Chain, proof coil 6-8 Chain, sash 0 -, 46 Chain, stainless steel 7 Para Chain, prevenir sweep la posibilidad de una lesión personal sería: Chain, NO EXCEDA studio los límites de carga de las cadenas o componentes. 22 NO LA UTILICE para cargar hacia arriba o para izar. Chain, NO LA tow UTILICE si la cadena o los componentes están visualmente 40 distorsionados Chain, transport o gastados. - 4 Contents Page Chain, tuna 4 Chain, twist Chain, utility 24 Chain, well 29 Chain, winch line 40 Cutters, chain and cable 4 Leads, anchor 8 Sizing chart 44-46 Campbell chain numerical index 47-48 DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 2

chain products www.apexhandtools.com/campbell Camtrol System Campbell s CAMTROL SYSTEM makes chain products easier to identify and understand. That s because all are based on engineering formulas computed according to ISO (International Organization for Standardization), NACM (National Association of Chain Manufacturers) and ASTM (American Society for Testing and Materials). Use the CAMTROL SYSTEM to make wise chain purchasing decisions. Use it to compare the various categories of chain, to choose the right chain for the job according to the price per thousand pounds of working load instead of buying on a price per foot. Consult your Campbell Chain distributor for current prices. Then refer to the chart below and divide the price per foot by the working load limit (in thousands of pounds) shown in the table. By using this comparison system you will discover that you can buy a smaller, easier to handle chain, and at less cost based on its working load limit. Variations in finish or heat treatment The mechanical properties shown on the Camtrol Chart apply only to the various chains in their standard finish and heat treated condition. Finishes such as galvanizing or electroplating may reduce strengths. The manufacturer s revised recommendations should be solicited when such treatments are desirable for specific applications. Hallmarking (Identification) All System 4, 7, 8, and 0 chains and all System chains /6 (8 mm) and larger are marked with the grade identifier approximately every 2 or less. Please refer to the chain type of interest in this catalog for the specific hallmarks. Chain Grade Camtrol System Number Nominal Dimensions Trade Weight Per Working Load Diameter Inside Length Inside Width 00 Feet Limit in. mm in. mm in. mm in. mm lb kg lb kg 0 /8 4.6 4.0.89 22.6.29 7. 22 0 400 80 0 /6..20..9 24..4 8.6 6 800 6 0 /4 7.260 7.0.20 0.0.4.40 6 2,00 80 0 /6 8.2 8.0.27 2.27.47.9 8 8,900 860 0 /8 0.69 0.0.6 4.46.7 4.47 2 7 2,60,200 0 /2.480.0.70 4.8.7 9.00 27 08 4,00 2,00 0 /8 6.66 6.7 2.0.4.87 22.09 90 77 6,900,0 0 /4 20.78 9.8 2.70 68.8.02 26.00 24 0,600 4,80 0 7/8 22.906 2.0 2.4 9.44.7 4.80 770 49 2,800,80 4 4 /4 7.276 7.0.20 0.0.4.40 6 28 2,600,80 4 4 /6 8.0 8.4.27 2.27.47.94 02 46,900,770 4 4 /8 0.94 0.0. 29.2.8 4.7 60 7,400 2,40 4 4 7/6.9.468.9.29 2.77.67 7.02 26 98 7,200,270 4 4 /2..0.70 4.8.7 9.00 260 8 9,200 4,70 4 4 /8 6.66 6.7.94 49.27.9 2.62 6 6,000,90 4 4 /4 20.78 2.0 2.2 6..0 27.94 24 20,200 9,80 70 7 /4 7.2 7.9.94 2.88.46.68 9 4,0,40 70 7 /6 8.7.4 8.7.0 2.6.48.68 0 4,700 2,0 70 7 /8 0.406 0.6 4.46.7 4.47 0 68 6,600 2,990 70 7 7/6.9.468.9.29 2.77.67 7.02 22 96 8,70,970 70 7 /2..0.70 4.8.7 9.00 260 8,00,0 70 7 /8 6.60 6.0.9 49.02.87 22.0 7 70,800 7,70 80 8 7/2..28..69 7..0 7.62 4 20 2,00 970 80 8 /6 8. 8.0.94 2.88.46.68 92 42 4,00 2,000 80 8 26.000 2.4 2.80 7.2.40.6 96 48 47,700 2,600 80 8 /4 2.20.8.0 88.90.7 44.4 2 692 72,00 2,800 6 6 /2 8.00 8. 4.49 4.04.94 49.27 240 97 80,000 6,400 00 0 9/2 7.28 7.2.86 2.80.4.40 74 4 4,00,90 00 0 /8 0.402 0.2.22.00. 4.00 48 67 8,800,990 00 0 /2.22.2.4 9.90.4 9.0 20,000 6,800 00 0 /8 6.64 6..9 49.00.87 22.0 79 72 22,600 0,20 00 0 /4 20.802 20.4 2.42 6.0.09 27.70 98 27,00 6,000 00 0 7/8 22.882 22.4 2.70 68.2.28 2.48 77 42,700 9,400 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

Important Chain Terms chain products chain products Chain WORKING LOAD LIMIT The working load limit (rated capacity) is the maximum combined static and dynamic load in pounds or kilograms that should never be applied to the product in service, even when the product is new, and when the load is uniformly applied in direct tension to the product. PROOF TEST The proof test is a quality control test applied to chain for the purpose of verifying weld and material quality. It is the minimum force in pounds or newtons that the chain has withstood in direct tension as part of the manufacturing process. Proof testing assures that the chain is more than capable of performing at its rated working load limit. Proof test loads are a manufacturing integrity test and shall not be used as criteria for service or design purposes. All Campbell proof tested chain and components are proof tested in accordance with the applicable ASTM, NACM and AISI/ASME requirements. Warnings, Cautions, Inspection and Proper Use of Chain Campbell chain products and components are designed and built for rugged lasting service. As with any quality product certain precautions and standards of treatment should be observed. Proper care will extend the useful life of the product. INSTRUCTIONS REGARDING COMPONENTS AND FITTINGS Components, such as hooks or shackles, should have at least the same working load limit (rated capacity) as the chain with which they are used. If not, the assembly shall be rated to the capacity of the weakest component. Campbell offers a full line of components engineered specifically to be compatible with our chain products. S AND CAUTIONS The use of chain is subject to certain hazards that cannot be met by mechanical or manufacturing means, but only by the exercise of intelligence, care, and common sense Do not exceed the working load limit of the chain or any component Chemically active environments may adversely affect chain and components. Do not use in highly acidic or caustic environments. Campbell should be contacted if the chain will be exposed to chemically active environments during use High and low temperatures will affect chain and components. Campbell should be contacted if temperatures below -20 F (-29 C) or above 400 F (200 C) will be experienced Chains used in certain applications are subject to governmental regulations. Please follow all Federal, State and/or Local Department of Transportation, OSHA, or other applicable standards and regulations when using Campbell products Never field weld or repair chain See other specific information under Inspection and Proper Use sections INSPECTION Regular inspections should be conducted on chain to detect damage or deterioration from use. The chain should be inspected for any of the below conditions. If present, the chain should immediately be removed from service. Cracks in the chain or any component Excessive nicks or gouges Excessive wear. Chain should be removed from service if the thickness at any point on the link is below the value shown in the Chain Minimum Allowable Thickness chart. All other components should be removed from service if any dimension is worn by more than 0% from the original dimension Stretched, bent, twisted, or distorted chain links or components Excessive corrosion Evidence of heat damage Evidence of field welding or weld splatter Any other condition which questions the integrity of the chain Para prevenir la posibilidad de una lesión personal sería: PROPER USE NO EXCEDA los límites de carga de las cadenas o componentes. To protect the users and to prevent damage to the chain, the follow- NO LA UTILICE para cargar hacia arriba o para izar. ing NO safe LA practices UTILICE should si la cadena be followed: o los componentes están visualmente Select distorsionados a chain suitable o gastados. for the application and environment The hooks or other components should be of a size to fit the intended connections Avoid shock loading Pad all sharp edges or corners in contact with the chain Rig so that the load is properly seated in the hooks or other components. Avoid tip loading of hooks and side loadingof chain and components Avoid twisting or kinking the chain Never knot chain Purchasers please note that all Warnings and Cautions apply to chain as well as all components and fittings. Purchasers are responsible for conveying the Warnings and Cautions, including the Inspection and Proper Use section information to the end user. Campbell denies any liability for damage that results from use in excess of the working load limit or any abuse or misuse of the product. Any questions concerning the use of Campbell products may be directed to your Apex Tool Group Sales representative or Apex Tool Group Customer Service representative. OTHER PRODUCTS Campbell produces a number of products for specialty applications. Please contact your Apex Tool Group Sales representative, or Customer Service representative, if you have special requirements. Not all products produced by Campbell appear in this catalog. Campbell can produce engineered chain to meet customer design specifications, and also produces a variety of chain assemblies. Minimum order quantities may apply to special order products. NOTICE: The product specifications and dimensions are as accurate as possible at the time of printing. However, because we are continually improving the quality and design of our products, they can change without notice. The dimensions and weights are approximate nominal values, and some variation will occur. If specific dimensional requirements are necessary for the application, please contact your Apex Tool Group Sales representative, or Customer Service representative. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 4

chain products www.apexhandtools.com/campbell Care and Maintenance of Chain Minimum Allowable Thickness Chart Nominal Min. Allowable Trade Chain Type Material Diamter Thickness on Link in. mm or Grade in. mm in. mm 4.0 Machine, Coil 0.20.0 0.04 2.64.4 Machine, Coil 0..4 0.7 2.97 2.8 Machine, Coil 0.48.8 0.28.2 4. Machine, Coil 0.62 4. 0.40.6 /0 4. Machine, Coil 0.77 4. 0..89 2/0 4.9 Machine, Coil, Passing Link 0.92 4.9 0.66 4.22 /0. Machine, Coil 0.207. 0.79 4. 4/0. Machine, Coil, Passing Link 0.28. 0.89 4.80 /0 6.4 Machine, Coil 0.20 6.4 0.27.0 /8 4.0 Grade 0 0.6 4.0 0..4 /6. Grade 0, 80, 00 0.27. 0.89 4.80 /4-9/2 7.0 Grade 0, 4, 70, 80, 00 (Grade 4 = 0.28) 0.276 7.0 0.29 6.07 /6 8.4 Grade 0 0. 8.4 0.286 7.28 /6 8.7 Grade 4, 70 0.4 8.7 0.297 7.4 /6 8.0 Grade 80, 00 0.2 8.0 0.27 6.9 /8 0.0 Grade 0, 80, 00 0.94 0.0 0.42 8.69 /8 0. Grade 4, 70 0.406 0. 0. 8.9 7/6.9 Grade 0, 4, 70 0.468.9 0.40 0.0 /2.0 Grade 0, 80, 00 0.2.0 0.44.26 /2. Grade 4, 70 0.. 0.460.68 /8 6.0 Grade 0, 4, 70 0.60 6.0 0.46.87 /4 20.0 Grade 80, 00 0.787 20.0 0.687 7.4 7/8 20.0 Grade 0, 4, 80, 00 0.866 22.0 0.70 9.0 26.0 Grade 0, 80.020 26.0 0.887 22. -/4 2.0 Grade 80.260 2.0.09 27.7 -/2 8.0 Grade 6.00 8.0.00 2.99 Chain Warning: Remove chain from service if the thickness is less than the minimum shown, at any location on the link (S.C.) stands for Self Colored. A finish without any cleaning operations to remove oil or dirt or surface oxidation from the welding process (BRT) stands for Bright. A finish where the surface is cleaned by shot peening or tumbling to produce a clean bright surface (Z.P.) stands for Zinc Plated, Campbell s method of zinc electroplating. The zinc electroplating is an attractive finish that also serves to prevent the onset of rust on the chain. (Y.C.) stands for Yellow Chromate, a name for Campbell s method of zinc electroplating with a yellow chromate finish. The zinc electroplating is an attractive finish that also serves to prevent the onset of rust on the chain. The chromate finish serves to protect the zinc electroplate (GALV) stands for Hot-dip Galvanized. Hot-dip galvanizing is a process where the chain is immersed in molton zinc. This produces both a chemical reaction between the steel and the zinc, Finish Abbreviations as well as an outside layer of zinc on the chain. The end result is an adherent coating of zinc that is much thicker than that produced by zinc electroplating. Corrosion resistance is proportional to zinc thickness, and therefore galvanized products offer superior corrosion resistance to electroplated products. Note: Due to the temperature of the molten zinc, the strengths of hot-dip galvanized products are often reduced by % (M-GALV) stands for Mechanically Galvanized. Mechanical galvanizing is a process where zinc powder is mechanically applied to the outside of the chain. Because this is a mechanical process and not a molten process, the coating is very uniform (Polycoated) is a finish where the chain is coated with a colored plastic powder which is then fused onto each link Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

chain products System, Proof Coil Chain (Grade 0) Chain Drums Half Drums Round Pails SquarePails Reels Uses: Excellent general-purpose chain of standard commercial quality Frequently used for fabricating tow chains, binding or tie down chains and logging chains Standard Material: Low carbon steel Standard Finish: Self Colored (S.C.) or Galvanized (GALV); also available Zinc Plated (Z.P.) /6 through /2 ; and polycoated Hallmarking: C or M on /6 (8mm) and larger Proof tested Packaging: Drums and half drums (order unit is feet ), pails and refill reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Drums, System, Proof Coil Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Self Colored Zinc Plated Galvanized Working Length/ Dia. Length Width Cat. UPC Cat. UPC Cat. UPC Load Limit ft. per Lb/ Links/ in. mm in. mm in. mm in. mm 02048 02048 02048 lb kg drum 00 ft. 8 4.6 4.89 2.29 7 020202 0692 -- -- 02022 06949 400 80 000 9. 6 6.2 6.9 24.4 9 02002 06970 02022 07007 0202 0704 800 6 000 2.6 4 7.26 7.20 0.4 020402 07076 020422 0706 02042 0744 00 80 800 6 0.0 6 8. 8.27 2.47 2 02002 0720 02022 0724 0202 0728 900 860 0 8 9.4 8 0.7 0.6.7 4 020602 07 020622 077 02062 0740 260 200 400 2 8.8 7 6 2.47 2.7.7 9 -- -- -- -- 02072 07489 700 680 00 20 8.8 2.48.70 4.7 9 020802 0702 020822 0726 02082 077 400 200 200 28 7. 8 6.66 7 2.0.87 22 02002 079 -- -- 0202 0768 6900 0 0 90.7 4 20.78 20 2.70 69.02 26 02202 0762 -- -- 0222 0766 0,600 4800 00 6 4.4 Half Drums, System, Proof Coil Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Self Colored Zinc Plated Galvanized Working Length/ Dia. Length Width Cat. UPC Cat. UPC Cat. UPC Load Limit ft. per Lb/ Links/ in. mm in. mm in. mm in. mm 02048 02048 02048 lb kg drum 00 ft. 6 6.2 6.9 24.4 9 02000 0696 -- -- 0200 0702 800 6 00 2.6 4 7.26 7.20 0.4 020400 0702 -- -- 02040 0720 00 80 400 6 0.0 6 8. 8.27 2.47 2 02000 0782 -- -- 0200 07267 900 860 27 8 9.4 8 0.7 0.6.7 4 020600 07 -- -- 02060 0797 260 200 200 2 8.8 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 6

chain products www.apexhandtools.com/campbell Round Pails, System, Proof Coil Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Self Colored Zinc Plated Galvanized Working Dia. Length Width Cat. UPC Cat. UPC Cat. UPC Load Limit Ft. per Lb/ Links/ in. mm in. mm in. mm in. mm 02048 02048 02048 lb kg pail pail ft. 6 6.2 6.9 24.4 9 -- -- 0402 0799 040 08004 800 6 20 88 2.6 4 7.26 7.20 0.4 020402 07076 020422 0706 02042 0744 00 80 800 6 0.0 6 8. 8.27 2.47 2 02002 0720 02022 0724 0202 0728 900 860 0 8 9.4 8 0.7 0.6.7 4 020602 07 020622 077 02062 0740 260 200 400 2 8.8 7 6 2.47 2.7.7 9 -- -- -- -- 02072 07489 700 680 00 20 8.8 2.48.70 4.7 9 020802 0702 020822 0726 02082 077 400 200 200 28 7. 8 6.66 7 2.0.87 22 02002 079 -- -- 0202 0768 6900 0 0 90.7 4 20.78 20 2.70 69.02 26 02202 0762 -- -- 0222 0766 0,600 4800 00 6 4.4 Chain Approximate. Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Zinc Plated Galvanized Working Dia. Length Width Cat. UPC Cat. UPC Load Limit Ft. per Lb/ Links/ in. mm in. mm in. mm in. mm 02048 02048 lb kg pail pail ft. 8 4.6 4.89 2.29 7 04226 9060 -- -- 400 80 200 8. 8 4.6 4.89 2.29 7 -- -- 0426 8926 400 80 2 62. 6 6.2 6.9 24.4 9 0426 808 046 806 800 6 0 2.6 4 7.26 7.20 0.4 04426 8072 0446 8089 00 80 00 6 0.0 6 8. 8.27 2.47 2 0426 8096 046 802 900 860 7 62 9.4 8 0.7 0.6.7 4 04626 89 0466 826 260 200 4 6 8.8 Approximate. Square Pails, System, Proof Coil Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Polycoated** Working Dia. Length Width Cat. UPC Load Limit Ft. per Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg pail pail ft. 6 8. 8.27 2.47 2 HV04226 87940 900 860 7 62 9.4 ** Hi-visibility orange polycoated. Approximate. Square Pails, System, Proof Coil Chain (Order Unit is Each Pail ) Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 7

chain products Chain Square Pails, Anchor lead, System, Proof Coil Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Galvanized & PolyCoated** Working Dia. Length Width Cat. UPC Load Limit Ft. per Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg pail pail ft. 6 8. 8.27 2.47 2 02006 888 900 860 7 62 9.4 ** White polycoated. Approximate. Reels, System, Proof Coil Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Zinc Plated Polycoated Yellow Working Reel Dia. Length Width Cat. UPC Cat. UPC Load Limit Feet/ Lb/ Width in. mm in. mm in. mm in. mm 02048 02048 lb kg Reel Reel in. 6 6.2 6.9 24.4 9 072027 064982 PD072027 84642 800 6 00 0.7 4 7.26 7.20 0.4 072227 8270 -- -- 00 80 6 6 0.7 4 7.26 7.20 0.4 -- -- PD072227 89 00 80 60 6 0.7 6 8. 8.27 2.47 2 0722227 8287 -- -- 900 860 60 0 0.7 8 0.7 0.6.7 4 072227 8294 -- -- 260 200 44 0.7 Drums, Marine, Proof Coil Chain (Order Unit is Feet ) An excellent low-carbon steel chain made with a shorter link length than standard proof coil Packaging: Drums (order unit is feet ) Standard finish: Hot Dipped Galvanized (GALV) Proof tested Drums Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Working Dia. Length Width Cat. UPC Load Limit in. mm in. mm in. mm in. mm 02048 lb kg Hot Dipped Galvanized 4 7.28 7.00 2.0 0282 7064 00 90 800 7 2 6 8.4 9.0 28.0 02822 7062 900 862 0 02 8 0.4 0.2.62 6 0282 70669 260 202 400 60 9.7 2..0 8.8 2 02842 70676 400 204 200 277 7.8 Self-colored 4 7.28 7.00 2.0 02802 82969 00 90 800 7 2 6 8.4 9.0 28.0 028202 82976 900 862 0 02 8 0.4 0.2.62 6 02802 8298 260 202 400 60 9.7 These items are made to order. Feet/ Drum Lb/ 00 Links/ foot Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 8

chain products www.apexhandtools.com/campbell Drums, Mooring Chain (Order Unit is Feet ) An excellent low-carbon steel chain with a long link design for mooring applications The longer link allows the use of a shackle anywhere in the length of chain, not just at end links Greater Working Load Limit than Proof Coil Standard finish: Hot Dipped Galvanized (GALV) Packaging: Drums (order unit is feet ) Proof tested Drums Chain Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Hot Dipped Galvanized Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Drum 00 foot 8 0.4 0.2.62 6 0282 70669 260 202 400 60 9.7 2..0 8.8 2 02842 70676 400 204 200 277 7.8 8 6.6 6 2.2 64.94 24 0292 2078 9000 4082 0 40 -- 4 20.79 20.00 76.6 29 02962 208 00 62 00 0 -- Made especially for windlass or pocket wheel applications, low carbon steel Packaged in drums, Order unit is feet Standard finish: Self-colored (S.C.) Proof tested Drums, BBB Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Working Dia. Length Width Cat. UPC Load Limit Ft. per Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg pail pail ft. Self-colored 9 6 4.9.8 40.78 20 00902 0849 87 266 200 0 7 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 9

chain products System 4, High Test Chain (Grade 4) Chain Uses: Designed for use in load binding, towing, logging and other applications requiring high strength Standard Material: Carbon steel Standard Finish: Bright (BRT) and Galvanized(GALV); Zinc Plated (Z.P.) available in drums, pails and reels Hallmarking: C4 or M4 Drums Round Pails Square Pails Proof tested Packaging: Drums (order unit is feet ), pails and refill reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Drums, System 4, High Test Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Bright Zinc Plated Galvanized Working Dia. Length Width Load Limit Feet/ Cat. UPC Cat. UPC Cat. UPC Drum Lb/ Links/ in. mm in. mm in. mm in. mm 02048 02048 02048 lb kg 00 ft. 4 7.28 7.20 0.4 08042 08769 080422 08790 08042 08820 2600 80 800 6 0.0 6 8. 8.27 2.47 2 0802 088 08022 08882 0802 0892 900 770 0 9 9.4 8 0.9 0. 29.8 08062 0894 -- -- 08062 0908 400 240 400 0.4 2..70 4.7 9 08082 09094 -- -- 08082 09 9200 470 200 260 7. 8 6.66 7.94 49.9 24 0802 0986 -- -- 0802 0926,000 90 0 6 6.2 4 20.78 20 2.2 6.0 28 0822 0924 -- -- -- -- 20,200 980 00 8.4 Round, Pails, System 4, High Test Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Bright Zinc Plated Working Dia. Load Limit Feet/ Length Width Cat. UPC Cat. UPC Pail Lb/ Links/ in. mm in. mm in. mm in. mm 02048 02048 lb kg Pail ft. 4 7.28 7.20 0.4 0804 09278 08042 0928 2600 80 0 98 0.0 6 8. 8.27 2.47 2 080 09292 0802 0908 900 770 00 9 9.4 8 0.9 0. 29.8 0806 09 08062 0922 400 240 7 6 0.4 Approximate. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 0

chain products www.apexhandtools.com/campbell Square, Pails, System 4, High Test Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Bright Galvanized Working Dia. Load Limit Feet/ Length Width Cat. UPC Cat. UPC Pail Lb/ Links/ in. mm in. mm in. mm in. mm 02048 02048 lb kg Pail ft. 4 7.28 7.20 0.4 08446 8 08446 886 2600 80 00 66 0.0 6 8. 8.27 2.47 2 0846 840 0846 8878 900 770 60 7 9.4 8 0.9 0. 29.8 08466 87 08466 888 400 240 40 6 0.4 Chain Approximate. Square, Pails, System 4, High Test Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Polycoated Hi-Visibility Orange Working Dia. Length Width Cat. UPC Load Limit Ft. per Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg pail pail ft. 6 8. 8.27 2.47 2 HV08426 87698 900 770 60 0 9.4 Approximate. Drums, Sweep Chain (Order Unit is Feet ) Produced specifically for scallop and oyster dredging Thru hardened for wear resistance Packaged in drums, Order unit is feet Proof tested Drums Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Bright Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Drum 00 ft. 6 6.66 6.94 49.9 24 08092 7992 800 770 0 409 6.9 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

chain products Drums, Marine Alloy Trawl Chain (Order Unit is Feet ) Chain Midlink Made of high strength, heat treated alloy steel Designed for use with the larger nets in the trawling industry Grade 80 strengths Proof tested Special heat treatment for the trawling industry Packaged in drums, Order unit is feet Long Link Drums Nominal Dimensions (in. and mm) Trade Inside Dimensions Bright Working Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Drum 00 ft. 2 Long Link. 80.97 24 04072 9042 2000 44 00 90 -- 8 6 Long Link.7 94.00 2 040762 90469 800 820 0 -- 4 9 Long Link.99 0.29 040772 90476 2800 287 00 480 -- 7 8 22 Midlink 4.00 02. 29 040682 9044 4200 80 60 -- These items are made to order. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 2

chain products www.apexhandtools.com/campbell System 7, Transport Chain (Grade 70) Chain Drums Half Drums Round Pails SquarePails Uses: For use in load binding, towing and logging Can be used in accordance with Department of Transportation regulations Standard Material: Heat treated carbon steel Standard Finish: Zinc electroplate with yellow chromate conversion coating Hallmarking: C7 or M7 Proof tested Packaging: Drums and half drums (order unit is feet ), pails (order unit is each ) Do not use for overhead lifting Drums, System 7, Transport Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Drum 00 foot 4 7. 8.94 24.46 2 0042 0676 0 40 800 94 2.8 6 8.4 9.0 26.48 2 002 06800 4700 20 0.9 8 0.4 0.6.7 4 0062 06848 6600 2990 400 0 8.8 7 6 2.47 2.29.67 7 0072 06886 870 970 00 22 9. 2..70 4.7 9 0082 0696 00 0 200 260 7. Half Drums, System 7, Transport Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Drum 00 foot 4 7. 8.94 24.46 2 0040 06749 0 40 400 94 2.8 6 8.4 9.0 26.48 2 000 06787 4700 20 27.9 8 0.4 0.6.7 4 0060 06824 6600 2990 200 0 8.8 2..70 4.7 9 0080 0689 00 0 00 260 7. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

chain products Chain Round Pails, System 7, Transport Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Pail Pail foot 4 7. 8.94 24.46 2 004 06770 0 40 0 9 2.8 6 8.4 9.0 26.48 2 00 0687 4700 20 00 4.9 8 0.4 0.6.7 4 006 068 6600 2990 7 8.8 Approximate. Square Pails, System 7, Transport Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Pail Pail foot 4 7. 8.94 24.46 2 00426 8867 0 40 6 64 2.8 6 8.4 9.0 26.48 2 0026 8874 4700 20 0 60.9 8 0.4 0.6.7 4 00626 8669 6600 2990 4 68 8.8 Approximate. Drums, Tuna Net Chain (Order Unit is Feet ) Made of high strength, heat treated steel Designed for sinker lines and bridles in purse seining Hot dipped Galvanized (GALV) Proof tested Packaged in drums, Order unit is feet Drums Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Hot Dipped Galvanized Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Drum 00 foot 8 0.4 0.6 4.7 4 0462 7480 600 20 400 9.7 7 6 2.47 2.7.7 9 0472 06424 700 40 00 27 8.7 2.0.70 4.7 9 0482 064272 9600 460 200 28 7.7 8 6.6 6.9 49.87 22 0492 7707 00 640 0 7 6.2 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 4

chain products www.apexhandtools.com/campbell Drums, Dock Fender Chain (Order Unit is Feet ) High tensile chain holds thick rubber fenders to dock sides Galvanized Packaged in drums, Order unit is feet Chain Drums Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Hot Dipped Galvanized Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Drum 00 foot 8 6.66 6.7 9.90 2 06 8887 200 860 -- 20 -- 4 9.78 20.7 9. 29 066 8894 2200 000 -- 446 -- 2.00 26 4. 0.8 068 897 40000 8200 -- 64 -- These items are made to order. Beacon Fishing Chain Drums Uses: Designed to accommodate all types of chain needs in the trawling and marine industry Standard Material: Heat treated carbon steel Standard Finish: Bright (BRT) Hallmarking: CB and a Lighthouse Beacon Proof tested Packaging: Drums (order unit is feet ) Do not use for overhead lifting Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Drum Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Drum 00 foot 8 0.9 0.8 40.9 02062 06402 6600 2990 200 4 7.6 2. 2.0 2.8 2 02082 0649 00 0 200 20.9 8 6.6 6 2.2 64.94 24 0202 06426 800 767 200 40 4.8 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

chain products System 8, Cam-Alloy Chain (Grade 80) Chain Drums Uses: Specifically recommended for overhead lifting Standard Material: Alloy steel, heat treated Standard Finish: Bright (BRT) Hallmarking: C8 or CA8 and traceability code Proof tested Packaging: Continuous lengths in drums (order unit is feet ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Drum Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Drum 00 foot 7 2..22 6.69 8.0 8 04002 062 200 970 800 4 7. 6 8.2 8.94 24.46 2 04002 0667 400 2000 00 92 2.8 26.00 2 2.80 7.40 6 04062 060 47700 2600 00 96 4. 4 2.2 2.0 89.7 44 040202 064 7200 2800 60 2. System 0, Cam-Alloy Chain (Grade 00) Uses: Specifically recommended for overhead lifting. 2% stronger than System 8. Enables you to perform same lifts with lighter weight chain Standard Material: Alloy steel, heat treated Proof tested Drums Standard Finish: Bright (BRT) System 0 chain should not be plated or galvanized Hallmarking: C0 and traceability code Packaging: Continuous lengths in drums (order unit is feet ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Drum Working Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg Drum 00 foot 9 2 7.29 7.87 22.4 0 04022 82204 400 90 00 74.8 8 0.40 0.22.7 4 04042 822 8800 4000 00 48 0.0 2.2.8 40.7 9 0402 82228 000 6800 00 20 7.8 8 6.64 6.9 49.87 22 04062 822 22600 000 200 79 6. 4 20.80 20 2.42 6.09 28 04072 82242 00 6000 00 98. 7 8 22.88 22 2.70 68.28 2 04082 06497 42700 9400 00 77 4.4 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 6

chain products www.apexhandtools.com/campbell Stainless Steel Chain Chain Uses: Food processing, chemical and marine applications, wherever non-magnetic, electrically welded corrosion resistant chain is needed Standard Material: Type 6L Stainless Standard Finish: Bright (BRT) Hallmarking: 6 Proof tested Packaging: Bulk. Order unit is feet Do not use for overhead lifting Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Bright Working Dia. Length Width Cat. UPC Load Limit Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg 00 foot 2 4.6 4.77 9.28 7 0924 77422 00 226 2.6 6.96.9 2.4 8 0927 7604 90 422 4.2 4 7.20 6.00 2.4 0929 7600 70 72 7 2.0 6 8.2 8.0 26.49 2 09 76067 2400 089 9.7 8 0.94 0.22. 09 76074 0 60 8 9.8 Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Bright Working Reel Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Width in. mm in. mm in. mm in. mm 02048 lb kg Reel Reel in. 2 4.6 4.77 9.28 7 090424 202 00 226 0 0.4. These items are cut to order. Working load limits (WLL) shown are room temperatures. Reduce WLL by % for temperatures up to 20 F, 2% between 20 F and 800 F, % between 800 F and 000 F, 0% between 000 F and 200 F, and 60% between 200 F and 400 F. Aluminum Chain Uses: Chemical processing, petroleum refining, food processing, landscaping, crowd control, wherever a non-magnetic, non-sparking chain is needed Standard Material: 06 aluminum-magnesium alloy Standard Finish: Bright (BRT) Proof tested Packaging: Bulk order unit is feet Do not use for overhead lifting or dynamic load conditions Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Working Dia. Length Width Cat. UPC Load Limit Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg 00 foot 7 64 7.26 7.06 27.7 9 062 76098 0 249 9. 6 8.4 9.4 29.49 2 06 7604 80 80 6 0. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 7

chain products Straight Link Machine Chain Chain Individual chain links shown actual size in reference section page 44. Carton Reel Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT), Zinc Plated (Z.P.) and Brass Glo Proof tested Packaging: 00-foot cartons (order unit is feet ), refill reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Carton - Straight Link Machine Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Bright Zinc Plated Working Trade Length Dia. Length Width Load Limit Cat. UPC Cat. UPC Carton/ Lb/ Links/ in. mm in. mm in. mm 02048 02048 lb kg ft. 00 ft. 4.2. 4.2 -- -- 00424 060908 2 98 00 2.8.4.9.24 6 -- -- 0024 060878 270 22 00 20. 2. 4.6.26 7 -- -- 00224 060847 2 47 00 9 9.7 /0.8 4.74 9. 8 -- -- 0024 060946 46 2 00 27 6.2 2/0.8.78 20.4 9 0204 060977 02024 060984 4 247 00 29.4 /0.2.0 26.6 9 -- -- 0024 060 6 288 00 7.9 4/0.2 6.0 26.8 0 -- -- 04024 06042 700 8 00 47.7 /0.2 6.07 27.44 004 0607 0024 06080 92 420 00 2.2 Reels-Straight Link Machine Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Brass Glo Working Trade Reel Dia. Length Width Load Limit Cat. UPC Cat. UPC Feet/ Lb/ Links/ Width in. mm in. mm in. mm 02048 02048 lb kg Reel Reel ft. in. 4.2. 4.2 AW00427 484 -- -- 2 98 00 2 22..4.9.24 6 -- -- 07267 06484 270 22 0 9 20. 2. 4.6.26 7 0726727 8447 -- -- 2 47 2 26 9.7 0.7 (Reels used on Campbell merchandisers) Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 8

chain products www.apexhandtools.com/campbell Twist Link Machine Chain Chain Carton Reel Round Pail Square Pail Individual chain links shown actual size in reference section page 4. Uses: General utility Standard Material: Low carbon steel Standard Finish: Bright (BRT), Zinc Plated (Z.P.), Galvanized (GALV) and Brass Glo Packaging: 00 ft. cartons (order unit is feet ), refill reels to fit Campbell merchandisers (order unit is each ) and pails (order unit is each ) Do not use for overhead lifting Cartons - Twist Link Machine Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Bright Zinc Plated Galvanized Working Length Trade Dia. Length Width Cat. UPC Cat. UPC Cat. UPC Load Limit Carton/ Lb/ Links/ in. mm in. mm in. mm 02048 02048 02048 lb kg ft. 00 ft..4.6 4.20 -- -- 02024 066 -- -- 2 6 00 6 2.4 2. 4.8.2 02024 0627 020224 064 -- -- 0 4 00 20 20.7 /0.8 4.68 7.26 7 -- -- 02024 0629 -- -- 440 200 00 28 7.6 2/0.8.7 9.28 7 02204 062 -- -- -- -- 20 26 00 6.4 4/0.2 6.89 2.2 8 -- -- 024024 060 -- -- 670 04 00 48. /0.2 6.00 2.7 9 -- -- -- -- 0204 0649 880 99 00 6 2.0 Reels-Twist Link Machine Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Brass Glo Zinc Plated Working Trade Reel Dia. Length Width Load Limit Cat. UPC Cat. UPC Feet/ Lb/ Links/ Width in. mm in. mm in. mm 02048 02048 lb kg Reel Reel ft. in. 4.2.2.7 4 -- -- AW020427 49 20 9 00 2. 2. 4.8.2 07288 06488 -- -- 0 4 70 20.7. 2. 4.8.2 -- -- 0726627 84468 0 4 2 27 20.7. 2/0.8.7 9.28 7 -- -- 072227 800 20 26 70 2 6. Rd. Pail-Twist Link Machine Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Pail Pail ft. 2/0.8.7 9.28 7 02900 6944 20 26 00 9 6.4 Approximate. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 9

chain products Chain Square Pails - Twist Link Machine Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Pail Pail ft. 2/0.8.7 9.28 7 022026 87 20 26 7 4 6.4 Approximate. Straight Link Coil Chain Individual chain links shown actual size in reference section page 44. Carton Reel Round Pail Square Pail Uses: Typical uses include tailgates, barrier guards, animal ties Standard Material: Low carbon steel Standard Finish: Zinc Plated (Z.P.) and polycoated Proof tested Green sleeve used in swing set application Packaging: 00-foot cartons (order unit is feet ), pails (order unit is each ), refill reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Cartons - Straight Link Coil Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Length Dia. Length Width Load Limit ft,/ Cat. UPC Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Carton 00 ft. 4.2. 28.2 00424 064 20 9 00 0 0.8.4.7 0.24 6 0024 06424 2 6 00 0. 2. 4.8 0.26 7 00224 0694 0 4 00 0.2.6 4.2 2.28 7 0024 066 70 68 00 9 9.6 /0.8 4.2 2. 8 0024 066 440 200 00 22 9.6 2/0.8.29.4 9 02024 0678 20 26 00 24 9. /0.2.0.6 9 0024 06622 60 274 00 9.2 4/0.22 6.9.8 0 04024 06660 670 04 00 8.6 /0.24 6.2 9.44 0024 0672 880 99 00 4 7.9 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 20

chain products www.apexhandtools.com/campbell Reels-Straight Link Coil Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Yellow Polycoated Zinc Plated Working Trade Reel Dia. Length Width Load Limit Cat. UPC Cat. UPC Feet/ Lb/ Links/ Width in. mm in. mm in. mm 02048 02048 lb kg Reel Reel ft. in. 4.2. 28.2 -- -- AW00427 444 20 9 00 0.8. 2. 4.8 0.26 7 -- -- 0726827 84482 0 4 2 2 0.2 0.7 2/0.9.29.4 9 -- -- 0722827 884 20 26 40 4 9.. 2/0.9.29.4 9 -- -- 072627 064869 20 26 2 7 9. 0.7 2/0.9.29.4 9 PD0722627 8409 -- -- 20 26 20 9. 0.7 /0.2.0.6 9 -- -- 072427 772 60 274 00 9.2 0.7 Chain Reels-Straight Link Coil Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Green Sleeve Working Trade Reel Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ Width in. mm in. mm in. mm 02048 lb kg Reel Reel ft. in. 2/0.9.29.4 9 PS02027 208997 20 26 60 2 9. 0.7 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. Round Pails - Straight Link Coil Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Pail Pail ft. 2/0.8.29.4 9 0202 066 20 26 400 97 9. Approximate. Square Pails - Straight Link Coil Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Pail Pail ft..6 4.2 2.28 7 0026 8764 70 68 0 66 9.6 /0.8 4.2 2. 8 0026 87667 440 200 20 9.6 2/0.8.29.4 9 02426 888 20 26 22 9. /0.24 6.2 9.44 0026 87674 880 99 40 7.7 7.9 Approximate. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 2

chain products Studio Chain Chain Uses: Hanging theatrical lights and fixtures Standard Material: Low carbon steel Standard Finish: Bright (BRT) Proof tested Carton Packaging: 00 feet, cartons Do not use for overhead lifting Hallmarking: CS and USA Also available as SPECIAL ORDER in Drums Carton - Studio Chain (Order unit is Feet ) Nominal Dimensions (in. and mm) Trade Mat. Inside Dimensions Working Dia. Length Width Cat. UPC Load Limit Lb/ Links/ in. mm in. mm in. mm in. mm 02048 lb kg 00 foot 6/0 --.28 7.0 8.47 2 060 92876 2000 907 6 8 Twist Link Coil Chain Individual chain links shown actual size in reference section page 4. Carton Reel Uses: Typical uses include tailgates, barrier guards, animal ties. Difference over straight link is twist link chain lies flat Standard Material: Low carbon steel Standard Finish: Zinc Plated (Z.P.), Brass-Glo Packaging: 00-foot cartons (order unit is feet ), refill reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Cartons - Twist Link Coil Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Dia. Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Carton 00 foot.4.4 29.2 04024 06868 240 09 00 0. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 22

chain products www.apexhandtools.com/campbell Reels - Twist Link Coil Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Brass Glo Working Trade Reel Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ Width in. mm in. mm in. mm 02048 lb kg Reel Reel ft. in..4.4 29.2 07267 064777 240 09 0 7. 0.. Chain Passing Link Chain Carton Reel Square Pail Uses: General utility, farm and animal Standard Material: Low carbon steel Standard Finish: Zinc Plated (Z.P.) and Galvanized (GALV) Individual chain links shown actual size in reference section page 4. Proof tested Packaging: 00 ft. cartons (order unit is feet ), refill reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Cartons - Passing Link Chain (Order unit is Feet ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Length/ Dia. Length Width Load Limit Carton Cat. UPC Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Feet 00 ft. 4/0.22 6.88 22.0 004024 060786 600 272 00 4.8 Reels - Passing Link Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Reel Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ Width in. mm in. mm in. mm 02048 lb kg Reel Reel ft. in. 2/0.8.88 22.47 2 0722927 87 40 204 2 6..7 0.7 2/0.8.88 22.47 2 072297 8478 40 204 0 4..7. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 2

chain products Chain Square Pails - Passing Link Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Pail Pail ft. 2/0.8.88 22.47 2 00926 864 40 204 200 7.8.8 Approximate. Handy Link Utility Chain Square Pail Reel Uses: For hanging fixtures and plants, animal ties Standard Material: Low carbon steel Standard Finish: Zinc Plated (Z.P.) Proof tested Packaging: Refill reels (order unit is each ), 00 foot square pails (order unit is each ) Do not use for overhead lifting Square Pails - Handy Link Utility Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Pail Pail ft. 20.20. 4.4 9 09626 89 2 6 00 0 8.9 Approximate. Reels - Handy Link Utility Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Reel Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ Width in. mm in. mm in. mm 02048 lb kg Reel Reel ft. in. 20.20. 4.4 9 07269 064784 2 6 7 7. 8.9 0.7 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 24

chain products www.apexhandtools.com/campbell Lock Link, Single Loop Chain Chain Individual chain links shown actual size in reference section page 4. Carton Reel Uses: Ideal for sprocket wheel, overhead door chains, general utility use Standard Material: Low carbon steel, also available in stainless and brass on special order Standard Finish: Zinc Plated (Z.P.), Galvanized (GALV) Wrapped Packaging: 00 ft. cartons (order unit is feet ) and on reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Cartons - Lock Link, Single Loop Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Galvanized Trade Standard Working Length Dia. Length Width Cat. UPC Cat. UPC End Types Load Limit ft./ Lb/ Links/ in. mm in. mm in. mm 02048 02048 Wrapped lb kg Carton 00 ft. 2.09 2.08 27 -- -- 0740224 06628 074024 06622 X 70 00 9. /0.2.29 -- -- 074024 066290 07404 06620 X 26 20 00 6 9. 2/0.4.48 8 -- -- 0742024 0667 074204 06699 X 40 4 00 2 8. /0. 4.6 4 -- -- 074024 06642 -- -- X 40 84 00 26 7.4 2/0.8.78 20.4 9 0204 060977 02024 060984 X 4 247 00 29.4 /0.2.0 26.6 9 -- -- 0024 060 X 6 288 00 7.9 4/0.6 4.80 46 -- -- 0744024 06648 074404 066 X 48 220 00 29 6.7 /0.8 4 2. -- -- 074024 06666 07404 06697 X 80 26 00 4.6 Reels - Lock Link, Single Loop Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Working Mat. Inside Dimensions Zinc Plated Galvanized Load Limit, Trade Standard Reel Dia. Length Steel Cat. UPC Cat. UPC End Types Feet/ Lb/ Links/ Width in. mm in. mm 02048 02048 Wrapped lb kg Reel Reel ft. in. 2.09 2.08 27 -- -- 074027 066269 X 70 60. 0.7 /0.2.29 074027 06606 07407 0667 X 26 20 20 40 9. 0.7 /0. 4.6 4 072427 06484 -- -- X 40 84 2 7.4 0.7 /0. 4.6 4 0722427 844 -- -- X 40 84 0 6. 7.4. 4/0.6 4.80 46 0744027 066498 074407 06628 X 48 220 00 29 6.7 0.7 /0.8 4 2. -- -- 07407 06660 X 80 26 00 4.6 0.7 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 2

chain products Brass Plumber s Chain Chain Uses: Plumbing fixtures, and other applications requiring light flat metal chain Standard Material: Brass Standard Finish: Bright (BRT) Carton Reel Packaging: 00 foot cartons (order unit is feet ) and on reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Cartons - Brass Plumber s Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Stock Inside Dimensions Bright Working Trade Thickness Length Load Limit Feet/ Cat. UPC Ctn. Lb/ Links/ in. mm in. mm 02048 lb kg 00 ft. 2/0.02. 4 087204 067877 2 0 00 2 2.8 /0.02. 4 08704 06789 6 00 2 2.8.0.6 4 08704 067778 4 20 00 4 8. Reels - Brass Plumber s Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Stock Inside Dimensions Bright Working Trade Thickness Load Limit Feet/ Reel Length Reel Width Cat. UPC Lb/ Links/ in. mm in. mm 02048 lb kg Reel ft. in. /0.02. 4 07287 06488 6 200 2.8. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 26

chain products www.apexhandtools.com/campbell Inco Double Loop Chain Chain Individual chain links shown actual size in reference section page 4. Carton Reel Round Pail Square Pail Uses: Playground and gymnasium equipment (/0 and larger), farm and animal chains, and many general-purpose applications Standard Material: Low carbon steel Standard Finish: Zinc Plated (Z.C.), Galvanized (GALV) and polycoated Packaging: 00 foot cartons, (order unit is feet ) and on reels and pails to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Note: Avoid twisting in suspension applications Cartons - Inco, Double Loop Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Galvanized Working Trade Dia. Length Width Load Limit Cat. UPC Cat. UPC Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 02048 lb kg Carton 00 ft..06 2.92 2 -- -- 07024 06686 -- -- 2 00 4.0 4.07 2.00 2 -- -- 070424 06688 -- -- 70 2 00 2.0.08 2.0 28 -- -- 07024 066764 0704 066788 90 4 00 6 0.9 2.09 2. 4 -- -- 070224 066696 -- -- 2 00 8 9.0..4 9 -- -- 07024 06664 -- -- 70 00 0 7.8 /0.2.78 4 -- -- -- -- 0704 066924 200 9 00 6.7 2/0.4 2.7 -- -- 072024 066979 07204 067006 2 6 00 6. 4/0.6 4 2.9 6 -- -- -- -- 07404 0670 6 66 00 2. 8/0.2 6 2.90 74 -- -- -- -- 07804 06767 70 20 00 4. Campbell recommends the use of Proof Coil or Straight Link Coil Chain for swing set applications. Round Pails - Inco, Double Loop Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated Working Trade Dia. Length Width Load Limit Cat. UPC Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 lb kg Pail Pail ft. 2/0.4 2.7 -- -- 07202 066962 2 6 0 6. Approximate. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 27

chain products Chain Square Pails - Inco, Double Loop Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Plated White Polycoated Yellow Polycoated Working Trade Dia. Length Width Cat. UPC Cat. UPC Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm 02048 02048 02048 lb kg Pail Pail ft..08 2.0 28 - - 07426 848 -- -- -- -- 90 4 70 47 0.9..4 9 - - 07426 8 -- -- -- -- 70 40 4 7.8 2/0.4.7 8 - - 072426 824 -- -- -- -- 2 6 27 0. 2/0.4.7 - - -- -- PA072496 862 PD072496 884 2 6 27 0. Approximate Campbell recommends the use of Proof Coil or Straight Link Coil Chain for swing set applications. Reels - Inco, Double Loop Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Trade Polycoated Mat. Inside Zinc Plated White Yellow Green Red Working Dia. Length Load Limit Cat. UPC Cat. UPC Cat. UPC Cat. UPC Cat. UPC in. mm in. mm 02048 02048 02048 02048 02048 lb kg 4.07 2.00 2 0720427 0649 -- -- -- -- -- -- -- -- 70 2 00 24.0 0.7 2.08 2.0 28 072227 06479 -- -- -- -- -- -- -- -- 90 4 200 4.0. 0.9.08 2.0 28 -- -- PA0722227 880 -- -- -- -- PG0722227 842 90 4 0 0.. 0.9 2.09 2. 4 070227 06602 -- -- -- -- -- -- -- -- 2 20 20.0 0.7 9.0..4 9 072027 06479 -- -- -- -- -- -- -- -- 70 20 2.0 0.7 7.8..4 9 0722627 846 -- -- -- -- -- -- -- -- 70 2.8. 7.8 /0.2.78 4 AW07024 462 -- -- -- -- -- -- -- -- 200 9 00.0. 6.7 2/0.4 2.7 -- -- PA0722027 8 PD0722027 886 PE0722027 846 -- -- 2 6 2 26.8 0.7. 2/0.4 2.7 0722027 826 -- -- -- -- -- -- -- -- 2 6 27.9 0.7. 2/0.4 2.7 0722087 886 -- -- -- -- -- -- -- -- 2 6 60 0.9 0.7. 2/0.4 2.7 -- -- -- -- PD0722087 877 -- -- -- -- 2 6 0 0.9.. /0. 4 2.7 0726427 84444 -- -- -- -- -- -- -- -- 0 8 0 4.2.. 4/0.6 4 2.9 6 0724627 2092 -- -- -- -- -- -- -- -- 6 66 00 28.4 0.7. Campbell recommends the use of Proof Coil or Straight Link Coil Chain for swing set applications. Feet/ Reel Lb/ Reel Reel Width in. Links/ ft. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 28

