www.cabere.de Established 1922 The Specialist in Drain Cleaning Equipment for over 75 Years Condensed Catalog 2003, 1 Year Warranty E 02.03 with 42-strand Wire Rope Center. It s so tough it carries a one year warranty against defect or breakage!
Drain Cleaning Cables No. 933 No. 932 No. 930 No. 917 Cables for Professional Use Successfully used for decades. Coiled from top quality, patented, hot galvanized spring wire. Double-wound outer wire with opposite-wound inner-core for maximum strength and right amount of flexibility. This cable lasts longer because it resists kinking and breaking! Extremly flexible and strong for small lines with sharp bends - with small claw, piercing ball and adjustable handle Model for pipes Dimensions No. 933 bathtub traps 3mm Dia. in standard lengths of 2m and 3m No. 932 sink traps 5mm Dia. in standard lengths of 1,5 2 3 and 5m No. 930 20-40mm Dia. 7mm Dia. in standard lengths of 2 3 5 8 and 10m No. 917 30-50mm Dia. 8mm Dia. in standard lengths of 3 5 7,5 and 10m No. 916 No. 915 For regular drain lines, available in standard length of 3 5 7,5 10 and 15m, with galvanized steel couplings with 1/2 Ww. thread and protective hand grip. Extension cables are available. Model for pipes Dimensions. No. 916 to 50mm 8mm Dia. with fixed 2-pronged claw of 20mm Dia. and exchangeable crank No. 915 50-70mm 10mm Dia. with exchangeable 3-pronged claw of 40mm Dia. and crank 60-100mm 12mm Dia. with exchangeable 3-pronged claw of 40mm Dia. and crank 100-200mm 15mm Dia. with exchangeable 3-pronged claw of 60mm Dia. and crank For regular drain lines, available in standard lengths of 5 7,5 10 and 15m, with special brass couplings. Extension cables are available. Model for pipes Dimensions No. 920 50-70mm 10mm Dia. with exchangeable 3-pronged claw of 40mm Dia. crank and protective hand grip 60-100mm 12mm Dia. with exchangeable 3-pronged claw of 40mm Dia. crank and protective hand grip 100-200mm 15mm Dia. with exchangeable 3-pronged claw of 60mm Dia. crank and protective hand grip Accessories for Double-Wound Cables Model No. 915 and No. 920 3-pronged claw 30 40 60mm Dia. Retriever 40 50 60 70 80 100mm Dia. Piercing-Ball 25 30mm Dia. Steel Wire Brush 40 50 60 70 80mm Dia. Steel Wire Brush 100 125 150 175 200 250 300mm Dia. Crank 115 140 190mm Coupling 1/2 Ww. thread 3-pronged Boring Head 40 60mm Dia. No. 920 No. 940 Sectional Sewer Rods The rods are made from high quality piano wire of 7 mm Dia., furnished with heavy, acid and corrosive resistant phosphorus bronze couplings (400g!). Designed for use in sewer lines through 600mm Dia. and up to 100m. Sewer Rod Set 20m long: 10 rods of 2m, crank, 3-pronged claw 60mm Dia., Retriever 80mm Dia. and two head connectors Sewer Rod Set 30m long: 10 rods of 3m, crank, 3-pronged claw 60mm Dia., Retriever 80mm Dia. and two head connectors Head connector with claw Head connector with retriever Rods of 2m or 3m with phosphorus bronze couplings
for every Job Do-it-yourself Drain Cleaners For light stoppages in kitchen and bathroom With cable 6,5mm in diameter, in lengths of 4,5m and 7,5m. Including boring head, in breakproof plastic container with thumb screw. Do-it-yourself Cables For light stoppages in kitchen and bathroom 5mm and 8mm Dia.. Made from top quality, patented, hot galvanized spring steel wire. With crank and claw. In lengths of 3m, 5m and 10m. G15 manual operation G16 manual operation or with an electric drill No. 935 Household Cables for semiprofessional use in and around your house. Coiled from top quality, patented, hot galvanized spring wire. The CABERE Display Carton The informative and turnover bringing product presentation for our best-seller*. Wtih crank and claw with two prongs for small lines with many bends. Model for pipes Dimensions No. 934K * Kitchen & Bath 6mm Dia. in standard lengths of 3m and 5m No. 936K * Kitchen, Bath & WC 9mm Dia. in standard lengths of 2 3 5 7, 5 and 10m With exchangeable crank and claw with three prongs, protective hand grip and 1/2 Ww. thread couplings. For all house drains and sewers etc. Model for pipes Dimensions No. 937K * 50-100mm 11mm Dia. in standard length of 5m and 10 m No. 937K 70-125mm 13mm Dia. in standard length of 5m and 10 m Extension cables are available. For accessories see Model No. 915!
