2009 South American Users Conference Costão do Santinho Resort - Florianópolis, SC - Brazil 10-13 November 2009 PROGRAM Image: Courtesy_NAVATEK_LTD Sponsors: accelera ng results TM
2009 South American Users Conference uu WELCOME Smart Engineering Simulation Simulation Driven Product Development is increasingly present in the daily life of engineers, designers and researchers. Based on reliable methods of mathematical modeling, technologies help these professionals to improve products, optimize processes and reduce development cycles and costs. The most traditional forum for the exchange of ideas about Structural (FEA) and Computational Fluid Dynamics (CFD) in South America will include this year the benefits of using Ansoft tools for Electronic Design Automation (EDA). At this conference you will discover how innovative companies, universities and R&D centers have been using simulation to improve their engineering designs resulting in better products and processes. 10-13 NOVEMBER - FLORIANÓPOLIS, SC/BRAZIL uu KEYNOTE SPEAKERS Technical Speakers Management Tracks Walter Rauen de Souza President Ciber Equipamentos Rodoviários Ltda. Donizete C. Santos President SKF do Brasil Luiz Carlos Largura Jr. Equipment Engineer CENPES/ Arnaldo Camarão Product Development Manager ArvinMeritor Miguel Mattar Neto Research and Technology Deputy Manager IPEN-CNEN/SP International Speakers Paul Galpin Chief Technologist, Fluid Systems, Inc. Markus Kopp Senior Application Specialist HF Products, Inc. Nader Fateh VP Business Development ESTECO NA Sriram Ramanathan Sales Manager, Americas DEM Solutions Martin Faber Sales Manager CEI Fernando Toste Equipments Engineering Coordinator Technip
2009 South American Users Conference uu conference at-a-glance uu NOVEMBER 10 7:30 Registration Open 8:30 advanced training 10:00 REFRESHMENTS IN EXHIBITION AREA 10:20 advanced training 12:00 LUNCH 13:30 advanced training 15:50 advanced training 18:00 end of 1 st day uu NOVEMBER 11 8:00 advanced training 10:00 plenary session 12:10 lunch 13:30 plenary session 16:00 technical sessions 18:00 end of 2 nd day uu NOVEMBER 12 8:00 advanced training technical topics 10:20 plenary session 12:10 lunch 13:30 plenary session 16:00 technical sessions 18:00 end of 3 rd day uu NOVEMBER 13 8:00 technical topics 10:20 technical sessions 12:10 closing lunch
2009 South American Users Conference uu ADVANCED TRAINING - November 10-12 The Full System EMI/EMC Methodology using Ansoft Tools A student will learn which tools are needed to perform EMI/EMC analysis, and what part they play in the methodology. Additionally, a student will gain knowledge in how to properly create the necessary simulations and how to incorporate multiple simulation results into a final full system simulation. To accomplish the above, a student will obtain a basic understanding of how to create and solve simulations in SIwave, Ansoft Designer and HFSS. Additionally a student will gain knowledge of how to dynamically link different simulation together and how to use the push excitations function in Ansoft Designer. Specifically, a student will learn how: to import a board file, setup, and solve an SIwave model; to dynamically link an SIwave model to Ansoft Designer, apply time based excitations to the linked model, and use the push excitation feature; to create an EMI plot in SIwave; to import a board housing and/or create an HFSS model and what the various excitations and boundaries are; to link data from SIwave into HFSS; to create an EMI plot in HFSS. Instructor: Markus Kopp,, Inc. Date: November 10 Fee: R$ 950,00 (30% off for academic students) Optimization Techniques using modefrontier This training is recommended for engineers and analysts (both numerical and experimental) interested in learning the fundamental concepts of optimization techniques applied