Panasonic proposes the latest Thanks to recent advances in AV digitalization, our products now provide not experience that links users and their content to the Internet. As a semiconductor solutions, our company can respond to the various needs of customers during advances in technological innovations to provide a comprehensive lineup of design and development. Contents 1 Application Block Diagrams...2 2 Recommended Product List...3 3 Signal Processing System: Single-Chip Signal Processing LSIs for Blu-ray TM Players...4 4 Signal Processing System: Back-end Signal Processing LSIs for Blu-ray TM Recorders...5 5 Optical Pickup Units: 2-wavelength Laser Diode...6 6 Optical Pickup Units: Playback Laser Diode Driver...6 7 Optical Pickup Units: Front Monitor Photo IC...7 8 Other Peripheral Devices: Intelligent Power Device (IPD) for Power Supplies...7 9 Other Peripheral Devices: Photo IC for Remote Control Reception...8 10 Other Peripheral Devices: Luminance Sensor...8 11 Other Peripheral Devices: Panel Control Display Microcomputer 1...9 12 Other Peripheral Devices: Panel Control Display Microcomputer 2...9 13 Other Peripheral Devices: Panel CEC-control Display Microcomputer...10 14 Other Peripheral Devices: General-purpose MOS FET...10 15 Other Peripheral Devices: Small Signal Transistor Series... 11 16 Other Peripheral Devices: Diode Series... 11 1
optical disc solutions. only the means to record and play back video content, but also an interactive manufacturer with a wide range of industry-prominent product groups and the development of optical disc-related products. We will continue to make semiconductor products that will please our customers and contribute to set Application Block Diagrams Blu-ray TM Player System Block Diagram Blu-ray Disc TM /DVD/CD Optical pickup unit SDRAM Flash Ether PHY Laser diode Laser diode driver PDIC Digital signal processing LSI MN2WS0260 AV output Motor Driver Blu-ray TM Recorder System Block Diagram Blu-ray Disc TM /DVD/CD Optical pickup unit SDRAM Flash Ether PHY Laser diode FMD Laser diode driver PDIC FEP HDMI (Tx) Motor Driver Digital Tuner AV input/output Vin Vin Ain Digital Tuner Terrestrial analog tuner AV- SW AIOF SUB AADC Digital signal processing LSI PH1-Pro 3 MN2WS0140 driver D/O D S CV 1394DV / TS 1394 PHY SPDIF/COAX Modem Timer micon VCXO B-CAS HDD 2
2. Recommended Product List Component Units Recommended Product Reference Page Signal Processing System Digital Signal Processing LSI MN2WS0260 (for players) MN2WS0140 (for recorders) 4, 5 Optical Pickup Units 2-wavelength Laser LNCT28PF LNCT22PK 6 Laser Diode Driver AN22210A 6 Front Monitor Photo IC PNA4U62F 7 Other Peripheral Devices Intelligent Power Device (IPD) MIP2E* Series MIP2K* Series MIP3E* Series MIP2F* Series 7 Photo IC for Remote Control Reception PNJ4805M Series 8 Luminance Sensor PNJ4K01F PNJ4K11F 8 Panel Control Microcontroller MN101E29 Series MN101EF50D MN103LF08 Series MN101E31 Series MN101EF32D MN101EF57G 9, 10 General-purpose MOS FET SK860301 SK860302 SK850305 SK850306 SK840303 SK830305 SK830306 FK8V0303 FK8V0304 FK8V0305 FK8V0306 FC8V3303 FC8J3304 10 Small Signal Transistor Series DSA2001 DSA2002 DSA2005 DMA50*** DRA51*** DMA56*** DSC2001 DSC2002 DSC2005 DMC50*** DRC51*** DMC56*** 11 Diode Series DA2J101 DA3X102D DA3X103E DB2J317 DB2W318 DB2X414 DZ2J*** Series DZ2W*** Series 11 3
