rchitectural hardware products
i
Table of ontents page Terms and onditions... iii-vi Index by Product escription... vii Index by Part Number... viii inish hart... ix Packaging, Handing... xi - Hinges and Pivots rchitectural Hinges.... 2-11 Residential Hinges.... 12 ontinuous Hinges............................................... 13-30 Pivots.... 31-49 Pocket Pivot/Hinges....50 - Pulls and Push Plates Pull................................................................ 2-8 Push ars... 8-9 Vandal Resistant Trim.... 10-12 Protection Plates.... 13-14 Mounting etail.... 15-17 - lush olts.... 2-11 oordinators... 12-16 - Surface olts.... 2-6 oor uards.... 7 Roller Latches.... 8-10 ngle.... 11 Latches/atches... 12-16 - loor.... 2-5 & Holders....6-8 Wall umpers/.... 9-14 Wall Holders...15 Kick own Holders... 16-17 Plunger oor Holders.... 17 Roller umpers....19 Residential oor... 20-21 Hinge Pin... 21-22 Silencers... 23 - xterior Hardware Lock uards.... 2-4 oor Viewers.... 5-6 oor Knockers....7 Letter ox/plates... 8 oor Numbers.... 9 Storm oor Latch... 9 Screen oor Pull.... 10 rash... 10 - Hooks & rackets....2-6 Window Hardware.... 6-8 Hobby Hardware... 9-12 abinet/loset Hardware.... 13-16 xterior Hardware ii
Terms and onditions xterior Hardware iii 1. NRL/PTN. (a) This greement contains the only terms and conditions by which ompany will quote and sell eliverables to ustomer; (b) The terms purchase order or order for the purposes of this greement include the term request for quotation, as appropriate; (c) This greement supersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued by ustomer; (d) No reference herein to ustomer s purchase order will in any way incorporate different or additional terms and conditions, all of which ompany hereby expressly objects to; (e) NY PTN Y OMPNY O USTOMR S PURHS ORR IS XPRSSLY ONITION ON TH USTOMR S SSNT TO N PTN O TH TRMS N ONITIONS ONTIN IN THIS RMNT; (f) ompany reserves the right to decline any order, in whole or in part, for any reason. 2. ORRS. a. Order Processing. When ustomer wishes to place an order for eliverables, it will deliver to ompany a purchase order. ll such purchase orders must (i) be in a written format acceptable to ompany, (ii) be legible, (iii) include a purchase order number, (iv) include ustomer s account number, invoice address, ship to address, shipping method, shipper s letter of instruction for international shipments, part number, pricing, and designated contact information, (v) include, if applicable, any special configuration I numbers, necessary programming information, special factory instructions, and requested specifications regarding a particular finish, handing, design, backset, or strike, and (vi) reference any applicable pricing discounts under an ongoing buying program or based on a written quote from ompany, along with the applicable buying program number or quotation number. b. Minimum Orders. In the event the order value does not meet any required minimum net eliverable value, ompany may, at its sole discretion, (i) increase the quantity of items in the order to meet the minimum net eliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiver of the requirement for any future orders. c. cceptance of Purchase Orders. ompany will endeavor to (i) acknowledge receipt of each purchase order issued in accordance with this greement, and (ii) notify ustomer whether ompany accepts or rejects the purchase order. If ompany fails to accept or reject a purchase order within a reasonable time period, such failure to respond will be deemed a rejection of the entire order. d. hanges to Order/ ancellation of Orders. dditional terms and conditions regarding order changes and cancellations are available on the llegion customer website, WHIH TRMS R XPRSSLY INORPORT HRIN Y RRN. Unless otherwise provided herein, ustomer acknowledges that (i) requesting a hange Order may cause a delay in the scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after 48 hours of ompany s order acknowledgment; (iii) fter 48 hours of ompany s order acknowledgment, all changes to an accepted purchase order will be subject to a hange Order charge of 25% of the net eliverable value, plus the cost of labor and fabrication or raw material that ompany incurred prior to the receipt of the hange Order from ustomer, or that may be required due to the hange Order; (iv) the requested change may result in additional charges for labor, fabrication, and raw material, and (v) if ustomer cancels an order or portion of an order that includes eliverables that have been manufactured and prepped for shipping, a 35% restocking fee will apply. Notwithstanding the foregoing, ustomer cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, ustom or nonstandard items once they have been placed. ll cancelled orders for a Non Recurring xpense (NR), credential orders, reader orders, biometrics orders, and/or ustom orders will be subject to a cancellation charge of 100% of the acknowledged price. e. dd-ons. dd-on orders will not be accepted. dditions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis. f. ast-track Orders. No changes or cancellations will be accepted on the 24-Hour ast Track Program. or 3-day ast Track orders, changes and cancellations may only be requested by ustomer within 24 hours of ompany s order acknowledgment if the order has not shipped. or 5-ay ast Track orders, changes and cancellations may only be requested by ustomer if the order has not shipped and if the request is made to ompany within 48 hours of ompany s order acknowledgment. Return Material uthorization (RM) for eliverables must be processed through ast Track ustomer Service. g. Steelcraft Orders. or all Steelcraft orders, changes or cancellations are allowed without penalty only if made within 48 hours of ompany s order acknowledgment, and provided that the order has not shipped. Some exceptions do apply please consult the factory. hanges are not allowed on Rapid Program orders after the order has been entered and acknowledged. fter 48 hours of ompany s order acknowledgment, all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specified by ompany in writing, any changes to orders acknowledged by ompany that affect the delivery date will be deemed a new order and will require acknowledgement by ompany as provided in this Section. dditional products, features, terms and conditions regarding the Rapid Program are available on the llegion, WHIH TRMS R XPRSSLY INORPORT HRIN Y RRN. 3. PRIS, INVOIS N PYMNT. a. Prices. The prices in ompany s Price ook are subject to change at any time, without notice to ustomer. ompany may charge ustomer additional amounts if ustomer requests special packing, marking, shipment, product modification, or engineering services. Oral prices specified by ompany are null and void. Quote numbers must be referenced on ustomer s purchase order in order for the ompany s quoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing or book net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject to the Price ook in effect at the time the quote was issued by ompany. b. Taxes. Prices do not include any present or future federal, state or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. ny taxes, charges, or duties imposed by any governmental authority on the sale of eliverables will be paid by ustomer, in addition to the selling price specified by ompany. c. Payment Terms. ompany will deliver to ustomer an invoice with each shipment of eliverables hereunder. ustomer will pay all invoiced amounts within 35 days of the invoice date, provided that ustomer may take a 2% discount if ustomer pays in cash and ompany receives said payment within 20 days of the invoice date. or the avoidance of doubt, cash discounts do not apply to credit card payments. ustomer will make all payments in United States dollars. Past due invoices will be subject to a late payment service charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is less. ustomer shall reimburse ompany for all costs of collection, including, without limitation, reasonable attorneys fees, for any overdue amount owed by ustomer to ompany, and such collection costs shall also be subject to interest charges. 4. QUOTTIONS. a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted for the quantities, finishes, and series of eliverables referenced on the quote. ompany reserves the right to require proof of sale of ompany products for any quoted project. b. Stock Quotations. eliverables fulfilling stock quotations may only be used for the following: i) Stocking of the ustomer s shelves for small, quick-turn, discretionary projects, or ii) Sale to a general contractor or installer for new construction. Stock quotations may not be used for any project containing any ompany no-substitution, specified products. eliverables purchased under Stock Quotations cannot be redistributed to other ustomer branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade. c. eneral. ll quotes are subject to this greement, unless otherwise specified by ompany, and are subject to change at any time prior to ompany s acceptance of a purchase order referencing the applicable quote number. ompany, its representatives and employees reserve the right, in their sole discretion and for any reason, to refuse a ustomer s request to quote a price other than the standard list price, regardless of whether ompany or its representatives or employees have previously quoted discounted prices to the ustomer on some or all of its orders. ustomer s failure to comply with this Section 4 will be considered a material breach of this greement, and will entitle ompany to immediately terminate any purchase orders and/or ustomer s ability to distribute ompany s products. 