chain products www.apexhandtools.com/campbell Special Inco Well Chain Uses: General utility; farm and animal; well pipes Standard Material: Low carbon steel, galvanized wire Packaging: Order unit is carton Do not use for overhead lifting Chain Nominal Dimensions (in. and mm) Mat. Inside Dimensions Zinc Coated Working Trade Dia. Length Width Load Limit Cat. UPC Carton Carton/ Links/ in. mm in. mm in. mm 02048 lb kg Feet Lb ft. 2/0.4 2.0 6 - - 0762024 06774 2 6 20 4. Single and Double Jack Chain Single Carton Reel Double Individual chain links shown actual size in reference section page 46. Uses: Fixture and novelty suspension, general utility use not requiring high strength Standard Material: Low carbon steel or brass Standard Finish: Zinc Plated (Z.P.), polycoated and Brass Glo Packaging: 00 foot cartons (order unit is feet ) and on reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Cartons - Single Jack Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Mat. Inside Steel, Zinc Plated Brass, Bright Working Load Limit Trade Dia. Length Cat. UPC Cat. UPC Steel Brass Feet/ Lb/ Links/ in. mm in. mm 02048 02048 lb kg lb kg Carton 00 ft. 6.06 2.0 080624 067402 0864 06787 0 8 4 00 24 4.08 2.6 6 080424 0676 -- -- 6 7 00 4. 9 2..7 9 080224 06727 -- -- 29 20 9 00 8. 6 0.4.9 24 080024 067280 -- -- 4 20 4 00 4 8.6 4.09 28 0800824 0672 -- -- 60 27 4 20 00 2 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 29

chain products Reels - Single Jack Chain (Order Unit is Each Reel ) Chain Nominal Dimensions (in. and mm) Trade Mat. Inside Steel, Zinc Plated Solid Brass, Bright Steel, Brass Glo Black Polycoated Working Load Limit Dia. Length Cat. UPC Cat. UPC Cat. UPC Cat. UPC Steel Brass Feet/ in. mm in. mm 02048 02048 02048 02048 lb kg lb kg Reel 8.0.9 0 AW080827 47 -- -- -- -- -- -- 2 4 2 200. 6.06 2.0 0724027 064920 -- -- -- -- -- -- 0 8 4 20 8. 24 6.06 2.0 -- -- AW0867 479 -- -- -- -- 0 8 4 200 9. 24 4.08 2.6 6 -- -- -- -- -- -- PB0722827 879 6 7 90 0. 9 4.08 2.6 6 AW080427 4698 AW0847 4742 -- -- -- -- 6 7 200 2. 9 2..7 9 080227 0674 -- -- -- -- -- -- 29 20 9 00 4 0.7 6 2..7 9 072727 064746 -- -- 0724022 0649 -- -- 29 20 9 00 9.2 6 2..7 9 AW080227 468 AW0827 47 -- -- -- -- 29 20 9 200 7. 6 0.4.9 24 -- -- -- -- 0724020 064906 -- -- 4 20 4 00. 0.4.9 24 AW080027 4674 -- -- -- -- -- -- 4 20 4 00. Lb/ Reel Reel Width in. Links/ ft. Reels - Double Jack Chain (Order Unit is Each Reel) Nominal Dimensions (in. and mm) Mat. Inside Zinc Plated Brass Glo Working Trade Reel Dia. Length Load Limit Cat. UPC Cat. UPC Feet/ Lb/ Width Links/ in. mm in. mm 02048 02048 lb kg Reel Reel in. Reel 6.06 2.0 072627 064722 072667 06479 200 9. 24 Sash Chain Individual chain links shown actual size in reference section page 46. Carton Reel Uses: Counter-balance chain for double hung window sashes, arc lamp chain, animal chain Standard Material: Low carbon steel or bronze, and also available in stainless steel Standard Finish: Zinc Plated (Z.P.) and Copper Glo Packaging: 00 ft. carton (order unit is feet ) and on reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 0

chain products www.apexhandtools.com/campbell Cartons - Sash Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Stock Inside Zinc Plated Copper Glo Solid Bronze Working Load Limit Trade Thickness Length Cat. UPC Cat. UPC Cat. UPC Steel Bronze Feet/ Lb/ Links/ in. mm in. mm 02048 02048 02048 lb kg lb kg Carton 00 ft. 8.04. 4 0890824 06792 0890844 067976 -- -- 7 4 68 00 4 22 8.04. 4 -- -- 0880844 06792 -- -- 7 4 - - 00 4 22 2.04. 4 08924 06804 089244 06808 -- -- 94 4 80 6 00 22 0.0.9 089024 0689 -- -- 089074 0687 8 7 7 4 00 20.04.9 08924 06820 08944 06822 08974 068249 06 48 00 4 00 6 20 40.04.9 0894024 068287 0894044 06800 0894074 06824 9 2 7 00 7 20 4.0.6 4 089424 06862 -- -- -- -- 7 79 6 74 00 9 2 0.06 2.6 7 089024 06844 -- -- -- -- 22 02 20 9 00 2 This item includes fixtures for 7 double hung sashes. Order unit is box. Weight per box is pounds. s 0, and 40 are also known as sizes 2, and 4 navy chain. Chain Cartons - Sash Chain (Order Unit is Feet ) Nominal Dimensions (in. and mm) Type 04 Working Stock Inside Stainless Steel Load Limit Trade Thickness Length Stainless Steel Cat. UPC Feet/ Lb/ Links/ in. mm in. mm 02048 lb kg Carton 00 ft. 8.04. 4 089804 06860 7 4 00 4 22.04.9 0894 068 7 79 00 6 20 is also known as size navy chain. Reels - Sash Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Stock Inside Zinc Plated Working Reel Trade Thickness Length Cat. UPC Load Limit Feet/ Lb/ Width Links/ in. mm in. mm 02048 lb kg Reel Reel in. ft. 8.04. 4 0890827 067969 7 4 00 20. 22 2.04. 4 089227 06804 94 4 00 2 0.7 22.04.9 08927 06828 06 48 00 0 0.7 20.04.9 072727 064876 06 48 00 7. 20 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

chain products Decorator Chain Chain 4 Reel 0 For hanging plants and lamps, drapery tie-backs Finishes: brass glo, black, antique brass, white, antique copper, antique silver, brushed nickel Available on reels, order unit is each Nominal Dimensions (in. and mm) Mat. Inside Dimensions Trade Dia. Length Width Cat. Working Load Limit UPC Feet/ Lb/ in. mm in. mm in. mm Finish 02048 lb kg Reel Reel 4.20.8 4.7.2. Zinc Plated 0720428 7877 70 2 90 0. 4.20.8 4.7.2. Black Polycoated 0720477 06462 70 2 90 0. 0..4.2 0.7.2.2 Brass Glo 0722000 9084 6 60 0. 0..4.2 0.7.2.2 Black Polycoated 0722002 828 6 40 6.8. 0..4.2 0.7.2.2 Antique Brass 072200 822 6 40 6.8. 0..4.2 0.7.2.2 White Polycoated 0722004 822 6 40 6.8. 0..4.2 0.7.2.2 Antique Copper 0722006 8249 6 40 6.8. 0..4.2 0.7.2.2 Antique Silver 0722007 826 6 40 6.8. 0..4.2 0.7.2.2 Brushed Nickel 072200 226 6 40 6.8. Reel Width in. Hobby/Craft Decorator Chain - Standard Reel s 00 Brass Plated 00 Black Reel Dimpled - Brass Plated See chart at top of next page. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 2

chain products www.apexhandtools.com/campbell Hobby/Craft Decorator Chain - Standard Reel s Reels Stock Inside Dimensions Reel Working Trade Diameter Length Width Cat. UPC Feet/Reel Width Lb/Reel Load Limit in. mm in. mm in. mm 02048 Finish ft. m in. lb kg lb kg 00.087 2.2.6 6.24 6 0707 882 Brass Plated 97 60 4..6 6 00.087 2.2.6 6.24 6 07077 88268 Black 97 60 4..6 6 40.079 2.7 7.20 07407 8847 Dimpled-Brass Plated 97 60 4. 0. 2 40.079 2.7 7.20 074077 88480 Dimpled-Black 97 60 4. 0. 2 40.079 2.7 7.20 0707 88497 Dimpled-White 97 60 4. 0. 2 0.8.4 29. 8. 0707 880 Dimpled-Brass Plated 66 20. 7.4 20 9 0.8.4 29. 8. 07067 22468 Dimpled-Brushed Nickel 66 20. 7.4 20 9 Chain Hobby/Craft Cathedral Chain - Standard Reels Brass Plated Black Reels Stock Inside Dimensions Reel Working Trade Diameter Length Width Cat. UPC Feet/Reel Width Lb/Reel Load Limit in. mm in. mm in. mm 02048 Finish ft. m in. lb kg lb kg.087 2.2.9 24.40 0 077 8874 Brass Plated 98 0 4..9 2.7 20 9.087 2.2.9 24.40 0 0777 888 Black 98 0 4..9 2.7 20 9.087 2.2.9 24.40 0 0787 8898 White 98 0 4..9 2.7 20 9 2.0 2.7.7 40.6 4 0727 884 Brass Plated 66 20 4..9 2.7 6 2.0 2.7.7 40.6 4 07277 88428 Black 66 20 4..9 2.7 6 Hobby/Craft Twist Chain - Mini Reels Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. 90 Brass Plated Reels Stock Inside Dimensions Reel Working Trade Diameter Length Width Cat. UPC Feet/Reel Width Lb/Reel Load Limit in. mm in. mm in. mm 02048 Finish ft. m in. lb kg lb kg 70.04.4..07.8 07707 888 Brass Plated 82 2.2 2.0 2 90.06.4.2..2 07907 8872 Brass Plated 82 2.2 2.90. 2 90.06.4.2..2 079027 8889 Nickel Plated 82 2.2 2.90. 2 200.079 2.40 0.6 4 07207 88282 Brass Plated 49.2 2.0.04 2 200.079 2.40 0.6 4 072027 88299 Nickel Plated 49.2 2.0.04 2 20.099 2.. 8.6 4 0727 882 Brass Plated 0.2 2.7.24 2 20.099 2.. 8.6 4 07277 886 Black 0.2 2.7.24 2 DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

chain products Hobby/Craft Clock Chain - Mini Reels Chain Brass Plated Reels Stock Inside Dimensions Reel Working Trade Diameter Length Width Cat. UPC Feet/Reel Width Lb/Reel Load Limit in. mm in. mm in. mm 02048 Finish ft. m in. lb kg lb kg.04.. 8. 0707 888 Brass Plated 64 0.2.0.68 2.04.. 8. 07027 8890 Nickel Plated 64 0.2.0.68 2.0.. 8. 0707 88206 Brass Plated 82 2.2.0. 0 4 7.06.6.0 7.6. 07077 88220 Brass Plated 82 2.2.0.6 7 Sash Chain Chrome Plated Reels Stock Outside Dimensions Reel Working Trade Diameter Length Width Cat. UPC Feet/Reel Width Lb/Reel Load Limit in. mm in. mm in. mm 02048 Finish ft. m in. lb kg lb kg 2.06.4.8 4.7.20 070227 8876 Chrome Plated 64 0.2.0. 29.020..7 9.27 7 07027 8867 Chrome Plated 82 2.2.60.7 2 Ball Chain 6 Chrome Plated Reels Stock Reel Working Trade Diameter Cat. UPC Shelf Feet/Reel Width Lb/Reel Load Limit in. mm 02048 Finish Pack ft. m in. lb kg lb kg 6.42.6 07627 8849 Chrome Plated -- 64 0.2 2.60.2 6.42.6 0767 47 Brass -- 64 0.2 2.60.2 6 -- -- B0760 67 #6 Ball Chain Connector, Chrome Plated 0 Bags+ -- -- -- -- -- -- -- 6 -- -- B07602 794 #6 Ball Chain Connector, Brass 0 Bags+ -- -- -- -- -- -- -- +6/Bag, 0 Bags/Box Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 4

chain products www.apexhandtools.com/campbell Hobby Chain - Carded Chain C072027 C0707 C0767 Trade Stock Diameter Cat. UPC Shelf Case Feet/Card Working Load Limit Weight /Case in. mm 02048 Finish Pack Pack ft. m lb kg lb kg 200.079 2 C07207 224 #200 Twist Chain, Brass Plated 2 0.0 2 7 7.7 200.079 2 C072027 226 #200 Twist Chain, Nickel Plated 2 0.0 2 7 7.7.0. C0707 220 #6 Ball Chain, Brass Plated 2 4.7 0 4 6 6.42.6 C0767 2229 #6 Ball Chain, Brass Plated with 2 Chain Connectors 2 6.82 2. 6.42.6 C07627 222 #6 Ball Chain, Nickel Plated with 2 Chain Connectors 2 6.82 2. Oval Link Chain Reels Stock Inside Dimensions Reel Working Trade Diameter Length Width Cat. UPC Feet/Reel Width Lb/Reel Load Limit in. mm in. mm in. mm 02048 Finish ft. m in. lb kg lb kg 9.04..20. 0797 8827 Brass Plated 82 2.2.70.8 Plastic Chain Square Pails Reel Used for creating borders for flower beds, gardens, driveways, etc. For decorative non-load bearing use only Comes in three colors: white, yellow, or black. Do not use for overhead lifting, towing or pulling. Square Pails - Plastic Chain (Order Unit is Each Pail ) Nominal Dimensions (in. and mm) Material Inside Dimensions Yellow White Black Trade Diameter Length Width Cat. UPC Cat. UPC Cat. UPC 02048 02048 02048 Feet/Pail Lb/ in. mm in. mm in. mm Pail #6.2 6.0 2.0 8 -- -- 0990646 868 -- -- 220 6 #8.29 7.0 8.40 0 099086 882 0990846 820 099086 8229 8 2 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

chain products Chain Reels - Plastic Chain (Order Unit is Each Reel ) Nominal Dimensions (in. and mm) Material Inside Dimensions Yellow White Black Reel Trade Diameter* Length Width Cat. UPC Cat. UPC Cat. UPC Feet Lb/ Width in. mm in. mm in. mm 02048 02048 02048 /Reel Pail in. #6.2 6.0 2.0 8 -- -- 0990647 87 -- -- 00 7 0.7 #8.0 7.0 8.0 2 099087 899 0990847 822 099087 826 60 0.7 *Since material is not a perfect circle, this figure represents the smallest surface area. Cable and Chain - Plastic Clam Shell Packs Product packaged in clear, see-through plastic clam shells Customer can see product first hand Convenient hang up hole Trade in. 9770 979600 Cat. UPC Working Load Limit Description 02048 lb kg /6 Proof Coil/Zinc Plated 9720 824 800 60 0 6 24 2/0 Passing Link/Zinc Plated 97000 820 40 204 0 7 2/0 Str. Link Coil/Zinc Plated 970 8274 20 26 0 # Inco/Zinc Plated 97702 804 90 4 9 0 # Inco/Zinc Plated 9770 8 70 9 2/0 Inco 97722 8 2 6 6 6 #2 Single Jack/Zinc Plated 978000 842 29 9 2 #0 Decorator Chain/Brass Glo 979600 840 6 0 7 #0 Decorator Chain/Black 97960 840 6 0 8 #0 Decorator Chain/White 97960 844 6 0 8 /2 Coated Cable 97700 87 84 8 0 0.2 /8 Coated Cable 9770 89 40 4 0. /6 Coated Cable 977020 860 840 8 2.6 Feet/ Pack Packs/ Ctn. Lb./ Ctn. NO EXCEDA el límite de carga de trabajo de las cadenas (WLL), cables o componentes. NO UTILIZAR para levantar objetos o para izar. NO UTILIZAR si la cadena, cables o los componentes estan Para visualmente prevenir la distorsionados posibilidad de o una gastados. lesión personal sería: NO QUITAR EXCEDA el revestimiento los límites de de carga plástico de las en cadenas el cable donde o componentes. esten los NO accesorios LA UTILICE concetados. para cargar hacia arriba o para izar. NO El USO LA UTILICE INADECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad. o gastados. DO NOT EXCEED the working load limits (WLL) for chain, cable or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain, cable or components are visibly worn or To distorted. prevent the possibility of serious bodily injury: DO NOT EXCEED the working load limits for chain or components. REMOVE plastic coating from cable where clips, clamps, ferrules DO NOT USE for overhead lifting or hoisting. DO or securing NOT USE hardware if the chain are attached. or components are visibly distorted or worn. MISUSE can result in serious bodily injury or property damage. 6

chain products www.apexhandtools.com/campbell Cable and Wire Rope Cross Section Flexible 7 x 7 Cross Section Extra Flexible 7 x 9 Chain Campbell s cable is either 7x7 or extra flexible 7x9 construction as illustrated * * 700097 Green vinyl coated cable is x7 Iron Wire construction, which enables bending and shaping of cable High strength cable with a galvanized finish; also available in Type 6 Stainless Steel Vinyl coated cable is more resistant to abrasion and weathering, and can be cleaned easily Campbell s Wire Rope is 6x9 fiber core construction and treated with a rust prohibiting oil With Reel Working Cat. UPC Type Ft. Coating Width Lb./ Load Limit 02048 in. mm Const. /Reel in. mm in. Reel lb kg Cable - Uncoated, Galvanized 7000227 002 6 7 x 7 00 - -. 96 44 700027 00260 2 2 7 x 7 00 - -. 4 8 8 7000427 00284 8 7 x 7 00 - -. 6 40 4 7000627 0007 6 7 x 9 20 - -. 8 840 8 7000827 002 4 8 7 x 9 20 - -. 26 400 6 7000927 8946 6 8 7 x 9 200 - -. 960 889 Cable - Vinyl Coated 700097 00277 2 2 7 x 7 20 6 4.6. 7 4 84 8 7000497 0029 8 7 x 7 20 6 4.6. 0 40 4 7000697 004 6 7 x 9 20 4 6.4. 20 2 840 8 7000897 008 4 6 7 x 9 200 6 7.9. 27 400 6 70097 004 2 2 7 x 7 00 6 4.6. 6 84 8 700497 002 8 7 x 7 00 6 4.6. 20 40 4 Cable - Coated Green 700097 8946 6 x 7 20 8. 28 Cable - Stainless Steel 7000426 907 8 7 x 7 20 - -. 7.2 40 4 7000626 9088 6 7 x 9 20 - -. 6 740 6 7000826 909 4 6 7 x 9 20 - -. 26 280 80 Wire Rope - Uncoated 7008027 90902 4 6 6 x 9 00 - - 6 040 472 7008227 9099 6 8 6 x 9 00 - - 6 82 700 77 700827 90926 8 0 6 x 9 20 - - 6 8 2400 089 7008427 909 2 6 x 9 20 - - 6 0 4280 97 NO EXCEDA el límite de carga de trabajo de las cadenas (WLL), cables o componentes. NO UTILIZAR para levantar objetos o para izar. NO UTILIZAR si la cadena, cables o los componentes estan Para visualmente prevenir la distorsionados posibilidad de o una gastados. lesión personal sería: NO QUITAR EXCEDA el revestimiento los límites de de carga plástico de las en el cadenas cable donde o componentes. esten los NO accesorios LA UTILICE concetados. para cargar hacia arriba o para izar. NO El USO LA UTILICE INADECUADO si la cadena puede o resultar los componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad. o gastados. DO NOT EXCEED the working load limits (WLL) for chain, cable or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain, cable or components are visibly worn or distorted. DO NOT EXCEED the working load limits for chain or components. DO REMOVE NOT USE plastic for coating overhead from lifting cable or hoisting. where clips, clamps, ferrules DO or securing NOT USE hardware if the chain are attached. or components are visibly distorted or worn. MISUSE can result in serious bodily injury or property damage. 7

chain products Chain Construction Chain Uses: General-purpose chain primarily used in telecommunications industry for tying, binding and pulling; outside the plant Standard Material: BBB chain Standard Finish: Self Colored (S.C.) Packaging: Order unit is each Do not use for overhead lifting Cat. UPC Weight Each Working Load Limit 02048 in. x ft. mm x m lb kg lb kg 020 7840 6 x 4 8 x. 4 6 700 77 Binder Chains A complete line of tie down chains All chains listed may be used in accordance with the latest D.O.T. regulations You may choose either System 4 chain with a Bright finish, or yellow chromated zinc electroplated System 7 chain with higher load-to-weight ratios All binders have a forged heat treated clevis grab hook on each end Do not use for overhead lifting System 4 - Binder Chains With Clevis Grab Hooks Weight Working Cat. UPC Std. Each Load Limit in. x ft mm x m 02048 Pkg. m kg 6 x 20 8 x 6. 02266 0999 2 2 9 900 770 6 x 2 8 x 7.6 022662 060007 2 26 2 900 770 8 x 2 0 x.7 02222 749 2 22 0 400 240 8 x 4 0 x 4. 022262 74 2 2 400 240 8 x 6 0 x 4.9 022272 7477 20 28 400 240 8 x 20 0 x 6. 022292 7444 20 4 400 240 8 x 2 0 x 7.6 02202 7448 20 40 8 400 240 System 4 - Binder Chains, Packed per Bag With Clevis Grab Hooks Weight Working Cat. UPC Std. Each Load Limit in. x ft mm x m 02048 Pkg. m kg 8 x 6 0 x 4.9 T022272 6067 /Bag 28 400 240 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 8

chain products www.apexhandtools.com/campbell System 7 - Binder Chains With Clevis Grab Hooks Weight Working Cat. UPC Std. Each Load Limit in. x ft mm x m 02048 Pkg. lb kg lb kg 6 x 4 8 x 4. 07 7462 2 7 8 4700 20 6 x 6 8 x 4.9 072 7479 2 9 9 4700 20 6 x 20 8 x 6. 074 749 2 2 0 4700 20 6 x 2 8 x 7.6 07 74209 2 28 4700 20 8 x 4 0 x 4. 068 06428 2 2 6600 2990 8 x 6 0 x 4.9 0660 064 2 28 6600 2990 8 x 20 0 x 6. 066 0649 20 4 6600 2990 8 x 2 0 x 7.6 0667 06466 20 4 9 6600 2990 2 x 20 x 6. 076 78788 0 4 2,00 0 Chain Log Chains Made from System chain with grab hook one end, slip hook other end Self Colored finish Packed one 4 ft. length in a bag; 2 bags per box Order unit is each Trade Mat. Cat. UPC Pounds Working Load Limit in. mm in. mm 02048 Each lb kg 6 8.2 8 0040 06884 6 900 860 8 0.9 0 000 0689 2 260 200 Product packaged in clear, see-through plastic clam shells Eye Slip Hooks swaged on each end Used for towing, logging Galvanized cable Tow Cable Working Shelf Pack Cat. UPC Load Limit Qty. Pkg. Wgt. 02048 in. x ft. mm x m Description lb lb kg 977920 204 6 20 8 6 Cable with Slip Hooks at Each End 6 960 890 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 9

chain products Tow Chains Chain Campbell tow chains are available in System 4, or System 7 All have forged clevis hooks Tow chains are subject to shock loading and must be inspected frequently They must be taken out of service when damaged Select the right chain for the job according to the working load limits Order unit is each Do not use for overhead lifting Cat. UPC 02048 System 7 Tow Chains 078 7794 High Test Tow Chains 0292 8768 0296 8876 Working Load Limit in. x ft. mm x m Description Standard Finish Packaging Lb. Each lb kg 6 20 8 6. System 7 chain, clevis hooks Yellow Chromate /Bag 24 4700 20 6 2 8.6 System 4 chain, clevis hooks High Visibility Orange /Bag 4 900 769 6 6 8 4.9 System 4 chain, clevis hooks High Visibility Orange /Bag 8 900 769 Winch Line Chains Made from Alloy chain and used with wire rope when wrapping is required to lift, pull or skid Special hook is designed to minimize fraying of wire rope to which it is attached Proof tested Order unit is each Alloy Length Working Load Limit Trade Cat. UPC Cat. UPC Minus Hook Pounds Alloy in. mm 02048 02048 in. Each lb kg 4 20 -- -- 2029 068706 8 2 2,000 0,00 7 8 22 -- -- 2049 0687 24 24 4,200,00 26 -- -- 2069 068720 24 27 8,700 7,600 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 40

chain products www.apexhandtools.com/campbell Pet Tie-Outs Product packaged in clear, see-through plastic clam shells One chain or cable per clam shell Tie-out cables are red vinyl coated over galvanized cable 7 Tie-Out Kit includes: 2 screw hooks, tension spring, pulley, 2 pulley stops, thimble and 2 wire rope clips, 0 dog tie-out cable w/swivel bolt snaps Chain 29907 970820 97087 Weight/ Shelf Pack Working Load Limit Cat. UPC Chain/Cable Length Shelf Pack 02048 Description ft. m Qty. lb lb kg 29907 2690 Large Dog Chain Tie-out w/swivel Snaps 2/0 4.6 6 20 26 970820 2078 20 Cable Pet Tie-out w/swivel Snaps /8 20 6.0 4.2 0 68 97087 208 7 Cable Tie-out Kit /8 7 2 4.8 0 68 NO EXCEDA el límite de carga de trabajo de las cadenas (WLL), DO NOT EXCEED the working load limits (WLL) for chain, cable or cables o componentes. components. NO UTILIZAR para levantar objetos o para izar. DO NOT USE for overhead lifting or hoisting. NO UTILIZAR si la cadena, cables o los componentes estan DO NOT USE if the chain, cable or components are visibly worn or visualmente distorsionados o gastados. distorted. NO UTILIZAR este producto con un collar que pueda sofocar. DO NOT USE this product with a choker type collar. QUITAR el revestimiento de plástico en el cable donde esten los REMOVE plastic coating from cable where clips, clamps, ferrules accesorios concetados. or securing hardware are attached. Inspeccionar simpre antes de usar. Ajustar si es necesario. Inspect the Dog Run before every use for wear and proper operation. Periódicamente, rebisar y ajustar el cierre. Reemplazar la unidad Adjust hardware as necessary. Periodically check and retighten en caso de que alguna de las partes este desgastada. clamp nuts. Replace entire unit if any parts are worn. Nunca ate sa u perro cerca de algún lugar donde pueda quedar Never tie your dog near any object that can cause the dog to become suspendido en el aire. Simpre asegures de que tiene suficiente suspended or entangled. Always provide sufficient shade and water. agua y sombra. Keep your arms and legs clear of the cable when connecting your Asegurese de que el cable no esta enrollado en sus piernas o dog to the cable in case the dog lunges. Para brazos prevenir cuando la posibilidad se lo ponga de a una su perro. lesión personal sería: To To prevent avoid injuring the possibility your dog, of maintain serious bodily constant injury: observation while your Para NO EXCEDA prevenir que los límites su perro de pueda carga herirse, de las cadenas no lo deje o componentes. desatendido dog DO NOT is tied. EXCEED the working load limits for chain or components. cuando NO LA UTILICE este atado. para cargar hacia arriba o para izar. Not DO NOT all dogs USE can for be overhead safely tied lifting out. or Your hoisting. supervision and good No NO todos LA UTILICE los perros si la puede cadena ser o amarrados los componentes de forma están segura. visualmente Su judgement DO NOT USE are if required. the chain or components are visibly distorted or supervisión distorsionados es necesaria. o gastados. worn. 4

chain products Dog Runner and Kennel Chains Chain Inco chain with Zinc finish and swivel snaps each end One chain per clam shell pack Wt. per Shelf Pack Working Cat. UPC Chain Chain Length 00 Pieces Clam Shells Load Limit 02048 ft. m lb kg Per Box lb kg 2904 70 2 4.7 2 7 80 6 2907 7079 2/0 4.7 20 4 6 20 4 2904 Tie-Out Chains Inco chain with ring and swivel snaps on opposite ends, swivel in center One chain per clam shell pack Wt. per Shelf Pack Working Cat. UPC Chain Chain Length 00 Pieces Clam Shells Load Limit 02048 ft. m lb kg Per Box lb kg 20907 709 2/0 20 6.09 2 48 20 4 20907 NO EXCEDA el límite de carga de trabajo de las cadenas (WLL), DO NOT EXCEED the working load limits (WLL) for chain, cable or cables o componentes. components. NO UTILIZAR para levantar objetos o para izar. DO NOT USE for overhead lifting or hoisting. NO UTILIZAR si la cadena, cables o los componentes estan DO NOT USE if the chain, cable or components are visibly worn or visualmente distorsionados o gastados. distorted. NO UTILIZAR este producto con un collar que pueda sofocar. DO NOT USE this product with a choker type collar. QUITAR el revestimiento de plástico en el cable donde esten los REMOVE plastic coating from cable where clips, clamps, ferrules accesorios concetados. or securing hardware are attached. Inspeccionar simpre antes de usar. Ajustar si es necesario. Inspect the Dog Run before every use for wear and proper operation. Periódicamente, rebisar y ajustar el cierre. Reemplazar la unidad Adjust hardware as necessary. Periodically check and retighten en caso de que alguna de las partes este desgastada. clamp nuts. Replace entire unit if any parts are worn. Nunca ate sa u perro cerca de algún lugar donde pueda quedar Never tie your dog near any object that can cause the dog to become suspendido en el aire. Simpre asegures de que tiene suficiente suspended or entangled. Always provide sufficient shade and water. agua y sombra. Keep your arms and legs clear of the cable when connecting your Asegurese de que el cable no esta enrollado en sus piernas o dog to the cable in case the dog lunges. Para brazos prevenir cuando la posibilidad se lo ponga de a una su perro. lesión personal sería: To To prevent avoid injuring the possibility your dog, of serious maintain bodily constant injury: observation while your NO Para EXCEDA prevenir los que límites su perro de pueda carga de herirse, las cadenas no lo deje o componentes. desatendido dog DO NOT is tied. EXCEED the working load limits for chain or components. NO cuando LA UTILICE este atado. para cargar hacia arriba o para izar. Not DO NOT all dogs USE can for be overhead safely tied lifting out. or Your hoisting. supervision and good NO No todos LA UTILICE los perros si la puede cadena ser o amarrados los componentes de forma están segura. visualmente Su judgement DO NOT USE are if required. the chain or components are visibly distorted or distorsionados supervisión es o necesaria. gastados. worn. 42

chain products www.apexhandtools.com/campbell Porch Swing Chain Assembly with Hooks Porch Swing Chain Set For securing porch swings to porch ceilings One pair per clam shell pack Chain Cat. UPC Wt. per Shelf Pack Working Load Limit 02048 lb kg Shelf Pack lb kg 0702024 06462 6.7. 00* 227* *The WLL is 00lb / 227kg per pair Cat. UPC 02048 Weight Ea. Description Capacity lb kg 70849 477 Hydraulic Chain Cutter 8 High Test 4 7089 7820 Hydraulic Chain Cutter #80 8 Alloy 2 High Test 8 4 M70879 208799 Cam-action Weldless Chain Cutter All Weldless 2 7099 07 Ratchet Welded Chain Cutter 8 Proof Coil 9 4 M708494 208294 Hydraulic Cutter Guard Kit --.4 Chain and Cable Cutters Cat. UPC Weight Ea. 070 Description Capacity lb kg 0690TN 9 Cable Cutter 4 Cable. M70879 7099 0690TN 70849 7089 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 4

chain products Straight Link Machine Chain Product Shown Actual Chain 4 2 /0 2/0 /0 4/0 /0 Twist Link Machine Chain-Product Shown Actual 4 2 /0 2/0 4/0 /0 Straight Link Coil Chain-Product Shown Actual 4 2 /0 2/0 /0 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. 4/0 /0 DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 44

chain products www.apexhandtools.com/campbell Twist Link Coil Chain-Product Shown Actual Chain Passing Link Chain-Product Shown Actual Lock Link, Single Loop Chain-Product Shown Actual 2/0 4/0 2 /0 2/0 /0 4/0 /0 Inco, Double Loop Chain-Product Shown Actual 4 2 /0 2/0 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. 4/0 DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 8/0 4

reference chain products section Jack Chain-Product Shown Actual Chain 8 6 4 2 0 8 Sash Chain-Product Shown Actual 8 2 0 40 4 0 Front View Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 46

chain products index www.apexhandtools.com/campbell Cat. Page Cat. Page Cat. Page Cat. Page 020202... 6 08082... 0 02022... 6 08082... 0 02000... 6 0802... 0 02002... 6 0802... 0 02022... 6 08092... 0200... 6 0822... 0 0202... 6 084... 0 020400... 6 0842... 0 020402... 6 08... 0 020422... 6 082... 0 02040... 6 086... 0 02042... 6 0862... 0 02000... 6 08446... 02002... 6 08446... 02022... 6 0846... 0200... 6 0846... 0202... 6 08466... 020600... 6 08466... 020602... 6 090424... 7 020622... 6 0924... 7 02060... 6 0927... 7 02062... 6 0929... 7 02072... 6 09... 7 020802... 6 09... 7 020822... 6 02006... 8 02082... 6 020... 8 02002... 6 02222... 8 0202... 6 022262... 8 02202... 6 022272... 8 0222... 6 022292... 8 02802... 8 02202... 8 0282... 8 02266... 8 028202... 8 022662... 8 02822... 8 0292... 40 02802... 8 0296... 40 0282... 8 004024... 2 02842... 8 00926... 24 0292... 9 0024... 8 02942... 9 00224... 8 0292... 9 0024... 8 02962... 9 00424... 8 0402... 7 0024... 8 040... 7 0204... 8 04042... 7 02024... 8 0404... 7 0024... 8 0402... 7 04024... 8 040... 7 004... 8 04062... 7 0024... 8 0406... 7 02024... 9 04082... 7 020224... 9 04226... 7 02024... 9 0426... 7 02024... 9 0426... 7 02204... 9 046... 7 022026... 20 04426... 7 024024... 9 0446... 7 0204... 9 0426... 7 02900... 9 046... 7 0024... 20 04626... 7 0026... 2 0466... 7 00224... 20 00902... 9 0024... 20 08042... 0 00424... 20 080422... 0 0024... 20 08042... 0 0026... 2 Para prevenir la posibilidad de una lesión personal sería: 0802... 0 0202... 2 NO EXCEDA los límites de carga de las cadenas o componentes. 0802... NO LA UTILICE para cargar 0hacia arriba 02024... o para izar. 20 08062... NO LA UTILICE si la cadena 0 o los componentes 02426... están visualmente 2 08062... distorsionados o gastados. 0 0024... 20 04024... 20 072027... 0024... 20 0727... 0026... 2 07277... 060... 22 07027... 4 09626... 24 077... 04024... 22 0777... 04002... 6 0787... 04002... 6 0727... 04062... 6 07277... 040202... 6 0767... 4 04022... 6 07627... 4 04042... 6 07407... 0402... 6 074077... 04062... 6 074087... 04072... 6 0707... 04082... 6 07067... 040682... 2 07707... 04072... 2 07907... 040762... 2 079027... 040772... 2 072027... 28 0040... 0720427... 28 0042... 0720428... 2 004... 4 0720477... 2 00426... 4 072627... 0 000... 072667... 0 002... 072727... 0 00... 4 0722000... 2 0026... 4 0722002... 2 0060... 072200... 2 0062... 0722004... 2 006... 4 0722006... 2 00626... 4 0722007... 2 0072... 072200... 2 0080... 0722027... 28 0082... 0722087... 28 07... 9 072227... 8 072... 9 0722227... 8 074... 9 072227... 8 07... 9 0722427... 2 078... 40 072227... 9 068... 9 0722627... 28 0660... 9 0722827... 2 066... 9 0722927... 2 0667... 9 072297... 2 076... 9 07267... 2 0462... 4 07269... 24 0472... 4 072227... 28 0482... 4 07267... 8 0492... 4 07288... 9 06... 072427... 2 066... 072627... 2 068... 072727... 02062... 07287... 26 02082... 0724020... 0 0202... 0724022... 0 062... 7 0724027... 0 06... 7 072427... 2 0690TN... 4 0724627... 28 0702024... 4 072027... 8 070227... 4 0726427... 28 0707... 4 0726627... 9 07027... 4 0726727... 8 0707... 4 0726827... 2 07077... 4 0740224... 2 0707... 074024... 2 DO NOT EXCEED the working load limits for chain or components. DO 07077... NOT USE for overhead lifting or 074027... hoisting. 2 DO 0797... NOT USE if the chain or components 074024... are visibly distorted or 2 worn. 07207... 074027... 2 Chain 47

chain chain products index Cat. Page Cat. Page Cat. Page Cat. Page Chain 07404... 2 000... 9 07407... 2 2029... 40 0742024... 2 2049... 40 074204... 2 2069... 40 074024... 2 2904... 42 0744024... 2 2907... 42 0744027... 2 29907... 4 074404... 2 20907... 42 074407... 2 970820... 4 074024... 2 97087... 4 07404... 2 9720... 6 07407... 2 97000... 6 07024... 27 970... 6 070224... 27 97700... 6 070227... 28 9770... 6 07024... 27 977020... 6 0704... 27 97702... 6 070424... 27 9770... 6 07024... 27 97722... 6 0704... 27 977920... 9 07202... 27 978000... 6 072024... 27 979600... 6 07204... 27 97960... 6 072426... 28 97960... 6 07404... 27 700097... 7 07426... 28 7000227... 7 07426... 28 700027... 7 07804... 27 700097... 7 0762024... 29 7000426... 7 0800824... 29 7000427... 7 080024... 29 7000497... 7 080224... 29 7000626... 7 080227... 0 7000627... 7 080424... 29 7000697... 7 080624... 29 7000826... 7 0864... 29 7000827... 7 08704... 26 7000897... 7 08704... 26 7000927... 7 087204... 26 70097... 7 0880844... 700497... 7 0890824... 7008027... 7 0890827... 7008227... 7 0890844... 700827... 7 089224... 7008427... 7 089227... 70849... 4 089244... 7089... 4 089024... 7099... 4 089074... AW00427... 8 08924... AW020427... 9 08927... AW00427... 2 08944... AW07024... 28 08974... AW080027... 0 0894024... AW080227... 0 0894044... AW080427... 0 0894074... AW080827... 0 089424... AW0827... 0 089024... AW0847... 0 0894... AW0867... 0 089804... B0760... 4 0990646... B07602... 4 0990647... 6 C0707... 099086... C07207... 099087... 6 C072027... Para 0990846... prevenir la posibilidad de una lesión C0767... personal sería: 0990847... NO EXCEDA los límites de 6 carga de C07627... las cadenas o componentes. 099086... NO LA UTILICE para cargar hacia arriba HV04226... o para izar. 7 099087... NO LA UTILICE si la cadena 6 o los componentes HV08426... están visualmente 0040... distorsionados o gastados. 9 M708494... 4 M70879... 4 PA0722027... 28 PA0722227... 28 PA072496... 28 PB0722827... 0 PD0722027... 28 PD0722087... 28 PD072227... 8 PD0722627... 2 PD072027... 8 PD072496... 28 PE0722027... 28 PG0722227... 28 PS02027... 2 T022272... 8 DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 48

Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

Campbell Accessories Table of Contents Campbell began manufacturing harness hardware of malleable iron in 87. Over the years, Campbell has added an extensive line of snaps made from malleable iron, steel, zinc, bronze, stainless steel, and aluminum. Campbell also offers a broad line of accessories to complement our chain and cable products, as well as products for use on synthetic webbing and rope. Accessories Contents Page Lap Links Load Binders 2 Animal Accessories 68 Cable Pullers 70 Clevises, Double 4 Clevises, Twisted and Straight Cold Shuts Dees 67 Ferrules and Stops 69 Gatehook 62 Hitch Pins 4 Hooks, Grab 7, 7 Hooks, S 7, 76 Hooks, Slip 74 Hooks, Swag 7 Links, Quick and Spring 6 Links, Quick and Spring, Stainless Steel 64 Loops, footman 68 Net Links, Seven Seas 6 Overview, Uses and Cautions Pulleys 6 Pulleys, Heavy Duty 66 Reference Section 76 Rings (Imported) 67 Rings, Welded Rings, Seven Seas, Welded 6 Rope Accessories 66 Rope Clips and Thimbles 69-70 Shackles, Anchor, Screw Pin 7 Shackles, Anchor, Screw Pin, Stainless 72 Snaps, Die Cast Zinc 60 Snaps, Malleable Iron and Steel 8-9 Snaps, Solid Bronze 6 Snap, Spring, Aluminum 64 Snaps, Stainless Steel (#6) 62 Swaging Tool 68 Swivels, Double Round Eye 6 Swivels, Eye and Eye 72 Swivels, Open Eye 6 Campbell Accessories Numerical Index 77-78 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. The Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 900. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 0

accessories www.apexhandtools.com/campbell Warnings, Cautions, Inspection and Proper Use of Accessories Certain precautions and standards of treatment should be observed when using Campbell accessories. Proper care will extend the useful life of the product. SNAPS,PULLEYS, QUICK AND SPRING LINKS, RINGS AND SWIVELS Campbell offers a full line of snap products made from a variety of materials to meet the needs of many applications. These products are designed and intended for light duty applications. Typical and appropriate uses would include pet leashes, ancillary saddlery and tack, hanging plants, flagpoles, tarp covers, key rings, gate closures, luggage and shoulder bag straps. Snaps are not to be used for overhead lifting, to support human weight, for playground or athletic equipment, or as safety devices. S AND CAUTIONS: The use of accessories is subject to certain hazards that cannot be met by mechanical or manufacturing means, but only by the exercise of intelligence, care, and common sense. Do not exceed the working load limit of the accessory. Chemically active environments may adversely affect accessories. Do not use in highly acidic or caustic environments. Campbell should be contacted if the accessory will be exposed to chemically active environments during use. High and low temperatures will affect accessories. Campbell should be contacted if temperatures below -20 F (-29 C) or above 200 F (9 C) will be experienced. Accessories, such as load binders, used in certain applications are subject to governmental regulations. Please follow all Federal, State and/or Local Department of Transportation, OSHA, or other applicable standards and regulations when using Campbell products. Never field weld or repair accessories. See other specific information under the Inspection and Proper Use sections. INSPECTION Regular inspections should be conducted on accessories to detect damage or deterioration from use. The accessory should be inspected for any of the below conditions. If present, the accessory should immediately be removed from service. Cracks. Para prevenir la posibilidad de una lesión personal sería: Excessive nicks or gouges. NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. Excessive wear. The accessory should be removed from service if any dimension is worn more than 0% from the original dimension. Stretched, bent, twisted, or distorted parts. Excessive corrosion. Evidence of heat damage. Evidence of field welding. Any other condition which questions the integrity of the accessory. PROPER USE To protect the users and to prevent damage to the accessories, the following safe practices should be followed: Select the accessory suitable for the application and environment. Avoid shock loading. Avoid bending over sharp edges or corners. Avoid twisting. Follow the assembly instructions and cautions and warning on the product packaging. Purchasers please note that all Warnings and Cautions apply to accessories as well as all chain, components and fittings. Purchasers are responsible for conveying the Warnings and Cautions including the Inspection and Proper Use section information to the end user. Campbell denies any liability for damage that results from use in excess of the working load limit or any abuse or misuse of the product. Any questions concerning the use of Campbell products may be directed to your Apex Tool Group Sales Representative or Customer Service. NOTICE: The product specifications and dimensions are as accurate as possible at the time of printing. However, because we are continually improving the quality and design of our products, they can change without notice. The dimensions and weights are approximate nominal values, and some variation will occur. If specific dimensional requirements are necessary for the application, please contact your Apex Tool Group Sales Representative or Customer Service. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Accessories

load binders Load Binders Uses: To tighten chain, typically for cargo securement. Meets U.S. D.O.T. 9.00-9.02 requirements for use with chain Accessories 62060, 62020, 620604, 62060 Lever Type 620704, 620780, 620780 Ratchet Type Lever Type: Allows for quicker application of load Ratchet Type: Allows for easier adjustment of tension and greater range of take-up Cat. UPC 02048 For Chain & Type Take-Up Lb Working Load Limit in. mm System Description Packaging in. mm Each lb kg 62020 7868 4 7 Sys. & 4 Doub. Swivel 4/ctn. 2 4 70 2600 79 Lever, Red, Imported 62060 08644 6 8 Sys. 7 Doub. Swivel 4/ctn. 4 2 4 8 2 400 240 8 0 Sys. 4 Lever, Red, Domestic 620604 08762 6 8 Sys. 7 Doub. Swivel 4/ctn. 4 2 4 8 2 400 240 8 0 Sys. 4 Lever, Red, Imported 62060 90247 8 0 Sys. 7 Lever Load Binder, Bulk 4 2 4 8 2 9200 470 2 Sys. 4 Domestic 620704 086472 6 8 Sys. 7 Ratchet, Red Bulk 8 20 9 2 400 240 8 0 Sys. 4 Imported 620780 8942 8 0 Sys. 7 Ratchet, Bulk 8 20 0 9200 470 2 Sys. 4 Imported 620780 086489 8 0 Sys. 7 Ratchet, Red Bulk 8 20 0 9200 470 2 Sys. 4 Domestic Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 2

repair links, cold shuts www.apexhandtools.com/campbell Repair and Lap Links Uses: Connections for chain and attachments. Chain is inserted, then link is hammered closed Standard Material: Low carbon steel Standard Finish: Zinc plate Packaging: Order unit is each or bag ; all bags are packaged 0 per box Do not use for overhead lifting Zinc Plate Trade Boxed Bagged Tagged Packaging in. x in. mm x mm Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Per Box Per Bag Shelf Pk Tagged Weight Per 00 Working Load Limit lb kg lb kg 8 x 4 x 9 - - - - T90024 92807 - - 0 8 2 6 6 x x 26 80024 0807 B9024 640 T9024 9262 00 6 0 4 240 09 Accessories 4 x 4 6 x 2 80024 086 B9024 67 T9024 929 0 4 0 6 4 400 8 4 x 2 6 x 800624 08286 - - - - 0 - - 9 4 4 400 8 6 x 2 8 x 8 800724 080 B90724 67 T90724 92609 0 2 0 6 700 4 8 x 8 9 x 4 800924 08422 B90924 688 T90924 9266 0 2 0 2 0 20 67 8 x 2 9 x 80024 08484 - - - - 0 - - 26 2 20 67 2 x 2 2 x 64 8024 082 - - - - 2 - - 24 22 964 8 x 2 2 6 x 64 8024* 084 - - - - 2 - - 8 27 000 44 Side open. *Bright Finish Uses: Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye, and peen the extended end to prevent opening Standard Material: Mild steel Standard Finish: Blu-Krome (B.K.) Packaging: Order unit is each Note: Cold shuts should not be reused after closure has been made Do not use for overhead lifting Cold Shuts Blu-Krome Inside Length Inside Width Weight Working Trade Closed Closed per 00 Load Limit Cat. UPC in. mm 02048 in. mm in. mm Packed lb kg lb kg 6 T490024 808 6 24 2 9 0/Box 400 80 4 7 T4900424 802 6 0 8 0 0/Box 6 800 6 6 8 T490024 20448 8 7 6 0/Box 0 00 80 8 0 T4900624 204 2 8 8 6 0/Box 8 8 900 860 2 T4900824 20462 7 8 48 4 9 0/Box 8 7 700 680 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

