Cisco 200 Series Switches Cisco Small Business Build a Powerful, Easy-to-Use Basic Business Network at an Affordable Price The key to succeeding in today s competitive business environment is investing resources wisely knowing how to separate the essential from the extraneous and get the most value for your dollars. As the backbone of your business and productivity applications, the small business network clearly falls into the essential category. But that doesn t mean you need the most advanced feature set on the market. With Cisco 200 Series Switches, you can achieve business-class network security and performance without paying for advanced network management features that you will not need. When you need a reliable solution to share network resources and connect computers, printers, and servers, but low cost is a top priority, Cisco 200 Series Switches provide the ideal solution. Cisco 200 Series Switches Cisco 200 Series Switches are a series of affordable smart switches that combine powerful network performance and reliability with the essential network management features you need for a basic business network. These expandable Fast Ethernet or Gigabit Ethernet switches provide basic management, security, and quality-of-service (QoS) features beyond those of an unmanaged or consumer-grade switch, at a lower cost than managed switches. And with an easy-to-use web user interface and the Cisco Discovery Protocol, you can deploy and configure a rock-solid business network in minutes. Business Applications Whether you need basic high-speed connectivity for your computers and servers or a comprehensive voice, data, and wireless technology solution, Cisco 200 Series switches can meet your business needs. Possible deployment scenarios include: High-speed desktop connectivity. Cisco 200 Series switches can quickly and securely connect employees working in small offices with one another and with all of the servers, printers, and other devices they use. High performance and reliable connectivity help speed file transfers and data processing, improve network uptime, and keep your employees connected and productive. 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 1 of 10
Secure wireless connectivity. Cisco 200 Series switches work with Cisco and third-party wireless solutions to extend the reach of your network. Employees can work productively from conference rooms and common areas, collaborate in any office, and access business applications from wherever they are. Power over Ethernet (PoE) enables the switch to send power over the network cable to power wireless access points and simplifies the wireless deployment. Gigabit Ethernet speed helps ensure that your employees have the bandwidth and performance they need to make the most of mobile productivity. And with embedded security, your employees can work with confidence, knowing that only authorized users can access the network and network applications. Unified communications. The Cisco 200 Series provides QoS features to enable you to prioritize delaysensitive traffic in your network and let you converge all of your communications solutions such as IP telephony and video surveillance over a single Ethernet network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses, and Cisco 200 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products. Features and Benefits Cisco 200 Series Switches provide all of the features you need to create a basic business-class network at an affordable price. These features include: Easy configuration and management: Cisco 200 Series switches are designed to be easy to deploy and use by small businesses or the partners that serve them. Simple-to-use web-based interfaces reduce the time it takes to deploy, manage, and troubleshoot your network. Key features include: Cisco Discovery Protocol simplifies setup by discovering all connected Cisco devices and