Cisco 880 Series Integrated Services Routers

Cisco 880 Series Integrated Services Routers The Cisco 880 Series Integrated Services Routers combine Internet access, security and wireless services onto a single, secure device that is simple to use and manage for small businesses and enterprise small branch and teleworkers. The Cisco 880 Series delivers features, including firewall, content filtering, VPNs, and WLANs, at broadband speeds to small offices. Easy deployment and centralized management features enable the Cisco 880 Series to be deployed by enterprises or service providers in small branch offices or small businesses. Product Overview Cisco 880 Series Integrated Services Routers are fixed-configuration routers that provide collaborative business solutions for secure data communication to small businesses and enterprise teleworkers. The Cisco 880 Series offers concurrent broadband services over 3G 1, Metro Ethernet, and multiple types of DSL and provides business continuity. Wireless 802.11n and 3G offer LAN and WAN mobility. The Cisco 880 Series provides the performance required for concurrent services, including firewall, intrusion prevention, content filtering, and encryption for VPNs; optional 802.11g/n for mobility; and quality of service (QoS) features for optimizing voice and video applications. In addition, Cisco Configuration Professional is a Web-based configuration tool that simplifies setup and deployment. Centralized management capabilities give network managers visibility and control of the network configurations at the remote site. Cisco 880 Series Integrated Services Routers offer: High performance for broadband access in small offices and small branch and teleworker sites Collaborative services and data communication Business continuity and WAN diversity with redundant WAN links: Fast Ethernet, G.SHDSL, 3G, and ISDN Enhanced security, including: Firewall with advance application and control for e-mail, IM instant messaging and HTTP traffic Site-to-site remote access and dynamic VPN services: IP Security (IPSec) VPNs (Triple Data Encryption Standard [3DES] or Advanced Encryption Standard [AES]), Dynamic Multipoint VPN [DMVPN], Group Encrypted Transport VPN with onboard acceleration, and Secure Sockets Layer (SSL) VPN. Intrusion prevention system (IPS): an inline, deep-packet inspection feature that effectively mitigates a wide range of network attacks. Content filtering: a subscription-based integrated security solution that offers categorybased reputation rating; keyword blocking; and protection against adware, malware, spyware, and URL blocking. 1 Availability 2Half Calendar 2008 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 1

4-port 10/100 Fast Ethernet managed switch with VLAN support; two ports support Power over Ethernet (PoE) for powering IP phones or external access points Secure 802.11g/n access point option based on draft 802.11n standard with support for Autonomous or Cisco Unified WLAN architectures CON/AUX port for console or external modem 1 USB1.1 port for security e-token credentials, booting from USB, loading configuration Easy setup, deployment, and remote management capabilities through Web-based tools and Cisco IOS Software Figure 1 shows a Cisco 881 Integrated Services Router. Figure 1. Cisco 881 Integrated Services Router with Integrated 802.11n Access Point Table 1 lists the routers that currently make up the Cisco 880 Data Series. Table 1. Cisco 880 Series Data Models Models WAN Interface LAN Interfaces 802.11g/n Option Integrated 3G* Integrated ISDN Dial Backup Cisco 881 10/100-Mbps Fast Ethernet 4-port 10/100-Mbps managed switch Yes (Cisco 881W) Yes (Cisco 881G) Cisco 888 G.SHDSL 4-port 10/100-Mbps managed switch Yes (Cisco 888W) Yes (Cisco 888G) Yes * Availability 2Half Calendar 2008 The Cisco 880 Series is ideal for small branch offices and teleworkers who need to be connected to larger enterprise networks as well as small businesses. The Cisco 880 Series helps extend corporate networks to secure remote sites, while giving users access to the same applications found in a corporate office. This applies to both data and voice applications, where IP phones can be used to extend a corporate voice extension to the remote office. When users require WLAN access, visibility and control of network security are even more critical at the remote site. The Cisco 880 Series meets this need with a single device that combines integrated 802.11g/n capabilities with security features such as Wi-Fi Protected Access (WPA), including authentication with IEEE 802.1X with Cisco Extensible Authentication Protocol (LEAP) and Protected EAP (PEAP) and encryption with WPA Temporal Key Integrity Protocol (TKIP). (See wireless solution overview and security data sheet for more information.) The Cisco 880 Series models that include the integrated Access Point can utilize both Autonomous or Cisco Unified WLAN modes. In Cisco Unified Mode, as part of an Enterprise WLAN architecture, all WLAN functionality is centrally managed through Cisco WLAN Controllers and the Cisco Wireless Control System. 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 13