clevises, hitch pins Double Clevises Forged steel For use with Proof Coil or High Test chain Standard Finish: Galvanized to ASTM A- specifications or Zinc plate finish Order unit is each Accessories Zinc Plate, Bulk Galvanized, Bulk Dimensions For Chain Cat. UPC Cat. UPC A B C D Pieces Weight Working 02048 02048 Per Per Box Load Limit in. mm x in. mm in. mm in. mm in. mm in. mm Box lb kg lb kg 4 7 6 8 T4200 94 6400 7978 7 6 6 27 2 2 64 8 0 0 2 900 769 8 0 - - T420 94 640 798 2 6 2 27 2 72 7 6 0 6 400 2449 7 6 0 2 T4202 204869 6402 7992 8 6 8 4 8 92 9 6 4 6 9200 47 Hitch Pins Drop forged and zinc plate with yellow chromate, and with clips Order unit is each Cat. UPC Weight in. x in. mm x mm 02048 Packed lb kg 8 x 4 6 x 02 T899720 2092 4 /Box 0.6 0. 8 x 6 6 x 2 T89972 20990 4 /Box 0.8 0.4 4 x 4 4 9 x 08 T899728 20969 4 /Box.0 0. 4 x 6 4 9 x 9 T899760 200 4 /Box. 0. 7 8 x 4 4 22 x 08 T89976 20976 2 /Box.2 0.7 7 8 x 6 2 22 x 6 T899768 200 2 /Box. 0.7 x 4 4 26 x 20 T899744 2098 2 /Box.6 0.7 x 6 4 26 x 7 T899776 2027 2 /Box 2..0 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 4

clevises and welded rings www.apexhandtools.com/campbell Twisted and Straight Clevises Forged steel Order unit is each Cat. UPC 02048 Body Dia. Pin Dia. Working load Limit Weight Standard Packaging in. mm in. mm Description lb kg lb kg T8999 2768 7 8 22 4 9 Twisted Clevis, Short Body 6000 728 T89990 277 7 8 22 4 9 Straight Clevis, Short Body 6000 728 T89999 2782 7 8 22 4 9 Twisted Clevis, Long Body 6000 728 4 2 2 T89996 2799 7 8 22 4 9 Straight Clevis, Long Body 6000 728 4 2 2 Accessories Welded Rings Made of low carbon material for general chain attachment May also be used with cable or rope Order unit is each Do not use for overhead lifting Bright Blu-Krome Pieces Weight Working Wire Inside Dia. Cat. UPC Cat. UPC Per Per 00 Load Limit in. mm in. mm 02048 02048 Carton lb kg lb kg 6 4 2 6004 088 60024 082 2 200 9 6 2 6024 08860 -- -- 2 2 0 68 4 7 2 8 60044 086 600424 0870 2 8 4 40 204 4 7 2 8 60244 0894 -- -- 2 0 0 9 6 8 2 6004 08600 -- -- 2 6 7 600 272 8 0 2 60064 086 600624 08679 2 2 900 408 8 0 7 6064 08464 -- -- 2 700 8 8 0 4 02 60464 0849 -- -- 2 4 9 420 88 2 2 2 64 60284 084027 -- -- 0 60 27 400 6 2 7 6084 084270 60824 084294 0 78 00 90 8 6 4 02 6004 08747 -- -- 0 4 66 700 77 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

welded rings, net links & swivels Seven Seas Welded Rings Made of low carbon steel Order unit is pound For dredge nets Do not use for overhead lifting Accessories Bright Wire Inside Dia. Weight Per Working Cat. UPC Pounds 00 Pieces Load Limit 02048 Per in. mm in. mm Pail lb kg lb kg 4 7 2 8 60248 0898 0 0 0 9 8 0 4 02 60468 77064 0 44 20 420 88 ** 7 6 2 89 60888 842 0 24 -- -- ** Case Hardened Seven Seas Net Links Shaped to facilitate uniform closing Links are heat treated to develop the hardness and strength required for deep sea scallop dredging Order unit is pound Trade Wire Inside Length Cat. UPC No Weight Per 000 Pcs. Description in. mm in. mm 02048 lb kg 79 #79 Net link, Heat Treated 8 0 8 29 600898 08440 29 8 79-S #79 Short Net link, Heat Treated 8 0 2 60898 8948 00 4 Open Eye Swivels Number Proper closure Cat. UPC 02048 For Inco Chain Used to couple weldless chain, prevents tangling Eyes easily closed with hammer Zinc plated finish Order unit is each Weight Per 00 Pieces Working Load Limit lb kg lb kg 020 T90024 9282 /0 & 2/0 4.0 2 00 4 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 6

s hooks & swag hooks www.apexhandtools.com/campbell S Hooks Uses: For attaching accessories to chain. After engaging chain, close the S hook as shown to prevent disengagement Standard Material: Low carbon steel Standard Finish: Bright (BRT), Blu-Krome (B.K.) Packaging: Packaged 0 per carton or 6 per bag (except #20, 2 per bag) (0 bags per carton). Order unit is each or box Do not use for overhead lifting See reference section page 78, for actual sizes. Accessories Proper closure 60 Trade Bright Blu-Krome Weight Per Wire Inside Boxed Boxed Bagged 00 Pieces in. mm in. mm Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Working Load Limit lb kg lb kg 20.080 2.0 27 2 2 - - 602024 08486 B92024 2278 6. 6 7 2.080 2.0 6 7 - - 60224 084874 - - /4. 6 7 40.4.40 26 - - 604024 0849 B94024 484. 42 9 60.87 4.74 6 46 - - 606024 084980 B96024 480 2 2 6 6.204.8 8 4 - - 60624 08048 - - 7 8 2 20 4 62.7 4.44 8 - - 606224 08086 - - 2 2 60 27 70.29.6 6 46 60704 080 - - - - 2 00 4 72.22.7 2 8 - - 607224 082 - - 4 4 2 00 4 80.20 6. 2 4 - - 608024 08284 B9024 666 6 2 20 4 8.20 6. 2 2 64 6084 088 - - - - 8 4 0 68 84.20 6. 2 2 4 - - 608424 08444 - - 6 /4 00 4 00.2 7.92 2 4 7 - - 60024 08477 - - 4 290 2 20.7 9.2 2 8 60 - - 60224 084782 B99024 6670 9 2 9 40 86 Uses: For hanging lights and plants Two hooks, two wood screws and two toggle bolts per bag Bags: 0 per box; order unit is bag Bag Weight Working Cat. UPC Per Box Load Limit Finish 02048 lb kg lb kg White B90 884 60 27 Brass B960 886 60 27 Antique Brass B970 8872 60 27 Black B990 8896 60 27 Swag Hooks Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 7

snaps Malleable Iron and Steel Snaps 2 6-6 200 Accessories 20 222 22 A KEY B C 226 20-20 Figure Dimensions Tagged Case Working A B C Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm 02048 Pack Pack lb kg lb kg 2 8 6 Rigid, Round Eye, Bolt Snap Zinc 8 6 27 2 9 T7600 98 0 00 4 6.4 70 2 6 2 89 Double Ended, Bolt Snap Zinc - - 2 89 9 2 7 T7600 20028 0 00 0 4. 70 2 62 4 8 0 Double Ended, Bolt Snap Zinc - - 4 8 0 2 0 T760 967 0 00 4 6.4 70 2 6 4 4 2 Double Ended, Bolt Snap Zinc - - 4 4 2 8 0 T7602 9688 0 00 8 8.2 0 0 200 4 9 Rigid, Strap Eye, Spring Snap Zinc 4 9 76 8 0 T7600 20004 0 00 8.6 80 6 200 2 Rigid, Strap Eye, Spring Snap Zinc 2 4 8 7 6 T7600 200 0 00 0 4. 90 4 200 2 8 Rigid, Strap Eye, Spring Snap Zinc 2 8 6 97 2 T76006 9282 0 00 7 7.7 80 6 20 2 Rigid, Open Eye, Spring Snap Zinc 2 76 6 8 T760080 204 0 00 6.6 20 9 222 4 9 Swiveling, Round Eye, Spring Snap Zinc 4 9 4 9 7 6 T76070 9284 0 00 2.4 70 2 22 2 Swiveling, Round Eye, Bolt Snap Zinc 2 4 02 8 0 T76020 96 0 00.9 0 0 22 8 6 Swiveling, Round Eye, Bolt Snap Zinc 8 6 4 02 8 0 T76080 969 0 00 4 6.4 0 0 22 4 9 Swiveling, Round Eye, Bolt Snap Zinc 4 9 4 4 08 8 0 T7608 970 0 00 6.8 00 4 22 2 Swiveling, Round Eye, Bolt Snap Zinc 2 4 8 7 2 2 T76082 978 0 00 20 9. 00 4 226 2 Swiveling, Open Eye, Bolt Snap Zinc 2 4 4 2 2 2 T760 972 0 00 24 0.9 0 4 20 8 0 Rigid, Open Eye, Bolt Snap Zinc 8 0 8 86 2 9 T760600 200 0 00 9. 4.2 40 8 2 8 0 Rigid, Open Eye, Bolt Snap Zinc 8 0 2 89 2 0 T76060 972 0 00.9 6. 60 27 22 2 Rigid, Open Eye, Bolt Snap Zinc 2 4 02 7 6 T760602 972 0 00 7 7.7 60 27 240 2 Rigid, Open Eye, Bolt Snap Zinc 2 4 4 08 2 2 T76060 9749 0 00 26.6 00 4 24 2 Rigid, Open Eye, Bolt Snap Zinc 2 4 2 T7604 989 0 0 22 0.0 200 9 20 8 6 Rigid, Open Eye, Bolt Snap Zinc 8 6 7 78 9 6 4 T76046 996 0 00 64 29.0 240 09 NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 8

snaps www.apexhandtools.com/campbell Malleable Iron and Steel Snaps 4 4 406-407 424 47 822 80 8 00 40-407 247 42 69 A KEY B C Accessories 0, Round Eye 0, Strap Eye 02, Strap Eye 02, Round Eye 07 Figure Dimensions Tagged Case Working A B C Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm 02048 Pack Pack lb kg lb kg 7 8 22 Swiveling, Round Eye, Animal Tie Snap Zinc 7 8 22 27 9 6 4 T76080 9602 0 0 440 200 4 4 6 Swiveling, Round Eye, Spring Snap Nickel 4 6 7 8 48 2 4 T760602 20042 0 00 2 0.9 20 9 4 8 0 Swiveling, Round Eye, Spring Snap Nickel 8 0 2 2 4 T76092 969 0 00 2 0.9 20 9 4 8 0 Rigid, Round Eye, Spring Snap Zinc 8 0 2 2 4 T76020 9260 0 00 2.6.2 0 4 407 4 9 Swiveling, Round Eye, Spring Snap Zinc 4 9 4 8 0 9 2 7 T76060 2009 0 00 0 4. 80 6 424 - - Breaching Snap Zinc - - 2 2 64 9 2 7 T76026 9626 0 00 6 2.7 80 6 47 8 0 Swiveling, Round Eye, Spring Snap Nickel 8 0 2 2 64 7 2 6 T760602 976 0 00.6.6 0 4 822 8 6 Rigid, Round Eye, Cap Snap Zinc 8 6 27 9 6 4 T7602 204 0 00 2 4. 20 4 80 4 9 Swiveling, Round Eye, Cap Snap Zinc 4 9 2 89 2 9 T760680 20066 0 00.9 00 4 80 2 Swiveling, Round Eye, Cap Snap Zinc 2 4 2 4 7 6 T76044 9640 0 00 22 0 90 86 8 4 Double Ended, Cap Snap Zinc - - 4 7 6 T7609 972 0 00 0.6 20 00 2 Rigid, Round Eye, Panic Snap Nickel 2 4 02 - - T7604002 967 0 00 4. 40 64 40 2 7 8 7 Swiveling, Open Eye, Spring Snap Zinc - - 2 7 8 7 4 6 T760706 9288 0 00 6 2.7 0 4 407 4 9 Swiveling, Open Eye, Spring Snap Zinc - - 4 9 6 8 T76070 2007 0 00 6.9. 60 27 247 4 4 2 Swiveling, Dbl Ended, Spring Snap Nickel - - 4 4 2 7 2 6 T760402 20462 0 00 7.2 0 4 42 7 8 22 Swiveling, Round Eye, Animal Tie Snap Zinc 7 8 22 4 7 8 24 7 8 22 T760740 976 0 00 4.8 20.8 00 6 69 8 6 Rigid, Fixed Eye Hook Zinc 8 6 8 92 9 6 4 T7620794 204609 0 00 2.8 4.9 000 44 0 8 0 Swiveling, Round Eye, Trigger Snap Nickel 8 0 2 2 64 8 0 T760702 9770 0 00 8.6 70 2 0 8 6 Swiveling, Strap Eye, Trigger Snap Nickel 8 6 2 2 64 8 0 T7604622 9664 0 00 8.6 70 2 02 8 0 Swiveling, Round Eye, Bolt Snap Nickel 8 0 2 7 8 7 6 8 T7607602 9787 0 00 7.4.4 60 27 07 8 0 Swiveling, Open Eye, Spring Snap Nickel 8 0 2 2 64 7 2 6 T7607702 20080 0 00 4.8 0 4 NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 9

snaps Die Cast Zinc Snaps 07Z 2Z 2Z 62Z-6Z 22Z Accessories 2Z 4Z 40Z 4Z 47Z 42Z 0Z, Round Eye 0Z, Strap Eye 0Z 02Z KEY C A B Figure Dimensions Tagged Case Working A B C Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm 02048 Pack Pack lb kg lb kg 07Z 2 Swiveling, Strap Eye, Bolt Snap Nickel 2 6 8 8 0 T76002 20097 0 00 2 80 6 2Z 2 Rigid, Strap Eye, Bolt Snap Nickel 2 6 78 8 0 T7602 9794 0 00 0 40 8 2Z 8 6 Rigid, Round Eye, Bolt Snap Nickel 8 6 8 86 8 0 T76202 2027 0 00 0 90 4 62Z - - Double Ended, Bolt Snap Nickel - - 4 02 8 0 T7602 204 0 00 6 60 27 6Z - - Double Ended, Bolt Snap Nickel - - 4 8 7 7 6 T762 9800 0 00 4 6 70 2 22Z 2 Swiveling, Round Eye, Bolt Snap Nickel 2 2 89 8 0 T7602 200 0 00 7 90 4 22Z 8 6 Swiveling, Round Eye, Bolt Snap Nickel 8 6 2 89 8 0 T76402 204 0 00 80 6 22Z 4 9 Swiveling, Round Eye, Bolt Snap Nickel 4 9 6 94 8 0 T7642 208 0 00 70 2 22Z 2 Swiveling, Round Eye, Bolt Snap Nickel 2 4 4 08 2 T76422 206 0 00 20 9 90 4 2Z 8 6 Swiveling, Round Eye, Quick Snap Nickel 8 6 8 86 8 6 T7602 987 0 00 4 6 80 6 2Z 2 Swiveling, Round Eye, Quick Snap Nickel 2 6 97 8 6 T76082 200 0 00 8 8 70 2 4Z 4 6 Swiveling, Round Eye, Spring Snap Nickel 4 6 2 7 2 6 T76602 9824 0 00 2. 20 9 4Z 8 6 Swiveling, Strap Eye, Spring Snap Nickel 8 6 2 8 67 9 2 7 T76802 2072 0 00 2 0 4 47Z 8 0 Swiveling, Round Eye, Spring Snap Nickel 8 0 2 9 6 6 9 2 7 T76902 2089 0 00 4 2 0 4 42Z 7 8 22 Swiveling, Round Eye, Animal Tie Snap Nickel 7 8 22 4 6 22 7 8 22 T76602 9848 0 00 8 7 0 68 0Z 8 0 Swiveling, Round Eye, Trigger Snap Nickel 8 0 2 7 6 62 8 0 T766402 98 0 00 7 0 4 0Z 2 Swiveling, Round Eye, Trigger Snap Nickel 2 2 6 68 8 0 T76642 7972 0 00 7 40 8 0Z 4 9 Swiveling, Round Eye, Trigger Snap Nickel 4 9 4 02 9 6 4 T766602 98 0 00 4 6 90 4 02Z 8 0 Swiveling, Round Eye, Bolt Snap Nickel 8 0 2 6 68 6 8 T766702 2096 0 00 6 0 2 NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 60

snaps www.apexhandtools.com/campbell Solid Bronze Snaps 6B-6B 22B 2B 249B 2B 2B 0B 02B KEY A B C Accessories Figure Dimensions Tagged Case Working A B C Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm 02048 Pack Pack lb kg lb kg 6B - - Double Ended, Bolt Snap Polished - - 2 87 6 8 T762004 20226 0 00 4 6 60 27 6B - - Double Ended, Bolt Snap Polished - - 4 2 4 2 0 T76204 202 0 00 20 9 00 4 22B 8 6 Swiveling, Round Eye, Bolt Snap Polished 8 6 8 79 8 0 T76204 9886 0 00 4 6 70 2 22B 4 9 Swiveling, Round Eye, Bolt Snap Polished 4 9 2 80 8 0 T7624 7978 0 00 4 6 70 2 22B 2 Swiveling, Round Eye, Bolt Snap Polished 2 7 2 90 8 0 T76224 989 0 00 8 8 90 4 22B 4 2 Swiveling, Round Eye, Bolt Snap Polished 4 2 4 4 2 9 2 T76204 9862 0 00 0 20 4 2B 8 0 Rigid, Open Eye, Bolt Snap Polished 8 0 2 87 8 0 T762204 79792 0 00 4 6 70 2 249B(0) 8 0 Rigid, Round Eye, Quick Snap Polished 8 0 2 2 9 2 7 T76204 20240 0 00 6 60 27 249B() 8 6 Rigid, Round Eye, Quick Snap Polished 8 6 2 7 8 7 4 9 T7624 2027 0 00 70 2 249B(2) 6 7 Rigid, Round Eye, Quick Snap Polished 6 7 29 2 98 9 2 T76224 974 0 00 2 00 4 249B() 4 9 Rigid, Round Eye, Quick Snap Polished 4 9 64 82 9 6 4 T76204 20202 0 00 20 9 40 64 2B() 8 6 Swiveling, Round Eye, Quick Snap Polished 8 6 6 84 6 8 T762404 20264 0 00 6 7 60 27 2B(2) 6 7 Swiveling, Round Eye, Quick Snap Polished 6 7 6 94 7 6 T762064 2029 0 00 20 9 60 27 2B() 4 9 Swiveling, Round Eye, Quick Snap Polished 4 9 4 2 4 9 6 4 T76244 2027 0 00 28 40 64 2B 4 9 Snap Hook Polished 4 9 4 6 0 8 6 T7620804 9879 0 00 0 40 64 0B 2 Swiveling, Round Eye, Trigger Snap Polished 2 2 2 6 7 6 T76204 9909 0 00 40 8 02B 8 0 Swiveling, Round Eye, Bolt Snap Polished 8 0 2 9 2 8 4 6 T762604 996 0 00 8 4 80 6 02B 2 Swiveling, Round Eye, Bolt Snap Polished 2 2 6 7 4 6 T76264 992 0 00 8 4 40 8 NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 6

snaps & gatehook Stainless Steel (#6) Snaps 62S 22S 249S 2S KEY C Accessories Figure 2S 02S Dimensions Tagged Case Working A B C Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm 02048 Pack Pack lb kg lb kg 62S - - Double Ended, Bolt Snap Polished - - 4 02 8 0 T76204 202 0 00 6 0 9 0S A B 22S 2 Swiveling, Round Eye, Bolt Snap Polished 2 6 84 8 0 T7604 79907 0 00 6 70 77 22S 4 9 Swiveling, Round Eye, Bolt Snap Polished 4 9 2 80 8 0 T7624 2049 0 00 0 80 82 22S 8 28 Swiveling, Round Eye, Bolt Snap Polished 8 28 4 6 0 9 2 T764 20462 0 00 26 2 200 9 249S 8 0 Rigid, Round Eye, Quick Snap Polished 8 0 2 2 9 2 7 T76404 204647 0 00 2 90 4 249S 8 6 Rigid, Round Eye, Quick Snap Polished 8 6 2 7 8 7 8 0 T7644 206 0 00 0 60 7 249S 4 9 Rigid, Round Eye, Quick Snap Polished 4 9 29 2 99 9 6 4 T7644 206 0 00 20 9 90 86 2S 6 7 Swiveling, Round Eye, Quick Snap Polished 6 7 6 9 7 6 T7624 94 0 00 40 8 220 00 2S 4 9 Swiveling, Round Eye, Quick Snap Polished 4 9 4 2 4 9 6 4 T764 2070 0 00 0 200 9 2S 4 9 Snap Hook Polished 4 9 4 6 0 8 6 T76604 2087 0 00 20 9 400 8 2S 8 28 Snap Hook Polished 8 28 4 2 2 8 2 2 8 T7664 2094 0 0 20 9 400 8 0S 2 Swiveling, Round Eye, Trigger Snap Polished 2 2 2 6 7 6 T76704 20400 0 00 0 80 6 02S 2 Swiveling, Round Eye, Bolt Snap Polished 2 2 6 7 4 6 T76804 7998 0 00 8 4 0 2 Gatehook Figure Dimensions Bagged Case Working A B C Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm 02048 Pack Pack lb kg lb kg 444 4 02 Reverse Eye, with Steel Staples (2) Zinc 8 0 4 02 4 6 B760660 6724 0 00 20 9 -- -- NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 62

links & swivels www.apexhandtools.com/campbell Quick Links, Spring Links, Swivels KEY E C D A 222 222Z 240 70 KEY D E C B A Figure Dimensions Tagged Case Working A B C D E Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm in mm in mm 02048 Pack Pack lb kg lb kg 222Z 8 6 Double, Round Eye, Swivel Nickel 8 6 2 6 68 - - - - - - T764002 990 0 00 0 90 4 B Accessories 222Z 4 9 Double, Round Eye, Swivel Nickel 4 9 76 - - - - - - T766202 98 0 00 4 6 00 4 222Z 2 Double, Round Eye, Swivel Nickel 2 9 6 90 - - - - - - T764022 9947 0 00 8 8 00 4 240 4 6 Spring Snap Link Zinc - 2 4 6 6 8 4 6 T764006 208 0 00 2 80 6 240 6 8 Spring Snap Link Zinc - 6 2 8 60 6 8 6 8 4 6 T76406 2092 0 00 8 4 0 9 240 8 0 Spring Snap Link Zinc - 7 2 4 70 8 0 8 0 6 8 T764026 20608 0 00 0 60 7 240 7 6 Spring Snap Link Zinc - 8 8 79 7 6 7 6 6 8 T76406 206 0 00 7 200 9 240 2 Spring Snap Link Zinc - 9 2 89 2 2 8 0 T764046 20622 0 00 20 9 20 04 240 8 6 Spring Snap Link Zinc - 0 4 02 8 6 9 6 4 7 6 T764066 2069 0 00 2 280 27 240 4 9 Spring Snap Link Zinc - 4 4 2 4 9 8 6 7 6 T764068 994 0 0 20 9 0 9 240 2 Spring Snap Link Zinc - 2 2 40 6 2 4 9 8 6 T764074 204777 0 0 0 400 8 70 8 Quick Link Zinc -. 8 8 8 29 7 6 T76406 20646 0 00 4 2 220 00 70 6 Quick Link Zinc - 2 6 8 4 9 6 4 T7646 206 0 00 8 4 660 00 70 4 6 Quick Link Zinc - 6 2 4 7 4 6 6 46 8 6 T76426 804 0 00 0 880 400 70 6 8 Quick Link Zinc - 8 2 6 7 6 8 2 4 7 4 9 T7646 20660 0 00 20 9 760 800 70 8 0 Quick Link Zinc - 9 6 8 8 0 2 2 64 6 2 T76446 20677 0 00 2 2200 000 70 2 Quick Link Zinc - 2 4 4 08 9 6 4 4 8 2 T7646 20684 0 0 27 2 00 00 NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 6

Stainless Steel Spring Links, Quick Links links & spring snap 240 70 KEY D E C A KEY E D C A Accessories Figure B B A B Dimensions C D E Cat. Tagged UPC Shelf Case Case Weight Working Load Limit in mm Description Finish in mm in mm in mm in mm in mm 02048 Pack Pack lb kg lb kg 240 4 6 Spring Link, Cast SS Polished - 6 2 8 60 4 6 8 0 6 8 T760406 94 0 00 2 60 7 240 6 8 Spring Link, Cast SS Polished - 8 8 79 8 0 2 8 0 T76046 9422 0 00 8 4 200 9 240 8 0 Spring Link, Cast SS Polished - 9 2 89 7 6 9 6 4 7 6 T760426 949 0 00 260 8 240 7 6 Spring Link, Cast SS Polished - 0 7 8 98 2 8 6 2 T76046 9446 0 00 6 7 20 4 240 2 Spring Link, Cast SS Polished - 4 2 4 8 6 6 7 9 6 4 T760446 94 0 00 6 7 40 204 70 8 Quick Link, Cast SS Polished -. 8 8 8 29 7 6 T76006 9460 0 00 4 2 220 00 70 6 Quick Link, Cast SS Polished - 2 6 8 4 9 6 4 T76026 9477 0 00 0 660 00 70 4 6 Quick Link, Cast SS Polished - 6 2 4 7 4 6 6 46 8 6 T7606 9484 0 00 0 880 400 70 6 8 Quick Link, Cast SS Polished - 8 2 6 7 6 8 2 4 7 4 9 T76046 949 0 00 20 9 40 700 70 8 0 Quick Link, Cast SS Polished - 9 6 8 8 0 2 2 64 6 2 T7606 907 0 00 20 9 40 700 Aluminum Spring Snap - 0 Assorted Colors Figure Dimensions Tagged Case Working A B C D E Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm in mm in mm 02048 Pack Pack lb kg lb kg - 6 8 Aluminum Spring Snap Asst d - 8 8 79 2 2 2 64 8 29 T764000 206092 0 00 6 7 4 NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 64

pulleys www.apexhandtools.com/campbell Pulleys One-piece, cast construction with triple, copper/nickel plating and solid brass or brass plated sheaves. Figure 07 074 076 078 Dimensions Tagged Case Working Sheave Dia. Eye Rope Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm 02048 Pack Pack lb kg lb kg 07 2 Swivel Eye. Single Sheave Pulley Nickel 2 6 8 6 8 T7602 9978 0 00 8 4 2 Accessories 07 4 9 Swivel Eye. Single Sheave Pulley Nickel 4 9 6 8 4 6 T76002 79990 0 00 0 2 07 2 Swivel Eye. Single Sheave Pulley Nickel 2 6 8 6 8 T7602 80002 0 00 7 8 0 4 07 4 2 Swivel Eye. Single Sheave Pulley Nickel 4 2 8 6 8 0 T76022 8009 0 00 0 0 2 07 2 8 Swivel Eye. Single Sheave Pulley Nickel 2 8 8 6 8 0 T7602 996 0 0 7 0 2 07 2 Swivel Eye. Single Sheave Pulley Nickel 2 8 6 2 T76042 80026 0 0 2 0 2 074 2 Rigid Eye. Single Sheave Pulley Nickel 2 6 6 8 T76062 998 0 00 6 0 4 074 4 9 Rigid Eye. Single Sheave Pulley Nickel 4 9 6 4 6 T7600 2047 0 00 0 0 4 074 2 Rigid Eye. Single Sheave Pulley Nickel 2 7 2 6 6 8 T762 80040 0 00 7 8 2 074 4 2 Rigid Eye. Single Sheave Pulley Nickel 4 2 8 0 8 0 T7620 8007 0 00 0 0 0 074 2 8 Rigid Eye. Single Sheave Pulley Nickel 2 8 8 0 8 0 T762 9992 0 0 7 0 0 074 2 Rigid Eye. Single Sheave Pulley Nickel 2 2 2 2 T7642 80064 0 0 2 0 2 7 076 4 9 Rigid Eye. Double Sheave Pulley Nickel 4 9 6 4 6 T76202 20424 0 00 7 8 40 8 076 2 Rigid Eye. Double Sheave Pulley Nickel 2 7 2 6 6 8 T7622 204 0 00 20 9 2 076 2 8 Rigid Eye. Double Sheave Pulley Nickel 2 8 8 0 8 0 T76222 9200 0 0 20 9 90 4 078 4 9 Swivel Eye. Double Sheave Pulley Nickel 4 9 6 8 4 6 T7602 8009 0 00 7 8 2 078 2 Swivel Eye. Double Sheave Pulley Nickel 2 6 8 6 8 T762 800 0 00 24 2 Note: All bagged items have one product per bag. NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 6

pulleys & rope accessories Heavy Duty Pulleys Accessories T7002 Cat. Tagged UPC 02048 T70402 T7042 T7002 T722 A Max Cable Diameter Steel body and die-cast zinc sheave Zinc plated to protect against rust and corrosion Powder metal bushing to extend pulley life and provide smooth operation For rope up /8 or /2 as noted Working Load Limit stamped on pulley body For indoor or outdoor use Mount wall and ceiling pulleys with 4D or 6D nails or #4 x /4 screws Order unit is each Case Weight Working Load Limit Sheave Diameter & Type Shelf Case in mm Description Finish in mm Pack Pack lb kg lb kg T700 96 2 8 Swivel Eye, Single Sheave Zinc plate 8 0 0 6 7 420 90 T7002 978 2 Swivel Eye, Single Sheave Zinc plate 8 0 0 480 28 T700 20608 2 2 64 Swivel Eye, Single Sheave Zinc plate 8 0 2 6 7 0 249 T7004 0009 76 Swivel Eye, Single Sheave Zinc plate 2 2 26 2 60 29 T7040 992 2 8 Fixed Eye, Single Sheave Zinc plate 8 0 0 9 4 420 90 T70402 9408 2 Fixed Eye, Single Sheave Zinc plate 8 0 0 6 480 28 T7040 000 2 2 64 Fixed Eye, Single Sheave Zinc plate 8 0 2 7 8 0 249 T70404 00042 76 Fixed Eye, Single Sheave Zinc plate 2 2 26 2 60 29 T7042 98 2 8 Fixed Eye, Double Sheave Zinc plate 8 0 0 7 400 8 T700 00028 2 8 Wall/Ceil Mount, Single Sheave Zinc plate 8 0 0 7 8 00 4 T7002 000 2 Wall/Ceil Mount, Single Sheave Zinc plate 8 0 0 2 0 00 4 T722 00004 2 Joist Mount, Single Sheave Zinc plate 8 0 0 2 0 00 4 Rope Accessories Cleats are zinc die-cast, nickel plated or brass For fastening rope for boats, awnings, and more Figure 40 T769800 T76980 B767904 B76790 Dimensions Tagged Case Length Rope Cat. UPC Shelf Case Weight in mm Description Finish in mm in mm 02048 Pack Pack lb kg 40 2 2 64 Rope Cleat Nickel 2 2 64 - - T76402 9202 0 00 4 2 40 4 2 4 Rope Cleat Nickel 4 2 4 - - T7642 92029 0 00 8.8 4 40 2 2 64 Rope Cleat Brass 2 2 64 - - T76404 94 0 00 2. 40 6 2 Rope Cleat Nickel 6 2 - - T76422 947 0 00 4.4 7-2 Rope Loop Nickel 2 4 7 2 T769800 286 0 00.7 2-2 Strap Loop Nickel 2 8 66 2 T76980 284 0 00. 2-4 2 Strap Loop Nickel 2 4 7 4 2 T769802 280 0 00. - 2 8 Strap Loop Nickel 8 79 2 8 T76980 2867 0 00 4. 2-2 Strap Loop Nickel 4 9 2 T769804 2829 0 00.7 - - - Rope Clamp, (2 per Bag) Zinc - - 2 B767904 789 0 00 6 - - - Rope Clamp & Thimble Zinc - - 4-8 6-0 B76790 796 0 00 6 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 66

rings & dees www.apexhandtools.com/campbell Rings (Imported) KEY A B Figure 07B T7660 Dimensions Tagged Case Working A B Cat. UPC Shelf Case Weight Load Limit in mm Description Finish in mm in mm 02048 Pack Pack lb kg lb kg - 2 Hitch Ring with 2 Screw Eye Zinc 2 0.26 7 T7660 2898 0 0. 90 4 2 2 8 Welded Ring Zinc 2 8 0.26 7 T766096 204807 0 00 9 4 200 9 2 2 Welded Ring Nickel 2 0.26 7 T76600 2029 0 00 2 200 9 2 2 2 64 Welded Ring Zinc 2 2 64 0.26 7 T7666 9204 0 00 4 6 200 9 2 8 Welded Ring Nickel 2 8 0.24 6 T766042 202 0 00 8 4 200 9 2 Welded Ring Nickel 2 0.24 6 T7662 9206 0 00 0 200 9 4 4 2 Welded Ring Zinc 4 2 0.22 6 T766084 9284 0 00 6 200 9 7 2 Welded Ring Nickel 2 0.8 4 T76602 200 0 00 4 2 200 9 7 4 2 Welded Ring Nickel 4 2 0.8 4 T76602 208 0 00 2 200 9 7B 8 28 Solid Bronze Ring Polished 8 28 0.2 T76624 20288 0 00 4 2 0 68 7B 2 Solid Bronze Ring Polished 2 0.2 6 T76624 9200 0 00 0 0 68 Accessories Dees KEY A B C 20 Figure A B C Tagged Case Working (Inside Dia.) (Wire Dia.) (Inside Dia.) Weight Load Limit Cat. UPC Shelf Case in mm Description Finish in mm in mm in mm 02048 Pack Pack lb kg lb kg 20 2 Welded Dee Nickel 2 0.2 6 2 T766222 20482 0 00 4 2 200 9 20 4 2 Welded Dee Zinc 4 2 0.24 6 8 29 T766242 92067 0 00 6 200 9 20 2 8 Welded Dee Zinc 2 8 0.24 6 2 8 T7662 92074 0 00 8 4 200 9 20 2 Welded Dee Nickel 2 0.26 7 4 44 T766272 20484 0 00 200 9 NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 67

miscellaneous accessories Footman Loops T769800 T76980 Accessories Dimensions Tagged Case Overall Length Inside Loop Length Diameter Cat. UPC Shelf Case Weight in mm Description Finish in mm in mm in mm 02048 Pack Pack lb kg 2 Rope Loop Nickel 2 4 70 4 4 4 6 T769800 286 0 00.7 2 2 Strap Loop Nickel 2 8 67 2 4 6 T76980 284 0 00. 4 2 Strap Loop Nickel 2 4 70 8 4 4 6 T769802 280 0 00.6 2 8 Strap Loop Nickel 8 79 8 4 4 6 T76980 2867 0 00.9 2 2 Strap Loop Nickel 4 9 2 8 6 8 T769804 2829 0 00. Animal Accessories Figure Cat. UPC Case Case Weight Case Description Packed Finish 02048 Pack lb kg Cubes 949 Spiral Tie out Stake, 2 Bulk Zinc 7692006 4496 2 2 0.4 Swaging Tool Uses: For swaging ferrules onto wire rope or cable Warning: Do Not use on coated cable Follow assembly instructions Swaging Tools For Ferrules & Stops Cat. UPC Weight Ea. Description Pkd in mm in mm 02048 lb kg 8 Swaging Tool Bulk 6 6 767907 90407 6.0 NO EXCEDA el límites de carga de trabajo (WLL). Para NO prevenir USE para la levantamiento posibilidad de una aéreo, lesión para personal soportar sería: peso humano, para equipo deportivo o de patios de recreo, ni a manera de NO dispositivo EXCEDA de los seguridad. límites de carga de las cadenas o componentes. NO LA USE UTILICE si hay desgaste para cargar o deformación hacia arriba visible. o para izar. NO EL USO LA UTILICE INA DECUADO si la cadena puede o los resultar componentes lesiones están físicas visualmente graves distorsionados o daño a la propiedad o gastados. DO NOT EXCEED the working load limit (WLL). To DO prevent NOT the USE possibility for overhead of serious lifting, bodily to support injury: human weight, for DO playground NOT EXCEED or athletic the equipment, working load or limits as a safety for chain device. or components. DO NOT USE for if visibly overhead worn lifting or distorted. hoisting. DO MISUSE NOT USE can result if the chain serious or components bodily injury are or property visibly distorted damage. or worn. 68

ferrules, stops clips & thimbles www.apexhandtools.com/campbell Warning; To prevent injury: Do Not use on coated cable. If used on coated cable, remove the coating from the assembly area Follow assembly instructions Ferrules and Stops Cable Ferrule and Stop Dimensions For Cable Cat. UPC Shelf Case Case Weight Description Material in mm 02048 Pack Pack lb kg Cable Ferrules (2) and Stops (2) Aluminum 6 B76704 74 0 00 4 2 Cable Ferrules (2) and Stops (2) Aluminum 2 2 B7674 74 0 00 2 Cable Ferrules (2) and Stops (2) Aluminum 8 B76724 78 0 00 6 Cable Ferrules (2) and Stops (2) Aluminum 6 B76744 76 0 00 8 4 Cable Ferrules (2) and Stops (2) Aluminum 4 6 B7674 772 0 00 4 6 Cable Ferrules Aluminum 6 7670704 66464 0 20 2 2 Cable Ferrules Aluminum 2 2 767074 6647 0 20 2 2 Cable Ferrules Aluminum 8 7670724 66488 0 20 2 2 Cable Ferrules Aluminum 6 7670744 660 0 20 2 Accessories Warning; To prevent injury: Do Not use on coated cable. If used on coated cable, remove the coating from the assembly area Follow assembly instructions Figure Wire Rope Clips and Thimbles D Dimensions Bagged Tagged Case A (Cable ) B C D Cat. UPC Cat. UPC Shelf Case Weight in mm Description Finish in mm in mm in mm in mm 02048 02048 Pack Pack lb kg 00 6 Wire Rope Clips Galv 6 2 2 - - - - T7670409 9286 0 00 4 2 00 2-8 2- Wire Rope Clips Galv. 2-8 2-2 2 - - - - T767049 2069 0 00 4 2 00 6 Wire Rope Clips Galv 6 6 27 9 6 4 - - - - T7670429 20707 0 00 8 4 00 4 6 Wire Rope Clips Galv 4 6 2 8 6 7 - - - - T767049 2074 0 00 4 6 00 6 8 Wire Rope Clips Galv 6 8 2 8 6 7 - - - - T7670449 2072 0 00 20 9 00 8 0 Wire Rope Clips Galv 8 0 2 7 8 22 - - - - T767049 2078 0 00 20 9 00 2 Wire Rope Clips Galv 2 2 2 64 2 - - - - T7670479 2074 0 6 7 00 8 6 Wire Rope Clips Galv 8 6 2 4 70 6 0 - - - - T7670489 2072 0 6 00 4 9 Wire Rope Clips Galv 4 9 6 78 2 4 - - - - T7670499 80460 0 0 4 2 2-8 2- Wire Rope Thimbles Galv. 2-8 2- - - - - 4 44 - - T7670609 20769 0 00 2 6 Wire Rope Thimbles Galv 6 - - - - 4 44 - - T767069 20776 0 00 2 4 6 Wire Rope Thimbles Galv 4 6 - - - - 7 8 48 - - T7670629 2078 0 00 2 6 8 Wire Rope Thimbles Galv 6 8 - - - - 2 2 - - T767069 20790 0 00 7 2 8 0 Wire Rope Thimbles Galv 8 0 - - - - 2 4 7 - - T7670649 20806 0 00 8 4 2 2 Wire Rope Thimbles Galv 2 - - - - 2 2 64 - - T767069 208 0 6 2 8 6 Wire Rope Thimbles Galv 8 6 - - - - 2 7 8 7 - - T7670669 20820 0 7 8 00 8 Wire Rope Clips (2) w/thimble () Galv 8 2 8 2 4 44 B76709 66846 - - 0 00 8 8 00 6 Wire Rope Clips (2) w/thimble () Galv 6 6 27 9 6 4 4 44 B7679 668 - - 0 00 9 9 00 4 6 Wire Rope Clips (2) w/thimble () Galv 4 6 2 8 6 7 7 8 48 B76729 66860 - - 0 00 20 9 Note: All bagged items have one product per bag, except where noted. 2 C B 00 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 69

rope clips, thimbles, pullers Stainless Steel Wire Rope Clips & Light Duty Thimbles Accessories Warning; To prevent injury: Do Not use on coated cable. If used on coated cable, remove the coating from the assembly area Follow assembly instructions Standard Material: Cast Stainless Steel Order unit is Each Tagged Case Cat. UPC Shelf Case Weight in mm Description Finish 02048 Pack Pack lb kg 8 Wire Rope Clips Polished T76002 204692 0 00 7 6 Wire Rope Clips Polished T7600 2047 0 00 8 4 4 6 Wire Rope Clips Polished T76004 204722 0 00 4 6 6-8 2 - Thimbles Polished T76702 20479 0 00 2 6 Thimbles Polished T7670 204746 0 00 4 6 Thimbles Polished T76704 2047 0 00 Cable Pullers Campbell s cable pullers feature double drive ratchet wheels, easy let-down releases and aircraft-type, /6 galvanized cables Built-in safety handle is designed to bend if recommended working load limit is exceeded All cable pullers packaged one per carton in attractive full color box that gives full operating instructions Caution: Do not use cable pullers to lift people or to lift loads over people. 620 6206 Cat. UPC 02048 Draw Weight Description ft m lb kg 620 6270 2 Ton Lift, Ton Pull Cable Puller, Imported 0 2.2 8 4 6206 6278 Ton Lift, 2 Ton Pull Cable Puller, Imported 6.8 9 4 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 70

anchor shackles www.apexhandtools.com/campbell Anchor Shackles, Screw Pin (Import) Consumer grade Standard Material: Shackle bodies forged steel Standard Finish: Zinc plated Design Factor: to UPC tagged Cat. UPC 02048 Shelf Case Case Weight Working Load Limit in mm Description Finish Pack Pack lb kg lb kg 6 6 Shackle, Screw Pin Zinc T9600 2009 0 00 0 00 4 4 7 Shackle, Screw Pin Zinc T96004 206 0 00 0 400 79 6 8 Shackle, Screw Pin Zinc T9600 202 0 00 20 9 700 4 Accessories 8 0 Shackle, Screw Pin Zinc T96006 200 0 00 0,000 448 2 Shackle, Screw Pin Zinc T96008 2047 0 6 2,000 896 8 6 Shackle, Screw Pin Zinc T9600 204 20 28,000,44 4 20 Shackle, Screw Pin Zinc T9602 206 20 48 22 4,000,792 2 Shackle, Screw Pin Zinc T9606 2078 2 0 0 22,000 2,240 Industrial grade Forged steel Galvanized Design Factor: to Working Load Limit shown on every shackle UPC tagged Anchor Shackles, Screw Pin (Import) Cat. UPC Shelf Case Case Weight Working Load Limit in mm Description Finish 02048 Pack Pack lb kg Tons kg 6 6 Shackle, Screw Pin Galvanized T9640 2706 0 00 6 02 4 7 Shackle, Screw Pin Galvanized T96404 268 0 00 2 44 6 8 Shackle, Screw Pin Galvanized T9640 2676 0 00 8 8 4 680 8 0 Shackle, Screw Pin Galvanized T96406 2669 0 00 2 4 907 2 Shackle, Screw Pin Galvanized T96408 262 0 6 2,84 8 6 Shackle, Screw Pin Galvanized T9640 264 2 8 7 4 2,948 4 20 Shackle, Screw Pin Galvanized T9642 262 6 4 4 4,09 7 8 22 Shackle, Screw Pin Galvanized T9644 268 0 4 6 2,897 2 Shackle, Screw Pin Galvanized T9646 264 26 2 8 2 7,7 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 7

anchor shackles, swivels Stainless Anchor Shackles, Screw Pin (Import) Type 6 Stainless Steel Cast bodies UPC tagged Accessories Cat. UPC 02048 Shelf Case Case Weight Working Load Limit in mm Description Finish Pack Pack lb kg lb kg 4 7 Shackle, Screw Pin Polished T76204 20466 0 00 20 9 800 6 6 8 Shackle, Screw Pin Polished T7620 204678 0 00 27,400 627 8 0 Shackle, Screw Pin Polished T76206 20468 0 00 42 9 2,000 896 Eye & Eye Swivels (Import) Industrial grade Forged steel Galvanized Design factor: to UPC tagged Cat. UPC 02048 Shelf Case Case Weight Working Load Limit in mm Description Finish Pack Pack lb kg lb kg 6 6 Swivel, Eye & Eye Galvanized T960 260 0 6 700 8 4 7 Swivel, Eye & Eye Galvanized T9604 277 0 0 80 86 6 8 Swivel, Eye & Eye Galvanized T960 284 0 9 9,20 67 8 0 Swivel, Eye & Eye Galvanized T9606 29 2 7 8 2,20,02 2 Swivel, Eye & Eye Galvanized T9608 2607 2 6,600,6 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 72

grab hooks www.apexhandtools.com/campbell Grab Hooks, Grade 0, (Import) Forged steel Zinc plated UPC tagged Eye Grab Hook Clevis Grab Hook Hook Style Cat. UPC 02048 Shelf Case Case Weight Working Load Limit in mm Description Finish Pack Pack lb kg lb kg 4 6 Grab Hook, Grade 0 Zinc Plated 6 8 Grab Hook, Grade 0 Zinc Plated 8 0 Grab Hook, Grade 0 Zinc Plated 2 Grab Hook, Grade 0 Zinc Plated Eye T9000424 2087 0 00 0 Clevis T900424 2096 0 00 0,00 80 Eye T900024 20844 0 00 0 22 Clevis T90024 2094 0 00 60 27,900 860 Eye T9000624 208 0 0 6 Clevis T900624 2090 0 0 4 20 2,60,200 Eye T9000824 8076 20 6 6 4,00 2,00 Clevis T900824 20967 20 40 8 Accessories Grab Hooks, Grade 4, (Import) Forged steel Grade 4 Zinc plated UPC tagged Eye Grab Hook Clevis Grab Hook Hook Style Cat. UPC 02048 Shelf Case Case Weight Working Load Limit in mm Description Finish Pack Pack lb kg lb kg 4 6 Grab Hook, Grade 4 Zinc Plated 6 8 Grab Hook, Grade 4 Zinc Plated 8 0 Grab Hook, Grade 4 Zinc Plated 2 Grab Hook, Grade 4 Zinc Plated Eye T900424 2229 0 00 40 8 Clevis T90424 92678 0 00 4 9 2,600,79 Eye T90024 22246 0 0 0 Clevis T9024 9268 0 0 6 6,900.769 Eye T900624 222 0 0 4 20 Clevis T90624 92692 0 0 6 2,400 2,449 Eye T900824 22222 20 6 6 9,200 4,7 Clevis T90824 22066 20 7 7 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 7

