Cost-effective Technology for a Competitive Advantage Unlike most other professional audio applications, the challenge of cinema sound system design comes not from the acoustics of the exhibition space but from the program material itself: digitally mixed and encoded soundtracks. Today s soundtracks have a wider dynamic range, require higher fidelity, and their multiple-channel digital mixes require three different types of loudspeakers each optimized to its particular application. Main channel stage/screen loudspeakers must reproduce dialog, full range music and sound effects with equal power and clarity. Where surround channel loudspeakers once played only an ambient role, today they are asked to reproduce nearly as much information as the main channels. And subwoofers are pushed to the limits of human hearing with thunderous sound effects at sometimes earth-shaking volume levels. With Digital Cinema, the future requirements of the entire cinema sound system may be totally re-defined. Finally, all of these loudspeakers must be contained in cost effective systems capable of performing at or near peak output for 12 hours a day or more. Seven days a week. For years and years. In response to these demands, EAW has focused its total system engineering approach on the problems of cinema sound and has become a major supplier of cinema loudspeaker systems. By studying how a loudspeaker will be used, EAW Engineering has created a comprehensive line of cinema loudspeakers that are easy to install and use, offering cinema exhibitors cost-effective technology for a competitive advantage. 1804 / 06.00
CINEMA S YSTEMS THREE-WAY SCREEN SYSTEMS C S C 9 2 3 X The CSC923 full-range screen channel loudspeaker system brings 3-way design to the largest cinema exhibition spaces. This system provides extremely high output and must be powered by a minimum of three amplifier channels (triamplification). The CSC923 has been approved by the THX division of Lucasfilm, Ltd., for use in THXcertified theaters. The four component system includes 4x 15-in woofers in a push/pull configuration, one horn-loaded 10-in mid frequency cone and a horn-loaded 2-in exit high frequency compression driver. The CSC923 combines many of EAW s breakthrough technologies including a unique asymmetrical design mid/bass horn with EAW s patented VA 4 phase plug, push/pull low frequency technology and an asymmetrical high frequency horn. The push/pull configuration of the LF section reduces mechanically induced distortion at high output levels. To move air forward (away from the enclosure) half of the woofers push while the other half pull. The CSC923 s MF horn with VA 4 phase plug drastically reduces the horn-throat cancellation distortion that degrades the naturalness and intelligibility of dialog. By dividing the mid/high material between two horn-loaded subsystems, pattern control over the entire frequency range is enhanced. The HF element features a 2-in exit compression driver loaded with a two-dimensional asymmetric HF horn ensuring even distribution of HF information throughout the auditorium. The CSC923X contains an internal passive MF/HF crossover allowing for biamplified operation. C S C 7 2 3 The CSC723 full-range screen channel loudspeaker system is a scaled-down version of the CSC923 for large cinema exhibition spaces. This system provides high output and must be powered by three amplifier channels (triamplification). The three component system includes 2x 15-in woofers in a push/pull configuration, one horn-loaded 10-in mid frequency cone and a horn-loaded 2-in exit high frequency compression driver. The CSC723 combines many of EAW s breakthrough technologies including a unique asymmetrical design mid/bass horn with EAW s patented VA 4 phase plug, push/pull low frequency technology and an asymmetrical high frequency horn. The push/pull configuration of the LF section reduces mechanically induced distortion at high output levels. To move air forward (away from the enclosure) half of the woofers push while the other half pull. The CSC723 s MF horn with VA 4 phase plug drastically reduces the horn-throat cancellation distortion that degrades the naturalness and intelligibility of dialog. By dividing the mid/high material between two horn-loaded subsystems, pattern control over the entire frequency range is enhanced. The HF element features a 2-in exit compression driver loaded with a two-dimensional asymmetric HF horn ensuring even distribution of HF information throughout the auditorium. X The CSC723X contains an internal passive MF/HF crossover allowing for biamplified operation. 2