MN2WS0210 3. Signal Processing System: Single-Chip Signal Processing LSIs for Blu-ray TM Players MN2WS0260 is a single-chip signal processing LSI exclusively for Blu-ray 3D TM players, combining a front end for reading signals from Blu-ray Disc TM and a back end for converting this into AV data. By using this product, Panasonic will be able to realize smaller sizes and lower power consumption in Blu-ray Disc TM players compatible with the Blu-ray Disc TM 3D standards. Front-end Functions Compatible Media Digital Read Channel Functions Peripheral Circuits Playback of all optical disc media for BD-ROM, BD-R / -RE, DVD-Multi, +R, +RW, CD Built-in data PLL; PRML signal processing function 16-bit timers, 8-bit timers, serial systems, etc. AM34-SMP (32-bit symmetrical multiprocessor technology) 2 Operating voltage: 486 MHz, MMU, FPU build-in Cache memory (per 1): Instruction cache: 32 Kbytes, Data cache: 32 Kbytes Back-end Functions Video Decode Audio Decode Graphics Functions Stream Control MPEG-1, MPEG-2 (MP@HL), MPEG-4 AVC / H.264 High Profile / Main Profile, VC-1 Advanced Profile, PNG, GIF, JPEG Baseline, etc. MPEG-1, 2 Layer2, MPEG-2AAC, dts, dts HD, Linear PCM (DVD / BD), Dolby Digital, Dolby Digital Plus, Dolby TrueHD, etc. 2D / 3D graphics Encoding and decoding / authentication / copyright protection processing Media decoding (CSS, CPRM, CPPM, BD CPS, AACS / BD+, etc.) Peripheral Functions External Memory Media / network I/F: SD-Card 2, USB (HS) 2, HDMI Others: Digital video / Audio OUT, Video DAC, etc. 32-bit DDR3-SDRAM 1333 MHz, max. 4G-bit Operating Frequency Power Supply Voltage 486 MHz (Max) 3.3 V (I/O) / 1.5 V (DDR3) / 1.2 V (internal) BGA521-P-2727Fi (27 mm 521 pin BGA) Single-chip LSI for Blu-ray Disc TM players Front end Back end Front end AM34-SMP UniPhier Processor BGA521-P-2727Fi www Optical disc controller Digital read channels Servo Stream I/O Band insurance memory control Memory Memory Graphics engine AV I/O AV output (HDMI) Supports Blu-ray 3D TM. Peripheral IF such as USB (HS), HDMI (ver. 1.4), etc. are built in and the data bus width for external memory has been made 32-bit to greatly reduce system cost. Can handle network applications. Home NW 4
4. Signal Processing System: Back-end Signal Processing LSIs for Blu-ray TM Recorders MN2WS0140 is equipped with Panasonic's original MPEG-4 AVC / H.264 codec engine to provide simultaneous long-time recording of 2 full-hd broadcasts. In addition, playback of discs conforming to the Blu-ray 3D TM standards created using the cutting-edge image compression standard MPEG-4 MVC is also possible. By using this backend signal-processing LSI, a low-power-consumption Blu-ray TM disc recorder / player that can play back Blu-ray 3D TM discs and perform simultaneous long-time recording of 2 full HD programs can be achieved. Video Decode Video Encode Audio Decode AM34 32-bit symmetrical multiprocessor technology (2) Operating voltage: 500 MHz, MMU, FPU build-in L1 Cache memory (per 1) Instruction cache: 32 Kbytes, Data cache: 32 Kbytes L2 Cache memory 128 Kbytes MPEG-1, MPEG-2 (MP@ML, MP@HL), MPEG-4 AVC / H.264 (HP@L4.1, MP), VC-1, MPEG-4 SP / ASP L5, DivX Ver 3, 4, 5, 6 JPEG DSC Exif V2.1-compliant, JPEG BD-J BG (for BD-J Background Plane) MPEG-2 (MP@ML) SD, MPEG-4 AVC / H.264 HD / SD, MPEG-1 MPEG-1, 2 Layer2, 3, MPEG-2AAC, Dolby Digital, dts, LPCM, PPCM, etc. Functions Audio Encode Graphics Functions Stream Control MPEG-2 AAC / SBR, MP3, Dolby Digital, LPCM 2-ch, etc. 2D / 3D graphics, multibit font engine Transport stream decode processing Japan: BS / CS / ground wave (ARIB) U.S: Open Cable (MS-POD) / ground wave (ATSC) Europe: Satellite / ground wave digital (DVB) Encoding and decoding / authentication / copyright protection processing Media encoding and decoding (CSS, CPRM, CPPM, BD, CPS, AACS / BD+, etc.) Digital TV CA (MULTI2, DVB common, etc.) Network encoding and decoding (DTCP, etc.) Peripheral