Product Highlights 10 Gigabit Connectivity High bandwidth uplinks eliminate network bottlenecks and provide low-latency connections for network servers and storage Superior Reliability Per-port surge protection, Ethernet Ring Protection Switching and Redundant Power Supply features maximize service availability and increase uptime Service Provider Features Layer 2 multicast functions allow IPTV streams to be distributed efficiently and security features prevent network abuse DGS-1510/ME Series Metro Ethernet Switches Features Reliable Hardware and Software Features 6 kv Surge Protection for Ethernet Ports Real Time Clock (RTC) Dying Gasp Ethernet Ring Protection Switching (ERPS) Redundant Power Supply (RPS) Support Advanced Switch Features Port-based Q-in-Q VLAN Trunking ISM VLAN (Multicast VLAN) Layer 3 Control Packet Filtering Comprehensive Security Features Access Control Lists (ACLs) D-Link Safeguard Engine BPDU Attack Protection ARP Spoofing Prevention IP-MAC-Port Binding DoS Attack Prevention 802.1X MAC-based Access Control Guest VLAN The DGS-1510/ME Series Metro Ethernet Switches are a family of Ethernet switches ideal for Metro Ethernet applications. They feature a variety of ports, including 10/100/1000BASE-T RJ-45 ports, 1G SFP ports, and 10G SFP+ ports for increased network bandwidth. Surge protection, advanced Layer 2 functions and a suite of security and management tools make the DGS-1510/ME Series Metro Ethernet Switches ideally suited for Metro Ethernet applications. Multi-Gigabit Performance The DGS-1510/ME Series Metro Ethernet Switches come with a variety of port types, including Gigabit Ethernet RJ-45, 1 Gigabit Ethernet SFP ports, or 10 Gigabit Ethernet SFP+ ports. All models offer a minimum of at least 2 Gigabit Ethernet SFP ports. The DGS-1510-28X/ME, DGS- 1510-28XS/ME and DGS-1510-52/ME offer 4 10 Gigabit Ethernet SFP+ ports for improved uplink bandwidth. The DGS-1510-28LP/ME and DGS-1510-28XMP/ME switches feature PoE, allowing compatible devices to be installed in remote locations without immediate access to power outlets. Efficient and Resilient Networking All Ethernet ports in the DGS-1510/ME Series support 6 kv surge protection, protecting the switch from power surges due to lightning strikes or faulty electrical cabling. The switches can be used with a D-Link DPS-500A/DPS-500DC Redundant Power Supply (RPS) or a 12 VDC backup connection to ensure continuous operation. The DGS-1510/ME Series support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS), which allows 50 millisecond failover in the event of a failure of one of the rings, minimizing service disruption. The switches also support IEEE 802.1AX and 802.3ad Link Aggregation, which allows grouping of multiple ports to provide redundancy and load balancing in mission-critical environments. System Management 802.1ag CFM 802.3ah Ethernet Link OAM SNMP v1/v2c/v3 RMON v1/v2 LLDP/LLDP-MED
Triple Play Services The DGS-1510/ME Series Metro Ethernet Switches feature a full suite of Layer 2 multicast functions, including IGMP snooping, IGMP filtering, fast leave, and multicast traffic configuration for specific ports. With L2 multicast support, the DGS-1510/ME Series is ready and capable of handling the growing demand for IPTV applications. Host-based IGMP/MLD Snooping allows for multiple multicast subscribers per physical interface, and an Internet Standard Multicast (ISM) VLAN separates multicast streams in a multicast VLAN, saving bandwidth on the backbone network. The ISM VLAN profiles allow users to bind the predefined multicast registration information to subscriber ports quickly and easily. The DGS-1510/ME Series also supports IGMP authentication, which can prevent rogue IPTV subscriptions by authenticating set-top boxes as well as channel switching to secure Internet Service Provider (ISP) revenues. Quality of Service The DGS-1510/ME Series supports advanced Quality of Service (QoS) functions to help ISPs reliably deliver high-quality triple play services. Flexible packet classification can be based on various header fields or userdefined packet content to help administrators prioritize network traffic. The Bandwidth Control feature allows ISPs to define the upstream/downstream throughput levels for each port with granularity down to 64 Kbps. Robust Maintenance and Troubleshooting The DGS-1510/ME Series feature a complete set of Operations, Administration, and Management (OAM) features to reduce maintenance costs and simplify management. Cable diagnostics display the status of Ethernet cables and allow support staff to detect cable errors remotely, reducing on-site support costs. The 802.3ah Ethernet Link OAM and 802.1ag Connectivity Fault Management (CFM) standards provide administrators with tools to effectively monitor and manage Ethernet networks. This allows service providers to monitor customer connectivity, isolate network issues and optimize network performance. Security & Authentication The DGS-1510/ME Series offer user and device authentication features such as 802.1X port-based access control and MAC address-based access control. This allows devices to be authenticated based on their MAC address, removing the need for client software and ensuring device compatibility. Host-based authentication and authorization provide the option to finely control network access for each device on the network. Advanced features such as RADIUS accounting allow the switches to be integrated with backend systems for billing or advanced access control. The DGS-1510/ME Series support address and interface binding features such as IP-MAC-Port Binding and ARP Spoofing Prevention to protect against Man-in-the-Middle or ARP Spoofing attacks.
