Description HDBaseT technology is a consumer electronic (CE) connectivity technology optimized for whole-home and commercial multimedia distribution. HDBaseT can connect all the entertainment devices in a setting through its 5Play feature set, converging uncompressed full HD digital video, audio, 100BaseT Ethernet, power over cable and various control signals through a single 100m/328ft CAT5e/6 cable with RJ45 connectors. The HDBaseT Extender uses one CAT-6 cable to extend 1080p Full HD video and audio over 100meters away from its HDMI or DVI-D source. Features Enables 10.2 Gbps of HDMI 1.4 (including HDCP) over a single 100m/328ft Cat-6 cable. Full HD support: 1080p@60Hz@48b/pixels, 3D and 4K*2K. Uses HDBaseT Technology. Application Blu-ray, DVD players and recorders DTVs, LCDs and plasma displays Rear and front projectors Application Note DVD Player TV HDMI cable HDMI cable CAT-6 LAN Cable 100 meters Page 1 of 5
Ordering information Part Number HDBT100-XX 00: US Plug for AC adaptor 01: EU Plug for AC adaptor 02: BS Plug for AC adaptor 03: AU Plug for AC adaptor Package include TX module 1 RX module 1 5V adapter 2 Optional:HDMI cable EU/BS/AU Plug converter of 5V adapter Specification PARAMETER SPECIFICATION NOTE Max length 100M Max resolution 1920 1080p Single link TMDS maximum serial data rate TMDS output clock frequency HDCP compliant CEC compliant Link connector Recommended Cable Operating voltage 3.4 Gbps per channel 25 to 340 MHz YES YES RJ45 connectors CAT-6 DC 5V TX: 10W Electrical Power consumption RX: 10W Operating Temperature -10 to 50 Storage Temperatute -20 to 75 5V/2A (Max.) 5V/2A (Max.) Dimension 141 72.4 32 L W H (mm) Weight 255g TX unit or RX unit Page 2 of 5
Requirements HDMI Source (DVD player or PC) HDMI Sink (LCD TV or Projector) 100~240VAC 50~60Hz 2A electricity Adapter Specification PARAMETER SPECIFICATION NOTE Input 100~240VAC US plug Output DC 5V 2.0 A DC Jack Inside 5V / Outside ground US Plug EU Plug BS Plug AU Plug Page 3 of 5
HDCP compliant HDCP (High-bandwidth Digital Content Protection) is one kind of copy protection by digital signal handshake. It is required for HDMI device. The Extender plays the role of a cable to communicate all of HDMI functions, such as all TMDS, DDC, CEC and HPD signal. Installation Step1. Put TX module near to HDMI signal source, such as DVD players or computers. Step2. Put RX module is near to HDMI sink, such as LCD TVs or Projectors. Step3. Connect HDMI cable from TX to input and from RX to output. Step4. Plug in the CAT-6 cable from TX to RX. Step5. Apply 5V adaptor to TX/RX modules. Note 1: The length of HDMI cable should be NOT longer than 2 meters. Note 2: These four indicator in front of the modules represent linking status. These 4 LEDs blaze green if all setup is complete and correct. The left one stands for the connection of power. The second light stands for the device operation. The third light stands for the connection of HDBaseT active. The right one stands for the HDMI Content of HDCP encryption. Page 4 of 5
Dimensions HDBaseT HDMI Power Input 32.0 30.0 72.4 141.0 HDBaseT TX HDBaseT HDMI Power Output 32.0 30.0 72.4 141.0 HDBaseT RX All dimensions all in +/- 0.3mm tolerance if no specified Unit:mm Safety Regulation CE and FCC approved. Page 5 of 5