5. SURITY INTRST. ustomer grants ompany, and ompany retains, a purchase money security interest and lien on any and all of ustomer s rights, title and interest in each eliverable sold by ompany to ustomer, wherever located, until the invoice for the applicable eliverable(s) is paid in full, including any late charges and costs of collection. ustomer authorizes ompany to, and will assist ompany in, taking all necessary steps to perfect and maintain ompany s interest in such eliverables. 6. RIT TRMS. Unless ustomer pre-pays all of its purchase orders in advance, its purchase orders will be subject to the credit limit and other terms of credit ( redit Terms ) set forth in ompany s credit application, which redit Terms ustomer acknowledges are subject to change by ompany at any time. ompany reserves the right to request payment in advance of shipment or any order or to request adequate assurances for ustomer s payment of an order and may withhold or stop shipment, without any liability to ompany, until ustomer submits payment or adequate assurance of payment. 7. RSL O LIVRLS. ustomer agrees and warrants that it will offer ompany products in support of ompany-written specifications and will maintain sufficient inventory to adequately support nd Users, installers, and/or general contractors needs. ustomer will adhere to any MSRP or resale pricing programs of ompany. ailure to comply with this provision will be considered a material breach of this greement, and will entitle ompany to immediately terminate any purchase order and/or ustomer s ability to distribute ompany s products. ustomer shall, at its own expense, gain and maintain sufficient knowledge of the industry and products competitive with eliverables so as to be able to (a) explain in detail to nd Users, installers, and/or general contractors the differences between the eliverables and competing products, (b) ensure that an adequate number of trained, capable and qualified technical personnel with sufficient knowledge of the eliverables and who have obtained all necessary licenses and permits are available to assist nd Users, installers, and/or general contractors, and (c) respond to such nd Users, installers, and/or general contractors with respect to the general operation and use of the eliverables including, but not limited to, (1) acting as a liaison between the nd Users, installers and/or general contractors and ompany in matters requiring ompany participation, (2) providing general product information and configuration support on standard protocols and features, (3) collecting relevant technical problem identification information, and (4) posting and distributing any warranty information concerning the Products in accordance with ompany s instructions. ustomer is responsible for all service and support resulting from the re-sale of any eliverable to nd-users, installers and/or general contractors, examples of which may include, but are not limited to, support activities such as installation, initialization, software set-up, training, trouble-shooting, technical support and field service. In the event ustomer is unwilling or unable to perform said support activities, ompany reserves the right to recover from ustomer any and all expenses incurred by ompany to resolve the afore-mentioned nd-user, installer and/or general contractor issues. Technical product training is recommended for ustomer in order to fully service and support eliverables purchased from ompany that are resold to nd-users, installers and/or general contractors. 8. ULT. If ustomer is in default of payment or otherwise with respect to any purchase order or other contract with ompany, ompany shall have the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer further shipments under that or any other purchase order until such default is corrected and to declare all outstanding bills of ustomer to be immediately due and payable. 9. INSPTION N LIVRY. a. Inspection. ustomer will inspect all eliverables immediately after receiving them. ustomer will be deemed to have accepted the eliverables unless ustomer notifies ompany in writing of any nonconformance within 10 days of delivery and provides ompany written evidence reasonably documenting that nonconformance. Inspection of eliverables at ompany s facility is not permitted. b. elivery. elivery schedules for eliverables are based upon current production capacities, material or component availability, and inventory, and may be changed by ompany as conditions require. elivery schedules for services are based upon ompany s prompt receipt of, and prompt access to, ustomer s equipment and all information necessary to complete the services. In no event will any delivery date be construed as falling within the meaning of time is of the essence. Partial delivery shall be accepted by ustomer and paid for at the price and on the terms stated herein. ny partial delivery shall constitute a separate sale, and payment shall be separately made when due. If any part of a delivery hereunder is not delivered by ompany in accordance with ustomer s purchase order, this greement shall not be affected thereby. 10. TITL & RISK O LOSS. Unless otherwise specified by ompany, (i) where the ustomer is located in the United States, all eliverables will be sold Uniform ommercial ode, O Origin, ompany s factory ; and (ii) where the ustomer is located outside of the United States, all Products will be sold x-works, ompany s factory (Incoterms 2010). In either instance, title and risk of loss will pass to ustomer upon delivery to the carrier at ompany s
Terms and onditions factory, provided, however, as set forth herein, ompany shall retain a security interest in the eliverables until full payment has been made therefore, and ustomer agrees, upon request, to do all things and acts necessary to protect ompany s interest by adequately insuring the eliverables against loss or damage from any cause and to have ompany named as an additional insured. ustomer will promptly provide ompany with a copy of the relevant certificate of insurance upon ompany s request. 11. SHIPPIN & SHIPPIN PRORMS. a. reight harges. ompany will ship all eliverables in accordance with ompany s freight shipment guidelines, which are set forth on the llegion customer website ( reight Shipping uidelines ), WHIH TRMS R XPRSSLY INORPORT HRIN. b. Rush harges. xpedited order options are available as set forth in ompany s freight shipping guidelines. c. Packing and Marking. ompany will pack, mark, and ship eliverables according to its standard procedures for shipment, unless the parties agree, in writing, that ompany will comply with any special instructions provided by ustomer. Special instructions may result in an increased price. d. International Shipments. or all international orders, a Shipper s letter of instruction must be submitted in writing with the order. ailure to do so will result in the order being rejected. omplete adherence to this order requirement will be strictly enforced. ompany will not be held liable for any charges resulting from delays due to lack of complete required information being supplied. e. Once received by the ompany, a purchase order cannot be combined with any other order to qualify for freight allowances. In addition, ustomer may not combine any ompany brands or product categories on a single order to meet the applicable net freight allowance, except in the case of: i) asttrack 24 Hour/5 ay Program, which is available for Schlage, Von uprin, LN and lynn-johnson products; ii) asttrack 24 Hour/3 ay Program, which is available for alcon Locks, xits and losers and Ives products. When an order includes products from the brands listed in both (i) and (ii) above, the order will automatically default to the asttrack 24 Hour/5 ay Program lead times and freight allowance. 12. LIMS. ll claims must be submitted in writing to ompany as follows: (i) ll claims for prices must be submitted within thirty (30) days from the date of invoice; (ii) ll claims regarding eliverable quantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) ll claims for damage to eliverables (while in the care, custody, and control of ompany) must be submitted within thirty (30) days from the date of invoice; (iv) ll claims for loss or damage to eliverables while in the care, custody, and/or control of a carrier will be the responsibility of ustomer, unless otherwise agreed by the parties. 13. PROUT HNS. ompany s product policy is one of ongoing update and revision, and accordingly, ompany reserves the right to change, without notice, the design of, or the process of manufacturing, the eliverables covered by this greement. 