SENYO INDUSTRIAL PC 850MP II AMD Embedded SoC processor platform from G Series II max. 16 GB RAM II max. 1 TB, HDD or SSD (6 Gb/s) II AMD Radeon HD graphics integrated II Dual Gigabit LAN onboard II Trusted Platform Module optional (TPM 1.2 Infineon) II 2 serial ports II Fanless design depending on mainboard
Extended Specs System Form factor Mini ITX chassis Dimensions (W x D x H) 250 x 52 x 191 mm Weight 2 kg Controls, LEDs Controls: power switch Indicators (front): Power LED Indicators (back): NIC activity Recommendations for use Industrial offices Machine control and management Large companies Petrol stations Process visualisation Robotics Data management Industrial automation Test benches and equipment for industrial or security systems Monitoring systems Kiosk solutions or cash systems Chip set Chip set AMD embedded G-series ekabini Processor Max Supported Qty 1 Supported processors Fujitsu Mainboard D3313-S1 Mini- ITX: AMD Embedded GX-210HA SOC (1.0 GHz/9W) Dual Core Fujitsu Mainboard D3313-S2 Mini- ITX: AMD Embedded GX-217HA SOC (1.65GHz/15W) Dual Core Fujitsu Mainboard D3313-S3 Mini- ITX: AMD Embedded GX-420CA SOC (2.0 GHz/25W) Quad Core Main memory
Max. storage capacity Supports up to 16 GB RAM Slots Two 240-pin DDR3 SO-DIMM slots Type Supports 1600 MHz (PC3-12800) / 1866 MHz (PC3-14900) non-ecc, unbuffered DDR3 SO-DIMM memory Restrictions Note for Microsoft Windows systems with 4 GB RAM or above: Depending on the actual system configuration, 32-bit or below operating systems can only use a max. 3-3.5 GB. To utilise 4 GB or more RAM, you need a 64- compatible processor and a 64-bit operating system. Mass storage controller Interfaces 2 x SATA 6.0 Gb/s Mass storage Hard disk drive Max. one 2.5" serial ATA hard disk/ssd (6.0 or 3.0 Gbit/s) Optical memory n/a Card reader n/a Graphics Type AMD Radeon HD 8210E Graphics AMD Radeon HD 8280E Graphics AMD Radeon HD 8400E Graphics
Max. resolution Fujitsu D3313-S1 Display port: 2560x1600 @60Hz / 30bpp DVI: 1600 x 1200 @ 60Hz / 24bpp (single link, 162 MHz, standard timings) 1920 x 1200 @ 60Hz / 24 bpp (single link, 154 MHz, reduced blanking timings) Fujitsu D3313-S2 Display port: 2560x1600 @60Hz / 30 bpp DVI: 1600 x 1200 @ 60Hz / 24 bpp (single link, 162 MHz, standard timings) 1920 x 1200 @ 60 Hz / 24 bpp (single link, 154 MHz, reduced blanking timings) Fujitsu D3313-S3 Display port: 2560x1600 @60Hz / 30bpp DVI: 1600 x 1200 @ 60Hz / 24 bpp (single link, 162 MHz, standard timings) 1920 x 1200 @ 60Hz / 24 bpp (single link, 154 MHz, reduced blanking timings) Sound Type Realtek ALC671 High Definition Audio onboard Network Type Dual Realtek Gigabit-LAN (10/100/1000 Mbits/sec) onboard Data link protocol(supported standards) IEEE 802.3ab Gigabit Ethernet IEEE 802.3 and IEEE 802.3u (Ethernet and Fast Ethernet) IEEE 802.3x with flow control / auto-negotiation
Boot options WoL (Wake-on-LAN) Standard PXE 2.1 (Pre-Boot execution Environment) BootP Bootcode (Bootstrap Protocol) Power on after power loss Extension and ports Slide-ins 1 x internal 2.5" Slot-ins Upgrade is only possible using a riser card: 1 x PCIe x4 Interfaces Fujitsu D3313-S1 Rear ports: DC-In 1 x DVI-I 1 x DP 2 x COM 2 x RJ45 4 x USB 2.0 2 x PS/2 mouse / keyboard Audio (line out, mic in) Front ports: none Internal ports: 2 x USB 2.0 2 x USB 3.0 2 x SATA 6 GBit/s 1 x msata 1 x S/PDIF OUT (digital audio) 1 x USB A socket Fujitsu D3313-S2 Rear ports: DC-In 1 x DVI-I 1 x DP 2 x COM 2 x RJ45 4 x USB 2.0 2 x PS/2 mouse / keyboard Audio (line out, mic in) Front ports: none Internal ports: 2 x USB 2.0 2 x USB 3.0 2 x SATA 6 GBit/s 1 x msata 1 x S/PDIF OUT (digital audio) 1 x USB A socket Fujitsu D3313-S1 mainboard: Rear ports: DC-In 1 x DVI-I 1 x DP 2 x COM 2 x RJ45 4 x USB 2.0 2 x PS/2 mouse / keyboard Audio (line out, mic in) Front ports: none Internal ports: 2 x USB 2.0 2 x USB 3.0 2 x SATA 6 GBit/s 1 x msata 1 x S/PDIF OUT (digital audio) 1 x USB A socket Power supply Type External PSU, 19 V AC adapter, 20V, 3.25A Required voltage 110/240 V AC (50/60 Hz) PFC active Max. output 65 Watt
Software Certified operating systems Microsoft Windows 7 Microsoft Windows 8.1 Microsoft Windows 10 Additional software Microsoft Office 2013 Various Management Advanced Power Management Trusted Platform Module (TPM 1.2 Infineon) Wake on time from S5 System backup Recovery BIOS System and BIOS Password Boot Sequence Control for each drive Serial Port Access Protection Boot Sector Virus Warning Write Protection for Flash BIOS Harddisk Password incl. Silent Password option (no keyboard entry required) Security functions in chassis Designed for a Kensington lock to prevent unauthorized access and theft Other features Maximum stability thanks to industrial design: - Mainboard is optimised for 24x7 operation - Industrial mainboard with special long-life capacitators Ultra stability and reliability - The tin-plated circuit board provides additional protection against corrosion - Max. three years extended lifetime - Two serial interfaces onboard Product certifications CE, EN55022 class A, EN55024, EN 60950 Warranty and service Standard 2-year EXPRESS EXCHANGE service
Optional services 3-year EXPRESS EXCHANGE service 4-year EXPRESS EXCHANGE service 5-year EXPRESS EXCHANGE service 2-year BUSINESS on-site service (NBD) 3-year BUSINESS on-site service (NBD) 4-year BUSINESS on-site service (NBD) 5-year BUSINESS on-site service (NBD) Other services Customer image preinstallation BIOS configuration according to customer demands Hard drive partitioning according to customer demands Individual system configuration Free delivery to location etc. Environmental Parameters Min Operating Temperature 10 C Max Operating Temperature 35 C Humidity Operating Range 8-80% Power consumption (W) Maximum (S0, in operation, CD access) 29 W Average (S0, operating system in idle mode) 7 W Standby (S3, energy-saving mode, WoL activated) 1.5 W Minimum (ACPI status S5, soft off, WoL deactivated) 0.7 W Heat dissipation Maximum (S0, in operation, CD access) 104.40 kj/h - 98.95 BTU/h Average (S0, operating system in idle mode) 25.20 kj/h - 23.88 BTU/h
Standby (S3, energy-saving mode, WoL activated) 5.40 kj/h - 5.12 BTU/h Minimum (ACPI status S5, soft off, WoL deactivated) 2.52 kj/h - 2.39 BTU/h