DGS-1510-10L/ME DGS-1510-20L/ME DGS-1510-28L/ME DGS-1510-52L/ME DGS-1510-28X/ME DGS-1510-28XS/ME DGS-1510-52X/ME DGS-1510-28LP/ME DGS-1510-28XMP/ME
Technical Specifications Model Number DGS-1510-10L/ME DGS-1510-20L/ME DGS-1510-28L/ME DGS-1510-52L/ME Hardware Version A1 Interface Size 11-inch standard 11-inch standard Interface 8 10/100/1000 Mbps + 2 SFP 16 10/100/1000 Mbps + 4 SFP 24 10/100/1000 Mbps + 4 SFP 48 10/100/1000 Mbps + 4 SFP Console Port Port Standards & Functions Network Cables Full/Half-Duplex Media Interface Exchange RJ-45 Console Port IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3x Flow Control for full-duplex mode, auto-negotiation UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.) Full/half-duplex for 10/100 Mbps and Gigabit speed Auto or configurable MDI / MDIX Performance Switching Capacity 20 Gbps 40 Gbps 56 Gbps 104 Gbps Forwarding Method MAC Address Table Size MAC Address Update Maximum 64-byte Max. Packet Forwarding Rate Store-and-forward Up to 16K entries per device Up to 512 static MAC entries 14.88 Mpps 29.76 Mpps 68.45 Mpps 104.16 Mpps Packet Buffer 1.5 MB per device 3.0 MB per device LEDs Power (per device) Redundant Power Supply (RPS) (per device) Console (per device) Link/Active/Speed (per port) Fan Error Physical/Environmental MTBF 841,608 hours 762,952 hours 635,099 hours 501,290 hours Acoustic N/A 47 db(a) Heat Dissipation 46.405 BTU/h 53.229 BTU/h 60.1 BTU/h 132.99 BTU/h Power Input AC Input: 100 to 240 VAC 50/60 Hz
Maximum Power Consumption 13.6 W 15.6 W 17.6 W 39 W Standby Power Consumption 9.4 W/100 V 9.6 W/240 V 9.8 W/100 V 10.5 W/240 V 10.1 W/100 V 10.6 W/240 V 22.7 W/100 V 22.8 W/240 V Dimensions (W x D x H) 280 x 140 x 44mm 280 x 140 x 44mm 440 x 210 x 44 mm 440 x 210 x 44 mm Weight 1.24 kg 1.42 kg 2.00 kg 2.40 kg Ventilation Fanless 2 x Smart Fan Power Surge Protection Operating Temperature Storage Temperature Operating Humidity Storage Humidity EMI Safety Certifications All Ethernet ports support IEC61000-4-5 6 kv surge protection -5 to 50 C (23 to 122 F) -20 to 70 C (-4 to 158 F) CE, FCC, C-Tick, VCCI, BSMI cul, CB Technical Specifications Model Number DGS-1510-28X/ME DGS-1510-28XS/ME DGS-1510-52X/ME Hardware Version A1 Interface Size Interface 24 10/100/1000 Mbps + 4 10G SFP+ 24 SFP + 4 10G SFP+ 48 10/100/1000 Mbps + 4 10G SFP+ Console Port Port Standards & Functions Network Cables Full/Half-Duplex Media Interface Exchange RJ-45 Console Port IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3ae 10 GbE IEEE 802.3x Flow Control for full-duplex mode, auto-negotiation UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.) Full/half duplex for 10/100 Mbps and Gigabit speed Auto or configurable MDI/MDIX Performance Switching Capacity 128 Gbps 176 Gbps Forwarding Method MAC Address Table Size MAC Address Update Maximum 64-byte Max. Packet Forwarding Rate Store-and-forward Up to 16K entries per device Up to 512 static MAC entries 95.24 Mpps 130.95 Mpps Packet Buffer 1.5 MB per device 3.0 MB per device
