CommScope s FTTX infrastructure solutions are designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, CommScope s FTTX solutions simplify network installation, maintenance and management from the central office/head end to the outside plant. AT 300 Access Terminal Solutions are designed to meet and serve the wide range of customer requirements, providing a robust, user friendly and cost-effective platform for delivering fiber optic service drops in FTTX deployment. Benefits Intelligent Design smart cable management system maximizes performance, prevents damage and allows for future growth. Practical Matches optical node terminal deployment to service request. Future-Proof Supports efficient service deployment, management and technology upgrades. Flexible provides for a wide number of service applications. 1
Access Network Diagram Loop Through Application DISTRIBUTION CABINET DROP CABLE FIBER ACCESS TERMINALS DISTRIBUTION CABLE BRANCH 48 DROP CABLES Multiport Service Terminal (MST) Application 2
8 Non-Metallic Pedestal Features Molded from polypropylene material which is lightweight and non-corrosive The unique, unobtrusive design provides and attractive profile for residential deployments Includes a winter drop access door Provides intuitive, flexible fiber cable management meeting all bend radius specifications Includes grounding for armored cables and toneable conduit Uses standard 216B tools Removing the cover is quick and easy a quarter turn with a can wrench releases the top for immediate access. The cover is self locking Cover can be ordered with either bell jar or condensation venting options Meets GR-13 and NEMA 6 requirements Includes a barrier plate which provides protection against ground moisture and rodents Capacity Accepts up to 96 loose tube or 144 ribbon fibers distribution cable Provides up to six hardened connectorized terminated drops or up to 24 spliced drops* Supports express pass-through or taper splicing Accomodates loose tube or ribbon fiber, dielectric and armored cables Supports 96 or less expressed through buffer tubes *May not reflect actual field practice CommScope recommends 6 drops per tray. 3
10.09 REF 11.19 REF 8.24 REF 30.733 REF 40.66 REF FTTX Solutions 8 Non-Metallic Pedestal Fiber Maximum Distribution Maximum Drop Maximum Drop Panel Type Panel Type Description Splice Trays* Connectors Splice Trays** A Connectorized drop-termination 2 6 2 B Spliced drop-pass through 2 N/A 2 * Splice trays can handle up to 12 heat shrink splices per tray or 2 ribbon heat shrink splices per tray ** CommScope recommends 6 drops per tray 5.540 2.763 26.135 Ordering Information Description Part Number AT 300 8 Non-Metallic Pedestals Pass-through spliced drop only FAT-YNB0012Y0-000G 2 Hardened adapters with pigtails. HS fusion splice FAT-YNA1200Y0-H02G 4 Hardened adapters with pigtails. HS fusion splice FAT-YNA1200Y0-H04G 6 Hardened adapters with pigtails. HS fusion splice FAT-YNA1200Y0-H06G AT 300 8 MST Mounting Pedestal 8 Pedestal with bell jar cover MST-ACC-Y10 8 Pedestal with bell jar cover with grounding MST-ACC-Y10G *Additional configurations available. May require minimum order quantity. 4
11 Non-Metallic Pedestal Features Molded from polypropylene material which is lightweight and non-corrosive The unique, unobtrusive design provides and attractive profile for residential deployments Includes a winter drop access door and drop wire channel standard Provides intuitive, flexible fiber cable management meeting all bend radius specifications Includes grounding for armored cables and toneable conduit Uses standard 216B tools Removing the cover is quick and easy a quarter turn with a can wrench releases the top for immediate access. The cover is self locking Cover can be ordered with either bell jar or condensation venting options Meets GR-13 and NEMA 6 requirements Includes a barrier plate which provides protection against ground moisture and rodents Split base Capacity Accepts up to 144 loose tube or ribbon fiber distribution cable Provides up to eight hardened connectorized terminated drops or up to 24 spliced drops Supports express pass-through or taper splicing Accomodates loose tube or ribbon fiber, dielectric and armored cables Ordering Information Description Ordering Number AT 300 11 Non-Metallic Pedestals Pass-through spliced drop only FAT-ZNB0012Y0-000G 4 Hardened adapters with pigtails. HS fusion splice FAT-ZNA1200Y0-H04G 6 Hardened adapters with pigtails. HS fusion splice FAT-ZNA1200Y0-H06G 8 Hardened adapters with pigtails. HS fusion splice FAT-ZNA1200Y0-H08G AT 300 11 MST Mounting Pedestal 11 Mounting Pedestal MST-ACC-Z11 11 Mounting Pedestal with grounding MST-ACC-Z11G *Additional configurations available. May require minimum order quantity. 5
