Tele-monitoring as a medical application of Ubiquitous Computing



Similar documents
Mobile Gateways for Medical Applications

Mobile and Sensor Systems

Summer projects for Dept. of IT students in the summer 2015

Chapter 17: M2M-Based Metropolitan Platform for IMS-Enabled Road Traffic Management in IoT

THE CONCEPTS OF AN END-USER-ENABLING ARCHITECTURE FOR UBIQUITOUS COMPUTING. Irene Mavrommati, Achilles Kameas 1

WAITER: A Wearable Personal Healthcare and Emergency Aid System

A Study of the Design of Wireless Medical Sensor Network based u- Healthcare System

Wi-Fi, Bluetooth, and the Internet of Things

The Personal Medical Unit A Ubiquitous Computing Infrastructure for Personal Pervasive Healthcare

Cloud Development of Medical Systems By Oleg Kruk, Embedded Research Lab Leader, DataArt

IST STREP Project. Deliverable D3.3.1u Middleware User s Guide Multi-Radio Device Management Layer.

Key factors for personal health monitoring and diagnosis devices

Overview of the Internet of things

Wireless Multimedia Technologies for Assisted Living

Remote Monitoring and Controlling System Based on ZigBee Networks

MobiHealth 1 : Mobile Healthcare

MOBILE PHONE APPLICATION TO SUPPORT THE ELDERLY

Mobile Commerce and Ubiquitous Computing. Chapter 6

SYLLABUSES FOR THE DEGREE OF MASTER OF SCIENCE IN COMPUTER SCIENCE (applicable to students admitted in the academic year and thereafter)

A Middleware-Based Approach to Mobile Web Services

IoT Prospects of Worldwide Development and Current Global Circumstances

Current and Future Research into Network Security Prof. Madjid Merabti

ENHANCING MOBILE PEER-TO-PEER ENVIRONMENT WITH NEIGHBORHOOD INFORMATION

DATA SECURITY 1/12. Copyright Nokia Corporation All rights reserved. Ver. 1.0

Building Motion and Noise Detector Networks from Mobile Phones

Study of Wireless Sensor Networks and their application for Personal Health Monitoring. Abstract

What is Industrie 4.0 and how will it create the new growth?

Ubiquitous Computing Applications: Healthcare & Smart Homes. Emmanuel Agu

This KnowledgeShare document addresses the main types of wireless networking today based on the IEEE standard.

Wireless Technologies for Automation

At least 2 GCE A Level Passes and credit in Mathematics at Ordinary level. Mature candidates will also be considered on a case-by-case basis.

Towards an Organic Middleware for the Smart Doorplate Project

Cellular Wireless technology: Creating a link between people and the healthcare community

Technology offer: Machine-to-Cloud Management System of Distributed Heterogeneous Devices

Industrie 4.0. Towards a Holistic Approach for Cyber Safety and Security

A Web Access to Data in a Mobile ECG Monitoring System 1

Towards Distributed Service Platform for Extending Enterprise Applications to Mobile Computing Domain

Ubiquitous Healthcare Monitor System Using Wearable Wireless Sensor Network

Challenges. Department of Informatics University of Oslo. Presenter. October 25, 2011

CS 5840 Englischsprachiges Seminar Topic: Ambient Computing SS 2014

MAGPIE: An Agent Platform for the Development of Mobile Applications for Pervasive Healthcare

NanopowerCommunications: Enabling the Internet of Things OBJECTS TALK

REROUTING VOICE OVER IP CALLS BASED IN QOS

Electrocardiogram (ECG) Monitoring System using Bluetooth technology

The shortest path to cellular communications: Cellular Development Platform

ANDROID APPLICATION DEVELOPMENT FOR ENVIRONMENT MONITORING USING SMART PHONES

The Device Service Bus: A Solution for Embedded Device Integration through Web Services

CHAPTER 6. VOICE COMMUNICATION OVER HYBRID MANETs

Eliminating the Communication Black Spots in Future Disaster Recovery Networks

Using Smart Phones and Body Sensors to Deliver Pervasive Mobile Personal Healthcare

WIND RIVER INTELLIGENT DEVICE PLATFORM XT

Intelligent Mobile Health Monitoring System (IMHMS)

All modules are assessed through examination (0%-100%) and/or coursework assessment (0%- 100%).