slip hooks Slip Hooks, Grade 0, (Import) Forged steel Zinc plated UPC tagged Accessories Eye Slip Hook Clevis Slip Hook Hook Style Cat. UPC 02048 Shelf Case Case Weight Working Load Limit in mm Description Finish Pack Pack lb kg lb kg 4 6 Slip Hook, Grade 0 Zinc Plated 6 8 Slip Hook, Grade 0 Zinc Plated 8 0 Slip Hook, Grade 0 Zinc Plated 2 Slip Hook, Grade 0 Zinc Plated Eye T900424 20868 0 00 40 8 Clevis T9400424 2090 00 80 6,00 80 Eye T90024 2087 0 00 60 27 Clevis T940024 2092 0 0 22,900 860 Eye T900624 20882 0 0 0 22 Clevis T9400624 20929 0 70 2,60,200 Eye T900824 20899 20 2 2 4,00 2,00 Clevis T9400824 806 20 78 Slip Hooks, Grade 4, (Import) Eye Slip Hook Clevis Slip Hook Clevis Slip Hook with Latch Forged steel Grade 4 Zinc plated UPC tagged Hook Style Cat. UPC Shelf Case Case Weight Working Load Limit in mm Description Finish 02048 Pack Pack lb kg lb kg Eye T90424 22277 0 00 40 8 4 6 Slip Hook, Grade 4 Zinc Plated Clevis T940424 92647 00 8 26 2,600,79 Clevis w/latch T9700424 9208 0 Eye T9024 22284 0 0 0 6 8 Slip Hook, Grade 4 Zinc Plated Clevis T94024 9264 0 9 8,900.769 Clevis w/latch T970024 92098 0 47 2 Eye T90624 2229 0 0 0 22 8 0 Slip Hook, Grade 4 Zinc Plated Clevis T940624 9266 0 72,400 2,449 Clevis w/latch T9700624 9204 0 42 9 Eye T90824 22260 20 2 2 2 Slip Hook, Grade 4 Zinc Plated Clevis T940824 22064 4 20 9,200 4,7 Clevis w/latch T9700824 220647 4 20 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 74

grab hooks www.apexhandtools.com/campbell Grab Hooks, Grade 70, (Import) Forged steel Yellow chromate finish Transport grade UPC tagged Clevis Grab Hook Hook Style Cat. UPC Shelf Case Case Weight Working Load Limit in mm Description Finish 02048 Pack Pack lb kg lb kg 6 8 Clevis Grab Hook, Grade 70 Y/C Clevis T904 20974 0 0 60 27 4,700 2,0 8 0 Clevis Grab Hook, Grade 70 Y/C Clevis T90 2098 2 2 0 6,600 2,990 Accessories Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 7

reference section S Hooks - Product Shown Actual Accessories 20 40 Proper closure 60 6 72 80 8 62 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE para cargar hacia arriba o para izar. NO LA UTILICE si la cadena o los componentes están visualmente 70 distorsionados o gastados. 00 20 DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or 84 worn. 76

accessories index www.apexhandtools.com/campbell Cat. Page Cat. Page Cat. Page Cat. Page 6400... 4 B970... 7 640... 4 B990... 7 6402... 4 B92024... 7 80024... B94024... 7 80024... B9024... 7 800624... B96024... 7 800724... B99024... 7 800924... B760660... 62 80024... B76709... 69 8024... B7679... 69 8024... B76729... 69 600898... 6 B76704... 69 60898... 6 B7674... 69 6004... B76724... 69 60024... B76744... 69 60044... B7674... 69 600424... B767904... 66 6004... B76790... 66 60064... T899720... 4 600624... T899728... 4 6004... T89976... 4 6024... T899744... 4 60244... T89972... 4 60248... 6 T899760... 4 60284... T899768... 4 6064... T899776... 4 6084... T89990... 60824... T8999... 60464... T89996... 60468... 6 T89999... 60888... 6 T490024... 60024... 7 T4900424... 60224... 7 T490024... 602024... 7 T4900624... 60224... 7 T4900824... 604024... 7 T4200... 4 606024... 7 T420... 4 60624... 7 T4202... 4 606224... 7 T90024... 6 60704... 7 T90024... 607224... 7 T9024... 608024... 7 T9024... 6084... 7 T90724... 608424... 7 T90924... 62020... 2 T700... 66 62060... 2 T7002... 66 620604... 2 T700... 66 62060... 2 T7004... 66 620704... 2 T7040... 66 620780... 2 T70402... 66 620780... 2 T7040... 66 620... 70 T70404... 66 6206... 70 T7042... 66 7670704... 69 T700... 66 767074... 69 T7002... 66 7670724... 69 T722... 66 7670744... 69 T7600... 8 767907... 68 T7600... 8 7692006... 68 T7600... 8 B9024... T76006... 8 B9024... T760080... 8 Para prevenir la posibilidad de una lesión personal sería: B90724... T76020... 8 NO EXCEDA los límites de carga de las cadenas o componentes. B90924... NO LA UTILICE para cargar hacia T760... arriba o para izar. 8 B90... NO LA UTILICE si la cadena 7 o los T7604... componentes están visualmente 8 B960... distorsionados o gastados. 7 T76046... 8 T76080... 9 T762404... 6 T76092... 9 T76244... 6 T76020... 9 T76204... 6 T76026... 9 T762604... 6 T7602... 9 T76264... 6 T76044... 9 T760406... 64 T7609... 9 T76046... 64 T7604002... 9 T760426... 64 T760402... 9 T76046... 64 T7604622... 9 T760446... 64 T7600... 8 T76006... 64 T760... 8 T76026... 64 T7602... 8 T7606... 64 T76070... 8 T76046... 64 T76080... 8 T7606... 64 T7608... 8 T76204... 62 T76082... 8 T7604... 62 T760600... 8 T7624... 62 T76060... 8 T764... 62 T760602... 8 T76404... 62 T76060... 8 T7644... 62 T760602... 9 T7644... 62 T76060... 9 T7624... 62 T760602... 9 T764... 62 T760680... 9 T76604... 62 T76070... 9 T7664... 62 T760706... 9 T76704... 62 T760740... 9 T76804... 62 T760702... 9 T76204... 72 T7607602... 9 T7620... 72 T7607702... 9 T76206... 72 T76002... 60 T76002... 70 T76082... 60 T7600... 70 T7602... 60 T76004... 70 T7602... 60 T76702... 70 T76202... 60 T7670... 70 T7602... 60 T76704... 70 T762... 60 T764002... 6 T76402... 60 T764022... 6 T7642... 60 T764000... 64 T76422... 60 T764006... 6 T7602... 60 T76406... 6 T76602... 60 T764026... 6 T76802... 60 T76406... 6 T76902... 60 T764046... 6 T766202... 6 T764066... 6 T76602... 60 T764068... 6 T766402... 60 T764074... 6 T76642... 60 T76406... 6 T766602... 60 T7646... 6 T766702... 60 T76426... 6 T76204... 6 T7646... 6 T76204... 6 T76446... 6 T762064... 6 T7646... 6 T7620794... 9 T76002... 6 T7620804... 6 T7602... 6 T762004... 6 T76022... 6 T76204... 6 T7602... 6 T76204... 6 T76042... 6 T7624... 6 T7602... 6 T76224... 6 T76062... 6 T762204... 6 T7600... 6 DO NOT EXCEED the working load limits for chain or components. T76204... DO NOT USE for overhead lifting 6 or T762... hoisting. 6 T7624... DO NOT USE if the chain or 6 components T7620... are visibly distorted or 6 T76224... worn. 6 T762... 6 Accessories 77

accessories index Cat. Page Cat. Page Cat. Page Cat. Page Accessories T7642... 6 T9400824... 74 T76202... 6 T940424... 74 T7622... 6 T94024... 74 T76222... 6 T940624... 74 T7602... 6 T940824... 74 T762... 6 T900424... 7 T76402... 66 T90024... 7 T76404... 66 T900624... 7 T7642... 66 T900824... 7 T76422... 66 T90424... 7 T766084... 67 T9024... 7 T766096... 67 T90624... 7 T7662... 67 T90824... 7 T7666... 67 T904... 7 T76624... 67 T90... 7 T76624... 67 T9600... 7 T766222... 67 T96004... 7 T766242... 67 T9600... 7 T7662... 67 T96006... 7 T766272... 67 T96008... 7 T7660... 67 T9600... 7 T76600... 67 T9602... 7 T76602... 67 T9606... 7 T76602... 67 T960... 72 T766042... 67 T9604... 72 T7670409... 69 T960... 72 T767049... 69 T9606... 72 T7670429... 69 T9608... 72 T767049... 69 T9640... 7 T7670449... 69 T96404... 7 T767049... 69 T9640... 7 T7670479... 69 T96406... 7 T7670489... 69 T96408... 7 T7670499... 69 T9640... 7 T7670609... 69 T9642... 7 T767069... 69 T9644... 7 T7670629... 69 T9646... 7 T767069... 69 T9700424... 74 T7670649... 69 T970024... 74 T767069... 69 T9700624... 74 T7670669... 69 T9700824... 74 T769800... 66, 68 T76980... 66, 68 T769802... 66, 68 T76980... 66, 68 T769804... 66, 68 T9000424... 7 T900024... 7 T9000624... 7 T9000824... 7 T900424... 7 T90024... 7 T900624... 7 T900824... 7 T900424... 74 T90024... 74 T900624... 74 T900824... 74 T90424... 74 T9024... 74 T90624... 74 Para prevenir la posibilidad de una lesión personal sería: T90824... 74 NO EXCEDA los límites de carga de las cadenas o componentes. T9400424... NO LA UTILICE para cargar 74 hacia arriba o para izar. T940024... NO LA UTILICE si la cadena 74 o los componentes están visualmente T9400624... distorsionados o gastados. 74 DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. 78

Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.

f i t t i n g s Campbell Fittings Table of Contents Fittings Contents Page No Clips, Wire Rope 82-84 Eyebolts 08-09 Eyes, Lifting 0 - Hooks, Grab/Slip 20-2 Hooks, Hoist 92-96 Hooks, Sorting 97 Hooks, Cargo 97 Hooks, Snap 97 Hooks, Latch Kits For 98 Links 06-07 Links, Clevis 0 Links, Connecting 7-9 Nuts, Eye 0 - Shackles 84-9 Swivels 99-0 Thimbles 02-0 Turnbuckles 2-6 Campbell Fittings Numerical Index 24-2 The Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 900. Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 80

f i t t i n g s www.apexhandtools.com/campbell Carbon and Alloy Steel Fittings Standards CooperTools forges Campbell fittings under established quality control procedures. Dimensional tolerances meet standards adopted by the Drop Forging Association as outlined in Standard Practices and Tolerances for Impression Die Forgings. Working load limits for carbon and alloy steel fittings are based on predetermined design factors. Working Load Limit. This is the related capacity. It is the maximum load which should ever be applied to the fittings in service, even when they are new. Proof Test. This is a term designating a quality control tensile test applied to the fitting during ar subsequent to the process of manufacture. It is the minimum force in pounds which the fitting has withstood in the condition and at the time it left the factory, under a test in which a constantly increasing force has been applied in direct tension to the fitting on a standard test machine. Ton. Where ton is used in this catalog, it refers to short ton or 2,000 pounds. : Do not exceed Working Load Limit. Most of the fittings in this catalog are intended to be used in conjunction with other components in a load sustaining system. Care should be taken to select components of compatible type, grade, size and working load limit. Any abuse, misuse or alteration of the fitting may lessen the load that the fitting will sustain. Some examples of such changes and abuses are as follows: Twisting or side loading. Disfigurement. Deterioration of the fitting caused by strain, usage or corrosion. Shock loading. Use for a purpose other than that for which the particular fitting was intended. Use to carry a load in excess of the Working Load Limit. A continual inspection program should be undertaken to discover gouges, distortion, cracks, elongation or stretching, spread in the throat, opening of hooks, severe wear, or other damage. Apex Tool Group does not accept any liability for damages which may result from alteration, misuse or abuse of the product or from use in excess of the Working Load Limit. Key to Figure Number Designations S Self-Colored G Galvanized A Alloy H Heat Treated NOTICE: The product specifications and dimensions are as accurate as possible at the time of printing. However, because we are constantly improving the quality and design of our products, they can change without notice. Fittings Stainless Forged Fittings Campbell stainless forged fittings are used in place of carbon steel fittings for marine and food processing applications and where fittings are exposed to oxidizing acids, alkalis, neutral brines and detrimental temperatures. They have won wide acceptance in aviation, boating, cements, chemicals, fertilizers, fishing, food processing, hydrodynamics and nuclear energy. Many are used in the fields of oceanography, petroleum, pulp and paper manufacturing, sewage disposal, textiles, water purification and yachting. All stainless fittings are made of Type 6 stainless steel and have an electro-polished finish for improved stress relief, surface appearance and resistance to corrosion and chemical attack. NOTICE: The product specifications and dimensions are as accurate as possible at the time of printing. However, because we are constantly improving the quality and design of our products, they can change without notice. Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 8

f i t t i n g s Forged Wire Rope Clips 000-G Forged Stainless Steel 00 Malleable Iron Fittings READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING THESE WIRE ROPE CLIPS. 4. IMPORTANT! Apply the initial load to test the assembly. This load should be equal or greater weight than loads expected in use. Retighten nuts to recommended torque. Periodically, inspect assembly and tighten nuts to recommended torque. Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Prepare wire rope end termination only as instructed. Do not use on plastic coated wire rope. Periodically inspect assembly for wear and abuse, and tighten nuts to recommended torque. If worn, distorted or damaged, discard and replace. Always stand clear of loads being lifted. Campbell forged carbon steel wire rope clips meet the design requirements of Federal Specification FF-C-40, Type, Class. The base is drop-forged. All parts are galvanized to ASTM A- specification. The U-bolt is dyed blue for identification. Campbell stainless wire rope clips are all drop-forged and made of Type 6 Stainless Steel, and have an electro-polished finish. Wire rope clips are used for making eye termination assemblies. IMPORTANT: Instructions For Use The efficiency rating of a properly installed clip is based upon the catalog breaking strength of wire rope. The efficiency rating for clip sizes /8 through 7/8 is 80% and for sizes through 2 is 90%. When a pulley is used in place of thimble for turning back the rope, one additional clip should be added. The minimum number of clips shown in the table is based on using right or lang lay wire rope, 6x9 class, or 6x7 class, IWRC or fiber core, IPS or EIPS. If Seale construction or similar large outer wire type construction in the 6x9 class is being used for and larger wire rope, one additional clip should be added. The minimum number of clips shown in the table can be used with right regular lay wire rope, 8x9 class, fiber core IPS or IPS for -/2 and smaller wire rope. The number of clips shown also applies to right regular lay wire rope 8x7 class, fiber core IPS or XIPS for -/4 and smaller wire rope. For classes of wire rope not mentioned, additional clips may be necessary to make a proper termination. Do not use on plastic coated wire rope. L Clip Minimum Amount of Rope Torque, of to Turn Back Foot Weight in. mm Clips in. mm lb kg /8 2 /2 89 2 /6 2 4 02 8 4 /4 6 2 27 7 /6 8 2 /2 40 0 4 /8 0 2 6 /2 6 4 20. Turn back specified amount of rope per clip size (shown in the table below) from the thimble. Install clip on base width from dead end of rope (U-bolt over dead end). Tighten nuts evenly to recommended torque. 2. Assemble the next clip as close to the loop as possible. Turn nuts alternately and firmly until the ropes make contact. Para prevenir la posibilidad de lesiones graves:. If NO any EXCEDA additional el límite clips de carga are required, de trabajo (WLL). they should be equally NO LA spaced UTILICE between choque o the golpee first la two. carga. Tighten all nuts evenly NO on USE all el clips accesorio to recommended si se ve deformado torque o desgastado. (see table). 7 /6 2 7 78 6 0 /2 /2 292 6 0 9 /6 4 2 0 9 4 /8 6 2 0 9 4 /4 9 4 8 47 0 9 7 /8 22 4 9 48 22 02 2 26 660 22 02 /8 29 6 4 864 22 02 /4 2 7 44 8 60 6 /2 8 8 4 72 60 6 /4 44 8 6 49 90 268 2 8 7 80 70 4 NOTE: If more clips are used than specified in the table above, the DO NOT EXCEED the working load limit. amount of rope turnback should be increased accordingly. The data DO NOT shock or impact load. above based on use of Brewer-Titchener forged wire rope clips on DO NOT USE if the fitting is visibly distorted or worn. new rope. 82

f i t t i n g s www.apexhandtools.com/campbell 000-G, Wire Rope Clips (Forged Carbon Steel, Galvanized) Standard Material: Base is drop-forged carbon steel, with heavy hex nuts Standard Finish: Galvanized to ASTM A- specification Other Features: Meets specification FF-C-40, Type, Class Note: See application and warning information Min. Dimensions For Rope of A Clips Weight/ Dia. Cat. UPC Clips UNC-2A B C D E F G Per 00 in. mm 02048 Req. in. mm in. mm in. mm in. mm in. mm in. mm in. mm Box lb kg * 8 699024 099908 2 7 2 6 4 9 7 6 9 6 4 7 6 29 2 77 6 27 00 6 * 6 69904 0999 2 4 6 6 24 9 6 4 8 6 2 6 8 8 29 00 0 * 4 6 699044 099922 2 6 8 2 26 8 6 2 2 8 2 2 7 8 29 7 6 7 00 8 8 * 6 8 69904 09999 2 8 0 6 6 2 7 8 22 4 9 6 29 6 4 00 2 8 0 699064 099946 2 7 6 2 8 6 24 2 29 2 2 9 6 6 49 7 48 22 7 6 699074 0999 2 2 2 8 29 8 29 2 6 40 2 4 7 0 72 2 699084 099960 2 2 8 29 8 29 6 27 6 4 2 4 7 0 76 9 6 4 699094 099997 9 6 4 2 8 60 8 4 2 9 2 6 46 2 7 6 62 0 96 44 8 6 69904 099984 9 6 4 2 8 60 2 8 4 2 9 2 2 6 2 2 7 6 62 2 0 48 4 9 69924 09999 4 8 2 4 70 2 8 2 8 2 8 2 6 9 2 6 7 2 60 7 7 8 22 69944 00000 4 4 0 8 79 7 8 48 4 44 7 2 9 2 2 64 4 8 2 240 09 Fittings 2 69964 0007 4 0 2 89 2 2 2 7 8 48 4 44 2 4 70 8 86 2 270 2 8 29 69984 00024 6 4 0 7 8 98 2 8 4 2 2 2 29 2 48 76 8 92 0 40 4 4 2 699204 000 7 7 8 9 4 4 08 2 8 60 2 4 7 2 7 2 6 4 8 4 02 0 468 22 2 8 699244 00048 8 7 8 9 4 6 2 2 4 7 2 9 6 6 2 9 6 6 2 89 4 8 0 600 272 4 44 69928 000 8 8 29 6 48 2 4 70 6 78 2 4 70 4 9 6 Bulk 900 409 2 6992 00062 8 4 2 6 2 6 76 8 86 8 79 4 4 08 7 8 49 Bulk,20 8 * Bagged, unassembled 00, Wire Rope Clips (Malleable Iron, Zinc Plated) (Imported) Standard Material: Base is cast malleable iron with regular hex nuts Note: See application and warning information. Figure Dimensions Tagged Case A B C Weight Cat. UPC Shelf Case in mm in mm in mm in mm 02048 Pack Pack lb kg 00 6 6 7 8 9 7 6 T7670409 9286 0 00 2 00 8 8 2 2 T767049 2069 0 00 4 2 00 6 6 6 27 9 6 4 T7670429 20707 0 00 7 00 4 6 4 6 /2 8 6 7 T767049 2074 0 00 2 00 6 8 6 8 /2 8 6 7 T7670449 2072 0 00 4 6 00 8 9 8 0 2 7 8 22 T767049 2078 0 00 22 0 00 2 2 2 /2 64 2 T7670479 2074 0 0 8 8 00 8 6 8 6 2 /4 70 6 0 T7670489 2072 0 0 28 00 4 9 4 9 /6 78 2 4 T7670499 80460 0 8 7 00 C B Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 8

f i t t i n g s M-4-ST, Wire Rope Clips (Stainless Steel) Standard Material: Forged Type 6 Stainless Steel Standard Finish: Electro-polish A C E D For Rope Dimensions Diameter Weight/ A Cat. UPC B C D E Clips Per 00 in. mm 02048 in. mm in. mm in. mm in. mm Fastening lb kg 8 640002 0940 2 4 9 6 4 4 9 4 9 2 4 2 6 64000 0948 4 6 4 9 7 8 22 8 29 2 0 4 6 640004 0942 6 8 2 8 29 8 2 8 8 Fittings 8 9 640006 0942 2 8 2 8 2 2 2 2 2 640008 09449 9 6 4 2 7 8 48 2 6 9 89 40 Shackles 46-S Round Pin Chain 999-G, A Safety Anchor Stainless Screw Pin Anchor 49-S, G Screw Pin Anchor 998-G Safety Chain Stainless Safety Anchor 422-G Screw Pin Chain Stainless Round Pin Anchor READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING SHACKLES. Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Use shackles only as indicated. Shackles must always be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted. Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 84

f i t t i n g s www.apexhandtools.com/campbell Campbell carbon and alloy shackles are all drop-forged. The pins and bolts are made of alloy steel. The shackles all meet the design requirements of Federal Specification RR-C-27, Type IV. Galvanizing is to ASTM A- specification. Campbell Stainless shackles are all drop-forged and made of Type 6 Stainless Steel, and have an electro-polished finish. IMPORTANT: Instructions For Use Shackles (continued). Do not exceed working load limit (WLL). See tables below. 2. The standard WLL given applies to in-line loading (perpendicular to the pin). When the loading is at an angle, the WLL is reduced as shown in the table below.. Any angular loads must be on the bow. All straight loading should be on the pin. WLL in Tons Campbell Carbon and Alloy Shackles In-Line Load 4 Load 90 Load Shackle, WLL WLL WLL in. mm ton kg ton kg ton kg 6 02 8 6 4 6 2 44 02 4 227 WLL in Lbs. Campbell Stainless Shackles In-Line Load 4 Load 90 Load Shackle, WLL WLL WLL in. mm lb kg lb kg lb kg 4 6 000 44 700 8 00 227 6 8 00 68 00 476 70 6 Fittings 6 8 4 680 2 44 02 8 0 2000 907 400 6 000 44 8 0 907 2 60 2 44 7 6 000 62 200 9 00 68 8 Alloy 0 2 84 20 907 2 4000 84 2800 270 2000 907 7 6 2 6 907 4 680 8 6 6000 2722 4200 90 000 62 2 2 84 20 907 2 Alloy 4 2948 2 27 2 6 8 6 4 2948 2 4 204 2 6 4 9 8000 629 600 240 4000 84 7 8 22 0000 440 7000 7 000 2268 2 2000 44 8400 80 6000 2722 4 9 4 4 409 024 2 27 4 Alloy 9 7 60 46 2 7 7 8 22 6 2 897 4 2 4082 4 2948 2 8 2 77 6 44 4 4 86 Alloy 2 2 2 8 8 4 796 6 4 668 8 29 9 2 868 6 2 6048 4 4 409 4 2 2 0886 8 760 6 44 4 Alloy 2 8 626 2 2 8 9 86 8 2 2247 9 2 868 6 4 62 2 8 7 422 7 8 077 8 2 77 2 Alloy 8 0 272 2 90 608 8 4 20 844 4 2700 0 9072 4 Alloy 44 40 6287 28 240 2 2 40 2 7 24 2 22226 7 2 876 2 Alloy 0 49 7 2 22679 2 2 64 4989 8 2 4926 27 2 24947 76 7 6808 2 2 47627 7 2 409 2 89 00 9078 70 602 0 49 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 8

s fh ia tc tki nl ge s 999, Anchor Shackles Bolt Type Drop-Forged Carbon Steel and Alloy Steel Standard Material: Shackle bodies are drop-forged carbon steel. Alloy shackles are all alloy steel Standard Finish self-colored or galvanized to meet ASTM A- specifications Working load limit permanently shown on every shackle Design Factor: 6 to 999-G, safety meets the design requirements of Federal Specification RR-C-27, Type IVA, Grade A, Class 999-G, Drop-Forged Carbon Steel Galvanized Fittings Working Tolerances Dimensions Weight/ Cat. UPC Load Limit Length Width B C D E F 00 in. mm 02048 ton kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm in. mm lb kg 4 6 904 96 2 44 6 2 6 2 6 8 8 29 2 2 2 2 20 6 7 0 8 0 906 970 907 8 6 2 7 6 7 6 7 2 2 7 2 2 6 24 0 4 2 908 0720 2 84 8 6 2 8 6 6 49 6 2 4 2 4 2 70 2 8 6 90 0744 4 2948 8 6 2 4 9 2 7 6 62 6 27 9 6 40 7 6 7 0 9 4 9 92 0768 4 4 409 4 6 6 2 7 8 22 2 6 7 4 2 6 46 4 44 200 9 7 8 22 94 0782 6 2 897 4 6 6 2 2 8 79 7 6 7 2 6 2 2 0 0 2 96 0760 8 2 77 4 6 6 2 8 29 4 9 6 4 2 2 64 2 8 60 00 227 8 29 98 *07629 9 2 868 4 6 6 2 4 2 4 4 08 6 46 2 6 7 2 8 67 70 22 4 2 920 0764 2 0886 4 6 6 2 8 4 2 4 2 4 8 76 000 44 8 922 07667 2 2247 4 6 8 2 8 4 2 4 7 2 89 4 8 00 90 2 8 924 0768 7 422 4 6 8 8 4 4 46 2 8 60 7 8 98 2 89 600 726 4 44 928 077 2 22680 4 6 8 2 7 78 2 7 8 7 4 4 2 4 02 280 294 2 92 07766 72 2 8 2 4 7 7 4 97 4 8 4 46 4 7 8 24 4000 86 2 2 64 940 07797 49896 2 8 2 4 70 0 9 6 268 4 8 0 7 4 84 2 40 9000 4086 * These items are made to order 999-A, Alloy Steel Galvanized Working Tolerances Dimensions Weight/ Cat. UPC Load Limit Length Width B C D E F 00 in. mm 02048 ton kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm in. mm lb kg 2 9089 8298 4 2948 8 6 2 8 6 6 49 6 2 4 2 4 2 70 2 4 9 929 820 7 60 4 6 6 2 7 8 22 2 6 7 4 2 6 46 4 44 200 9 2 969 822 2 2 40 4 6 6 2 8 29 4 9 6 4 2 2 64 2 8 60 00 227 4 2 9209 8229 8 629 4 6 6 2 8 4 2 4 2 4 8 76 000 44 2 8 9249 07698 0 2726 4 6 8 8 4 4 46 2 8 60 7 8 98 2 89 600 726 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 86

fs ih ta tc i nk gl es s www.apexhandtools.com/campbell Anchor Shackles Bolt Type (Imported) Type 6 Stainless Steel Standard Material: Forged Type 6 Stainless Steel Standard Finish: Electro-polish Imported Working Tolerances Dimensions Weight Cat. UPC Load Limit Length Width B C D E F Each in. mm 02048 lb kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm in. mm lb kg 6 8 640240 0982 00 90 6 2 6 2 8 0 4 2 7 2 27 2 2 4 9 0.6 0.07 8 9 6402406 09869 00 68 8 6 2 7 6 7 6 7 2 2 7 2 2 6 24 0.20 0.09 7 6 6402407 09876 2000 907 8 6 2 2 4 44 2 2 8 2 29 8 29 0.0 0.2 2 6402408 0988 000 62 8 6 2 8 6 6 49 6 2 4 2 4 2 0.72 0. 8 6 640240 09890 4000 84 8 6 2 4 9 2 7 6 62 6 27 9 6 40 7 6 7.8 0.6 4 9 640242 09906 6000 2722 4 6 6 2 7 8 22 2 6 7 4 2 6 46 4 44 2.22.0 Fittings 7 8 22 640244 099 8000 629 4 6 6 2 2 4 6 7 6 7 6 46 4 44 2.22.0 2 640246 09920 0000 440 4 6 6 2 8 29 4 9 6 4 2 8 4 2.28.49 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 87

s fh ia tc tki nl ge s 49, Anchor Shackles Screw Pin Drop-Forged Carbon Steel and Alloy Steel Standard Material: Shackle bodies are drop-forged carbon steel. Alloy shackles are all alloy steel Standard Finish self-colored or galvanized to meet ASTM A- specifications Working load limit permanently shown on every shackle Design Factor: 6 to 49-S, 49-G Screw Pin meets the design requirements of Federal Specification RR-C-27, Type IVA, Grade A, Class 2 49-S, Drop-Forged Carbon Steel Self Colored Fittings Working Tolerances Dimensions Weight/ Cat. UPC Load Limit Length Width B C D E F 00 in. mm 02048 ton kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm in. mm lb kg 4 6 4040 0764 2 44 6 2 6 2 6 8 8 29 2 2 2 2 20 6 7 0 6 8 400 07676 4 680 6 2 6 2 8 0 4 2 7 2 27 2 2 4 9 8 8 8 0 4060 076206 907 8 6 2 7 6 7 6 7 2 2 7 2 2 6 24 0 4 7 6 4070 07627 2 6 8 6 2 2 4 44 2 2 8 2 29 8 29 2 24 2 4080 076268 2 84 8 6 2 8 6 6 49 6 2 4 2 4 2 70 2 8 6 400 076282 4 2948 8 6 2 4 9 2 7 6 62 6 27 9 6 40 7 6 7 0 9 4 9 420 0760 4 4 409 4 6 6 2 7 8 22 2 6 7 4 2 6 46 4 44 200 9 7 8 22 440 07629 6 2 897 4 6 6 2 2 8 79 7 6 7 2 6 2 2 0 0 2 460 0764 8 2 77 4 6 6 2 8 29 4 9 6 4 2 2 64 2 8 60 00 227 8 29 480 07667 9 2 868 4 6 6 2 4 2 4 4 08 6 46 2 6 7 2 8 67 70 22 4 2 4200 0768 2 0886 4 6 6 2 8 4 2 4 2 4 8 76 000 44 8 4220 076404 2 2247 4 6 8 2 8 4 2 4 7 2 89 4 8 00 90 2 8 4240 076428 7 422 4 6 8 8 4 4 46 2 8 60 7 8 98 2 89 600 726 4 44 4280 07649 2 22680 4 6 8 2 7 78 2 7 8 7 4 4 2 4 02 280 294 2 420 07647 72 2 8 2 4 7 7 4 97 4 8 4 46 4 7 8 24 4000 86 2 2 64 4400 0760 49896 2 8 2 4 70 0 9 6 268 4 8 0 7 4 84 2 40 9000 4086 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 88

fs ih ta tc i nk gl es s www.apexhandtools.com/campbell 49, Anchor Shackles - Screw Pin continued Drop-Forged Carbon Steel Galvanized Working Tolerances Dimensions Weight/ Cat. UPC Load Limit Length Width B C D E F 00 in. mm 02048 ton kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm in. mm lb kg 6 40 0768 02 6 2 6 2 4 6 7 8 22 8 0 9 2 9 6 4 2 4 6 404 07669 2 44 6 2 6 2 6 8 8 29 2 2 2 2 20 6 7 0 6 8 40 07690 4 680 6 2 6 2 8 0 4 2 7 2 27 2 2 4 9 8 8 8 0 406 076220 907 8 6 2 7 6 7 6 7 2 2 7 2 2 6 24 0 4 7 6 407 0762 2 6 8 6 2 2 4 44 2 2 8 2 29 8 29 2 24 2 408 07627 2 84 8 6 2 8 6 6 49 6 2 4 2 4 2 70 2 8 6 40 076299 4 2948 8 6 2 4 9 2 7 6 62 6 27 9 6 40 7 6 7 0 9 4 9 42 0762 4 4 409 4 6 6 2 7 8 22 2 6 7 4 2 6 46 4 44 200 9 7 8 22 44 0766 6 2 897 4 6 6 2 2 8 79 7 6 7 2 6 2 2 0 0 2 46 0760 8 2 77 4 6 6 2 8 29 4 9 6 4 2 2 64 2 8 60 00 227 8 29 48 07674 9 2 868 4 6 6 2 4 2 4 4 08 6 46 2 6 7 2 8 67 70 22 4 2 420 07698 2 0886 4 6 6 2 8 4 2 4 2 4 8 76 000 44 8 422 0764 2 2247 4 6 8 2 8 4 2 4 7 2 89 4 8 00 90 2 8 424 0764 7 422 4 6 8 8 4 4 46 2 8 60 7 8 98 2 89 600 726 4 44 428 076466 2 22680 4 6 8 2 7 78 2 7 8 7 4 4 2 4 02 280 294 2 42 076480 72 2 8 2 4 7 7 4 97 4 8 4 46 4 7 8 24 4000 86 2 2 64 440 07627 49896 2 8 2 4 70 0 9 6 268 4 8 0 7 4 84 2 40 9000 4086 Fittings Anchor Shackles - Screw Pin Drop-Forged Carbon Steel Galvanized - Bagged, per Bag, 0 Bags per Carton Working Tolerances Dimensions Weight/ Cat. UPC Load Limit Length Width B C D E F Shelf Pack in. mm 02048 ton kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm in. mm lb kg 4 6 B9604 4928 2 44 6 2 6 2 6 8 8 29 2 2 2 2 20 6 7 2 0.9 6 8 B960 6687 4 680 6 2 6 2 8 0 4 2 7 2 27 2 2 4 9 2.7.2 8 0 B9606 4942 907 8 6 2 7 6 7 6 7 2 2 7 2 2 6 24 4.2.9 49, Anchor Shackles - Screw Pin 49-A, Alloy Steel - Galvanized Working Tolerances Dimensions Weight/ Cat. UPC Load Limit Length Width B C D E F 00 in. mm 02048 ton kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm in. mm lb kg 8 0 4069 826 2 84 8 6 2 7 6 7 6 7 2 2 7 2 2 6 24 0 4 2 4089 824 024 8 6 2 8 6 6 49 6 2 4 2 4 2 70 2 4 9 429 820 7 60 4 6 6 2 7 8 22 2 6 7 4 2 6 46 4 44 200 9 2 469 8267 2 2 40 4 6 6 2 8 29 4 9 6 4 2 2 64 2 8 60 00 227 4 2 4209 8274 8 60 4 6 6 2 8 4 2 4 2 4 8 76 000 44 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 89

s fh ia tc tki nl ge s Anchor Shackles Screw Pin (Imported) Industrial grade Forged steel Galvanized Design factor: to Working Load Limit shown on every shackle UPC tagged Working Dimensions Case Cat. UPC Load Limit A B C D E F Shelf Case Weight in. mm 02048 ton kg in. mm in. mm in. mm in. mm in. mm in. mm Pack Pack lb kg 6 6 T9640 2706 02 0.9 0.2 6 0.87 22 0.7 9 0.6 6 0.6 4 0 00 6 4 7 T96404 268 2 44 0.2 6 0. 8.2 28 0.0 0.78 20 0.69 8 0 00 6 8 T9640 2676 4 680 0.2 8 0.7 9.20 0 0.4 4 0.8 2 0.86 22 0 00 8 8 8 0 T96406 2669 907 0.8 0 0.4.44 7 0.67 7.00 2.0 27 0 00 2 4 Fittings 2 T96408 262 2 84 0.0 0.62 6.86 47 0.86 22.0.20 0 0 6 8 6 T9640 264 4 2948 0.62 6 0.7 9 2.44 62.06 27.6 40.44 7 2 8 7 4 20 T9642 262 4 4 409 0.7 9 0.87 22 2.80 7.0 2.00.8 47 6 7 8 22 T9644 268 6 2 897 0.87 22.00 2.20 8.4 6 2. 2.00 0 4 26 T9646 264 8 2 77.00 2.2 28.7 9.68 4 2. 6 2.7 60 26 2 Anchor Shackles Screw Pin Type 6 Stainless Steel Forged Type 6 Stainless Steel Electro-polished finish Imported Working Tolerances Dimensions Weight Cat. UPC Load Limit Length Width B C D E F Each in. mm 02048 lb kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm in. mm lb kg 4 6 640204 0964 000 44 6 2 6 2 6 8 8 29 2 4 9 6 7 0.0 0 6 8 64020 0966 00 90 6 2 6 2 8 0 4 2 7 2 27 2 2 4 9 0.6 0 8 0 640206 09678 00 68 8 6 2 7 6 7 6 7 2 2 7 2 2 6 24 0.20 0 7 6 640207 0968 2000 907 8 6 2 2 4 44 2 2 8 2 29 8 29 0.0 0 2 640208 09692 000 62 8 6 2 8 6 6 49 6 2 4 2 4 2 0.72 0 8 6 64020 09708 4000 84 8 6 2 4 9 2 7 6 62 6 27 9 6 40 7 6 7.0 4 9 64022 097 6000 2722 4 6 6 2 7 8 22 2 6 7 4 2 6 46 4 44 2.22 7 8 22 64024 09722 8000 629 4 6 6 2 2 8 79 7 6 7 2 8 4 2.28 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 90

fs ih ta tc i nk gl es s www.apexhandtools.com/campbell Standard Material: All shackle bodies are drop forged carbon steel. All pins are alloy steel Standard Finish: Galvanized to ASTM A- specification Working load limit permanently shown on every shackle Design Factor: 6 to Other Features: Meets Federal Specification TR-C-27 Type VII, Class 422-G Screw Pin meets the design requirements of Federal Specification RR-C-27, Type IVB, Grade A, Class 2 422, Chain Shackles-Screw Pin Drop-Forged Carbon Steel Working Tolerances Dimensions Weight/ Cat. UPC Load Limit Length Width B C D F 00 in. mm 02048 ton kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm lb kg 4 6 404 076909 2 44 6 2 6 2 6 8 7 8 22 2 2 6 7 6 8 40 07692 4 680 6 2 6 2 8 0 2 7 2 6 2 7 8 8 0 406 076947 907 8 6 2 7 6 4 2 2 2 7 6 24 0 4 2 408 07698 2 84 8 6 2 8 6 6 4 6 2 4 2 7 4 8 6 40 07700 4 2948 8 6 2 4 9 2 6 27 7 6 7 0 9 Fittings Standard Material: All shackle bodies are drop-forged carbon steel. All pins are alloy steel Standard Finish: Self-colored Working load limit permanently shown on every shackle Design Factor: 6 to Other Features: Meets Federal Specification RR-C-27 Type VII, Class 46-S Round Pin meets the design requirements of Federal Specification RR-C-27, Type IVB, Grade A, Class 46, Chain Shackles-Round Pin Drop-Forged Carbon Steel Working Tolerances Dimensions Weight/ Cat. UPC Load Limit Length Width B C D F 00 in. mm 02048 ton kg ±in. ±mm ±in. ±mm in. mm in. mm in. mm in. mm lb kg 6 8 4200 0768 4 680 6 2 6 2 8 0 2 7 2 6 2 7 8 8 0 42060 07672 907 8 6 2 7 6 4 2 2 2 7 6 24 0 4 7 6 42070 07696 2 6 8 6 2 2 2 8 2 2 8 8 29 46 2 2 42080 07669 2 84 8 6 2 8 6 6 4 6 2 4 2 7 4 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 9

f i th to i on kg s Hoist Hooks 00, 0-S, G, A Eye Hoist 0, 04-S, G, A Swivel Hoist READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING HOIST HOOKS. Campbell hoist hooks are all drop-forged and heat treated. All hooks are drilled for latch assembly. Galvanizing is to ASTM A specification. Fittings Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Use hoist hooks only as indicated. Never point load a hook. Do not use hooks for lifting personnel. Hooks must always be inspected for wear, distortion and damage before use. If worn, distorted or damaged, discard and replace. Do not weld on hooks. If a hook is exposed to weld spatter, discard that hook. Always stand clear of loads being lifted. IMPORTANT: Instructions For Use. For hooks with latches, the latch is only designed to retain slings and rigging attachments. The latch must not support the load. 2. Swivel hoist hooks are not designed to swivel under load.. Do not exceed working load limit (WLL). See table below. Working Load Limits Swivels Carbon Steel WLL Alloy WLL Ton kg Ton kg 2/22 4 680 907 /2 907 2 6 4/24 2 6 2 84 /2 2 84 2722 6/26 2 2 2268 4 629 7/27 2722 4 2 4082 8/28 4 629 2 4989 9/29 46 7 60 / 7 2 6804 9979 2 9 86 608 2 0 9072 608 4 608 22 998 *Item not manufactured Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 92

fh io tot ki ns g s www.apexhandtools.com/campbell 0, Swivel Hoist Hooks Standard Material: Drop-forged carbon steel or alloy and heat treated Standard Finish: Self-colored or galvanized to ASTM A- specification. Alloy hooks are painted orange Design Factor: to for carbon steel; 4 to for alloy steel Other Features: All hooks are drilled for latch kits Carbon Steel Galvanized Alloy Steel - Painted Orange Self Colored Working Working Weight Cat. UPC Cat. UPC Load Limit Cat. UPC Load Limit Each 02048 02048 ton kg 02048 ton kg lb kg 2 94020 0782 -- -- 4 680 902 0722 907 0.67. 4 94040 0780 -- -- 2 6 904 072277 2 84.6.7 9400 07874 -- -- 2 84 90 072284 2722 2.7.2 7 94070 079 -- -- 2722 907 07229 4 2 4082 4.8 2.2 9 94090 0799 -- -- 46 -- -- 7 60 9.6 4.4 940 07997 -- -- 7 2 6804 9 07207 9979.76 6.2 2 9420 *07207 -- -- 0 9072 92 0724 66 9.76 9.0 *These items are made to order Fittings A B C D E F S L R in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 2 2 2 4 2 76 2 7 8 22 8 0 2 40 4 8 4 2 2 64 4 2 2 8 9 6 90 8 29 2 2 7 8 8 8 4 76 8 4 4 44 4 02 4 2 8 29 8 6 8 9 2 20 6 9 6 67 7 2 89 4 44 2 4 6 2 7 2 9 6 4 9 9 7 6 240 8 20 9 4 2 4 2 4 7 2 2 64 6 2 64 6 49 8 4 2 2 2 8 9 6 246 8 4 2 4 70 8 79 7 2 2 96 2 6 9 2 4 2 8 2 292 2 8 4 2 8 67 8 79 7 6 98 2 6 9 2 8 4 4 2 6 2 407 2 4 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 9

f i th to i on kg s 04, Swivel Hoist Hooks Latched Standard Material: Drop-forged carbon steel or alloy and heat treated Standard Finish: Self-colored or galvanized to ASTM A- specification. Alloy hooks are painted orange Design Factor: to for carbon steel; 4 to for alloy steel Other Features: All hooks are drilled for latch kits Fittings Carbon Steel Galvanized Alloy Steel - Painted Orange Self Colored Working Working Weight Cat. UPC Cat. UPC Load Limit Cat. UPC Load Limit Each 02048 02048 ton kg 02048 ton kg lb kg 2 94220 0720 9422 072048 4 680 922 0722 907 0.67. 9420 0720 942 072062 907 92 0728 2 6 0.67. 4 94240 072079 9424 072086 2 6 924 0724 2 84.6.7 9420 07209 942 07209 2 84 92 0722 2722 2.7.2 7 94270 0720 9427 07247 2722 927 07269 4 2 4082 4.8 2.2 9 94290 07278 9429 0728 46 -- -- 7 60 9.6 4.4 -- -- -- -- -- -- 9 07276 9979.76 6.2 2 9420 07229 -- -- 0 9072 92 0728 66 9.76 9.0 A B C D E F S L R in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 2 2 2 4 2 76 2 7 8 22 8 0 2 40 4 8 2 2 64 4 2 2 8 6 8 6 27 2 2 2 6 8 68 4 4 2 2 64 4 2 2 8 9 6 90 8 29 2 2 7 8 8 8 4 76 8 4 4 44 4 02 4 2 8 29 8 6 8 9 2 20 6 9 6 67 7 2 89 4 44 2 4 6 2 7 2 9 6 4 9 9 7 6 240 8 20 9 4 2 4 2 4 7 2 2 64 6 2 64 6 49 8 4 2 2 2 8 9 6 246 8 4 2 4 70 8 79 7 2 2 96 2 6 9 2 4 2 8 2 292 2 8 4 2 8 67 8 79 7 6 98 2 6 9 2 8 4 4 2 6 2 407 2 4 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 94

fh io tot ki ns g s www.apexhandtools.com/campbell Standard Material: Drop-forged carbon steel or alloy and heat treated Standard Finish: Self-colored. Alloy hooks are painted orange Design Factor: to for carbon steel; 4 to for alloy steel Other Features: All hooks are drilled for latch kits 00, Eye Hoist Hooks-Regular Carbon Steel Self Colored Working Load Limit Alloy Steel Painted Orange Working Load Limit A B D E F G H K L R S in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 27 2 6 7 9 6 40 4 6 2 7 2 9 6 7 6 7 8 4 6 27 7 2 2 98 2 2 44 6 7 29 4 9 2 6 2 64 6 49 2 2 42 6 46 2 8 4 2 4 9 7 8 2 7 6 8 7 8 22 4 4 08 2 2 4 7 6 8 2 8 4 7 8 48 2 2 8 60 2 8 0 2 267 7 2 9 2 2 4 7 8 24 2 2 6 8 9 6 27 2 9 6 6 2 8 4 2 9 6 6 2 6 7 6 46 0 9 6 2 4 2 4 6 8 62 2 80 7 6 29 7 6 87 2 80 7 2 82 2 2 96 2 7 2 6 6 29 2 429 2 6 06 8 4 Weight Each Cat. UPC Cat. UPC 02048 ton kg 02048 ton kg lb kg 27 -- -- 2722 9227 07676 4 2 4082.0.9 29 9290 0726 46 9229 0768 7 60 7.0. 90 07294 7 2 6804 92 07690 9979 2.00.4 2 920 077 0 9072 922 07706 608 7.60 7.99 4 -- -- -- -- 924 077 22 998.0.94 Fittings Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 9

f i th to i on kg s 0, Eye Hoist Hooks Latched Standard Material: Drop-forged carbon steel or alloy and heat treated Standard Finish: Self-colored or galvanized to ASTM A- specification Alloy hooks are painted orange Design Factor: to for carbon steel; 4 to for alloy steel Other Features: All hooks are drilled for latch kits Fittings Carbon Steel Galvanized Alloy Steel - Painted Orange Self Colored Working Working Weight Cat. UPC Cat. UPC Load Limit Cat. UPC Load Limit Each 02048 02048 ton kg 02048 ton kg lb kg 22 9420 0779 942 0786 4 680 9242 07720 907.4.2 2 940 079 94 07409 907 924 0777 2 6.72. 24 9440 0746 944 0742 2 6 9244 07744 2 84.04.47 2 940 0740 94 07447 2 84 924 077 2722.4.66 26 9460 0744 946 0746 2 2 2268 -- -- -- -- 2.24.02 27 9470 07478 947 0748 2722 9247 07768 4 2 4082.0.9 28 9480 07492 -- -- 4 629 -- -- -- -- 4.90 2.22 29 9490 07 -- -- 46 9249 0777 7 60 7.0. 90 07 -- -- 7 2 6804 92 07782 9979 2.00.4 2 920 0777 -- -- 0 9072 922 07799 608 7.60 7.99 4 -- -- -- -- -- -- 924 0780 22 998.0.94 A B D E F G H K L R S in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 22 6 4 6 24 2 2 7 2 26 29 2 2 2 2 20 29 2 2 9 6 4 4 7 6 9 2 8 8 0 2 6 46 6 24 6 8 6 27 2 2 27 2 2 2 2 8 6 4 2 2 8 8 86 7 6 24 2 8 4 8 29 9 6 90 8 29 2 26 2 26 8 29 6 7 9 2 4 4 9 2 2 2 8 60 4 2 4 02 4 2 8 29 2 29 6 6 2 7 8 49 4 2 06 9 6 4 26 2 6 68 8 4 2 4 2 6 7 8 6 2 8 6 24 6 6 70 4 2 2 20 2 2 7 27 2 6 7 9 6 40 4 6 2 7 2 9 6 7 6 7 8 4 6 27 7 2 2 98 2 2 44 6 7 28 8 79 7 2 9 27 2 48 2 4 2 8 8 4 6 49 6 0 8 8 29 6 6 7 6 2 29 4 9 2 6 2 64 6 49 2 2 42 6 46 2 8 4 2 4 9 7 8 2 7 6 8 7 8 22 4 4 08 2 2 4 7 6 8 2 8 4 7 8 48 2 2 8 60 2 8 0 2 267 7 2 9 2 2 4 7 8 24 2 2 6 8 9 6 27 2 9 6 6 2 8 4 2 9 6 6 2 6 7 6 46 0 9 6 2 4 2 4 6 8 62 2 80 7 6 29 7 6 87 2 80 7 2 82 2 2 96 2 7 2 6 6 29 2 429 2 6 06 8 4 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 96