to engineering projects. Topics to be covered during this course include: introductory concepts such as design of experiments (DOE), sensitivity analyses; advanced techniques such as multi-objective optimization algorithms, Robust Design, and meta-modeling. Practical examples are used to illustrate the different course topics, as well as the coupling between modefrontier and other well-known CAE tools. Instructor: Ana Paula Curty Cuco, Date: November 10 Fee: R$ 950,00 (30% off for academic students) Using EDEM for Discrete Element EDEM is the world s first general-purpose CAE tool to use stateof-the-art discrete element modeling technology for the simulation and analysis of particle handling and manufacturing operations. EDEM has a user-friendly GUI including a portfolio of tools for model set up, solver control and analysis of results. Complex models involving irregular particles and complex equipment geometry can be implemented without any programming required. A fully customizable API enables coupling with external models and tools. Topics: DEM (Discrete Element ) Creating and importing geometries Setup, solver, post-processing and basic simulation Contact models, adhesion, cohesion and body forces Import particle templates and moving plane models Using API to write, build, and include a new contact model Instructor: Daniel Nasato, Date: November 10 Fee: Free Registration - (Limited Availability). CFD - Turbomachinery Flow Focuses on the understanding of the phenomena associated with the turbomachinery flow modeling and the appropriated use of these resources in the CFX software. Instructor: Bruno Contessi, Date: November 10-11 Fee: R$ 1.200,00 (30% off for academic students) Mechanical - Advanced Contact and This course is recommended for engineers who want to use to perform analysis on contact models that cannot be readily solved using default settings. Advanced Contact and covers themes from contact stiffness and friction to surface-to-surface, node-to-node and bolt pretension elements on Classic and Workbench platforms. Instructor: Luiz Lima, Date: November 10 to 12 Fee: R$ 1.450,00 (30% off for academic students) APDL Programming - Integrating Workbench and Classic This course is designed to professionals who want to use the advanced resources on the Workbench platform through APDL Programming ( Parametric Design Language). Instructor: Giovanni Teixeira, Schedule: November 10 to 12 Fee: R$ 1.450,00 (30% off for academic students) Mechanical Workbench - Rotordynamics Coriolis Effect and Reference Systems Stationary reference system (Modal, Harmonic, Synchronous Force, Asynchronous Force, Campbell Diagram, Whirl Orbit, Transient ) Rotatory Reference System (Modal, Harmonic ) Bearing Instructor: Fabiano Nunes Diesel, Date: November 10 to 12 Fee: R$ 1.450,00 (30% off for academic students) Electromagnetic of Products using Maxwell Maxwell is the leading electromagnetic field simulation software used for the design and analysis of 3D/2D structures, such as motors, actuators, transformers and other electric and electromechanical devices common to automotive, military/ aerospace, and industrial systems. Based on the Finite Element Method (FEM), Maxwell accurately solves static, frequency-domain and time-varying electromagnetic and electric fields. Instructor: Mateus Bonadiman, Date: November 10 to 12 Fee: R$ 1.450,00 (30% off for academic students)