CINEMA SYSTEMS THREE-WAY SCREEN SYSTEMS C B 5 2 3 M The CB523M full-range screen channel loudspeaker system offers medium-sized theaters cost-effective access to the benefits of 3-way loudspeaker design. This triamplified system has been approved by the THX division of Lucasfilm, Ltd., for use in THX-certified theaters. The two component system includes a BV253C dual 15-in low frequency enclosure and an HK523M mid/high section. The low frequency enclosure uses optimally tuned enclosure venting to increase LF response while limiting driver excursion. The enclosure s shallow dimension allows convenient placement behind the screen. The HK523M mid/high section features a horn-loaded 10-in cone and a high power 1.4-in exit compression driver loaded with a 90 x 45 coverage pattern constant directivity horn. X The CB523MX features a biamplified powering option. Using a passive mid/high design lets it replace existing biamped two-way systems without requiring new electronic crossovers or amplifiers (electronic crossovers may require adjustment). C B 4 2 3 M X The CB423M offers small- to medium-sized theaters the same high output mid/high performance as the CB523M, but with a single 15-in low frequency section. This triamplified system has been approved by the THX division of Lucasfilm, Ltd., for use in THX-certified theaters. The CB423MX features a biamplified powering option. Using a passive mid/high design lets it replace existing biamped two-way systems without requiring new electronic crossovers or amplifiers (electronic crossovers may require adjustment). C B 1 5 3 The CB153 full-range screen channel loudspeaker system offers small theaters cost-effective access to the benefits of 3-way loudspeaker design. Its passive mid/high biamplified design lets it replace existing biamped two-way systems without requiring new electronic crossovers or amplifiers (electronic crossovers settings may need to be adjusted). The two component system consists of a BV154C low frequency enclosure and an HK153 passive mid/high system. The HK153 features an 8-in MF cone transducer and a 1-in exit high frequency compression driver loaded with EAW s patented WGP waveguide. The BV154C s optimally vented enclosure uses the enclosure s resonance to increase LF response while limiting driver excursion. Its asymmetrical enclosure design smooths response in the LF component s upper register and minimizes the potential for standing waves inside the enclosure. Left and right side enclosures can be placed flush to a back wall while still directing their output to the audience area. The enclosure can be inverted to provide a right or left-handed angle. X The CB153X is a full range passive version of the CB153. It features an internal passive LF/MF crossover/filter network allowing the entire system to be powered from a single amplifier channel with no external electronic crossover. 3
CINEMA SYSTEMS THREE-WAY SCREEN SYSTEMS COMPARATIVE DATA CSC923 CSC923X CSC723 CSC723X System Configuration Triamplified 3-way Biamplified 3-way Triamplified 3-way Biamplified 3-way Components 4x 15-in vented, 1x 10-in horn-loaded, 2-in compression driver on asymmetrical horn 4x 15-in vented, 1x 10-in horn-loaded, 2-in compression driver on asymmetrical horn 2x 15-in vented, 1x 10-in horn-loaded, 2-in compression driver on asymmetrical horn 2x 15-in vented, 1x 10-in horn-loaded, 2-in compression driver on asymmetrical horn Frequency Response (±3 db) SENSITIVITY (1W/1M) 35 Hz - 18 khz 103 db SPL SMPTE/ISO 2969 X curve 35 Hz - 18 khz 103 db SPL 35 Hz - 18 khz 101 db SPL SMPTE/ISO 2969 X curve 35 Hz - 18 khz 101 db SPL 108 db SPL 108 db SPL POWER HANDLING (AES) 114 db SPL 2000 Watts 108 db SPL 2000 Watts 114 db SPL 1000 Watts 108 db SPL 1000 Watts 350 Watts 350 Watts PEAK OUTPUT (1M) 120 Watts 142.0 db SPL 350 Watts 142.0 db SPL 120 Watts 136.0 db SPL 350 Watts 136.0 db SPL 139.4 db SPL 139.4 db SPL IMPEDANCE (Nominal) 140.8 db SPL 2x 4 Ohms 139.4 db SPL 2x 4 Ohms 140.8 db SPL 4 Ohms 139.4 db SPL 4 Ohms Coverage (h x v ) 80-90(asymmetrical)x50 80-90(asymmetrical)x50 80-90(asymmetrical)x50 80-90(asymmetrical)x50 Recommended Crossover 200/1000 Hz 200 Hz 250/1000 Hz 250 Hz DIMENSIONS (H X W X D) inches millimeters 90.5 x 32.0 x 22.5 2299 x 813 x 571 90.5 x 32.0 x 22.5 2299 x 813 x 571 65.5 x 32.0 x 22.5 1664 x 813 x 571 65.5 x 32.0 x 22.5 1664 x 813 x 571 WEIGHTS (Net/Shipping) pounds kilograms 309.0/329.0 140.16/149.04 309.0/329.0 140.16/149.04 204.0/224.0 92.53/101.47 204.0/224.0 92.53/101.47 4
