LCD Controller with Built-in VRAM A single-chip LCD controller with built-in display memory allowing for low power consumption, low noise, and space-saving ability. This product is most suitable for the display control of mobile terminals and operation panels. S1D137F2A S1D1375FA S1D1376FA S1D1379FA S1D13742F1A S1D13743FA S1D13748FA S1D13748BB S1D13781FA S1D13A4FA BB S1D13A5BB Interface, (with external logic) (with external logic),,, SPI (with external logic) (with external logic) LCD Interface Depth 4-bit Q 16 grayscale 4-bit 12-bit 4-bit mono/ 6-bit color Q Q Q M:16 grayscale C:256 colors :256 colors M:64 grayscale C:64K colors :64K colors M:16 grayscale :64 colors 256K colors / WQ W WQ Q Q 64K colors M:64 grayscale C:64K colors : M:64 grayscale C:64K colors :64K colors M:64 grayscale C:64K colors :64K colors 32KB, 3.V 3.V 5.5V 3 overlay screens 8KB, TQFP13-64 2.7V 2.7V 5.5V SwivelView QFP14-8 8KB, 1.8V 1.8V PinP 32KB, 3.V 5.5V 3.V 5.5V 3 overlay screens TQFP15-1 TQFP14-8 768KB, 1.4V 1.6V 3.6V SwivelView QFP2-144 464KB, 1.4V 1.6V 3.6V SwivelView QFP2-144 124KB, 1.35V 1.62V 3.6V PinP QFP2-144 PFBGA1U-121 PinP, 384KB, 1.35V 1.62V 3.6V a-blend, QFP15-1, 16KB, 1.8V 2.75V 3.V T PFBGA1U-121 USB client 1.1, 256KB, 1.8V 2.75V 3.V PFBGA1U-121 USB client 1.1 S1D13781 Block Diagram S1D13781 Evaluation Board (S5U13781PC1) Host Host 8/ Indirect Direct SPI LUT1 Main Layer Pipe PIP Layer Pipe Blending LCD 16/18/24 WQ Panel Registers 384KByte LUT2 PLL Clock Test Mux Simple LCD Controller with Built-in VRAM A single-chip LCD controller with built-in display memory and simple function. S1D13L1FA S1D13L2FA S1D13L3FA Interface 8bit / 16bit,, SPI 16bit, 8bit /16bit LCD Interface / WQ Depth W 256K colors 384KB, 124KB, 768KB, 1.35V 1.35V 1.4V 1.6V 1.62V 3.6V 1.62V 3.6V 3.6V Picture in picture Picture in picture
Display Controller Line up n LCD Controller with VRAM An LCD controller for application in a wide range of small- large-size panel types. This product is most suitable for the display control of OA or FA equipment operation panels as well as for in-vehicle devices. Interface S1D1355FA LCD Interface Depth M:16 grayscale Up 2MB C:4K colors EDO-RAM :64K colors 2.7V 5.5V 2.7V 5.5V CRT support S1D1356FA M:64 grayscale Up 2MB C:64K colors EDO-RAM :64K colors CRT or NTSC/ 2.7V 5.5V 2.7V 5.5V PAL support, S1D13513F1A,, M:64 grayscale Up 16MB C:256K colors 3.V :256K colors S1D13513B1B,, M:64 grayscale Up 16MB C:256K colors 3.V : S1D13515FA, BB, XGA S S1D13517FA n S1D13517 Block Diagram Easy use Prewarping Up 64MB QFP22-256 3.V Embedded RISC Up 16MB 2.3V 2.7V 3.V n S1D13517 Evaluation Board (S5U13517PC1) H,, W, S Max. 9MHz S1D13517 PLL SS RGB Ingerface LCD Max. 45MHz Indirect Host Peripheral GPO[3:] PWM Easy connect n S1D13513 Block Diagram n S1D13513 Evaluation Board (S5U13513PC1) Camera Interface Camera Interface Keypad Interface Display (RGB with SCI) Optional TV support S1D13513 Includes; 2D Hardware Accelerar Sprite / BitBLT Engine 4 channel PWM Built in 2 PLLs and 2 OSCs General Purpose Interface Data and Control Signals Video Encoder Various LCD Interface 6 PinP α-blend
LCD Controller ing Camera Interface With the installation of a camera interface, this LCD controller can display camera images on the panel without placing load on the. This product is most suitable for the display control of a wide variety of applications such as mobile terminals and security devices. S1D13513F1A S1D13513B1B S1D13515FA BB Interface,,,,,, LCD Interface S1D13717FA, BB, Serial port for LCD S1D13715F1A, BB, Serial port for LCD S1D13719BB, Depth M:64 grayscale C:256K colors :256K colors M:64 grayscale C:256K colors : XGA 176x 22 Q Q 64K colors 224KB, 32KB, 512KB, Up 16MB Up 64MB Up 64MB Camera (pixel).3mp.3mp.3mp JPEG Codec.3MP Encode/ 1.3MP Encode/ 2.MP Encode/ 3.V 3.V 3.V 2.75V 3.25V 2.75V 3.25V 2.3V 3.25V Prewarping Embedded RISC SD memory card, SwivelView QFP22-256 QFP21-176 PFBGA12U-18 QFP21-176 PFBGA1U-16, PFBGA1U-18 SD memory card In-vehicle LCD Controller In our line-up of display controller products, this controller complies with in-vehicle quality. Interface LCD Interface, S2D13513F1A,,, S2D13513B1B,, S2D13515FA, BB,, S2D13719FA, Depth 64 grayscale 256K colors 64 grayscale XGA Q 512KB, Camera (pixel) Up 16MB.3MP Up 64MB.3MP Up 64MB.3MP JPEG Codec Supply Voltage 2.MP Encode/ 3.V 3.V 3.V 2.3V Temperature Range -4 +15 C -4 +15 C -4 +15 C -4 +15 C features Prewarping Embedded RISC, SD memory card QFP22-256
