AS/NZS ISO 9004:2011. Managing for the sustained success of an organization A quality management approach AS/NZS ISO 9004:2011

Similar documents
AS/NZS ISO 9001:2008 Quality management systems Requirements (Incorporating Amendment No. 1)

Australian Standard. Guidelines for quality management system documentation AS ISO ISO/TR 10013:2001 AS ISO 10013

Australian Standard. Quality management systems Guidelines for configuration management AS ISO ISO 10007:2003 AS ISO 10007

Australian Standard. Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) AS ISO AS ISO

This is a free 9 page sample. Access the full version online. AS/NZS ISO 31000:2009 Risk management Principles and guidelines

Australian/New Zealand Standard

Australian/New Zealand Standard

This is a free 9 page sample. Access the full version online. AS/NZS ISO 31000:2009 Risk management Principles and guidelines

Australian/New Zealand Standard

Australian Standard. Customer satisfaction Guidelines for complaints handling in organizations (ISO 10002:2004, MOD) AS ISO

Australian Standard. Information technology Service management. Part 2: Guidance on the application of service management systems

AS/NZS 4801:2001. Occupational health and safety management systems. Specification with guidance for use. Australian/New Zealand Standard

Australian/New Zealand Standard

Australian/New Zealand Standard

Australian/New Zealand Standard

Australian Standard. Standard metamodel for software development methodologies AS AS

Australian Standard. Emergency control organization and procedures for buildings, structures and workplaces AS

This is a free 15 page sample. Access the full version online.

Australian/New Zealand Standard

AS AS Australian Standard. Emergency eyewash and shower equipment. This is a free 6 page sample. Access the full version online.

Australian/New Zealand Standard

Australian Standard. Bridge design. Part 1: Scope and general principles AS AP-G15.1/04 AS

Australian/New Zealand Standard

Australian/New Zealand Standard

Australian/New Zealand Standard

Australian Standard. Intruder alarm systems. Part 1: Systems installed in client s premises AS

Software configuration management plans

Australian Standard. Interactive voice response systems user interface Speech recognition AS AS

Australian Standard. General conditions of contract for design and construct. AS (Incorporating Amendment No. 1)

AS AS Australian Standard. Health Care Client Identification. This is a free 8 page sample. Access the full version online.

ISO 9001: 2008 Boosting quality to differentiate yourself from the competition. xxxx November 2008

Asset Plus user guide and FAQs

BUSINESS CONTINUITY MANAGEMENT

Quality Assurance. Policy P7

ISO 9001:2008 Quality Management System Requirements (Third Revision)

Australian Standard. Intruder alarm systems. Part 4: Wire-free systems installed in client s premises AS

august09 tpp Internal Audit and Risk Management Policy for the NSW Public Sector OFFICE OF FINANCIAL MANAGEMENT Policy & Guidelines Paper

STANDARDS AUSTRALIA/STANDARDS NEW ZEALAND. Committee CE-001 Parking Facilities DRAFT. Australian/New Zealand Standard

Australian Standard. Guide to lead paint management. Part 2: Residential and commercial buildings AS

This document is a preview generated by EVS

DRAFT SAINT LUCIA NATIONAL STANDARD DNS/ISO 9001 QUALITY MANAGEMENT SYSTEMS REQUIREMENTS [ISO 9001: 2015, IDT]

Australian Transport Council. National Standard for the Administration of Marine Safety SECTION 4 SURVEYS OF VESSELS

Best Practice Board Reporting

SEPT EVIDENCE PRODUCT CHECKLIST For ISO Standard 9004:2009 Managing for the sustained success of an organization A quality management approach

Australian Work Health and Safety Strategy Healthy, safe and productive working lives

NZS 3910:2013. Conditions of contract for building and civil engineering construction NZS 3910:2013. New Zealand Standard

This document is a preview generated by EVS

Application of ISO/IEC for the Accreditation of Food Safety Management Systems (FSMS) Certification Bodies

Systems and software engineering Lifecycle profiles for Very Small Entities (VSEs) Part 5-6-2:

GUIDANCE MATERIAL GUIDANCE ON THE USE OF POSITIVE PERFORMANCE INDICATORS TO IMPROVE WORKPLACE HEALTH AND SAFETY

INTERNATIONAL STANDARD

IT service management

REHABILITATION MANAGEMENT SYSTEM AUDIT TOOL

DEUTSCHE NORM June Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178

IT Security Management

Quick Guide: Meeting ISO Requirements for Asset Management

Asset Management Systems Scheme (AMS Scheme)

Writing and marking instruments Specification for caps to reduce the risk of asphyxiation

COMMUNICATIONS ALLIANCE LTD DOCUMENT MAINTENANCE POLICY AND PROCESS

HB A Practitioners Guide to Business Continuity Management

ISO/TS 16949:2009 Changes

AEROSPACE STANDARD. Quality Management Systems - Requirements for Aviation, Space and Defense Organizations RATIONALE

International Workshop Agreement 2 Quality Management Systems Guidelines for the application of ISO 9001:2000 on education.

ISO What to do. for Small Businesses. Advice from ISO/TC 176

Workplace first aid kits

Memorandum of Understanding between the NSW Ministry of Health and Sydney Water Corporation

Qualification details

This document is a preview generated by EVS

Records Disposal Schedule Anti-Discrimination Services Northern Territory Anti-Discrimination Commission

Joint Statement of Principles for Professional Accreditation

Fraud and Corruption Control

Grain Trade Australia

INTERNATIONAL STANDARD

Reporting Service Performance Information

The Seismic Assessment of Existing Buildings

NZS 4512:2010. New Zealand Standard. Fire Detection and Alarm Systems in Buildings. Superseding NZS 4512:2003 NZS 4512:2010

Information Management Responsibilities and Accountability GUIDANCE September 2013 Version 1

ISO 9001:2015 Revision overview

Records and Document Management

INTERNATIONAL STANDARD

Transcription:

AS/NZS ISO 9004:2011 Joint Australian/New Zealand Standard Managing for the sustained success of an organization A quality management approach AS/NZS ISO 9004:2011

AS/NZS ISO 9004:2011 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee QR-008, Quality Systems. It was approved on behalf of the Council of Standards Australia on 10 August 2011 and on behalf of the Council of Standards New Zealand on 18 July 2011. This Standard was published on 29 August 2011. The following are represented on Committee QR-008: Airways New Zealand Association of Accredited Certification Bodies Australian Chamber of Commerce and Industry Australian Industry Group Australian Information Industry Association Australian Institute of Petroleum Australian Organisation for Quality Bureau of Steel Manufacturers of Australia Commonwealth Department of Transport and Regional Services Department of Agriculture, Fisheries and Forestry (Commonwealth) Department of Defence, Australia Department of Housing. NSW Department of Industry, Tourism and Resources (Commonwealth) Department of Transport and Main Roads, Qld Energy Networks Association Engineers Australia International Accreditation Forum Joint Accreditation System of Australia and New Zealand Master Builders Australia Materials Australia New Zealand Organisation for Quality Plastics and Chemicals Industries Association Pressure Equipment Association RABQSA International The Royal Australian Chemical Institute University of Technology, Sydney Keeping Standards up-to-date Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. Detailed information about joint Australian/New Zealand Standards can be found by visiting the Standards Web Shop at www.saiglobal.com.au or Standards New Zealand web site at www.standards.co.nz and looking up the relevant Standard in the on-line catalogue. For more frequent listings or notification of revisions, amendments and withdrawals, Standards Australia and Standards New Zealand offer a number of update options. For information about these services, users should contact their respective national Standards organization. We also welcome suggestions for improvement in our Standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. Please address your comments to the Chief Executive of either Standards Australia or Standards New Zealand at the address shown on the back cover. This Standard was issued in draft form for comment as DR AS/NZS ISO 9004.

AS/NZS ISO 9004:2011 Australian/New Zealand Standard Managing for the sustained success of an organization A quality management approach Originated in Australia as AS 3904 1987/ISO 9004:1987. Originated in New Zealand as NZS 5600.2:1987. Previous edition AS/NZS ISO 9004:2000. Third edition 2011. COPYRIGHT Standards Australia Limited/Standards New Zealand All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher, unless otherwise permitted under the Copyright Act 1968 (Australia) or the Copyright Act 1994 (New Zealand). Jointly published by SAI Global Limited under licence from Standards Australia Limited, GPO Box 476, Sydney, NSW 2001 and by Standards New Zealand, Private Bag 2439, Wellington 6140. ISBN Print 978-1-86975-230-9 ISBN PDF 978-1-86975-231-6

ii ii PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee QR-008, Quality Systems, to supersede AS/NZS ISO 9004:2000, Quality management systems Guidelines for performance improvements. The objective of this Standard is to endorse and make more freely available the latest version of this important ISO text. This Standard is identical with, and has been reproduced from ISO 9004:2009, Managing for the sustained success of an organization A quality management approach. As this Standard is reproduced from an international standard, the following applies: (a) Its number appears on the cover and title page while the international standard number appears only on the cover. (b) (c) In the source text this International Standard should read this Australian/New Zealand Standard. A full point substitutes for a comma when referring to a decimal marker. References to International Standards should be replaced by references to Australian or Australian/New Zealand Standards, as follows: Reference to International Standard ISO 9000 Quality management systems Fundamentals and vocabulary Australian/New Zealand Standard AS/NZS ISO 9000 Quality management systems Fundamentals and vocabulary The term informative has been used in this Standard to define the application of the annex to which it applies. An informative annex is only for information and guidance.

Contents iii iii CONTENTS Page Foreword...iv Introduction...v 1 Scope...1 2 Normative references...1 3 Terms and definitions...1 4 Managing for the sustained success of an organization...1 4.1 General...1 4.2 Sustained success...2 4.3 The organization's environment...2 4.4 Interested parties, needs and expectations...3 5 Strategy and policy...3 5.1 General...3 5.2 Strategy and policy formulation...3 5.3 Strategy and policy deployment...4 5.4 Strategy and policy communication...5 6 Resource management...5 6.1 General...5 6.2 Financial resources...6 6.3 People in the organization...6 6.4 Suppliers and partners...7 6.5 Infrastructure...8 6.6 Work environment...9 6.7 Knowledge, information and technology...9 6.8 Natural resources...10 7 Process management...11 7.1 General...11 7.2 Process planning and control...11 7.3 Process responsibility and authority...12 8 Monitoring, measurement, analysis and review...12 8.1 General...12 8.2 Monitoring...12 8.3 Measurement...13 8.4 Analysis...16 8.5 Review of information from monitoring, measurement and analysis...16 9 Improvement, innovation and learning...17 9.1 General...17 9.2 Improvement...17 9.3 Innovation...18 9.4 Learning...19 Annex A (informative) Self-assessment tool...20 Annex B (informative) Quality management principles...38 Annex C (informative) Correspondence between ISO 9004:2009 and ISO 9001:2008...43 Bibliography...45 ISO 2009 All rights reserved iii

ISO 9004:2009(E) iv iv Introduction INTRODUCTION This International Standard provides guidance to support the achievement of sustained success for any organization in a complex, demanding, and ever-changing environment, by a quality management approach. The sustained success of an organization is achieved by its ability to meet the needs and expectations of its customers and other interested parties, over the long term and in a balanced way. Sustained success can be achieved by the effective management of the organization, through awareness of the organization's environment, by learning, and by the appropriate application of either improvements, or innovations, or both. This International Standard promotes self-assessment as an important tool for the review of the maturity level of the organization, covering its leadership, strategy, management system, resources and processes, to identify areas of strength and weakness and opportunities for either improvements, or innovations, or both. This International Standard provides a wider focus on quality management than ISO 9001; it addresses the needs and expectations of all relevant interested parties and provides guidance for the systematic and continual improvement of the organization's overall performance. An extended model of a process-based quality management system incorporating the elements of ISO 9001 and ISO 9004 is given in Figure 1. Key Information flow Value-adding activities Figure 1 Extended model of a process-based quality management system ISO 2009 All rights reserved v

ISO 9004:2009(E) v v This International Standard has been developed to maintain consistency with ISO 9001 and be compatible with other management system standards. Such standards complement each other, but can also be used independently. Annex A provides a tool for organizations to self-assess their own strengths and weaknesses, to determine their level of maturity, and to identify opportunities for improvement and innovation. Annex B provides a description of the quality management principles that are the basis of the quality management standards prepared by ISO/TC 176. Annex C gives a clause by clause correspondence between ISO 9001:2008 and this International Standard. vi ISO 2009 All rights reserved

vi vi NOTES

1 1 AUSTRALIAN/NEW ZEALAND STANDARD Managing for the sustained success of an organization A Managing quality management for the sustained approach success of an organization A quality management approach 1 Scope This International Standard provides guidance to organizations to support the achievement of sustained success by a quality management approach. It is applicable to any organization, regardless of size, type and activity. This International Standard is not intended for certification, regulatory or contractual use. 2 Normative references The following referenced documents relate to the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 9000, Quality management systems Fundamentals and vocabulary 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 9000 and the following apply. 3.1 sustained success organization result of the ability of an organization to achieve and maintain its objectives in the long term 3.2 organization's environment combination of internal and external factors and conditions that can affect the achievement of an organization's objectives and its behaviour towards its interested parties 4 Managing for the sustained success of an organization 4.1 General To achieve sustained success, top management should adopt a quality management approach. The organization's quality management system should be based on the principles described in Annex B. These principles describe concepts that are the foundation of an effective quality management system. To achieve sustained success, top management should apply these principles to the organization's quality management system. The organization should develop the organization's quality management system to ensure the efficient use of resources, ISO 2009 All rights reserved 1 COPYRIGHT

AS/NZS ISO 9004:2011 Managing for the sustained success of an organization - A quality management approach This is a free sample only. Purchase the full publication here: http://shop.standards.co.nz/catalog/9004%3a2011%28as%7cnzs+iso%29/view Or contact Standards New Zealand using one of the following methods. Freephone: 0800 782 632 (New Zealand) Phone: +64 4 498 5990 Fax: +64 4 498 5994 Email enquiries@standards.co.nz