CB523M CB523MX CB423M CB423MX CB153 CB153X Triamplified 3-way Biamplified 3-way Triamplified 3-way Biamplified 3-way Biamplified 3-way Passive 3-way 2x 15-in vented, 10-in horn-loaded, 1.4-in compression 2x 15-in vented, 10-in horn-loaded, 1.4-in compression 1x 15-in vented, 10-in horn-loaded, 1.4-in compression 1x 15-in vented, 10-in horn-loaded, 1.4-in compression 1x 15-in vented, 8-in vented, 1-in compression driver on WGP 1x 15-in vented, 8-in vented, 1-in compression driver on WGP 42 Hz - 19 khz 42 Hz - 19 khz 42 Hz - 19 khz 42 Hz - 19 khz 40 Hz - 18 khz 40 Hz - 18 khz 101 db SPL 101 db SPL 98 db SPL 98 db SPL 98 db SPL 98 db SPL 108 db SPL 108 db SPL 112 db SPL 104 db SPL 112 db SPL 104 db SPL 98 db SPL 1000 Watts 1000 Watts 500 Watts 500 Watts 500 Watts 320 Watts 325 Watts 325 Watts 200 Watts 350 Watts 200 Watts 350 Watts 320 Watts 137.0 db SPL 137.0 db SPL 131.0 db SPL 131.0 db SPL 131.0 db SPL 129.0 db SPL 139.1 db SPL 139.1 db SPL 141.0 db SPL 135.4 db SPL 141.0 db SPL 135.4 db SPL 127.0 db SPL 4 Ohms 4 Ohms 90x45 90x45 90x45 90x45 90x90 90x90 350/1300 Hz 350 Hz 350/1475 Hz 350 Hz 350 Hz 69.41 x 24.80 x 17.75 1763 x 630 x 451 69.41 x 24.80 x 17.75 1763 x 630 x 451 51.66 x 24.83 x 22.20 1312 x 631 x 564 51.66 x 24.83 x 22.20 1312 x 631 x 564 50.60 x 36.13 x 13.90 1285 x 918 x 353 50.60 x 36.13 x 13.90 1285 x 918 x 353 215.0/230.0 97.5/104.3 215.0/230.0 97.5/104.3 150.0/165.0 68.1/74.9 150.0/165.0 68.1/74.9 105.0/115.0 47.8/52.3 105.0/115.0 47.8/52.3 5
CINEMA SYSTEMS TWO-WAY SCREEN SYSTEMS C B 2 5 9 2 The CB2592 large format 2-way screen channel loudspeaker system fills the largest theaters with all the high-impact, full-range sound encoded on today s digital soundtracks while reproducing voices clearly and naturally. The three component system includes two BV253C vented dual 15-in low frequency units and EAW s HK2591 high frequency system a large format 90 x 40 horn loading a large diaphragm 2-in exit compression driver. The HK2591 s large format HF cinema horn ensures even distribution of HF information over the entire audience area. The BV253C s optimally vented enclosures use enclosure resonance to increase LF response while limiting driver excursion. This method produces less distortion and minimizes driver strain while extending LF response to the lowest octaves. Their shallow enclosure dimensions allow convenient placement behind the screen. C B 2 5 9 1 X The CB2591 large format 2-way screen loudspeaker system is designed to meet all THX requirements for large theaters. The CB2591 is approved by the THX division of Lucasfilm, Ltd., for use in THX-certified theaters. The two component system includes a BV253C vented dual 15-in low frequency unit and EAW s HK2591 high frequency system a large format 90 x 40 constant directivity horn loading a large diaphragm 2-in exit compression driver. The HK2591 s large format HF cinema horn ensures even distribution of HF information over the entire audience area. The BV253C s optimally vented enclosure uses enclosure resonance to increase LF response while limiting driver excursion. This method produces less distortion and minimizes driver strain while extending LF response to the lowest octaves. The CB2591X features an internal passive two-way crossover/filter network and can be powered from a single amplifier channel with no external electronic crossover. 6
