SPECIFICATION SHEET 802.11n WLAN Access Point FEATURES Full 802.11n performance with standard 802.3af Simplifies and reduces total cost of installation using standard Power-over-Ethernet (PoE) One or two radio option Helps reduce costs for single band networks Multiband Operation Allows concurrent sensing on 2.4 Ghz and 5.0 Ghz frequency bands for multi-band intrusion protection or troubleshooting 2x3 MIMO radio High throughput MIMO technology with extended range capabilities Mobility Supports fast secure roaming Security This unique multi-purpose device can execute and enforce the IDS/IPS security policies configured in the Motorola wireless switch, and can also be utilized as a 24x7 dedicated sensor with Wireless IPS from Air Defense The is a thin (dependent) multipurpose access point designed to lower the cost of deploying and operating a secure, reliable 802.11n wireless LAN (WLAN) in branch offices or headquarters facilities. The offers simultaneous WLAN access and sensing enabling remote over-the-air helpdesk support, or Wireless intrusion prevention. Fast and Easy Deployment The derives its intelligence from an RFS switch/controller, so installation is plug-and play-for optimal service in new wireless WLANs. Automatic Channel and Power Optimization Common problems such as building attenuation, electronic interference or sub-optimal access point placement are minimalized as the SMART RF feature of the switch/controller automatically optimizes power and channel selection so each user gets always-on high-quality access and mobility. On-the-fly Remote Helpdesk The s multipurpose architecture allows IT to extend immediate helpdesk support -- as if the technician was sitting directly under the access point. Motorola helpdesk solutions supported by the includes: AirDefense Advanced Troubleshooting allows any helpdesk technician to immediately emulate and test a user s connectivity over-the-air from device all the way to the back-end application and isolate the obstruction, even if it is not caused by the WLAN. Spectrum Analysis allows the helpdesk technician to analyze the local spectrum for interference. AirDefense Vulnerability Analysis allows the helpdesk to remotely scan for security breaches on the wired or wireless network on a scheduled or periodic basis to assure network security and regulatory compliance. Gap-free Security Security includes layer 2-7 stateful packet filtering firewall, AAA RADIUS services, Wireless IPS-lite, VPN gateway, and location-based access control. Users can also add role-based access control and AirDefense Wireless IPS and Rogue detection for premium-level security vigilance. Because the sensor supports simultaneous multi-band sensing (band unlocked) for both 2.4 MHz and 5.0 MHz spectrums, the Wireless IPS and rogue detection is always-on with no timeslicing. High Reliability The is designed to optimize network availability through its central and pre-emptive intelligence which dynamically senses weak or failing signals, securely moves mobile users to alternate APs, and boosts signal power to automatically fill RF holes and ensure uninterrupted mobile user access. Full Performance using Standard POE The is designed to provide full 802.11n performance using standard and lower cost POE 802.3 (af).
Application Support Supports Call Admission Control, for optimized VoWLAN performance, as well as video streaming and data throughput for 802.11 a/b/g/n clients network architecture The offers the comprehensive functionality necessary to extend wireless voice, video and data access in any size facility -- whether headquarters or branch location. Load balancing, pre-emptive roaming and rate scaling Increases reliability and resilience of the wireless network to support mission critical applications - Driving down the cost of 802.11n Dual form-factors Plenum-rated external antenna model with metal housing is ideal for installation above ceiling tiles; the plastic internalantenna housing allows for installation within the carpeted-space and