allowing them to share information Cisco FindIT Network Discovery Utility works through a simple toolbar on the user s web browser to discover Cisco devices on the network and display basic information, such as serial numbers and IP addresses, to aid in the configuration and speed the deployment of Cisco Small Business products. For more information, and to download the utility, visit www.cisco.com/go/sbtoolbar. Performance and reliability: Cisco 200 Series switches have been tested to deliver the high availability and performance you would expect from a Cisco switch and help you prevent costly downtime. The switches speed file transfer times, improve slow and sluggish networks, keep your vital business applications available, and help your employees respond more quickly to customers and each other. With a network based on Cisco 200 Series switches, you can address all of your business communication and connectivity needs and reduce the total cost of ownership of your technology infrastructure. PoE: Cisco 200 Series switches are available with PoE on both Fast Ethernet and Gigabit Ethernet models. This capability simplifies the deployment of IP telephony, wireless, video surveillance, and other solutions by allowing you to send data and power to network endpoints over the same network cable. With no need for separate power supplies or outlets for IP phones, IP cameras, or wireless access points, you can speed up deployment and installation and take advantage of advanced communications technologies quickly, and at a lower cost. Network security: Cisco 200 Series switches provide basic security and network management features you need to maintain a level of security for your business, keep unauthorized users off the network, and protect your business data. The switches provide integrated network security to reduce the risk of a security breach, with IEEE 802.1X port security to control access to your network. 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 2 of 10
IP telephony support: Cisco 200 Series switches include QoS features to prioritize delay-sensitive services such as voice and video, simplify unified communications deployments, and help ensure consistent network performance for all services. For example, Auto Voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic. IPv6 support: Internet service providers worldwide are moving to the latest version of Internet Protocol to accommodate the growing number of network devices. Cisco 200 Series switches provide native support for IPv6 alongside traditional IPv4. That means you can take full advantage of IPv6-enabled operating systems and applications in the future, without having to upgrade your network equipment. An energy-efficient solution: Cisco 200 Series switches are designed to be eco-friendly without compromising performance. They help conserve energy by optimizing power use, which helps protect the environment and lowers your energy costs. Power-saving features include: Automatic power down on Gigabit ports when a link is not active Embedded intelligence to adjust power based on cable length on Gigabit Ethernet models Fanless design in most models, which reduces power consumption, increases reliability, and provides quieter operation Additional Gigabit Ethernet ports: The Cisco 200 Series provides more ports per switch than other switches in the market, giving you more flexibility to connect and empower your business. Gigabit Ethernet models feature 26- and 50-port switches, versus traditional devices that offer 20 or 44 ports with 4 shared ports. The Cisco 200 Series also offers mini Gigabit Interface Converter (mini-gbic) expansion slots that give you the option to add fiber optic or Gigabit Ethernet uplink connectivity to the switch. With the ability to increase the connectivity range of the switches, you have more flexibility to design your network around your