Functions External Memory Operating Frequency Power Supply Voltage Digital broadcasting I/F: Digital tuner input 2, IC card I/F 2, POD I/F Media / network I/F: Serial ATA 2, SD card 3, USB 1, IEEE1394 1, Ether controller 1 Others: Digital video / Audio IN/OUT, Video DAC, etc. DDR-3 Plus (Bus width: 64-bit, Frequency: 1333 MHz, Capacity: max. 6G-bit) 500 MHz (Max) 3.3 V (I/O) / 1.5 V (DDR3+) / 1.2 V (internal) HBGA857-P-3535AID (857 pin BGA) AM34-SMP UniPhier Processor Tuner Tuner www Home NW Stream controller Copy right protection peripheral I/F HDD Band insurance Memory controller Memory Picture signal processing 2D/3D graphics A/V IN/OUT Image output Audio IN/OUT HBGA857-P-3535AID of high-image-quality Blu-ray 3D TM created using MPEG-4 MVC is possible. Equipped with new MPEG-4 AVC / H.264 encoder to enable simultaneous recording of 2 full-hd broadcast programs. 5
5. Optical Pickup Units: 2-wavelength Laser Diode LNCT28PF and LNCT22PK are 2-wavelength high-output lasers with monolithically integrated DVD laser and CD laser. They contribute to making optical pickups for Blu-ray TM devices smaller and thinner by greatly reducing the number of optical system components. Pulse Light Po (mw) CD Laser (λ = 785 nm typ) CW Light Po (mw) Maximum Operating Temperature Tc ( C) Pulse Light Po (mw) DVD Laser (λ = 661 nm typ) CW Light Po (mw) Maximum Operating Temperature Tc ( C) Size LNCT28PF 330 (100 ns, 50%) 175 85 300 (30 ns, 35%) 90 85 5.15 mm wide 1.8 mm thick LNCT22PK 365 (100 ns, 50%) 200 85 330 (10 ns, 30%) 100 85 3.6 mm wide 1.2 mm thick <LNCT28PF> <LNCT22PK> Optical disc 2-wavelength laser Monolithic integration enables high-accuracy light output spacing. CD/DVD laser light-source integration enables optical system simplification. Frame package achieves smaller and thinner size. 6. Optical Pickup Units: Playback Laser Diode Driver AN22210A is a playback laser diode driver that provides the necessary functions for Blu-ray Disc TM, DVD, and CD playback on a single chip. It is equipped with an APC (Auto Power Control) that enables individual laser output intensity settings per pickup and an output current drive circuit compatible with back-monitor-type common-cathode lasers. In addition, a high-frequency superimposed oscillator and high-frequency spread spectrum function are built in, and EMI (Electro Magnetic Interference) is reduced. Power Supply Blu-ray TM Power Supply Maximum Current (ma) APC Function PDIN Input Resistance (W) Current Scale Setting Current Setting High-frequency Superimposed Frequency (MHz) High-frequency Superimposed Frequency Control High-frequency Superimposed Amplitude (mapp) High-frequency Superimposed Amplitude Control Spread spectrum Function Current High-speed ON/OFF Generalpurpose Function Monitor Function 5.0 V 8.0 V to 10.0 V 200 95 to 12.16 k 6-bit 8-bit 300 to 500 5-bit (Blu-ray TM ) 0 to 100 (DVD, CD) 0 to 50 7-bit 4 settings 2-terminal L/H/Hiz/M Iop IC temperature Spindle Motor Motor Driver Laser PDIC Focus Tracking Tilt Optical Pick-Up Sled Motor Laser Diode Driver Spherical Aberration Compensator Signal Processing LSI QFN020-P-0304B : QFN type, 20-pin Size: 3.2 mm 4.2 mm Height: 0.77 mm Pin pitch: 0.4 mm Compatible with back-monitor-type commoncathode lasers APC function enables per-pickup laser output intensity setting. Built-in high-frequency oscillator and spread spectrum function (EMI countermeasure) General-purpose terminal output function (2 terminals) 6