LEDs Power (per device) Redundant Power Supply (RPS) (per device) Console (per device) Link/Active/Speed (per port) Fan Error Physical/Environmental MTBF 652,062 hours 574,974 hours 465,240 hours Acoustic 44 db(a) 47.8 db(a) 45.9 db(a) Heat Dissipation 75.361 BTU/h 157.94 BTU/h 145.948 BTU/h Power Input Maximum Power Consumption AC Input: 100 to 240 VAC 50/60 Hz 22.1 W 53.4 W 40.7 W Standby Power Consumption 14.6 W/100 V 15.2 W/240 V 13.0 W/100 V 13.5 W/240 V 28.6 W/100 V 28.9 W/240 V Dimensions (W x D x H) 440 x 210 x 44 mm 440 x 210 x 44 mm 440 x 210 x 44 mm Weight 2.00 kg 2.10 kg 2.40 kg Ventilation 1 x Smart Fan 2 x Smart Fan Power Surge Protection Operating Temperature Storage Temperature Operating Humidity Storage Humidity EMI Safety Certifications All Ethernet ports support IEC61000-4-5 6 kv surge protection -5 to 50 C (23 to 122 F) -20 to 70 C (-4 to 158 F) CE, FCC, C-Tick, VCCI, BSMI cul, CB
Technical Specifications Model Number DGS-1510-28LP/ME DGS-1510-28XMP/ME Hardware Version A1 Interface Size Interface 24 10/100/1000 Mbps PoE + 4 SFP 24 10/100/1000 Mbps PoE + 4 SFP+ Port Standards & Functions Ports 1 to 24 compliant with both 802.3af/802.3at Ports 1 to 24 compliant with both 802.3af/802.3at Console Port Other Port Standards & Functions Network Cables Full/Half-Duplex Media Interface Exchange RJ-45 Console Port IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3ae 10 GbE IEEE 802.3x Flow Control for full-duplex mode, auto-negotiation IEEE 802.3af, 802.3at PoE UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.) Full/half duplex for 10/100 Mbps and Gigabit speed Auto or configurable MDI/MDIX Performance Switching Capacity 56 Gbps 128 Gbps Forwarding Method MAC Address Table Size MAC Address Update Maximum 64-byte Max. Packet Forwarding Rate Packet Buffer Store-and-forward Up to 16K entries per device Up to 512 static MAC entries 68.45 Mpps 95.24 Mpps 1.5 MB per device LEDs Power (per device) Redundant Power Supply (RPS) (per device) Console (per device) Link/Active/Speed (per port) Fan Error Physical/Environmental MTBF 304,565 hours 268,693 hours Acoustic 47.4 db(a) 54.1 db(a) Heat Dissipation 840 BTU/h 1518.132 BTU/h
Power Input AC Input: 100 to 240 VAC 50/60 Hz Maximum Power Consumption 246.5 W (PoE on) 28.4 W (PoE off) 445.2 W (PoE on) 31.8 W (PoE off) Maximum PoE Budget 193 W 370 W Standby Power Consumption 19.5 W/100 V 19 W/240 V 24.5 W/100 V 28.2 W/240 V Dimensions (W x D x H) 440 x 210 x 44 mm 440 x 308 x 44 mm Weight 2.54 kg 4.25 kg Ventilation Power Surge Protection Operating Temperature Storage Temperature Operating Humidity Storage Humidity EMI Safety Certifications 2 x Smart Fan All Ethernet ports support IEC61000-4-5 6 kv surge protection -5 to 50 C (23 to 122 F) -20 to 70 C (-4 to 158 F) CE, FCC, C-Tick, VCCI, BSMI cul, CB Software Specifications (all models) Virtual Stacking L2 Features L2 Multicasting VLAN L3 Features D-Link Single IP Management Up to 32 units per Virtual Stack MAC Address Table: Up to 16K Flow Control 802.3x Flow Control HOL Blocking Prevention Jumbo Frames up to 9216 Bytes Spanning Tree Protocols 802.1D STP 802.1w RSTP 802.1s MSTP BPDU Filtering IGMP Snooping IGMP v1/v2 Snooping, v3 awareness Supports 1024 groups Port/Host-based IGMP Snooping Fast Leave Report