14. PROUT US LIMITTION. ustomer agrees: (i) not to sell or use a eliverable in any manner contrary to the manner in which the eliverable is intended to be used; and/or (ii) not to modify the design of any eliverable for use with another product without the prior written consent of ompany. 15. PROUT RTURNS. Unless otherwise agreed by the parties in writing, eliverables that are correctly furnished by ompany per the purchase order may not be returned unless ustomer receives written authorization from ompany. If returns are authorized by ompany, a return merchandise authorization ( RM ) number must be provided by ompany. eliverables identified under such RM must be returned to ompany within 90 days of issuance of the RM. Such RM number and any accompanying RM documents, the original invoice number, and a written explanation for the return must be included with the returned eliverables in order for ompany to inspect and approve a credit for the return. or warranty returns, a credit in the amount of the original purchase price will only be issued if, after ompany s receipt and inspection of the returned eliverables, ompany confirms, in its sole discretion, the defect is valid and approves the return. or non-warranty returns, (a) in the event ompany approves such a return, a credit will be made to ustomer s account in the amount of the original purchase price less freight and a handling charge of 35% of the net material on the original invoice; and (b) Only eliverables that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their original condition as at the time of sale by ompany to ustomer, in their original packaging and in ustomer s inventory less than 180 days from the date of shipment by the ompany may be considered by ompany for return. Such credit will only be issued if, after ompany s receipt and inspection of eliverables, ompany approves the return. The amount of final credit will be determined upon receipt at the factory and following ompany s inspection and analysis of the condition of the returned material. ompany retains the right to deny credit to anyone for any reason. 16. ONINTIL INORMTION. a. Non-Use nd Non-isclosure. ustomer shall not use the onfidential Information of the ompany except for the purpose of performing its obligations under this greement or exercising the rights granted herein (the Purpose ). ustomer shall protect onfidential Information of the ompany from disclosure and unauthorized use in the same manner that it protects its own onfidential Information, but in no event shall such standard of care be less than reasonable care. ustomer may disclose onfidential Information of the ompany only to its employees who require such information for the Purpose and who are subject to confidentiality obligations at least as protective as those set forth herein. b. Proprietary Information and dvice. (a) ll designs, data, and specifications provided by ompany are proprietary and may not be disclosed or reused by ustomer without the prior written consent of ompany; (b) ompany assumes no obligation or liability for any advice given by ompany, the results obtained, or damages incurred as a result of such advice, and all such advice is given and accepted at ustomer s risk. c. Return. Upon the termination or expiration of a purchase order or this greement or upon the request of the ompany, the ustomer agrees to end all further use of, to immediately return to the ompany the original version of, and to delete or destroy all copies of, any and all onfidential Information of the ompany. 17. TRMRKS. xcept as agreed to by ompany in writing, ustomer agrees not to (a) use ompany s name in any form of publicity; or (b) use, create, register or market, directly or indirectly, in whole or in part, ompany s names, logos, brands, or any other trademarks, or names that are now or may hereafter be owned by ompany, as part of ustomer s corporate or business name, as part of an internet domain name, uniform resource locator (URL), or in any way connected with ustomer s business, trade address or other designations. Upon termination of this greement or upon the request of company for any reason, any use of ompany s trademarks or names will be immediately discontinued. 18. LIMIT WRRNTY. OMPNY MKS NO OTHR WRRNTIS XPT THOS STT IN OMPNY S LIMIT WRRNTY IN T ON TH T OMPNY PTS H PPLIL PURHS ORR ( LIMIT WRRNTY ). TH LIMIT WRRNTY MY OUN IN TH PPLIL PRI OOK N ON TH LLION USTOMR WSIT, WHIH TRMS R XPRSSLY INORPORT HRIN Y RRN. OMPNY WILL MIL USTOMR HR OPY O THIS WRRNTY UPON USTOMR S WRITTN RQUST. IN TH VNT THT RTIN LIVRL WRRNTIS R NOT URNISH Y TH OMPNY TO USTOMR, OMPNY WRRNTS ONLY TO USTOMR THT TH LIVRLS WILL R ROM TS IN MTRIL N WORKMNSHIP OR PRIO O 12 MONTHS ROM TH T O SHIPMNT O TH LIVRLS. OMPNY S SOL OLITION UNR THIS WRRNTY IS LIMIT TO RPIRIN OR RPLIN, T OMPNY S OPTION, TH TIV LIVRL, PROVI WRITTN NOTI O TH T OR NONONORMN IS PROVI Y USTOMR WITHIN 30 YS O ISOVRY O TH T OR NONONORMN. OMPNY ISLIMS LL OTHR WRRNTIS, XPRSS OR IMPLI, WITH RSPT TO TH LIVRLS, INLUIN UT NOT LIMIT TO, NY IMPLI WRRNTIS O NON-INRINMNT, MRHNTILITY, OR ITNSS OR PRTIULR PURPOS. a. xclusions. The provisions of this Limited Warranty do not apply to eliverables that: () are not the proper size for the application; () are not installed in accordance with ompany s published installation instructions; () are installed with improper or incorrect parts and/or are used for purposes for which they are not designed or intended; () have been repaired or altered without the ompany s prior written consent; () have been subjected to misuse, abuse, negligence or accident; () have been improperly stored, installed, maintained or operated; () have been used in violation of written instructions provided by ompany to ustomer; (H) have been subjected to improper temperature, humidity, or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited Warranty do not apply to any defects or issues with the design or performance of equipment or products not manufactured by ompany, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection or construction of any goods. ompany is not responsible for loss or damage resulting from use of eliverables in conjunction with parts or systems not manufactured by ompany. ccessories or products furnished by the ompany, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the ompany and which can be passed to ustomer. b. Services. ompany warrants that its services will be free from defects in material and workmanship for a period of 12 months from the date of completion of the particular items of service. ompany s sole obligation under this service warranty is limited to repair or reperformance, at its option of the service, provided however, if repair or reperformance is either impractical or impossible, the ompany will refund to ustomer that portion of the price paid to ompany for any defective service, provided written notice of the defect or nonconformance is provided by ustomer within 30 days of discovery of the nonconformance. c. Notification. ustomer agrees to immediately notify ompany in writing if any claim is made against ustomer for any damages caused by any modules, parts, products, service or other eliverables which may be the direct result of any defect in the manufacture of such aforementioned products. ustomer agrees to cooperate with ompany and its counsel in the defense of such claim and ustomer agrees not to settle such claim without ompany s written consent. If ustomer fails to notify ompany of such claim or fails to cooperate in such defense as aforesaid, then ompany shall be discharged from any obligations under this Section and shall have no further liability to ustomer. d. xceptions. The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of eliverables or other manufacturer s products; (ii) shipping and freight expenses required to return eliverables to ompany; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in ompany s material (products only) or workmanship. 19. LIMITTION O RMIS. USTOMR S XLUSIV N SOL RMY ON OUNT O, OR IN RSPT O, TH URNISHIN O NON-ONORMIN LIVRLS, SHLL TO () SUR RPIR OR RPLMNT O TH PROUTS; OR () SUR RPIR OR R-PRORMN O TH SRVIS OR TO OTIN RUN O TH PRI PI OR TH TIV SRVI, LL T OMPNY S OPTION. IN NO VNT WILL TH OMPNY S MXIMUM LIILITY X TH SLLIN PRI OR TH LIVRL. TH WRRNTY, OLITIONS N LIILITIS O OMPNY (INLUIN ITS SUPPLIRS) N TH RIHTS N RMIS O USTOMR R XLUSIV N R IN LIU O N USTOMR HRY WIVS N RLSS LL OTHR WRRNTIS, OLITIONS, RPRSNTTIONS OR LIILITIS XPRSS OR IMPLI RISIN Y LW, IN ONTRT, TORT (INLUIN NLIN OR STRIT LIILITY) OR OTHRWIS, INLUIN UT NOT LIMIT TO (I) NY IMPLI WRRNTY O MRHNTILITY OR ITNSS OR PRTIULR PURPOS OR NY WRRNTY IMPLI THROUH OURS O PRORMN, OURS O LIN, OR US O TR OR (II) LIMS RISIN OUT O TH NLIN O OMPNY OR OMPNY S SUPPLIRS OR (III) NY OTHR LIM RISIN OUT O, ONNT WITH, OR RSULTIN ROM TH PRORMN O OMPNY OR ROM TH SIN, MNUTUR, SL, RPIR, LS OR US O TH LIVRL, OR NY OMPONNT THRO, LIVR OR RNR HRUNR OR OTHRWIS. 20. INMNIITION N LIMITTION O LIILITY. a. ustomer shall indemnify, defend and hold ompany, and its officers, directors, employees, customers, ffiliates, suppliers, users and agents, (collectively the Indemnitees ) harmless from and against any and all damages, claims, losses, expenses, costs, obligations, liabilities, including without limiting the generality of the foregoing, liabilities for court costs and attorneys fees, suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively, amages ), received or sustained by any person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of any representation or warranty made by ustomer, its officers, directors, employees, affiliates, users, agents, representatives or customers to ompany or any third party, (ii) any failure by ustomer to perform or fulfill any of its covenants, acts and/or omissions to ompany or to any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the obligations of ustomer and/or the eliverables sold by ompany to ustomer hereunder. ustomer shall not consummate any settlement of any indemnified claim without the Indemnitees prior written consent. ustomer s obligation to iv xterior Hardware