7. Optical Pickup Units: Front Monitor Photo IC A compact 3-wavelength-compatible photo IC for high-speed monitoring of laser diode light intensity in recordable-type optical disc (Blu-ray TM, DVD-R/RW/RAM, CD-R/W, etc.) equipment. Operating Supply Voltage V CC typ. (V) Supply Current (Dark Condition) I CC typ. (ma) PNA4U62F 5 14 Voltage V O typ. (mv / mw) L: 1.24 M: 2.39 (λ = 405 nm) H: 4.65 L: 2.08 M: 4.04 (λ = 650 nm) H: 7.83 L: 1.86 M: 3.61 (λ = 780 nm) H: 7.00 Offset Voltage V off min. / max. (mv) Response Time tr, tf typ. (ns) Maximum Voltage V omax. typ. (V) -30 / 30 5 2.2 LGA (8-pin) Spindle Motor Motor Driver Laser FMD Focus Tracking Tilt Optical Pick-Up PDIC Sled Motor Laser Diode Driver Spherical Aberration Compensator Optical Disc Controller PNA4U62F Photo IC with built-in 3-wavelength-compatible photoreceptor Blu-ray TM 8 speed compatible (fc 100 MHz; tr, tf: 5 ns) Gain customization possible to match optical system temperature drift ±3% design Differential output system (with built-in reference voltage) Current output type also available (3-wavelength compatible PD) 8. Other Peripheral Devices: Intelligent Power Device (IPD) for Power Supplies The IPD employs PWM control by the peak current control method under the rated load and intermittent oscillation control under light loads, providing high effi ciency from light loads to heavy loads and contributing to low power consumption during standby. For details, go to: http://www.semicon.panasonic.co.jp/e-ipd Series Example 3 terminal saving energy at standby For new compact power supplies MIP2E* / 3E* Series Over-heating Protection Latch Overload Protection Timer intermittence Overvoltage Protection None TO-220-A2 DIP7-A1 MIP2K* / 2F* Series Latch Foldback Latch DIP7-A1 AC/DC Power Supply Section AC Outlet Main Power Supply SW Module TO-220-A2 DIP7-A1 Sub Power Supply IPD Caution Point Please refer to "Precautions on the Sales of IPDs" provided in this catalog. MIP2E*/3E* series products achieve unloaded power consumption of 0.1 W or less for worldwide input/output power supplies of 60 W or less. MIP2K*/2F* series products achieve unloaded power consumption of 50 mw for worldwide input/ output power supplies of 15 W or less, and are also equipped with a built-in ILIMIT input compensation circuit to reduce the dependence of the maximum output voltage on the input voltage. 7
9. Other Peripheral Devices: Photo IC for Remote Control Reception PNJ4805M series is a low-current-consumption type infrared remote control receptor photo IC. Multi-voltage compatible (V CC = 2.7 V to 5.5 V), so current consumption is reduced compared to previous products. Can be used for a wide range of remote-control applications, such as digital equipment like TVs, DVD equipment, etc., home appliances such as air conditioners, etc., and game equipment or electronic toys, etc. (Ta = 25 C, Vcc = 3.3 V) Application Operating Supply Voltage V CC (V) Supply Current I CC (ma) Maximum Reception Distance L (m) Center Frequency f O (khz) Min. Typ. Max. Min. Typ. Max. Min. PNJ4805M Series For IR remote control 2.7 3.3 5.5 0.3 0.4 9 32.7, 36.7, 38, 40, 56.9 Miniature lead type Photo IC Remote Control Input Microcomputer PNJ4805M Series Low current consumption: I CC = 0.3 ma (typ) Compact general-purpose package (lead type) 6.5 4.7 4.0 mm Abundant BPF central frequency lineup: 32.7, 36.7, 38.0, 40.0, 56.9 khz Compatible with lead forming shape Metal holder compatible fir improved EMF noise characteristics Pb-free (conforms to RoHS directive) 10. Other Peripheral Devices: Luminance Sensor Photo IC with built-in photodiode and current amplifier circuit. Senses ambient brightness and controls the screen brightness to maintain the screen's ease of viewing. Has wavelength characteristics similar to the visual sensitivity