ISO 14001 Registration Guidance Document



Similar documents
ISO/IEC Registration Guidance Document

Aerospace Guidance Document

TG TRANSITIONAL GUIDELINES FOR ISO/IEC :2015, ISO 9001:2015 and ISO 14001:2015 CERTIFICATION BODIES

ISO/TS 16949:2002 Guidance Document

Certification Process Requirements

IAF Mandatory Document for the Transfer of Accredited Certification of Management Systems

3 Terms and definitions 3.5 client organization whose management system is being audited for certification purposes

Certification Process Requirements

P-01 Certification Procedure for QMS, EMS, EnMS & OHSAS. Procedure. Application, Audit and Certification

General Rules for the certification of Management Systems

REQUIREMENTS FOR CERTIFICATION BODIES TO DETERMINE COMPLIANCE OF APPLICANT ORGANIZATIONS TO THE MAGEN TZEDEK SERVICE MARK STANDARD

IAF Informative Document. Transition Planning Guidance for ISO 9001:2015. Issue 1 (IAF ID 9:2015)

Client information note Assessment process Management systems service outline

IAF Mandatory Document

IAF Mandatory Document

An Alternative Method for Maintaining ISO 9001/2/3 Certification / Registration

AUDITOR GUIDELINES. Responsibilities Supporting Inputs. Receive AAA, Sign and return to IMS with audit report. Document Review required?

General Conditions for the Certification of Management System

Regulations for certification of quality management systems

NABET Criteria for INFORMATION SECURITY MANAGEMENT SYSTEMS (ISMS) Lead Auditor Training Courses

IAF Mandatory Document. Witnessing Activities for the Accreditation of Management Systems Certification Bodies. Issue 1, Version 2 (IAF MD 17:2015)

Presentation by BSI on the main changes to the IATF ISO/TS certification scheme

CHECKLIST ISO/IEC 17021:2011 Conformity Assessment Requirements for Bodies Providing Audit and Certification of Management Systems

Rules for the certification of Environmental Management Systems

Application of ISO/IEC for the Accreditation of Food Safety Management Systems (FSMS) Certification Bodies

Certification Body Quarterly Data Submission Instructions QFE-016 Version 1.0

Certification Procedure of RSPO Supply Chain Audit

REQUIREMENTS FOR GAINING AND MAINTAINING ACCREDITATION SAAS CERTIFICATION REQUIREMENTS TABLE OF CONTENTS 1.0 CERTIFICATION BODY...

FSSC Q. Certification module for food quality in compliance with ISO 9001:2008. Quality module REQUIREMENTS

Regulations for the certification of environmental management systems in conformity with UNI EN ISO 14001:2004

General Rules for the Certification of Management Systems Code: RG

ISO 14001:2004 EMS Internal Audit Checklist & Gap Analysis

CP14 ISSUE 5 DATED 1 st OCTOBER 2015 BINDT Audit Procedure Conformity Assessment and Certification/Verification of Management Systems

National Accreditation Board for Certification Bodies. Accreditation Criteria

Rules for the certification of event sustainability management system

SCS FSC Chain-of-Custody Guidance for Certification of Multiple Sites

Rules for the certification of asset management systems

Translation Service Provider according to ISO 17100

DLS QUALITY MANAGEMENT, INC

SCHEDULE OF SAAS FEES TABLE OF CONTENTS 1.0 PURPOSE ACCREDITATION APPLICATION FEES ANNUAL FEES ASSESSMENT FEES...

Management Systems Recognition Booklet

Rules for the certification of Food Safety Management Systems

RSPO Supply Chain Certification Systems

Document Reference APMG 15/015

ISO Energy Management System

Implementing ISO 9001

EUROPEAN INSPECTION AND CERTIFICATION COMPANY S.A.