unique business environment, and to easily connect switches on different floors or across the business. Peace of mind and investment protection: Cisco 200 Series Switches offer the reliable performance, investment protection, and peace of mind you expect from a Cisco switch. When you invest in the Cisco 200 Series, you gain the benefit of: Cisco limited lifetime warranty Cisco Small Business Investment Protection Program, which lets you upgrade your Cisco 200 Series switch to another Cisco Small Business or Cisco Catalyst switch in the future and receive credit for the value of the switch (available only in the United States and Canada) Rigorous testing to help ensure easy integration and compatibility with other Cisco networking and communications products, including the complete Cisco Small Business portfolio World-class service and support: Your time is valuable, especially when you have a problem that is affecting your business. That s why Cisco 200 Series switches are supported by the Cisco Small Business Support Center, a dedicated resource for small business customers and networks. The Cisco Small Business Support Center connects you directly with a technician who has earned the Cisco CCNA certification, who can give you the expert help you need right away. You also have access to extensive technical and product information through the Cisco Small Business Support Community. Visit www.cisco.com/go/smallbizsupport. Multiple language options: The Cisco 200 Series is available in seven languages: English, French, German, Italian, Spanish, Japanese, and simplified Chinese. All product documentation and most user interfaces are translated, giving you the ability to select your preferred language. 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 3 of 10
Product Specifications Table 1 gives the product specifications for the Cisco 200 Series Switches. Table 1. Feature Product Specifications Performance Switching capacity and forwarding rate Model Name Product Ordering Number Capacity in Millions of Packets per Second (mpps) (64-byte packets) Switching Capacity in Gigabits per Second (Gbps) SF200-24 SLM224GT-xx 6.55 8.8 SF200-24P SLM224PT-xx 6.55 8.8 SF200-48 SLM248GT-xx 10.12 13.6 SF 200-48P SLM248PT-xx 10.12 13.6 SG200-18 SLM2016T-xx 26.78 36.0 SG200-26 SLM2024T-xx 38.69 52.0 SG200-26P SLM2024PT-xx 38.69 52.0 SG200-50 SLM2048T-xx 74.41 100.0 SG200-50P SLM2048PT-xx 74.41 100.0 Layer 2 Switching Spanning Tree Protocol (STP) Port grouping VLAN Voice VLAN Internet Group Management Protocol (IGMP) versions 1 and 2 snooping Head-of-line (HOL) blocking Standard 802.1d STP support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 4 groups Up to 4 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation Support for up to 128 VLANs simultaneously (out of 4096 VLAN IDs). Port-based and 802.1Q tag-based VLANs Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups HOL blocking prevention Security IEEE 802.1X (Authenticator role) Port security Storm control 802.1X: RADIUS authentication and accounting, MD5 hash Supports time-based 802.1X Dynamic VLAN assignment Locks MAC addresses to ports, and limits the number of learned MAC addresses Broadcast, multicast, and unknown unicast Quality of Service Priority levels Scheduling Class of service Rate limiting 4 hardware queues Strict priority and weighted round-robin (WRR) Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS) Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ) Ingress policer, per VLAN and per port Standards Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1350, RFC 1533, RFC 1541, RFC 1542, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC 1215, RFC 3416 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 4 of 10