of the human eye to enable control close to human senses. PNJ4K01F PNJ4K11F I CC typ. (µa) L = 0 lx (µa) I O (V CC = 3.0 V) L = 100 lx (µa) λ P (nm) 480 4.3 43 560 KPTFTN6K0001 KPTFTN4K0002 Regulator Switch for shutdown PD VCC Current Amp. IOUT GND Iout RL = Vin RL Vo GPIO AD Converter Analog Port LED Driver LED Driver LED for LCD back light 10 Key LED PNJ4K01F PNJ4K11F Small package: 1.5 1.55 0.55 mm (PNJ4K01F) Wavelength characteristics similar to the visual sensitivity of the human eye Good linearity of output current in response to incident luminance PNJ4K01F: Linear output PNJ4K11F: For back-side mounting 8
11. Other Peripheral Devices: Panel Control Display Microcomputer 1 8-bit microcomputer with Panasonic's original 8-bit AM13E built in to provide the features of reduced code size, low power consumption, and high speed. They are equipped with LCD driver and diverse peripheral functions to enable reducing the component count and mounting area. Lineup with various pin counts and memory size to enable application in a wide range of systems. Internal ROM Type ROM (Bytes) RAM (Bytes) Minimum Command Execution Time/ Operating Voltage (ms/v) I/O Port Count (ports) Interrupts [Singlechip (Factors) mode] 8-bit Timers (Number) 16-bit Timers (Number) Combined Synchronous Type/ UART Serial Interface Combined Synchronous Type/ I 2 C I 2 C A/D D/A Converter Converter (ch) (ch) MN101E29G M 128K 6K 0.05 / 2.2 to 5.5 90 28 7 3 4 1 1 16 4 SEG55 MN101EF29G F 128K + 4K COM4 MN101E31D 64K 4K M 0.05 / 2.2 to 5.5 MN101E31G 128K 6K 70 23 7 2 3 1 1 12 SEG41 MN101EF31D 64K + 8K 4K 0.05 / 2.7 to 5.5 COM4 F MN101EF31G 128K + 4K 6K 0.05 / 2.2 to 5.5 MN101EF32D F 64K 4K 0.05 / 2.7 to 5.5 54 23 7 2 3 1 1 8 SEG32 COM4 LCD Highaccuracy Internal Oscillator Function LQFP100-P-1414 QFP100-P-1818B LQFP080-P-1414A LQFP064-P-1414 LCD indicator/keys Blu-ray Disc TM /DVD/CD Spindle motor Optical pickup Linear driver Head amp Optical disc controller Remote control I/O ports Timer MN101EF29G Driver LQFP100-P-1414 LQFP064-P-1414 Built-in LCD driver MN101E29 Series: 4COM 55SEG MN101E31 Series: 4COM 41SEG MN101E32 Series: 4COM 32SEG Abundant lineup expansion 12. Other Peripheral Devices: Panel Control Display Microcomputer 2 MN101EF50D/F57G are 8-bit flash microcomputers with Panasonic's original 8-bit AM13E built in to provide the features of reduced code size, low power consumption, and high speed. They are equipped with high-accuracy internal oscillators and highaccuracy supply voltage detection circuits to enable reducing the external component count to achieve reduced system cost and simplifying equipment design. In addition, 3-phase/4-phase PWM functions for motor control are built in, simplifying the control of various motors such as stepping motors, brushless motors, ultrasonic motors, etc. Internal ROM Type ROM (Bytes) RAM (Bytes) MN101EF50D F 64K 4K MN101EF57G F 128K 6K Minimum Command Execution Time/ Operating Voltage (ms/v) 0.05 / 2.7 to 5.5 0.125 / 1.8 to 5.5 0.05 / 2.7 to 5.5 0.125 / 1.8 to 5.5 I/O Port Count (ports) Interrupts [Singlechip (Factors) mode] 8-bit Timers (Number) 16-bit Timers (Number) Combined Synchronous Type/ UART Serial Interface Combined Synchronous Synchronous Type/ Type I 2 C A/D Converter (ch) D/A Converter (ch) LCD 55 30 7 2 3 1 0 12 SEG24 COM8 70 34 7 3 3 1 0 16 2 SEG41 COM4 Highaccuracy Internal Oscillator Function Highaccuracy LQFP064-P-1414 internal oscillator LQFP080-P-1414A 1.6% TQFP080-P-1212D LCD indicator/keys Blu-ray Disc TM /DVD/CD Spindle motor Optical pickup Linear driver Head amp Optical disc controller Remote control I/O ports Timer MN101EF57G Driver LQFP080-P-1414A Ultra-wide supply voltage range: 1.8 V to 5.5 V Equipped with high-accuracy internal oscillator (16 MHz/20 MHz ±1.6%). Equipped with high-accuracy supply voltage detection (selectable from 10 potentials; accuracy: ±0.1 V). Equipped with PWM function (4-phase; phasecompensation 3-phase) to control various motors. Built-in LCD driver 9