DQS UL ASSESSMENT AND CERTIFICATION REGULATIONS

NOTICE. Re: GD210: ISO 13485:2003 Quality Management System Audits Performed by Health Canada Recognized Registrars

Compliance Management Systems

ISO/IEC 17021:2011 Conformity assessment Requirements for bodies providing audit and certification of management systems

FSSC Certification scheme for food safety systems in compliance with ISO 22000: 2005 and technical specifications for sector PRPs PART I

HKCAS Supplementary Criteria No. 8

Certification Manual. Fair Trade USA V2.0 English Version. SCS Global Services Manual

Canadian Grain Commission

Asset Management Systems Scheme (AMS Scheme)

UL s Medical Quality Management System Registration

(Draft) Transition Planning Guidance for ISO 9001:2015

Procedure PS-TNI-001 Information Security Management System Certification

RSPO Supply Chain Certification Systems. For accreditation and certification bodies

EA-7/01. EA Guidelines. on the application. Of EN Publication Reference PURPOSE

Description of the certification procedure MS - ISO 9001, MS - ISO 14001, MS - ISO/TS and MS OHSAS and MS ISO 50001

Specific Conditions for the Assessment of Management Systems and Product Certifications

Single Manufacturing Site with. Extended Manufacturing Site(s)

REGULATIONS FOR THE CERTIFICATION OF MANAGEMENT SYSTEMS

ETSI TS V2.1.1 ( )

Policies for Accredited Registration and Other Third-Party Services

IAF Mandatory Document for the use of Computer Assisted Auditing Techniques ( CAAT ) for Accredited Certification of Management Systems

NABET Accreditation Criteria for 3 Day Modular OH&S Auditor Training Course

NABET Accreditation Criteria for QMS Lead Auditor Training Course

IAF Mandatory Document for Duration of QMS and EMS Audits

IRCA Certificated QMS Lead Auditor Training Course. Programme

NABET Criteria for OH&S Lead Auditor Training Course

ETSI EN V2.2.2 ( )

VdS Guidelines for the Certification of quality management systems

ISO 14001:2015 Client Transition Checklist

ISO 9001 (2000) QUALITY MANAGEMENT SYSTEM ASSESSMENT REPORT SUPPLIER/ SUBCONTRACTOR

IAQG AS 9104 System Process Flowcharts

IAF Informative Document. IAF Informative Document for the Transition of Management System Accreditation to ISO/IEC 17021:2011 from ISO/IEC 17021:2006

ASCLD/LAB-International

SQF SYSTEMS PRACTICE TEST / OCTOBER, 2012 American Food Safety Services Division, Technical and Business Services, LLC

Specific Conditions for the Assessment of Management System and Product Certifications

Dutch Accreditation Council (RvA) Policy rule Nonconformities. Corrective action

ISO 14001:2004 vs. ISO 14001:2015

IAF Informative Document for the Transition of Food Safety Management System Accreditation to ISO/TS 22003:2013 from ISO/TS 22003:2007

TRANSPORT FOR LONDON (TfL) LOW EMISSIONS CERTIFICATE (LEC) GUIDANCE NOTES FOR THE COMPANY AUDIT PROCESS. LEC (Company Audit) Guidance Notes

FSSC Certification scheme for food safety systems in compliance with ISO 22000: 2005 and technical specifications for sector PRPs PART II

Validation Audit Process Definition and Criteria

RSPO Supply Chain Certification Systems

Food Safety. Management Systems. Scope of Accreditation

LIFEMARK VILLAGE SCHEME RULES A SIX-PILLAR QUALITY ASSURED RETIREMENT COMMUNITY

IAF Informative Document for the Transition of Food Safety Management System Accreditation to ISO/TS 22003:201X from ISO/TS 22003:2007

Review and Revision of ISO/IEC 17021

FSC INTERNATIONAL STANDARD

Certification Regulations and Requirements. International Certification Management GmbH

PSC 05T REGULATION FOR THE CERTIFICATION OF THE ISO TS MANAGEMENT SYSTEM CONTENTS 1. PURPOSE AND SCOPE OF APPLICATION

UL Qualified Firestop Contractor Program Requirements April 2012

ISO 9001 : 2008 QUALITY MANAGEMENT SYSTEM AUDIT CHECK LIST INTRODUCTION

Transcription:

Introduction ISO 14001 Registration Guidance Document ISO 14001:2004 emphasizes the continuous improvement of an environmental management system (EMS). The standard specifies requirements for an environmental management system to enable an organization to develop and implement a policy and objectives which take into account legal requirements and information about significant environmental aspects. The certification process ensures the conformance of your EMS against the international standard, as well as any organizational specific requirements that have been identified. It is important to understand that the audit is not a compliance audit; compliance is the responsibility of the organization. If during the course of the audit the auditor discovers compliance issues, he or she will notify the organization. Findings may result but would be written against a failure to address a requirement of the standard or the organization s processes. Reading the expectations contained in this document will help an organization better understand their role in the certification process. Additional guidance that should be utilized can be found in Annex A of the 14001:2004 standard. Scope and Exclusions The scope of the registration is important for setting boundaries for the registration activities and defining the processes included. NQA can help guide appropriate verbiage for the scope to ensure clarity both during the audits and for the future registration. Quotation Process NQA s quotations are prepared based on information that your organization provides and by using IAF MD5-2009 and ISO/IEC 17021. These documents consider the number of employees and the complexity of the business when determining the appropriate amount of audit time. When you return the signed quotation the scheduling process begins. Scheduling A Client Support Representative (CSR) will contact you to arrange a mutually agreed upon schedule. The CSR will serve as your main point of contact and will set up the Stage One, Stage Two and Surveillance activities. Audit Process The NQA audit program includes a two stage registration audit process followed by surveillance audits, and ultimately a recertification audit. NQA audits include on-site assessments of documents, data, records, activity and personnel. Process audit trails are followed by interviews of personnel responsible for the tasks and reviewing associated activity and records of occurrence. The audit trail will follow interactions between processes as well as the details of the process itself. Following are the stages of the audit process. Pre-assessment (Optional) The pre-assessment audit is an optional activity, outside of the registration process, that NQA highly encourages any organization to undertake to evaluate the readiness to undergo the two stage registration process. NQA offers this as a value-added option that would optimally occur prior to the stage 1 and 2 audits. This activity can be tailored to meet your specific objectives. Unlike the Stage 1 and Stage 2

activities you have full discretion as to which areas the pre-assessment should focus on and for the length of the pre-assessment. This activity allows your organization to become familiar with the audit process and helps prepare your employees for the registration assessment. The auditor conducting the pre-assessment will typically return to the organization for the assessment. Similar to a true audit, the end result of the pre-assessment will be a documented report identifying findings observed during the audit and a closing meeting to discuss the issues. The pre-assessment activity allows you to correct any issues prior to beginning the registration process. Registration Audit - Stage 1(Required) The stage 1 audit, conducted at your facility, is primarily performed for planning and determining the readiness of an organization to undergo a stage 2 registration audit. It also facilitates communicating any NQA needs and expectations to the organization. Activities performed at a stage 1 audit include: Conducting a documentation review - This review determines if the organization's EMS documentation adequately covers all the requirements of the ISO standard A review of the aspects and impacts and their significance and an evaluation of the facility(s) site specific conditions A review of your organizations non-conformance, preventive and corrective action system An overview of applicable regulations Interviewing your organization s personnel to assess their general readiness to undertake a stage 2 audit Confirming the applicability of the scope of the organization's EMS Obtaining evidence that internal audits and management reviews are being planned and performed and will be completed prior to Stage 2 Providing focus for the planning of the stage 2 audit At the closing meeting, the auditor will provide a report identifying any nonconformities and opportunities for improvements. A review of this will enable you and your auditor to ensure that there is sufficient time to resolve all areas of concern prior to performing the stage 2 audit. If during the stage 1 audit any nonconformities are identified, the auditor will request a corrective action response (see Corrective Action Response). Registration Audit - Stage 2 (Required) The objective of the Stage 2 on-site audit is to assess your organizations adherence to your own policies, objectives, and procedures and to ascertain conformance to the requirements of the ISO 14001 standard. To accomplish this, the audit will address the implementation of all the elements of the standard. Review of documentation and records to support the implementation is an expected part of the assessment process. If non-conformances or opportunities for improvement are identified they will be documented in a report which will be presented to the organization during the closing meeting. The report will include the auditor s recommendation regarding registration.