Feature IPv6 IPv6 IPv6 QoS Multicast Listener Discovery (MLD) snooping IPv6 applications IPv6 host mode IPv6 over Ethernet Dual IPv6/IPv4 stack IPv6 neighbor and router discovery (ND) IPv6 stateless address auto-configuration Path maximum transmission unit (MTU) discovery Duplicate address detection (DAD) Internet Control Message Protocol (ICMP) version 6 IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) support Prioritize IPv6 packets in hardware Deliver IPv6 multicast packets only to the required receivers Web, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), RADIUS, syslog, DNS client IPv6 RFCs supported RFC 2463: ICMP version 6 RFC 3513: IPv6 address architecture RFC 4291: IPv6 addressing architecture RFC 2460: IPv6 specification RFC 2461: Neighbor discovery for IPv6 RFC 2462: IPv6 stateless address auto-configuration RFC 1981: Path maximum transmission unit (MTU) discovery RFC 4007: IPv6 scoped address architecture RFC 3484: Default address selection mechanism RFC 4214: ISATAP tunneling RFC 4293: MIB IPv6: Textual conventions and general group RFC 3595: Textual conventions for IPv6 flow label Management Web user interface Remote Monitoring (RMON) IPv4 and IPv6 dual stack Firmware upgrade Port mirroring VLAN mirroring DHCP (Options 66 and 67) Text-editable config files Built-in switch configuration utility for easy browser-based device configuration (HTTP). Supports configuration, system dashboard, system maintenance, and monitoring Embedded RMON software agent supports one RMON group (statistics) for enhanced traffic management, monitoring, and analysis Coexistence of both protocol stacks to ease migration Web browser upgrade (HTTP) and TFTP Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port. A single session is supported. Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port. A single session is supported. Dynamic Host Configuration Protocol (DHCP) options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download) Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment Smartports Simplified configuration of QoS and security capabilities (available April 2011) Cloud services Localization Other management Support for FindIT Network Discovery Utility Localization of GUI and documentation into multiple languages HTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP,, ping, syslog Power Efficiency Energy Detect Automatically turns off power on Gigabit Ethernet RJ-45 port when the switch detects a link down Active mode is resumed without loss of any packets when the switch detects the link is back up Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter than 10 m. General Jumbo frames MAC table Frame sizes up to 10 KB supported on 10/100 and Gigabit interfaces (9 KB for SG200-08 and SG200-08P) Up to 8000 MAC addresses 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 5 of 10
Feature Discovery Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP- MED extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices, which store the data in an MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones. Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol (available April 2011) Power over Ethernet (PoE) IEEE 802.3af PoE delivered on half of the RJ-45 ports within the listed power budgets Maximum power of 15.4W to any 10/100 or Gigabit Ethernet base port. The total power available for PoE per switch is as follows: Product Ordering Number Model Name Power Dedicated to PoE Number of Ports That Support PoE SLM224PT-xx SF200-24P 100W 12 SLM248PT-xx SF 200-48P 180W 24 SLM2024PT-xx SG200-26P 100W 12 SLM2048PT-xx SG200-50P 180W 24 Power consumption Product Ordering Number Model Name Power Savings Mode Power Consumption: Worst Case Heat Dissipation (BTU/hr) SLM224GT-xx SF200-24 Energy Detect 110V/0.272A/ 13.7W 220V/0.169A/ 14.5W SLM224PT-xx SF200-24P Energy Detect 110V/0.346A/ 21.3W 220V/0.166A/ 22.2W SLM248GT-xx SF200-48 Energy Detect 110V/0.453A/ 26.2W 220V/0.276A/ 26.8W SLM248PT-xx SF 200-48P Energy Detect 110V/0.355A/ 37.2W 220V/0.217A/ 37.4W 49.5 75.8 91.5 127.6 