2009 South American Users Conference uu technical sessions - November 11-13 Users will present how they have applied software to reduce development cycles, improve processes and obtain lower costs in following fields: Oil & Gas Marine & Offshore Industrial Equipments Civil Engineering Electronics Appliances Aerospace Automotive Power Generation Optimization Biotechnology uu technical topics - November 12-13 The Technical Topics provide an inside look at the latest simulation technology and how this technology can be applied to help ensure success. These 25 minutes presentations are offered multiple times during the last two mornings of the conference to offer you flexibility in scheduling your time. uu November 12 technical topics Pre and Post Processing 8:00 CAD Integration and Defeaturing Nicolino Foschini 8:25 Hybrid Meshing using Meshing Henrique Monteiro 8:50 ICEM Multizone Bruno Contessi 9:15 CFD-Post Bruno Contessi Mechanical I Tools: A Better Way to Improve your Structural Fernando Amaral Parametrization and Optimization on Workbench 2: Working with DesignXplorer Maurício Pacheco Considering Friction Heating Effects on a Coupled Thermo-Structural Daniel Boeri Parallel Processing for FEA Users Roberto Silva uu November 13 technical topics Mechanical II 8:00 Solving Large Deflection Problems using Explict STR Ivan Thesi 8:25 Introducing the New Workbench / LS-DYNA Interface for Preprocessing of Explicit Dynamics Ivan Thesi 8:50 Reducing Time with Rigid Dynamics Fabiano Diesel 9:15 Best Practices on Contact Problems Luiz Lima Fluent CFX Electronics Optimization Discrete Element Workbench 12 for Fluent Users Victor Souza Parametric in Fluent Armando Souza FSI 1 way Fluent - Workbench Victor Souza Poliedric Meshes (Comparison in CFD- Post) Armando Souza CFX Solver Manager Henrique Monteiro Using Multi- Configuration in CFX-Pre Bruno Contessi Basic Scripting in CFX Henrique Monteiro FSI - 6 DOF with CFX Bruno Contessi Using HFFS to Design Antennas Mateus Bonadiman Designing Electric Motors using RMxprt and Maxwell Leandro Percebon EMC/EMI Design Using ANSOFT Tools Markus Kopp Using the Multiphysics Approach to Design Electronic Devices Silvia Firmino An introduction to Design Optimization with modefrontier Ana Paula Cuco Design Optimization using Experimental Data and Response Surfaces Ana Paula Cuco Solving Engineering Inverse Problems with modefrontier Ana Paula Cuco Coupling Multiple CAE Tools in a Single Optimization Study Ana Paula Cuco Chute Transfer Simulation Using EDEM Daniel Nasato Chute Transfer Simulation - Cohesive Material Daniel Nasato EDEM- Coupling Daniel Nasato EDEM-CFD Coupling Daniel Nasato
2009 South American Users Conference uu NOVEMBER 10 - Pre-Conference Training 7:30 registration open 8:30 advanced training room Faial Corvo Flores I Flores II Graciosa Santa Maria Cruzeiro do Sul I Cruzeiro do Sul II EMI/EMC Methodology using Ansoft Tools Mechanical Workbench - Rotordynamics Electromagnetic of Products using Maxwell CFD - Turbomachinery Flow Mechanical - Advanced Contact and APDL Programming - Integrating Workbench and Classic Using EDEM for Discrete Element Optimization Techniques using modefrontier 10:00 REFRESHMENTS IN EXHIBITION AREA 10:20 advanced training room Faial Corvo Flores I Flores II Graciosa Santa Maria Cruzeiro do Sul I Cruzeiro do Sul II EMI/EMC Methodology using Ansoft Tools Mechanical Workbench - Rotordynamics Electromagnetic of Products using Maxwell CFD - Turbomachinery Flow Mechanical - Advanced Contact and APDL Programming - Integrating Workbench and Classic Using EDEM for Discrete Element Optimization Techniques using modefrontier 12:00 LUNCH 13:30 advanced training room Faial Corvo Flores I Flores II Graciosa Santa Maria Cruzeiro do Sul I Cruzeiro do Sul II EMI/EMC Methodology using Ansoft Tools Mechanical Workbench - Rotordynamics Electromagnetic of Products using Maxwell CFD - Turbomachinery Flow Mechanical - Advanced Contact and APDL Programming - Integrating Workbench and Classic Using EDEM for Discrete Element Optimization Techniques using modefrontier 15:50 advanced training room Faial Corvo Flores I Flores II Graciosa Santa Maria Cruzeiro do Sul I Cruzeiro do Sul II EMI/EMC Methodology using Ansoft Tools Mechanical Workbench - Rotordynamics Electromagnetic of Products using Maxwell CFD - Turbomachinery Flow Mechanical - Advanced Contact and APDL Programming - Integrating Workbench and Classic Using EDEM for Discrete Element Optimization Techniques using modefrontier 18:00 end of 1 st day