13. Other Peripheral Devices: Panel CEC-control Display Microcomputer MN103LF08 series is a power-management microcomputer for HDMI-compatible equipment such as recorders, televisions, AV amps, etc. HDMI-CEC, remote control photoreceptor circuits, and real-time clock are built in to achieve reduced power consumption when set is in standby. It is equipped with internal oscillators and voltage detection circuits to enable reduced microcomputer peripheral component counts and reduced system cost. Internal ROM Type ROM (Bytes) RAM (Bytes) Performance (MIPS/MHz) [Dhrystone 2.1] Minimum Command Execution Time/Operating Voltage (ms/v) I/O Port Interrupts Count (Factors) (ports) 8-bit Timers (Number) 16-bit Timers (Number) Serial Interface Combined Synchronous Type/ UART Combined Synchronous/ Multimaster I 2 C A/D Converter (ports) MN103LF08K F 256K 20K 38 / 40 25 / 2.2 to 5.5 88 71 6 7 5 3 16 4 DMA Controller (ch) Other HDMI-CEC Remote control reception LQFP100-P-1414 Real-time clock QFP100-P-1818B Video data HDM connector CEC line LQFP100-P-1414 CEC circuit High-speed multiplier PLL Peripheral circuits Internal reset IC CLKGEN Low-speed oscillator High-speed oscillator Reset IC voltage detection HDMI-CEC compatible (Software development kit available) Remote control interface Remote control signal reception: AEHA-format compatible Enables HDMI-CEC and remote control reception standby in low-speed clock drive condition Built-in oscillator and reset circuits enable reducing the number of microcomputer peripheral components. 14. Other Peripheral Devices: General-purpose MOS FET An advanced fine process delivers some of the industry s lowest R DS (on) and Qg values. These energy-saving devices can boost device efficiency. Polarity V DSS V GSS I D RDS(on) (mw) typ. Qg C iss (V) (V) (A) VGS = 4.5 V VGS = 10 V (nc) (pf) SK860301 44 2.5 2 22.5 3500 SK860302 38 3.1 2.5 19 3000 HSO8-F1-B SK850305 18 10 7 7 950 SK850306 15 13 9 6 730 HSO8-F2-B SK840303 22 7 5 10 1450 HSSO8-F1-B Nch SK830305 16 10 7 7 950 SIngle HSSO8-F2-B SK830306 33 ±20 14 13 9 6 730 FK8V0303 12 8 5 10.2 1100 FK8V0304 10 11 7 7.2 750 FK8V0305 8 16 11 5.1 520 WMini8-F1 Nch Dual FK8V0306 6.5 22 15 3.8 360 FC8V3303 6.5 22 15 3.8 360 FC8J3304 5.0 48 32 2.8 220 Step-up circuit Vin Vout Step-down circuit/ synchronous rectification Nch MOS FET Vin Vout WMini8-F1 HSO8-F1-B HSSO8-F1-B Nch MOS FET Nch MOS FET 2.4 2.9 0.8 4.9 5.9 1.0 3.05 3.05 1.0 DC/DC Controller DC/DC Controller Low R DS (on) and Qg values with integrated heat sink on bottom (HSO8, HSSO8) 10
15. Other Peripheral Devices: Small Signal Transistor Series This transistor series delivers a high level of reliability thanks to its use of an advanced fine process. Furthermore, use of compact packages helps reduce set size. Function Single Tr Compound Tr Built-in resistance Compound builtin resistance Vce(sat) max. VCEO Ic PNP NPN (V) (A) (V) Ic(A) hfe DSA2001 DSA2002 DSC2001 DSC2002-50/50-0.1/0.1-0.5/0.5 0.5/0.3 0.6 0.1 0.3 210 to 460 120 to 340 Mini3-G3-B Mini3-G3-B-B DSA2005 DSC2005-0.2/0.2 0.3 0.1 150 to 390 Mini3-G3-B DMA50*** DMC50*** Varies with combination SMini5-F3-B SMini6-F3-B DRA51*** DMA56*** DRC51*** DMC56*** -50/50-0.1/0.1 - - - SIZE L W H(mm) 1.5 2.9 1.1 1.25 2.0 0.7 SMini3-F2-B 1.25 2.0 0.9 SMini5-F3-B SMini6-F3-B 