SLM2016T-xx SG200-18 Energy Detect (link down), short reach SLM2024T-xx SG200-26 Short reach plus Energy Detect SLM2024PT-xx SG200-26P Short reach plus Energy Detect SLM2048T-xx SG200-50 Short reach plus Energy Detect SLM2048PT-xx SG200-50P Short reach plus Energy Detect 110V/ P=22.4W 220V/ P=22.9W 110V/0.513A/ 27.8W 220V/0.306A/ 28.3W 110V/0.591A/ 36.8W 220V/0.381A/ 37.5W 110V/0.569A/ 61.8W 220V/0.296A/ 61.4W 110V/0.749A/ 76.4W 220V/0.412A/ 78.3W 78.2 96.6 128.0 209.6 267.2 Ports Product Ordering Number Model Name Total System Ports RJ-45 Ports Combo Ports (RJ-45 + SFP) SLM224GT-xx SF200-24 24 Fast Ethernet 2 Gigabit Ethernet SLM224PT-xx SF200-24P 24 Fast Ethernet 2 Gigabit Ethernet SLM248GT-xx SF200-48 48 Fast Ethernet 2 Gigabit Ethernet SLM248PT-xx SF 200-48P 48 Fast Ethernet 2 Gigabit Ethernet 24 Fast Ethernet 2 Gigabit Ethernet 24 Fast Ethernet 2 Gigabit Ethernet 48 Fast Ethernet 2 Gigabit Ethernet 48 Fast Ethernet 2 Gigabit Ethernet SLM2016T-xx SG200-18 18 Gigabit Ethernet 16 Gigabit Ethernet 2 Gigabit Ethernet SLM2024T-xx SG200-26 26 Gigabit Ethernet 24 Gigabit Ethernet 2 Gigabit Ethernet SLM2024PT-xx SG200-26P 26 Gigabit Ethernet 24 Gigabit Ethernet 2 Gigabit Ethernet SLM2048T-xx SG200-50 50 Gigabit Ethernet 48 Gigabit Ethernet 2 Gigabit Ethernet SLM2048PT-xx SG200-50P 50 Gigabit Ethernet 48 Gigabit Ethernet 2 Gigabit Ethernet 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 6 of 10
Feature Buttons Cabling type LEDs Flash CPU memory Packet buffer Reset button Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T System, Link/Act, PoE, Speed 16 MB (8 MB in SG200-08 and SG200-08P) 128 MB (32 MB in SG200-08 and SG200-08P) All numbers are aggregate across all ports, as the buffers are dynamically shared: Product Ordering Number Model Name Packet Buffer SLM224GT-xx SF200-24 4 Mb SLM224PT-xx SF200-24P 4 Mb SLM248GT-xx SF200-48 2 @ 8 Mb SLM248PT-xx SF 200-48P 2 @ 8 Mb SLM2016T-xx SG200-18 4 Mb SLM2024T-xx SG200-26 4 Mb SLM2024PT-xx SG200-26P 4 Mb SLM2048T-xx SG200-50 2 @ 8 Mb SLM2048PT-xx SG200-50P 2 @ 8 Mb Supported Small Form-Factor Pluggable (SFP) Modules SKU Media Speed Typical Distance MFEFX1 Multimode fiber 100 Mbps 2 km MFELX1 Single-mode fiber 100 Mbps 10 km MFEBX1 Single-mode fiber 100 Mbps 20 km MGBBX1 Single-mode fiber 1000 Mbps 40 km MGBSX1 Multimode fiber 1000 Mbps 300 m MGBLH1 Single-mode fiber 1000 Mbps 40 km MGBLX1 Single-mode fiber 1000 Mbps 10 km Environmental Dimensions (W x H x D) Product Dimension (L x H x W) Product Ordering Number Model Metric (mm) Inches SLM224GT-xx SF 200-24 440 x 44.32 x 257 17.35 x 1.74 x 10.1 SLM224PT-xx SF 200-24P 440 x 44 x 257 17.35 x 1.73 x 10.1 SLM248GT-xx SF 200-48 440 x 44 x 257 17.35 x 1.73 x 10.1 SLM248PT-xx SF 200-48P 440 x 44.32 x 350 17.35 x 1.74 x 13.8 SLM2016T-xx SG 200-18 440.6 x 44.32 x 202.82 17.35 x 1.74 x 7.99 SLM2024T-xx SG 200-26 440 x 44 x 257 17.35 x 1.73 x 10.1 SLM2024PT-xx SG 200-26P 440 x 44 x 257 17.35 x 1.73 x 10.1 SLM2048T-xx SG 200-50 440 x 44 x 257 17.35 x 1.73 x 10.1 SLM2048PT-xx SG 200-50P 440 x 44 x 350 17.35 x 1.73 x 13.8 Unit weight Product Weight Product Ordering Number Model Kilograms Pounds SLM224GT-xx SF 200-24 3.04 6.70 SLM224PT-xx SF 200-24P 3.45 7.61 SLM248GT-xx SF 200-48 3.42 7.54 SLM248PT-xx SF 200-48P 4.73 10.43 SLM2016T-xx SG 200-18 2.01 4.43 SLM2024T-xx SG 200-26 3.27 7.21 SLM2024PT-xx SG 200-26P 3.82 8.42 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 7 of 10