CINEMA SYSTEMS TWO-WAY SCREEN SYSTEMS C B 2 5 9 The CB259 high power, full range 2-way screen loudspeaker system fills medium-sized theaters with all the high-impact, full-range sound encoded on today s digital soundtracks while reproducing voices clearly and naturally. The two component system includes a BV253C vented dual 15-in low frequency unit and a HK294 high frequency system a medium format 90 x 40 HF horn loading a large diaphragm 2-in exit compression driver. The HK294 s constant directivity horn assures even distribution of high frequency information to every seat in the house. Its shortened horn throat minimizes horn throat distortion, eliminating the 700 Hz honk that has plagued cinema HF horns. The BV253C s optimally vented enclosure uses enclosure resonance to increase LF response while limiting driver excursion. This method produces less distortion and minimizes driver strain while extending LF response to the lowest octaves. X The CB259X features an internal passive two-way crossover/filter network and can be powered from a single amplifier channel with no external electronic crossover. C B 1 5 2 The CB152 2-way screen loudspeaker system fills medium-sized theaters with all the highimpact, full-range sound encoded on today s digital soundtracks while reproducing voices clearly and naturally. The two component system includes a BV154C vented 15-in low frequency unit and an HK152 high frequency system a medium format 90 x 90 HF horn loading a large diaphragm 1.4-in exit compression driver. The HK152 s medium format cinema HF horn ensures even distribution of HF information over the entire audience area. The BV154C s optimally vented enclosure uses the enclosure s resonance to increase LF response while limiting driver excursion. This method produces less distortion and minimizes driver strain while extending LF response to the lowest octaves. The BV154C s asymmetrical enclosure design smooths response in the LF component s upper register and minimizes the potential for standing waves inside the enclosure. Left and right side enclosures can be placed flush to a back wall while still directing their output to the audience area. The enclosure can be inverted to provide a right or left-handed angle. X The CB152X features an internal passive two-way crossover/filter network and can be powered from a single amplifier channel with no external electronic crossover. 7
CINEMA SYSTEMS TWO-WAY SCREEN SYSTEMS COMPARATIVE DATA CB2592 CB2591 CB2591X CB259 CB259X System Configuration Biamplified 2-way Biamplified 2-way Passive 2-way Biamplified 2-way Passive 2-way Components 4x 15-in vented, 2-in compression 2x 15-in vented, 2-in compression 2x 15-in vented, 2-in compression 2x 15-in vented, 2-in compression 2x 15-in vented, 2-in compression Frequency Response (±3 db) 42 Hz - 18 khz 42 Hz - 16 khz 42 Hz - 18 khz 42 Hz - 17 khz 42 Hz - 17 khz SENSITIVITY (1W/1M) 103 db SPL 101 db SPL 100 db SPL 101 db SPL 101 db SPL POWER HANDLING (AES) 111 db SPL 2000 Watts 111 db SPL 1000 Watts 500 Watts 111 db SPL 1000 Watts 500 Watts PEAK OUTPUT (1M) 100 Watts 142.0 db SPL 100 Watts 137.0 db SPL 133.0 db SPL 100 Watts 137.0 db SPL 134.0 db SPL IMPEDANCE (Nominal) 137.0 db SPL 2x 4 Ohms 137.0 db SPL 4 Ohms 4 Ohms 137.0 db SPL 4 Ohms 4 Ohms Coverage (h x v ) 90x40 90x40 90x40 90x40 90x40 Recommended Crossover 500 Hz 500 Hz 800 Hz DIMENSIONS (H X W X D) inches millimeters 112.44 x 37.63 x 33.22 2856 x 956 x 844 77.75 x 29.00 x 34.19 1975 x 737 x 868 77.75 x 29.00 x 34.19 1975 x 737 x 868 54.19 x 24.44 x 17.75 1376 x 621 x 397 54.19 x 24.44 x 17.75 1376 x 621 x 397 WEIGHTS (Net/Shipping) pounds kilograms 343.5/391.5 156.3/178.1 203.5/237.5 92.6/108.1 203.5/237.5 92.6/108.1 160.5/177.5 73.0/80.8 160.5/177.5 73.0/80.8 8
CB152 CB152X System Configuration Biamplified 2-way Passive 2-way Components 15-in vented, 1.4-in compression driver on CD horn 15-in vented, 1.4-in compression driver on CD horn Frequency Response (±3 db) 45 Hz - 17 khz 40 Hz - 18 khz SENSITIVITY (1W/1M) 98 db SPL 98 db SPL POWER HANDLING (AES) 110 db SPL 500 Watts 500 Watts PEAK OUTPUT (1M) IMPEDANCE (Nominal) 150 Watts 131.0 db SPL 137.0 db SPL 131.0 db SPL Coverage (h x v ) 90x90 90x90 Recommended Crossover 1200 Hz DIMENSIONS (H X W X D) inches millimeters 53.00 x 29.25 x 11.75 1346 x 743 x 298 53.00 x 29.25 x 11.75 1346 x 743 x 298 WEIGHTS (Net/Shipping) pounds kilograms 103.0/115.0 46.9/52.3 103.0/115.0 46.9/52.3 9