fh io tot ki ns g s www.apexhandtools.com/campbell 478-G Snap Hooks Standard Material: Drop-forged carbon steel heat treated Standard Finish: Galvanized to ASTM A- specification Design Factor: to Hook Packed Each Box of 0 Working Dimensions Weight A Cat. UPC Cat. UPC Load Limit B D L O R Each in. mm 02048 02048 lb kg in. mm in. mm in. mm in. mm in. mm lb kg 7 6 407 07496 4074 76722 70 40 4 9 2 7 6 62 4 6 0 2 2 7 4 8 28 2 9 6 4 409 074202 -- -- 000 44 8 29 2 2 7 /2 28 2 4 2 02 4 20 Standard Material: Drop-forged carbon steel Standard Finish: Blue Paint Finish Design Factor: to Other Features: Proof tested and certified Cargo Hooks, 48-S, (Portland Pattern) Fittings Working Dimensions Weight Cat. UPC Load Limit B D E L R Each 02048 ton kg in. mm in. mm in. mm in. mm in. mm lb kg 2 TF8992 96* 0 9072 7 2 9 7 78 4 44 2 7 8 27 8 8 29 4. 7 *These items are made to order. Sorting Hooks, 479-S Standard Material: Drop-forged alloy steel heat treated Standard Finish: Painted orange Design Factor: to Sorting hook available with handle for better control Handle not to be used for supporting load 8990 89900 Working Load Limit Dimensions Weight/ Cat. UPC Tip Bottom B L R O 00 02048 ton kg ton kg in. mm in. mm in. mm in. mm lb kg 89900 07072 2 84 7 2 6804 8 9 4 248 8 6 2 6 7 600 272 8990 9040 2 84 7 2 6804 8 9 4 248 8 6 2 6 7 62 277 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 97

l a tf ci th t ik ni gt s Latch Kits For Hooks 96-G Campbell Latch Kit 96-U Universal Latch Kit READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING HOOK AND LATCH. Fittings 96-G LATCH KIT FOR CAMPBELL HOOK IMPORTANT: Instructions For Use 96-U UNIVERSAL LATCH KIT FOR ALL MAJOR HOOK BRANDS. Always inspect the hook and latch before using. 2. Always make sure the spring forces the latch against the point of the hook.. Check the load before lifting to make sure the hook (not the latch) is supporting the load. 4. To assemble latches on hooks, follow instructions supplied with latch kit. Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Loads may disengage from hook if proper procedures are not followed. A falling load may cause serious injury or death. The load must never be supported by the latch. Latches must always be inspected for wear or damage before use. If worn, distorted or damaged, discard and replace. Always stand clear of loads being lifted. Campbell offers latches already assembled to the hook as well as kits for field installation. Universal kits fit Campbell as well as competitive hooks, including Crosby and Midland, that are drilled for latches Spring spacer adapts latch to hooks with narrow cam Bolt and nut permit fast, easy installation 96-G Kit Universal Kit Dimensions Weight/ Cat. UPC Cat. UPC A B C D E F R 00 in. mm 02048 02048 in. mm in. mm in. mm in. mm in. mm in. mm in. mm lb kg 4 6 2-22 9900 072727 9940 77088 2 2 8 9 6 4 4 2 8 6 4 6 4 6 2 4. 6 8-2 99020 07274 99402 7709 2 2 8 9 6 4 8 9 9 64 6 4 6 4 6 2 4.7 2 -- -- 4-24 9900 07274 9940 770 6 24 2 2 20 7 2 4 6 24 9 2 7 9 2 7 6 2 8 0-2 99040 07278 99404 778 6 24 2 2 20 6 4 6 24 9 2 7 9 2 7 6.6 -- -- 6-26 9900 07276 -- -- 6 24 2 2 20 2 0 6 24 9 2 7 9 2 7 6 6.2 7 6 7-27 99060 072772 9940 772 6 24 2 2 20 7 8 48 6 24 9 2 7 9 2 7 6 6. -- -- 8-28 99070 072789 -- -- 9 2 2 2 2 8 60 9 2 2 8 0 9 6 4 7 64 7 2 2 9-29 99080 072796 99406 772 9 2 2 2 2 6 68 9 2 2 8 0 9 6 4 7 64 7 6. 7 -- -- 0-0 99090 072802 -- -- 9 2 2 2 2 2 7 9 2 2 8 0 9 6 4 7 64 7 8.2 8 8 6-9900 07289 99407 7749 9 2 2 2 7 2 82 9 2 2 8 0 9 6 4 7 64 7 6 6 -- -- 2-2 990 072826 99408 776 2 7 2 9 7 6 87 8 4 9 6 4 2 2 8 8 0 2 24 -- -- 4 -- -- 99409 776 2 6 6 4 4 4 2 0 4 4 9 6 4 6 8 2 0 70.7 2 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 98

fs iw tit vie nlg s www.apexhandtools.com/campbell Swivels 272-G Eye & Eye 27-G Jaw & Eye READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING SWIVELS. IMPORTANT: Instructions For Use. These swivels are designed for a straight line pull only. 2. These swivels are not designed to swivel under load.. Do not exceed working load limit (WLL). See table below. Working Load Limits - Swivels Carbon WLL in. mm lb kg 4 6 80 86 6 8 20 68 8 0 220 022 2 600 64 Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Use swivels only as indicated. Swivels must always be inspected for wear, distortion and damage before use. If worn, distorted or damaged, discard and replace. Always stand clear of loads being lifted. Do not angle load. Fittings 8 6 200 26 4 9 7200 269 7 8 22 0,000 440 2 2,00 67 4 2 8,000 872 Campbell carbon swivels are all drop-forged and normalized. They meet the design requirements of Federal Specification RR-C-27. Galvanizing is to ASTM A specification. Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 99

fs i wt ti vi ne gl s 272-G, Eye & Eye Swivels Drop-Forged Carbon Steel Standard Material: Drop-forged carbon steel Standard Finish: Galvanized to ASTM A- specification Design Factor: to Other Features: Meets Federal Specification RR-C-27 Type VII, Class 2 Working Dimensions Weight/ Cat. UPC Load Limit A B C D L R 00 in. mm 02048 lb kg in. mm in. mm in. mm in. mm in. mm in. mm lb kg 4 6 604 06990 80 86 4 2 4 9 4 9 6 27 8 86 2 7 8 7. 7.0 6 8 60 06998 20 67 8 4 4 9 2 4 2 4 8 0 8 92 28. 2.9 Fittings 8 0 606 06992 220 02 2 2 4 2 2 8 27 4 4 08 9 26.8 2 608 06992 600 6 2 2 64 4 2 2 8 6 49 6 4 7 4 46 24 6. 8 6 60 069949 200 29 76 8 4 4 44 2 8 60 8 20 6 4 7 28 08. 4 9 62 06996 7200 266 2 89 4 44 2 2 2 64 8 4 222 7 4 84 6 6.7 7 8 22 64 06996 0000 46 4 02 2 8 4 2 4 7 6 78 0 8 264 8 4 222 68 27.9 2 66 069970 200 670 4 2 4 2 4 7 2 2 64 2 89 4 298 9 4 248 89 404. 4 2 620 069987 8000 86 8 4 4 8 8 79 7 8 98 6 4 2 292 627 78.7 Eye & Eye Swivels (Imported) Industrial grade Forged steel Galvanized Design factor: to UPC tagged Working Dimensions Weight/ Cat. UPC Load Limit S C D R Shelf Case 00 in. mm 02048 lb kg in. mm in. mm in. mm in. mm Pack Pack lb kg 6 6 T960 260 700 8 0.20 0.7 8 0.8 2 2.0 64 0 6 4 7 T9604 277 80 86 0.2 6 0.7 9.00 2.00 76 0 0 6 8 T960 284,20 67 0.2 8 0.97 2.22.0 89 0 9 9 8 0 T9606 29 2,20,02 0.44.20 0.4 4 4.20 07 2 7 8 2 T9608 2607,600,6 0. 4.4 7.88 48.44 8 2 6 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 00

fs iw tit vie nlg s & c l e v i s l i n k www.apexhandtools.com/campbell 27-G, Jaw & Eye Swivels Drop-Forged Carbon Steel - Galvanized Standard Material: Drop-forged carbon steel Standard Finish: Galvanized to ASTM A- specification Design Factor: to Other Features: Meets Federal Specification RR-C-27 Type VII, Class Working Dimensions Weight/ Cat. UPC Load Limit A B C K L N P R 00 in. mm 02048 lb kg in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lb kg 4 6 6404 069994 80 86 4 2 4 9 4 9 2 2 80 4 9 4 6 2 7 6 62 2 0 6 8 640 070006 20 67 8 4 4 9 2 2 4 9 6 2 6 8 2 7 8 7 2 8 0 6406 0700 220 02 2 2 4 2 6 7 4 8 7 6 27 8 0 2 89 7 2 2 6408 070020 600 6 2 2 64 4 2 2 8 4 9 6 8 6 8 2 4 6 9 22 8 6 640 07007 200 29 76 8 4 4 44 6 24 7 8 87 2 8 8 6 2 40 228 04 4 9 642 070044 7200 266 2 89 4 44 2 8 29 8 20 4 44 4 9 7 8 49 4 7 7 8 22 644 0700 0000 46 4 02 2 8 4 2 4 7 6 0 9 8 28 2 6 2 7 8 22 7 78 64 26 Fittings 2 646 070068 200 670 4 2 4 2 4 7 2 2 64 4 44 7 6 29 2 7 6 62 8 29 8 8 29 9 424 4 2 6420 07007 8000 86 8 4 4 8 8 79 2 6 2 2 0 2 6 7 8 8 7 6 24 6 70 Twin Clevis Link, 489-G Drop-forged Carbon Steel, Heat Treated Standard Material: Drop-forged carbon steel heat treated Standard Finish: Clevis and bolts are galvanized to ASTM A- specification cotter keys are stainless steel Design Factor: to Working Dimensions Pieces Weight/ Cat. UPC Load Limit A B C D Per 00 in. mm in. mm 02048 lb kg in. mm in. mm in. mm in. mm Box lb kg 4 7 6 8 6400 7978 900 769 7 6 6 27 2 2 64 8 0 0.6 2 8 0 - - 640 798 400 2449 2 6 2 27 2 72 7 6 0 6.0 7 6 2 6402 7992 9200 47 8 6 8 4 8 92 9 6 4.7 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 0

tfh iit mt bi nl ge s Thimbles 76-G Heavy Wire Rope Stainless Regular Wire Rope 8-G Manila Rope Stainless Heavy Wire Rope READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING THIMBLES. Campbell thimbles are all made of hot rolled, mild steel. They are all galvanized to ASTM A- Specification. Campbell stainless regular thimbles are made of type 04 stainless steel, while the stainless heavy thimbles are made of type 6 stainless. Fittings REGULAR WIRE ROPE THIMBLE HEAVY WIRE ROPE THIMBLE MANILA ROPE THIMBLE Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Thimbles must always be inspected for cracks and wear before use. If worn, distorted or damaged, discard and replace. Use thimbles only as indicated. The thimble size must exactly correspond to the diameter of the rope being used. Never use a smaller thimble, because it will pinch the rope and cause broken and/or displaced wires. IMPORTANT: Instructions For Use. A thimble is a wear pad that protects the rope from cuts and kinking. Always use an appropriate thimble when making an eye in a rope. 2. When it is necessary to open a thimble to insert a fitting, make sure the points are properly aligned when the thimble is closed. Inspect carefully for cracks.. Thimbles are not designed for load carrying purposes; therefore working load limits have not been established. Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 02

ft ih ti tm ibn lg es s www.apexhandtools.com/campbell Manila Rope Thimbles, 8-G Hot Rolled, Mild Steel Standard Material: Hot rolled, mild steel Standard Finish: Galvanized to ASTM A- specification Other Features: Meets design requirements of Federal Specifications FF-T-276B, Type For Rope Dia. Maximum Dimensions Weight/ Cat. UPC Pin Dia. A B C 00 in. mm 02048 in. mm in. mm in. mm in. mm lb kg 8 0 62600 09827 7 6 2 2 2 2 626002 0984 6 7 4 9 6 2 2 8 8 4 8 6 62600 0984 6 2 7 8 22 2 8 4 9 4 9 626004 0988 6 27 8 29 6 46 2 2 6 7 7 8 22 62600 0986 8 29 6 0 2 2 26 2 0 Standard Material: Forged Type 04 Stainless Steel Standard Finish: Electro-polish Regular Wire Rope Thimbles, Type 04 Stainless Steel Fittings Overall For Rope Dia. Weight/ Cat. UPC Thickness Length Inside Width 00 in. mm 02048 in. mm in. mm in. mm lb kg 8 640702 097 9 2 7 4 44 2 2 8 6 64070 0982 2 9 4 44 2 2 8 4 6 640704 0999 8 0 7 8 48 2 2 8 2 6 8 64070 0940 7 6 2 2 27 2 2 2 8 9 640706 0942 9 6 4 2 4 7 2 2 8 4 2 2 640708 09429 2 2 7 2 2 64 2 29 4 6 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 0

Heavy Wire Rope Thimbles, 76-G Hot Rolled, Mild Steel tfh iit mt bi nl ge s swivels Standard Material: Hot rolled, mild steel Galvanized Dimensions For Rope Dia. Weight/ Cat. UPC B C D F L P (pin) W 00 in. mm in. mm 02048 in. mm in. mm in. mm in. mm in. mm in. mm in. mm lb kg 4 6 - - 626020 097 8 4 7 8 22 9 2 7 6 2 2 8 4 6 2 2 8 7 6 8 - - 6260202 09728 7 8 48 6 27 8 0 64 2 2 2 64 6 24 6 46 2 8 0 - - 626020 097 2 8 4 8 29 7 6 7 64 76 6 27 2 8 4 2 0 7 6 - - 6260204 09742 2 4 7 4 2 2 8 6 78 6 0 2 8 60 27 2 2 9 6 4 626020 0979 2 4 70 2 8 8 6 9 64 4 8 92 7 6 7 2 6 68 49 22 Fittings 8 6 - - 6260206 09766 4 8 4 44 6 7 2 4 4 4 08 8 4 8 79 72 4 9 - - 6260207 0977 4 9 2 6 2 7 2 6 27 7 8 48 6 97 4 64 7 8 22 - - 6260208 09780 4 4 08 2 4 7 6 24 7 2 6 2 40 2 8 4 4 4 08 8 84 2 - - 6260209 09797 4 2 4 2 2 64 6 27 4 6 6 8 6 2 8 60 4 6 2 00 6 8 29 4 29 626020 0980 8 0 2 7 8 7 6 4 6 7 78 2 4 70 7 8 49 68 67 8 2 8 62602 0980 6 4 9 2 89 9 6 40 2 9 229 8 86 7 8 8 24 Heavy Wire Rope Thimbles, Type 6 Stainless Steel Standard Material: Type 6 Stainless Steel Standard Finish: Electro-polish Overall For Rope Dia. Weight/ Cat. UPC Thickness Length Inside Width 00 in. mm 02048 in. mm in. mm in. mm lb kg 4 6 6407604 0946 2 0 2 6 6 7 8 22 7. 6 8 640760 0944 2 2 2 64 6 27 4 6 8 9 6407606 0940 2 2 7 2 7 8 7 8 29 2 2 2 6407608 09467 27 2 2 8 92 2 8 2 8 640760 09474 2 4 4 08 4 44 7 4 4 9 640762 0948 4 2 27 2 47 67 Note: Thimbles are not designed for load carrying purposes; therefore, working load limits have not been established. Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 04

tf ih ti tm ibn lg es s www.apexhandtools.com/campbell swivels & clevis link Slip-Thru Thimbles, 74-S Hot Rolled, Mild Steel Standard Material: Hot rolled, mild steel Standard Finish: Painted blue For Rope Dia. Weight/ Cat. UPC 00 in. mm in. mm 02048 lb kg 7 6 2-9 6-4 626402 09276 2 7 4 8 6 4 9 62640 0928 2 07 4-Spec 8 6 4 9 626404 09290 29 4 Dimensions B C D F L P (max pin dia.) R W Style in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 4 7 8 24 2 4 7 6 7 2 4 6 2 6 2 6 6 2 4 2 4 4 7 8 49 2 9 6 6 6 2 /64 4 8 6 208 2 2 64 6 0 8 0 4-Spec 7 8 94 8 92 6 2 6 9 6 22 9 6 90 6 0 6 8 62 Fittings Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 0

f i t tl i n kg s 82-S, G, A Weldless Sling Links READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING THESE LINKS. Fittings SLING LINK Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Use links only as indicated. Links must always be inspected for wear and distortion before use. If worn, distorted or damaged, discard and replace. Do not weld on these links. Always stand clear of loads being lifted. Campbell links are all drop-forged and heat treated. Galvanizing is to ASTM A- specification. IMPORTANT: Instructions For Use. Make sure the link has a working load limit compatible with that of the chain or wire rope with which it is used. 2. Do not exceed WLL See table below.. The WLL can be significantly reduced under the following conditions: Wear and/or Distortion Extreme Heat Weld Spatter If link is exposed to any of these conditions, discard it. Working Load Limits (lb and kg) - Links Sling Link Carbon Alloy WLL WLL in. mm lb kg lb kg 8 0 600 726 2600 80 2 2900 7 4000 86 8 6 4200 907 800 26 4 9 6000 2724 8200 72 7 8 22 800 768 -- -- 2 0800 490 -- -- 82-S, 82-G, 82-A Weldless Sling Links Standard Material: Drop-forged steel, heat treated Design Factor: 6 to Carbon Steel, Heat Treated Blue Painted Galvanized Working Dimensions Weight Cat. UPC Cat. UPC Load Limit A B C Each in. mm 02048 02048 lb kg in. mm in. mm in. mm lb kg 8 0 62 06970 62 06970 600 726 2 4 7 2 8 4 9..4 2 622 069727 622 06974 2900 76 2 2.6.27 8 6 62 06974 62 06978 4200 90 4 9 2 2 64 4 2..0 4 9 624 06976 624 069772 6000 2722 4 2 4 76 2 8.9.86 7 8 22 62 069789 62 069796 800 76 4 2 89 4 44 2.9.2 2 626 069802 626 06989 0800 4899 6 2 4 02 2 4.4 2.00 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 06

fl i tn tk is n g s www.apexhandtools.com/campbell 82-S, 82-G, 82-A Weldless Sling Links, continued Standard Material: Drop-forged steel, heat treated Design Factor: 6 to Alloy, Orange Painted Orange Painted Working Dimensions Weight Cat. UPC Load Limit A B C Each in. mm 02048 lb kg in. mm in. mm in. mm lb kg 8 0 626 069826 2600 80 2 4 7 2 8 4 9..4 2 6262 0698 4000 84 76 2 2.6.27 8 6 626 069840 800 26 4 9 2 2 64 4 2..0 4 9 6264 06987 8200 720 4 2 4 76 2 8.9.86 Fittings Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 07

efy ie tbt oi nl gt s Eyebolts, 46-G Regular Nut READ AND UNDERSTAND THESE S AND INSTRUCTIONS AND FOLLOW ALL EYEBOLT SAFETY INFORMATION PRESENTED HERE BEFORE USING EYEBOLT ASSEMBLIES. Fittings Campbell carbon steel eyebolts are all drop-forged and normalized. Galvanizing is to ASTM A- specification. IMPORTANT: Instructions For Use. Make sure the eyebolt is properly seated by screwing it down completely and tightening the nut securely against the load. 2. An eyebolt must be installed into a tapped hole with a minimum depth of two times the shank diameter.. Make sure the threads on the shank and in the hole are clean and undamaged. 4. Loads must always be applied parallel to the plane of the eye and never across the plane of the eye. Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Loads may slip or fail if proper eyebolt assembly and lifting procedures are not used. A falling load can seriously injure or kill. Eyebolts must always be inspected for wear and distortion before use. If worn, distorted or damaged, discard and replace. Do not use regular nut eyebolts for angular lifting. Never machine, cut or grind an eyebolt. Always stand clear of loads being lifted.. Always lift the load with a steady, even pull. Do not shock load. 6. Do not exceed working load limit (WLL). See table below. The standard WLL s are established for a vertical pull. 7. When using lifting slings having two or more legs, make sure the load on each leg is calculated based on the angular loading. The shoulder nut eyebolt with the correct WLL under those conditions must be used. For angular loading, a shoulder nut eyebolt must be used. 8. Use only the heavy hex nuts supplied with the eyebolts. Effect of Angular Loading on WLL of Carbon Steel, Shoulder Nut Eyebolts Shank Dia. Vertical Pull WLL 7 Pull WLL 60 Pull WLL 4 Pull WLL in. mm lb kg lb kg lb kg lb kg 8 0 20 68 68 4 97 0 4 Less Than 4 Pull 2 220 68 2 6 78 6 60 24 NOT RECOM- 8 6 600 64 980 899 260 72 900 409 MENDED 4 9 200 26 2860 298 820 826 00 90 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 08

fe iy te tb i on gl ts s & p a d e y e s www.apexhandtools.com/campbell Standard Material: Drop-forged carbon steel Working load limits apply only to eyebolts in lifting or pulling applications Galvanizing to ASTM A- specification Note: If angular loading is necessary, eyebolts are to be used at reduced loads (see illustration) 46-G Nut Eyebolts, Galvanized 46-G Regular Nut Shank Dimensions Regular Working Dimensions Weight/ Dia. Length Cat. UPC Load Limit A B Thread Length 00 in. mm in. mm 02048 lb kg in. mm in. mm in. mm lb kg 8 0 4 2 4 7006 00789 20 67 4 9 2 8 2 2 64 27 2 2 8 0 6 2 7007 00796 20 67 4 9 2 8 76 2 2 4 8 7008 00802 220 02 2 2 2 8 4 2 2 6 2 7009 0089 220 02 2 2 76 68 4 2 0 24 70 008 220 02 2 2 76 88 40 2 2 0 702 00840 220 02 2 2 4 02 00 4 8 6 6 2 704 00864 600 6 4 2 2 2 64 76 20 4 8 6 8 20 70 0087 600 6 4 2 2 2 64 76 9 Fittings 8 6 0 24 706 00888 600 6 4 2 2 2 64 76 2 69 8 6 2 0 707 0089 600 6 4 2 2 2 64 4 02 68 76 4 9 6 2 709 0098 200 29 2 8 76 76 90 86 4 9 8 20 7020 0092 200 29 2 8 76 76 208 94 4 9 0 24 702 0092 200 29 2 8 76 76 20 04 4 9 2 0 7022 00949 200 29 2 8 76 4 02 2 6 4 9 8 702 0096 200 29 2 8 76 27 290 2 Uses: Widely used on farm machinery, trucks, steel hulled marine vessels and material handling equipment Standard Material: Drop-forged C-08 carbon steel Standard Finish: Self-colored 20-S, Pad Eyes, Carbon Steel Dimensions Weight/ Cat. UPC A B C D E F G 00 in. mm 02048 in. mm in. mm in. mm lb kg 2 8 700 00697 2 4 8 29 8 6 2 4 9 6 4 6 8 4 2 7002 0070 6 2 8 4 9 6 27 7 8 22 8 4 8 0 7 8 4 02 700 0070 4 6 2 8 4 2 7 6 7 4 2 2 6 9 9 6 4 0 2 27 7004 00727 6 24 2 8 67 4 2 /4 44 9 6 40 2 7 8 7 6 7 9 42 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 09

l i f t i n g e y e s & efy ie t tni nu gt s Lifting Eyes & Eye Nuts READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING LIFTING EYES AND NUTS. Fittings STAINLESS EYE NUT LIFTING EYE Campbell carbon eye nuts are all drop-forged and normalized. Galvanizing is to ASTM A- specification. IMPORTANT: Instructions For Use. Do not exceed working load limit (WLL) as shown in the table below. The standard WLL s are established for a vertical pull. The WLL is significantly reduced when angular loading is involved as shown in the table below. 2. When using lifting slings having two or more legs, make sure the load on each leg is calculated based on the angular loading. The eye nut with the correct WLL under those conditions must be used.. Make sure the eye nuts are properly seated by screwing them down completely. 4. Make sure the threads in the hole are clean and undamaged. Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Loads may slip or fail if proper assembly and lifting procedures are not used. Use lifting eyes and eye nuts only as indicated. Lifting eyes and eye nuts must always be inspected for wear, distortion and damage before use. If worn, distorted or damaged, discard and replace. Always stand clear of loads being lifted. Eye Nut Tap WLL (lb and kg) of Carbon Eye Nuts Vertical Pull WLL 7 Pull WLL 60 Pull WLL 4 Pull WLL in. mm lb kg lb kg lb kg lb kg, A 6 8 80 86 46 2 29 4 20 9 2 8 0 20 67 68 4 97 0 4 7 6 60 748 90 4 7 26 40 86, A 2 220 02 2 6 78 6 60 24 6 7 8 22 7200 266 960 798 220 44 800 87 8 4 2 200 689 860 79 20 24 800 72 0 2 8 2400 9707 770 44 7490 400 0 2429 Less Than 4 Pull NOT RECOM- MENDED. Loads must always be applied parallel to the plane of the eye and never across the plane. 6. Always stand clear of the load and lift the load with a steady, even pull. Do not shock load. WLL (lb and kg) of Stainless Steel Lifting Eyes Eye Nut Tap Vertical Pull WLL 7 Pull WLL 60 Pull WLL 4 Pull WLL in. mm lb kg lb kg lb kg lb kg 2 20 976 80 6 70 4 24 Less Than 4 Pull 6 8 6 440 62 890 88 200 4 860 90 NOT RECOM- 7 4 9 40 24 282 28 79 8 28 8 MENDED 9 2 970 424 0 28 27 487 240 062 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 0

fp ia td t ien yg es s & e y e n u t s www.apexhandtools.com/campbell Lifting Eyes, M-4-ST Drop-forged Type 6 Stainless Steel Standard Material: Forged Type 6 Stainless Steel Standard Finish: Electro-polish Working Weight Cat. UPC Load Limit Each 02048 lb kg lb kg 640704 0920 20 97.2. 6 64070 097 440 60.66.0 7 640706 0944 40 22.86.9 9 640707 09 970 420.82.8 D L A C B T in. mm in. mm in. mm in. mm in. mm in. mm 2 4 9 2 0 2 2 8 6 6 8 6 2 2 2 64 4 2 8 6 4 9 7 4 9 2 2 6 7 2 8 2 2 7 7 8 22 9 2 7 6 7 9 6 90 6 46 7 8 22 6 27 Eye Nuts, 776-G Drop-forged Carbon Steel, Normalized Standard Material: Drop-forged carbon steel normalized Standard Finish: Galvanized to ASTM A- specification Design Factor: to Working Tap M Weight/ Cat. UPC Load Limit UNC-2B 00 02048 lb kg in. mm lb kg A 70002 004 80 86 6 8 8 4 2 7000 00420 20 67 8 0 6 70004 0047 60 748 7 6 2 A 7000 00444 220 02 2 2 4 70006 004 600 6 8 6 2 70007 00468 200 29 4 9 6 70008 0047 7200 266 7 8 22 69 7 70009 00482 0000 46 2 27 2 8 700 000 200 689 4 2 6 6 0 7002 002 2400 9707 2 8 66 298 Fittings A C D E F G S T in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm A 4 2 4 9 6 27 9 2 2 2 9 4 6 2 2 42 2 8 4 2 7 64 2 4 9 9 6 4 2 2 6 8 2 64 2 2 4 2 2 8 2 6 2 9 2 8 0 2 2 6 A 2 4 2 2 8 2 6 2 9 2 8 0 2 2 6 4 2 2 64 2 8 2 2 6 0 2 4 9 2 9 2 8 76 4 44 2 7 6 62 7 6 6 4 2 7 8 22 8 6 6 00 6 2 89 2 2 9 6 6 8 4 8 2 4 9 4 6 0 7 4 00 2 4 6 6 7 6 48 8 4 4 2 7 8 22 6 0 8 4 2 4 2 2 64 2 89 2 8 4 6 46 6 2 6 48 0 8 4 8 79 4 6 0 2 2 64 2 4 7 2 8 4 2 6 6 7 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.

t u r n bf iu tc tki nl ge s Turnbuckles 778-G Hook & Eye 780-G Eye & Eye 786-G Jaw & Eye M-6-ST Stainless Jaw & Jaw 788-G Jaw & Jaw READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING TURNBUCKLES. IMPORTANT: Instructions For Use HOOK & EYE EYE & EYE. Turnbuckles are designed for a static load and are typically used with guy wires. 2. Do not exceed working load limit (WLL). See table below. Working Load Limits (lb and kg) of Turnbuckles Fittings JAW & EYE JAW & JAW Carbon Eye & Eye Jaw & Eye Jaw & Jaw Stainless Eye & Eye Jaw & Eye Jaw & Jaw Carbon Hook & Hook Hook & Eye Turnbuckle in. lb kg lb kg lb kg 4 x 4 00 227 00 227 400 82 6 x 4 2 800 6 800 6 700 8 8 x 6 200 4 200 4 000 44 Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Use turnbuckles only as indicated. Turnbuckles must always be inspected for wear, distortion, cracks and damage before use. If worn, distorted or damaged, discard and replace. Turnbuckles are not designed for angular loading, so the loading must be applied in a straight line. Campbell carbon turnbuckles are all drop-forged and meet the design requirements of Federal Specification ASTM F-4, Type, Grade. All types, except stubend, are galvanized to ASTM A specifications. Campbell stainless turnbuckles are all drop-forged, made of type 6 stainless steel, and have an electropolished finish. 2 x 6, 9, 2 2200 999 2200 999 00 68 8 x 6, 9, 2, 8 00 89 00 89 200 044 4 x 6, 9, 2, 8, 24 200 26 200 26 000 62 7 8 x 2, 8 7200 269 * * 600 64 x 6, 2, 8, 24 0000 440 0000 440 4200 907 4 x 2, 8, 24 200 690 * * 000 2270 *Item not manufactured. Stub End Turnbuckles are not rated. The rating is only as good as the weld or connection method. LOCK NUT 4. In loads where there is vibration, lock nuts (jam nuts) should be used to prevent the connection from turning or loosening.. The jaw ends come with different hardware depending on their size. Jaws from /4 through /8 have a hex head bolt and nut. Jaws from /4 through /2 have cotter key and bolt. Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 2

ft iu tr tn i nb gu sc k l e s www.apexhandtools.com/campbell Hook & Eye Turnbuckles, 778-G Drop-forged Carbon Steel Standard Material: Drop-forged carbon steel Standard Finish: Galvanized to ASTM A- specification Design Factor: to Other Features: Meets design requirements of ASTM F4, Type, Grade, Class F Cat. UPC 02048 Working Load Limit Dimensions A (Thread Dia.) B (Take Up) (Closed Position) W (Length) Weight/ 00 lb kg in. mm in. mm in. mm lb kg 6200 08664 400 8 4 6 4 02 7 6 98 29 62002 0867 700 8 6 8 4 2 4 9 8 28 47 2 6200 08688 000 44 8 0 6 2 8 29 8 9 6200 0869 00 680 2 6 2 8 60 7 62006 08660 00 680 2 9 229 6 8 40 226 0 62007 08668 00 680 2 2 0 9 8 486 24 620 086649 200 04 8 6 2 0 20 9 6 22 7 68 Eye & Eye Turnbuckles, 780-G Drop-forged Carbon Steel Fittings Standard Material: Drop-forged carbon steel Standard Finish: Galvanized to ASTM A- specification Design Factor: to Other Features: Meets design requirements of ASTM F4, Type, Grade, Class D (Closed Pos.) Dimensions Weight/ Working (Dia.) (Take Up) (Length) 00 Cat. UPC Load Limit A B W E G H J 02048 lb kg in. mm in. mm in. mm in. mm in. mm in. mm in. mm lb kg 62002 08709 800 6 6 8 4 2 4 9 7 6 240 2 2 2 9 2 7 6 24 4 20 6200 087066 200 44 8 0 6 2 6 00 2 2 60 9 6 4 2 9 8 29 84 8 6200 08707 2200 998 2 6 2 7 6 4 2 2 7 4 9 7 6 7 6 7 6 7 62006 087080 2200 998 2 9 229 6 7 6 48 2 2 7 4 9 7 6 7 6 7 98 90 62007 087097 2200 998 2 2 0 9 7 6 494 2 2 7 4 9 7 6 7 6 7 246 2 62009 0870 00 88 8 6 6 2 4 7 8 78 2 89 29 2 2 2 4 44 26 6 6200 0870 00 88 8 6 9 229 7 7 8 44 2 89 29 2 2 2 4 44 0 4 620 08727 00 88 8 6 2 0 20 7 8 0 2 89 29 2 2 2 4 44 0 9 620 0874 200 29 4 9 6 2 6 4 42 4 4 08 2 26 8 6 2 8 4 80 7 6204 0878 200 29 4 9 9 229 9 4 02 4 4 08 2 26 8 6 2 8 4 48 208 620 0876 200 29 4 9 2 0 22 4 78 4 4 08 2 26 8 6 2 8 4 74 26 6206 08772 200 29 4 9 8 47 28 4 70 4 4 08 2 26 8 6 2 8 4 700 8 62024 087240 0000 46 2 24 60 8 2 978 4 46 2 7 7 8 22 76 600 726 62028 087264 200 689 4 2 8 47 8 899 7 78 27 2 47 8 29 9 6 90 200 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.

t u r n bf iu tc tki nl ge s Jaw & Jaw Turnbuckles, 788-G Drop-forged Carbon Steel Standard Material: Drop-forged carbon steel Standard Finish: Galvanized to ASTM A- specification Design Factor: to Other Features: Meets design requirements of Federal Specification ASTM F4, Type, Grade, Class G Jaws on sizes /4 through /8 have hex head bolt and nut. Jaws on sizes /4 through -/2 have cotter key and bolt Fittings Cat. UPC 02048 Working Dimensions (Closed Position) Weight/ Load Limit Thread Dia.(A) Take Up (B) Length 00 lb kg in. mm in. mm in. mm lb kg 6200 087646 00 227 4 6 4 02 7 6 202 6 62002 0876 800 6 6 8 4 /2 4 9 6 27 2 6200 087660 200 44 8 0 6 2 6 284 94 4 6200 087677 2200 998 2 6 2 2 4 24 70 77 62006 087684 2200 998 2 9 229 4 400 2 98 62007 08769 2200 998 2 2 0 8 4 476 26 20 6200 08774 00 88 8 6 9 229 7 4 4 49 8 620 08772 00 88 8 6 2 0 20 4 27 400 82 620 08774 200 29 4 9 6 2 4 400 44 20 6204 08772 200 29 4 9 9 229 8 4 476 8 2 620 087769 200 29 4 9 2 0 2 4 2 6 287 6206 087776 200 29 4 9 8 47 27 4 70 760 4 6209 087790 7200 266 7 8 22 2 0 2 8 94 87 80 62020 087806 7200 266 7 8 22 8 47 29 8 746 208 48 6202 0878 0000 46 2 6 2 9 7 6 494 947 40 62022 087820 0000 46 2 2 0 2 7 6 646 290 86 6202 08787 0000 46 2 8 47 7 6 799 60 708 62024 087844 0000 46 2 24 60 7 7 6 9 78 80 62027 0878 200 689 4 2 2 0 27 2 699 240 972 62028 087868 200 689 4 2 8 47 2 8 260 62 62029 08787 200 689 4 2 24 60 9 2 00 00 407 620 087899 2400 9707 2 8 8 47 7 4 946 700 680 6204 6890 2400 9707 2 8 24 60 4 4 099 400 86 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 4

ft iu tr tn i nb gu sc k l e s www.apexhandtools.com/campbell Jaw & Jaw Turnbuckles, 788-G Drop-forged Carbon Steel Cat. Dimensions D H K L M Q P in. mm in. mm in. mm in. mm in. mm in. mm in. mm 6200 9 2 40 8 6 2 0 6 2 2 4 6 4 6 62002 6 49 6 7 2 6 2 4 6 4 9 6200 2 2 2 7 8 22 2 4 6 9 6 4 6 8 6 2 6200 2 8 67 6 0 8 6 6 8 4 9 8 0 6 27 62006 2 8 67 6 0 8 6 6 8 4 9 8 0 6 27 62007 2 8 67 6 0 8 6 6 8 4 9 8 0 6 27 6200 8 86 8 4 9 7 6 6 24 2 8 620 8 86 8 4 9 7 6 6 24 2 8 620 4 9 6 46 6 24 2 2 6 0 8 6 2 8 6204 4 9 6 46 6 24 2 2 6 0 8 6 2 8 620 4 9 6 46 6 24 2 2 6 0 8 6 2 8 6206 4 9 6 46 6 24 2 2 6 0 8 6 2 8 6209 4 8 2 8 29 9 2 8 4 9 4 44 62020 4 8 2 8 29 9 2 8 4 9 4 44 6202 7 2 2 6 6 6 0 4 9 9 6 40 7 8 22 2 6 2 62022 7 2 2 6 6 6 0 4 9 9 6 40 7 8 22 2 6 2 Fittings 6202 7 2 2 6 6 6 0 4 9 9 6 40 7 8 22 2 6 2 62024 7 2 2 6 6 6 0 4 9 9 6 40 7 8 22 2 6 2 62027 6 6 4 2 7 8 7 4 44 7 8 22 2 8 29 2 7 6 62 62028 6 6 4 2 7 8 7 4 44 7 8 22 2 8 29 2 7 6 62 62029 6 6 4 2 7 8 7 4 44 7 8 22 2 8 29 2 7 6 62 620 8 2 26 4 8 2 6 2 2 28 2 6 9 8 2 6 7 6204 8 2 26 4 8 2 6 2 2 28 2 6 9 8 2 6 7 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.

t u r n bf iu tc tki nl ge s Jaw & Jaw Turnbuckles, M-6-ST Drop-forged Type6 Stainless Steel D C E Standard Material: Forged Type 6 Stainless Steel Standard Finish: Electro-polish A B Fittings Cat. UPC 02048 Dimensions (Closed Pos.) Working (A) Take Up (B) Length (C) Pin Dia. (D) Jaw Openning (E) Weight Each Load Limit in. mm in. mm in. mm in. mm in. mm lb kg lb kg 64020 0946 8 0 6 2 0 4 27 6 8 9 6 4 4 0. 200 4 640204 0946 2 6 2 2 0 8 9 8 6 2 0.7 2200 999 64020 09487 4 9 6 2 2 94 8 6 2 2.2 200 26 Jaw & Eye Turnbuckles, 786-G Drop-forged Carbon Steel Cat. UPC 02048 See Figure 780-G for eye dimensions See Figure 788-G for jaw dimensions Drop-forged Carbon Steel Galvanized to ASTM A- specifications Design factor to Working Dimensions (Closed Position) Weight/ Load Limit Thread Dia.(A) Take Up (B) Length (W) 00 lb kg in. mm in. mm in. mm lb kg 62040 08787 00 227 4 6 4 02 7 7 8 200 620402 08794 800 6 6 8 4 2 4 9 8 28 48 22 62040 087400 200 44 8 0 6 2 9 6 294 90 4 62040 08747 2200 998 2 6 2 8 64 74 620406 087424 2200 998 2 9 229 6 8 40 208 94 620407 0874 2200 998 2 2 0 9 8 486 27 7 620409 087448 00 88 8 6 6 2 4 7 8 78 26 20 6204 087462 00 88 8 6 2 0 20 6 29 80 7 620422 0876 0000 46 2 2 0 26 660 206 48 620427 08792 200 689 4 2 2 0 28 9 6 72 980 899 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 6

fc io tnt ni ne gc st i n g l i n k s www.apexhandtools.com/campbell Connecting Links 72-S, G, A Regular 7-S Pear Shaped Stainless Regular READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING CONNECTED LINKS. Campbell carbon and alloy steel connecting links are all drop-forged and heat treated. Galvanizing is to ASTM A- specification. REGULAR CONNECTING LINK PEAR SHAPED CONNECTING LINK Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Use connecting links only as indicated. Do not use connecting links for overhead lifting. Never re-use connecting links. Connecting links must always be inspected for wear, distortion and tightness before use. If worn, distorted or damaged, discard and replace. Campbell stainless connecting links are all drop-forged and made of 6 Stainless Steel, and have an electropolished finish. Connecting links are used to connect two pieces of chain or to connect a fitting to a chain. IMPORTANT: Instructions For Use. Make sure the connecting link used is the same size as the components being joined, e.g., a /8 in. connecting link is used with /8 in. chain. 2. To effectively close the connecting link, peen the prongs (using a ball peen hammer) to fill the hole of the mating half as much as possible. Fittings Working Load Limits (lbs and kg) - Connecting Links Regular Pear Shaped Carbon Steel WLL Alloy WLL Carbon Steel WLL in. mm lb kg lb kg lb kg 4 6 400 66 * * 6 8 2000 908 000 62 * 8 0 2800 27 4200 907 80 840 2 470 27 7000 78 00 498 8 6 720 292 0800 490 000 2270 4 9 020 464 000 680 700 22 7 8 22 -- -- -- -- 9600 48 2 00 707 -- -- * *Item not manufactured.. Any assembly made using connecting links should be rated at the working load limit (WLL) of the weakest component. 4. Do not exceed WLL. See table below.. The WLL of connecting links is based on a straight line pull. Any side or shock loading will significantly reduce the actual WLL. Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 7