The Key to Your Success: Cabere Drain Cleaning Machines s 1 Year Warranty Every drain cleaning machine is only as good as the drain cleaning cable working in the machine. That s why we equip all our drum machines only with the patented Flexikern Wire Rope Center Cables. Heavy gauge wire is coiled tightly around 42-strand wire rope and then heat treated. This cable has unequaled strength and the right amount of flexibility. The left-hand wound spring tightens against the wire rope center when a stoppage is reached, giving you maximum strength when the going is toughest. The Flexikern Cable is so tough it has a one year warranty against defect or breakage. Drain Cleaners G30 and G35 Handy G30 and G35 drain cleaners are for one man operation for drains up to 75 mm Dia. Patented collet chuck tightens firmly on cable with just a quarter turn. Durable steel container can hold up to 15 m cable. Container is treated for corrosion resistance. The G30 has a fixed crank handle which guarantees a constant and powerful manual operation. The G35 is equipped with a removable crank handle. So you can take off the crank handle and attach the container to an electronic variable speed drill for faster drain cleaning. G30-1 for pipes to 50mm Dia. 7mm Dia. x 7,5m with Basin Plug Head Code 50301 G30-3 10mm Dia. x 7,5m with female connector and Boring Gimlet 30mm Code 50303 G35-2 for pipes to 50mm Dia. 8mm Dia. x 7,5m with Basin Plug Head Code 50352 G35-4 10mm Dia. x 10,5m with female connector and Boring Gimlet 30mm Code 50354 Telescoping Toilet Auger The Telescoping Toilet Auger G38 is specifically for the difficult job of removing solid objects from blocked toilets. After working the first 90cm into a toilet bowl or gully there is a further equal length of cable telescoped inside the guide tube operated by pressing a button and pulling back the crank handle. Other features are: Double spring Flexikern Cable, vinyl bowl guard to avoid scratching WC bowls, vinyl grip handle with Grip Clip for attaching cable. Toilet Auger G38 w/double Spring Cable 13mm Dia. x 180 cm with retrieving head Code 50180 G40-1 10mm Dia. x 15m with connectors and Boring Gimlet 30mm Code 50401 Drain Cleaners G40 and G50 G40-4 13mm Dia. x 15m with connectors and U-Cutters 40mm and 50mm Code 50404 Wtih these handy units for one man operation you clear clogged drain lines up through 100 mm Dia.. The large crank handle on the back of the drum gives you powerful leverage, and after a couple of turns, you have the speed and momentum to break through a stubborn stoppage. Model G40 has a convenient carrying handle on the drum for easier portability. The G50 is equipped with a sturdy chassis. So you can roll the G50 to the job easily, even over long distances. G50-2 13mm Dia. x 23m with connectors and U-Cutters 40mm and 50mm Code 50502 G50-3 13mm Dia. x 30,5m with connectors and U-Cutters 40mm and 50mm Code 50503
Cabere Machines with Electric Motor remove stoppages quick and efficient. Small Drain Specialist For kitchen, bathroom, laundry drains, and G75The lines up through 75mm in diameter. The G75 has a patented Slide-Action Chuck built right into the grip shield. Just slide it backward to grip the cable; forward to release it. Automatically adjusts for different size cables. G75 Set 1 for pipes 20-75mm Dia. s 7mm Dia. x 7,5m, 10mm Dia. x 7,5m and 5-Piece Cutter Set G75 Set 2 for pipes 20-50mm Dia. 7mm Dia. x 7,5m with Basin Plug Head Power Cable Feed, great in tight spots. To feed the cable, just start the G80 and G80With squeeze the lever. To retract it, reverse the motor and squeeze the lever. The feed handles 7, 8 and 10 mm Dia. cables. Like the G75, the G80 has quick loading cable cartridges, so it s easy to change to a different cable diameter. G80 Set 1 for pipes 20-75mm Dia. s 7mm Dia. x 7,5m, 10mm Dia. x 10,5 m, 5-Piece Cutter Set Set 2 for pipes 40-50mm Dia. 8mm Dia. x 7,5m, and 5-Piece Cutter Set Code 50751 All G75 Sets include a Carrying