MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES

Similar documents
CHAPTER 27 Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes NOTES

Technical Note: Conversion of fuel data to MWh

EXCISE. According to the customs warehouse application, before the realisation of importation there is no collection of tax.

Technical Note: Fuel Definitions

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

83 to 87% carbon 11-15% hydrogen 0.1-7% sulphur % oxygen % nitrogen

ASimple Guide to Oil Refining

Coal-To-Gas & Coal-To-Liquids

Harmonisation of Definitions of Energy Products and Flows

4. PRODUCTION, IMPORT/EXPORT, USE, AND DISPOSAL

"REACH for Coal Chemicals (R4CC)" REACH UVCB Categories and Specifications

Refining of Crude Oil - Process

Automotive Base Oil Presentation

Glossary of Energy Terms

The Relation Between Gasoline Quality, Octane Number and the Environment

RAILROAD COMMISSION OF TEXAS APPENDIX C LIST OF E&P WASTES: EXEMPT AND NONEXEMPT

LIST OF COMMONLY ENCOUNTERED PETROLEUM AND PETROLEUM PRODUCTS 1

Coal Gasification & Fischer-Tropsch

IMO Approved Tank Cleaning Chemicals

Gas Detection for Refining. HA University

Crude Assay Report. Crude Oil sample marked. "AL SHAHEEN CRUDE OIL" dated 10th April On Behalf Of. Maersk Oil Qatar AS

Advantages and Disadvantages of Low VOC Vegetable Based Metalworking Fluids

Filtered Prime Yellow Type 1. Centrifuged fatty Grey Type 3. Light orange

Product Specifications

Industry Description and Practices. Waste Characteristics

Figure 3-1-1: Alkaline hydrolysis (saponification) of oil to make soaps.

TO THE MINISTERIAL COUNCIL OF THE ENERGY COMMUNITY represented by the Presidency and the Vice-Presidency of the Energy Community REASONED REQUEST

Chapter 2 Chemical and Physical Properties of Sulphur Dioxide and Sulphur Trioxide

Oil Refinery Processes A Brief Overview

AUTOMOTIVE GAS OIL. Robert Shisoka Hydrocarbon Management Consultancy

UNIT 3 TYPES OF FUELS AND THEIR CHARACTERISTICS

Question Bank Organic Chemistry-I

EMERGENCY PETROLEUM SPILL WASTE MANAGEMENT GUIDANCE. Hazardous Materials and Waste Management Division (303)

Created by: Beata Boguszewska ... Arrangements made by: 1. Hanna Laskowska. 2. Tadeusz Głos. I approve for applying From

Appendices. Average Electricity Costs Newfoundland and Labrador

ASTM Certified Glass Thermometers

San Mateo County Environmental Health Characterization and Reuse of Petroleum Hydrocarbon Impacted Soil

COMBUSTION. In order to operate a heat engine we need a hot source together with a cold sink

FUEL OIL Crude Condensate Naphtha Ethane Reformate

Mercedes-Benz Biodiesel Brochure

Sulphur in Nigerian Diesel

Chapter 2: Stationary Combustion CHAPTER 2 STATIONARY COMBUSTION IPCC Guidelines for National Greenhouse Gas Inventories 2.1

Government Consideration VOLUME 2 ENERGY. Draft 2006 IPCC Guidelines for National Greenhouse Gas Inventories

Vacuum and Compressor Systems for the Chemical Process Industry

1.3 Properties of Coal

ISANE Isoparaffin Products

b) Listing of feed materials

Fact Sheet Technology. Bergius-Pier Process (1)

PRODUCTION OF CORROSIVE SULPHUR FREE TRANSFORMER FLUIDS vs. COMMON NAPHTHENIC MINERAL OILS

F The following spent

C H A P T E R 3 FUELS AND COMBUSTION

********** An short and simple explanation of how oil is converted into gasoline and then brought to you, the consumer.

HYDROCARBONS WHAT DO YOU THINK OF WHEN YOU HEAR THIS WORD?