72-S, 72-G, 72-A Connecting Links, Carbon Steel and Alloy Steel c o n n e c t i nf g i t tl i n kg s Standard Material: Forged carbon and alloy steel - Heat Treated Standard Finish: Self-colored or galvanized Design Factor: 4 to For effective closure peen to fill eye of mating half as much as possible Meets design requirements of Federal Specification RR-C-27D, Type II Carbon Steel, Heat Treated Self Colored Galvanized Working Dimensions Links Weight/ Cat. UPC Cat. UPC Load Limit A B C D Per 00 in. mm 02048 02048 lb kg in. mm in. mm in. mm in. mm Box lb kg 4 6 200404 074677 20044 074684 400 6 2 2 8 7 6 7 8 22 0 6 6 8 20004 07469 2004 074707 2000 907 6 0 4 44 2 2 0 0 Fittings 8 0 200604 07474 20064 07472 2800 270 8 2 8 4 9 6 4 8 29 0 8 8 2 200804 07472 20084 074769 470 2 2 2 44 2 6 68 2 2 7 7 6 7 0 8 7 8 6 20004 074790 2004 074806 720 289 2 8 4 8 86 6 2 7 8 48 0 72 4 9 - - 2024 074820 020 4649 2 2 64 7 8 98 2 2 2 8 4 2 Alloy Steel, Heat Treated Self Colored Working Dimensions Links Weight/ Cat. UPC Load Limit A B C D Per 00 in. mm 02048 lb kg in. mm in. mm in. mm in. mm Box lb kg 8 0 20860 0708 4200 90 8 2 8 4 9 6 4 8 29 0 8 8 2 20880 0702 7000 7 2 2 44 2 6 68 2 2 7 7 6 7 0 8 7 8 6 20900 07049 0800 4899 2 8 4 8 86 6 2 7 8 48 0 72 4 9 20920 0706 000 6804 2 2 64 7 8 98 2 2 2 8 4 2 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 8

fc io tnt ni ne gc st i n g l i n k s www.apexhandtools.com/campbell 7-S, 7-G Pear Shaped Connecting Links Standard Material: Forged carbon and alloy steel - Heat Treated Standard Finish: Self-colored or galvanized Design Factor: 4 to For effective closure, peen to fill mating half as much as possible Carbon Steel, Heat Treated Galvanized Working Dimensions Weight/ Cat. UPC Load Limit B C D E 00 in. mm 02048 lb kg in. mm in. mm in. mm in. mm lb kg 8 0 2064 07492 80 89 2 6 7 6 2 2 9 6 4 2 2 2084 07496 00 497 8 92 2 2 2 64 6 7 4 20 8 6 2060 07490 000 2268 4 4 08 8 29 2 4 70 6 2 9 4 4 9 2062 074974 700 22 4 7 8 24 4 2 8 79 2 0 9 7 8 22 2064 074998 9600 4 6 44 2 8 /6 94 4 2 220 00 Fittings Alloy Steel, Heat Treated Galvanized Working Dimensions Weight/ Cat. UPC Load Limit B C D E 00 in. mm 02048 lb kg in. mm in. mm in. mm in. mm lb kg 8 0 206 074899 000 6 2 6 7 6 2 2 9 6 4 2 2 208 79822 000 2268 8 92 2 2 2 64 6 7 4 20 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 9

f i th to i on kg s Grab/Slip Hooks 477-A Eye Grab; 47-A Clevis Grab; 474-A Eye Slip; 476-A Clevis Slip READ AND UNDERSTAND THESE S AND INSTRUCTIONS BEFORE USING GRAB AND SLIP HOOKS. Campbell grab and slip hooks are all drop-forged and heat treated. The alloy eye grab hooks meet the design requirements of Federal Specification RR-C-27. IMPORTANT: Instructions For Use. These hooks are designed to engage chain and are sized by the material diameter of the chain that they engage. Make sure hook size and chain diameter are compatible before lifting load. 2. Grab hooks are designed to grab a chain link and hold it in place.. Slip hooks are designed to allow chain to slip through the hook. 4. Only use genuine Campbell parts when replacing clevis pins and cotter keys.. Do not exceed working load limit (WLL). See table below. Fittings Failure to follow the Instructions For Use below and these warnings may cause death or serious injury. Use these hooks only as indicated. Never point load a hook. Do not use hooks for lifting personnel. Hooks must always be inspected for wear, distortion and damage before use. If worn, distorted or damaged, discard and replace. Always stand clear of loads being lifted. Working Load Limits (lb and kg) Hooks System 4 Heat Treated Alloy Eye & Clevis Grab, Clevis Slip Eye & Clevis Grab Clevis Slip WLL WLL WLL in. mm lb kg lb kg lb kg 4 6 2600 80 400 86 400 86 6 8 900 77 00 2 00 2 8 0 400 242 700 22 700 4 7 6 7200 269 0000 440 0000 440 2 9200 477 2000 448 000 902 8 6 00 22 800 827 2000 926 4 9 6200 7 2800 2848 - - Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 20

fh io tot ki ns g s www.apexhandtools.com/campbell Eye Grab Hooks, Grade 4, (Import) Forged steel Grade 4 Zinc plated UPC tagged Case Weight Working Load Limit Hook Cat. UPC Shelf Case in mm Description Finish Style 02048 Pack Pack lb kg lb kg 4 6 Eye Grab Hook, Grade 4 Zinc Plated Eye T900424 2229 0 00 40 8 2,600,79 6 8 Eye Grab Hook, Grade 4 Zinc Plated Eye T90024 22246 0 0 0,900,769 8 0 Eye Grab Hook, Grade 4 Zinc Plated Eye T900624 222 0 0 4 20,400 2,449 2 Eye Grab Hook, Grade 4 Zinc Plated Eye T900824 22222 20 6 6 9,200 4,7 Drop-forged alloy steel Standard Finish: Alloy hooks are heat treated, and self-colored Alloy hooks meet the design requirements of Federal Specification RR-C-27 Order unit is Each 477-A Eye Grab Hooks Fittings 477-A, Alloy Steel - Heat Treated Alloy, Self-colored (Bulk) Working Dimensions Weight Chain Cat. UPC Load Limit B E R Each in mm 02048 lb kg in mm in mm in mm lb kg 4 6 404 077 400 860 7 2 2 9 7 8 48.27.2 6 8 40 0782 00 22 9 2 7 6 2 6 6.47.2 8 0 406 0799 700 22 4 9 /2 2 2 6.7.2 2 408 0722 2000 44 8 29 2 2 7 8 86.7.79 Forged steel Grade 4 Zinc plated UPC tagged Eye Slip Hooks, Grade 4, (Import) Case Weight Working Load Limit Hook Cat. UPC Shelf Case in mm Description Finish Style 02048 Pack Pack lb kg lb kg 4 6 Eye Slip Hook, Grade 4 Zinc Plated Eye T90424 22277 0 00 40 8 2,600,79 6 8 Eye Slip Hook, Grade 4 Zinc Plated Eye T9024 22284 0 0 0,900,769 8 0 Eye Slip Hook, Grade 4 Zinc Plated Eye T90624 2229 0 0 0 22,400 2,449 2 Eye Slip Hook, Grade 4 Zinc Plated Eye T90824 22260 20 2 2 9,200 4,7 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 2

f i th to i on kg s Clevis Grab Hooks 47, 47-A 47, System & 4 Standard Material: Drop-forged carbon steel steel (system & 4) or alloy steel Standard Finish: System & 4 hooks available with blu-krome or self-colored finish. Alloy hooks are heat treated, and painted orange and stamped Alloy S/C finish hooks are bulk packed, blu-krome hooks are available packed 0 per box Order unit is Each Self-colored (Bulk) Blu-Krome (0/Box) Working Dimensions Weight Chain Cat. UPC Cat. UPC Load Limit B E P R Each in mm 02048 02048 lb kg in mm in mm in mm lb kg 4 6 40040 0788 400424 07892 2600 79 8 0 2 9 6 8 2 2 44 0.2 0. 6 8 4000 07922 40024 0799 900 769 2 2 7 6 8 0 2 0 0.9 0.27 8 0 40060 07960 400624 07977 400 2449 7 2 2 7 6 2 4 7 0.92 0.42 2 40080 074042 -- -- 9200 47 2 2 7 2 2 7 9 6 64 77 2.00 0.9 8 6 4000 07407 -- -- 00 26 6 2 2 2 20 4 9 2 2 96.90.77 Fittings 47-A, Alloy Steel - Heat Treated Alloy, Orange (Bulk) Working Dimensions Weight Chain Cat. UPC Load Limit B E P R Each in mm 02048 lb kg in mm in mm in mm lb kg * 4 6 40 0740 400 860 8 0 2 9 6 8 2 2 44 0.2 0. * 6 8 404 0740 00 2 2 2 7 6 8 0 2 0 0.9 0.27 * 8 0 40 07427 700 22 7 2 2 7 6 2 4 7 0.92.0.42 7 6 406 0744 0000 46 9 2 9 2 2 2 8 67.2 0.60 2 407 0744 2000 44 2 2 7 2 2 7 9 6 64 77 2.00 0.9 8 6 408 0748 800 820 6 2 2 2 20 4 9 2 2 96.90.77 4 9 409 0746 2800 287 6 24 6 24 6 2 4 2 2 2 6.2 2.78 *Supplied individually bagged and unassembled. Clevis Grab Hooks, Grade 4, (Import) Forged steel Grade 4 Zinc plated UPC tagged Case Weight Working Load Limit Hook Cat. UPC Shelf Case in mm Description Finish Style 02048 Pack Pack lb kg lb kg 4 6 Clevis Grab Hook, Grade 4 Zinc Plated Clevis T90424 92678 0 00 4 9 2,600,79 6 8 Clevis Grab Hook, Grade 4 Zinc Plated Clevis T9024 9268 0 0 6 6,900,769 8 0 Clevis Grab Hook, Grade 4 Zinc Plated Clevis T90624 92692 0 0 6 2,400 2,449 2 Clevis Grab Hook, Grade 4 Zinc Plated Clevis T90824 22066 20 7 7 9,200 4,7 Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 22

fh io tot ki ns g s www.apexhandtools.com/campbell Clevis Slip Hooks, Grade 4, (Import) Forged steel Grade 4 Zinc plated UPC tagged Clevis Slip Hook with Latch Clevis Slip Hook Hook Style Cat. UPC Shelf Case Case Weight Working Load Limit in mm Description Finish 02048 Pack Pack lb kg lb kg 4 6 Clevis Slip Hook, Grade 4 Zinc Plated 6 8 Clevis Slip Hook, Grade 4 Zinc Plated 8 0 Clevis Slip Hook, Grade 4 Zinc Plated 2 Clevis Slip Hook, Grade 4 Zinc Plated Clevis T940424 92647 00 8 26 Clevis w/latch T9700424 9208 0 Clevis T94024 9264 0 9 8 Clevis w/latch T970024 92098 0 47 2 Clevis T940624 9266 0 72 Clevis w/latch T9700624 9204 0 42 9 Clevis T940824 22064 4 20 Clevis w/latch T9700824 220647 4 20 2,600,79,900,769,400 2,449 9,200 4,7 Fittings Clevis Slip Hooks 476-A Standard Material: Drop-forged alloy steel Standard Finish: Alloy hooks are heat treated, and painted orange and stamped AH Order unit is Each Design Factor: Alloy steel hooks is -/2 to 476-A, Alloy Steel - Heat Treated Alloy, Orange (Bulk) Working Dimensions Weight Chain Cat. UPC Load Limit B E P R Each in mm 02048 lb kg in mm in mm in mm lb kg * 4 6 440 0786 400 860 8 0 6 24 6 8 2 2 44 0.7 0.4 * 6 8 4404 0782 00 2 7 6 6 27 8 0 76.00 0.4 * 8 0 440 0780 700 22 2 4 2 7 6 2 87.40 0.64 7 6 4406 07847 0000 46 9 6 2 8 2 8 92 2.00 0.9 2 4407 0784 000 897 8 6 4 44 9 6 4 2 04.0.4 8 6 4408 0786 2000 9208 4 9 2 4 9 4 6 22.20 2.6 *Hooks have drilled hole for latch kit. See page 98 for latch kits. Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 2

f i t t i n g s s e c t i of n i tit ni dn eg xs Cat. Page Cat. Page Cat. Page Cat. Page Fittings 62... 06 9249... 96 62... 06 92... 96 622... 06 922... 96 622... 06 924... 96 62... 06 94020... 9 62... 06 94040... 9 624... 06 9400... 9 624... 06 94070... 9 62... 06 94090... 9 62... 06 940... 9 626... 06 9420... 9 626... 06 94220... 94 626... 07 9422... 94 6262... 07 9420... 94 626... 07 942... 94 6264... 07 94240... 94 604... 00 9424... 94 60... 00 9420... 94 606... 00 942... 94 608... 00 94270... 94 60... 00 9427... 94 62... 00 94290... 94 64... 00 9429... 94 66... 00 9420... 94 620... 00 902... 9 6404... 0 904... 9 640... 0 90... 9 6406... 0 907... 9 6408... 0 9... 9 640... 0 92... 9 642... 0 922... 94 644... 0 92... 94 646... 0 924... 94 6420... 0 92... 94 6400... 0 927... 94 640... 0 9... 94 6402... 0 92... 94 89900... 97 9900... 98 8990... 97 99020... 98 9290... 9 9900... 98 90... 9 99040... 98 920... 9 9900... 98 9420... 96 99060... 98 942... 96 99070... 98 940... 96 99080... 98 94... 96 99090... 98 9440... 96 9900... 98 944... 96 990... 98 940... 96 9940... 98 94... 96 99402... 98 9460... 96 9940... 98 946... 96 99404... 98 9470... 96 9940... 98 947... 96 99406... 98 9480... 96 99407... 98 9490... 96 99408... 98 90... 96 99409... 98 920... 96 404... 2 9227... 9 40... 2 9229... 9 406... 2 92... 9 408... 2 922... 9 440... 2 924... 9 4404... 2 9242... 96 440... 2 924... Para prevenir la posibilidad 96de lesiones 4406... graves: 2 9244... NO EXCEDA el límite de 96 carga de 4407... trabajo (WLL). 2 924... NO LA UTILICE choque 96 o golpee 4408... la carga. 2 9247... NO USE el accesorio si 96 se ve deformado 40040... o desgastado. 22 400424... 22 4080... 88 4000... 22 408... 89 40024... 22 4089... 89 40060... 22 400... 88 400624... 22 40... 89 40080... 22 420... 88 4000... 22 42... 89 40... 22 429... 89 404... 22 440... 88 40... 22 44... 89 406... 22 460... 88 407... 22 46... 89 408... 22 469... 89 409... 22 480... 88 4074... 97 48... 89 407... 97 4200... 88 409... 97 420... 89 200404... 8 4209... 89 20044... 8 4220... 88 20004... 8 422... 89 2004... 8 4240... 88 200604... 8 424... 89 20064... 8 4280... 88 200804... 8 428... 89 20084... 8 420... 88 20004... 8 42... 89 2004... 8 4400... 88 2024... 8 440... 89 206... 9 4200... 9 208... 9 42060... 9 2064... 9 42070... 9 2084... 9 42080... 9 2060... 9 404... 9 2062... 9 40... 9 2064... 9 406... 9 20860... 8 408... 9 20880... 8 40... 9 20900... 8 6200... 20920... 8 62002... 904... 86 6200... 906... 86 6200... 908... 86 62006... 9089... 86 62007... 90... 86 620... 92... 86 62002... 929... 86 6200... 94... 86 6200... 96... 86 62006... 969... 86 62007... 98... 86 62009... 920... 86 6200... 9209... 86 620... 922... 86 620... 924... 86 6204... 9249... 86 620... 928... 86 6206... 92... 86 62024... 940... 86 62028... 40... 89 62040... 6 4040... 88 620402... 6 404... 89 62040... 6 400... 88 62040... 6 40... 89 620406... 6 4060... 88 620407... 6 406... To prevent the possibility of 89serious 620409... bodily injury: 6 4069... DO NOT EXCEED the working 89 load 6204... limit. 6 4070... DO NOT shock or impact 88load. 620422... 6 407... DO NOT USE if the fitting 89is visibly 620427... distorted or worn. 6 24

f i t t i n g s s e c t i o n i n d e x fittings index www.apexhandtools.com/campbell Cat. Page Cat. Page Cat. Page Cat. Page 6200... 4, 640706... 62002... 4, 640707... 6200... 4, 640702... 0 6200... 4, 64070... 0 62006... 4, 640704... 0 62007... 4, 64070... 0 6200... 4, 640706... 0 620... 4, 640708... 0 620... 4, 6407604... 04 6204... 4, 640760... 04 620... 4, 6407606... 04 6206... 4, 6407608... 04 6209... 4, 640760... 04 62020... 4, 640762... 04 6202... 4, 699024... 8 62022... 4, 69904... 8 6202... 4, 699044... 8 62024... 4, 69904... 8 62027... 4, 699064... 8 62028... 4, 699074... 8 62029... 4, 699084... 8 620... 4, 699094... 8 6204... 4, 69904... 8 626020... 04 69924... 8 6260202... 04 69944... 8 626020... 04 69964... 8 6260204... 04 69984... 8 626020... 04 699204... 8 6260206... 04 699244... 8 6260207... 04 69928... 8 6260208... 04 6992... 8 6260209... 04 70002... 626020... 04 7000... 62602... 04 70004... 62600... 0 7000... 626002... 0 70006... 62600... 0 70007... 626004... 0 70008... 62600... 0 70009... 626402... 0 700... 62640... 0 7002... 626404... 0 700... 09 64020... 6 7002... 09 640204... 6 700... 09 64020... 6 7004... 09 640204... 90 7006... 09 64020... 90 7007... 09 640206... 90 7008... 09 640207... 90 7009... 09 640208... 90 70... 09 64020... 90 702... 09 64022... 90 704... 09 64024... 90 70... 09 640240... 87 706... 09 6402406... 87 707... 09 6402407... 87 709... 09 6402408... 87 7020... 09 640240... 87 702... 09 640242... 87 7022... 09 640244... 87 702... 09 640246... 87 B9604... 89 640002... 84 B960... 89 64000... 84 B9606... 89 640004... 84 T7670409... 8 640006... Para prevenir la posibilidad 84de lesiones T767049... graves: 8 640008... NO EXCEDA el límite de 84 carga de T7670429... trabajo (WLL). 8 640704... NO LA UTILICE choque o golpee T767049... la carga. 8 64070... NO USE el accesorio si se ve deformado T7670449... o desgastado. 8 T767049... 8 T7670479... 8 T7670489... 8 T7670499... 8 T900424... 2 T90024... 2 T900624... 2 T900824... 2 T90424... 2 T9024... 2 T90624... 2 T90824... 2 T940424... 2 T94024... 2 T940624... 2 T940824... 2 T90424... 22 T9024... 22 T90624... 22 T90824... 22 T960... 00 T9604... 00 T960... 00 T9606... 00 T9608... 00 T9640... 90 T96404... 90 T9640... 90 T96406... 90 T96408... 90 T9640... 90 T9642... 90 T9644... 90 T9646... 90 T9700424... 2 T970024... 2 T9700624... 2 T9700824... 2 TF8992... 97 DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. Fittings 2

f i t t i n g s Fittings Para prevenir la posibilidad de lesiones graves: NO EXCEDA el límite de carga de trabajo (WLL). NO LA UTILICE choque o golpee la carga. NO USE el accesorio si se ve deformado o desgastado. DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. 26

Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads.

b l o c k s Campbell Blocks Table of Contents Begun as a forging company in 84, Campbell/ Brewer-Titchener first manufactured horse harnesses, then carriage hardware, then horseless carriage hardware. From hardware for power lines in the 90 s, to forgings for the war effort in the 40 s. Campbell/ Brewer-Titchener began making high quality, wire rope and chain fittings in the 0 s. Today the line includes well over 000 different types and sizes of drop-forged eyebolts, wire rope clips, shackles, swivels, hooks, turnbuckles and more. Since 97, when Campbell/Brewer-Titchener acquired the Boston & Lockport Corporation, the brand has also been a leading name in high quality tackle blocks. This line includes blocks with wood, metal and nylon shells for fiber, manila or wire rope. Many options are offered: a wide selection of drop forged hooks, eyes and shackles; various bushing types; and models with one to four sheaves. Replacement sheaves, bushings and pins are also available. The Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 900. Blocks Contents (by Figure ) Page 00-00 6-7 0-02 7 04-042 8 06 9 07, 07 40 072, 074 4 0-0 42 07 4 409 4 4099 4 402 44 42, 42 46-47 02 48 022 47 60T 48 CHB00 47 Contents (by Product) Page Bight Angle Factor 4 Blocks, Lineman s 47 Blocks, Locking 4 Blocks, Manila Rope 6-4 Blocks, Lubrication 2 Blocks, Selection of Blocks, Wire Rope 4-4 Definitions 29 Hooks 48 Important Information - Inspection of Blocks 2 Load on Blocks - 4 Maintenance of Blocks 2 Marine Hardware 48 Public Utility Hardware 47 Reeving of Blocks Sheaves, Manila Rope 46 Sheaves, Wire Rope 46-47 Warning Statement 0 Campbell Blocks Numerical Index 49 Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 28

b l o c k s www.apexhandtools.com/campbell Definitions: Important Block Terms Bight: Fairleading: Line Pull: Mechanical Advantage: Parts of Line: The area formed by the angle of the incoming and outgoing line (see figure #2, page ). To change the direction of pull on a lead rope. The line pull is the amount of force transmitted to the rope by the winch, or other forms of power. All Working Load Limits are based on resultant loads. The amount by which a block system multiplies the force (or load) applied to it. The number of lines needed for a given load. Loads Ton: Proof Test: Ton is equal to 2240 LB unless otherwise noted. Campbell has the ability to proof test all blocks and fittings. The usual proof test is twice the Working Load Limit. Proof testing and certifying will be done at customer s request, at extra cost. Side Load: Shock Load: The result of a load which is applied off-center. The result of the rapid application of force (such as impacting and /or jerking), or the rapid movement of a static load. Blocks Ultimate Load: Working Load Limit: The average load at which a product fails, or no longer supports the load. The Working Load Limit (WLL) is the maximum resultant load which should ever be applied to the product in service, even when new, and when the load is uniformly applied in direct tension. Caution should be used when determining the resultant load, as the manner in which the product is used can increase the load. (Refer to Figure, page ) Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 29

b l o c k s Warning Statement - Blocks BLOCK USE AND MAINTENANCE INFORMATION: Read, understand and follow these warnings and instructions prior to selection, maintenance and use of tackle block sytems. Falling load may cause death or serious injury Do Not exceed Working Load Limit Do Not stand under load or in bight Do Not side load or shock load Do Not use worn or damaged block or rope IMPORTANT: Read and understand the instructions and warnings before using this block. It is the responsibility of the employer to place this information into the hands of the operator. INSTRUCTIONS FOR USE Blocks Do Not exceed the Working Load Limit of the block(s) being used. Check the label on the block or refer to the Apex Tool Group catalog Do Not exceed the Working Load Limit or operating limitations of the rope being used. If uncertain, consult the rope manufacturer Use the recommended rope diameter. See the label or Apex Tool Group catalog Know the weight of the load to be lifted and the conditions of the lift. For example, a flat load embedded in mud will require extra pulling power to break the vacuum and may create a shock load Be sure there are no impediments in the way of the lift that could snag the load and increase the load on the block(s) Blocks used above or aloft should be attached with shackles Do Not side load or shock load blocks. When using snatch blocks, be sure that the block is closed properly before the load is applied Snatch blocks should not be used for hoisting: they should be used for fairleading only Do Not stand under the load or in the bight area. Do Not stand in the direct line of pull of any load Be sure the structural member to which the block is being attached is strong enough to support the load Assure proper lubrication of the block. Improper lubrication can lead to block failure. Read and follow lubrication schedules. Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 0

b l o c k s www.apexhandtools.com/campbell Important Information Block systems must be properly designed, used and maintained. A continual inspection program should be undertaken to discover gouges, distortion, cracks, elongation (or stretching), spread in the throat openings of hooks, severe wear or other damage. Any abuse, misuse or alteration may lessen the load a block system will sustain. Some examples of changes are as follows: Twisting or side loading Disfigurement Corrosion Shock loading Use for a purpose other than that for which a particular block was intended Use to carry a load in excess of the Working Load Limit Blocks consist of one or more sheaves fitted in a wood or metal shell. Blocks are supported by a fitting attached to the strap of the block. These blocks are intended to be used in conjunction with other components in a load-sustaining system to gain mechanical advantage. Care should be taken to select components of compatible type, size and Working Load Limit. Work Load Limits shown in Apex Tool Group literature are applicable to new blocks, or blocks in as new condition. Selection of Blocks To select a block to fit your requirements, the following must be considered:. Are there regulations that could affect the choice of blocks, such as federal, OSHA, state, maritime, etc. 2. What loads (weight) will be lifted? This must be known to select a block with an appropriate work load limit.. How many parts of line are required? (See Method of Figuring, page.) 4. What is the size, type and working load limit of rope to be used? Consult a rope catalog to determine working load, rope strength and fatigue factors.. What is the speed of the line? This will help determine what type of bearing should be used. 6. Insure that the proper type of fitting is utilized. A block used above or aloft should be attached with shackles. 7. How will the block be reeved, and does it require a dead end becket? (See Method of Reeving Manila and Wire Rope Blocks, page.) 8. What is the fleet angle of the wire line? Line entrance and exit angles should be no more than 90. Use the bight angle factor (See page 4) to determine resultant load to properly determine Working Load Limit of your block. Blocks Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads.

b l o c k s Block Inspection and Maintenance Carefully examine the block(s) and rope(s) for wear and damage before each use Do not use a block if the sheaves do not turn freely. Sheaves must turn freely. Tight sheaves could indicate worn bushings or bearings Do not use a block with excessive play in the sheave. Check for excessive play in the sheave. Excessive play could indicate worn bushings or bearings Do not use a block with a loose becket bolt or rope splice. Check the becket bolt holding the dead end of the rope; the becket bolt should be tight. The rope splice on the becket should also be tight Do not use a block with worn or frayed rope. Check the condition of the rope for fraying Do not use a block with a damaged hook latch. Hooks on blocks should have a latch in proper operating condition. If the latch does not engage the tip of the hook, the hook could be sprung or opened due to an overload on a previous lift Lubrication The following represents the minimum recommended schedule for lubrication using medium viscosity lithium-based grease. Your own usage, including environmental factors and the frequency and type of use, may require lubrication that is more frequent. SHEAVE BEARINGS Blocks Tapered Rollers: Every 40 hours of continuous operation or every 0 days of intermittent operation. Roller Type: Every 24 hours hours of continuous operation or every 4 hours of intermittent operation. Bronze (Not self-lubricated): Every 8 hours of continuous operation or every 4 days of intermittent operation. HOOK BEARINGS Anti-Friction: Every 4 days for frequent swiveling or every 4 days for infrequent swiveling. Bronze Thrust/No Bearings: Every 6 hours for frequent swiveling or every 2 days for infrequent swiveling. Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 2

b l o c k s www.apexhandtools.com/campbell Load on Blocks The Working Load Limit (WLL) is the maximum resultant load which should ever be applied to a block and its fittings. Blocks used to fairlead (single sheave and snatch blocks) can be subjected to a load greater than the weight being lifted or pulled. Results of Applied Loads on Single Blocks Figure The total weight (load) on a single sheave block or snatch block varies with the bight angle between the incoming and outgoing line to the block (see Figure 2). Blocks Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads.

b l o c k s Load on Blocks (continued) To determine this load:. Determine the bight angle of the line. 2. Refer to Table for the corresponding angle factor.. Multiply the pull on the line or the weight of the load (line pull) by the angle factor to obtain the load on the block. Bight Angle Factor Angle Factor Angle Factor Blocks 0 2.00 00.29 0.99 0. 20.97 20.00 0.9 0 0.84 40.87 0.76 4.84 40 0.68 0.8 0 0.2 60.7 60 0. 70.64 70 0.7 80. 80 0.00 90.4 Table Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Figure Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 4

b l o c k s www.apexhandtools.com/campbell Method of Reeving Manila and Wire Rope Blocks The method of reeving tackle blocks will vary with the applications. With heavy lift cargo booms, cranes and so forth, where blocks with four sheaves or more are required, a number of lead blocks have to be considered. The Campbell engineering department will be happy to assist on such applications. The methods of reeving tackle blocks will vary with the applications. Method of Figuring Parts of Line L P = E L = Load lifted in pounds P = Line pull in pounds E = Efficiency factor For example: To figure Parts of Line required when load lifted L and line pull P are known. Parts of Line = 2 4 6 7 8 9 0 2 Bronze 0.96.8 2.8.6 4.4.2.9 6.6 7. 7.9 8. 9. Bushed E Factors Roller 0.98.9 2.9.8 4.7.6 6. 7. 8.2 9.0 9.8 0.6 Bearing 2,000 lb. (Load lifted L ) =. ( E ) 6,000 lb. (Line pull P ) You can see in the table at the right that an E factor of. requires 6 Parts of Line. Sheave, Bushing and Bearing Information Anti-friction Bearings (tapered, needle and ball bearings) are for faster line speeds and more frequent use at greater loads (minimum bearing friction). Iron Bushings (common bore) are very low speed lines and very infrequent use (high bearing friction). Bronze Bushings (self lubricating bronze, graphite bronze and pressure lubrication bronze) are for slow line speeds. Self-lubricating bronze and graphite bronze bushings are for infrequent use (moderate bearing friction). Pressure lubrication bronze bushings are for frequent use at greater loads (moderate bearing friction). The performance of bronze bushings is best determined by the PV Factor (maximum pressure velocity) at which the bearing is operating. This is the relationship between bearing pressure and bearing surface velocity. Brewer-Titchener bronze bushings have the following material properties: Maximum Bearing Pressure (BP): 4,00 pounds per square inch Maximum Bearing Velocity (BV):,200 feet per minute Maximum Pressure Velocity Factor (PV):,000 (Due to material property relations, the maximum BP times the maximum BV is not equal to the maximum To calculate Bearing Pressure (BP): Line Pull x Bight Angle Factor BP = Shaft Diameter x Hub Width To calculate Bearing Velocity (BV): PV BV = BP To calculate Line Speed: LINE SPEED = BV (Tread Diameter + Rope Diameter) Shaft Diameter These formulas can be used to determine the maximum allowable line speed for a given total sheave load. The maximum allowable line speed should be equal to or exceeding the required line speed. If the required line speed is greater than the calculated maximum allowable line speed, increase the shaft diameter and/or the hub width. For example: Using a 2 diameter sheave (tread diameter = 0.2 ; wire diameter = 0.7 ; shaft diameter =.0 ; hub width =.62 ), a,000 lb. line pull and a 90 bight angle determine the allowable line speed. BP = (,000 lb.) x (.4*) / (.0 x.62 ) = 2,90 psi (line pull) (bight angle factor)/(shaft dia.) (hub width) BV = (,000 psi.) / 2,90 = 9 FPM Allowable (PV factor) (BP) Line Speed = 9 x (0.2 + 0.7 ) /.0 = 9 FPM Allowable (BV) (tread dia. + rope dia.) (shaft dia.) Blocks Testing of Blocks and Fittings for Commercial Marine Cargo Vessels The Campbell plant has the facilities to proof test and certify blocks and 4. Multiple-sheave blocks with working load limits over 40 ton fittings to meet the safety standards established by most maritime nations. (6,288 Kgs.): proof tested to. times the working load limit. Following are the proof tests required for maritime certification.. Single blocks proof tested to 4 times the line pull.. Shackles, hooks, links and swivels; proof tested to twice the 6. Cargo hoisters (600 Series): proof tested to 4 times the line pull working load limit. shown in the catalog. All other single blocks proof tested to twice 2. Multiple-sheave blocks up to 20-ton (8, 44-Kgs.) working load the work load shown in the catalog, and marked with a working limit; proof tested to twice the working load limit. load one half that shown in the catalog.. Multiple-sheave blocks with working load limits of 20-40 ton All blocks and fittings certified to maritime standards will be indelibly (8,44-6,288 Kgs.): proof tested to 20 ton (8, 44 Kgs.) in marked with working load, proof test and identifying number. All tests will excess Antes de of usar the las working pastecas, load conozca limit. el limite de carga de trabajo de los be Know in long the ton Working equal to Load 2,240 Limit pounds of the (,06 block, Kgs.) or blocks, to be used. mismos. DO NOT EXCEED THE WORKING LOAD LIMIT. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. NOTICE: Las cargas The de product trabajo son specifications las fuerzas resultantes and dimensions de las cargas are de as trabajo. accurate as Working possible Loads at the are time Resultant of printing. Working However, Loads. because we are constantly improving the quality and design of our products, they can change without notice.

b l o c k s Regular Wood Shell Blocks for Manila Rope Single 00 AF Double 002 AF Triple 00 AF Screw Pin Anchor Shackle, Fitting K Flatted, Loose Swivel Hook with Latch, Fitting G Hard wood shells Drop forged fittings Available with bronze self-lubricating bushings Galvanized metal parts Blocks Specifications Block in. mm in. mm in. mm in. mm in. mm in. mm 76 4 02 27 6 2 8 20 0 24 Diameter Rope 8 0 2 8 6 4 9 2 8 29 Sheave O.D. 4 44 2 4 7 76 2 89 4 4 2 6 4 9 Rim Thickness 2 8 6 4 9 2 8 29 4 2 Center Pin Dia. 8 0 8 0 8 0 2 8 6 8 6 Weight lb kg lb kg lb kg lb kg lb kg lb kg Single.4 2 2 2 4 2 9 2 4 7 8 Double 2 4 2 6 2 6 2 Triple 2 4 2 2 2 9 4 7 8 2 Working Load Limit lb kg lb kg lb kg lb kg lb kg lb kg Single 00 227 000 44 200 44 800 86 2800 270 4000 84 Double 800 6 400 6 800 86 200 4 800 724 6000 2722 Triple 200 44 800 86 2400 089 200 42 4800 277 8000 629 Working Loads are Resultant Working Loads. Block Inch mm Inch mm Inch mm Inch mm Inch mm 76 4 02 27 6 2 8 20 Fittings Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Type Round Loose Hook AF Single 7206 6894 72046 6900 7206 697 72066 6924 - - Double 720686 6948 720696 69 720706 6962 72076 6979 - - Triple - - 72086 66006 720866 660 720876 66020 - - Loose, Swivel Hook with Latch G Single - - 72044 04282 - - - - - - Double - - 720694 020 - - - - - - Triple - - 72084 068 - - - - - - Screw Pin Anchor Shackle K Single - - 7204 04299 720 04442 7206 0496 7208 04794 Double - - 72069 0227 72070 07 7207 024 7207 0692 Triple - - - - - - 72087 06422 - - Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 6

b l o c k s www.apexhandtools.com/campbell Painter s Staging Blocks Wood blocks Roller bushed For /4 in. manila rope Galvanized metal parts 6 in. shell; sheave size -/2 OD x in. rim x /2 in. pin 00 J Fittings Single with Becket Double with Becket Cat. UPC 02048 Cat. UPC 02048 Long, Loose Hook J 720980 06767 72098 67898 Latched, Long, Loose Hook JS 720984 6999 - - Ideal Steel Blocks for Manila Rope Steel shells with drop forged flatted hooks Painted Available with bronze self-lubricating bushings or iron bushed Specifications Block in. mm in. mm 4 02 27 Diameter Rope 2 8 6 Sheave O.D. 2 4 7 76 Rim Thickness 8 6 4 9 Center Pin Dia. 8 0 8 0 Weight lb kg lb kg Single 2 2 2 Double 2 2 Triple 2 2 2 Working Load Limit lb kg lb kg Single 00 227 700 8 Double 600 272 900 408 Triple 900 408 00 680 Working Loads are Resultant Working Loads. Single 0 F Double 02 F Block Inch mm Inch mm 4 02 27 Fittings Cat. UPC Cat. UPC Type 02048 02048 Front Eye, Flatted, Loose Hook F Painted Bronze SL Single - - 72 2078 Bushed Double - - - - Iron Bushed Single - - - - Double 729 7026 - - Blocks Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 7

b l o c k s B & L Star Metal Blocks for Manila or Fiber Rope Steel shells Available with bronze self-lubricating bushings Galvanized finish Screw Pin Anchor Shackle, Fitting K Flatted, Loose Swivel Hook with Latch, Fitting G Single 04 AF Double 042 AF Blocks Specifications Block in. mm in. mm in. mm in. mm in. mm 76 4 02 27 6 2 8 20 Diameter Rope 8 0 2 8 6 4 9 2 Sheave O.D. 4 44 2 4 7 76 2 89 4 4 2 Rim Thickness 2 8 6 4 9 2 8 29 Center Pin Dia. 8 0 8 0 8 0 2 8 6 Weight lb kg lb kg lb kg lb kg lb kg Single 2 2 2 4 2 6 Double 2 2 2 6 9 2 4 6 2 7 Triple 2 2 4 2 2 8 4 2 2 0 Working Load Limit lb kg lb kg lb kg lb kg lb kg Single 700 8 00 499 00 90 2000 907 00 497 Double 000 44 600 726 2200 998 00 497 00 2 Triple 400 6 2200 998 200 42 4000 84 7000 7 Working Loads are Resultant Working Loads. Block Inch mm Inch mm Inch mm Inch mm 76 4 02 6 2 8 20 Fittings Cat. UPC Cat. UPC Cat. UPC Cat. UPC Type 02048 02048 02048 02048 Round LooseHook AF Bronze SL Single 724 774 7244 776 - - - - Bushed, Double - - 72469 790 7247 796 7247 7987 Galvanized Triple - - 7248 7204 - - - - Flatted, Loose, Swivel Hook with latch G Bronze SL Single 7244 0904 72444 0988 - - - - Bushed, Double - - - - - - - - Galvanized Triple - - - - - - - - Screw Pin Anchor Shackle K Bronze SL Single 7246 0904 - - - - - - Bushed, Double - - - - 72476 068 - - Galvanized Triple - - - - - - 724896 402 Note: These items are made to order Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 8

b l o c k s www.apexhandtools.com/campbell Gin or Roofer s Block for Manila Rope This block is furnished with a drop forged, flatted, swivel hook with latch Roller bushing; painted finish Specifications Block in. mm 2 0 Diameter Rope 2 Sheave O.D. 2 0 Rim Thickness 8 Center Pin Dia. 8 6 Weight lb kg 6 Working Load Limit* lb kg 000 44 Working Loads are Resultant Working Loads Cat. UPC. 02048 Block 726982 87 *Warning: Do not exceed Working Load Limit. Lift should not exceed 00 pounds. 06V Blocks Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 9

b l o c k s Drop Link, Manila Rope Snatch Blocks Shells from wood or steel Cross-bolted shell Fittings drop forged; metal parts galvanized Available with bronze self-lubricating bushing Drop link snatch blocks are primarily used as lead blocks; not recommended for hoisting Wood, 07 V Steel, 07 V Stiff Swivel Hook with Latch, Fitting V Blocks Specifications Block in. mm in. mm in. mm 4 02 6 2 8 20 Diameter Rope 4 9 7 8 22 2 Sheave O.D. 2 76 4 2 4 Rim Thickness 7 8 22 8 29 8 Bearing Diameter 8 6 4 9 7 8 22 Center Pin Dia. 8 0 2 8 6 Weight lb kg lb kg lb kg Wood, 07 2 9 4 2 2 6 Steel, 07 2 6 6 Working Load Limit lb kg lb kg lb kg 70 40 2400 089 4800 277 Working Loads are Resultant Working Loads. Block Inch mm Inch mm Inch mm 4 02 6 2 8 20 Fittings Cat. UPC Cat. UPC Cat. UPC Type 02048 02048 02048 Stiff Swivel Hook with Latch V Bronze Bushed, Galvanized Wood, 07 726486 288 726686 0 726886 420 Bronze Bushed, Galvanized Steel, 07 - - 726696 92 726896 482 Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 40

b l o c k s www.apexhandtools.com/campbell Wood or steel shells Bronze self-lubricated bushings Drop forged fittings Painted or galvanized fittings Safety Locking, Manila Rope Snatch Blocks Stiff Swivel Hook with Latch, Fitting V Wood, 072 V Steel, 074 V Specifications Block in. mm in. mm 6 2 8 20 Diameter Rope 7 8 22 2 Sheave O.D. 76 4 2 4 Rim Thickness 8 29 8 Bearing Diameter 4 9 7 8 22 Center Pin Dia. 2 8 6 Weight lb kg lb kg Wood, 072 9 4 2 2 6 Steel, 074 6 6 Working Load Limit lb kg lb kg 000 6 000 2268 Working Loads are Resultant Working Loads. Blocks Block Inch mm Inch mm 6 2 8 20 Fittings Cat. UPC Cat. UPC Type 02048 02048 Stiff Swivel Hook with Latch V Bronze Bushed, Galv. SL Wood, 072 726786 420 - - Bronze Bushed, Galv. SL Steel, 074 726796 4 726796 4472 SL stands for self-lubricating bushings Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 4

b l o c k s Nylon Blocks for Manila Rope Nylon shells and sheaves Fittings are drop forged Plated strap and connections Specifications Block in. mm 2 Diameter Rope 8-2 0 - Sheave O.D. 2 Single 0 F Double 02 F Triple 0 F Rim Thickness 8 29 Bearing Diameter 8 6 Center Pin Dia. 8 0 Weight lb kg Single 7 Double 2 Triple 6 7 Working Load Limit lb kg Single 00 227 Double 000 44 Triple 200 44 Blocks Working Loads are Resultant Working Loads. Fittings Cat. UPC Type 02048 Loose, Hook with Latch F Single - - Double 72222 0720 Triple 7222 077 Loose, Swivel Hook with Latch G Single 722024 07276 Double 722224 077 Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 42

b l o c k s www.apexhandtools.com/campbell Eastern, Manila Rope Snatch Blocks All fittings are drop forged Galvanized Specifications Block in. mm 6 2 Diameter Rope 7 8 22 Sheave O.D. 76 Rim Thickness 8 29 Bearing Diameter 4 9 Center Pin Dia. 2 Weight lb kg Steel, Galvanized, 07 9 4 Working Load Limit lb kg 000 6 Working Loads are Resultant Working Loads. Block Fittings Safety Locking 07 V in. mm 6 2 Cat. UPC 02048 Type Stiff Swivel Hook with Latch V Bronze Bushed, Galv. SL Safety, 07 7268796 004 Note: SL stands for self-lubricating bushings. Steel shells with steel sheaves Drop forged fittings Bronze, self-lubricating bushings Painted finish Team Snatch Blocks for Wire Rope Blocks Diameter Rope Specifications in. mm 8 6 Sheave O.D. 6 2 Rim Thickness 4 2 Bearing Diameter 4 2 Center Pin Dia. 2 Weight lb kg Steel, Galvanized, 07 4 Working Load Limit ton kg 7 60 Working Loads are Resultant Working Loads. Fittings Cat. 409V UPC 02048 72999 222 Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 4

b l o c k s Extra Heavy, Eastern Pattern Snatch Blocks Steel shells with steel sheaves Drop forged fittings Bronze self-lubricating bushings Features steel sleeve over sheave pin which increases strength and durability Combination score to handle variety of sizes of wire and manila rope Blocks Block Fittings 402V in. mm 6 2 Cat. UPC 02048 Type 402 with Galvanized Finish Fitting V 76624 2849 Specifications Block in. mm 6 2 Diameter Rope Manila 7 8 22 Wire 8 0 Sheave O.D. 76 Rim Thickness 8 29 Bearing Diameter 2 Center Pin Dia. 2 Weight lb kg 0 Working Load Limit* ton kg 2 84 * Warning: Do not exceed Working Load Limit Working Loads are Resultant Working Loads. Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 44

b l o c k s www.apexhandtools.com/campbell Drop Side Snatch Blocks Steel shells with steel sheaves Drop forged fittings Galvanized For wire or manila rope in. and 4 /2 in. blocks have bronze self-lubricating bushings; 6 in. and larger blocks have grooved bronze bushings with pressure greased lubrication Special feature: the bolt cannot be lost when the block is opened; connections are easily interchangeable 4099 H 4099 Q Specifications Block in. mm in. mm in. mm 76 4 2 4 6 2 Diameter Rope Manila - - 2 2 8 Wire 8 0 2 4 9 Sheave O.D. 76 4 2 4 6 2 Center Pin Dia. 4 9 2 2 8 Weight lb kg lb kg lb kg w/connection 2 2 26 2 w/o Connection 6 7 Working Load Limit ton kg ton kg ton kg 2 84 4 629 8 728 Working Loads are Resultant Working Loads. Blocks H V Q P NC Fittings Cat. UPC Cat. UPC Cat. UPC Cat. UPC Cat. UPC Type 02048 02048 02048 02048 02048 Self-lube Wire 7970 2476 7974 2474 7972 2470 7976 8977 797 2476 4 /2 Bronze Wire 79760 24778 79764 248 79762 24792 - - 7976 24822 6 Bronze PL Wire 79790 2492 79794 24990 79792 24976 - - - - Connection Types H - Hook, no latch P - Drilled swivel eye V - Hook, with latch NC - No connection Q - Screw pin anchor shackle Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 4

Iron Sheaves for Manila Rope 42 Cast iron sheaves Available with bronze self-lubricating bushings Galvanized Outside Diameter Rim Width Specifications Pin Diameter Maximum Fiber sbh le oa cv ke s Bronze Bushed Self-lube in. mm in. mm in. mm in. mm Cat. UPC 02048 4 44 2 8 0 8 0 74402 2647 2 4 7 8 6 8 0 2 7442 26482 76 4 9 8 0 8 6 74422 260 2 89 2 2 4 9 74442 266 4 4 2 8 29 8 6 2 74482 268 Extra Heavy, Iron Sheaves for Wire Rope Cast iron sheaves Available with iron bushing or bronze self-lubricating bushing Painted or galvanized finish 42 Blocks Specifications A B C D E F Bronze Bushed Self-lube Outside Diameter Rim Width Pin Diameter Hub Width Hub Diameter Maximum Wire Rope Iron Bushed Weight Cat. UPC Cat. UPC in. mm in. mm in. mm in. mm in. mm in. mm lb kg 02048 02048 76 2 8 0 9 6 4 8 29 4 6 8 0.28 - - 76022 27649 76 4 9 8 0 6 2 8 29 8 0 4 0.4 - - 760222 2766 4 02 4 9 2 6 2 2 8 8 0 2 0.68 - - 76022 27694 4 02 4 9 4 9 6 2 2 8 8 0 2 0.68 - - 7622 286 4 02 2 4 9 6 27 2 2 2 2. - - 76622 2870 27 2 4 9 6 27 2 8 4 2.6 70922 2692 760922 277 6 2 4 9 8 6 6 2 2 8 4 8 0.6 7022 2692 76022 27762 6 2 2 4 9 6 27 2 4 7 8 0 4 4 2. - - 7624 27809 6 2 2 2 6 27 2 4 7 8 0 4 4 2. - - 7642 2784 6 2 2 8 6 6 27 2 8 4 2 4 2 2.04 722 26949 - - 6 2 2 4 9 6 27 2 8 4 2 4 2 2.04 - - 76222 27786 6 2 2 4 9 6 27 2 8 4 2 4 2 2.04 - - 76224 2779 6 2 2 7 8 22 6 27 2 8 4 2 4 2 2.04 - - 7622 2780 6 2 2 2 6 27 2 8 4 2 4 2 2.04 - - 76422 27847 6 2 2 4 2 6 27 2 4 7 2 4 2 2.04 - - 7622 2786 Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 46

sb hl oe ac vk es s & b l o c k s www.apexhandtools.com/campbell Specifications A B C D E F Bronze Bushed Self-lube Outside Diameter Extra Heavy, Iron Sheaves for Wire Rope (cont.) Rim Width Pin Diameter Hub Width Hub Diameter Maximum Wire Rope Iron Bushed Weight Cat. UPC Cat. UPC in. mm in. mm in. mm in. mm in. mm in. mm lb kg 02048 02048 8 20 2 4 9 6 27 2 8 4 2 6 4 2.84 7722 2708 76722 2788 8 20 2 4 9 6 27 2 8 4 2 6 4 2.84 - - 767 27892 Lineman s Snatch Block, 022 For stringing light conductor cable Hook fits around insulator pin or in the insulator hole, which can be driven into a pole or cross arm Available with or without hook Available bronze, self-lubricating bushings or roller bushed bearings Bronze Bushed, SL Roller Bushed Cat. UPC Cat. UPC Weight Description 02048 02048 lb kg With Hook 780602 2984 78060 2984 2 2. Without Hook 78060 2988 - - 2 4.02 Hand Line Utility Block, CHB00 Blocks Side opening block with latched swivel hook, or swivel meat hook Block and sleeve constructed of rugged reinforced nylon fiberglass high di-electric material and feature reinforced swivel bearings sheaves - blocks can accommodate rope through /8 diameter Blocks rated at,000 lb. Working Load Limit and designed with a to safety factor 78000 78002 Cat. UPC Weight Description 02048 lb kg Swivel Hook with Latch 78000 22680.7 0.77 Swivel Meat Hook 78002 22697.6 0.7 Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 47

b l o c k s & bhl o oc k s Try Net, 60T Forged steel swivel eye Hardened steel sheave for wear resistance Bronze bushing with pressure greased lubrication Cat. UPC 02048 Working Load Limit Weight ton kg lb kg 79908 0472 2722 9 9 7998 0496 46 22 0 Come-Along Hook, 02 /2 forged steel Galvanized finish Swivel eye Cat. UPC 02048 Working Load Limit Weight ton kg Finish lb kg 7800 29742 Not Rated Galvanized 9 9 Blocks Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 48

bi nl do ec xk s www.apexhandtools.com/campbell Cat. Page Cat. Page Cat. Page Cat. Page 7206... 6 72044... 6 7204... 6 72046... 6 720... 6 7206... 6 7206... 6 72066... 6 7208... 6 720686... 6 720694... 6 72069... 6 720696... 6 72070... 6 720706... 6 7207... 6 72076... 6 7207... 6 72084... 6 72086... 6 720866... 6 72087... 6 720876... 6 720980... 7 720984... 7 72098... 7 722024... 42 72222... 42 722224... 42 7222... 42 72... 7 729... 7 7244... 8 724... 8 7246... 8 72444... 8 7244... 8 72469... 8 7247... 8 72476... 8 7247... 8 7248... 8 724896... 8 726486... 40 726686... 40 726696... 40 726886... 40 726896... 40 726786... 4 726796... 4 726796... 4 7268796... 4 726982... 9 72999... 4 7224... 44 7970... 4 7972... 4 7974... 4 797... 4 7976... 4 79760... 4 79762... 4 79764... 4 7976... 4 79790... 4 79792... 4 79794... 4 74402... 46 7442... 46 74422... 46 74442... 46 74482... 46 70922... 46 7022... 46 722... 46 7722... 47 76022... 46 760222... 46 76022... 46 760922... 46 76022... 46 76222... 46 76224... 46 7624... 46 7622... 46 76422... 46 7642... 46 7622... 46 76722... 47 767... 47 7622... 46 76622... 46 7800... 48 78000... 47 78002... 47 78060... 47 780602... 47 78060... 47 79908... 48 7998... 48 Blocks Antes de usar las pastecas, conozca el limite de carga de trabajo de los mismos. NO EXCEEDA EL LIMITE DE CARGA DE TRABAJO. Las cargas de trabajo son las fuerzas resultantes de las cargas de trabajo. Know the Working Load Limit of the block, or blocks, to be used. DO NOT EXCEED THE WORKING LOAD LIMIT. Working Loads are Resultant Working Loads. 49

Blocks 0

Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn.