Terms and onditions xterior Hardware v indemnify Indemnitees will continue in full force and effect notwithstanding the termination or expiration of any order under this greement. In any claim against an Indemnitee by an employee of ustomer or any subcontractor or anyone directly or indirectly employed by any of them or anyone for whose acts they may be liable, the indemnification obligations set forth in this Section shall not be limited in any way by or for ustomer or any subcontractor under any applicable worker s compensation act, disability or other employee benefit act. This provision shall survive termination of any order or greement. IN NO VNT WILL OMPNY, ITS OIRS, IRTORS, MPLOYS, USTOMRS, ILITS, USRS N NTS, (NOR OMPNY S SUPPLIRS) LIL OR NY ININTL, ONSQUNTIL, INIRT, SPIL, OR PUNITIV MS O NY KIN OR NTUR UNR NY IRUMSTNS INLUIN, UT NOT LIMIT TO, LOSS O US O TH PROUTS, SRVI INTRRUPTION, LOSS O PROITS, LOSS O RVNU, LOSS O INTRST, LOST OOWILL, LOSS O T, WORK STOPP, IMPIRMNT O OTHR OOS, LOSS Y RSON O SHUTOWN OR NON-OPRTION, INRS XPNSS O OPRTION, OR LIMS O USTOMR S USTOMRS, OR NY OTHR LOSSS OR MS RISIN OUT O NY LK OR LOSS O US O TH LIVRLS WHTHR S ON ONTRT, WRRNTY, TORT (INLUIN, UT NOT LIMIT TO, STRIT LIILITY OR NLIN), PTNT INRINMNT, OR OTHRWIS, VN I VIS O TH POSSIILITY O SUH MS. b) INTLLTUL PROPRTY INMNITY. ompany makes no representation or warranty to the ustomer that the eliverables shall not infringe any intellectual property rights including, without limitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual property infringement. ustomer agrees to hold ompany harmless from and defend the ompany against any such claim of intellectual property infringement, including any amages resulting from that claim, the cost of complying with any preliminary or permanent injunction, and all other costs of defense (including the attorneys fees and costs), in connection with the foregoing. c) To the extent that applicable law does not permit any limitations set out in this greement, such limitation shall not be applied or invoked. Nothing in this greement will be interpreted to disclaim liability of ompany or the Indemnitees for gross negligence or willful misconduct. The limitations of remedy and liability herein shall not be interpreted to affect ompany s obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this greement. urther, the limitations of remedy and liability herein shall not be interpreted to limit ompany s or ustomer s right, if permitted by applicable law, to assert a claim for contribution among joint tortfeasors in connection with a claim by a person who is not a party to this greement. 21. RTIITIONS. ertification of eliverables for compliance with UL and NSI standards are tested and performed by third-party independent laboratories. ny field modification or alteration of certified eliverables will void certification and ompany is not liable to ustomer to certify any modified or altered eliverable. 22. TRM OR LIMS. NO TION RISIN OUT O NY LIM RH O THIS RMNT Y OMPNY MY ROUHT Y USTOMR MOR THN ON (1) YR TR TH US O TION HS RISN. 23. ONSUMR PROUTS WITH RSPT TO ONSUMR PROUTS S IN UNR TH MNUSON- MOSS WRRNTY T ( MMW ), TH OLLOWIN STTMNTS R M. () SOM STTS OR LOL LWS O NOT LLOW LIMITTIONS ON HOW LON N IMPLI WRRNTY LSTS, SO TH OV LIMITTION MY NOT PPLY TO YOU; () I NY IMPLI WRRNTY IS PROVI UNR TH MMW, IT IS LIMIT TO TH URTION O TH WRRNTY PROVI IN STION 18 OV. () SOM STTS OR LOL LWS O NOT LLOW TH XLUSION OR LIMITTION O ININTL OR ONSQUNTIL MS, SO TH OV LIMITTION OR XLUSION MY NOT PPLY TO YOU; N () THIS WRRNTY IVS YOU SPII LL RIHTS N YOU MY LSO HV OTHR RIHTS WHIH VRY ROM STT TO STT OR LOTION TO LOTION. 24. OR MJUR/XUSL LY. ny delay or failure of ompany to perform its obligations hereunder will be excused to the extent that it is caused by an event or occurrence beyond ompany s control such as, by way of example and not by way of limitation, acts of od, acts by any governmental authority (whether valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and slowdowns) at ompany s facility, its source plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery date will be extended for a time equal to that of the delay and the schedule for ompany s performance will be deemed adjusted to that effect. 25. NTIR RMNT N MNMNT. This greement, together with the attachments, exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entire agreement between ompany and ustomer with respect to the matters contained herein and supersede all previous communications, representations, or agreements, either oral or written between ompany and ustomer. No agreement or understanding varying or expanding this greement will be binding upon either party unless it is in writing and signed by a duly authorized representative of each party hereto. 26. ONLITS. In the event of any conflict or inconsistency between the terms of any agreement, or any part of an agreement or the various documents (including, but not limited to, electronic documents) between ompany and ustomer, unless the parties agree otherwise in writing, the various components of the agreements shall be given the following precedence (in descending order of precedence): a) any master agreement or long term agreement between ompany and ustomer; b) any specific terms, conditions and/ or warranties of the individual products or eliverables; c) the terms and conditions of this greement, and d) any purchase order. 27. UNSTISTORY RIT/TRMINTION OR INSOLVNY OR ULT. ustomer shall furnish ompany with statements evidencing ustomer s financial condition as ompany may, from time to time, reasonably request, and shall notify ompany immediately of any and all events that may have a material adverse effect on ustomer s business or financial condition. If ompany determines, in its sole discretion, that ustomer s financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to ompany s other rights, ompany may without liability or penalty, take any of the following actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment of eliverables to ustomer; or (iv) any combination of the above. ompany may immediately terminate an order from ustomer by giving written notice to ustomer in the event of the happening of any of the following or any other comparable event: (i) insolvency of the ustomer; (ii) filing of a petition in bankruptcy by or against the ustomer; (iii) appointment of a receiver or trustee for the ustomer; (iv) execution of an assignment for the benefit of creditors by the ustomer, all of which will allow ompany to demand reclamation of all affected orders; (v) ustomer ceases or threatens to cease to trade; (vi) ompany determines that ustomer does not meet or no longer meets the credit requirements of ompany or ustomer s credit account is closed; (vii) any ustomer violation of law, specifically including, without limitation, those laws set forth in this greement. In the event of termination in accordance with this section, ompany will not be obligated to accept any existing or additional orders from ustomer and ompany will be released from its obligation to deliver under orders accepted prior to such termination. The rejection or termination of any order by ompany will not entitle ustomer to any termination or severance compensation, or to any payment in respect to any goodwill established by ustomer, or render ompany liable for damages on account of the loss of prospective profits, or on account of any loss, expenditure, investment or obligation incurred or made by ustomer. No action taken under this Section 27 by ompany (nor any failure of ompany to act under this Section 27) will constitute a waiver by ompany of any of its rights to enforce ustomer s obligations, including the obligation of ustomer to make payments as required under this greement. Upon termination of any order, all amounts owed by ustomer to ompany will become immediately due and payable, whether or not otherwise then due or payable. 28. RIT RISK ON RSL O LIVRLS. ustomer is responsible for all credit risks with respect to, and for collecting payment for, all eliverables sold to third parties (including nd Users, installers, and/or general contractors) whether or not ustomer has made full payment to ompany for such eliverables. The inability of ustomer to collect payment for any eliverable shall not affect ustomer s obligation to pay ompany for any eliverable. 