Service providers and value-added resellers can take advantage of the Cisco 880 Series to provide a true business-class broadband service. Business customers are using broadband access to connect to the Internet or to connect offices together and require a platform that incorporates security without sacrificing performance. Many of these customers are connecting computers in offices through WLANs; having a single device for both WAN and WLAN access provides a new option for managed services. These customers also require a higher level of support to keep their networks up and running. Services with these customers should be simple to set up, while allowing a level of remote management and troubleshooting to quickly address support inquiries. The Cisco 880 Series meets the requirements of small offices and managed services providers. Figure 2 shows deployment scenarios. Figure 2. Deployment Scenarios Applications The Cisco 880 Series is ideally suited to be deployed in a small office or in a small office that is part of a large network, most often with a secure VPN connection. These types of offices can include the following: Small remote office: Connects users in a small remote office, such as insurance agents, lawyer offices, or sales offices. When connecting to the main office, VPN encryption and integrated security such as firewall and intrusion prevention protect the network at every perimeter. IT managers can centrally manage the remote site to quickly troubleshoot any network issues. For added reliability, customers can also use the integrated 3G or ISDN backup or through an external modem, should the primary broadband link fail. Integrated secure unified WLAN connectivity simplifies the deployment and management devices at 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 13

the remote site. Redundant WAN links offer business continuity, enabling nondisruptive business operation. Virtual office: The Cisco 880 Series is ideal for corporate teleworkers, who might have a mix of broadband connection types such as DSL, 3G, and Metro Ethernet. The Cisco 880 Series provides a secure virtual office with all the collaborative services such as data, voice and video. Redundant WAN links help ensure business continuity. QoS features in the Cisco 880 Series allow an IP phone to be connected to the router, giving voice traffic precedence over data applications. Integrated WLAN support in the Cisco 880 Series helps ensure that if wireless connectivity is to be used, it can be done securely. (See Cisco Business-Ready Teleworker Solutions for more information.) Remote call center agent: Similar to teleworking applications, this solution extends the Cisco IP Contact Center solution for telephone call center agents to remote sites. With a high-quality, secure connection through the Cisco 880 Series, the call center agent can be dispersed away from costly call center facilities while maintaining secure and productive voice and data access in the home. Business continuity solutions in the Cisco 880 Series provide reliability and continuous business operation. Retail VPN: Retail stores migrating from dialup connections for point-of-sale transactions can use the Cisco 880 Series to take advantage of low-cost broadband access with the required security to comply with payment card industry (PCI) and other data security requirements. Multiple devices and applications can then be added to the store network to take advantage of the increased bandwidth and also incorporate optional WLAN support to enable secure mobility and enhance productivity. Managed services: Service providers and value-added resellers can use the Cisco 880 Series as a platform to offer differentiated business-class security and WLAN services for small to medium-sized business customers. s and Benefits Table 3 lists the features and benefits of the Cisco 880 Series Integrated Services Routers. Table 2. s and Benefits Benefit Increased Performance to Run Concurrent Services Enhanced Security Redundant WAN Links 4-Port 10/100-Mbps Managed Switch AUX/CONS Port The performance in a Cisco 880 Series router allows customers to take advantage of broadband network speeds while running secure, concurrent data, voice, video, and wireless services. Integrated stateful inspection firewall for network perimeter security High-speed IPSec 3DES and AES encryption for data privacy over the Internet Intrusion prevention to enforce security policy in a larger enterprise or service provider network Content filtering offers category-based URL classification and blocking, thus providing increased productivity and better use of company resources. Provides business continuity and WAN diversity with multiple WAN links: Fast Ethernet, G.SHDSL, 3G, ISDN. Allows multiple devices to be connected in a small office, with the ability to designate a port as network edge. Optional external PoE adapter for powering IP phones and external access points, to avoid individual power supplies or power injectors. VLANs allow for secure segmentation of network resources. Single dual-purpose port provides direct connection to a console or external modem for management or backup access point. 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 13