Campbell Chain Slings Table of Contents c h a i n s l i n g p r o d u c t s Founded in 99, Campbell is the largest manufacturer of welded and weldless chain in the United States. Users of Campbell chain can select from a wide range of working load capacities including proof coil, high test, transport and alloy; finishes including self-colored, Blu-Krome, galvanized and bright color polycoated; links that are short, long, twisted, locked, looped, even stamped from flat stock. Several chain types are even available in solid brass and bronze. Campbell chains and assemblies, including slings for overhead lifting, tie-downs and binder chains, have earned for the manufacturer an outstanding reputation for quality. The Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 900. Slings Contents Page Chain Shortener 68 Chain Sling Program, Surveys, Seminars, Schools Chain Sling Literature Supplements Chain Sling Lifting Angles 9 Chain Sling Rated Loads 4 - Chain Service Centers 6 Chain Specifications 9 Chain Terms, Certificate of Test 7 Chains, Magnet 8 Field I.D. Tags 8 Hooks, Foundry 72 Hooks, Grab 7, 82 Hooks, J 84 Hooks, S 84 Hooks, Self-locking 74-7, 8 Hooks, Sling 70-7, 8 How to Assemble Coupling Links 78 How to Order Chain Slings 7 Identification Tags 7 Contents Page Latches 7, 82 Links, Coupling 80 Links, Oblong 76 Off-Center Working Load Limits Chart 70 Sling Assembly Tables 79 Sling Design 78 Sling Inspection, Care and Use 8 Slings, Adjustable 64-6 Slings, Adjustable Loop 64-6 Slings, Basket 66-67 Slings, Double 6 Slings, Double with Links 68 Slings, One-End-Only, Chain Fitting 69 Slings, Quadruple 6 Slings, Single 60 Slings, Triple 62 Sub-Assembly, Oblong Master Links 77 Campbell Slings Numerical Index 86 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. DO NOT EXCEED the working load limits for chain or components. NOTICE: LA UTILICE The product si la cadena specifications o los componentes and están dimensions visualmente are as accurate DO NOT as USE possible if the chain at the or components time of printing. are visibly However, distorted or worn. because distorsionados we are o gastados. constantly improving the quality and design of our product, they can change without notice. 2

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Campbell s Chain Sling Program Surveys, Seminars and Schools Users of Campbell Chain Slings may receive annual surveys to assure compliance with OSHA standards. These thorough in-plant inspections by qualified Apex Tool Group/Campbell person nel can point out potential problems, encourage proper handling and storage, show how to reduce inventory and increase productivity. Upon completion of the survey, Campbell will provide a complete report on the status of every Campbell chain sling and clamp for your OSHA compliance files. To instruct customers in the proper use of slings as well as in maintenance and safety procedures, Campbell will conduct seminars in your plant or at its local sling repair center. Further, if interested, we ll train your plant personnel to conduct their own sling survey in a one and a half day school held at our York, Pennsylvania plant. Upon completion of this school, your personnel will be fully qualified to perform OSHA compliance inspections. Campbell s sling repair centers across the U.S. help make the most of your company s chain sling investment. Wherever economical reconditioning is possible, Campbell will advise Repairs you on estimated cost. A nearby center will then repair, prooftest and issue new certificates of test to put your slings back to work quickly. To Supplement Your Sling Chain Program Number 020 Number 94 Slings Para prevenir la posibilidad Number de 70 una lesión personal sería: Number 068 NO EXCEDA los límites de carga de las cadenas o componentes. DO NOT EXCEED the working load limits for chain or components. NO LA UTILICE si la cadena o los componentes están visualmente English Number 0408 DO NOT USE if the chain or components are visibly distorted or worn. distorsionados o gastados. French / Spanish Number 0

c h a i n s l i n g p r o d u c t s Rated Loads For Grade 80 (System 8) Alloy Steel Chain Slings Rated Load for Grade 80 Alloy Steel Chain Slings Chain Nominal Single Leg Sling - 90 - Horizontal Loading Rated load Double Leg Sling and Single Basket at Horizontal Angle Triple and Quadruple Leg Sling and Double Basket at Horizontal Angle 60 4 0 60 4 0 Double at 60 Double at 4 Double at 0 Quad at 60 Quad at 4 Quad at 0 in. mm lb kg lb kg lb kg lb kg lb kg lb kg lb kg 7 2. 2,00 90,600,60,000,0 2,00 90,00 2,40 4,400 2,000,200,40 9 2 7,00,600 6,00 2,70 4,900 2,20,00,600 9,00 4,0 7,400,400,200 2,400 8 0 7,00,200 2,00,0 0,000 4,00 7,00,200 8,400 8,00,00 6,800 0,600 4,800 2 2,000,400 20,800 9,40 7,000 7,700 2,000,400,200 4,0 2,00,0 8,000 8,200 8 6 8,00 8,200,00 4,200 2,600,600 8,00 8,200 47,000 2,00 8,400 7,400 27,00 2,00 4 20 28,00 2,800 49,000 22,20 40,000 8,0 28,00 2,800 7,00,400 60,000 27,20 42,400 9,00 7 8 22 4,200,00 9,200 26,80 48,400 2,900 4,200,00 88,900 40,20 72,00 2,900,00 2,20 26 47,700 2,600 82,600 7,00 67,400 0,600 47,700 2,600 2,900 6,20 0,200 4,90 7,00 2,00 4 2 72,00 2,800 2,200 6,800 02,200 46,400 72,00 2,800 87,800 8,200,400 69,600 08,400 49,200 Rated Loads for Grade 80 Alloy Steel Chain Slings - Choker Hitches Chain Single Leg Double Leg and Single Baskets Triple and Quadruple Leg; Double Baskets Nominal 90 60 4 0 60 4 0 in. mm lb kg lb kg lb kg lb kg lb kg lb kg lb kg 7 2.,700 70 2,900,00 2,400,00,700 70 4,400,90,00,600 2,0,0 9 2 7 2,800,00,000 2,200,900,800 2,800,00 7,00,00,900 2,700 4,0,900 8 0,700 2,0 9,800 4,40 8,000,60,700 2,0 4,700 6,60 2,00,40 8,00,80 2 9,600 4,00 6,600 7,0,600 6,0 9,600 4,00 2,000,00 20,400 9,20 4,400 6,0 8 6 4,00 6,0 2,000,0 20,00 9,00 4,00 6,0 7,600 7,00 0,700,900 2,700 9,80 Slings 4 20 22,600 0,20 9,200 7,800 2,000 4,00 22,600 0,20 8,800 26,700 48,000 2,800,900,40 7 8 22 27,400 2,400 47,400 2,00 8,700 7,00 27,400 2,400 7,00 2,200 8,000 26,00 4,000 8,600 26 8,200 7,00 66,00 0,000,900 24,00 8,200 7,00 99,00 4,000 8,000 6,70 7,200 26,000-4 2 7,800 26,20 00,200 4,40 8,800 7,00 7,800 26,20 0,200 68,0 22,700,700 86,700 9,0 Note: Angle of choke should be greater than 20 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 4

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Rated Loads For Grade 00 (System 0) Alloy Steel Chain Slings Rated Load for Grade 00 Alloy Steel Chain Slings Chain Nominal Single Leg Sling - 90 - Horizontal Loading Rated load Double Leg Sling and Single Basket at Horizontal Angle Triple and Quadruple Leg Sling and Double Basket at Horizontal Angle 60 4 0 60 4 0 Double at 60 Double at 4 Double at 0 Quad at 60 Quad at 4 Quad at 0 in. mm lb kg lb kg lb kg lb kg lb kg lb kg lb kg 9 2 7 4,00,90 7,400,400 6,00 2,70 4,00,90,200,00 9,00 4,0 6,400 2,90 8 0 8,800 4,000,200 6,90 2,400,60 8,800 4,000 22,900 0,400 8,700 8,00,200 6,000 2,000 6,800 26,000,800 2,200 9,600,000 6,800 9,000 7,60,800 4,40 22,00 0,200 8 6 22,600 0,00 9,00 7,70 2,000 4,00 22,600 0,00 8,700 26,60 47,900 2,70,900,400 4 20,00 6,000 6,00 27,700 49,900 22,60,00 6,000 9,700 4,0 74,900,90,000 24,000 7 8 22 42,700 9,400 74,000,00 60,400 27,0 42,700 9,400 0,900 0,20 90,600 4,00 64,000 29,00 Rated Loads for Grade 00 Alloy Steel Chain Slings - Choker Hitches Chain Single Leg Double Leg and Single Baskets Triple and Quadruple Leg; Double Baskets Nominal 90 60 4 0 60 4 0 in. mm lb kg lb kg lb kg lb kg lb kg lb kg lb kg 9 2 7,00,600 6,00 2,70 4,900 2,20,00,600 9,00 4,0 7,400,400,200 2,400 8 0 7,00,200 2,00,0 0,000 4,0 7,00,200 8,400 8,00,00 6,800 0,600 4,800 2 2,000,400 20,800 9,40 7,000 7,700 2,000,400,200 4,0 2,00,0 8,000 8,200 8 6 8,00 8,200,00 4,200 2,600,600 8,00 8,200 47,000 2,00 8,400 7,400 27,00 2,00 4 20 28,00 2,800 49,000 22,20 40,000 8,0 28,00 2,800 7,00,400 60,000 27,20 42,400 9,00 7 8 22 4,200,00 9,200 26,80 48,400 2,900 4,200,00 88,900 40,20 72,00 2,900,00 2,20 Note: Angle of choke should be greater than 20 Slings Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn.

c h a i n s l i n g p r o d u c t s Campbell Chain Service Centers Slings Birmingham Area Alabama Sling Center 0 Hoke Ave. Box 20 Dolomite, AL 06 Phone: (20) 744-020 Toll Free: (800) 749-020 Fax: (20) 744-764 Chicago Area Alloy Sling Chain Industries, LTD 406 West 7th Street East Hazelcrest, IL 60429-820 Phone: (708) 647-4900 Toll Free: (800) 2-897 Fax: (708) 647-499 Cleveland Area Commercial Group Lifting Products/Great Lakes 4 East 6th Street Cleveland, OH 440 Phone: (26) 64-400 Fax: (26) 64-84 Detroit Area Commercial Group Lifting Products/Detroit Chain 888 Central Avenue Detroit, MI 48204 Phone: () 9-6 Fax: () 9-4728 Houston Area Bishop Lifting Products, Inc. 2 McCarthy Drive Houston, TX 77029 Phone: (800) 972-04 www.lifting.com Los Angeles Area John A. Batchelor Company 28 East th Street Los Angeles, CA 9002 Phone: (2) 262-42 Fax: (2) 268-8487 Philadelphia Area I & I Sling Company 2626 Market St. Box 242 Aston, PA 904 Phone: (60) 48-800 Fax: (60) 494-8 Pittsburgh Area Safety Sling Company, Inc. 99 Fulton Street Pittsburgh, PA 2 Phone: (42) 2-6684 Fax: (42) 2-669 San Francisco Area Carpenter Rigging & Supply 222 Napolean Street San Francisco, CA 9224 Phone: (4) 28-94 Fax: (4) 28-076 Quebec, Canada St-Pierre Chains & Slings, Ltd 7690 Jarry Street E Anjou, Quebec Canada HJ 2M Phone: (4) 4-429 Fax: (4) 4-09 BC, Canada Wesco Industries, LTD Unit, 966-99A Street langley, BC Canada VM 2X7 Phone: (604) 88-000 Fax: (604) 88-00 San Francisco, CA Los Angeles, CA Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. Chicago, IL Houston, TX Detroit, MI Birmingham, AL Pittsburgh, PA Dependable chain slings. Strong national service network Our service network is composed of eleven authorized service centers in all, each strategically located across the United States and Canada, to offer fast, dependable service for your chain sling requirements. Specifically, our chain sling service program offers on-site chain inspections, including a complete report showing the status of all chain slings and Campbell clamps for your OSHA compliance files. All chain slings are fabricated precisely to Campbell s manufacturing specifications. The program also includes in-plant seminars to educate your employees in proper and safe chain sling procedures. Our Campbell Chain facility in York, PA even conducts chain sling schools, free of charge. Each of our eleven authorized repair facilities has technical and sales support ready to assist you in resolving your overhead lifting needs. Which further proves what we have said all along: Dependable chain slings, strong national service network. Cleveland, OH Philadelphia, PA DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 6

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Campbell manufactures a complete line of standard sling assemblies, as well as assemblies to customer specifications. This work is done WORKING LOAD LIMIT The working load limit (rated capacity) is the maximum combined static and dynamic load in pounds or kilograms which should ever be applied to the product in service, even when the product is new, and when the load is uniformly applied in direct tension to the product. Slings are designated throughout the industry by the symbols. First Symbol (Basic type) S Single Chain Sling with master link and hook, or hook each end. C Single Choker Chain Sling with master link each end. No hooks. D Double Chain Sling with standard master link and hooks. T Triple Chain Sling with standard master link and hooks. Q Quadruple Chain Sling with standard master link and hooks. SB Single basket DB Double basket Second Symbol (Type of master link or end link) O Standard Oblong Master Link Recommended for all types. Third Symbol (Type of Hooks) S Sling Hook G Grab Hook F Foundry Hook SL Self-locking Hook Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. Cam-Alloy Chain Slings at authorized Campbell Sling Service Centers located in strategic areas of the country to provide maximum customer service. Important Chain Terms PROOF TEST The proof test is a quality control test applied to chain for the purpose of verifying weld and material quality. It is the minimum force in pounds or newtons that the chain has withstood in direct tension as part of the manufacturing process. Proof testing assures that the chain is more than capable of performing at its rated working load limit. Proof test loads are a manufacturing integrity test and shall not be used as criteria for service or design purposes. All Campbell chain and components are proof tested in accordance with the applicable ASTM, NACM, OSHA and AISI/ASME requirements. Certificate of Test and Identification Tags Campbell provides information in several forms that enables purchasers and users to operate safely and effectively in conformity with OSHA requirements. The drop forged Identification Tag is attached to the Master End Coupling link of each chain sling and provides the following lifetime information: Grade Working Load Limit (at a specific angle of lift) Serial number Reach Type A Certificate of Test is provided for every Campbell manufactured chain sling. The Campbell Certificate contains all of the information provided on the identification tag, plus the Proof Test load as required by OSHA regulations.. Determine the maximum load to be lifted. 2. Refer to the following pages and choose the proper type of chain sling (single, double, etc.) dictated by the size, shape and weight of the load.. Estimate the approximate angle between a leg of the sling and the load during operation. 4. Select the proper attachments (hooks and master links) for your chain sling.. Determine the overall reach from bearing point on master link to bearing point on attachment. 6. Refer to the Working Load Limit Chart and to your predetermined angle of the type sling you have selected. 7. Choose the chain size which meets your requirements. 8. When entering your order be sure you give complete information as to the size, reach and attachments required. Note: Angle to the load on multiple leg slings will be 60 or greater as long as the distance between lifting eyes of load is not greater than reach shown on identification tag. Identification Tag How to Order Chain Slings Certificate of Test Basic Types of Chain Slings DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. Slings 7

c h a i n s l i n g p r o d u c t s Slings Inspection, Care and Proper Use of Chain Slings Campbell welded chain products and components are designed and built for rugged lasting service. As with any quality product certain precautions and standards of treatment should be observed. Proper care will extend the useful life of the product. INSTRUCTIONS REGARDING COMPONENTS & FITTINGS Components, such as master links and hooks, should have at least the same working load limit (rated capacity) as the chain with which they are used. If not, the sling shall be rated to the capacity of the weakest component. Campbell offers a full line of Cam-Alloy and Quik-Alloy sling components engineered specifically to be compatible with our alloy chain products. S AND CAUTIONS The use of chain, slings, and components are subject to certain hazards that cannot be met by mechanical or manufacturing means, but only by the exercise of intelligence, care, and common sense Sling use is subject to the Occupational Safety & Health Administration (OSHA 29 CFR 90.84) and American Society for Mechanical Engineers (ASME B0.9) safety standards, requiring the sling user to conduct safe working practices and perform inspections Do not exceed the working load limit of the sling or any component Chemically active environments may adversely affect chain slings. Do not use in highly acidic or caustic environments. Campbell should be contacted if the sling will be exposed to chemically active environments during use High and low temperatures will affect chain slings. Campbell should be contacted if temperatures below -20 F (-29 C) will be experienced. The attached Effect of Elevated Temperature on the Working Load Limit of Alloy Chain chart shows the reduction in strength that occurs when chain slings are used at or have been exposed to tempertures above 400 F (204 C) Never field weld or repair a chain sling. Chain slings should only be repaired by a qualified repair facility See other specific information under the Care, Inspection, and Proper Use sections INSPECTION OSHA and ASME safety standards require the user to conduct: a) Frequent Inspections: A visual inspection for damage, which should be performed each day the sling is used. b) Periodic Inspections: A complete link by link and component inspection. Periodic inspection intervals vary depending on sling usage and conditions, but must occur at least annually. Written records of periodic inspections are required. The slings should be inspected for the presence damage. The sling should immediately be removed from service if any of the following conditions are present: Missing or unreadable identification tag Cracks in the chain or any component Excessive nicks, gouges or wear. Chain should be removed from service if the thickness at any point on the link is below the value shown in the attached Cam- Alloy Chain Minimum Allowable Thickness chart. All other components should be removed from service if any dimension is worn more than 0% from the original dimension Stretched, bent, twisted, or distorted chain links or components Excessive corrosion Evidence of heat damage Evidence of field welding or weld spatter Any other condition which questions the integrity of the chain sling Any side movement of the Quik Alloy Coupling Link Pin could indicate excessive wear of the pin or link half and be cause for removal from service Depending on the severity of use and environment, individual Quik-Alloy components should be disassembled so that load pins may be thoroughly inspected CARE Chain slings should be stored in a clean and dry area, preferably on a rack, in order to extend their life Chain slings should not be stored in areas where they would be subject to damage, corrosion, chemical attack, or extreme temperatures Clean slings periodically, as dust and grit can accelerate wear During use, chain slings should not be dragged over abrasive surfaces. Loads should not be rested on the chain sling to avoid damage PROPER USE To protect the operators, the load, and the sling, the following safe practices should be followed. Campbell also recommends compliance with the OSHA and ASME safety standard practices. Select a sling suitable for the load, type of hitch, angle of loading, and environment. The hooks and master links should be of a size to fit the intended connections Avoid shock loading Pad all sharp edges or corners in contact with the sling to prevent damage to either the sling or the load Balance the load to prevent shifting, to maintain control of the load, and to prevent overloading of any leg in a multiple leg sling Rig so that the load is properly seated in the hooks and master link. Avoid tip loading of hooks and side loading of master links Avoid twisting or kinking of sling legs Never knot chain legs Cam-Alloy Chain - Minimum Allowable Thickness Actual Stock Dia. Min. Allowable Thickness on Any Chain Cat. in. mm Drum in. mm in. mm 7 2. 04002.28 6.89 4.80 9 2 7 04022.282 7.29 6.07 8 0 04042.402 0.42 8.69 2 0402.22.44.26 8 6 04062.64 6.46.87 4 20 04072.802 20.687 7.4 7 8 22 04082.88 22.70 9.0 26 04062.000 2.887 22. 4 2 040202.20 2.09 27.7 Effect of Elevated Temperature on the Working Load Limit of Alloy Chain Temperature (F ) (C ) Grade of Chain Grade 80 (System8) Grade 00 (System 0) Reduction of Working Load Limit WHILE AT Temperature Reduction of Working Load Limit AFTER EXPOSURE to Temperature Reduction of Working Load Limit WHILE AT Temperature Reduction of Working Load Limit AFTER EXPOSURE to Temperature < 400 < 204 None None None None 400 204 0% None % None 00 260 % None 2% % 600 6 20% % 0% % 700 7 0% 0% 40% 20% 800 427 40% % 0% 2% 900 482 0% 20% 60% 0% 000 8 60% 2% 70% % >000 >8 OSHA requires that any chain sling which has experienced temperatures in excess of 000 F be removed from service. PROPER USE (continued) Horizontal angles less than 0 should not be used without consulting Campbell or a qualified person For choker hitches, angles of choke greater than 20 should not be used without consulting Campbell or a qualified person. Choker hitches reduce the working load limit by 20% (See pages 86 & 87) For basket hitches, the minimum recommended diameter of the load is 0 times the nominal chain diameter Purchasers please note that all Warnings and Cautions apply to chain, components and fittings, as well as chain slings. Purchasers are responsible for conveying the Warnings and Cautions including the Inspection, Care and Proper Use section information to the end user. Campbell denies any liability for damage that results from use in excess of the working load limit or any abuse or misuse of the product. Any questions concerning the use of Campbell products may be directed to your Apex Tool Group Sales Representative or Customer Service. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 8

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Alloy Chain Slings How Lifting Angles Reduce Working Load Limits of Slings Reduction of Working Load with Varying Lifting Angle Percentages shown are of the maximum Working Load Limit of chain. Normal Working Load Limit of a Standard Sling Cam-Alloy Chain Specifications Cam-Alloy steel chain is electrically welded alloy steel embodying the latest manufacturing technology. Alloy provides a superior chain sling with high tensile strength and excellent wear resistance. The following chains meet or exceed all existing OSHA, ANSI, ASME, NACM and ASTM specification requirements. The Cam-Alloy chain and attachments used in fabricating Campbell chain slings offer a design factor of 4 to. System 8 is Campbell s trade name for Grade 80 chain. System 0 is Campbell s trade name for Grade 00 chain. Nominal Dimensions (in. and mm) Trade Material Inside Dimensions Drum Working Diameter Length Width Cat. UPC Load Limit Feet/ Lb/ Links/ in. mm System in. mm in. mm in. mm 02048 lb kg Drum 00ft. ft. 7 2. 8.22 6.69 8.0 8 04002 062 200 970 800 4 7. 9 2 7 0.29 7.86 22.4 0 04022 82204 400 90 00 74.8 8 0 0.40 0.22.7 4 04042 822 8800 990 00 48 0.0 2 0.2.7 40.7 9 0402 82228,000 6800 00 20 7.8 8 6 0.64 6.9 49.87 22 04062 822 22,600 0,20 200 79 6. Slings 4 20 0.80 20 2.42 6.09 28 04072 82242,00 6,000 00 60 4.9 7 8 22 0.88 22 2.70 69.28 04082 06497 42,700 9,400 00 77 4.4 26 8.00 2 2.80 7.40 6 04062 060 47,700 2,600 00 96 4. 4 2 8.2 2.0 89.7 44 040202 064 72,00 2,800 60 2. The last digit of the catalog number changes to a if a non-standard quantity is ordered. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 9

c h a i n s l i n g p r o d u c t s Cam-Alloy Chain Slings Single Types: S and C Type CO Type SOS Type SOG Type SSG Type SSS Type SOF Type SOSL Chain Nominal Material Oblong Link Inside Dimensions Working Load Limit in. mm System in. mm in. mm in. mm lb kg 9 2 7 0 7 64 2 2 64 27 4,00,90 8 0 0 6 2 76 6 2 8,800 4,000 2 0 8 29 4 02 8 20,000 6,800 8 6 0 8 29 4 02 8 20 22,600 0,00 4 20 0 4 2 4 02 8 20,00 6,000 7 8 22 0 8 4 4 0 2 267 42,700 9,400 26 8 7 8 48 6 2 2 0 47,700 2,600 Width Length Slings 4 2 8 2 7 78 4 6 72,00 2,800 Dimensions are approximate. Single chain slings are available in other combinations. These items are made to order. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 60

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Alloy Chain Slings Double Type: D Type DOS Type DOG Type DOF Type DOSL Working Load Limit Oblong Master Link 60 4 0 Chain Nominal Material Inside Dimensions Width Length Double at 60 Double at 4 Double at 0 in. mm System in. mm in. mm in. mm lb kg lb kg lb kg 9 2 7 0 7 64 2 2 64 27 7,400,400 6,00 2,700 4,00,90 8 0 0 6 2 76 6 2,200 6,900 2,400 6,900 8,800,990 2 0 8 29 4 02 8 20 26,000,800 2,200 9,600,000 6,800 8 6 0 4 2 4 02 8 20 9,00 7,700 2,000 4,00 22,600 0,00 4 20 0 8 4 4 0 2 267 6,00 27,700 49,900 22,600,00 6,000 7 8 22 0 7 8 48 6 2 2 0 74,000,00 60,400 27,0 42,700 9,400 26 8 2 7 78 4 6 82,600 7,900 67,400,000 47,700 2,600 4 2 8 2 4 7 8 20 6 406 2,200 6,800 02,200 46,400 72,00 2,800 Dimensions are approximate. Double chain slings are available in other combinations. These items are made to order. Slings Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 6

c h a i n s l i n g p r o d u c t s Cam-Alloy Chain Slings Triple Type: T Type TOS Type TOG Working Load Limit Oblong Master Link 60 4 0 Chain Nominal Material Inside Dimensions Width Length Triple at 60 Triple at 4 Triple at 0 in. mm System in. mm in. mm in. mm lb kg lb kg lb kg 9 2 7 0 6 2 76 6 2,200,00 9,00 4,00 6,40 2,900 8 0 0 8 29 4 02 8 20 22,800 0,00 8,600 8,400,200 6,000 2 0 4 2 4 02 8 20 9,000 7,700,800 4,400 22,00 0,200 8 6 0 8 4 4 0 2 267 8,700 26,600 47,900 2,700,900,400 4 20 0 7 8 48 6 2 2 0 9,700 4,600 74,900 4,000,000 24,000 7 8 22 0 2 4 7 8 20 6 406 0,900 0,20 90,600 4,00 64,000 29,00 26 8 2 4 7 8 20 6 406 2,900 6,900 0,200 46,00 7,00 2,800 4 2 8 2 4 70 9 229 6 406 87,800 8,200,400 69,600 08,400 49,200 Dimensions are approximate. Triple chain slings are available in other combinations. These items are made to order. Slings Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 62

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Alloy Chain Slings Quadruple Type: Q Type QOS Type QOG Working Load Limit Oblong Master Link Master Coupling Link 60 4 0 Nominal Chain Inside Dimensions Nominal Inside Dimensions Material Width Length Material Width Length Quad at 60 Quad at 4 Quad at 0 in. mm System in. mm in. mm in. mm in. mm in. mm in. mm lb kg lb kg lb kg 9 2 7 0 6 2 76 6 2 7 2 2 8 2 8 67,200,00 9,00 4,00 6,40 2,900 8 0 0 8 29 4 02 8 20 2 2 20 8 4 2 7 8 7 22,800 0,00 8,600 8,400,200 6,000 2 0 4 2 4 02 8 20 2 76 27 9,000 7,700,800 4,400 22,00 0,200 8 6 0 8 4 4 0 2 267 4 2 4 02 6 2 8,700 26,600 47,900 2,700,900,400 4 20 0 7 8 48 6 2 2 0 2 8 4 02 6 2 9,700 4,600 74,900 4,000,000 24,000 7 8 22 0 2 4 7 8 20 6 406 4 44 4 02 6 2 0,900 0,20 90,600 4,00 64,000 29,00 26 8 2 4 7 8 20 6 406 7 8 48 27 7 78 2,900 6,900 0,200 46,00 7,00 2,800 4 2 8 2 4 70 9 229 6 406 2 8 4 6 2 9 229 87,800 8,200,400 69,600 08,400 49,200 Dimensions are approximate. Quadruple chain slings are available in other combinations. NOTE: In practice hooks on Q slings are in the plane opposite that shown. See Oblong Master Link Sub-Assembly for complete dimensions. These items are made to order. Slings Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 6

Miscellaneous Cam-Alloy Chain Slings Types Single Adjustable c h a i n s l i n g p r o d u c t s Chain Nominal Material Oblong Master Link Inside Dimensions Width Length Working Load Limit at 90 in. mm System in. mm in. mm in. mm lb kg 9 2 7 0 7 64 2 2 64 27 4,00,90 8 0 0 6 2 76 6 2 8,800 4,000 2 0 8 29 4 02 8 20,000 6,800 8 6 0 8 29 4 02 8 20 22,600 0,00 4 20 0 4 2 4 02 8 20,00 6,000 7 8 22 0 8 4 4 0 2 267 42,700 9,400 Style A Style B Standard with foot of chain in short leg. 26 8 7 8 48 6 2 2 0 47,700 2,600 4 2 8 2 7 78 4 6 72,00 2,800 Dimensions are approximate. These items are made to order. Cam-Alloy Chain Slings Single Adjustable Loop Oblong Master Link Nominal Chain Inside Dimensions Working Load Limit at 60 Material Width Length in. mm System in. mm in. mm in. mm lb kg 9 2 7 0 7 64 2 2 64 27 7,400,400 8 0 0 6 2 76 6 2,200 6,900 2 0 8 29 4 02 8 20 26,000,800 Slings 8 6 0 4 2 4 02 8 20 9,00 7,700 4 20 0 8 4 4 0 2 267 6,00 27,700 7 8 22 0 7 8 48 6 2 2 0 74,000,00 Style A Style B Standard with foot of chain in short leg. 26 8 2 7 78 4 6 82,600 7,900 4 2 8 2 4 7 8 20 6 406 2,200 6,800 For other angles of lift, refer to type D sling specifications. Dimensions are approximate. These items are made to order. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 64

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Alloy Chain Slings Double Adjustable Oblong Master Link Nominal Chain Inside Dimensions Working Load Limit at 60 Material Width Length in. mm System in. mm in. mm in. mm lb kg 9 2 7 0 7 64 2 2 64 27 7,400,400 8 0 0 6 2 76 6 2,200 6,900 2 0 8 29 4 02 8 20 26,000,800 8 6 0 4 2 4 02 8 20 9,00 7,700 4 20 0 8 4 4 0 2 267 6,00 27,700 7 8 22 0 7 8 48 6 2 2 0 74,000,00 26 8 2 7 78 4 6 82,600 7,900 For other angles of lift, refer to type D sling specifications. Dimensions are approximate. These items are made to order. Style A Style B Standard with foot of chain in short leg. Cam-Alloy Chain Slings Double Adjustable Loop Oblong Master Link Nominal Chain Inside Dimensions Working Load Limit at 60 Material Width Length in. mm System in. mm in. mm in. mm lb kg 9 2 7 0 6 2 76 6 2,200,00 8 0 0 8 29 4 02 8 20 22,800 0,00 2 0 4 2 4 02 8 20 9,000 7,700 8 6 0 8 4 4 0 2 267 8,700 26,600 4 20 0 7 8 48 6 2 2 0 9,700 4,600 7 8 22 0 2 4 7 8 20 6 406 0,900 0,20 26 8 2 4 7 8 20 6 406 2,900 6,900 For other angles of lift, refer to type D sling specifications. Dimensions are approximate. These items are made to order. Style A Style B Standard with foot of chain in short leg. Slings Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 6

c h a i n s l i n g p r o d u c t s Cam-Alloy Chain Sling Single and Double Basket Chain Nominal Material Oblong Master Link Inside Dimensions Width Length Working Load Limit at 60 in. mm System in. mm in. mm in. mm lb kg 9 2 7 0 7 64 2 2 64 27 7,400,400 8 0 0 6 2 76 6 2,200 6,900 2 0 8 29 4 02 8 20 26,000,800 8 6 0 4 2 4 02 8 20 9,00 7,700 4 20 0 8 4 4 0 2 267 6,00 27,700 7 8 22 0 7 8 48 6 2 2 0 74,000,00 26 8 2 7 78 4 6 82,600 7,900 4 2 8 2 4 7 8 20 6 406 2,200 6,800 Single Basket Chain Nominal Material Oblong Master Link Inside Dimensions Width Length Working Load Limit at 60 in. mm System in. mm in. mm in. mm lb kg 9 2 7 0 6 2 76 6 2,200,00 8 0 0 8 29 4 02 8 20 22,800 0,00 2 0 4 2 4 02 8 20 9,000 7,700 8 6 0 8 4 4 0 2 267 8,700 26,600 4 9 0 7 8 48 6 2 2 0 9,700 4,600 7 8 22 0 2 4 7 8 20 6 406 0,900 0,20 Slings Double Basket 26 8 2 4 7 8 20 6 406 2,900 6,900 For other angles of lift, refer to Type D for single basket slings and Type Q for double basket slings. Dimensions are approximate. These items are made to order. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 66

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Alloy Chain Slings Single and Double Endless Basket Oblong Master Link Nominal Chain Inside Dimensions Working Load Limit at 60 Material Width Length in. mm System in. mm in. mm in. mm lb kg 9 2 7 0 7 64 2 2 64 27 4,00,90 8 0 0 6 2 76 6 2 8,800,990 2 0 8 29 4 02 8 20,000 6,800 8 6 0 8 29 4 02 8 20 22,600 0,20 4 20 0 4 2 4 02 8 20,00 6,000 7 8 22 0 8 4 4 0 2 267 42,700 9,400 26 8 7 8 48 6 2 2 0 47,700 2,600 4 2 8 2 7 78 4 6 72,00 2,800 Single Endless Basket Oblong Master Link Nominal Chain Inside Dimensions Working Load Limit at 60 Material Width Length in. mm System in. mm in. mm in. mm lb kg 9 2 7 0 7 64 2 2 64 27 7,400,400 8 0 0 6 2 76 6 2,200 6,900 2 0 8 29 4 02 8 20 26,000,800 8 6 0 4 2 4 02 8 20 9,00 7,700 4 20 0 8 4 4 0 2 267 6,00 27,700 7 8 22 0 7 8 48 6 2 2 0 74,000,00 26 8 2 7 78 4 6 82,600 7,900 4 2 8 2 4 7 8 20 6 406 2,200 6,800 For other angles of lift, refer to Type D for single basket slings and Type Q for double basket slings. Dimensions are approximate. These items are made to order. Double Endless Basket Slings Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 67

c h a i n s l i n g p r o d u c t s Cam-Alloy Chain Slings Double with Links Only Type DOO Chain Nominal Material Oblong Master Link Standard Oblong Link Inside Dimensions Nominal Inside Dimensions Width Length Material Width Length Working Load Limit at 60 in. mm System in. mm in. mm in. mm in. mm in. mm in. mm lb kg 9 2 7 0 7 64 2 2 64 27 7 64 2 2 64 27 7,400,400 8 0 0 6 2 76 6 2 6 2 76 6 2,200 6,900 2 0 8 29 4 02 8 20 8 29 4 02 8 20 26,000,800 8 6 0 4 2 4 02 8 20 8 29 4 02 8 20 9,00 7,700 4 20 0 8 4 4 0 2 267 4 2 4 02 8 20 6,00 27,700 7 8 22 0 7 8 48 6 2 2 0 2 8 4 0 2 267 74,000,00 Slings 26 8 2 7 78 4 6 4 44 6 2 2 0 82,600 7,900 4 2 8 2 4 7 8 20 6 406 2 7 78 4 6 2,200 6,800 Dimensions and weights are approximate. For other angles of lift, refer to Type D slings. These items are made to order. Cam-Alloy Chain Shortener Chain Working Load Limit in. mm System Reach lb kg 9 2 7 0 4,00,90 8 0 0 8,800 4,000 2 0 8,000 6,800 8 6 0 2 0 22,600 0,00 4 20 0 2 4,00 6,000 7 8 22 0 2 8 42,700 9,400 26 8 47,700 2,600 4 2 8 0 72,00 2,800 Dimensions are approximate. These items are made to order. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 68

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Alloy Chain Slings Attachment, One End Only Chain Working Load Limit in. mm System lb kg 9 2 7 0 4,00,90 8 0 0 8,800 4,000 2 0,000 6,800 8 6 0 22,600 0,00 4 20 0,00 6,000 7 8 22 0 42,700 9,400 26 8 47,700 2,600 4 2 8 72,00 2,800 Dimensions are approximate. These items are made to order. Slings Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 69

c h a i n s l i n g p r o d u c t s How Off-Center (Tip) Loading Reduces Working Load Limits of 2 - Cam-Alloy Sling Hooks True /4 in. /2 in. /4 in. Tip Loading Off Center Off Center Off Center Loading,000 lbs.,200 lbs.,80 lbs. 0,600 lbs. 60 lbs. 00% 88% 79% 7% 4% of Rating of Rating of Rating of Rating of Rating Cam-Alloy Sling Hooks Chain Approx. Weight Each Working Load Limit Hook Cat. UPC in. mm System 02048 lb kg lb kg 9 2 7 0 C-80 6464 22220..6 4,00,90 8 0 0 C-8 6466 228 2.7.2 8,800 4,000 2 0 C-82 6468 22286.40 2.4,000 6,800 8 6 0 C-8 6470 2209 0.00 4. 22,600 0,00 4 20 0 C-84 6472 2209.00 6.8,00 6,000 7 8 22 0 C-8 644 2962 8.0 8.4 42,700 9,400 26 8 C-86 646 07889 27.00 2.0 47,700 2,600 Slings Chain Dimensions R T H Ed Es D W OAL OAW in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7 4.0 4.2 2.0 8.7 9.44.4 29.7 9.6 4.9 9 8 0 4.7 2.62 4 2. 4.8 2.94.46 7.0 27 6.9 67 4.0 4 2.70 4.88 48 2.2 7. 29.804 20 2.00.42 6 8.7 2.6 4 8 6 7.47 90 2.4 9 2.62 67..87 22 2.42 6.4 9 0.47 266 6.67 69 4 9 8.00 20 2. 64.00 76.0 8.00 2 2.9 74.8 46.9 294 7.77 97 7 8 22 9.7 248.8 8.7 9 2.00.2 28 2.88 7.88 48.8 40 8.7 222 26 0.8 29.2 8 4.2 08.94 49.8.0 89 2.8 60 4.6 70 9.9 244 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 70

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Alloy Sling Hooks with Latches Chain Approx. Weight Each Working Load Limit in. mm System Hook Cat. UPC 02048 lb kg lb kg 9 2 7 0 C-90 64649 222.24.6 4,00,90 8 0 0 C-9 64669 2290 2.7.22 8,800 4,000 2 0 C-92 64689 222870.6 2.4,000 6,800 Dimensions and weights are approximate. : Do not exceed Working Load Limit. Chain Dimensions R T H Ed Es D W OAL OAW in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7 4.0 4.87 22.0 8.7 9.44.4 29.7 9.6 4.9 9 8 0 4.7 2.4 2. 4.8 2.94.46 7.0 27 6.9 67 4.0 4 2.70 4. 8 2.2 7. 29.804 20 2.00.42 6 8.7 2.6 4 Chain Sling Sling Hook Standard in. mm Hook with Latch Latch 9 2 7 6444 64449 99040 8 0 6446 64469 99060 2 6448 64489 99070 8 6 640 6409 9900 4 20 642 6429 9900 7 8 22 644 6449 99409 26 646 6469 99409 Cam-Alloy Latches (Old Style) Cam-Alloy Latches (New Style) Slings Chain Sling Sling Hook Standard in. mm Hook with Latch Latch 9 2 7 6464 64649 70649 8 0 6466 64669 70669 2 6468 64689 70689 8 6 6470 64709 70709 4 20 6472 64729 70729 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 7

c h a i n s l i n g p r o d u c t s Cam-Alloy Foundry Hooks Chain Approx. Weight Each Working Load Limit in. mm System Hook Cat. UPC 02048 lb kg lb kg 9 2 7 0 C-498 6644 8247 2.2.99 4,00,90 8 0 0 C-499 6646 82464.9.80 8,800 4,000 2 0 C-00 6648 8247 6.7.00,000 6,800 8 6 0 C-0 660 82488 0. 4.80 22,600 0,00 4 20 0 C-02 662 8249.6 7.0,00 6,000 7 8 22 0 C-0 664 2948 24. 0.90 42,700 9,400 26 8 C-04 666 07896.7.0 47,700 2,600 4 2 8 C-0 6620 078972 2.0 2.60 72,00 2,800 Dimensions and weights are approximate. : Do not exceed Working Load Limit. Chain Dimensions R T Ed Es D W H Spherical Radius in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7 4.7 2 2. 64.62 6.47 2.0.00 2.6 40.2 6 8 0.7 46.0 76.7 9.62 6.6 40.2 2.87 47. 8 Slings 2 6.87 74. 89.00 2.7 9.8 46.0 8 2.2 7.7 9 8 6 8.06 20 4.0 02.2 2.87 22 2. 9.7 44 2.62 67.44 4 20 9.2 2 4. 4.0 8.00 2 2.8 7 2.00.00 76.0 7 8 22 0.7 26.0 27.84 47.2 28.08 78 2.2 7.7 86.6 4 26.6 294. 40 2.09.2 2.2 8 2.0 64.7 9.62 6 4 2 2.87 27 6.0 2 2.47 6.7.88 99.00 76 4.2 08.7 9 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 72

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Alloy Grab Hooks Chain Approx. Weight Each Working Load Limit in. mm System Hook Cat. UPC 02048 lb kg lb kg 9 2 7 0 C-72 6244 820.60.27 4,00,90 8 0 0 C-7 6246 820.90.4 8,800 4,000 2 0 C-7 6248 8227.78.8,000 6,800 8 6 0 C-76 620 824 4.4 2.00 22,600 0,00 4 20 0 C-77 622 824 7.0.40,00 6,000 7 8 22 0 C-78 624 2979 2.20.0 42,700 9,400 26 8 C-79 626 0786 9.90 9.0 47,700 2,600 4 2 8 C- 6220 806 8.0 7.0 72,00 2,800 Chain Dimensions R T Ed Es D W OAL OAW in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7 2.0 64.7 9.6 4.7 9.8 2.9.69 94.87 47 8 0 2.4 6.0.7 9.44.6 29.66 7 4.00 02 2.6 6 2.40 86.66 7.2 28.6 4.44 7.88 22.40 7.0 89 8 6 4.22 07.78 20.22.69 8.7 44.2 28 6.66 69 4.2 08 4 20..94 24.44 7.00 2 2.2 4.8 8.28 20.8 2 7 8 22 7.00 78.06 27.7 44.00 2 2.44 62.62 4 0.44 26.68 44 Slings 26 7.98 20.9 0.87 47.2 28.00 76.8 46 2.4 08 6.7 7 4 2 0.00 24.0 8 2.2 7.0 8.7 9 2.2 7.2 87 8.6 29 Dimensions and weights are approximate. Note: Use of chain in a grab hook may reduce the breaking load of the chain by up to 20% Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 7

c h a i n s l i n g p r o d u c t s Self-locking Eye Hooks R U SA A B J G U SA F Fatigue tested to ASTM A92 Meets the intent of OSHA regulation 926.0(g)(4)(iv)(b) Latch closes automatically under load Integrated forged latch with positive lock capability Trigger assembly is completely replaceable Eye style is designed to accommodate heavy duty wire rope thimbles Stamped with recommended wire rope size D E C H Chain Approx. Weight Each Working Load Limit Wire Rope Working Load Limit to * in. mm Cat. UPC 02048 lb kg lb kg in. mm lb kg 9 2 7 64849 9262 2.2.06 4,00,90 7 6,800,724 8 0 64869 9279 4.86 8,800 4,000 2 7,000,7 2 64889 9286 8.6.97,000 6,800 8 6 2,000,44 8 6 64909 929.8 6.0 22,600 0,00 7 8 22 8,000 8,6 *To meet the design requirements of Wire Rope Slings. Chain Dimensions A B C D E F G H J R in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7.87 47.6.000 2.4 0.98 2.8.020 2.9.94 9..62 4. 0.48. 0.87 22.2.20.8.468 8.9 8 0 2.7 60..7 4.9.2 28.6.20.8 4.2 09..87 47.6 0.78 4.7.06 27.0.00 8. 6.00 6. 2.88 8.0.688 42.9.2..796 4.6.404 7. 2.20 7.2 0.688 7..28 2..70 44. 8.70 222. 8 6.00 88.9 2.000 0.8.00 8. 2.69. 6.00 6. 2.7 60. 0.70 9..00 8. 2.000 0.8 0.000 24.0 Slings Repair Kits Hook Cat. UPC in. mm 02048 9 2 7 78849 2078 8 0 78869 2072 2 78889 20600 Repair Kit Contents: Pivot Pin Drive Pins () Trigger Trigger Spring Spring Alignment Insert 8 6 78909 2874 78849 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 74

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Self-locking Swivel Hooks Fatigue tested to ASTM A92 Meets the intent of OSHA regulation 926.0(g)(4)(iv)(b) Latch closes automatically under load Integrated forged latch with positive lock capability Trigger assembly is completely replaceable HOOK IS NOT DESIGNED TO SWIVEL UNDER LOAD Chain Approx. Weight Each Working Load Limit Wire Rope Working Load Limit to * in. mm Cat. UPC 02048 lb kg lb kg in. mm lb kg 9 2 7 79849 22680 2.2.06 4,00,90 7 6,800,724 8 0 79869 226847 4.86 8,800 4,000 2 7,000,7 2 79889 226878 8.6.97,000 6,800 8 6 2,000,44 8 6 79909 22686.8 6.0 22,600 0,00 7 8 22 8,000 8,6 *To meet the design requirements of Wire Rope Slings. Chain Dimensions A B C D E F G H J R in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7.000 76.70 44 0.98 2.8.020 2.9.94 9..62 4. 0.62 6 0.87 22.2.20.8 7.688 9 8 0.00 89 2.000.2 28.6.20.8 4.2 09..87 47.6 0.70 9.06 27.0.00 8. 8.8 224 2 4.00 4 2.00 64.2..796 4.6.404 7. 2.20 7.2.000 2.28 2..70 44..20 286 8 6.62 4.00 89.00 8. 2.69. 6.00 6. 2.7 60..20 2.00 8. 2.000 0.8.48 4 Slings Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 7

c h a i n s l i n g p r o d u c t s Cam-Alloy Oblong Links Approx. Weight Each Working Load Limit 4 to * Link Cat. UPC 02048 lb kg lb kg CO-0 686 07924.0.2 4,200,900 VO- 682 8249.90.86 8,600,900 VO-2 68 826 2.6.9 7,600 8,000 VO- 684 826 6.78.08 0,000,600 VO-4 68 8270 9.20 4.7 4,200 20,00 VO- 686 8287 8.90 8.60 70,600 2,00 VO-6 687 8294 28.7.00 0,900 48,00 CO-7 6870 079 7.80 6.92 02,600 46,600 CO-8 6872 0797 4.00 24.49 44,600 6,700 Link Nominal Diameter Material Inside Used with Type and of Sling Triple or Quad Type T or Q Single Type S & C Double Type D A Width B Length C in. mm in. mm in. mm in. mm in. mm in. mm CO-0 2 0 2 8 76 7 2 6 7 2 6 - - VO- 7 64 2 2 64 27 9 2 7 9 2 7 7 2 6 VO-2 6 2 76 6 2 8 0 8 0 9 2 7 VO- 8 29 4 02 8 20 2 or 8 or 6 2 8 0 VO-4 4 2 4 02 8 20 4 9 8 6 2 VO- 8 4 4 0 2 267 7 8 22 4 9 8 6 VO-6 7 8 48 6 2 2 0 26 7 8 22 4 9 CO-7 2 7 78 4 6 4 or 2 2 or 8 26 -- -- CO-8 2 4 7 8 20 6 406 - - 4 or 2 2 or 8 7 8 or 22 or 26 Dimensions and weights are approximate. Slings Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 76