uu NOVEMBER 11 8:00 advanced training room Corvo Flores I Flores II Graciosa Santa Maria Mechanical Workbench - Rotordynamics Electromagnetic of Products using Maxwell CFD - Turbomachinery Flow Mechanical - Advanced Contact and APDL Programming - Integrating Workbench and Classic Plenary session room pico 10:00 OPENING SESSION Clovis Maliska Jr., 10:20 International Speaker Corporate Updade Paul Galpin,, Inc. 11:00 Sponsor Mark Ihimoyan, Microsoft 11:20 International Speaker THE MAGIC OF MAXWELL S EQUATIONS Markus Kopp,, Inc. 12:10 lunch 13:30 Management Track THE SUCCESS OF SKF BASED ON THE TRIAD TECNOLOGY x PROCESSES x PEOPLE Donizete C. Santos, SKF do Brasil 14:00 Technical Speaker THE ENGINEERING KNOWLEDGE MANAGEMENT CHALLENGE IN CAE ANALYSIS Arnaldo Camarão, ArvinMeritor 14:30 Technical Speaker SOFTWARE USAGE IN STRUCTURAL INTEGRITY ASSESSMENT Luiz Carlos Largura Jr., 15:00 International Speaker A Multidisciplinary Approach to Design Optimization Nader Fateh, ESTECO NA technical sessions room Graciosa Santa Maria Corvo Faial Flores I oil & gas I civil I electronics appliances chairman Carlos Fontes 16:00 Implementation of the critical velocity boundary condition for particle-wall interaction in FLUENT s Discrete Phase Model José A. S. Gonçalves, ar 16:20 16:40 17:00 17:20 17:40 Experimental and Computational of Gas Liquid Annular Flow in Horizontal Tubes Lucas de Andrade Kostetzer, On the Large-Eddy Simulation: Recomended Pratices and Advanced Post-Processing Raphael Bacchi, Test Cases for Variable Density Flow Paulo Santochi Pereira da Silva, Poli USP Vortex Identification Criteria on Turbulent Flows Raphael Bacchi, Cyclone Dust Hopper Influence in the Vortex Core Karolline Ropelato, 18:00 end of 2 nd day industrial equipments I Giovanni Teixeira Temperature Distribution in Friction Stir Welding Using the Finite Element Method Mauricio Rangel Pacheco, Numerical for Mechanical and Thermal of Residual Stresses from the Welding Process Thiago Vidal Valente, UnB The Improvement of Pressure Vessels Design through FEA with the Program and the Stress Evaluation Criteria of the ASME Code André Ricardo Beim, Tresca Engenharia Effect of Stress Concentration on the Fatigue Resistance of Two Dual-Phase Steels Juliano de Barros Veloso e Lima, UFOP Use of Finite Element Method in the Study of Notch Effect in the Fatigue Life of Plate Mill S Spindle Luiz Otávio Rocha Peres, USIMINAS Using in the Development of Milling Drives Rafael Rodarte, SEW EURODRIVE Andrés González Breakout Numerical Simulation Mauro Bloch, Mechanical Applications of the Drucker-Prager Constitutive Law Jorge Mario Toro Fernandez, IMPSA Wind LOAD TEST MODELING OF LARGE POLES Paulo Alexandre de Oliveira, LACTEC Numerical of Laboratory Tests with the Anelastic Strain Recovery Method for In-situ Stress Determination Mauro Bloch, Modal & Seismic of a LNG Tank Sebastián Miranda, Metacontrol Ingenieros S.A. Analytical-experimental comparison of numerical dynamic response in pressures of Fluid80 element Andrés González, Mateus Bonadiman Thermal Numerical Simulation in Telecommunication Cabinet Amarildo Tabone Paschoalini, UNESP Ilha Solteira Electronics cooling applications with Icepak 12.0 Silvia Firmino, Development of Water Cut Sensor for Two Phase (Oil and Water) Flow in Pipeline by Microwave in Resonator Cavity Eduardo Scussiato, Simulation of power transformers and reactors using Maxwell Anderson Santos Nunes, WEG Mode Conversion and EMI in a Telecommunications Blade System Markus Kopp, /ANSOFT Antennas design in big structures using HFSS Mateus Bonadiman, Daniel Boeri PC MOUSE REPROJECT USING quasistatic analysis in CAE TOOLS Sergio Antonio Rosa, Instituto Superior Tupy Parameter Identification of Stress-Strain Curves at Constant Rate Obtained from Axial Impact Tests of PVC And PP Samples Rafael Beck, WEG Better Visualization of Helicoidal Springs Modes by Coordinates Change Julio Cesar da Silva, EMBRACO An Implicit Impact Approach in Compressor Components Design Raul Bosco Junior, EMBRACO Evaluation of effective flow and force areas of reed valves using steady state fluid-structure interaction Celso Kenzo Takemori, EMBRACO