Economic Impact and Small Business Analysis for Petroleum Refinery NESHAP Heat Exchange Systems

WASTE COOKING OIL TO FUEL PROGRAM HOW TO START YOUR OWN BIODIESEL FUEL PROGRAM

Page Which hydrocarbon is a member of the alkane series? (1) 1. Which is the structural formula of methane? (1) (2) (2) (3) (3) (4) (4)

Forensic Fingerprinting Petroleum Contaminants using UVF Field Screening Technology

Fuel Polishing Frequently Ask Questions.

CIMAC Guideline

CHM220 Addition lab. Experiment: Reactions of alkanes, alkenes, and cycloalkenes*

Specimen Paper. Chemistry 1F. Time allowed! 60 minutes

Johnson Controls Parts Centre. Sabroe S68 refrigeration oil

Oil and Gas Terms. Anticline: An arch of stratified rock layers that may form a trap for hydrocarbons.

Petroleum Tanks at Municipal Facilities

List Of Petroleum and Non-petroleum Oils

Energy Measurements and Conversions

Module 5: Combustion Technology. Lecture 33: Combustion air calculation

PRODUCT DATA SHEET DESCRIPTION:

Sources of waste oils and oil bearing wastes

PISA. Calculating new replacement values in property insurance

OIL INDUSTRY CONVERSIONS

Organic Chemistry Lab Experiment 4 Preparation and Properties of Soap

Coimisiún na Scrúduithe Stáit State Examinations Commission

Module 1: History of Fuels. Lecture 6: Fundamental definitions, properties and various measurements

Ecological Aspects of Oil Shale Processing

Refinery Equipment of Texas. Mini - Refinery Feasibility Overview

Bioremediation of contaminated soil. Dr. Piyapawn Somsamak Department of Environmental Science Kasetsart University

Product Specifications

Coke Manufacturing. Industry Description and Practices. Waste Characteristics

GCSE Chemistry Quiz Chemical Reactions

How To Run A Gas Plant

Development of large-scale H 2 storage and transportation technology with Liquid Organic Hydrogen Carrier (LOHC)

Introduction to Petroleum Geology

NITROGEN OXIDES FORMATION in combustion processes COMBUSTION AND FUELS

Unit Vocabulary: o Organic Acid o Alcohol. o Ester o Ether. o Amine o Aldehyde

TREATMENT OF OILY WASTEWATER BY ADSORPTION USING ANHTRACITE

The Engineering Science of Oil Pipelines

ShellSol D60. Shell Chemicals. Data Sheet. Lemont, IL Cotton Valley, LA. Product Name

Norit Activated Carbon for Purification of Edible Oils

Biomass gasification development of attractive business cases

Dual Biodiesel-Diesel blends Performance on Diesel engine as an Alternative Fuel

Did you know that. NEXBTL renewable diesel. Premium quality renewable diesel. As a drop-in biofuel, NEXBTL diesel behaves exactly like fossil diesel.

Avoiding co-product allocation in a simplified hypothetical refinery 1

(Adopted July 7, 1989)(Amended December 7, 1990) (Amended May 13, 1994) FUGITIVE EMISSIONS OF VOLATILE ORGANIC COMPOUNDS

A Guide to Hazardous Substance Storage Capacity

US Safety Data Sheet GEAR OIL SAE 10W/30 GEAR OIL SAE 10W/30

PROPERTIES OF GLYCERINE PHYSICAL PROPERTIES

Molecular Sieve Adsorbents

Introduction on Glycerol as co-product from biodiesel plants

Alkanes. Chapter 1.1

Transcription:

CHAPTER 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES Notes 1. This chapter does not cover: (a) separate chemically defined organic compounds, other than pure methane and propane which are to be classified in heading 2711; (b) medicaments heading 3003 or 3004; or (c) mixed unsaturated hydrocarbons heading 3301, 3302 or 3805. 2. References in heading 2710 to petroleum oils and oils obtained from bituminous minerals include not only petroleum oils and oils obtained from bituminous minerals but also similar oils, as well as those consisting mainly mixed unsaturated hydrocarbons, obtained by any process, provided that the weight the non-aromatic constituents exceeds that the aromatic constituents. However, the references do not include liquid synthetic polyolefins which less than 60 % by volume distils at 300 C, after conversion to 1 013 mbar when a reduced-pressure distillation method is used (Chapter 39). 3. For the purposes heading 2710, waste oils means waste containing mainly petroleum oils and oils obtained from bituminous minerals (as described in note 2 to this chapter), whether or not mixed with water. These include: (a) such oils no longer fit for use as primary products (for example, used lubricating oils, used hydraulic oils and used transformer oils); (b) sludge oils from the storage tanks petroleum oils, mainly containing such oils and a high concentration additives (for example, chemicals) used in the manufacture the primary products; and (c) such oils in the form emulsions in water or mixtures with water, such as those resulting from oil spills, storage tank washings, or from the use cutting oils for machining operations. Subheading notes 1. For the purposes subheading 2701 11, anthracite means coal having a volatile matter limit (on a dry, mineral-matter-free basis) not exceeding 14 %. 2. For the purposes subheading 2701 12, bituminous coal means coal having a volatile matter limit (on a dry, mineral-matter-free basis) exceeding 14 % and a calorific value limit (on a moist, mineral-matter-free basis) equal to or greater than 5 833 kcal/kg. 3. For the purposes subheadings 2707 10, 2707 20, 2707 30 and 2707 40, the terms benzol (benzene), toluol (toluene), xylol (xylenes) and naphthalene apply to products which contain more than 50 % by weight benzene, toluene, xylenes or naphthalene, respectively. 1

4. For the purposes subheading 2710 12, light oils and preparations are those which 90 % or more by volume (including losses) distil at 210 C according to the ISO 3405 method (equivalent to the ASTM D 86 method). 5. For the purposes the subheadings heading 2710, the term biodiesel means mono-alkyl esters fatty acids a kind used as a fuel, derived from animal or vegetable fats and oils whether or not used. Additional notes (1) 1. For the purposes subheading 2707 9980, the term phenols apply to products which contain more than 50% by w eight phenols. 2. For the purposes heading 2710: (a) special spirits (subheadings 2710 1221 and 2710 1225) mean light oils as defined in subheading note 4 to this chapter, not containing any anti-knock preparations, and with a difference not more than 60 C between the temperatures at which 5 % and 90 % by volume (including losses) distil; (b) white spirit (subheading 2710 1221) means special spirits as defined in paragraph (a) above with a flash -point higher than 21 C by the EN ISO 13736 method; (c) medium oils (subheadings 2710 1911 to 2710 1929) mean oils and preparations which less than 90 % by volume (including losses) distils at 210 C and 65 % or more by volume (including losses) distils at 250 C (ISO 3405 method, equivalent to the ASTM D 86 method); (d) heavy oils (subheadings 2710 1931 to 2710 1999 and 2710 2011 to 2710 2090) mean oils and preparations which less than 65 % by volume (including losses) distils at 250 C by the ISO 3405 method or which the distillation percentage at 250 C cannot be determined by that method; (e) gas oils (subheadings 2710 1931 to 2710 1948 and 2710 2011 to 2710 2019) mean heavy oils as defined in paragraph (d) above which 85 % or more by volume (including losses) distils at 350 C (ISO 3405 method, equivalent to the ASTM D 86 method); (f) fuel oils (subheadings 2710 19 51 to 2710 19 67 and 2710 20 32 to 2710 20 38) mean heavy oils as defined in paragraph (d) above (other than gas oils as defined in paragraph (e)) which, for a corresponding diluted colour C, have a viscosity V: not exceeding that shown in line I the following table when the sulphated ashes content is less than 1 % by the ISO 3987 method and the saponification index is less than 4 by theiso 6293-1 or 6293-2 method, exceeding that shown in line II when the pour point is not less than 10 C by the ISO 3016 method, exceeding that shown in line I but not exceeding that shown in line II when 25 % or more by volume distils at 300 C by the ISO 3405 method or, if less than 25 % by volume distils at 300 C, when the pour point is higher than 10 C below zero by the ISO 3016 method. These provisions apply only to oils having a diluted colour C less than 2. (1) Unless otherwise stated, the term method means the latest version the determination methods laid down by the Comité européen de normalisation (CEN), the International Standardisation Organisation (ISO), or the American Society for Testing and Materials (ASTM). 2