CINEMA SYSTEMS SURROUNDS C R 8 2 The CR82 two-way, passive, full range cinema surround loudspeaker system the highest sensitivity surround loudspeaker on the market has been approved for use in THX -certified theaters. The CR82 produces 8 15 db more output than traditional surrounds. Its unique coaxial design provides ultimate time alignment between the high and low frequency sections for enhanced fidelity throughout the audible range. Its 12 Ohm impedance lets system designers safely "daisy-chain" several surrounds off a single amplifier channel. The CR82 is specifically engineered to cover a larger seating area with higher quality, higher output sound than traditional cinema surrounds. With 250 Watts AES standard power handling and a 90 conical coverage pattern, it can be mounted higher and cover more seats than traditional surrounds. Higher placement lets the systems cover a larger area across the room creating a larger area of stereo surround coverage than traditional surround placement. The front baffle is angled down 15 to accommodate overhead mounting. Four threaded mounting points on the rear accept several industry standard wall brackets. The passive crossover/filter network included in the CR82 is so complex that it goes beyond merely dividing the signal and actually performs critical equalization functions. This means it will provide more detailed, more natural reproduction of any sonic event occurring in the 360 aural arena. C R 5 8 The CR58 two-way, passive, full range cinema surround loudspeaker system is engineered to reproduce today s stereo full bandwidth digital surround tracks. It features a 15-in woofer and a 1-in exit compression driver loaded with a wide dispersion constant directivity horn. The CR58 is specifically engineered to cover a larger seating area with higher quality, higher output sound than traditional cinema surrounds. With 500 Watts AES standard power handling and a 90 x 70 coverage pattern, it can be mounted higher and cover more seats than traditional surrounds. Higher placement lets the systems cover a larger area across the room creating a larger area of stereo surround coverage than traditional surround placement. The system produces 8 15 db more output than traditional surrounds. The front baffle is angled down 20 to accommodate overhead mounting. The passive crossover/filter network included in the CR58 is so complex that it goes beyond merely dividing the signal and actually performs critical equalization functions. This means it will provide more detailed, more natural reproduction of any sonic event occurring in the 360 aural arena. 10
CINEMA SYSTEMS SURROUNDS C R 7 2 The CR72 two-way, passive, full range cinema surround loudspeaker system is engineered to reproduce today s full bandwidth digital surround tracks. It features an 8-in woofer and a 1-in dome tweeter loaded with EAW s proprietary WGP (Wave Guide Plate ) mounted in a 20 slanted baffle. This system is approved by the THX division of Lucasfilm, Ltd., for use in THX-certified theaters. With 150 Watts AES standard power handling and a 110 conical coverage pattern, the CR72 provides a seamless ambient surround field throughout the seating area. The WGP s extra wide dispersion pattern lets CR72 s be used in cinemas with low ceilings without sacrificing coverage of fringe seats. Four threaded mounting points on the rear accept several industry standard wall brackets. The passive crossover/filter network included in the CR72 goes beyond merely dividing the signal and actually performs critical equalization functions. This means it will provide more detailed, more natural reproduction of any sonic event occurring in the 360 aural arena. S U R R O U N D B R A C K E T S EAW provides cost-effective u -type wall brackets for all EAW surround speakers. These brackets provide a safe and simple method for quickly mounting EAW surround speakers to theatre walls. In addition, EAW and Allen Products Company have teamed up to allow customers to drop ship bracket components to EAW for partial mounting to the surround speakers, saving installation and labor on the job site. For more information, contact your nearest authorized EAW dealer or representative. 11