29. OVRNIN LW; VNU; N XPNSS. ny dispute or claim relating to this greement shall be governed by and construed according to the laws of the State of Indiana (excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations onvention on the International Sale of oods. ny disputes or claims shall be instituted and maintained in the courts of the State of Indiana. ustomer consents to the exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any action arising from or relating to this greement. ustomer agrees to pay for all expenses (including, but not limited to, collection costs, court costs and attorneys fees) incurred by ompany in enforcing the obligations of ustomer under this greement. 30. RLTIONSHIP O TH PRTIS. Nothing in this greement or any other document creates an employment, partnership, joint venture, or agency relationship between ompany and ustomer, including that of franchisee/franchisor. No party will have any power or authority to enter into any commitment on behalf of or otherwise bind the any other party on any matter. No employee of ustomer will be deemed to be an employee of ompany. If any provision of this greement is deemed to create a franchise relationship or business opportunity between the Parties, then ompany may terminate any purchase order or this greement or the Parties shall negotiate in good faith to modify this greement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby are consummated as a reseller agreement and not a franchise or business opportunity agreement. 31. STO. ustomer does not have the right to setoff or to back charge against any amounts which become payable to ompany under this greement or otherwise. ompany will not accept responsibility for backcharges for the cost of material or labor by ustomer or any third party. 32. LTRONI OMMUNITIONS N LTRONI SINTURS. oth parties expressly agree to electronic transactions and acknowledge that documents they sign electronically will bind them to the same extent as a paper signature. ustomer represents and warrants to ompany that only employees authorized to bind ustomer legally shall electronically sign any document under this greement. ustomer shall comply with any method of electronic communication/payment processing specified by ompany, including electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases, electronic signature, and electronic communication systems, including, without limitation, the use of electronic data interchange ( I ) portals. Notwithstanding the foregoing, e-mails, even those containing a signature block of one of ompany s representatives, shall not constitute a signed writing. 33. OMPLIN WITH PPLIL LWS. a. eneral. ompany and ustomer will comply with all applicable federal, state and municipal laws, regulations, codes, ordinances and orders that pertain to the eliverables, including but not limited to full compliance with any applicable provisions of The Health Insurance Portability and ccountability ct. Where the ustomer is located outside the United States, or where the customer intends to ship the product outside the United States, the ustomer shall be responsible for compliance with all U.S. export laws, and for filing all U.S. lectronic xport Information, as applicable. b. The ustomer acknowledges and agrees that: (i) it shall not violate applicable laws and regulations in performing its duties under this greement; (ii) it does not and shall not engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment) to (a) any government official or employee of any government; (b) any official or employee of any department, agency, or instrumentality of a government; (c) any employee of any corporation or entity owned or controlled by a government; (d) any family member of such officials or employees; (e) any political party, party official, or political candidate; or (f) any other persons, owners, officers, directors, employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retaining business (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase of the eliverables by any party, and (iv) it has full knowledge of and will comply with the
Terms and onditions ompany s ode of onduct for usiness Partners as set forth on the llegion customer website, WHIH IS HRY INORPORT Y RRN. c. The ustomer shall indemnify and hold the ompany harmless from any claim, demand, expense or cost arising from any breach of this rticle. d. The ustomer shall permit the ompany to conduct an audit or review of the ustomer s financial books and records and business operations at such other times that the ompany considers it necessary to confirm compliance with this provision. Such audit may be conducted by representatives of the ompany or, at the ompany s sole discretion, by a certified public accounting firm selected by the ompany. The ustomer shall cooperate with any inquiries from the ompany s thics & ompliance roup. e. violation of this provision constitutes a material breach of this greement and the ompany may terminate any purchase order or this greement immediately, with no opportunity to cure, in accordance with Section 27 of this greement. f. Notwithstanding the foregoing provisions of this Section 33, (i) ompany is not responsible for obtaining or maintaining any permits for the performance of services or the verification or compliance with any code requirements relative to the performance of services, (ii) to the extent any sale of eliverables pursuant to this greement may require approval of the U.S. overnment, ompany s obligations under this greement are conditioned upon the grant of such approval and upon compliance by ustomer with any restrictions imposed by the U.S. overnment in connection with such approval, and (iii) in the event the eliverables are to be used in a nuclear facility, the ustomer shall, prior to such use, arrange for insurance or governmental indemnity protecting ompany against liability. The ustomer hereby releases and agrees to indemnify ompany and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in whole or in part by ompany or its suppliers. g. No Inducements. ach party represents to each other that neither it nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give or will give or offer to give, any sum of money or other material consideration to any person, directly or indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or other governmental permissions to enter into this greement or perform obligations hereunder. h. qual mployment Opportunity. ompany is a U.S. federal contractor that complies with xecutive Order 11246, as amended, and applicable regulations in 41 R Parts 60-1 through 60-60, 29 U.S.. 793 and applicable regulations in 41 R 60-741; and 38 U.S.. 4212 and applicable regulations in 41 R Part 60-250 and 60-300. TH OLLOWIN PROVISIONS R INORPORT HRIN Y RRN: xecutive Order 11246 and 41 R 60-4.3(a); xecutive Order 11701 and 41 R 60-250.5(a), 60-300.5; xecutive Order 11758 and 41 R 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform ct of 2004 and the H-1 Visa Reform ct of 2004; and xecutive Order 13496. i. thical usiness onduct. ustomer shall adopt and comply with ompany s usiness Partner ode of onduct which is XPRSSLY INORPORT HRIN Y RRN. 34. RPRSNTTIONS N WRRNTIS. ustomer represents, warrants and covenants to ompany that: (a) it has the right, power, and authority to enter into this greement and fully perform its obligations hereunder; (b) it has all necessary rights in and to its respective ontent and Marks for use within the scope of this greement, including the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its performance under this greement, including obtaining all such approvals and/or permits as may be required hereunder. 35. NO THIR-PRTY NIIRY. ach party is entering into this greement solely based on the representations contained herein for its own purposes and not for the benefit of any third party. 36. NOTIS N HN O RSS. ll notices or other communications under this greement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at the addresses set forth in this greement. ither party may change its address for notice by giving written notice to the other party. ny notice or other communication shall be deemed given no later than the date actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemed given on the date it is officially recorded as delivered and, in the absence of such record of delivery, it shall be rebuttably presumed to have been delivered on the third usiness ay after it was deposited. Notices sent by e-mail require tangible confirmation of receipt from addressee. 37. SSINMNT. ustomer may not assign this greement without the prior written consent of ompany. ompany may assign its rights and delegate its duties under this greement, without the prior consent of ustomer, to an ffiliate, or to a third party in the event of a spin-off, merger, business combination, consolidation or sale of all, or substantially all, of its assets or business that are related to this greement. The rights and duties in this greement shall bind and inure to the benefit of any such assignee. 38. SVRILITY. If any provision of this greement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive at an alternative arrangement approximating the original business objective of the parties. The remaining terms and conditions of this greement will remain in effect. 