Audit Findings Any deviation from procedures or requirements of the standard will be identified as an audit finding, which will be documented in the audit report. The auditor will draw your attention to non-conformities as they arise so there will be no surprises at the closing meeting. Findings are categorized into three categories defined as follows: A major non-conformity relates to the absence or total breakdown of a required process or a number of minor non-conformities listed against similar areas. A major nonconformity at the Registration Audit Stage 2 would defer recommendation for registration until that major has been closed. A minor non-conformity is an observed lapse in your systems ability to meet the requirements of the standard or your internal systems, while the overall process remains intact. An observation or opportunity for improvement relates to a matter about which the Auditor is concerned but which cannot be clearly stated as a non-conformity. Observations also indicate trends which may result in a future non-conformity. Corrective Action Response NQA requires corrective action responses from all Registration Audits. Once certification is achieved, dependent upon the extent and nature of the findings, your organization may be required to submit a corrective action plan, detailing your intent to correct the non conformity. The auditor may also recommend that your organization submit objective evidence to support the closure of the finding. In certain circumstances such as a major non conformity an on site activity to verify closure may be required. It is recommended that all non-conformities are addressed within your internal corrective action system. Typically, opportunities for improvement would be addressed as preventive actions by your organization. Certificate Issuance Following a successful review of the audit team s report and associated corrective action submittal, NQA will authorize issuance of a certificate that is valid for a period of three years. The organization can expect to receive its certificate within 1-2 weeks of review and acceptance of corrective actions. Surveillance Audits NQA will conduct Surveillance Audits on an annual or semi-annual basis. The purpose of the Surveillance Audit is to ensure that the EMS continues to conform to both the organizations and the ISO 14001 requirements. Certain processes will be reviewed at each surveillance including: A review of action taken on nonconformities identified during the previous audit Internal audits and management review Customer and interested parties communications Effectiveness of the management system in achieving defined objectives The progress of planned continual improvement activities Continuing operational control

A review of any changes made by the organization which may have impact on the registration Use of accreditation and certification body logos provided to the organization upon registration objectives, targets and programs evaluation of compliance Re-assessment Audits The accreditation body requires that a recertification audit be carried out every three years. The purpose of the recertification audit is to confirm the continued conformity and effectiveness of the management system as a whole, and its continued relevance and applicability for the scope of certification. Additional time may be added to your normal surveillance audit to accomplish this activity. Recertification audits review the performance of the EMS over the registration period, and include a review of previous surveillance audit records. The recertification audit includes the following: A review of the continued effectiveness of the management system in its entirety The continued applicability to the scope of registration The continued relevancy of the organization s policy and objectives The continued effective interaction between the processes of the management system A review of internal audits, management reviews, document changes during this certification period Short Notice Audits It may be necessary for NQA to conduct audits at short notice to investigate complaints, as a result of changes, major nonconformities or suspension. In such cases NQA will describe and make known in advance the conditions under which these short notice visits are to be conducted, and will exercise additional care in the assignment of the audit team because of the lack of opportunity for the client to object to audit team members. Transfer of Certification If a certified organization wishes to transfer their certificate from another certification body to NQA, they will be required to submit a copy of the organization s existing certificate issued by a certification body accredited by a signatory to the IAF MLA. Additionally, the organization will be required to send in the following documents/information: Previous audit reports including outstanding non-conformances & associated corrective actions dating back to either the Initial Registration Assessment or the last re-assessment Outstanding complaints regarding the existing certification & action taken Reasons for seeking transfer Any findings from this review will be documented and handled in a similar manner to the Registration

Assessment. Following the successful completion of the review, the organization will be awarded an NQA ISO 14001 certificate with an expiry date corresponding to the previous certificate. Audits will generally be conducted in the pre-existing schedule moving forward. Multi-Site Registration Who Qualifies? A multi-site organization is defined as an organization having an identified central function (either a central office or headquarters) at which certain activities are planned, controlled or managed and a network of local offices or branches (sites) at which such activities are fully or partially carried out. A multi-site organization need not be a unique legal entity, but all sites shall have a legal or contractual link with the central office of the organization and be subject to a common management system, which is established and subject to continuous surveillance and internal audits by the central office. The organization s management system must be under a centrally controlled and administered plan and be subject to central management review. All sites must be audited in accordance with the organization s internal audit program prior to seeking certification and the organization should demonstrate its ability to collect and analyze data from all sites and initiate organizational change if required. Audit Structure Normally initial audits for certification and subsequent surveillance and recertification audits should take place at every site of the organization that is to be covered by the certification. However, for a multi-site organization a certification body can issue a sampling plan for the sites at the initial audit and subsequent surveillance and recertification audits. We are required to visit the Headquarter site every year, but will visit other sites on a rotating basis, auditing different sites in different years, to ensure that the entire organization conforms to the requirements of the appropriate standard. Revised 4/7/2014