Internet of Things. Hafedh Yahmadi LOGO

in Health Care and Sensor Networks

Ad hoc and Sensor Networks Chapter 1: Motivation & Applications

The Ubiquitous Web, UPnP and Smart Homes

K 066/921. Master Curriculum. Computer Science. (in English)

Fig. 1 BAN Architecture III. ATMEL BOARD

Protocols and Architectures for Wireless Sensor Netwoks. by Holger Karl and Andreas Willig

Complete Security One Powerful Solution. GV4 Series integrated security, fire and access control panels D7212GV4, D7412GV4, D9412GV4

WI-FI VS. BLUETOOTH TWO OUTSTANDING RADIO TECHNOLOGIES FOR DEDICATED PAYMENT APPLICATION

UNIVERSITY OF INFINITE AMBITIONS. MASTER OF SCIENCE COMPUTER SCIENCE DATA SCIENCE AND SMART SERVICES

Design and Implementation of an Integrated Contextual Data Management Platform for Context-Aware Applications

Contents. Chapter 1. Introduction

Bluetooth Health Device Profile and the IEEE Medical Device Frame Work

Future Directions for Internet of Things Work

Plc Based Monitoring and Controlling System Using Wi-Fi Device

oncaring onall tech

1. PUBLISHABLE SUMMARY

Vision for the Cohort and the Precision Medicine Initiative Francis S. Collins, M.D., Ph.D. Director, National Institutes of Health Precision

An Open Platform for Digitizing Real World through Sentient Artefact Model. Fahim Kawsar Waseda University, Japan

Pervasive Computing. (A Very Short Introduction)

Internet of Things for Smart Crime Detection

Review of MANETS Using Distributed Public-key Cryptography

Task-based Self-Organization in Large Smart Spaces: Issues and Challenges 1

H MICRO CASE STUDY. Device API + IPC mechanism. Electrical and Functional characterization of HMicro s ECG patch

Enabling Integrated Care

Remote Management White Paper 27th June, 2012

Beyond Retail: The Imperative for Ubiquitous Security in Wireless Printers

RESEARCH OF IOT CONCEPT IN MONITORING THE ACTIVITIES OF THE ELDERLY PERSON

Index Terms: Internet of Things (IoT), IPv6, IPv4, RFID, Machine to Machine Communication, WSN Network.

Component 4: Introduction to Information and Computer Science. Topic III: Cloud Computing. Distributed computing

Nomadic Positioning Services for a Mobile Services Platform

CMPE 80U Ubiquitous and Mobile Computing

M 2 M IWG. Eclipse, M2M and the Internet of Things. Overview. M 2 M Industry WorkGroup! M2M?

MSc Computer Science with specialisation in either Distributed Systems & Multimedia or Software Engineering - E526

Design of Home Automation Framework With Social Network Integration

Wireless Networking for Small Businesses, Branches and Home Offices

Wireless bedside Vital Signs monitoring unit

icare: A Mobile Health Monitoring System for the Elderly

Enterprise Application Enablement for the Internet of Things

Design and Performance Analysis of Building Monitoring System with Wireless Sensor Networks

REGULATIONS FOR THE DEGREE OF MASTER OF SCIENCE IN COMPUTER SCIENCE (MSc[CompSc])

Ubiquitous Computing: Making It a Reality

Call for Proposal: Internet-of-Things (IoT) for Intelligent Buildings and Transportation

Some Specific Parawise Suggestinons. 2. An application which collects and analyzes this data for further consolidation and,

A Survey of Cloud Based Health Care System

Evolution of Information Society. after the Mobile Information Society. the emergence of Personal Information Services

Designing a Smart Multisensor framework based on Beaglebone Black board

Transcription:

Tele-monitoring as a medical application of Ubiquitous Computing C. Kunze, W. Stork, K.D. Müller-Glaser Institut für Technik der Informationsverarbeitung Universität Karlsruhe Engesserstr. 5 76128 Karlsruhe kunze@itiv.uni-karlsruhe.de Abstract: In this paper we present why tele-monitoring is a promising application domain for Ubiquitous Computing. We discuss how the characteristics of ubiquitous information systems can be applied in the design of tele-monitoring applications and what special conditions and problems have to be regarded. Finally, we present the results of the implementation of such an application realized in a joint research project. 1. Introduction Ubiquitous Computing (UC) [Wei91] deals with future scenarios of information technology utilization. It considers computing environments, where the user is surrounded by a large amount of application-specific, networking information appliances. In order to improve user friendliness, ubiquitous computing systems have to be unobtrusively embedded into their environment 16. A common problem of UC-research, is the transfer of the theoretical concepts into usable applications. Challenges remain in deploying Ubiquitous Computing System, like technical complexity, privacy and security. Problems also arise with respect to economic factors when developing UC products. According to [DaGe02], we are still many years from creating real ubiquitous systems deployed to the extend that they become an integrated part of our everyday lives. There is, however, at present significant potential in integrating and applying UC techniques to medical applications such as health monitoring. The UC techniques listed below, highlight the distinct medical advantages and high potential for cost savings when theory is applied effectively: Patient mobility is maximized by physically embedding the devices into distributed wearable or implantable systems Networking allows the ubiqutious provision of high performance services, such as pattern recognition with neural networks. Thus, decentralization is compensated. 16 The following two terms: the disappearing computer and augmented reality are often used in this context 115

A better usability is achieved through context-aware, cognitive-embedded systems. This is essential for the use in a home-monitoring scenario ( where devices adapt themselves to the user and not vice-versa). In this paper we discuss the key technologies and the challenges that exist with the application of UC in tele-monitoring systems. Figure 1: system concept for the PHMon project 2. Materials und methods We tried to apply the concepts of ubiquitous computing systems (cognitive and physical embedded systems, ad-hoc networking and spontaneous interoperation, integration in a global information base, context-awareness) with the development of a home-monitoring system as part of the PHMon research project (see figure 1) [KSM02]. Therefore, special requirements of mobile vital monitoring applications have to be considered. These include: Miniaturization and low power consumption to ensure mobility Intuitive, context-aware user-interfaces to enable usability for diseased and elderly people 116

Special security requirements to preserve privacy due to the sensibility of patient data A reliable home-monitoring system fulfilling the requirements mentioned above can only be achieved using a combination of the latest technologies. In the following section we explain key technologies considered in this work. 2.1 Micro-technical smart sensors Today, many vital signs can barely be collected with wearable sensors. Therefore, new measurement principles allowing a micro-technical implementation have to be developed. Micro-technical sensors have several advantages: They enable high integration with low power consumption, and thus high patient mobility. The costeffective realisation allows the product to be manufactured in mass numbers. 2.2 Mobile & Wearable Computing Personalized mobile information systems can be developed with high usability in mind, if they are especially adapted to an application with custom hardware and software functions, like for example in logistics information systems. This also applies to mobile health-monitoring applications. To fulfil requirements concerning reliability and security, certain adaptations have to be implemented [Stan02]. Attention must also be turned on easy handling of the system to avoid mistakes being committed by the patient. Since mobile information devices are subject to very short product life-cycles, a deviceindependent software design is very important for the development of such mobile computing applications.at ITIV we are testing different mobile computing platforms (Linux, Symbian OS, JAVA MIDP) for their suitability for health-monitoring applications. We are using handheld devices acting as the personal health assistant as the mobile base-station in the PHMon-project. 2.3 Wireless Communications (especially Bluetooth and GSM/UMTS) The widespread availability of wireless cellular networks provides a basis for mobile telemetry applications. The new packet-oriented cellular phone standards (GPRS, UMTS) are charged in a pay-per-volume model. Thus, a monitoring device can always be connected without generating high costs, because the data transfer rates are very low in vital-monitoring applications compared to e.g. multimedia transmissions. Future cellular network systems will also provide enhanced localization possibilities (e.g. E- OTD, OTDOA, A-GPS). This is very important for emergency localization in patient monitoring applications. 117