39. NO IMPLI WIVR. The failure of either party at any time to require performance by the other party of any provision of this greement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision of this greement constitute a waiver of any succeeding breach of the same or any other provision. 40. MISLLNOUS. (a) This greement does not make either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of the other party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder; (b) The rights and remedies herein reserved to ompany are cumulative and additional to any other rights and remedies provided at law or equity; (c) The official text of this greement is in the nglish language. If this greement is translated into another language, the nglish text will govern any question with respect to interpretation; (d) The headings in this greement are for convenience of reference only and do not affect the meaning of this greement in any manner. INITIONS. apitalized terms have the meanings set forth in this Section, or in the Section in which they first appear in this greement. greement means these llegion Terms and onditions of Sale and Service, together with any applicable ountry Supplement or Region Supplement provided by ompany, and all of the documents referenced herein or therein. ffiliate means any Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with, the ompany. The term control (including the terms controlled by and under common control with ) means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of a Person, whether through the ownership of voting securities, by contract or otherwise. usiness ay means any day except Saturday, Sunday or any other day on which commercial banks located in the United States are authorized or required by Law to be closed for business. ompany means Schlage Lock ompany, LL or any subsidiary or affiliate thereof selling products that are part of the llegion product portfolio. Schlage Lock ompany and/or its subsidiary or affiliates will be severally but not jointly liable under the greement. ompany Marks refers to the Marks of ompany. onfidential Information shall mean any and all information provided by either party to the other party pertaining to the disclosing party s business. onfidential Information shall include, but not be limited to, any bitting lists, formulae for products, manufacturing processes, production techniques, packaging processes, methods, research materials, ideas, marketing plans and related materials, quality standards, test results and data, apparatus, engineering drawings, contract documents, computer software, hardware, or firmware, business activities information such as financial information, reports, projections, books and records, customer and supplier information, and operations, customer and supplier lists and data, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein) that either party may furnish to the other party. onfidential Information shall not include information that: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of any act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known to the Receiving Party without utilizing the onfidential Information; (c) is information disclosed to the Receiving Party by a third party which is not to the Receiving Party s knowledge, after inquiry of the third party, under a duty of confidentiality to the isclosing Party; or (d) is independently developed by the Receiving Party without the use of onfidential Information. The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach. onfidential Information may be furnished in any tangible or intangible form including, but not limited to, writings, drawings, computer and other electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbal communications and regardless of whether such information is marked or designated as confidential. or the avoidance of doubt, all information, knowledge or data disclosed by ompany to ustomer, regardless of whether disclosed in written, tangible, oral, visual or other form, including, without limitation, sample products, equipment, software, or other objects or material, provided by ompany to ustomer, and all information, knowledge or data which was obtained by ustomer from visits to ompany s facilities, shall be considered onfidential Information under this greement. ontent means all information (including without limitation any text, music, sound, photographs, video, graphics, data or software), in any medium, on a particular ompany Web page or Website or in Marketing Materials. ustomer means the purchaser of eliverables from ompany. eliverables means any good or service or both purchased by ustomer from ompany under these eneral Terms and onditions of Sale and Service. nd Users means the purchaser that (a) has acquired a eliverable from ustomer for (i) its own and its ffiliate s/ffiliates internal use and not for resale, remarketing or distribution or (ii) incorporation into its own products and (b) is an individual or entity, other than any federal, state or local agency, office or division. IP means all intellectual property and industrial property rights comprising or relating to/ of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registered by any authorized private registrar or overnmental uthority, web addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyrightable, including copyrights and copyrightable works, software and firmware, application programming interfaces, architecture, files, records, schematics, data, data files, and databases and other specifications and documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights, interests and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world. Marketing Materials means all marketing brochures, buckslips, pamphlets, emails, text, call scripts or other material, whether in printed format, audio or audiovisual format, or in any other format, that contain any (i) ontent relating to the ompany eliverables or (ii) ompany Marks. Marks means collectively the domain names, trademarks, trade names, service marks, trade dress, logos, and the like used or provided by either party for use in connection with this greement. Patents means all patents (including all reissues, divisionals, provisionals, continuations and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent applications, and other patent rights and any other overnmental uthority-issued indicia of invention ownership (including inventor s certificates, petty patents and patent utility models). Person means a person or entity. Price ooks mean ompany s current Price ook in effect for the applicable eliverable being purchased by ustomer. Trade Secrets means and includes business or technical information of either party, including processes, formulas, devices, techniques, compilations and other material that a party attempts to maintain in secret and that derive commercial value for such party from not being generally known to the public or readily ascertainable through independent development or reverse engineering. xterior Hardware vi
Index by Product escription xterior Hardware ngle Stop...11 utomatic lush olt...2, 3, 4 utomatic Wall Holder... 15 uxiliary Pusher... 12 all atch... 13, 16 all atch, djustable... 16 all atch, ual djustable... 16 ar oordinator... 12 ar Window Lift... 7 racket... 12 road utt Hinge... 9 arry ar... 14 asement djuster... 8 asement astener... 7, 8 eiling Hook... 4 hain oor uard... 7 hest Handle... 12 loset Pole Socket... 6 oat & Hat Hook... 3, 4 onstant Latching lush olt... 5 oordinator, ar... 12 oordinator, iller ar... 12 oordinator, Mounting racket... 13 rash Stop... 10 ecorative orner...11 ecorative Hasp... 10 ecorative Hinge... 10 oor ase Stop, Residential. 20, 21 oor olt, utch... 6 oor olt, Mortise... 6 oor uard, hain... 7 oor uard, Solid ar... 7 oor Knocker... 7 oor Numbers... 9 oor Pull... 2, 3, 4, 5 oor Pull, Offset... 5 oor Silencer..................... 23 raw atch... 12 ust Proof Strike... 11 utch oor olt...6 lbow atch... 13 iller ar... 12 inger Pull... 13 lexible oor Stop, Residential.20, 21 loor Stop...2, 3, 4, 5 loor Stop & utomatic Holder.6, 8 loor Stop & Manual Holder... 7 loor Stop & Semi-automatic Holder.6 lush olt, utomatic...2, 3, 4 lush olt, onstant Latching... 5 lush olt, Manual.6, 7, 8, 9, 10 lush Pull... 13, 14 riction Lid Support...11 ravity oordinator... 14 H Handrail racket... 2 Hasp... 10 Hinge Pin Stop... 21, 22 Hinge, 3 Knuckle, ull Mortise... 5, 6 Hinge, 5 Knuckle, ull Mortise... 6, 7, 8, 9 Hinge, 5 Knuckle, Half Surface... 10 Hinge, ontinuous Pin & arrel ull Mortise... 28 Hinge, ontinuous eared ull Surface... 19, 20 Hinge, ontinuous eared Half Surface... 21, 22 Hinge, ontinuous Pin & arrel ull Mortise, ull Wrap... 29, 30 Hinge, ontinuous Pin & arrel Swing lear... 29 Hinge, lectrifies... 11 Hinge, Pocket...52 Hinge, Residential... 12 Hobbyist arrel olt... 9 Holder, Kick own... 16, 17 Hook and Hasp...11 Hook and Staple... 9 I Invisible Latch... 12 K Kick own Holder... 16, 17 Knocker, oor... 7 L Letter ox Plate... 8 Letter ox Sleeve... 8 Lock uard... 2, 3, 4 Long Pulls... 6 M Magnetic atch... 14 Manual lush olt. 6, 7, 8, 9, 10 Manual Wall Holder... 9, 14 Middle utt Hinge... 9 Mortise oor olt...6 Mounting rackets... 13 N Numbers, oor... 9 P Pivot, 1/2" Offset... 43, 44 Pivot, 3/4" Offset 36, 37, 38, 39, 40, 41, 42 Pivot, enter Hung 45, 46, 47, 48 Pivot, Intermediate... 49, 50 Pivot, Intermediate, lectrified... 51 Pivot, Pocket...52 Pocket Sliding oor olt... 15 Protection Plates... 13 Pull Plate... 7, 8 Pull Plate (less pull)... 6 Push ar... 8 Push ar with Pull... 9 Push Plate... 6 R Riser... 2, 4 Roller umper... 19 Roller atch... 15 Roller Latch... 8, 9, 10 S Screen oor Pull... 10 Side Window Lock... 7 Slide oor dge Pull... 15 Sliding oor Pull... 16 Solid ar oor uard... 7 Stop, rash... 10 Stop, Hinge Pin... 21, 22 Strike Plate... 10 Strike, ust Proof... 11 Storm oor Latch... 9 Support Hinge...11 Surface olt... 2, 3 Surface olt, ecorative... 4, 5 V Vandal Resistant Trim... 10, 11, 12 Viewer, One Way... 5, 6 W Wall umper... 11, 12 Wall Holder, utomatic... 15 Wall Holder, Manual... 9, 14 Wall Stop... 9, 10, 14 Wardrobe Hook... 5 Window Lock... 6 vii