CINEMA SYSTEMS SURROUNDS COMPARATIVE SYSTEMS DATA CR82 CR58 CR72 System Configuration Passive 2-Way Passive 2-Way Passive 2-Way Components 12-in woofer, 1.4-in compression driver on waveguide, coaxial 15-in woofer, 1-in compression driver on CD horn 8-in woofer, 1-in tweeter on WGP Frequency Response (±3 db) SMPTE/ISO 2969 X curve 70 Hz - 17 khz 50 Hz - 18 khz SMPTE/ISO 2969 X curve 68 Hz - 19 khz Sensitivity (1W/1M) 101 db SPL 98 db SPL 95 db SPL Power Handling (AES) 250 Watts 500 Watts 150 Watts Peak Output (1M) 131.0 db SPL 131.0 db SPL 122.8 db SPL Impedance (Nominal) Coverage (H x V ) 90 (conical) 90 x 70 100 x 100 EAW Bracket Part Number 606129 606067 606129 DIMENSIONS (H X W X D) inches millimeters 24.00 x 16.50 x 11.50 610 x 419 x 279 17.25 x 29.75 x 15.25 438 x 756 x 387 16.09 x 16.50 x 12.12 409 x 419 x 308 WEIGHTS (Net/Shipping) pounds kilograms 48.0/52.0 21.8/23.7 56.0/64.0 25.5/29.1 26.0/33.0 11.8/15.0 12
CINEMA SYSTEMS SUBWOOFERS S B 2 8 4 C The SB284C cinema subwoofer loudspeaker system uses dual 18-in cone transducers each mounted in its own optimally vented subenclosure to fill large capacity theaters with high definition sub bass information at earth-shaking output levels. This system has been approved by the THX division of Lucasfilm, Ltd., for use in THX-certified theaters. Dual two-terminal barrier strips, one wired directly to each 18-in woofer, are located on the side of the enclosure for convenient access in cramped installation areas. S B 1 8 5 C The SB185C low profile cinema subwoofer loudspeaker system uses a high power 18-in cone transducer mounted in an optimally vented enclosure to fill small to medium-sized theaters with high definition sub bass information at earth-shaking output levels. Its low profile design allows for placement flexibility and the efficient clustering of multiple enclosures to optimize sub bass coverage of the entire auditorium. A two-terminal barrier strip, which accommodates bare wire, tinned leads or spade lugs, is located on the side of the enclosure for convenient access in cramped installation areas. S B 1 8 4 C The SB184C cinema subwoofer loudspeaker system uses a high power 18-in cone transducer mounted in an optimally vented enclosure to fill small to medium capacity theaters with high definition sub bass information at earth-shaking output levels. A two-terminal barrier strip, which accommodates bare wire, tinned leads or spade lugs, is located on the side of the enclosure for convenient access in cramped installation areas. 13
CINEMA SYSTEMS SUBWOOFERS COMPARATIVE DATA SB184C SB185C SB284C System Configuration Components Subwoofer Subwoofer Subwoofer 18-in subwoofer 18-in subwoofer 2x 18-in subwoofer Frequency Response (±3 db) Sensitivity (1W/1M) Power Handling (AES) Peak Output(1M) Impedance (Nominal) Recommended Crossover Frequency 34 Hz - 500 Hz 34 Hz - 500 Hz 30 Hz - 300 Hz 96 db SPL 96 db SPL 99 db SPL 800 Watts 800 Watts 1600 Watts 128.0 db SPL 128.0 db SPL 137.0 db SPL 2x 100 Hz 100 Hz 100 Hz DIMENSIONS (H X W X D) inches millimeters 39.50 x 24.50 x 21.00 19.00 x 42.00 x 23.31 29.75 x 48.25 x 23.75 1003 x 622 x 533 483 x 1067 x 592 756 x 1226 x 603 WEIGHTS (Net/Shipping) pounds kilograms 95.0/105.0 95.0/105.0 194.0/206.0 43.2/47.8 43.2/47.8 88.3/93.7 14
CINEMA SYSTEMS CX300 CLOSE COUPLED CINEMA PROCESSOR The new CX300 brings EAW s Close Coupling to cinema applications with a line of dedicated cinema Close Coupled Electronic Crossovers. The CX300 must be factoryconfigured to control a specific EAW cinema screen channel system. Rather than develop generic crossover settings that provide substandard system integration, EAW tightly aligns (Close Couples ) each crossover configuration to the specific loudspeaker it controls. These cost effective, single rack space, analog electronic crossovers are designed for use in biamplified or triamplified applications. The CX300 Close Coupled Electronic Crossover is available as a three-channel configuration, so a single device will provide crossover, equalization, and time-offset functions for a Left, Center, and Right (3-channel) cinema system. Each model comes preconfigured from the factory. This removes the burden of setting up from the end user and assures optimum system performance of every bi or triamplified EAW Cinema screen channel loudspeaker system. Go to the CX300 Crossover Selector Chart to determine the appropriate CX300 configuration for your screen channel loudspeakers. CX300 Configuration CX300-CB152 CX300-CB259 CX300-CB2591 CX300-CB153 CX300-CB423M CX300-CB423MX CX300-CB523M CX300-CB523MX CX300-CSC723 CX300-CS723X CX300-CSC923 CX300-CSC923X Loudspeaker Controlled CB152 CB259 CB2591 CB153 CB423M CB423MX CB523M CB523MX CSC723 CS723X CSC923 CSC923X 15