Optional 802.11g/n Access Point Real Time Clock Cisco Configuration Professional Unified Wireless Management Benefit Broadband router with secure integrated access point in a single device. Integrated Wi-Fi Access Point with IEEE 802.11n draft 2.0 standard support for mobile access to high-bandwidth data, voice and video applications through the use of multipleinput multiple-output (MIMO) technology that provides increased throughput, reliability and predictability. Supports both autonomous and unified modes. Built-in real-time clock maintains an accurate date and time for applications that require an accurate time stamp, such as logging and digital certificates. Cisco Configuration Professional uses smart wizards and task-based tutorials, which can be used by resellers and customers to quickly and easily deploy, configure, and monitor a Cisco access router without requiring knowledge of the Cisco IOS Software command-line interface (CLI). Provides automated and simplified configuration and management of APs without manual intervention Unified HREAP provides the following: WLAN services to remote and branch offices without deploying a wireless LAN controller at each location Centrally configure and control unified WLAN services for remote offices through a wide area network (WAN) link Allows flexibility in setting up wireless access at remote locations by specifying how traffic is to be bridged or tunneled Summary Cisco 880 Series Integrated Services Routers combine increased network performance with advanced security to allow small office customers to get the most from their broadband connections. With models supporting different broadband technologies such as DSL, 3G, and Metro Ethernet, the Cisco 880 Series can be deployed at any small office location. Optional integrated 802.11g/n wireless capabilities provide true business-class WAN and WLAN access in a single solution. With the Cisco 880 Series, enterprise IT managers and service providers can take advantage of a solution that can be easily set up at the remote site and can be centrally managed to reduce ongoing operational costs. Product Specifications Tables 3 through 5 list software and hardware features of the Cisco 880 Series. Table 3. Cisco IOS Software s on Cisco 880 Series: Advanced Security Set (Default) Description IP and IP Services s Routing Information Protocol (RIPv1 and RIPv2) Generic routing encapsulation (GRE)/MGRE Cisco Express Forwarding 802.1d Spanning Tree Protocol Layer 2 Tunneling Protocol (L2TP) Layer 2 Tunneling Protocol Version 3 (L2TPv3) Network Address Translation (NAT) Dynamic Host Configuration Protocol (DHCP) server/relay/client Dynamic DNS DNS Proxy DNS Spoofing Access control lists (ACLs) 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 13