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Alloy Oblong, Master Link Sub-Assembly Chain Approx. Weight Each Working Load Limit in. mm Cat. UPC 02048 lb kg lb kg 9 2 7 6822 820 4.40 2 2,900,900 8 0 682 82846 9.0 4 26,400 2,000 2 6824 828 6.00 7 4,000 20,00 8 6 682 822.7 4 67,800 0,800 4 20 6826 822 0.00 2 0,900 48,00 7 8 22 6827 67409 6.90 0 28,00 8,200 For construction of Quad Slings, and Double Basket Slings Nominal Diameter Material Oblong Master Link Inside Dimensions Nominal Diameter Material Master Coupling Link Inside Dimensions Chain A Width B Length C D Width E Length F in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7 6 2 76 6 2 7 2 2 8 2 4 70 8 0 8 29 4 02 8 20 2 2 20 9 6 40 2 7 8 7 2 4 2 4 02 8 20 2 76 27 8 6 8 4 4 0 2 267 4 2 4 02 6 2 Slings 4 20 7 8 48 6 2 2 0 2 8 4 02 6 2 7 8 22 2 4 7 8 20 6 406 4 44 4 02 6 2 Dimensions and weights are approximate. These items are made to order. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 77

c h a i n s l i n g p r o d u c t s Quik-Alloy Chain Slings The Campbell Quik-Alloy system provides proof tested and certified components for easily and quickly assembling all of the popular types of chain slings plus many special slings. Hooks and coupling links have rotating load pins that resist bending and offer shear values equivalent to the chain. The open design of the hooks allows for easy inspection. All Quik- Alloy components are sized and identified according to the chain with which they are to be used. They meet or exceed all OSHA, ANSI, and ASME specifications. How to Design Quik-Alloy Chain Slings. Determine the maximum LOAD to be lifted. 2. Choose the TYPE of sling assembly necessitated by the size and dimension of the load.. Estimate the approximate ANGLE to the load in which the legs of the assembly will be positioned for operation. 4. Determine the SIZE OF CHAIN ATTACHMENTS by referring to the Assembly Tables that follow. On multi-leg slings, if the distance between the points of attachment equals the reach of the sling, the angle is approximately 60. Determine the overall REACH (see illustration). Use the Assembly Tables that follow to determine length of Cam- Alloy chain to order. 6. Attach field identification tag to all slings. One box of 0-7006. For any problem involving reach, angle of lift or working load limit, consult your local Campbell distributor. Remember to use only Campbell Quik-Alloy components in assembling chain slings. SUBSTITUTION OF ANY COMPONENTS WITH PARTS NOT INDICATED ON THE CHART COULD SERIOUSLY DIMINISH THE WORKING LOAD OF THE ASSEMBLY. Do not use any coupling links to repair damaged or broken chain. It is imperative that such chain be replaced. How to Assemble Quik-Alloy Coupling Links Slings. Loop one half of body over the master link at the flat embossed area, the other half through the chain. Fit together. 2. Place stud assembly and alloy locking pin in link as shown.. Drive the locking pin in until the snap ring engages the recessed portion of the pin. (Link is disassembled by simply driving locking pin out.) Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 78

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell How to Use Quik-Alloy Chain Sling Assembly Tables If the overall reach of your sling is determined to be more than five feet, subtract five feet, then add this difference to the chain needed length given on the Assembly Table. If overall reach is less than five feet, subtract reach from five feet.then subtract the difference from the chain needed length in the Assembly Table. All measurements are based on using Quik-Alloy hooks (not Cam-Alloy hooks). WHEN USING QUIK-ALLOY HOOKS (NOT CAM-ALLOY HOOKS), BE SURE THAT EACH LEG OF A DOUBLE SLING HAS THE SAME, EVEN (DIVISIBLE BY TWO) NUMBER OF LINKS. For triple or quad slings, each leg should have odd numbers of links to compensate for coupling links on master link sub-assembly. When cutting, if the required reach falls within a link, LEAVE THAT LINK. Reach measurements are given as a minimum. Never cut less than specified reach. Quik-Alloy Chain Sling Assembly Tables in. mm in. mm in. mm in. mm in. mm Chain 9 2 7 8 0 2 8 6 4 9 Single Chain Slings: Types S and C lb kg lb kg lb kg lb kg lb kg Working Load Limit 4,00,92 8,800,99,000 6,80 22,600 0,260,00 6,026 Master Link Number VO- VO-2 VO- VO- VO-4 Master Link 682 68 684 68 686 Cat. QA Sling Hook 7444 7446 7448 740 742 QA Grab Hook 7244 7246 7248 720 722 QA Coupling Link 7792 779 7794 779 7796 Chain needed Sling Hook 4 0 7 for reach Grab Hook 4 4 0 9 8 6 Double Chain Slings: Type D lb kg lb kg lb kg lb kg lb kg 60 7,00,40,200 6,90 26,000 77,804 9,00 7,7 6,00 27,79 Working Load Limit 4 6,00 2,769 2,400,60 2,200 9,62 2,000 4,28 49,900 22,6 0 4,00,92 8,800,99,000 6,80 22,600 0,260,00 6,026 Master Link Number VO- VO-2 VO- VO-4 VO- Master Link 682 68 684 68 686 Cat. QA Sling Hook 7444 7446 7448 740 742 QA Grab Hook 7244 7246 7248 720 722 QA Coupling Link 7792 779 7794 779 7796 Chain needed Sling Hook 4 0 7 for reach Grab Hook 4 4 0 9 8 Triple Chain Slings: Type T and Quad Chain Slings: Type Q Slings lb kg lb kg lb kg lb kg lb kg 60,200,08 22,800 0, 9,000 7,706 8,700 26,60 9,700 4,62 Working Load Limit 4 9,00 4, 8,600 8,444,800 4,47 47,900 2,747 74,900 4,00 0 6,40 2,928,200,99 22,00 0,2,900,9,000 24,062 Master Link Number VO-2 VO- VO-4 VO- VO-6 Sub-Assembly 6822 682 6824 682 6826 Cat. QA Sling Hook 7444 7446 7448 740 742 QA Grab Hook 7244 7246 7248 720 722 QA Coupling Link 7792 779 7794 779 7796 Chain needed Sling Hook 0 6 2 2 0 2 for reach Grab Hook 8 4 2 0 2 8 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 79

c h a i n s l i n g p r o d u c t s Quik-Alloy Coupling Links How to Assemble:. Loop one half body through attachment, the other through chain. Fit together. 2. Place stud assembly and alloy locking pin in link.. Drive the locking pin in until the snap ring engages the recessed portion of the pin. (Link is disassembled by simply driving locking pin out.) 4. Per ASME B0.9, Section 9... Mechanical coupling links shall not be used within the body of an alloy chain sling to connect two pieces of chain. Chain Approx. Weight Each Working Load Limit Cat. UPC in. mm System 02048 lb kg lb kg 7 2. 8 770 07999.0.0 2,00 970 9 2 7 0 7792 8274.27. 4,00,90 8 0 0 779 8276..2 8,800 4,000 2 0 7794 82860.6.7,000 6,800 8 6 0 779 82778 2.70.2 22,600 0,00 4 * 9 0 7796 8278 4.0.9,00 6,000 7 8 * 22 0 7797 08000 4..97 42,700 9,400 26 8 776 080067 8.4.82 47,700 2,600 4 2 8 7720 080074.74 7.4 72,00 2,800 Pins and Retainers 9 2 7 0 78442 82792.02.009 - - 8 0 0 7844 82808.06.027 - - 2 0 78444 828..00 - - 8 6 0 7844 82822.7.077 - - 4 * 9 0 78446 8289..9 - - 7 8 * 22 0 7846 8740 - - - - Slings Chain Dimensions A B C D E F G Max. Mat. Dia in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 7 2. 7 64 7 7 2 6 6 7 6 2 4 7 2 9 8 0 2 9 2 7 8 0 2 9 2 2 44 9 6 4 64 8 60 8 0 7 64 8 0 2 7 6 2 8 60 6 2 6 8 2 7 6 62 2 64 9 6 2 2 6 7 9 6 4 76 2 26 2 64 0 8 86 29 64 2 6 0 8 6 6 2 2 2 8 7 8 98 9 2 2 2 29 2 99 64 4 6 4 20 6 24 6 64 24 4 8 7 9 6 40 9 6 4 4 4 2 * 6 6 4 7 8 22 6 0 6 24 8 7 6 46 4 64 6 6 * 0 7 8 48 26 64 9 64 29 7 8 49 2 2 2 6 7 7 8 49 8 2 8 4 4 2 2 8 8 7 8 87 2 9 2 8 6 24 6 6 76 8 4 2 2 60 Dimensions and weights are approximate. * 4 and 7 8 use special oversize retainers. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 80

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Quik-Alloy Sling Hooks, Regular Chain Approx. Weight Each Working Load Limit Cat. UPC in. mm 02048 lb kg lb kg 9 2 7 7464 22244..68 4,00,90 8 0 7466 22606 2.8.27 8,800 4,000 2 7468 22286 6.6.0,000 6,800 8 6 7470 222 0. 4.76 22,600 0,00 4 20 7472 2247 7.6 7.98,00 6,000 Chain Dimensions R T U A E Load Pin Dia. D W HP OAW in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7 4 9 4 2 6 27 6 8 2 9 8 0 8 29 4 9.78 4 7 8 98 8 0 4 4 2 6 4 6 7 6 2 2 7 6 7 2 2 8 60 4 2 4 2 4 46 7 8 48 2 8 9 6 4 8 6 8 6 2 0 8 6 76 6 2 8 6 7 78 2 8 9 4 44 2 2 8 4 9 4 9 2 8 60 2 9 76 6 9 6 69 4 20 7 4 97 2 2 64 2 6 6 6 2 7 8 22 6 2 2 7 8 74 4 44 8 86 7 4 97 Dimensions and weights are approximate. Quik-Alloy Sling Hooks, Latched Chain Approx. Weight Each Working Load Limit Cat. UPC in. mm 02048 lb kg lb kg 9 2 7 74649 2227..68 4,00,90 8 0 74669 2276 2.8.27 8,800 4,000 2 74689 222849 6.6.0,000 6,800 8 6 74709 220 0. 4.76 22,600 0,00 4 20 74729 226 7.6 7.98,00 6,000 Chain Dimensions R T U A E Load Pin Dia. D W HP OAW in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7 4 9 4 2 6 27 6 8 2 9 8 0 8 29 4 9.78 4 7 8 98 Slings 8 0 4 4 2 6 4 6 7 6 2 2 7 6 7 2 2 8 60 4 2 4 2 4 46 7 8 48 2 8 9 6 4 8 6 8 6 2 0 8 6 76 6 2 8 6 7 78 2 8 9 4 44 2 2 8 4 9 4 9 2 8 60 2 9 76 6 9 6 69 4 20 7 4 97 2 2 64 2 6 6 6 2 7 8 22 6 2 2 7 8 74 4 44 8 86 7 4 97 Dimensions and weights are approximate. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 8

c h a i n s l i n g p r o d u c t s Quik-Alloy Latches (Old Style) Chain Sling Sling Hook Standard in. mm Hook with Latch Latch 9 2 7 7444 74449 99040 8 0 7446 74469 99060 2 7448 74489 99070 8 6 740 7409 9900 4 20 742 7429 9900 Quik-Alloy Latches (New Style) Chain Sling Sling Hook Standard in. mm Hook with Latch Latch 9 2 7 6464 64649 70649 8 0 6466 64669 70669 2 6468 64689 70689 8 6 6470 64709 70709 4 20 6472 64729 70729 Quik-Alloy Grab Hooks Chain Approx. Weight Each Working Load Limit Cat. UPC in. mm 02048 lb kg lb kg 9 2 7 7244 82600..2 4,00,90 8 0 7246 8267.6.7 8,800 4,000 2 7248 82624 2.6.8,000 6,800 8 6 720 826.2 2.6 22,600 0,00 4 20 722 82648 0. 4.77,00 6,000 Slings Chain Dimensions R T A E Load Pin Dia. D W HP OAW in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7 2 2 60 8 0 6 8 2 9 8 0 6 2 8 6 4 2 2 8 0 2 29 2 74 2 7 6 2 2 4 2 4 9 8 4 2 6 7 2 2 2 94 2 2 7 9 6 4 8 6 8 6 2 8 6 24 2 2 89 8 6 4 7 6 2 2 20 2 2 8 4 9 4 9 4 44 7 2 2 8 67 4 8 0 4 20 8 0 2 2 6 2 7 8 22 7 8 22 2 8 4 8 4 8 4 7 8 24 Dimensions and weights are approximate. Note: Use of chain in a grab hook may reduce the breaking load of the chain by up to 20% Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 82

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Cam-Lok Self-locking Clevis Hooks Fatigue tested to ASTM A92 Meets the intent of OSHA regulation 926.0(g)(4)(iv)(b) Latch closes automatically under load Integrated forged latch with positive lock capability Trigger assembly is completely replaceable Chain Approx. Weight Each Working Load Limit Cat. UPC in. mm 02048 lb kg lb kg 9 2 7 74849 909 2..06 4,00,90 8 0 74869 96 4..86 8,800 4,000 2 74889 92 8.7.97,000 6,800 8 6 74909 90. 6.0 22,600 0,00 Chain Dimensions A B C D E F G H J R in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 9 2 7 0.2 7.9 0.7 9. 0.98 2.8.020 2.9.94 9..62 4..000 2.4 0.87 22.2.20.8 4.688 9. 8 0 0.48. 0.00 2.7.2 28.6.20.8 4.2 09..87 47.6.2 28.6.06 27.0.00 8..6 4. 2 0.6 4. 0.62.9.2..796 4.6.404 7. 2.20 7.2.00 8..28 2..70 44. 6.844 7.8 8 6 0.79 8. 0.70 9.0.00 8. 2.69. 6.00 6. 2.7 60..62 4..00 8. 2.000 0.8 8.20 209.6 Repair Kit Contents: Pivot Pin Drive Pins () Trigger Trigger Spring Spring Alignment Insert Cam-Lok Repair Kits Slings Hook in. mm Cat. UPC 02048 9 2 7 78849 2078 8 0 78869 2072 2 78889 20600 8 6 78909 2874 78849 Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 8

c h a i n s l i n g p r o d u c t s Miscellaneous Cam-Alloy Sling Products J Hooks Nominal Dia. Material Approx. Weight Each Working Load Limit Cat. UPC Style in mm 02048 lb kg lb kg A 4 9 662 078484.2.4 2,20,000 B 26 666 07849 2.8.27,600,600 *A 26 6666 89777 2.8.27,600,600 Nominal Dia. Dimensions Material B R C D E F G H Style in. mm in. mm Angle in. mm in. mm in. mm in. mm in. mm A 4 9. 2 2.69 68 4.8 2.06 2.8 0 2 2 B 26 2.00 90.64 92 6.7 7 4.00 02.28 7 2 2 *A 26 2.00 90 4. 0 6.7 7.88 99.28 7 2 2 *Available on special order only. Dimensions and weights are approximate. S Hooks Slings Nominal Dia. Dimensions Approx. Working Material Cat. UPC A B C R Weight Each Load Limit in. mm 02048 in. mm in. mm in. mm in. mm lb kg lb kg 9 2 7 6040 078262 2.7 70.7 9.8 0.8 0.07.0 20 0 8 0 6060 078279 4. 0. 29.6 4.6 4.. 00 200 2 6080 078286.0 40.0 8.7 9.7 9.9.27,000 00 8 6 600 07829 7.00 78.88 48.94 24.94 24.24.6,00 700 4 9 620 07809 8.2 20 2.2 7. 29. 29 2..0 2,000 900 7 8 22 640 880 9.6 24 2.6 67...0.8 2,700,200 26 660 0782.00 279.00 76.0 8.0 8 4.4 2.02,200,00 8 29 680 802 2. 08.8 86.69 4.69 4 6.48 2.94,00,600 Dimensions and weights are approximate. These items are made to order. Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 84

c h a i n s l i n g p r o d u c t s www.apexhandtools.com/campbell Magnet Chains (bell type) The Campbell Magnet Bell Alloy casting with no moving parts Designed for operational ease and long life Supplied with Quik-Alloy coupling links Equally spaced legs All legs operate without twist Entire assembly is proof tested alloy steel Bell stands upright when at rest Chain Chain Magnet Diameter Bell Dimensions Standard Total Reach Dimensions Length of Two Links Approx. Wgt. of Assy. Approx. Weight Each Inside Dimensions Working Load Limit in. mm Cat. UPC 02048 in. mm in. mm in. mm lb kg lb kg lb kg Bell Type 4 20 042 7998 9-44 99-8 2 8 4 8 7 4 7 7 9,700 27,00 7 8 22 044 79946 44-4 8-4 2 902 4 7 8 24 92 42 7 7 74,700,900 26 046 7992 4-60 4-24 9 2 00 8 4 7 62 60 27 00,600 4,700 4 2 0420 79969 60 & over 24 & over 49 2 27 7 78 28 27 24 6 49,400 67,800 Length of Two Links Dia. X X W L W Width Length in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm Bell Type 4 20 2 2 4 4 08 7 78 76 7 8 22 2 6 2 4 8 7 8 22 2 2 4 4 08 7 78 76 2 2 8 4 6 2 4 7 8 24 26 2 4 70 2 4 7 6 2 8 20 2 89 8 29 2 4 7 6 2 8 4 4 2 2 2 64 2 2 64 7 2 9 279 6 2 2 8 2 8 67 7 78 7 78 Reach shown is standard unless otherwise specified. If additional reach is required, add 2 link increments to each leg. Dimensions and weights are approximate. These items are made to order. These tags are designed for field attachment. They are prestamped for easy addition of reach, working load limit, chain size, chain grade and sling serial number. Each steel tag measures 2 x 4 8 x 2 thick and has a 6 -diameter hole. Cut at top of tag allows you to attach to sling link. Also available solid (without split). Box of 0 tags (order unit is Carton ). Field I.D. Tags Slings Type Cat. UPC 02048 Tags Per Carton Split 7006 09 0 Solid 7006C 279 0 7006 7006C Para prevenir la posibilidad de una lesión personal sería: NO EXCEDA los límites de carga de las cadenas o componentes. NO LA UTILICE si la cadena o los componentes están visualmente distorsionados o gastados. DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 8

c h a i n cs hl ia ni g n ps lr io nd g u cp tr s o di nu dc te sx Cat. Page Cat. Page Cat. Page Cat. Page Slings 04002... 8, 9 64729... 7, 82 04062... 8, 9 64849...74 040202... 8, 9 64869...74 04022... 8, 9 64889...74 04042... 8, 9 64909...74 0402... 8, 9 666...72 04062... 8, 9 6620...72 04072... 8, 9 6644...72 04082... 8, 9 6646...72 042...8 6648...72 044...8 660...72 046...8 662...72 0420...8 664...72 99040... 7, 82 6822... 77, 79 99060... 7, 82 682... 77, 79 99070...7 6824... 77, 79 99080...82 682... 77, 79 9900... 7, 82 6826... 77, 79 990...82 6827...77 99409...7 682... 76, 79 6040...84 68... 76, 79 6060...84 684... 76, 79 6080...84 68... 76, 79 600...84 686... 76, 79 620...84 687...76 640...84 686...76 660...84 6870...76 680...84 6872...76 662...84 7244... 79, 82 666...84 7246... 79, 82 6666...84 7248... 79, 82 626...7 720... 79, 82 6220...7 722... 79, 82 6244...7 7444... 79, 82 6246...7 74449...82 6248...7 7446... 79, 82 620...7 74469...82 622...7 7448... 79, 82 624...7 74489...82 646... 70, 7 740... 79, 82 6469...7 7409...82 6444...7 742... 79, 82 64449...7 7429...82 6446...7 7464...8 64469...7 74649...8 6448...7 7466...8 64489...7 74669...8 640...7 7468...8 6409...7 74689...8 642...7 7470...8 6429...7 74709...8 644... 70, 7 7472...8 6449...7 74729...8 6464... 70, 7, 82 74849...8 64649... 7, 82 74869...8 6466... 70, 7, 82 74889...8 64669... 7, 82 74909...8 6468... 70, 7, 82 770...80 64689... 7, 82 776...80 Para prevenir la posibilidad de una lesión personal sería: 6470... 70, 7, 82 7720...80 NO EXCEDA los límites de carga de las cadenas o componentes. 64709... NO LA UTILICE si la cadena 7, o 82 los componentes 7792... están visualmente 79, 80 6472... distorsionados o gastados. 70, 7, 82 779... 79, 80 7794... 79, 80 779... 79, 80 7796... 79, 80 7797...80 7846...80 78442...80 7844...80 78444...80 7844...80 78446...80 78849... 74, 8 78869... 74, 8 78889... 74, 8 78909... 74, 8 79849...7 79869...7 79889...7 79909...7 7006...8 7006C...8 70649... 7, 82 70669... 7, 82 70689... 7, 82 70709... 7, 82 70729... 7, 82 DO NOT EXCEED the working load limits for chain or components. DO NOT USE if the chain or components are visibly distorted or worn. 86

Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp.

l i f t i n g c l a m p s Campbell Clamps Table of Contents Though it began manufacturing operations in 866, Campbell first made its lightweight, rugged plate lifting clamp in 98. It was designed by an Englishman named Volz. Because it incorporated forged parts of heat treated, alloy steel, the Campbell clamp earned a worldwide reputation for reliability and long life. It is widely used by steel mills, warehouses and fabricating shops and is much preferred because its forged parts give increased strength yet are lightweight. And, they are readily available when servicing is required. Contents Page Clamps, Chain Connector 9 Clamps, GX 92-96 Clamps, GXL 90-9 Clamps, Horizontal Plate 202 Clamps, Locking E 97-98 Clamps, Non-Marring, Rubber Pad 9-96 Clamps, SAC (Screw-Adjusted Cam) 99-200 Clamps, Sharp Leg 20 Clamps, Short Leg Structural 9-94 Drum Deheader 20 Drum Lifter, Fork Truck 206 Drum Lifter, Single 20 Drum Lifter, Twin 204 Grip, Duplex Hand 20 Inspection of Clamps 89 Slings, Drum 204 Warning Statement 89 Campbell Clamps Numerical Index 207 The Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 900. Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 88

l i f t i n g c l a m p s www.apexhandtools.com/campbell Campbell clamps are known and used throughout the world for lifting, conveying and positioning of sheet, plate, weldments and structurals. The heavier the load, the tighter they grip. Parts are drop forged for strength, dependability and long life, and all clamps are individually proof tested. Replacement parts are available when needed. If you have any doubts as to the clamp best suited to your application, contact your Apex Tool Group salesman. NOTICE: The product specifications and dimensions are as accurate as possible at the time of printing. However, because we are constantly improving the quality and design of our products, they can change without notice. All Working Load Limits are expressed in Metric Tons. Metric Ton = 2,204.6 lbs. Campbell Lifting Clamps. Do not exceed Working Load Limit stamped on Clamp body. 2. Inspect clamp before each lift.. Stand clear of load when lifting. 4. Position clamp to balance load.. Insert plate or unit to full depth of throat opening. 6. Lift slowly and smoothly. Do not jerk load. 7. Do not lift more than one plate or sheet at a time. 8. Do not use a damaged clamp. 9. Read manufacturer s instructions before using clamps. 0. Do not use any Campbell clamp to lift tapered plates or beams.. When lifting plates with a hardness over 4 Rockwell C/400 BRINELL, use non-marring clamps only. 2. Campbell clamps are designed to be used at temperatures between 0 F and 200 F. Inspection, Maintenance & Repair It is important to establish a regular procedure for clamp inspection. Frequency of inspection will depend upon the amount of use the clamp receives. Campbell clamps are built to withstand rough treatment, however, grit, dirt, sludge and mud should be removed. This may be done easily by immersing the entire clamp in a can of degreaser and leaving it there overnight. Also, periodic oiling of all pins and rivets will improve performance and help to extend the life of the clamp. You may wish to maintain a written record, indicating inspection dates, condition of the clamp on each of those dates, and any repairs made. Inspection records should be reviewed periodically.. Cams These are the parts likely to receive most wear. The amount of wear, of course, bears a direct relationship to the use the cam receives. Continued usage of plates of the same thickness will result in wear in only one area of the working surface of the cam, and will eventually require that the cam be replaced. The harder the plate is, the sooner the cam will be worn. A simple visual inspection of the cam is all that is required in most cases. The surfaces of the cam should be compared with unused surfaces. If any one tooth is worn or chipped more than 0% along the length of its crown, the cam should be replaced. Note: The Pad and Cam should be replaced at the same time. 2. Pads The pads of GX and E clamps are held in with a bolt and can be replaced simply by removing the bolt. If any one tooth is worn or chipped more than 0% along the length of its crown, the pad should be replaced. Note: The Pad and Cam should be replaced at the same time.. Spread Jaw Check the throat width of the clamp. At zero grip, the cam should be in full contact with the pad. If the width at the base (where the pad is located) is greater than the width at the top, the clamp has been overloaded and should be replaced. Warning: Do not weld on the clamp body, as this may destroy the original heat treatment. 4. Linkage and Shackle Inspection To remove the linkage from a GX clamp, remove the load pins from the body. The pins do not Inspection Procedure rotate, and under normal load do not require replacement. They should be inspected for bending, which is caused by overloads, and replaced as needed. Inspect the shackle for bending at the rivet, which is an indication of side pull. If this is a recurrent fault, use a chain connector on the clamp.. Rivet Inspection Rivets may require replacement when a very loose connection is detected. Linkage should normally be free working. Should a rivet hole in the shackle, radius link or connecting link become stretched or enlarged (usually resulting from overloading), those parts should be replaced. It is advisable to replace the rivet as well. To replace any worn parts, drive rivets out over a relief opening, such as a small section of pipe or the opening in a vise. Warning: Do not weld or substitute bolts for rivets. Check connecting links to ascertain that they are not bent. 6. Spring inspection The spring should be of sufficient strength to hold the cam against the pad. If it is not, the spring should be replaced. In the case of the E clamp, the spring should be replaced if it fails to provide initial pressure at near zero grip. 7. Chains Chains supplied with clamps should also be inspected carefully. To do this, use a Campbell wear gauge. Inspect chains link by link, checking for distorted, stretched or cracked links, nicks or gouges, pitted links and excessive wear of bearing surfaces and barrels. Las mordazas en este catálogo no fueron diseñadas para ser utilizadas como conexión permanente de una placa o de otros objetos. El agarre depende de la fricción y de la presión entre ambas piezas. Si no se les da mantenimiento adecuado a las superficies de agarre y se utiliza la mordaza de manera inadecuada se puede caer la carga. Tenga mucha precaución cuando se va a elevar carga por encima de objetos o donde una falla puede ocasionar daños a la propiedad o lesiones personales. Lea los instructivos de uso y de mantenimiento. Clamps Seleccione The clamps el in tamaño this catalog de mordaza are not adecuado intended to para serve el trabajo. as a permanent connection to Select a plate proper or other size object. clamp for the job. Determine The grip depends el peso on de friction la placa and a ser a camming alzada. action. If the gripping surfaces are not Determine properly maintained the weight and of the the plate clamp to be is improperly lifted. used, the load may fall. No Use exceda extreme el caution limite de where carga overhead de trabajo lifting (WLL) is involved mostrado or en where la mordaza. a failure could cause Do property not exceed damage WLL (Working personal Load injury. Limit) shown on clamp. El Read espesor maintenance de la placa materials debe estar and use dentro instructions. de la gama de agarre mostrada en la mordaza. Plate thickness must be within grip range shown on clamp. 89

l i f t i n g c l a m p s GXL Clamps NORMAL WORN Available in a /2,, 2, and ton capacity Can be used for both vertical and horizontal to vertical lifting through 80 Drop forged and heat treated components, with gripping surfaces of case hardened alloy steel Exclusive feature is a patented wear indicator system. When any of cam s straight line, convex teeth are flattened between unique wear indicator grooves, it is time to change the cam Note: The Pad and Cam should be replaced at the same time Newly designed Cam Engaging Locking Lever keeps the cam in contact with the plate. The tension arm and spring mechanism facilitate attaching and removing the clamp. These clamps will not lift plate when in the lever open position Clamps are 00% Proof Tested and Certificate of Test supplied with each clamp Warning: Never tamper with a clamp s tension arm and spring mechanism during a lift Cat. Working Grip Range Clamp Weight Load Limit UPC 0248 in. mm in. mm Metric Ton 642202 87049 6-8 2-6. 2.0 2 642200 8687 6-4 2-9 8.6 6422002 8702 6-7 8 2-2 0. 4.77 2 Cat. UPC 0248 Dimensions A B C D E F G H I in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 642202 87049 6 0 24 2 8 4 2 8 67 2 4 02 4 8 6 0 6 2 642200 8687 6 9 6 67 4 286 6 97 6 78 2 6 2 27 8 92 8 4 7 8 49 6422002 8702 7 4 84 2 8 08 2 9 6 6 6 84 2 4 7 4 7 8 24 2 89 8 4 6 Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 90

l i f t i n g c l a m p s www.apexhandtools.com/campbell Replacement Part Kits for GXL Clamps 606200 Shackle Kit Components Note: Shackle Kit is supplied pre-assembled (as shown above), to ensure proper assembly of linkage. 60620 Cam / Pad Kit Components Capacity 2 TON TON 2 TON Part Name Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Shackle Kit 606200 20204 60620 20228 606220 20242 Kit Includes: Shackle, Radius Link, T-Spring, 2 Connecting Links, Radius Link Pin, Pivot, Lever, E-Spring, Drive Pin, Linkage Rivets Cam / Pad Kit 60620 202 6062 202 60622 2029 Kit Includes: Cam, Pad, Cam Pin, Pad Pin, T-Spring, E-Spring, Rivet, 4 Sel-locs Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 9

l i f t i n g c l a m p s GX Clamps GX clamp is entirely drop forged and heat treated Can be used for both vertical and horizontal-to-vertical lifting Exclusive feature is a patented wear indicator system. When any of cam s straight line, convex teeth are flattened between unique wear indicator grooves, it is time to change the cam Note: The Pad and Cam should be replaced at the same time Clamps are 00% Proof Tested and Certificate of Test supplied with each clamp Cat. Grip Range Clamp Weight Working Load Limit UPC 0248 in. mm in. mm Metric Ton 642000 7299 6-8 - 6 4 2 2 642920 767 8-8 6-28 2 2 64200 7220 6-4 - 9 8 4 64292 7664 4-8 9-9 4 64200 72229 6 - - 2 7 8 64292 767-4 2-44 20 9 6420 778 2-2 - 40 8 Cat. UPC 0248 Dimensions A B C D E F G H I in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 642000 7299 4 02 9 2 24 2 6 6 2 4 67 2 4 8 0 2 7 8 7 8 4 7 8 24 642920 767 27 9 2 24 2 6 6 2 8 67 2 4 8 0 2 7 8 7 8 4 4 7 8 24 64200 7220 4 4 2 4 286 6 78 6 78 2 6 2 4 8 92 8 4 7 8 49 64292 7664 7 8 49 4 286 6 78 6 78 2 6 2 4 8 92 8 4 7 8 49 64200 72229 6 2 4 6 9 6 90 6 97 76 6 4 7 4 7 6 2 7 8 94 64292 767 7 4 84 4 6 9 6 90 6 97 76 6 4 7 4 7 6 2 4 7 7 8 94 6420 778 8 7 8 22 20 08 4 6 9 27 6 00 8 4 29 6 6 97 9 6 22 Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 92

l i f t i n g c l a m p s www.apexhandtools.com/campbell Short Leg Structural GX Clamps Designed for a secure bite on small or odd shaped, wide flanged beams Can be used for both vertical and horizontal to vertical lifting through 80 Replacement parts are same as for standard GX clamps Note: The Pad and Cam should be replaced at the same time Clamps are 00% Proof Tested and Certificate of Test supplied with each clamp Cat. Grip Range Clamp Weight Working Load Limit UPC 0248 in. mm in. mm Metric Ton 64200 770 6-8 - 6 4 2 2 6420 7747 6-4 - 9 7 64208 804 6-7 8-22 7 2 6420 774 6 - - 2 8 8 Cat. UPC 0248 Dimensions A B C D E F G H I in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 64200 770 4 02 9 2 24 2 8 4 2 8 67 2 4 6 0 2 7 8 7 8 4 4 2 6420 7747 4 4 2 6 287 2 8 67 6 78 2 6 2 4 7 8 24 9 6 90 2 2 42 6 48 64208 804 8 0 2 8 08 2 8 67 6 84 2 4 7 27 9 6 90 8 4 6 6420 774 6 2 6 8 7 6 87 6 97 76 6 9 6 67 4 6 06 2 7 6 86 Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 9

l i f t i n g c l a m p s Replacement Part Kits for GX Clamps 606000 Shackle Kit Components Note: Shackle Kit is supplied pre-assembled (as shown above), to ensure proper assembly of linkage. 60600 Cam / Pad Kit Components Clamp Kit Parts Listing for GX Series Lifting Clamps (Includes ALL GX, GX Short Leg Structural, and GX Sharp Leg Clamps) Capacity 2 TON TON 2 TON TON TON Part Name Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Shackle Kit 606000 200 60600 2007 606020 200 60600 2007 60600 20099 Kit Includes: Shackle, Radius Link, T-Spring, 2 Connecting Links, Radius Link Pin, Linkage Rivets, 4 Sel-locs Clamps Cam / Pad Kit 60600 20020 6060 20044 60602 20068 6060 20082 6060 200 Kit Includes: Cam, Pad, Cam Pin, Pad Pin, T-Spring, Rivet, 4 Sel-locs Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 94

l i f t i n g c l a m p s www.apexhandtools.com/campbell Chain Connector Clamps This clamp comes fitted with the chain connector in place of the clamp shackle. Use of this clamp increases the flexibility of multiple leg chain slings. The chain connector clamp is made of drop forged and heat treated alloy steel, and is available in the non-locking or small tonnage locking styles. Cat. Working Load Limit Grip Range Weight UPC 0248 Metric Ton in. mm lb kg GX Style 642900 7947 2 6-6 - 6 2 64290 794 6-4 - 9 9 4 Short Leg Structural GX Style 64280 7778 6-4 - 9 0 Two-Part Chain Slings And Mini-Slings are available as illustrated, but on special order only. Slings employ alloy master link, Quik-Alloy coupling link(s), Campbell Cam-Alloy chain and GX, or Short Leg Structural GX style clamp(s) listed above. Two-Part Sling Mini-Sling Model GX Rubber Pad (Non-Marring) Clamps Has a rubber covered pad and cam of relatively smooth metal conditioned to grip tightly Should be used for lifting smooth polished plates and/or hard plates over 4 Rockwell C/400 Brinnell Lifts heavy plates with minimum marring Clamps are 00% Proof Tested and Certificate of Test supplied with each clamp Cat. Grip Range Clamp Weight Working Load Limit UPC 0248 in. mm in. mm Metric Ton 642600 796 6-8 - 9 6 2 64260 792 6-8 - 6 22 0 Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 9

l i f t i n g c l a m p s Replacement Part Kits for GX Rubber Pad Clamps 606060 Shackle Kit Components Note: Shackle Kit is supplied pre-assembled (as shown above), to ensure proper assembly of linkage. 60606 RPC Cam / Pad Kit Components Capacity 2 TON TON Part Name Cat. UPC 02048 Cat. UPC 02048 Shackle Kit 60600 20280 606070 20266 Kit Includes: Shackle, Radius Link, T-Spring, 2 Connecting Links, Radius Link Pin, Linkage Rivets, 2 Sel-locs Clamps Cam / Pad Kit 60606 20297 60607 2027 Kit Includes: Cam, Rubber Pad, Cam Pin, Pad Pin, T-Spring, Rivet, 4 Sel-locs, Screws Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 96

l i f t i n g c l a m p s www.apexhandtools.com/campbell Locking E Clamps Clamp lifts from either horizontal or vertical position Clamps turn plates through 90 Locks open or closed with a lever Has large throat that gives a secure bite and wide grip range Note: Be sure clamp is in lock closed position before making lift Clamps are 00% Proof Tested and Certificate of Test supplied with each clamp Warning: NEVER tamper with a clamps tension arm or spring mechanism during a lift. Merrill Model Cat. Grip Range Clamp Weight Working Load Limit UPC 0248 in. mm in. mm Metric Ton E 642070 0962 0-4 0-2 20 9 E 6420702 09629 0-2 0-8 28 E 642070 0966 4-2 2 2-64 8E 642070 0960 2-2 2-64 8 7 8 8E 6420706 09667 2-4 - 02 84 8 8 Cat. UPC 0248 Dimensions A B C D E H J in. mm in. mm in. mm in. mm in. mm in. mm in. mm 642070 0962 7 4 84 4 8 6 9 4 2 2 89 2 2 4 8 6420702 09629 8 7 8 22 6 406 0 2 267 2 89 2 2 64 2 6 68 27 642070 0966 0 2 267 6 8 422 4 286 2 89 2 2 64 8 79 4 642070 0960 4 8 9 22 4 78 4 400 27 2 89 4 7 8 24 8 2 26 6420706 09667 6 406 2 84 6 4 4 27 2 89 6 29 8 4 222 Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 97

l i f t i n g c l a m p s Replacement Part Kits for Locking E Clamps 60700 Shackle Kit Components 6070 Cam / Pad Kit Components Capacity TON TON 8 TON 8 TON 2 TON Part Name Cat. All Grips All Grips 2-2 2 2-4 and 4-6 All Grips UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Cat. UPC 02048 Shackle Kit 60700 20440 60700 20464 607080 20488 607082 20426 607082 20426 Kit Includes: Shackle, Shackle Bolt, Nut, Cotter Pin Cam / Pad Kit 6070 2047 6070 2047 60708 2049 60708 2049 60708 2049 Kit Includes: Cam, Pad, Cam Bolt, Pad Bolt, 2 Nuts, 2 Rivets, Drive Pin, Spring, Chain Pull, Chain Pull Clip, Tension Arm, 2 Swivel Pins, 2 Cotter Pins Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 98

l i f t i n g c l a m p s www.apexhandtools.com/campbell SAC (Screw-Adjusted Cam) Plate Clamps Cam position under no load. Cam under load. The heavier the load, the greater the bite. Recommended for turning plates from horizontal to vertical as well as through a 80 arc The convex, serrated cam swivels on a ball joint so that the area of cam engagement increases as load increases Drop forged body and shackle Clamps are 00% Proof Tested and Certificate of Test supplied with each clamp Note: SCREW NEEDS TO BE HAND TIGHT ONLY! DO NOT OVERTIGHTEN. Merrill Model Cat. Grip Range Clamp Weight Working Load Limit UPC 0248 in. mm in. mm Metric Ton SAC- 642000 09696 0-0 - 2 6 4 SAC- 64200 096402 0-2 0-6 7 SAC-6 642002 09649 0-0 - 76 40 8 6 Cat. Dimensions A B C D E F H J O** P in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 642000 4 7 4 97 4 02 4 44 2 7 8 7 2 2 8 2 4 7 6 4 9 2 64 4. 64200 7 4 97 0 2 267 6 2 6 7 8 48 8 86 4 9 2 8 60 4 86 9 4 2 6 46 642002 0 24 4 4 62 8 4 20 4 8 4 2 4 8 29 76 4 2 76 2 0 2 4 7 ** At 0 grip. Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 99

l i f t i n g c l a m p s Replacement Parts for SAC Clamps Capacity Part Name Campbell SAC-, Ton Clamp with 0- Grip Cat. 642000 Cat. UPC 02048 Campbell SAC-, Ton Clamp with 0-2 Grip Cat. 64200 Cat. UPC 02048 Campbell SAC-6, 6 Ton Clamp with 0- Grip Cat. 642002 Cat. UPC 02048 Cam / Pad Kit 60000 202 6000 2029 60020 206 Kit Includes: Cam, Pad, Pad Bolt, Nut, Washer Screw w/handle Kit 600 2942 600 2904 6002 2928 Kit Includes: Screw, Handle Shackle w/bolt Kit 60 299 6002 29 60022 29 Kit Includes: Shackle, Bolt, Nut, Cotter Key 60000 Cam / Pad Kit Replacement Part for Multipurpose SAC Clamps Part Name Merrill Part Ton Cat. 64200 Cat. UPC 02048 Merrill Part Ton Cat. 64202 Cat. UPC 02048 Cam 28 60028 09876 8 6008 098642 Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 200

l i f t i n g c l a m p s www.apexhandtools.com/campbell Sharp Leg Clamps, GX Style Designed to lift plates from a stack from horizontal to vertical positions in a 90 arc (not 80 ) The long sharp leg can be driven between the top two plates to fully engage the clamp 00% proof tested with certificate of test attached to each clamp Replacement parts are same as for standard GX clamps Cat. Grip Range Clamp Weight Working Load Limit UPC 0248 in. mm in. mm Metric Ton 64200 74 6-8 - 6 2 2 6420 74 6-4 - 9 9 4 6420 78 6 - - 2 26 2 Duplex Hand Grip Designed to carry or pull any object that will fit into its jaws Grips and releases automatically Merrill Part Cat. UPC 02048 Working Load Limit Handle Length Grip Range Dimensions C J O Weight lb kg in. in. mm in. mm in. mm in. mm lb kg 64280 09669 00 227 2 0-6 0-8 6 2 7 8 48 4 9 2 642802 096709 00 227 Eye nut 0-6 0-8 8 20 7 8 48 4 9 2 64280 09676 00 227 6 0-6 0-8 2 0 7 8 48 4 9 64280 09672 00 227 0 0-6 0-8 6 406 7 8 48 4 9 642806 09670 00 227 8 0-6 0-8 2 84 7 8 48 4 9 4 2 Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 20

l i f t i n g c l a m p s Horizontal Plate Clamp Merrill Part Cat. UPC 02048 Working Load Limit Per Pair Grip Range Cam Width One man can handle plates with this clamp Dual springs hold cam on the work while the second clamp is placed Sold in pairs ONLY Clamps are 00% Proof Tested and Certificate of Test supplied with each clamp Dimensions Weight Per Pair A B C D O Metric Ton in. mm in. mm in. mm in. mm in. mm in. mm in. mm lb kg 6H 64270 096686 6 0-2 0-8 4 9 4 2 4 2 8 20 2 7 2 9 28.6 Replacement Parts for Horizontal Plate Clamp Part Name Cat. UPC 02048 Cam Kit 60700 204 Kit Includes: Cam, Cam Bolt, 2 Springs, Nut Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 202

l i f t i n g c l a m p s www.apexhandtools.com/campbell Drum Handling Equipment, Single Drum Lifter, 2 Lifts steel drums with or without heads removed Drums can be lifted from either horizontal or vertical positions and then reversed Snaps onto drum and is held there by its spring-loaded cam even when there is no load Note: THIS CLAMP IS NOT SUITABLE FOR LIFTING PLATES OR SHEETS Merrill Model Cat. UPC 02048 Working Load Limit Per Pair Overall Width Bearing to Pad Center Dimensions I.D. Eye Bead Recess Max. Jaw Opening Weight Metric Ton in. mm in. mm in. mm in. mm in. mm lb kg 2 6400 0964 2 27 6 2 4 44 2 x 4 x9 7 8 22 4 4 2 Replacement Parts for Drum Lifter, 2 Part Name Pkg. Qty. Merrill Part Cat. UPC 02048 Cam, Pad, Rivet and Spring ea K024 600 09982 Made to Order Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 20

l i f t i n g c l a m p s Chain Sling For Drums, Double sling assembly consisting of 9 2 alloy chain, two 2 drum lifters and CO- master link Chain legs connected by Quik-Alloy coupling links Merrill Model Working Load Limit at 60 Overall Length Complete Sling Alloy Chain Clamp Used Working Load Limit Cat. UPC Weight Merrill Cat. UPC 02048 Metric Ton in. mm in. mm lb kg Clamp 02048 ton kg 6400 0966 27 686 9 2 7 6 2 6400 0964 2 44 Twin Drum Lifter, 22 Handles both regular and resealable steel drums without damaging bead A recess on short leg of the clamps accommodates the bead of resealable drums Unopened drum Top removed Clamps Merrill Model Cat. UPC Working Load Limit Grip Range Overall Length Height Bearing Point to Grip 02048 Metric Ton in. mm in. mm in. mm lb kg 22 64040 09672 7 2-2 44-6 28 7 2 0 22 4 0 NOTE: Available replacement parts listed on previous page. Weight Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 204

l i f t i n g c l a m p s www.apexhandtools.com/campbell Drum Deheader, 8 All parts are drop forged and heat treated Cuts the heads out of steel drums without leaving dangerous edges Blade and fulcrum are detachable For initial cut, the tool has a point in the rear and a striking surface in front Available with either alloy blade or non-sparking blade Drum Deheader Operating Instructions: ) Open handles, place blade on top of steel drum so that pivot is on outside, below lip of drum, close handles. 2) Pry down so point of blade pierces lid. If needed, while prying down, strike back of blade with hammer. ) Lift handle slightly, slide deheader forward, pry downwards to cut lid further. Merrill Cat. UPC Length of Tool Weight Model 02048 Description in. mm lb kg 8 64070 0979 Deheader with alloy blade 24 60 2 2 9 640702 09726 Deheader with non-sparking blade 24 60 2 2 Replacement Parts for Drum Deheader, 8 Part Name Merrill Part Cat. UPC 02048 Weight lb Alloy Blade 40 60040 0982 2 Non-sparking blade 4 6004 0980 2 Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 20

l i f t i n g c l a m p s Fork Truck Drum Lifter, 260 Transforms any fork lift truck into an efficient drum handler Handles steel drums with or without heads With shackle reversed in body, a chain sling can be attached to lift many objects besides drums Merrill Model Cat. UPC 02048 Min. Space Between Forks Max. Outside Forks Dimensions Working Load Limit Fork, Max Using Using Center Thickness Width Dia. Drum Clamps Shackles Weight in. mm in. mm in. mm in. mm in. lb Metric Ton Metric Ton lb kg 260 6400 09696 2 40 8 47 4 44 6 4 9 7 2-2 44-6 29 Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 206

lli fi ft ti ni ng g ccl la a mp ps s i n d e x www.apexhandtools.com/campbell Cat. Page Cat. Page Cat. Page Cat. Page 6400... 20, 204 60600...94 6400...204 6060...94 64040...204 606060...96 6400...206 60606...96 64070...20 606070...96 640702...20 60607...96 642070...97 606200...9 6420702...97 60620...9 642070...97 60620...9 642070...97 6062...9 6420706...97 606220...9 642000...99 60622...9 64200...99 60700...98 642002...99 6070...98 64270...202 60700...98 64280...20 6070...98 642802...20 607080...98 64280...20 60708...98 64280...20 607082...98 642806...20 642200...90 6422002...90 642202...90 642000...92 64200...92 64200...92 6420...92 64200...9 6420...9 64208...9 6420...9 64200...20 6420...20 6420...20 642600...9 64260...9 64280...9 642900...9 64290...9 642920...92 64292...92 64292...92 60040...20 6004...20 60028...200 6008...200 60000...200 6000...200 600...200 6002...200 60020...200 6002...200 60022...200 600...200 60...200 60700...202 600...20 606000...94 60600...94 60600...94 6060...94 606020...94 Seleccione el tamaño de mordaza adecuado para el trabajo. 60602...94 Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. 60600...94 El espesor de la placa debe estar dentro de la gama de agarre mostrada 6060...94 en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. Clamps 207

l i f t i n g c l a m p s Clamps Seleccione el tamaño de mordaza adecuado para el trabajo. Determine el peso de la placa a ser alzada. No exceda el limite de carga de trabajo (WLL) mostrado en la mordaza. El espesor de la placa debe estar dentro de la gama de agarre mostrada en la mordaza. Select proper size clamp for the job. Determine the weight of the plate to be lifted. Do not exceed WLL (Working Load Limit) shown on clamp. Plate thickness must be within grip range shown on clamp. 208

Apex Tool Group World Headquarters 4600 York Road, Suite A Sparks, MD 22 Tel: 99-87-0099 Fax: 99-87-264 Customer Service U.S. T E L E P H O N E : North...866 907 9706 South...866 907 9706 Midwest...866 907 976 West/SW...866 907 976 Hardware... 99-62-670 F A X : North... 800-84-7 South... 800-84-9 Midwest... 800-84-8 West/SW... 800-46-72 Hardware... 877-87-04 Export... 99-87-2402 Customer Service Canada Phone... 70-728-888 Fax... 800-40-866 4600 York Road, Suite A Sparks, MD 22 www.apextoolgroup.com CHT0-047/MW-00000/00M/Printed 06//USA Apex T082 20, Apex Tool Group, LLC Specifications subject to change without notice.