USB Interface LCD Controller An LCD controller allowing for reception of display data and transmission of uch-screen coordinate data at high speed via USB2.-HS. Most suitable for application OA equipment such as multi-functional printers with long lengths of cabling between the host and LCD panel, and in-vehicle devices such as rear entertainment displays. Interface LCD Interface Depth S1D13U11FA USB2. HS S Up 16MB 3.V PinP α-blend QFP2-144 S1D13U11 Block Diagram 16M/64M/128M-bit 12/24MHz X tal OSC/PLL LCDC RGB CMOS Interface PWM backlight cont. W Panel Device 48Mbps USB-HS (Device) Procol Sequencer + 96KB Peripheral Serial (Master) GPA[7:], GPB[7:] I 2 C, INT1 BUZZER SPI-ch Touch X/Y INT Screen Controller SPI-ch1 S1V334x S1D13U11 Serial Flash S1D13U11 Evaluation Board (S5U13U11P1C1) S1D13U11 Evaluation Board (S5U13U11PC1)
Video Encoder A video encoder with built-in VRAM, able be connected directly with the host bus and panel interface. This product is most suitable for various applications that display images on televisions, because it supports a wide array of input formats and complies with NTSC/PAL standards. S1D1356FA S1D13746F1A B1B Interface TV Output Composite / S-video, Composite / S-video (only for register access) S1D13746 System Block Diagram Input Data Format TV Standard RGB YUV DAC PAL 5:6:5 NTSC 8bpp Up 2MB 2.7V 2.7V 2.7V 5.5V EDO-RAM 5.5V 5.5V 4bpp PAL:B, D, G, H, I, M, N, Nc 8:8:8 4:2:2 NTSC:M, J 6:6:6 4:2: 5:6:5 3:3:2 312KB, 1.35V LCD 1.62V 2.7V 3.3V LCD support Image Enhancement Engine PFBGA7U-1 LCDC S1D13746 S1D13746 EPSON TV-Out No external RAM is necessary TV
EPD Controller A controller IC dedicated the electronic paper product from E Ink Corporation. This is an epoch-making product equipped with an architecture that maximizes the characteristics of electronic paper, allowing for pen input, text input, and other features that have thus far been difficult achieve. S1D13521B1B S1D13522AB S1D13524B1B Interface or, or Built-in Maximum Grayscale - 496 x 496 2/3/4/5bpp (for frame buffer) 2.7V 3.6V 16 area partial update PFBGA8U-181 PFBGA12U-18 15 area partial update, 2MB - 124 x 768 2/3/4bpp 3.6V Picture in Picture PFBGA1U-144 with Transparency - Mobile DDR (For frame buffer) 256 x 248 :RGB565 Gray Scale: 4bpp 1.4V 1.6V 3.6V Processor, 15 area partial update PFBGA11UK-241 S1D13521 System Block Diagram Flash Temperature Sensor Electrophoretic Active Matrix Display Using E Ink Host S1D13521
Display Controller Line up n Image Enhancement IC This is the image correction IC, which has been developed based on the Epson's unique image enhancement technologies, for medium- and small-size liquid crystal display panels. The Epson's image correction technologies, developed for cellular phone display controllers, have been improved the Au Movie Enhancement 2 Extended (AME2EX) technologies. They can realize both the small power consumption of LCD panel and the colorful image display. ed Interface S2D13782FA IC SPI (3 or 4-wired) 2 Image I/O Format RGB-//, YUV-,YUV- (ITU-R BT.656) Power Voltage Operating Temperature -4 +15 C 3.V QFP15-1 n S2D13782 System Configuration Example Control Signals (I2C or SPI) Timing Signals Video Signals (RGB ) Phosensor Video Signals (RGB ) PWM PWM LED Driver LED Power Supply LCD Panel n Image Expression Enhancement Examples The AME2EX technologies can reduce the backlight power consumption but enhance the texture and vividness of dark picture. Before Correction (at 1% Backlight Level) Before Correction (at 5% backlight level) n S2D13782 Evaluation Board (S5U13782PC1) After Correction (at 5% Backlight Level) n S2D13782 Motherboard (S5U13APC1) 11