DSL and ATM s (DSL Models Only) Switch s Security s QoS s Management s High-Availability s Number of Recommended Users Description ATM Variable Bit Rate/real-time (VBR-rt) ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit Rate/non-realtime (VBR-nrt) ATM Operation, Administration, and Maintenance (OAM) Support for F5 Continuity Check; segment and end-to-end loopback; and Interim Local Management Interface (ILMI) support Dying Gasp support TX ring adjustment VC bundling Per-VC queuing Per-VC traffic shaping 20 ATM virtual circuits RFC 1483/2684 Point-to-Point Protocol over ATM (PPPoA) PPP over Ethernet (PPPoE) Auto MDI-MDX 8 802.1Q VLANs MAC Filtering 2-port 802.3af and Cisco compliant PoE Switch Port Analyzer (SPAN) Storm Control Smartports Secure Connectivity: SSL VPN for secure remote access Hardware-accelerated DES, 3DES, AES128, AES192, AES256 Public Key Infrastructure (PKI) support 20 IPSec Tunnels Cisco Easy VPN Client and Server NAT transparency Zone-Based Policy Firewall VRF-aware stateful Inspection Routing Firewall Stateful Inspection Transparent Firewall Advanced Application Inspection and Control Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy Weighted Fair Queuing (WFQ) 20 Class-Based WFQ (CBWFQ) Policy-based routing (PBR) Class-Based QoS MIB CoS to DSCP mapping Cisco Configuration Professional Cisco Configuration Express Cisco Configuration Engine support Cisco AutoInstall IP SLA Embedded Event Manager (EEM) CiscoWorks Cisco Security Manager Telnet, Simple Network Management Protocol (SNMPv3), SSH, CLI and HTTP management RADIUS and TACACS+ Out-of-band management with ISDN S/T port or external modem through virtual auxiliary port WCS for management of Unified APs in models supporting WLAN Virtual Router Redundancy Protocol (VRRP) (RFC 2338) Hot Standby Router Protocol (HSRP) MHSRP Dial backup with external modem through virtual auxiliary port Dial backup with ISDN S/T port (DSL models only) 3G backup 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 13

Table 4. Cisco IOS Software s on Cisco 880 Series: WLAN s (Available with Wireless Option) Description WLAN Hardware IEEE 802.11n draft 2.0 standard based access point with 802.11 b/g compatibility Automatic rate selection for 802.11g/n Captive omnidirectional 2dBi gain dipole antennas 2x3 MIMO radio operation Wi-Fi 802.11n Draft v2.0 certified WLAN Software s Autonomous Access Point WCS support for monitoring of autonomous mode access points Maximize throughput or maximize range option Software-configurable transmit power Radio roles include access point, root bridge, non-root bridge, and workgroup bridge Wireless Multi Media Certification (WMM) TSPEC Call Admission Control to ensure voice quality is maintained Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency WLAN Security s 802.11i Wi-Fi Protected Access (WPA) and AES (WPA2) Certifications EAP Authentication: Cisco LEAP, PEAP, EAP-TLS, EAP-FAST, EAP-SIM, EAP-MD5, EAP- TTLS Static and dynamic Wired Equivalent Privacy (WEP) Temporal Key Integrity Protocol/Simple Security Network (TKIP/SSN) encryption MAC authentication/filter User database for survivable local authentication using LEAP and EAP-FAST Configurable limit to the number of wireless clients Configurable RADIUS accounting for wireless clients PSK (Pre Shared Keys) (WPA-SOHO) SSIDs 16 Wireless VLANs 8 Encrypted Wireless VLANs 8 MBSSIDs 16 Cisco IOS Software Advanced IP Services Set (Optional Software Upgrade) The Advanced IP Services software image has all the features of the Advanced Security software image, with the addition of the following features. Table 5. Cisco IOS Software s on Cisco 880 Series: Advanced IP Services Set (Optional Software Upgrade) Description IP and IP Services s Switch s Open Shortest Path First (OSPF) Border Gateway Protocol (BGP) Enhanced Interior Gateway Routing Protocol (EIGRP) VRF Lite NHRP BFD WCCP Dynamic and static port security Secure MAC address IGMPv3 snooping 802.1x 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 13