8 and 10 OEM Non-Metallic Pedestal Features and Benefits Split base allows ease of installation 10 added two unique functions MST splice center takes place of splice case Eliminates cost of splice case and hand hole 10 branch splice panel allows 144 splices (900 micron or higher) Value Added Features CommScope cable management Pedestal meets industry standards Drop cable clamp Grounding features User friendly for technical field Flexible management of buffer tubes Easy to use strength member clamp Ordering Information Description Part Number AT 300 ProForm 8 Non-Metallic Pedestals Pass-through spliced drop only FAT-RNB0012Y0-000G 2 Hardened adapters with pigtails. HS fusion splice FAT-RNA1200Y0-H02G 4 Hardened adapters with pigtails. HS fusion splice FAT-RNA1200Y0-H04G 6 Hardened adapters with pigtails. HS fusion splice FAT-RNA1200Y0-H06G 8 Hardened adapters with pigtails. HS fusion splice FAT-RNA1200Y0-H08G AT 300 ProForm 10 Non-Metallic Pedestals 144 branch splice, spliced drop FAT-JNF1200Y0-000G 2 Hardened adapters with pigtails. HS fusion splice FAT-JNA1200Y0-H02G 10 Hardened adapters with pigtails. HS fusion splice FAT-JNA1200Y0-H10G AT 300 ProForm 8 MST Mounting Pedestal ProForm 8 MST Mounting Pedestal ProForm 8 MST Mounting Pedestal with grounding MST-ACC-RO4 MST-ACC-R04G AT 300 ProForm 10 MST Mounting Pedestal ProForm 10 MST Mounting Pedestal ProForm 10 MST Mounting Pedestal with grounding MST mounting on drop, HS fusion splice on distribution MST-ACC-J04 MST-ACC-J04G FAT-JNG1200Y0-000G *Additional configurations available. May require minimum order quantity. 6
BD4 Metallic Pedestals Features Industry standard BD4 8 metallic pedestal provides access for splice connectorized drops Value Added Features CommScope cable management Pedestal meets industry standards Drop cable clamp Grounding features User friendly for technical field Flexible management of buffer tubes Easy to use strength member clamp 7
FTTX Solutions BD4 Metallic Pedestal 8.62 8.53 Pedestal Cover Insert bulkhead for BD4 and BD5 28.0 Above Grade Level 37.02 Security Fastener Base 9.0 Grade Level Ordering Information Description Ordering Number AT 300 BD4 Metallic Pedestals Pass-through spliced drop only FAT-4NB0012Y0-000G 4 Hardened adapters with pigtails. HS fusion splice FAT-4NA1200Y0-H04G 6 Hardened adapters with pigtails. HS fusion splice FAT-4NA1200Y0-H06G 8 Hardened adapters with pigtails. HS fusion splice FAT-4NA1200Y0-H08G Insert Bulkheads BD4 (no pedestal). Includes fiber management components. FAT-4EB0012Y0-000G BD5 (no pedestal). Includes fiber management components. FAT-5EH1200Y0-000G *Additional configurations available. May require minimum order quantity. 8
Accessories Ordering Information Description Ordering Number Splice Trays 12 fiber AT 300 splice tray FAT-FST-HS01 24 fiber AT 300 splice tray* FAT-FST-HS02 Sealing Kits 8 pedestal sealing kit FAT-ACC-SLKT1 12 pedestal sealing kit FAT-ACC-SLKT2 Mounting stakes Non-metallic 32 mounting stake ProForm/BD 42 mounting stake ProForm/BD 32 mounting stake MST-ACC-Y32S MST-ACC-J42S MST-ACC-J32S Replacement Moisture Barrier Plate Kit** 8 Non-metallic FAT-MBP-Y 11 Non-metallic FAT-MBP-Z 8 ProForm FAT-MBP-R 10 ProForm FAT-MBP-J *24 fiber splices with use of 250 micronfibers **Configured for use with AT 300 cable management systems 9
Ordering Help Guide Capacity (number Number of Moisture Split of drops) Size of cables splice trays barrier plate base Grounding Non-Metallic 8 inch Splice Direct Drop 6 96 fiber 4 Yes No Recommended 8 inch Splice connector/adapter 6 96 fiber 2 Yes No Recommended 8 inch MST 8 n/a None not required No Recommended 11 inch Splice Direct Drop 6 144 fiber 4 Yes Yes Recommended 11 inch Splice Connector/adapter 6 144 fiber 2 Yes Yes Recommended 11 inch MST 8 n/a None not required Yes Recommended OEM ProForm Non-Metallic 8 inch Splice Direct Drop 6 144 fiber 10 Yes Yes Recommended 8 inch Splice connector/adapter 6 144 fiber 5 Yes Yes Recommended 8 inch MST 8 n/a Not required Yes Recommended 10 inch Splice Direct Drop 10 144 fiber 10 No Yes Recommended 10 inch Splice Connector/adapter 10 144 fiber 5 Yes Yes Recommended 10 inch Splice direct Drop 144 Branch 10 144 fiber 14 Yes Yes Recommended 10 inch MST 8 n/a None Not required Yes Recommended 10 inch MST with splicing capabilities 8 144 fiber 5 Yes Yes Recommended BD4 Metallic Pedestals* 8 inch splice only 8 144 fiber 7 No Yes Required 8 inch hardened connectors 6 144 fiber 5 No Yes Required 8 inch non-harded connector 8 144 fiber 5 No Yes Required *Can be sealed with catalog number FAT-ACC-SLKT1 www.commscope.com Visit our website or contact your local CommScope representative for more information. 2015 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. PS-103800.2-AE (11/15) [Revised from 103800.2]