Diluted colour C/Viscosity V concordance table Colour C 0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 and more Viscosity V I 4 4 4 5,4 9 15,1 25,3 42,4 71,1 119 200 335 562 943 1 580 2 650 II 7 7 7 7 9 15,1 25,3 42,4 71,1 119 200 335 562 943 1 580 2 650 The term viscosity V means the kinematic viscosity at 50 C expressed in 10-6 m 2 s -1 by the ASTM D 445 method. 'The term diluted colour C means the colour a product, as determined by the ISO 2049 method (equivalent to the ASTM D 1 500. solvent. The colour must be determined immediately after dilution. Subheadings 2710 1951 to 2710 1967 and 2710 2032 to 2710 2038 cover only fuel oils natural colour. These subheadings do not cover heavy oils defined in paragraph (d) above for which it is not possible to determine: the distillation percentage at 250 C by the ISO 3405 method, equivalent to the ASTM D 86 method (zero shall be deemed to be a percentage), the kinematic viscosity at 50 C by the EN ISO 3104 method, or the diluted colour C by the ASTM D 1500 method. Such products fall in subheadings 2710 1971 to 2710 19 99 or 2710 2090. (g) containing biodiesel means that the products subheading 2710 20 have a minimum content biodiesel, i.e. mono-alkyl esters fatty acids (FAMAE) a kind used as a fuel, 0,5 % by volume (determination by the EN 14078 method). 3. For the purposes heading 2712, the expression crude petroleum jelly (subheading 2712 1010) is to be taken to apply to petroleum jelly a natural colour higher than 4,5 by the ASTM D 1500 method. 4. For the purposes subheadings 2712 9031 to 2712 9039,,the term crude is to be taken to apply to products: (a) with an oil content 3,5 % by weight or higher, if their viscosity at 100 C is lower than 9 10 6 m2 s 1 by the EN ISO 3104 method; or (b) a natural colour higher than 3 by the ASTM D 1500 method, if their viscosity at 100 C is 9 x 10-6 m 2 s -1 or higher by the ASTM D 445 method. 5. For the purposes headings 2710, 2711 and 2712, term specific process is to be taken to apply to the following operations: (a) vacuum distillation; (b) redistillation by a very thorough fractionation process; (c) cracking; 3

(d) reforming; (e) extraction by means selective solvents; (f) the process comprising all the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolorisation and purification with naturally active earth, activated earth, activated charcoal or bauxite; (g) polymerisation; (h) alkylation; (ij) isomerisation; (k) (in respect products subheadings 2710 1931 to 2710 1999 only) desulphurisation with hydrogen resulting in a reduction at least 85 % the sulphur content the products processed (EN ISO 20846, EN ISO 20884 or EN ISO 14596 or EN ISO 24260, EN ISO 20847 and EN ISO 8754 methods); (l) (in respect products heading 2710 only) deparaffining by a process other than filtering; (m) (in respect products subheadings 2710 1931 to 2710 1999 only) treatment with hydrogen at a pressure more than 20 bar and a temperature more than 250 C with the use a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. The further treatment with hydrogen lubricating oils subheadings 2710 1971 to 2710 1999 (e.g. hydrinishing or decolorisation) in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process; (n) (in respect products subheadings 2710 1951 to 2710 1967 only) atmospheric distillation, on condition that less than 30 % these products distils, by volume, including losses, at 300 C by the ISO 3405 method (equivalent to the ASTM D 86 method). If 30 % or more by volume, including losses, such products distils at 300 C by the ISO 3405 method (equivalent to the ASTM D 86 method), the quantities products which may be obtained during the atmospheric distillation and which fall in subheadings 2710 1211to 2710 1290 or 2710 1911 to 2710 1929 shall be dutiable at the same rates as those provided for under subheadings 2710 1962 to 2710 1967 according to the kind and value the products used and on the net weight the products obtained. This rule shall not apply to products so obtained which, within a period six months and subject to such other conditions as may be determined by the competent authorities, are to undergo a specific process or chemical transformation by a process not being a specific process; (o) (in respect products subheadings 2710 1971 to 2710 1999 only) treatment by means a high-frequency electrical brush-discharge; (p) solely for products under subheading 2712 9031: de-oiling by fractional crystallisation. Should any preparatory treatment prior to the above treatments be necessary by reason technical requirements, the customs exemption is to apply only to the quantities the products intended for and actually subjected to such the above treatments; anywaste products arising during preparatory treatment are also to be exempt from customs. 6. The quantities products which may be obtained during chemical transformation, or during preparatory treatment which may be necessary by reason technical requirements, and which fall in headings or subheadings 2707 10 00, 2707 20 00, 2707 3000, 2707 50 00, 2710, 2711, 2712 10, 2712 20, 2712 90 31 to 2712 90 99 and 2713 90 are to be dutiable at the same rates as those provided for in respect products for other purposes, according to the kind and value the products used and on the net weight the products obtained. This rule is not to apply to such products headings 2710 to 2712 which, within a period six months and subject to such other conditions as may be determined by the competent authorities, are to undergo a specific process or further chemical transformation. 4