Security s QoS s Metro Ethernet s Description Secure Connectivity DMVPN Tunnel-less Group Encrypted Transport VPN VRF-aware IPSec SSL VPN IPSec over IPv6 Adaptive Control Technology SIP Application Layer Gateway Cisco IOS Firewall VRF-aware Firewall Content Filtering Subscription based Content Filtering Websense and Smartfilter using WCCP Cisco IOS Software black and white lists Integrated Threat Control Intrusion prevention system (IPS) Control Plane Policing Flexible Packet Matching Network Foundation Protection Low-Latency Queuing (LLQ) Class-Based Traffic Shaping (CBTS) Class-Based Traffic Policing (CBTP) Class-Based Weighted Random Early Detection (CBWRED) Network-Based Application Recognition (NBAR) Link Fragmentation and Interleaving (LFI) Resource Reservation Protocol (RSVP) RTP Header compression (crtp) Differentiated Services (DiffServ) QoS Preclassify and Pre-fragmentation HQoS Ethernet Operations, Administration, and Maintenance (Ethernet OAM) Ethernet Local Management Interface (Ethernet LMI) Hierarchical QoS (HQoS) Data Sheet IPv6 s IPv6 Multicast s Unified WLAN Management System Specifications IPv6 addressing architecture IPv6 name resolution IPv6 statistics IPv6 translation-transport packets between IPv6-only and IPv4-only endpoints (NAT-PT) ICMPv6 IPv6 DHCP Protocol Independent Multicast (PIM) Sparse Mode PIM Sparse-Dense Mode Auto Route Processing (Auto-RP) Unified access point features: Supported by wireless LAN controller and WCS Configurable local or central switching for HREAP mode Radio management via WCS Seamless roaming with Mobility Groups Table 6 lists the system specifications for the Cisco 880 Series Routers. Table 6. System Specifications Default DRAM Maximum DRAM Specification 256 MB on Cisco 880 Series Data Models 768 MB 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 13

Default and Maximum Flash Memory Specification 128 MB on Cisco 880 Series Data Models WAN LAN Switch 802.11g/n AP based on IEEE 802.11n draft 2.0 standard Console/Auxiliary Port 1 USB 1.1 Port for Advanced Security s Such as Security Tokens, or USB Flash ISDN Basic Rate Interface (BRI) S/T 3G Express Card Modem 2 External Power Supply Inline PoE Fast Ethernet G.SHDSL (2- and 4-wire support) with ISDN backup FE and 3G WAN for CDMA and GSM/UMTS G.SHDSL and 3G WAN for CDMA and GSM/UMTS 3G WAN types supported: CDMA EVDO RevA / EVDO Rel0 / 1xRTT GSM/UMTS HSDPA / UMTS / EDGE / GPRS Optional on all models RJ-45 1 USB 1.1 port on Cisco 881 and Cisco 888 Series USB devices supported: USB etokens USB Managed 4-port 10/100BASE-T with autosensing Media Device In/Media Device Cross Over (MDI/MDX) for autocrossover Flash USB 1.1 port cannot be used for connecting external devices other than those specified at: http://www.cisco.com/en/us/partner/prod/collateral/modules/ps6247/product_data_sh eet0900aecd80232473.htm Available on: Cisco 888 for out-of-band management and dial backup or primary Supports point to point and point-to-multipoint configurations Available on: Cisco 881G for backup or primary Cisco 888G for backup or primary Universal 100 to 240 VAC input; 60W, 12VDC output Optional internal adapter for inline PoE on 2 switch ports for IP phones or external wireless access points, 802.3af compliant and Cisco PoE compliant G.SHDSL Specifications Wireless Specifications Data Rates Supported Maximum Transmit Power (2 Channel Aggregate) 3G Specifications Frequency Bands Physical Dimensions and Weight Conexant Chipset 2-wire and 4-wire modes supported Annex A and Annex B are supported starting with Cisco IOS Software Release 12.4(15)XZ Support for wetting current (Section A.5.3.3 of G.991.2) Support for dying gasp; uses power status bit (Section 7.1.2.5.3 of G.991.2) for signaling Symmetrical WAN speeds of 2.304 Mbps per pair 2.4 GHz 802.11b: 1, 2, 5.5, 6, 9, 11 Mbps 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps 802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, m0-m15 Note: Maximum power setting subject to changes by channel and by region depending on regulations 802.11b 20 dbm 802.11g 17 dbm 802.11n 16 dbm 850/1900 MHz for CDMA 2000 Rev A/ Rev 0 and CDMA 1xRTT 850/1900/2100 MHz for HSPA/UMTS/EDGE/GPRS 900/1800 MHz for EDGE/GPRS Product dimensions: Nonwireless models: W X D X H = 12.8" x 9.8" x 1.9" (325mm x 249mm x 48mm) (includes rubber feet) 2 Availability 2Half Calendar 2008 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 9 of 13