provides cost-effective coverage via the integrated 2.4 GHz and 5.2 GHz antennas Flexible mounting options Fast and easy installation with wall, ceiling and above-ceiling tile mounting options; internal antenna version snaps on to T-bars of suspended ceilings without the use of any hardware; external antenna version installs above ceiling tiles Headquarters AirDefense Management, Network Assurance and Security Indoor Mesh: 802.11a/b/g/n RFS 7000s Campus Grounds Outdoor Mesh: AP 7181 802.11n WAN Backhaul Access Layer Headquarters Adjacent Building RFS 7000s Indoor Mesh: 802.11a/b/g/n RFID Reader RFID Tags 3G/4G Broadband Backhaul Point-to-Point/Point-to-Multipoint RFS 6000 Remote Locations Small Offices and Storefronts Medium Enterprise RFS 4000 Wired connection Wireless connection Long-distance wired or wireless connection 2
Device mobility Supports fast, secure roaming at Layer 2 and Layer 3. In addition, the network optimizes mobile performance with load balancing, pre-emptive roaming and rate scaling. Greater Coverage per AP The powerful 24 dbm radio increases coverage, performance and obstruction penetration versus 23 dbm radios. In addition, receiver sensitivity has been increased proportionally so users have an increased ability to maintain high-performance access through thick doors and walls to users even while on-the-move. In addition, the s 2 x 3 MIMO design ensures premium transmit and receive communications. Voice, Locationing, Hotspots, Guest Access Out-of-the-box, the supports voice over wireless LAN (VoWLAN) QoS, which ensures tollquality even with many simultaneous VoWLAN calls on a single access point. Locationing services over 802.11 provide the ability to locate and track people or assets, and even to control access to the network or applications. In addition, its easy to provide hotspot and guest access and assure the user can only access authorized networks, sites, or applications. Device and Network Acceleration Device and network performance can be accelerated through a virtual LAN feature via the switch/controller. Each access point can be virtualized into four unique VLANs which can be customized to direct broadcast traffic to the intended recipient. This reduces overall network traffic while improving device performance and battery life up to 25%. This also reduces the overall number of access points required to provide unique device services. Simple Maintenance The requires no configuration or manual firmware maintenance. The Motorola wireless controller discovers access points on the network and automatically downloads all configuration parameters and firmware, greatly reducing installation, maintenance and troubleshooting costs for Layer 2 and Layer 3 deployments. For more information, visit us on the Web at www.motorola.com/ap650 or access our global contact directory at www.motorola.com/ enterprisemobility/contactus Specifications Physical Characteristics (internal antenna) (external antenna) Dimensions: 9.5 in. L x 7.5 in. W x 1.7 in. H 8.5 in. L x 5.6 in. W x 1.5 in. H 24.13 cm L x 18.916 cm W x 4.36 cm H 21.64 cm L x 14.10 cm W x 3.771 cm H Weight: 2.0 lbs./.91 kg 2.5 lbs./1.14 kg Part number:* AP-0650-60010-WW; AP-0650-60010-US; AP-0650-60020-WW; AP-0650-60020-US AP-0650-66030-WW ; AP-0650-66030-US AP-0650-66040-WW; AP-0650-66040-US Available mounting configurations: Ceiling-mount (to suspended ceiling T-bars, below tile); wall mount Ceiling-mount (above tile); wall-mount Plenum rated: No Yes, certified to UL 2043 LED indicators: 2 LED indicators with multiple modes indicating 2.4GHz/5 GHz Activity, Power, Adoption and Errors Wireless Data Communications and Networking Data rates supported: 802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps802.11a: 6,9,12,18,24,36,48, and 54Mbps 802.11n: MCS 0-15 up to 300Mbps Network standard: 802.11a, 802.11b, 802.11g, 802.11n Wireless medium: VLANs/WLANs supported: Uplink: Radio Characteristics Operating channels: Maximum available transmit power: Transmit power Adjustment: Antenna configuration: Operating bands: Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO) VLANs and WLANs are controller-dependent Auto-sensing 10/100/1000Base-T Ethernet 5GHz: All channels from 4920 MHz to 5825 MHz 2.4GHz: Chan 1-13 (2412-2472 MHz), Chan 14 (2484 MHz) Japan only Actual operating frequencies depend on national regulatory limits 24dBm 1dB increments 2x3 MIMO (transmit on two and receive on all three antennas) FCC EU 2.412 to 2.462 GHz 2.412 to 2.472 GHz 5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 5.725 to 5.825 (UNII -3) 5.150 to 5.350 GHz 5.725 to 5.850 (ISM) 5.470 to 5.725 GHz (Country Specific) Japan 2.412 to 2.484GHz 4.900 to 5.000 GHz 5.150 to 5.250 GHz Continued on next page... 3
SPECIFICATION SHEET Thin 802.11n WLAN Access Point Specifications (continued) User environment (internal antenna) (external antenna) Operating temperature: 32 F to 122 F/0 C to 50 C Storage temperature: -40 F to 158 F/-40 C to 70 C Operating humidity: 5%-95% (non-condensing) Operating altitude: 8,000 ft./2438 m Storage altitude: 15,000 ft./4572 m Electrostatic discharge: +/- 15 kv (Air), +/- 8 kv (contact) Power Specifications Operating voltage: 802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range) Operating current: 270mA (typical) Integrated Power-over-Ethernet support: Standards-based IEEE 802.3af Maximum radio transmit power: BAND SINGLE ANTENNA COMPOSITE TRANSMIT POWER DUAL ANTENNA COMPOSITE TRANSMIT POWER 2400MHZ +21 dbm +24 dbm 5200MHZ +19dBm +22 dbm Typical rms power consumption Option1 DC VOLTAGE DC AMPS DC POWER CONSUMPTION 1 48V 270mA 12.95W 2 48V 209mA 10.00W Antenna Specifications Type: Integrated 2.4 GHz and 5.2 GHz Dual-Antenna Elements Six RSMA connectors for external antennas (not included) Band: 2.4 GHz to 2.5 GHz; 4.9 GHz to 5.850 GHz (actual operating frequencies depend on regulatory rules and certification agency) VSWR: < 2:1 Antenna-specific Gain: 2.0 dbi (2.4GHz), 4.8dBi (5GHz) Antenna-specific Internal antenna information INTERNAL ANTENNA DESCRIPTION VALUES VSWR < 2:1 Peak gain, 2.4GHz band Peak gain, 5.2GHz band 2.0dBi 4.8dBi Regulatory Product safety certifications: Radio approvals: UL 60950, cul, EU EN 60950, TUV and UL 2043 (external antenna) FCC (USA), Industry Canada, CE (Europe) and TELEC (Japan) Continued on next page... 4
Receiver Sensitivity (typical) at antenna housing connector (metal housing), 2400MHz band Receiver Sensitivity (typical) at antenna housing connector (metal housing), 5200MHz band Rate/MCS Mode Average sens (dbm) 1 Legacy -95 2 Legacy -94 5.5 Legacy -93 11 Legacy -90 6 Legacy -94 9 Legacy -94 12 Legacy -94 18 Legacy -94 24 Legacy -90 36 Legacy -87 48 Legacy -83 54 Legacy -82 MCS0 HT20-94 MCS1 HT20-93 MCS2 HT20-91 MCS3 HT20-87 MCS4 HT20-84 MCS5 HT20-80 MCS6 HT20-79 MCS7 HT20-77 MCS8 HT20-94 MCS9 HT20-91 MCS10 HT20-88 MCS11 HT20-85 MCS12 HT20-82 MCS13 HT20-78 MCS14 HT20-77 MCS15 HT20-75 MCS0 HT40-88 MCS1 HT40-88 MCS2 HT40-87 MCS3 HT40-84 MCS4 HT40-82 MCS5 HT40-77 MCS6 HT40-76 MCS7 HT40-74 MCS8 HT40-88 MCS9 HT40-87 MCS10 HT40-85 MCS11 HT40-82 MCS12 HT40-79 MCS13 HT40-75 MCS14 HT40-73 MCS15 HT40-71 Rate/MCS Mode Average sens (dbm) 6 Legacy -93 9 Legacy -93 12 Legacy -93 18 Legacy -92 24 Legacy -89 36 Legacy -86 48 Legacy -82 54 Legacy -81 MCS0 HT20-93 MCS1 HT20-92 MCS2 HT20-90 MCS3 HT20-86 MCS4 HT20-83 MCS5 HT20-79 MCS6 HT20-78 MCS7 HT20-76 MCS8 HT20-93 MCS9 HT20-90 MCS10 HT20-87 MCS11 HT20-84 MCS12 HT20-81 MCS13 HT20-77 MCS14 HT20-75 MCS15 HT20-74 MCS0 HT40-90 MCS1 HT40-88 MCS2 HT40-86 MCS3 HT40-83 MCS4 HT40-80 MCS5 HT40-76 MCS6 HT40-74 MCS7 HT40-73 MCS8 HT40-89 MCS9 HT40-86 MCS10 HT40-84 MCS11 HT40-81 MCS12 HT40-78 MCS13 HT40-74 MCS14 HT40-72 MCS15 HT40-71 5
motorola.com/wlan Part number SS-AP650. Printed in USA 10/10. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2010 Motorola, Inc. All rights reserved. For system, product or services availability and specific information within your country, please contact your local Motorola office or Business Partner. Specifications are subject to change without notice.