Preferential rates 2701 Coal; briquettes, ovoids and similar solid fuels manufactured from coal: - Coal, whether or not pulverised, but not agglomerated: 2701 1100 00 - - Anthracite - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2701 12 - - Bituminous coal: 2701 1210 00 - - - Coking coal - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2701 1290 00 - - - Other - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2701 1900 00 - - Other coal - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2701 2000 00 - Briquettes, ovoids and similar solid fuels manufactured from coal - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2702 Lignite, whether or not agglomerated, excluding jet: 2702 1000 00 - Lignite, whether or not pulverised, but not agglomerated - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2702 2000 00 - Agglomerated lignite - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2703 0000 00 Peat (including peat litter), whether or not agglomerated - FIT FIT 0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2704 00 Coke and semi-coke coal, lignite or peat, whether or not agglomerated; retort carbon: 2704 0010 00 - Coke and semi-coke coal: - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2704 0030 00 - Coke and semi-coke lignite - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2704 0090 00 - Other - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2705 0000 00 Coal gas, water gas, producer gas and similar gases, other than petroleum gases and other gaseous hydrocarbons MQM - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2706 0000 00 Tar distilled from coal, from lignite or from peat, and other mineral tars, whether or not dehydrated or partially distilled, including reconstituted tars - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-5

Preferential rates 2707 Oils and other products the distillation high temperature coal tar; similar products in which the weight the aromatic constituents exceeds that the non-aromatic constituents: 2707 1000 00 - Benzol (benzene) - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2707 2000 00 - Toluol (toluene) - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2707 3000 00 - Xylol (xylenes) - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2707 4000 00 - Naphthalene 2707 5000 00 - Other aromatic hydrocarbon mixtures which 65 % or more by volume (including losses) distils at 250 C by the ISO 3405 method (equivalent to the ASTM D 86 method) - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18 0.325 - Other: 2707 9100 00 - - Creosote oils - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2707 99 - - Other: - - - Crude oils: 2707 9911 00 - - - - Crude light oils which 90 % or more by volume distils at temperatures up to 200 C - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2707 9919 00 - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2707 9920 00 - - - Sulphuretted toppings;anthracene - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2707 9950 00 - - - Basic products - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2707 9980 00 - - - Phenols - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 - - - Other: 2707 9991 00 - - - - For the manufacture the products heading 2803 - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2707 9999 00 - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18 0.325 6

Preferential rates 2708 Pitch and pitch coke, obtained from coal tar or from other mineral tars: 2708 1000 00 - Pitch - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2708 2000 00 - Pitch coke - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2709 00 Petroleum oils and oils obtained from bituminous minerals, crude: 2709 0010 00 - Natural gas condensates - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2709 0090 00 - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2710 Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 % or more petroleum oils or oils obtained from bituminous minerals, these oils being the basic constituents the preparations, other than those containing biodiesel and other than waste oils: - Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 % or more petroleum oils or oils obtained from bituminous minerals, these oils being the basic constituents the preparations, other than waste oils: 2710 12 - - Light oils and preparations: 2710 1211 00 - - - For undergoing a specific process - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18 0.325 2710 1115 00 - - - For undergoing chemical transformation by a process other than those specified in respect subheading 2710 1211 - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 - - - For other purposes: 7