Suppression IGMP Authentication Limited IP Multicast (IGMP Filtering) VLAN Group Max. 4094 VLAN Port-based VLAN MAC-based VLAN GVRP Max. 255 dynamic VLANs 802.1v Protocol VLAN Max. 1024 ARP entries Supports 255 static ARP entries Gratuitous ARP IPv6 Neighbor Discovery (ND) 16 IP interfaces Root Restriction Loopback Detection Link Aggregation Compliant with 802.1AX and 802.3ad Port Mirroring Supports 1 Mirroring group Supports One-to-One, Many-to-One, Flow-based (ACL) Mirroring Ethernet Ring Protection Switching (ERPS) L2 Protocol Tunneling (L2PT) MLD Snooping MLD v1, MLD v2 awareness Supports 1024 groups Port/Host-based MLD snooping Fast Leave 802.1Q Tagged VLAN Double VLAN (Q-in-Q) Port-based Q-in-Q ISM VLAN VLAN Translation VLAN Trunking Default Route Static Route 1 64 IPv4 static routes 1 32 IPv6 static routes 1
Quality of Service (QoS) Access Control List (ACL) CoS based on Switch Port 802.1p Priority VLAN ID MAC Address Ether Type IPv4/IPv6 address DSCP ToS Protocol Type TCP/UDP Port IPv6 Traffic Class IPv6 Flow Label User Defined Packet Content ACL based on Switch Port 802.1p Priority VLAN ID MAC Address Ether Type IPv4/IPv6 Address IPv6 Traffic Class IPv6 Flow Label DSCP ToS Protocol Type TCP/UDP Port User-defined Packet Content Bandwidth Control Port-based (Ingress, Min. Granularity 64 Kbps) Flow-based (Ingress, Min. Granularity 64 Kbps) Egress queue bandwidth control (Min. Granularity 64 Kbps) Queue Handling Strict Priority Queue (SPQ) Weighted Round Robin (WRR) SPQ + WRR 8 queues per port Up to 1024 ingress access rules Time-based ACL ACL Statistics CPU Interface Filtering AAA 802.1X Port-based Access Control Host-based Access Control Dynamic VLAN Assignment MAC-based Access Control (MAC) Port-based Access Control Host-based Access Control Dynamic VLAN Assignment Microsoft NAP (IPv4) Guest VLAN RADIUS (IPv4) TACACS (IPv4) TACACS+ (IPv4) XTACACS+ (IPv4) Trusted Host RADIUS Accounting Four-level User Account Security OAM SSH v1/v2 SSL v1/v2/v3 Port Security Up to 64 MAC addresses per port Broadcast/Multicast/Unicast Storm Control IP-MAC-Port Binding (IMPB) ARP Inspection IP Inspection DHCP Snooping DHCPv6 Snooping 1 DHCPv6 Guard 1 IPv6 Route Advertisement (RA) Guard 1 IPv6 ND Snooping 1 IPv6 ND Inspection 1 Cable Diagnostics 802.3ah Ethernet Link OAM Traffic Segmentation D-Link Safeguard Engine L3 Control Packet Filtering NetBIOS/NetBEUI Filtering DHCP Server Screening DHCP Client Filtering ARP Spoofing Prevention BPDU Attack Protection DoS Attack Prevention Dying Gasp 802.1ag Connectivity Fault Management (CFM)
Management Order Information Part Number DGS-1510-10L/ME DGS-1510-20L/ME DGS-1510-28L/ME Web-based GUI (Supports IPv4/v6) Command Line Interface (CLI) Telnet Server/Client (Supports IPv4) TFTP/FTP Client (Supports IPv4) ZModem Command Logging SNMP v1/v2c/v3 (Supports IPv4) SNMP Traps System Log SMTP (IPv4) RMON v1: Supports 1,2,3,9 groups RMON v2: Supports Probe Config group 802.1AB LLDP LLDP-MED BootP/DHCP Client (Supports IPv4) DHCP Auto-Configuration 1 DHCP Relay (Supports IPv4) DHCP Relay Option 60, 61 and 82 DHCP Client Option 12 Description 8 10/100/1000 Mbps ports + 2 