Case. Code 50752 Code 50801 Code 50802 All G80 Sets include a Carrying Case. The G75, the G80 and the G88 have a quick-change cartridge system that allows you to switch to different diameter cables without pulling the old cable out of the drum. Clean Machine. Equipped with a variable speed power feed and variable speed motor, the G88 makes drain cleaning jobs easier and faster. It feeds and G88The retrieves the cable at up to 4,8 m per minute and a 120 cm long guide hose eliminates cable whipping, dirty fixtures and messy floors. The drum speed can be varied by changing the pressure on the foot pedal, making it easier to thread the boring head through strainers and crossbars. Great for long jobs or when working in cramped areas, the G88 can be operated in both vertical and horizontal positions to get closer to the drain opening. G88 Set 1 for pipes 20-75mm Dia. s 7mm Dia. x15m, 10mm Dia. x 10,5m, 5-Piece Cutter Set G88 Set 2 for pipes 40-50mm Dia. s 8mm Dia. x15m, and 5-Piece Cutter Set G88 Set 3 for pipes 50-75mm Dia. s 10mm Dia. x 10,5m, and 5-Piece Cutter Set Code 50881 Code 50882 Code 50883 You Light Weight with a Long Reach. With 23 m cable and a 1/3 hp motor with pneumatic foot pedal, the inexpensive G95 clears lines from roof G95Gives top to basement. You can remove the drum in seconds for more portability or to switch to a different diameter cable with no mess and no lost time. G95 Set 1 10mm Dia. x 15m G95 Set 2 10mm Dia. x 23m G95 Set 3 13mm Dia. x 15m G95 Set 4 13mm Dia. x 23m Code 50951 Code 50952 Code 50953 Code 50954 All G95 Sets include a 4-Piece Cutter Set. Optional: Power Cable Feed and Mini-Drum for 7 and 8mm cables.
The Specialist in Drain Cleaning Equipment for over 75 Years Portability and a Power Cable Feed. This machine gives you all the G95 features and more. The G100 keeps the weight on the ground and G100Extra maximizes mobility with 200 mm semi-pneumatic wheels. The handle folds down to save space and locks to use as an additional lifting handle. A variable speed Power Cable Feed attachment makes feeding and retrieving the cable much easier. It quickly adjusts between 10 and 13 mm Dia. cables without the need for tools. The drum comfortably holds 23 m of 10 or 13 mm cable and features a free floating inner drum with an integral distributor tube to help prevent cable tangling under load. A pneumatic foot switch with no wiring between pedal and motor operates the 1/3 hp electric motor with capacitor start. For small drain work, you can order a special Mini-Drum for handling 7 or 8 mm Dia. x 15 m cabes. G100 Set 1 10mm Dia. x 15m, 4-Piece Cutter Set, Spring Guide Tube Code 51001 G100 Set 2 10mm Dia. x 23m, 4-Piece Cutter Set, Spring Guide Tube Code 51002 G100 Set 3 13mm Dia. x 15m, 4-Piece Cutter Set, Spring Guide Tube Code 51003 G100 Set 4 13mm Dia. x 23m, 4-Piece Cutter Set, Spring Guide Tube Code 51004 G130For Inside Jobs with a 30,5 Meter Capacity! Big 200 mm wheels and a tall handle make this an easy machine to move around. Drum holds 30,5 m of 13 mm Flexikern Cable that s tough enough to clear stoppages even in 100 mm Dia. drain lines. The wheel brake locks the G130 in position on the job. A Power Cable Feed attachment with Spring Guide Tube gives you an easy way to feed 10 or 13 mm Dia. cables, driving them into the line and retracting them without reversing the motor rotation. The G130 has a capacitor start 1/3 hp motor with overload protection and an air activated foot pedal. Other features include a tough but lightweight tubular frame, a folding handle with loading wheel, a quickly and easily removable drum and an optional Slide-On Container for handling 7 and 8 mm Dia. cables. G130 Set 1 13mm Dia. x 23m, 8-Piece Cutter Set, Spring Guide Tube Code 51301 G130 Set 2 13mm Dia. x 30,5m, 8-Piece Cutter Set, Spring Guide Tube Code 51302 G130 Set 3 10mm Dia. x 23m, 8-Piece Cutter Set, Spring Guide Tube Code 51303
m x 20 mm Capacity; Portable and Versatile. The G250 has root cutting power plus the ability to do small drain work. The machines uses G25030,5 two different size drums, one with 20 or 16 mm Dia. cable and one with 13 mm Dia. cable, enabling it to handle 50 through 250 mm Dia. lines. Capacity of large drum is 30,5 m of 20 mm or 16 mm Dia. cable. It has a see-through inner drum cage that prevents cable tangling under load, while enabling the operator to see how much cable is left in the drum. For safety, the G250 has a pneumatic foot pedal with no electric contact between the pedal and motor. Power Cable Feed takes most of the muscle work out of drain cleaning because it has the pulling power to get your cable out of the line, even on long, tough jobs. Other features: strong 1/2 hp electric motor with capacitor start and overload protection, V-belt stair climbers, 250 mm ball bearing wheels with brake, a truck loading wheel and a tool box. G250 Set 1 for pipes 50-250mm Dia. G250 Set 2 for pipes 100-250mm Dia. 20mm Dia. x 30,5m and Flexikerrn Cable 13mm Dia. x 30,5m 20mm Dia. x 23m, in Small Drum, 13 Cutters, Spring Guide 8 Cutters, Spring Guide Tube Tube G250 Set 3 for pipes 100-250mm Dia. 20mm Dia. x 30,5m, 8 Cutters, Spring Guide Tube G250 Set 4 for pipes 75-150mm Dia. 16mm Dia. x 30,5m, 8 Cutters, Spring Guide Tube Code 52501 Code 52502 Code 52503 Code 52504 G300A Big Capacity, Heavy Duty Machine. The G300 combines root cutting power and big capacity in a surprisingly portable machine. The machine holds 38 m of 20 mm or 45,5 m of 16 mm Dia. cable and can drive a lot more. Clears roots, grease, sand and scale from sewers. An inner drum prevents cable tangling but allows you to see how much cable is left in the drum. Air footswitch operates a heavyduty 3/4 hp electric motor with capacitor start and overload protection. Motor swivels out of the way for easy drum removal. Power Cable Feed drives or retracts cable at any speed you want from zero to six meter per minute by moving control handle up and down - without having to reverse motor rotation. A Spring Guide Tube safely guides the cable into drain opening and reduces cable whipping and drag. The G300 has a surprisingly slim 59 cm profile that lets you work in some very tight spots. The frame is tough but light aluminium alloy. Machine rolls on big 250 mm ball bearing wheels. The wheel brake locks machine in place on the job. Standard equipment includes V-belt stair climbers, lift handles on front leg of machine, built-in tool box and truck loading wheel. G300 Set 1 for pipes 100-250mm Dia. 20mm Dia. x 38m, 8-Piece Cutter Set, Spring Guide Tube Code 53001 G300 Set 2 for pipes 75-150mm Dia. 16mm Dia. x 45,5m, 8-Piece Cutter Set, Spring Guide Tube Code 53002 G145 Pro Set Machine with Rear Guide Hose, Leather Gloves, Small Drum 8mm Dia. x 7,5m with Basin Plug Head, Sectional Cables and Cutters with T Slot Couplings: 6 Sections 16mm Dia. x 2,3m in Cable Carrier and 5-Piece Cutter Set 16mm, 5 Sections 22mm Dia. x 4,6m in Cable Carrier and 6-Piece Cutter Set 22mm Code 51451 Three Machines in One. Here s a sectional cable machine that drives 22 and 16 mm Dia. Sectional Cables - or G145It s even 7, 8 or 10 mm Flexikern Cables for small drain work. You switch from 22 to 16 mm and back by repositioning the chuck cone. No adapter required. Attach a small drum to the back of the machine to drive smaller cables. The G145 gives power and convenience. The motor is a 1/3 hp capacitor type, so it delivers plenty of torque to the cables. Yet, as soon as you lift the drive handle, the cable stops rotating, so there s no additional torque build up. You also use the drive handle to carry the machine. And when it s in position on the job, its four point base gives it rock-solid stability. A cutter holder is attached to the back of the G145, so your cutting heads are always with the machine. 1 Year Warranty with 42-strand Wire Rope Center. It s so tough it carries a one year warranty against defect or breakage!
