CopyBox Video Lock CD/DVD/BDR Duplicator Manual v. 2.0
Pagina 2 van 5 2009 Virtual Vision
About CopyBox BePRO Video Lock Duplicator 1. Introduction CopyBox BePRO Video Lock duplicator uses a special technology which can mass produce protected DVD video disc by an easy DVD duplicator operation. 2. Playback and Copy Protection Capability of CopyBox Video Lock Playback and Copy Protection capability are two key success factors of a DVD video protection technology. Playback capability Video Lock DVD Video has the same playback capability as a normal DVD-R disc. As long as the DVD-R disc which can playback on a PC or a player, same as the CopyBox Video Lock disc. Copy Protection Capability CopyBox has almost 99% protection capability from a DVD duplicator while it is not 100% protection from a PC duplication. To increase the protection capability from a PC, there are two copy modes to select: PC play Enable and PC play Disable : (Function 4. Setup 4.1 PC play) 1. PC play Enable mode This is the mode to copy a Video Lock disc which can playback on both DVD player and PC. However, it is also weak for PC copy protection compared with PC disable mode. 2. PC play Disable mode To reduce the chance for the Video Lock disc to be copied by a PC, you can select PC play disable mode to make Video Lock disc not able to playback on a PC, only be able to play on a DVD player. 3. How to switch between Normal Non-protect Mode and BePRO Video protection mode 1. The last function is Disable BePRO. If you are in Protection copy mode, you can just press OK onto this function of 7.Disable BePRO to disable Protection copy mode and return back to normal DVD duplicator mode. 2. If you like to change back to Protection copy mode, just go to the last function 13. Enable BePRO to enable BePRO copy function. (Protected Copy Mode) (Normal Duplicator Mode) Press OK 7. Disable BePRO 1. Copy 1. ProCopy Press OK 13. Enable BePRO 4. Reminds (1) ONLY DVD video source can be duplicated become a Video Lock protection disc. (2) CopyBox Video Lock only support DVD-R blank disc for duplication. (3) Auto Load & Copy function can t use in Pro copy mode (enable Pro copy). Pagina 3 van 5 2009 Virtual Vision
5. Main Function List Function Sub-function Description 1. Pro Copy This function can start the Video Lock copy function. 2. Set Burn Speed This option allows you to set the burning speed above DVD 8X. 3. Select Source 4. Utility 5. Setup 6. Image Manager 4.1 PreSan 4.2 Quick erase 4.3 Full erase 4.4 Eject All Disc 4.5 Disc info. 4.6 Drive info. 4.7 system info. 4.8 update BIOS 4.9 copy counter 5.1 PC Play 5.2 Button Beep 5.3 language 6.1 Select Image 6.2 Disc to Image 6.3 Set Reader Speed 6.4 Show Image Info. 6.5 Rename Image If the machine installed with HDD, you can set HDD to be master reading source from this function. This feature helps you to check the master source disc that can be duplicated correctly or not before copy process. This operation can quickly erase data of re-writable disc in the Writer Tray. This operation will completely erase data of re-writable disc in the Writer Tray. It takes longer time than Quick Erase. Eject all discs, including master source disc and all discs in writer trays. This feature will show disc s basic information such as disc type, data length, and available space. This feature will allow you to check the drive s major component information included manufacturer, model number and firmware version etc. This feature can show information of the duplicator system, included controller model number, and software version. This operation will update your duplicator s firmware and reopen it. You need to insert manufacturer s certified update CD first. This operation will record duplicated quantity, and total number of successful and unsuccessful CD/DVD. The default setting of counter is off. There are two copy modes can select in PC Play function: 1. PC play disable 2. PC play enable. You can choose whether to hear a beep when press a button or not. Set system language interface, there are English, Japanese, Spanish and Portuguese for selection. This function will guide you to select Image file source and make copy from HDD to Disc. This function will guide you to load your master source disc onto the Hard Drive and save as an image file. This function will guide you to set the Reading Speed of reading the master source disc. This function allows you to check image file information of Image file number, Disc type, and its file size. This function allows you to rename your image file in 8 characters. 6.6 Delete Image This function allows you to delete image file in HDD. 6.7 Show HDD Info. This function allows you to check the HDD information. 6.8 Format HDD This feature will allow you to format the HDD. 6.9 Load & copy N/A 7. Disable BePRO This function can allows you to return to normal copy function. Pagina 4 van 5 2009 Virtual Vision
Pagina 5 van 5 2009 Virtual Vision