SFP ports Metro Ethernet Switch 16 10/100/1000 Mbps ports + 4 SFP ports Metro Ethernet Switch 24 10/100/1000 Mbps ports + 4 SFP ports Metro Ethernet Switch PPPoE Circuit-ID Tag Insertion 1 Multiple Image Flash File System CPU Monitoring Memory Monitoring SNTP (Supports IPv4) Debug Command Password Recovery Password Encryption Ping Traceroute Microsoft NLB (Network Load Balancing) Support (Supports IPv4) Zero Touch Provisioning (ZTP) 1 sflow 1 D-Link Network Assistant 1 DGS-1510-28LP/ME DGS-1510-28X/ME DGS-1510-28XMP/ME DGS-1510-28XS/ME DGS-1510-52L/ME DGS-1510-52X/ME 24 10/100/1000 Mbps PoE ports + 4 SFP ports Metro Ethernet Switch 24 10/100/1000 Mbps ports + 4 10G SFP+ ports Metro Ethernet Switch 24 10/100/1000 Mbps PoE ports + 4 10G SFP+ ports Metro Ethernet Switch 24 SFP ports + 4 10G SFP+ ports Metro Ethernet Switch 48 10/100/1000 Mbps ports + 4 SFP ports Metro Ethernet Switch 48 10/100/1000 Mbps ports + 4 10G SFP+ ports Metro Ethernet Switch Redundant Power Supply and Cable DPS-500A DPS-500DC DPS-CB150-2PS v.b1 140 W Redundant Power Supply (Alternating Current) 140 W Redundant Power Supply (Direct Current) 150 cm RPS cable for connecting the DGS-1510/ME Series with the DPS-500A and DPS-500DC Optional SFP Transceivers DEM-310GT DEM-311GT DEM-312GT2 1000BASE-LX, single-mode, 10 km 1000BASE-SX, multi-mode, 550 m 1000BASE-SX, multi-mode, 2 km
DEM-314GT DEM-315GT DGS-712 1000BASE-LHX, single-mode, 50 km 1000BASE-ZX, single-mode, 80 km 1000BASE-T to SFP transceiver Optional WDM SFP Transceivers DEM-331T DEM-331R DEM-330T DEM-330R DEM-302S-BXD DEM-302S-BXU 1000BASE-LX, wavelength Tx: 1550 nm, Rx: 1310 nm, single-mode, 40 km 1000BASE-LX, wavelength Tx: 1310 nm, Rx: 1550 nm, single-mode, 40 km 1000BASE-LX, wavelength Tx 1550 nm, Rx 1310 nm, single-mode, 10 km 1000BASE-LX, wavelength Tx 1310 nm, Rx 1550 nm, single-mode, 10 km 1000BASE-LX, wavelength Tx:1550 nm Rx:1310 nm, Single-mode, 2 km 1000BASE-LX, wavelength Tx:1310 nm Rx:1550 nm, Single-mode, 2 km Optional SFP+ Transceivers DEM-431XT DEM-431XT-DD DEM-432XT DEM-432XT-DD DEM-433XT DEM-433XT-DD DEM-434XT DEM-436XT-BXD DEM-436XT-BXU 10GBASE-SR SFP+ Transceiver (without DDM), 33 m: OM1 MMF, 82 m: OM2 MMF, 300 m: OM3 MMF 10GBASE-SR SFP+ Transceiver (with DDM), 33 m: OM1 MMF, 82 m: OM2 MMF, 300 m: OM3 MMF 10GBASE-LR SFP+ Transceiver (without DDM), 10 km 10GBASE-LR SFP+ Transceiver (with DDM), 10 km 10GBASE-ER SFP+ Transceiver (without DDM), 40 km 10GBASE-ER SFP+ Transceiver (with DDM), 40 km 10GBASE-ZR SFP+ Transceiver (without DDM), 80 km 10GBASE-LR BiDi SFP+ Transceiver (without DDM), Wavelength Tx 1330 nm, Rx: 1270 nm, 20 km 10GBASE-LR BiDi SFP+ Transceiver (without DDM), Wavelength Tx 1270 nm, Rx: 1330 nm, 20 km Optional 10 Gigabit Ethernet SFP+ Direct Attach Cables (DGS-1510-28X/ME, 28XMP/ME, 28XS/ME and 52X/ME only) DEM-CB100S DEM-CB300S DEM-CB700S 10GbE SFP+ 1 m Direct Attach Cable 10GbE SFP+ 3 m Direct Attach Cable 10GbE SFP+ 7 m Direct Attach Cable 1 Feature available in a future software release Updated 10/07/2015 Specifications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners. 2015 D-Link Corporation. All rights reserved. E&OE.