Numerical Part Index 1... 14 P1... 11 L1... 2 M1... 13 M1... 13 M1V... 13 2... 13 P2... 11 M2... 13 M2... 13 M2V... 13 31............................... 5 31HW........................... 6 3P1... 5 3SP1...6 M1... 13 M3... 13 M3V... 13 51... 7 51HW...8 51S........................... 10 51SHW....................... 10 51WT...8 54...9 54HW...9 5P1... 7 07,... 6 OR7... 14 L7... 2 S9... 6 OR9... 14 L10... 2 L11... 12 L11... 3 WS11... 9 WS11X... 9 L12... 12 L12... 3 S13... 2 L13... 4 L14... 12 L14... 4 R14... 2 S17... 2 S18...11 S18L... 3 S18S... 3 L20... 12 WS20... 9 WS20X... 9 L21... 13 L21... 13 22... 13 L22... 13 25... 10 026... 7 026,... 7 2 30... 9 RL30...8 31... 2 OR32... 12 32... 2 L32... 12 RL32...8 33... 2 WS33... 10 WS33X... 10 RL36... 10 RL38... 10 40................................. 4 S40... 6 WS40... 15 41... 3 S41............................... 6 42... 15 OR42... 12 42... 3 S42... 6 S43... 6 L44... 12 045H... 19 WS45... 15 WS45X... 15 046H... 19 S48...6 51............................... 4 OR52... 12 52... 4 053H...22 53... 4 054,...6 054H...22 59... 2 059,... 2 60...20 060,...20 OR60... 12 61...20 061,...20 61... 5 62... 5 63... 21 64... 21 SR64... 23 SR65... 23 WS65... 10 66... 8 066... 7 SR66... 23 69... 21 70... 22 71... 8 72... 22 OR72... 12 73... 22 78... 9 86... 9 90... 7 112H... 21 S115... 10 157H... 21 159... 2 210H...22 218... 13 221... 14 222... 14 223... 14 224H...22 227... 15 230... 15 253... 5 261... 6 262... 6 265... 7 325... 14 326... 14 327... 14 330... 15 335... 15 336... 15 345... 16 347... 16 349... 16 358... 8 S360... 2 WS401... 11 WS402... 11 WS404VX... 11 405... 3 WS406... 12 WS407... 12 411R... 13 430... 4 S434... 3 R435... 4 S436... 4 R437... 4 S438............................. 4 S441... 5 WS443... 14 S444... 5 WS445............................14 S446... 7 WS447... 14 S448... 5 WS449... 14 S450... 7 S452... 15 S453... 2 S455... 15 457... 9 458... 10 458... 10 R470... 19 R471... 19 R472... 19 481... 7 482... 7 S495... 8 S496... 8 S497... 8 S544............................. 17 S555... 17 571... 3 572... 3 574... 4 575... 4 580... 4 581... 5 582... 5 585... 6 586... 6 600, 700... 27 601... 8 602, 702... 27 611, 711... 28 620... 8 STK685... 10 STK685L... 10 U696... 5 698... 5 U698... 5 700...27 700... 6 U700... 6 701... 6 U701... 6 702...27 705... 28 711... 28 715... 29 VR810-T... 10 VR810-NL... 10 VR814-T... 10 VR814-NL... 10 S895...11 VR900...11 VR900LLP...11 VR910-T... 12 VR910M-T... 12 VR910M-NL... 12 VR910-NL... 12 980... 9 990... 16 991... 16 1010... 12 1011... 12 1012... 12 1020... 12 1021... 12 RL1152... 10 S1153... 18 S1154... 18 S1600... 3 S1601M1... 3 S1601M2... 3 02-3107,... 8 02/25... 7 7212... 34 7212-7212V-7222 INT...47 7212V... 34 7215, 7215...35 7215-7226-7227 INT...47 7215-7226-7227 INT...47 7215PT-7226PT-7227PT... 49 7222... 36 7226, 7226... 37 7227, 7227... 38 7230... 39 7230-7237 INT... 48 7237... 40 7244... 41 7244-7245 INT... 48 7245... 42 7253... 43 7255... 44 7255J... 44 7256... 45 7259... 46 8102... 2 8103... 2 8103Z... 3 8105... 3 8111-5... 4 8112-5... 4 8121... 5 8190... 5 8200... 6 8300... 6 8302... 7 8303... 7 8305... 7 8311... 8 8400... 13 8402... 13 9011... 9 9031... 9 9041... 9 9042... 9 9070... 10 9071.............................. 10 9072... 10 9100... 8 9103Z... 9 9110... 10 9120... 10 9130...11 9190... 9 9210...11 9212...11 9220...11 9264... 6 9265... 6 9266... 6 9267... 6 9311...11 9320... 12 9321... 12 9330... 12 9340... 12 91105... 50 91105-PT... 50 viii xterior Hardware
inishes xterior Hardware HM US escription ase Material 609 US5 Satin rass Plated, lackened, Satin Relieved, lear oated luminum 628 US28 Satin luminum, lear oated luminum 666 US3 right rass Plated, lear oated luminum 666 US3L right rass Plated, lear oated luminum 667 US4 Satin rass Plated, lear oated luminum 668 US10 Satin ronze Plated, lear oated luminum 668 US10L Satin ronze Plated, lear oated luminum 669 US14 right Nickel Plated luminum 670 US15 Satin Nickel Plate luminum 673 US92 luminum, lear oated luminum 689 US65 luminum Painted luminum 702 US26 Satin hrome Plated luminum 703 US10 Oxidized Satin ronze Plated, Oil Rubbed luminum 710 313N ark ronze nodized luminum 711 315N lack nodizes luminum 713 US26 luminum 716 10 Satin ronze Plated, lear oated luminum LK lack poxy oated luminum W White poxy oated luminum T Tan poxy oated luminum RN rown poxy oated luminum LR lear xpoxy oated luminum US5 Satin rass Plated, lackened, Satin Relieved, lear oated luminum 5 luminum luminum P luminum, Prime Paint luminum R Red poxy oated luminum US26 Satin hrome Plated luminum 690 US69 ark ronze Painted ny 605 US3 right rass, lear oated rass 606 US4 Satin rass, lear oated rass 689 SP28 luminum Painted rass 691 SP10 Light ronze Painted rass 693 SPLK lack Painted rass 695 SP313 ark ronze Painted rass 706 SP4 rass rass 716 Satin ronze Plated, lear oated rass P600 P600 Primed for Paint rass RN rown rass RY ray rass TN Tan rass White White Rubber rass 618 US14 right Nickel Plated, lear oated rass, ronze 619 US15 Satin Nickel Plated, lear oated rass, ronze 620 US15 Satin Nickel Plated, lackened, Satin Relieved, lear oated rass, ronze 622 US19 lat lack oated rass, ronze 625 US26 Polished hrome Plated rass, ronze 626 US26 Satin hrome Plated rass, ronze 612 US10 Satin ronze, lear oated ronze ix
inishes HM US escription ase Material 613 US10 ark Oxidized Satin ronze, Oil Rubbed inish ronze White White Plastic LK lack Plastic Plastic RN rown Plastic Plastic LR lear Plastic Plastic P Plastic Plastic 3 Rubber Rubber R Rubber Rubber rown rown Rubber Rubber Tan Tan Rubber Rubber ray ray Rubber Rubber 629 US32 Polished Stainless Steel Stainless Steel 300 630 US32 Satin Stainless Steel Stainless Steel 300 654 US32 Satin Stainless Steel Stainless Steel 400 600 USP Primed for Paint - Steel Steel 600 P Primed for Paint - Steel Steel 603 2 Zinc Plated Steel 603 2 Zinc Plated Steel 604 2 Zinc Plated/ichromate Sealed Steel 632 US3 right rass Plated, lear oated Steel 638 US5 Satin rass Plated, lackened, Satin Relieved, lear oated Steel 639 US10 Satin ronze Plated, lear oated Steel 640 US10 ark Oxidized Satin ronze, Oil Rubbed inish Steel 645 US24 right Nickel Plated, lear oated Steel 646 US15 Satin Nickel Plated, lear oated Steel 652 US26 Satin hrome Plated Steel 689 SP28 luminum Painted Steel 693 SPLK lack Painted Steel 695 SP313 ark ronze Painted Steel 695 SP313 ark ronze Painted Steel 706 SP4 rass Steel 716 Satin ronze Plated, lear oated Steel 716 10 Steel 5 Steel Steel 406 Zinc/rass ntimicrobial oating (M) inhibits the growth of bacteria, available on many Ives rchitectural Hardware Products. xterior Hardware x
Packaging, Handing Packaging Key Many Ives items are available in a variety of packaging forms designated by a prefix. The Ives Price ook contains the specific packaging options for each Ives product. elow is a description of these options. Symbol escription of Package S arded ommercial rade arded Schlage randed arded SP Slim-Pak SPS oor Handing Schlage randed Slim-Pak LH INSI RH Left Hand Right Hand OUTSI INSI LR RR Left Hand Right Hand Reverse evel OUTSI Reverse evel xterior Hardware xi
xterior Hardware rchitectural Hinges, ontinuous Hinges and Pivots Table Of ontents rchitectural Hinges page eneral Hinge Information.... 2 How to Order... 3 NSI Hinge Identification Reference.... 4 3P1 3 Knuckle, ull Mortise.... 5 31 3 Knuckle, ull Mortise.... 5 31HW 3 Knuckle, ull Mortise.... 6 3SP1 3 Knuckle, ull Mortise.... 6 5P1 5 Knuckle, ull Mortise.... 7 51 5 Knuckle, ull Mortise.... 7 51HW 5 Knuckle, ull Mortise.... 8 51WT 5 Knuckle, ull Mortise.... 8 54 5 Knuckle, ull Mortise.... 9 54HW 5 Knuckle, ull Mortise.... 9 51S 5 Knuckle, ull Mortise.... 10 51SHW 5 Knuckle, ull Mortise.... 10 lectrified Hinge.... 11 Residential Hinges....12 ontinuous Hinges....13 Pivots...31 1 1