Preferential rates - - - - Special spirits: 2710 1221 00 - - - - - White spirit - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2710 1225 00 - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 - - - - Other: - - - - - Motor spirit: 2710 1231 00 - - - - - - Aviation spirit - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.385 - - - - - - Other, with a lead content: - - - - - - - Not exceeding 0,013 g per litre: 2710 1241 00 - - - - - - - - With an octane number (RON) less than 95 KLT (2) L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.385 2710 1245 00 - - - - - - - - With an octane number (RON) 95 or more but less than 98 KLT (2) L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.385 2710 1249 00 - - - - - - - - With an octane number (RON) 98 or more KLT (2) L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.385 2710 1250 00 Exceeding 0,013 g per litre KLT (2) L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.385 2710 1270 00 - - - - - Spirit type jet fuel - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.385 2710 1290 00 - - - - - Other light oils - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.385 2710 19 - - Other: - - - Medium oils: 2710 1911 00 - - - - For undergoing a specific process - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2710 1915 00 - - - - For undergoing chemical transformation by a process other than those specified in respect subheading 2710 1911 - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 - - - - For other purposes: - - - - - Kerosene: 2710 1921 00 - - - - - - Jet fuel - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 (2) Measured at a temperature 15 C. 8

Preferential rates 2710 1925 00 - - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 2710 1929 00 - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.325 - - - Heavy oils: - - - - Gas oils: 2710 1931 00 - - - - - For undergoing a specific process - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.36 2710 1935 00 - - - - - For undergoing chemical transformation by a process other than those specified in respect subheading 2710 1931 - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.36 - - - - - For other purposes: 2710 1943 00 - - - - - - With a sulphur content not exceeding 0,001% by weight - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.36 2710 1946 00 - - - - - - With a sulphur content exceeding 0,001% by weight but not - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.36 exceeding 0,002% by weight 2710 1947 00 - - - - - - With a sulphur content exceeding 0,002% by weight but not - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.36 exceeding 0,1% by weight 2710 1948 00 - - - - - - With a sulphur content exceeding 0,1% by weight - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.36 - - - - Fuel oils: 2710 1951 - - - - - For undergoing a specific process: 2710 1951 10 - - - - - - Used by district heating facilities for heating purposes and by persons and entities for manufacturing purposes - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.25 2710 1951 90 - - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.25 2710 1955 - - - - - For undergoing chemical transformation by a process other than those specified in respect subheading 2710 1951: 2710 1955 10 - - - - - - Used by district heating facilities for heating purposes and by persons and entities for manufacturing purposes - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.25 2710 1955 90 - - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.25 - - - - - For other purposes: 2710 1962 - - - - - - With a sulphur content not exceeding 0,1% by weight: 2710 1962 10 - - - - - - - Used by district heating facilities for heating purposes and by persons and entities for manufacturing purposes - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.25 2710 1962 90 - - - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.25 - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.25 2710 1966 00 - - - - - - With a sulphur content exceeding 0,1 % by weight but not exceeding 0,5 % by weight 2710 1967 00 - - - - - - With a sulphur content exceeding 0,5 % by weight - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.25 - - - - Lubricating oils; other oils: 2710 1971 00 - - - - - For undergoing a specific process - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 9

Preferential rates - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1975 00 - - - - - For undergoing chemical transformation by a process other than those specified in respect subheading 2710 1971 - - - - - For other purposes: 2710 1981 - - - - - - Motor oils, compressor lube oils, turbine lube oils: 2710 1981 10 - - - - - - - In immediate packings or containers a net content not - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 exceeding 220 litres 2710 1981 90 - - - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1983 - - - - - - Hydraulic oils 2710 1983 10 - - - - - - - In immediate packings or containers a net content not exceeding 220 litres - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1983 90 - - - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1985 00 - - - - - - White oils, liquid paraffin - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1987 - - - - - - Gear oils and reductor oils: 2710 1987 10 - - - - - - - In immediate packings or containers a net content not exceeding 220 litres - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1987 90 - - - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1991 00 - - - - - - Metal-working compounds, mould-release oils, anti-corrosion oils - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1993 00 - - - - - - Electrical insulating oils - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1999 - - - - - - Other lubricating oils and other oils: 2710 1999 10 - - - - - - - In immediate packings or containers a net content not exceeding 220 litres - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 1999 90 - - - - - - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 2710 20 -Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 % or more petroleum oils or oils obtained from bituminous minerals, these oils being the basic constituents the preparations, containing biodiesel, other than waste oils: - - Gas oils: 2710 2011 00 - - - With a sulphur content not exceeding 0,001% by weight 2710 2016 00 - - - With a sulphur content exceeding 0,001 % by weight but not exceeding 0,1 % by weight 2710 2019 00 - - - With a sulphur content exceeding 0,1%by weight - - Fuel oils: - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.36 - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.36 0.36 - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 10