Power Approvals and Compliance Certifications Data Sheet Specification W X D X H = 12.8" x 9.8" x 1.75" (325mm x 249mm x 44mm) (without rubber feet) Wireless models: W X D X H = 12.8" x 10.4" x 1.9" (325mm x 264mm x 48mm) (includes rubber feet) W X D X H = 12.8" x 10.4" x 1.75" [325mm x 264mm x 44mm) (without rubber feet; excludes antennas) Weight: 5.5 lb (2.5 kg) maximum Product power specifications: AC input voltage: 100 to 240 VAC Frequency: 50 to 60 Hz Maximum output power: 60W Output voltages: 12V DC Optional internal PoE with external adapter: Maximum output power: 80W Output voltage external 48V DC IEC 60950-1:2005, Second Edition, with all country deviations AS/NZS 60950-1:2003, First Edition CAN/CSA 22.2 No. 60950-1-05, Second Edition UL 60950-1, Second Edition, 2005 EN55024 Industry Canada CS-03 TIA-968-A, Addendum 1, 2, 3, 4, 5 EMI VCCI Class II IEC 1000-3-2 UNI 3.1/4.0 PVC ITU G.991.2 G.SHDSL California Energy Commission (CEC) Compliant Australia and New Zealand: Australia AS/ACIF S031: 2001 Australia AS/ACIF S043.1: 2003 Australia AS/ACIF S043.2: 2006 New Zealand PTC220: 2003 The following are supported on Enterprise Teleworker Models: AS/NRZ 3548:1992 Class B CFR 47 Part 15 Class B EN60555-2 Class B EN55022 Class B ICES-003, Issue 2, Class B, April 1997S Environmental Operating Range Nonoperating temperature: -4 to 149 F (-20 to 65 C) Nonoperating humidity: 5 to 95 percent relative humidity (noncondensing) Nonoperating altitude: 0 to 15,000 ft (0 to 4570m) Operating temperature: 32 to 104 F (0 to 40 C) Operating humidity: 10 to 85%, relative humidity (noncondensing) Operating altitude: 0 to 10,000 ft (0 to 3000m) DSLAM Interoperability Table 7 lists the Cisco supported Digital Subscriber Line Access Multiplexers (DSLAMs) for the Cisco 888 Series. 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 10 of 13