uu NOVEMBER 12 8:00 advanced training technical topics room Faial Corvo Graciosa Santa Maria Cruzeiro do Sul I Cruzeiro do Sul IV oil & gas II chairman João Aguirre 16:00 CFD Helps Open Hole Gravel Packing Projects in the Oil Industry João Vicente Martins de Magalhães, 16:20 16:40 17:00 17:20 17:40 Electromagnetic of Products using Maxwell Sand Settling in a Rat-Hole During Horizontal Well Gravel Packing Jairo Zago de Souza, / Evaluation of Momentum Transfer Models for Euler- Euler of Continuous-Disperse Flows Lucilla Coelho de Almeida, Fluid Dynamic Simulation of a Gas Sparged Flotation Tank João Aguirre Oliveira Jr., Improvement of an Optical Oil and Grease Monitoring Device Using the Euler- Lagrange Approach Clarissa Bergman Fonte, of a Demister Device for Gravitational Separator Tanks João Aguirre Oliveira Jr., Mechanical Workbench - Rotordynamics plenary session room pico 10:20 International Speaker Technology Update Paul Galpin,, Inc. 11:20 Sponsor Srinivas Kodiyalam, SGI marine/ offshore II Nicolas Spogis Non-Linear Simulation of the Umbilical Anchoring Device using Cohesive Zone Material Behavior for the Interface Contact Epoxi/Steel Tube Juliano Lanza Conceição, SUBSIN Determination of Stream Efforts in Floating Units using CFD Daniel Fonseca de Carvalho e Silva, VISCOUS DRAG DETERMINATION OF A SHIP MODEL AT LOW FROUDE NUMBERS Humberto de Carvalho Nakanishi, Poli USP A Methodology for the Estimation of Numerical Hydrodynamic and Added Mass Coefficients using CFD Techniques Lucas Froes Cavalcanti, Fluid-Structural in Circular Towers Renato Bertolino Junior, UNESP A Methodology for a Hydrodynamic of a Moonpool structure with Mooring Lines Using the AQWA Product Maira Vargas, Mechanical - Advanced Contact and industrial equipments II Fabiano Diesel Valve Certification - Fabrication & Design Aspects: A Practical Example Carlos Alexandre de Jesus Miranda, IPEN/Conesteel Válvulas e Conexões Industriais Ltda FEM applied to improve the shape of slide gate plate in order to increase performance in continuous casting Herbert A. Dos Santos, Magnesita Refratarios S.A. Best Practices for Development and Improvement of Projects Using Tool at CFD and FEA Wagner da Silva Mariano, CIWAL Assessment of Numerical Models to Represent the Laminated Rotor Core of Electrical Machines Hideraldo Luis V. dos Santos, WEG The Application fo Beam Elements to Solve Contact Problems Marcos Giovani Dropa de Bortoli, EMBRACO LS-DYNA PC of Contact/Impact with High and Low Stiffness Materials in the Numerical Simulation of Nuclear Transportation Packages under 9 m Drop Tests Miguel Mattar Neto, IPEN CNEN/SP APDL Programming Integrating Workbench and Classic civil II/ aerospace Cesareo Siqueira Static modeling of a low power wind turbine Renato Hunter, Universidad de la Frontera Ultimate Resistance of I-Girder Web Panels Subjected to Combined Bending, Shear and Patch Loading Asdrúbal Ayestarán, Albatros Ingeniería Missile Nozzle Coupled-field Simulations Guilherme Pinto Guimarães, Centro Tecnológico do Exército - CTEx and Validation of the Response of Ribbed Panels Subjected to Structural Excitation Using FEM Mario Alejandro González Montenegro, Aerodynamic Improvements in a Aerodesign Carrier Based Aircraft Using Computational Fluid Dynamics Tools Sinjin