Preferential rates 2710 2032 00 - - - With a sulphur content not exceeding 0.5 % by weight - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.25 2710 2038 00 - - - With a sulphur content exceeding 0.5 % by weight - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 10 18 0.25 2710 2090 00 - - Other oils - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0,325 - Waste oils: 2710 9100 00 - - Containing polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs) - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2710 9900 00 - - Other - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2711 Petroleum gases and other gaseous hydrocarbons: - Liquefied: 2711 1100 00 - - Natural gas TJO L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 12 - - Propane: - - - Propane a purity not less than 99 %: 2711 1211 00 - - - - For use as a power or heating fuel - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 1219 00 - - - - For other purposes - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 - - - Other: 2711 1291 00 - - - - For undergoing a specific process - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 1293 00 - - - - For undergoing chemical transformation by a process other - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 than those specified in respect subheading 2711 1291 - - - - For other purposes: 2711 1294 00 - - - - - Of a purity exceeding 90% but less than 99% - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 1297 00 - - - - - Other - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 13 - - Butanes: 2711 1310 00 - - - For undergoing a specific process - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 1330 00 - - - For undergoing chemical transformation by a process other than - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 those specified in respect subheading 2711 1310 - - - For other purposes: 2711 1391 00 - - - - Of a purity exceeding 90% but less than 95% - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 1397 00 - - - - Other - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 1400 00 - - Ethylene, propylene, butylene and butadiene - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 1900 00 - - Other - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 - In gaseous state: 11

Preferential rates 2711 2100 00 - - Natural gas TJO - - 0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2711 2900 00 - - Other - - - 0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 0.1 2712 Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured: 2712 10 - Petroleum jelly: 2712 1010 00 - - Crude - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2712 1090 00 - - Other - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2712 20 - Paraffin wax containing by weight less than 0,75 % oil: 2712 2010 00 - - Synthetic paraffin wax a molecular weight 460 or more but - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18 - not exceeding 1560 2712 2090 00 - - Other - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2712 90 - Other: - - Ozokerite, lignite wax or peat wax (natural products): 2712 9011 00 - - - Crude - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2712 9019 00 - - - Other - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18 - - - Other: - - - Crude: 2712 9031 00 - - - - For undergoing a specific process - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2712 9033 00 - - - - For undergoing chemical transformation by a process other - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 - than those specified in respect subheading 2712 9031 2712 9039 00 - - - - For other purposes - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 - - - - Other: 2712 9091 00 - - - - Blend 1-alkenes containing by weight 80 % or more 1- - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18 - alkenes a chain-length 24 carbon atoms or more but not exceeding 28 carbon atoms 2712 9099 00 - - - - Other - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 5 18-2713 Petroleum coke, petroleum bitumen and other residues petroleum oils or oils obtained from bituminous minerals: - Petroleum coke: 2713 1100 00 - - Not calcined - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2713 1200 00 - - Calcined - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2713 2000 00 - Petroleum bitumen - L06-0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2713 90 - Other residues petroleum oils or oils obtained from 12

bituminous minerals: Preferential rates 2713 9010 00 - - For the manufacture the products heading 2803 - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2713 9090 00 - - Other - L06-10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2714 Bitumen and asphalt, natural; bituminous or oil-shale and tar sands; asphaltites and asphaltic rocks: 2714 1000 00 - Bituminous or oil-shale and tar sands - - - 0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2714 9000 00 - Other - - - 0 CEFTA : 0 / MSA/GB : 0 / TR : 0 18-2715 0000 00 Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs) - - - 10 CEFTA : 0 / MSA/GB : 0 / TR : 6 18-2716 0000 00 Electrical energy MWH - - 0 CEFTA : 0 / MSA/GB : 0 / TR : 0 0-13