Table 7. G.SHDSL DSLAM Interoperability DSLAM (Chipset) ECI Hi-Focus SAM 480 (Infineon) Alcatel ASAM7300 (Conexant) Lucent Stinger (Conexant) Siemens Hix-5300 (Infineon) Modes 2-Wire 4-Wire 2-Wire 4-Wire 2-Wire 4-Wire 2-Wire 4-Wire 888 X X X X X X X X Ordering Information Table 8 lists ordering information for the Cisco 880 Series. To place an order, visit the Cisco ordering homepage. Table 8. Part Number Ordering Information Product Name Ethernet CISCO881-K9 CISCO881W-GN-A-K9 CISCO881W-GN-E-K9 CISCO881W-GN-P-K9 Cisco 881 Ethernet Security Router Cisco 881 Ethernet Security Router 802.11n FCC Compliant Cisco 881 Ethernet Security Router 802.11n ETSI Compliant Cisco 881 Ethernet Security Router 802.11n Japan Compliant G.SHDSL CISCO888-K9 CISCO888W-GN-A-K9 CISCO888W-GN-E-K9 Cisco 888 G.SHDSL Router with ISDN backup Cisco 888 G.SHDSL Wireless Router with ISDN backup; 802.11n FCC Compliant Cisco 888 G.SHDSL Wireless Router with ISDN backup; 802.11n ETSI Compliant Enterprise Teleworker CISCO881-K9 CISCO881W-GN-A-K9 CISCO881W-GN-E-K9 CISCO881W-GN-P-K9 Cisco 881 Ethernet Security Router Cisco 881 Ethernet Security Router 802.11n FCC Compliant Cisco 881 Ethernet Security Router 802.11n ETSI Compliant Cisco 881 Ethernet Security Router 802.11n Japan Compliant POE 800-IL-PM=2 2 port 802.3af capable inline power module for 880 routers DRAM MEM8XX-256U512D MEM8XX-256U768D 256-MB DRAM upgrade to 512 MB for Cisco 880 Series Routers 512-MB DRAM upgrade to 768 MB for Cisco 880 Series Routers Router Software C880data-universalk9-mz Universal image for Cisco 880 ISR Data Router Series Access Point Software ap801-k9w7-tar ap801-rcvk9w8-tar Autonomous software image for ap801 LWAPP recovery image for ap801 Software License for Cisco 880 Data SL-880-ADSEC (default) SL-880-AIS (upgrade option) Cisco 880 Advanced Security Image License Cisco 880 Advanced IP Services Image License Security Services Content Filtering SL-CNFIL-88x-1Y(=) SL-CNFIL-8xx-2Y(=) SL-CNFIL-8xx-3Y(=) SL-CNFIL-8xx-TRI(=) One year subscription to Content Filtering for Cisco 881/888 URL/Phishing Two year subscription to Content Filtering for Cisco 881/888 URL/Phishing Three year subscription to Content Filtering for Cisco 881/888 URL/Phishing 30 day free trial license for 88x series SSL 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 11 of 13

Part Number FL-WEBVPN-10-K9(=) Product Name License SSL VPN for Up to 10 Users (incremental) Cisco License Manager is a secure client/server-based application that can be used to manage Cisco IOS Software activation and licenses. For more information about Cisco License Manager, visit http://www.cisco.com/go/clm. Table 9 gives the Cisco IOS Software images for the Cisco 880 Data Series Routers. Table 9. Cisco IOS Software Images for the Cisco 880 Data Series Routers Series Models Image Default License First Cisco IOS Software Release Router Software Cisco 880 ISR Data Series Cisco 881, Cisco 888, Cisco 881G, Cisco 888G C880data-universalk9- mz SL-880-ADSEC 12.4(15)XZ; S880D-UK9-12415XZ Access Point Software ap801 Cisco 881, Cisco 888, Cisco 881G, Cisco 888G ap801-k9w7-tar 12.4(10b)JA2 Cisco Services Leading-edge technology deserves leading-edge support. Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco Services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. Cisco SMARTnet Service technical support for the Cisco 880 Series is available on a one-time or annual contract basis. Support options range from help-desk assistance to proactive, onsite consultation. All support contracts include: Major Cisco IOS Software updates in protocol, security, bandwidth, and feature improvements Full access rights to Cisco.com technical libraries for technical assistance, electronic commerce, and product information 24-hour-a-day access to Cisco s large, dedicated technical support staff For more information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services. For More Information For more information regarding Cisco 880 Series Integrated Services Routers and options, contact your Cisco representative or go to http://www.cisco.com/go/isr. To upgrade the Cisco IOS Software for the Cisco 880 Series Integrated Services Routers, visit the Cisco Software Center. 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 12 of 13

For more information about Cisco products, contact: United States and Canada: 800 553-6387 Europe: +32 2 778 4242 Australia: +61 2 9935 4107 Other: 408 526-7209 Web: http://www.cisco.com Printed in USA C78-459542-00 04/08 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 13