1.25 2.0 0.7 Switching circuit Power-supply circuit Others Mini3-G3-B Mini6-G4-B Improved reliability thanks to use of new process Various product lineup Compact surface-mount packages Use halogen-free resin in all part numbers 16. Other Peripheral Devices: Diode Series These diodes offer both compact size and high performance. They deliver a high level of reliability thanks to their use of an advanced fine process based on state-of-the-art technology. Furthermore, use of compact packages helps reduce set size. Function Switching diode Schottky barrier diode Zener diode VF max. VR IF IR max. (V) (A) (V) IF(A) ( A) SIZE L W H(mm) DA2J101 SMini2-F5-B 1.25 1.7 0.7 DA3X102D 80 0.1 - - 0.1 DA3X103E Mini3-G3-B 1.5 2.9 1.1 DB2J317 1.0 0.52 1.0 100 SMini2-F5-B 1.25 1.7 0.7 30 DB2W318 2.0 0.43 2.0 200 Mini2-F3-B 1.6 2.6 0.8 DB2X414 40 2.0 0.49 2.0 200 DZ2J*** PT=0.2W Vz=2.4V to 39V SMini2-F5-B 1.25 1.7 0.7 DZ2W*** PT=1W Vz=2.4V to 51V Mini2-F3-B 1.6 2.6 0.8 Switching circuit Power supply circuits Constant-voltage circuit, surge protection circuit (Zener diode) Other Mini2-F3-B SMini2-F5-B Low-VF/low-IR characteristics Extensive product lineup Compact surface-mount packages All products use halogen-free resin. 11
MEMO
MEMO
Precautions on the Sales of IPDs 1) The sale and/or the export of IPD products to customers located in certain countries is restricted by the Agreement made and executed by and between Power Integrations, Inc. and Panasonic Corporation. For details, refer to the following Attached table "IPD availability by customer." 2) IPD products purchased from our company, or its authorized agents, hereinafter referred to as our company, shall be used only for production purposes by those parties who have duly purchased IPD products. Those who have purchased IPD products shall not use such IPD products in unmodified form for re-sale, loan, or sample shipment for evaluation purposes to any other parties. 3) If a party who has duly purchased IPD products subcontracts its production to any other parties, including its subsidiaries or any other third parties inside and/or out of Japan, and the IPD products are consigned to such subcontracting parties thereat, such party is obligated to monitor and control the quantity of IPD products to prevent any of the aforementioned re-sale, loan or sample shipments from taking place. 4) In the event that any actual or threatened breach or violation of any of the above mentioned 2) or 3) has occurred or is about to occur, our company will hold all shipments of IPD products and may request the customer to disclose necessary documentation describing the status of our end-users and/or distribution channels. Note) The products of MIP50, MIP51, and MIP7 are excluded from above-mentioned precautions, 1) to 3). Attached table "IPD availability by customer" Parts No. Companies/areas to which products can be sold Companies/areas to which products cannot be sold Application MIP0 MIP3 MIP9L MIP1 MIP4 MIP2 MIP9A Japanese companies in Japan Japanese companies in Asia (50% or more owned) Companies in European and American countries Asian companies in Asia Other local companies For power supply For DC-DC converter MIP52 MIP816/826 MIP55 MIP9E MIP803/804 Japanese companies in Japan Japanese companies in Asia (50% or more owned) Asian companies in Asia Companies in European and American countries Other local companies For power supply For EL driver For LED lighting driver MIP50 MIP51 MIP7 No restrictions in terms of contract No restrictions in terms of contract For lamp driver/ car electronics accessories Note) For details, contact our sales division.