rchitectural Hinges, ontinuous Hinges and Pivots 2 xterior Hardware 2 eneral Hinge Information SLTION O TH PROPR WIHT N RIN TYP Standard Weight... Plain earing Standard Weight... all earing, oncealed earing Heavy Weight... all earing, oncealed earing onsiderations to determine Weight and earing type: - Weight of oor - requency of use - rame - oor Hardware lways use ball bearing or concealed bearing hinges for doors with door closers and in all fire rated openings. Heavy weight doors and high frequency doors should use heavy weight ball bearing or concealed bearing hinges. UILINS OR HIN MTL - Interior door or non-corrosive area use: Plated or painted Steel - Interior labeled door use: Plated or Painted Steel, Stainless Steel - Interior door in corrosive area use: Stainless Steel, rass, ronze - xterior doors use: Stainless Steel, rass, ronze Standard pin material are rass Hinge Steel Pin, Stainless Steel Hinge Stainless Steel Pin, Steel Hinge Steel Pin UILINS OR RQUNY O OOR US: uild Type aily Usage Hinge Type High requency/ Heavy Weight oor Large epartment Store ntrance 5,000 Heavy Weight Hospital orridor and Surgical oors 5,000 Heavy Weight Large Office uilding ntrance 4,000 Heavy Weight School ntrance 1,250 Heavy Weight School Toilet oor 1,250 Heavy Weight Office Stairwell 500 Heavy Weight Office uilding Toilet oor 400 Heavy Weight Medium requency/ Medium Weight oor School orridor oor 100 Standard Weight Hospital onsultation Rooms 100 Standard Weight Office uilding orridor oor 80 Standard Weight Store Toilet oor 60 Standard Weight Storage Room 50 Standard Weight Low requency /Light oor Residential ntrance 30 Plain earing Interior Residential 20 Plain earing NSI/HM rade/minimum ycle requirements rade 1: 2,500,000 Heavy Weight all & oncealed earing rade 2: 1,500,000 Standard Weight all & oncealed earing rade 3: 350,000 Light Weight Plain earing onsiderations to determine Hinge size - oor Width - oor Thickness - Weight - learance UILINS OR HIN HIHT OOR THIKNSS OOR WITH HIN HIHT IN INHS IN INHS IN INHS 1-3/8 Up to 32 3-1/2 1-3/8 32 to 37 4 1-3/4 Up to 36 4-1/2 1-3/4 36 to 48 5 1-3/4 Over 48 6 2-2-1/2 Up to 42 5 heavy weight 2-2-1/2 Over 42 6 heavy weight learance Requirement* OOR THIKNSS LRN N HIN OPN WITH 1-3/8 3/4 4 1-3/4 1 4 1-3/4 1-1/2 4-1/2 1-3/4 2 5 1-3/4 3 6 2 1 4-1/2 2 1-1/2 5 2 2-1/2 6 2-1/4 1 5 2-1/4 2 6 2-1/2 3/4 5 2-1/2 1-3/4 6 3 3/4 8 3 2-3/4 8 *istance needed between wall and door at 180º to allow for any projections from wall; trim, decorative molding, etc. UILINS OR NUMR O HINS - oors under 7'6"... 3 hinges - oors over 7'6"... 4 hinges LOTION O HINS 5" (127mm) 10" (254mm) qual Top hinge 5" from jamb rabbet to top of barrel ottom hinge 10" from bottom edge of barrel to finished floor Third hinge centered between top and bottom hinges Note: Some western states use a standard 7" from top and 11" from the bottom
rchitectural Hinges, ontinuous Hinges and Pivots Ives Hinge Number System Please note: or availability of specific models, please refer to the item s catalog page or consult ustomer Service. How to Order: 5 - - 1 - HW - 4.5x4.5-652 - NRP 3 Number of Knuckles: 3-3 Knuckle 5-5 Knuckle unction: P Plain earing all earing oncealed earing SP Spring Hinge Type: 1 ull Mortise 2 Half Mortise 3 ull Surface 4 Half Surface Weight/Options: lank Standard Weight HW Heavy Weight S Swing lear SH Security Stud WT Wide Throw HT Hospital Tip R Round orners, 1/4" or 5/8" Radius Size xamples: 3.5 x 3.5 4.5 x 5 4 x 4 4.5 x 6 4.5 x 4 5 x 4.5 4.5 x 4.5 5 x 5 5 x 6 5 x 7 Larger sizes, up to 6 x 8 are available. onsult factory. inish (Some models require extended lead times): 600 USP - Steel 605 US3 - rass 606 US4 - rass 612 US10 - rass 613 US10 - rass 619 US15 - rass 625 US26 - rass 626 US26 - rass 630 US32 - Stainless 632 US3 - Steel 633 US4 - Steel 639 US10 - Steel 640 US10 - Steel 641 US10 - Steel 643 US11 - Steel 646 US15 - Steel 651 US26 - Steel 652 US26 - Steel Special Pins pplications: NRP Non-Removable Pin TW4 our Wire TW8 ight Wire MON Monitor TW4M our Wire with Monitor TW8M ight Wire with Monitor 3 xterior Hardware
rchitectural Hinges 4 NSI Hinge Identification Reference = NSI irst number indicates material 1 ast, forged or extruded brass or bronze 2 Wrought brass or bronze 5 Stainless steel 8 Wrought or forged steel, or malleable iron Second number indicates product type 1 ull mortise 2 Half mortise 3 ull surface 4 Half surface 5 nchor, pivot reinforced or thrust pivot unit or hinge sets 6 Olive knuckle hinges 7 Pivot hinge 8 Rescue hardware Third number indicates function 1 nti-friction bearing 2 nti-friction bearing, swing clear 3 Plain bearing 4 4 to 0, special conditions ourth number indicates grade 1 rade 1, 4 xtra Heavy uty 2 rade 2, 2 Standard uty 3 rade 3, Plain earing xample: 8111 Steel, ull Mortise, nti-friction, rade 1 5112 Stainless, ull Mortise, nti riction earing, rade 2 xterior Hardware 4
rchitectural Hinges Meets NSI/HM 156.1 8133 Steel 5133 Stainless Steel 2133 rass 3P1 3 Knuckle, Plain earing ull Mortise Hinge or standard weight doors Low frequency usage Packed with wood and metal screws Not for use with a door closer. Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security asteners - Pin-in-Socket Size (Inches) Size (mm) auge 3.5 x 3.5 90 x 90 0.134 4 x 4 102 x 102 0.134 4.5 x 4 114 x 102 0.134 4.5 x 4.5 114 x 114 0.134 5 x 4.5 127 x 114 0.134 5 Meets NSI/HM 156.1 8112 Steel 5112 Stainless Steel 2112 rass 31 3 Knuckle, oncealed earing ull Mortise Hinge or standard weight doors Medium frequency usage Packed with wood and metal screws Options NRP, Non-Removable Pin SH, Security stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket Size (Inches) Size (mm) auge 3.5 x 3.5 90 x 90 0.134 4 x 4 102 x 102 0.134 4.5 x 4 114 x 102 0.134 4.5 x 4.5 114 x 114 0.134 5 x 4.5 127 x 114 0.134 inishes brass Ives inish US3 US4 US10 US10 US10 US11 US15 US26 US26 HM 605 606 612 613 614 616 619 625 626 inishes steel Ives inish USP US3 US4 US10 US10 US10 US11 US15 US26 US26 HM 600 632 633 639 640 641 643 646 651 652 inishes stainless steel Ives inish US32 US32 HM 629 630 xterior Hardware 5
rchitectural Hinges 6 Meets NSI/HM 156.1 8112 Steel 5112 Stainless Steel 2112 rass Meets NSI/HM 156.7 K81071 Steel K51071 Stainless Steel UL listed for use with fire rated doors 31HW 3 Knuckle, oncealed earing ull Mortise Hinge or heavy weight doors High frequency usage Packed with wood and metal screws Options NRP, Non-Removable Pin SH, Security stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket Size (Inches) Size (mm) auge 4.5 x 4 114 x 102 0.180 4.5 x 4.5 114 x 114 0.180 5 x 4.5 127 x 114 0.190 5 x 5 127 x 127 0.190 3SP1 3 Knuckle Spring ull Mortise Hinge or automatic closing of doors Packed with wood and metal screws Options HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket Size (Inches) Size (mm) auge 4 x 4 102 x 102 0.134 4.5 x 4 114 x 102 0.134 4.5 x 4.5 114 x 114 0.134 xterior Hardware inishes brass Ives inish US3 US4 US10 US10 US10 US11 US15 US26 US26 HM 605 606 612 613 614 616 619 625 626 6 inishes steel Ives inish USP US3 US4 US10 US10 US10 US11 US15 US26 US26 HM 600 632 633 639 640 641 643 646 651 652 inishes stainless steel Ives inish US32 US32 HM 629 630
rchitectural Hinges 5P1 5 Knuckle, Plain earing ull Mortise Hinge or standard weight doors Low frequency usage Packed with wood and metal screws Not for use with a door closer. 7 Meets NSI/HM 156.1 8133 Steel 5133 Stainless Steel 2133 rass Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket Size (Inches) Size (mm) auge 3.5 x 3.5 89 x 89 0.123 4 x 4 102 x 102 0.134 4.5 x 4 114 x 102 0.134 4.5 x 4.5 114 x 114 0.134 5 x 4.5 127 x 114 0.134 Meets NSI/HM 156.1 8112 Steel 5112 Stainless Steel 2112 rass 51 5 Knuckle, all earing ull Mortise Hinge or standard weight doors Medium frequency usage 2 ball bearing Packed with wood and metal screws Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket Size (Inches) Size (mm) auge 3.5 x 3.5 80 x 102 0.130 4 x 4 102 x 102 0.130 4.5 x 4 114 x 102 0.134 4.5 x 4.5 114 x 114 0.134 inishes brass Ives inish US3 US4 US10 US10 US10 US11 US15 US26 US26 HM 605 606 612 613 614 616 619 625 626 Size (Inches) Size (mm) auge 5 x 4.5 127 x 114 0.146 5 x 5 127 x 127 0.146 inishes steel Ives inish USP US3 US4 US10 US10 US10 US11 US15 US26 US26 HM 600 632 633 639 640 641 643 646 651 652 inishes stainless steel Ives inish US32 US32 HM 629 630 xterior Hardware 7
rchitectural Hinges 8 51HW 5 Knuckle, all earing, Heavy Weight ull Mortise Hinge or heavy weight doors High frequency usage 4 ball bearing Packed with wood and metal screws Meets NSI/HM 156.1 8111 Steel 5111 Stainless Steel 2111 rass Meets NSI/HM 156.1 8111 Steel Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket Size (Inches) Size (mm) auge 4.5 x 4 114 x 102 0.180 4.5 x 4.5 114 x 114 0.180 51WT 5 Knuckle, all earing, Wide Throw ull Mortise Hinge or medium weight doors Medium frequency usage 2 ball bearing Packed with wood and metal screws Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip R, Round orners - 1/4" or 5/8" Radius S, Security astners - Pin-in-Socket Size (Inches) Size (mm) auge 5 x 4.5 127 x 114 0.190 5 x 5 127 x 127 0.190 xterior Hardware Size (Inches) Size (mm) auge 4.5 x 5 114 x 127 0.134 4.5 x 6 114 x 152 0.134 5 x 6 127 x 152 0.146 5 x 7 127 x 178 0.146 5 x 8 127 x 203 0.146 inishes brass Ives inish US3 US4 US10 US10 US10 US11 US15 US26 US26 HM 605 606 612 613 614 616 619 625 626 8 inishes steel Ives inish USP US3 US4 US10 US10 US10 US11 US15 US26 US26 HM 600 632 633 639 640 641 643 646 651 652 inishes stainless steel Ives inish US32 US32 HM 629 630