D. Machado Yano, Poli USP CFD Optimization on FEI SAE Aerodesign Victor Kanehiro Arume de Souza, Centro Universitário da FEI Pre and Post Processing room Graciosa Cruzeiro do Sul I Santa Maria Corvo Faial Cruzeiro do Sul IV power generation I Rodrigo Tasca of Wind Turbine Blade Using 3D CFD and its Comparison with BEM Method Mauro Grioni, IMPSA On the Prediction of Adverse Hydraulic Phenomena in the Intake of Large- Scale Pumps by CFD Simulations Otávio Souza Pires, Promon Engenharia / UFRJ of Energy Consumption in Centrifugal Compressors due to the Misalignment of Impeller and Diffuser Carlos Reuther Siqueira, Transition Process Beginning on a Low Pressure Turbine Blade Rosiane Cristina de Lima, VSE Computational Simulation of the Performance of a Transonic Axial-Flow Compressor Su Jian, UFRJ Validated numerical analysis of a water centrifugal pump Edson Luiz Zaparoli, ITA - Instituto Tecnologico de Aeronautica Mechanical I 11:40 Technical Speaker Post Processing and Visualization with EnSight - Update on EnSight 9.1 and an Introduction to EnSight CFD Martin Faber, CEI 12:10 lunch 13:30 Management Track INNOVATION AND DEVELOPMENT IN CAPITAL GOODS PROJECTS FOR CONSTRUCTION Walter Rauen de Souza, Ciber Equipamentos Rodoviários Ltda. 14:00 Technical Speaker THE STRUCTURAL DESIGN OF NUCLEAR COMPONENTS IPEN DESIGN BY ANALYSIS EXPERIENCE Miguel Mattar Neto, IPEN-CNEN/SP 14:30 Technical Speaker SOFTWARE USAGE IN TECHNIP EQUIPMENTS AND ACCESSORIES DEPARTMENT Fernando Toste, Technip 15:00 International Speaker Recent Advances in Discrete Element Simulations using EDEM Sriram Ramanathan, DEM Solutions technical sessions 18:00 end of 3 rd day advanced tools Roberto Silva Fracture Mechanics Evaluation of a Pipeline Section Using a Combined / Zencrack Finite Element Approach Maira Amanda Vargas, Explicit STR and LS-DYNA, Overview and Applications Ivan Ivanovitsch Thesi Riagusoff, of Composite Structures using 12.0 and the Composites PrePost Module (ACP): an Overview Jean Paul Kabche, Mechanical APDL and WorkBench Integration Roberto Monteiro Basto da Silva, Numerical Coupling Between DEM (Discret Element Method) and FEA (Finite Elements ) Daniel Nasato, Advanced CFD Post-processing Techniques using EnSight Daniel Bruno de Vasconcelos,
uu NOVEMBER 13 8:00 technical topics room Graciosa Santa Maria Corvo Faial Flores I Flores II technical sessions room Graciosa Flores I Santa Maria Corvo Faial Flores II oil & gas III optimization industrial automotive power biotechnology equipments III generation II Rodrigo Ferraz Mauricio Pacheco Regis Ataides Martin Kessler Fernando Amaral chairman Karolline Ropelato 10:20 Minimizing Coke Formation in a Distillation Column Chimney Tray by CFD Alessandra Bastos dos Santos, 10:40 11:00 11:20 11:40 12:00 Mechanical II Fluent CFX Electronics Optimization Discrete Element Removing Coke Fines from Bottom of Fractionator Towers and Knockout Drum using CFD Karolline Ropelato, CFD Simulation of Multiphase Flow in a Sieve Tray of a Distillation Column Joel Gustavo Teleken, Using the Computational Fluid Dynamics to Characterize Permeation Modules using Membranes Luzia Sergina de França Neta, UFRJ CFD Simulation of a Refinery Double-Fire Furnace Raphael Bacchi, Flow Meter Using CFD Ricardo Carrera, 12:20 closing LUNCH Interface to Perform Design of Experiments (DoE) Using e Visual Basic Diego Fernandes Rodrigues, Instituto Superior Tupy Genetic Structural Optimization Applied with Tension, Flexibility and Buckling Constraints Rafael Sommer, TMSA Optimization of an Electrical Coke Furnace Using CFX and modefrontier Ricardo Serfaty, Application of MDO techniques using modefrontier at EMBRAER Juliano Machado Tenorio Cavalcanti, EMBRAER Routine for tracking mode on an optimization problem Julio Cesar da Silva, EMBRACO A New Methodology of Optimization and Numerical