Picks up everything...from a Cent...to a brick. You ll find dozens of uses for this labor-saver, like cleaning traps and manholes of rocks and debris or grabbing objects from hard to get at places. The locking trigger feature lets you grab and lock on to objects without further trigger pressure. Two thermal plastic rubber caps open 11,5 cm to grip nearly anything. Pipe Inspection/ Location System G5000 Don t just tell your customer he s got a problem...show him! EasyRetriever...extends your reach When you have a G5000 Pipe Inspection/Location System, you ll know what the problem is, where it is, and how deep to dig. Use the G5000 for in-line inspection and preventative maintenance of sewer and drain lines, septic tanks, heating and cooling ducts, crawl spaces, chimneys, attics, wells, and much more. The G5000 System has everything you need to trouble shoot 38 mm through 300 mm lines. The System is made of the toughest components, like a stainless steel camera, Kevlar reinforced push rod, AC/DC switchable, color VCR/Monitor in a padded fan cooled case. A digital locator that tells you how deep the pipe problem is with the push of a button - no triangulation required. It can keep your costs down, your quotes competitive, and your customers happy. A picture could be worth a thousand Euros. Please ask for our detailed brochure G5000! This tool is available in lengths of: 80cm 100cm 150cm 185cm 250cm - 300cm Kinetic Water Ram Opens Clogged Drains with Shock Action! The Kinetic Water Ram uses a burst of compressed air to create a shock wave (kinetic energy) that travels through water to break up a stoppage. It quickly opens clogged sinks, toilets and tubs; handles rust, grease, and scale in lines up through 100 mm in diameter. The Ram has a self contained pump and pressure gauge, so you can hit the blockage with just the right amount of force. You get instant impact with no pressure build-up. Kinetic Water Ram complete with extension hose, 100mm Dia. rubber cone, five rubber plugs and carrying case Code 50150 Speciifications within the catalog are subject to alteration without notice. High-Pressure Water Jetting Machines CABERE s water jets are ideal for clearing soft stoppages and ice from drain lines. They use a stream of high-pressure water that hits the stoppage and flushes it away. The thrust of the jet nozzles drives the hose down the line and gives you wall-to-wall pipe cleaning action. Our Vibra-Pulse feature breaks the tension between the surface of the hose and the pipe walls, helping the hose slide around tight bends and propel itself farther down the line. Vibra-Pulse increases the cleaning power of low pressure electric jet machines, and is particulary useful in jetting around bends in small drain lines. All our jets come complete and ready to operate: G1450 G1450 Electric Jet Unit with 230 V electric motor 1.1/2 hp, 105 bar, 7 l/min. Triplex pump with Vibra-Pulse, slide out handle, 61m capacity detachable hose reel equipped with jet hose 1/4 x 45m for pipes to 100mm, with 4-piece jet nozzle set and Superflex jet hose 1/8 x 9m attachable to the pump outlet, with 4-piece jet nozzle set for small pipes with sharp bends. Code 56145 Both units include: pressure gauge, Foot Pedal Safety shut-off valve, thermal relief valve,14-piece nozzle cleaning tool and rubber gloves. Carl Beck Manufacturing Company The Specialist in Drain Cleaning Equipment P. O. Box 1206 D-42905 Wermelskirchen Handelsstrasse 3 D-42929 Wermelskirchen G2900 G2900 Gas Jet with 11 hp Honda engine, 207 bar, 15,1 l/min. Triplex pump with Vibra-Pulse, 91m capacity hose reel equipped with jet hose 3/8 x 61m for pipes to 200mm, with 4-piece nozzle set Code 56290 Tel. ++49 (0 ) 2196/33 92 Fax ++49 (0 ) 2196/15 47 info@cabere.de www.cabere.de copyright by www.cabere.de