Figure 2: Prototype of an ECG-Sensor with Bluetooth-Interface Several technologies can be taken into account for body area and personal area networking (BAN/PAN). Wired connection should only be used if they are not restricting the patient s mobility, like in smart clothes with embedded components and wires. We are preferring Bluetooth as wireless communication technology because of its ad-hoc-networking abilities and its extensive integrated functionality, such as service discovery, power management, encryption and authentification. Besides from ad-hoc networking technologies, an automatic vital-monitoring also requires powerful open communication protocols enabling spontaneous interoperability between different medical information systems. 2.4 Web-based Electronic Patient Record (EPR) In order to reduce the costs of public health systems using home-monitoring technology, the collected vital data must be automatically shared with the heterogeneous information systems (for example clinical information systems). This is difficult due to a lack of set application-level communication standards. This situation can only be changed by a broad cooperation of the concerned institutions and system developers. An approach to overcome this problem is to use a patient-centred web-based EPR system, so that information can be easily accessed through a secure internet connection. 3. Results A demonstrator has been developed to evaluate the concepts of the personal health monitoring system. It consists of wearable and external sensors with integrated signal processing and communication abilities, where a PDA acts as mobile base station and a Bluetooth-enabled mobile phone allows for Internet connections. The Internet connection is used to directly transmit the measured vital signs into a web-based EPR. For a first scenario, we used a wearable multi-channel ECG-sensor and a weight scale as well as a blood-pressure monitoring device as external sensors. This setup may be used for the monitoring of patients suffering from cardiovascular disease, where the regular 118

measurement of the vital signs enables a better control of the therapy and early recognition of complications. All the sensors were equipped with a Bluetooth-Interface for wireless transmission of the vital-signs to the PDA. To minimize manual Bluetooth configuration effort, we developed a special self-configurating application protocol with integrated connection and security management functions. Figure 2: Telemonitoring-application based on Bluetooth-Communication Over the next few years, most of the mobile phones will likely be programmable and have an integrated Bluetooth-Interface. Since most of the patients in industrial countries possess a mobile phone, the realization of flexible tele-monitoring applications such as the one described in this paper will be much more competitive than today. Future systems will only consist of appropriate sensors with communication abilities and software components for personal mobile devices. Sensor manufacturers can easily integrate their products into such a telematic platform. To facilitate this task, we developed hard- and software components enabling the integration of the necessary communication abilities in existent systems. Using these components, we plan to adapt several available sensors, such as those used for glucose monitoring, tonometry, body temperature measurement, and more, to our platform in order to build an array of sensors for the diagnosis and monitoring of different diseases. 119

4. Discussion Using this system prototype we want to evaluate the concepts of ubiquitous computing (embedding, networking, context-awareness) in patient-monitoring applications. Future work will focus on the development of powerful self-configuration application protocols for spontaneous interoperation, on context-aware user interfaces and also on further integration of the systems. The latter includes miniaturization of ubiquitous sensors and integration of such medical sensor into everyday objects and smart clothes. In the next few months we will start a study of our tele-monitoring system. In this study, we will evaluate the home-monitoring of heart-failure patients in order to gain experience on the practical use of the system. Besides from tele-monitoring of high-risk patients the system may also be used in elderly-care applications, where for example a sudden fall sensor con be combined with and an emergency button and a location system. References [Wei91] Weiser, M.: The computer for the 21st century, Scientific American, vol. 265, no. 3, 1991, S. 94-104. [DG02] Davies, N; Gellersen, H.W.: Beyond Prototypes: Challenges in Deploying Ubiquitous Systems, IEEE Pervasive Computing, vol. 1, no. 1, 2002, S. 26-34 [KSM02] Kunze, C.; Stork, W; Müller-Glaser, K.D.: Personal Health Monitoring: Chancen, Technologien und Herausforderungen im Home-Monitoring. In (Jäckel, Hrsg.): Telemedizinführer Deutschland, Ober-Mörlen, Ausgabe 2003, S. 78-81 [Sta02] Stanford, V.: Pervasive Health Care Applications Face Tough Security Challenges, IEEE Pervasive Computing, vol. 1, no. 2, 2002, S. 8-13 120