Feature SLM2048T-xx SG 200-50 3.96 8.73 SLM2048PT-xx SG 200-50P 5.47 12.06 Power Product Ordering Number (SKU) Model Power SLM224GT-xx SF200-24 100V 240V, 12V/2.5A, 50 60 HZ SLM224PT-xx SF200-24P 100V 240V, 12V/2.5A, 50 60 HZ 100V 240V, 50V/2A, 50 60 HZ SLM248GT-xx SF200-48 100V 240V, 12V/4.5A, 50 60 HZ SLM248PT-xx SF 200-48P 100V 240V, 50V/3.6A, 12V/4A, 50 60 HZ SLM2016T-xx SG200-18 100V 240V, 1.0 0.5A, 50 60 HZ SLM2024T-xx SG200-26 100V 240V, 12V/2.5A, 50 60 HZ SLM2024PT-xx SG200-26P 100V 240V, 12V/2.5A, 50 60 HZ 100V 240V, 50V/2A, 50 60 HZ SLM2048T-xx SG200-50 110V 240V, 12V/8.33A, 50 60 HZ SLM2048PT-xx SG200-50P 110V-240V, 12V/8.5A, 50-60 HZ 100V-240V, 50V/2A, 50-60 HZ Certification Operating temperature Storage temperature Operating humidity Storage humidity UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A (FCC Class B for SG200-08 and SG200-08P) 32 to 104 F (0 to 40 C) 4 to 158 F ( 20 to 70 C) 10% to 90%, relative, noncondensing 10% to 90%, relative, noncondensing Acoustic noise and mean time between failures (MTBF) Product Ordering Number Model Name Fan (Number) Acoustic Noise MTBF @ 40 C (hours) SLM224GT-xx SF200-24 No N/A 414,166 SLM224PT-xx SF200-24P 1 40.2 db 307,098 SLM248GT-xx SF200-48 No N/A 267,865 SLM248PT-xx SF 200-48P 2 41.7 db 174,966 SLM2016T-xx SG200-18 No N/A 68,033 SLM2024T-xx SG200-26 No N/A 194,278 SLM2024PT-xx SG200-26P 1 40.2 db 218,842 SLM2048T-xx SG200-50 2 41.7 db 237,610 SLM2048PT-xx SG200-50P 4 30 C =42.5 db 40 C =54.7 db 208,976 Warranty Limited lifetime Package Contents Cisco 200 Series Smart Switch Power cord (power adapter for 8-port SKUs) Mounting hardware CD-ROM with user documentation (PDF) included Quick-start guide Minimum Requirements Web browser: Mozilla Firefox version 2.5 or later; Microsoft Internet Explorer version 6 or later Category 5 Ethernet network cable TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 8 of 10
Ordering Information Table 2 provides ordering information for the Cisco 200 Series Switches. Table 3 gives ordering information for the MFE and MGE transceivers. Table 2. Cisco 200 Series Switches Ordering Information Model Name Product Ordering Number Fast Ethernet SLM224GT-xx SF200-24 24 10/100 ports SLM224PT-xx SF200-24P 24 10/100 ports PoE SLM248GT-xx SF200-48 48 10/100 ports SLM248PT-xx SF 200-48P 48 10/100 ports PoE SLM248GT-xx SF200-48 48 10/100 ports Gigabit Ethernet SLM2016T-xx SG200-18 16 10/100/1000 ports SLM2024T-xx SG200-26 24 10/100/1000 ports SLM2024PT-xx SG200-26P 24 10/100/1000 ports PoE SLM2048T-xx SG200-50 48 10/100/1000 ports SLM2048PT-xx SG200-50P 48 10/100/1000 ports *Each mini-gbic port has one 10/100/1000 Ethernet port and one mini-gbic/sfp Gigabit Ethernet slot, with one port active at a time. PoE Table 3. MFE and MGE Transceiver Ordering Information Product Ordering Number MFE Transceivers MFEBX1 MFELX1 MFEFX1 100BASE-BX-20U SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 20 km 100BASE-LX SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 2 km 100BASE-FX SFP transceiver for multimode fiber, 1310 nm wavelength, supports up to 10 km MGE Transceivers MGBBX1 MGBLH1 MGBLX1 MGBSX1 1000BASE-BX-20U SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 40 km 1000BASE-LH SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 40 km 1000BASE-LX SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 10 km 1000BASE-SX SFP transceiver for multimode fiber, 850 nm wavelength, supports up to 550 m 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 9 of 10
A Powerful Foundation for the Basic Business Network As you strive to make your business more competitive and efficient, every dollar counts. Cisco 200 Series Switches give you just the right the features, performance, and reliability you need, without making you pay for advanced features you don t. With Cisco 200 Series switches, you can rest assured that your business applications and communications tools are resting on a strong technology foundation, so you can focus on achieving your business goals. For More Information To find out more about Cisco 200 Series Switches, visit www.cisco.com/go/200switches. To learn about other products and solutions in the Cisco Small Business portfolio, visit www.cisco.com/go/smallbusiness. Printed in USA C78-634369-00 11/10 2010 Cisco and/or its affiliates. All rights reserved.this document is Cisco Public Information. Page 10 of 10