Simulation of the Flow Over Turbine Blades Anna Paula de Sousa Parente Rodrigues, UnB Safer and more durable transfer chutes Marcio Zerwes, Martin Engineering EDEM- Applications for Mining Industry Marcello Coelho Sousa, VALE Cold bending of thermally insulated pipes: numerical simulations using Fabiano Diesel, Mathematical and Numerical Simulation of the Multiphase Flow in the Main Trough of a Blast Furnace Ricardo Rezende, Damage of Thermocouple Wells in FCC Risers Using CFD Jairo Zago de Souza, / MATHEMATICAL MODELLING OF GAS INJECTION IN A CONTINUOUS CASTING TUNDISH Clovis R. Maliska, OPTIMIZATION OF BLANKS USED IN COOLING COMPRESSOR COVER WITH LS-DYNA Leonardo Camilo dos Reis, USIMINAS APPLYING FEA TO SOLVE A SUSPENSION TRAILER PROBLEM Daniel Luis Boniatti, SUSPENSYS CFD Study of HVAC System Gustavo Fonseca de Freitas Maia, FIAT Numerical of the SHOT-PEENING applied to Automotive Springs Miguel Angel Calle Gonzales, Poli USP Cavitation Erosion Prediction in Hydraulic Valve José Roberto Clark Reis, BOSCH Welding process analysis applied to brake chamber support of light duty vehicles Giovanni M. Teixeira, Gas flow simulation inside a deck oven Arturo Barrientos, Universidad de Concepción Validation of a Quick Procedure to Estimate Mean Values in Quasi-Periodic Flows: Application to Heat Transfer in Pin-Finned Channels Paulo L. da Cunha Lage, UFRJ Analyses of the Gas Flow in the Inlet Ducts of a Dust Collecting System., Simulation, Measurements and Case Study Renata Favalli, ENFIL Controle Ambiental Thermo-fluid-dynamic analysis in PCI lances Magno Antonio Calil Resende Silveira, USIMINAS Sea Water Biocide Release Optimization at Angra 2 Nuclear Power Plant Roberto Silva de Oliveira, Eletronuclear S.A Simulation of Hydrodynamic Forces that Act In Fixed Wheel Gates using Computational Fluid Dynamics Harley Souza Alencar, ALSTOM The Stress Distribution Influence by Using Bone Cement at Fixation of Endo- Osseus Femoral Stem Prosthesis Carlos Rodrigo de Mello Roesler, Stress Models of Human Long Bones - Analytic and Finite Element Approaches Ivan Thesi Riagusoff, Fatigue of the Colosso RC Implant - Emfils Marco André Argenta, UFPR Simulation of The Mechanical Behavior of Biocompatible Dental Cement Using the Vanderson Deon, UFPR Structural optimization of crop divider floating/ctc model to chopper sugar cane harvester Jorge L. Mangoline Neves, Centro de Tecnologia Canavieira Parameters Identification on Stress x Strain Curve of Polymeric Materials Sensibility Antonio Carlos Guimarães,
2009 South American Users Conference Costão do Santinho Resort and SPA, which is surrounded by crystalline water, which laps upon the shores of the capital of Santa Catarina, is located to the far north of Florianópolis, on Santinho beach. Santinho is one of the most beautiful of all the 42 beaches on the island and is only 35 km (21 miles) from the center. Blessed by the beautiful natural surroundings, Florianópolis offers a fine reference to the quality of life and is synonymous for holidays, sun, fun and beautiful people. The gastronomy in the six restaurants at Costão do Santinho Resort and SPA is a special attraction. The Resort offers a vast choice of culinary options and without a doubt the best restaurants on the island. uu SPECIAL RATES Special daily rate for the 2009 South American Users Conference attendees: Single Room: R$ 291,00 + 6,15% (tax) Double Room: R$ 444,00 + 6,15% (tax) uu RESERVATION A limited number of rooms at reduced rates is being held for attendees at Costao do Santinho Resort. To secure a room, please contact Camila Cintra at América do Sol Tourism and Events. América do Sol Tourism and Events Contato: camila@americadosol.com Telefone: + 55 (48) 3224-7707 Information and Registration : http://www.esss.com.br/events/ansys2009 +55 (48) 3953-0000 / (48) 3953-0056 Organization: