Control Panel Data Sheet Designed and built with motion control in mind, our combined HMI/PLC's feature an array of programming functions with a large memory capacity & fast scan times. The HMI has a user-friendly Touch Screen. Free HMI & PLC programming software and all manuals are supplied on a USB memory stick. Key motion control features include pulse outputs for stepper or servo motor control, high speed 32 bit counter inputs and Fast Interrupt. Performance Data Main Unit Types MCP-XMP2-32R/T-C MCP-XMP3-18T-C Program's Execute Format Loop scan format, time scan format Program Format Use both instruction list and ladder Speed 0.5µs Memory Flash ROM and Li battery Program Capacity Input 16 points Input 8 points Input 18 points Output 16 points Output 10 points Output 14 points System Maximum I/O Points 1024 points Interior Coil Points (M) 8000 points (M0~M7999) Counter Flash ROM 30,000 steps Max I/O of Main Unit Timer MCP-XC5-32T-C Points 620 points (T0~T619) 100ms timer: set time 0.1~3276.7s (T0~T99), with memory (T100~T199) 10ms timer: set time 0.01~327.67s (T200~T299), with memory (T300~T399) 1ms timer: set time 0.001~327.67s (T400~T499), with memory (T500~T599) precise time: (T600~T619) Points 634 points (C0~C633) 16 bits register: the set value: -32768~32767 (C0~C299) 32 bits counter: the set value: -2147483648~2147483647 (C300~C599) Data Register (D) 8000 words (D0~D7999) MCP- XMP3-18T- C MCP- XMP3-18T- C PLC 10 digital inputs, 8 digital outputs. (4 relay & 4 transistor) Additional I/O modules can be connected 2 high- speed, 32 bit counter inputs (2- phase) up to 200kHz 2 pulse outputs for stepper or servo motor control up to 400kHz Fast interrupt Floating Point Math 24Vdc MCP- MCP- XMP3-18T- C HMI LCD display: 192x64 pixels 3.7 (touch screen) 26 keys that can be assigned to any function Dimensions 172mm x 121mm x 57mm
MCP- XMP2-32R/T- C MCP- XMP2-32R/T- C PLC 16 digital inputs, 16 digital outputs. Additional I/O modules can be connected 2 high- speed 32 bit counter inputs (2- phase) 2 pulse outputs for stepper or servo motor control up to 400kHz Fast interrupt Floating Point Math 24Vdc MCP- XMP2-32R/T- C HMI 265 true colour TFT LCD 480x234 pixels 7 (touch screen) 26 keys that can be assigned to any function Dimensions 214mm x 200mmx x 60mm MCP- XC5-32T- C I/O Module PLC 18 digital Inputs, 14 digital outputs 3 high- speed 32 bit counter inputs (2- phase) up to 200kHz 4 pulse outputs for stepper or servo motor control up to 400kHz Fast interrupt Floating Point Math Dimensions 193mm x 102mm x 74mm 24Vdc More Performance Data Main Unit Types MCP-XMP2-32R/T-C MCP-XMP3-18T-C MCP-XC5-32T-C) Special Coil (M) 512 points (M8000~M8511) Special Register (D) 512 words (D8000~D8511) High-Speed Count Format/external Interrupt Three types of high speed count format (single phase, double phases, AB phase), 2 types external interruption (Rising edge, falling edge) Time Scan Settings 0-99mS Interval Calendar Clock Year/month/date/hour/minute/second/week High Speed Count/interrupt Max 6 routes 200K/24 segments Password Protection 6 bits length ASCII Self-diagnose Function Power-on self check, monitor timer, grammar check General Type True colour TFT or green/blue LCD Lifetime Up to 50000 hours, ambient temperature 25ºC, 24 hours working Display Area 480*234 TFT true colour 192*64 LCD Brightness SET Can adjusted Character Setting English Character's Size Various Button Number Memory Interface Screen 4MB Data 265KB SRAM Download Port Electric 28 64KB 4KB SRAM RS232/RS485 Input Voltage 24V DC Voltage Range 20V DC ~28V DC Current Consumption <200mA
Environment Power Drop Anti-voltage Impulse Insulation Resistance Below 10ms (the actual power drop is less than 1 sec.) Up to AC1000V, 29mA, less than 1 min. Up to 10M, DC500V Working Temperature 0ºC~ 50ºC Storage Temperature -20ºC ~ 60ºC Humidity Noise 10%RH - 90%RH (No dew) Interfere voltage: 1500Vp-p, pulse cycle: 1µs, Retentive time: 1 minute Atmosphere No condensation Structure Cooling Method Ambient air cooling Technical Specifications Insulation Voltage DC500V, up to 2MΩ Ambient Temperature 0ºC ~ 60ºC Anti-noise 1000V 1µs pulse Ambient Humidity 5~95% Long-distance Port CAN bus Installation Terminal screws or flying leads COM1 RS -232C, connects with host machine, HMI program or debug COM2 RS-485, connect with network or intelligent instruments, inverters etc. COM3 BD expansion, RS-485 Grounding Star point earth Physical Specifications (in mm)
Screen Shot of plc programming software Program Functions
Screen Shot of HMI Programming Software Schematic Example of Stepping Motor Connection