Concepts Products Service Lindner Plus Organisation
Building new solutions. Lindner undertakes major worldwide projects in all areas of interior finishes, insulation technology, industrial services and building facades. From pre-planning through to project completion Lindner is your partner of choice. The Company s extensive manufacturing capability enables quality to be strictly maintained whilst allowing maximum flexibility to meet individual project requirements. Environmental considerations are fundamental to all Lindner s business principles. Through partnerships with clients Lindner turns concepts into reality. Choosing Lindner you have: Lindner Concepts: Tailored solutions specifically geared to satisfy individual project requirements Lindner Products: Quality materials and systems to the very highest industry standards Lindner Service: Comprehensive project management services 2
Lindner Plus Organisation Our range of organised storage components keeps your office and interiors tidy: from shelving and filing systems to whiteboards. Ensuring all your documents are stored perfectly in the right place. 3
Bracket-mounted shelf system The shelf system is hooked into the substructure in the system joints. It is ideally suited for organising folders, books and other office supplies. Shelf system without end supports 001 Flat shelf supports, for hook-on type wood or metal shelving. Material: Powder-coated metal; blockboard coated with white melamine resin, plastic-edged. Shelf system with book-ends 002 Book-ends, for hook-on type wood or metal shelving. Material: Powder-coated metal; blockboard coated with white melamine resin, plastic-edged. 4
Integrated traverse organisation Aluminium rails are integrated into the wood or metal wall panels of Lindner Logic partition walls, enabling organised storage for accessories. Note: The aluminium rails panel option must be specified when ordering the wall panels. The system cannot be retrofitted. 101 Brochure rack 102 Folder rack 5
CD rack 103 104 Picture hook Storage rack 105 6
106 Bookrest 107 Wastepaper bin 108 Cloakroom hook 7
109 Single coat hook 110 Triple coat hook 8
Bracket-mounted traverse organisation An elegant, minimalist rail system that uses special adapters to hook into the vertical system joints. The accessory elements are hooked into the rail. Plastic rollers are attached to the underside of the rails: these rollers can hold loose pages or charts. The accessory elements are secured in the rail and all movable boards are fitted with spacing rollers to avoid scratching the wall. The bracket-mounted traverse organisation system can also be installed on plasterboard or exposed walls. Bracket-mounted organisation rail 201 The bracket-mounted organisation rail is needed for all of the following products except the nonmovable boards. Please select the colour of the decor strip in the rail (see page 16). Adapters for Lindner partition systems are included in delivery. Magnet adapter 202 For attaching the organisation rail to any magnetic surface. This avoids the need to have shelf perforations available in the vertical system joints. 9
Whiteboard, usable on one side Magnetic fixing 203 This board hooks into the rail, where it can slide freely. Material: Anodised aluminium frame, matt silver; whiteboard surface composed of scratch-proof enamelled steel sheet; erasable writing surface. Fabric (pin)board*, usable on one side 204 This board hooks into the rail, where it can slide freely. Material: Anodised aluminium frame, matt silver *Please choose fabric colour; see colour codes on page 16. Sliding board, usable on both sides 205 This board hooks into the rail, where it can slide freely. Range of possible combinations: Magnetic whiteboard + magnetic whiteboard; magnetic whiteboard + fabric* board; fabric* board + fabric* board. Material: Anodised aluminium frame, matt silver; whiteboard surface composed of scratch-proof enamelled steel sheet; erasable writing surface. *Please choose fabric colour; see colour codes on page 16. 10
Projection screen 206 This board hooks into the rail, where it can slide freely. Material: Anodised aluminium frame, matt silver Projection screen with erasable (wet-wipe) writing surface 207 This board hooks into the rail, where it can slide freely. Material: Anodised aluminium frame, matt silver; board surface enamelled steel Non-sliding whiteboard with magnetic fixing 208 The board hooks into the vertical joints of Lindner partition systems and is non-sliding. The bracketmounted organisation rail is not required. Supplied with an integrated organisation groove with edge protection. Material: Anodised aluminium frame, matt silver; whiteboard surface composed of scratch-proof enamelled steel sheet; erasable writing surface. 11
Non-sliding fabric (pin)board* 209 The board attaches to the perforations in the vertical joints of Lindner partition systems and is non-sliding. The bracket-mounted organisation rail is not required. Supplied with an integrated storage groove with edge protection. Material: Anodised aluminium frame, matt silver *Please choose fabric colour; see colour codes on page 16. Storage tray for sliding boards 210 Bolts on to the underside of the board. Usable for both one- and double-sided sliding boards. Available to fit several board widths. Storage rail for one-sided sliding boards 211 Mounted directly under the edge of the sliding board. Usable only for one-sided sliding boards. Available to fit several board widths. 12
Flipchart clip rail 212 Magnetic clip rail, which is attached to a magnetic board. The paper cannot be folded over the top. Flipchart paper is not included. Storage rack 213 Hooks into the rail. Rack can take loads of up to 2 kg. Cloakroom hook 214 Hooks into the rail. 13
Single cloakroom hook 215 Hooks into the rail. 216 Chart clip Hooks into the rail. 217 Hook Plastic hook for wall rails. 14
Starter set 218 Contents: 1 board eraser 1 pack of 10 replacement eraser strips 1 spray bottle of cleaner 4 whiteboard markers 1 marker holder (magnetic) 20 assorted magnets (30 mm) 20 assorted drawing pins 15
Colour codes for fabric-covered boards Colour Code no. White *1 Light grey *2 Anthracite *3 Arctic blue *4 Violet *5 Blue *6 Green *7 Orange *8 Red *9 Linen *L Colour codes for the decor strip Colour White (similar to RAL 9003) Light grey (similar to RAL 7004) Quartz grey (similar to RAL 7039) Dahlia yellow (similar to RAL 1033) Yellow (similar to RAL 1021) Blue green (similar to RAL 6004) Green (similar to RAL 6024) Orange (similar to RAL 2008) Red (similar to RAL 3000) Light red (similar to RAL 2002) Purple red (similar to RAL 3004) Gentian blue (similar to RAL 5010) Blue (similar to RAL 5017) Steel blue (similar to RAL 5011) Brown (similar to RAL 8003) Dark brown (similar to RAL 8014) Black (similar to RAL 9005) Code no. DB01 DB02 DB03 DB04 DB05 DB06 DB07 DB08 DB09 DB10 DB11 DB12 DB13 DB14 DB15 DB16 DB17 16
Other accessories 301 Bracket hook system for coat hanger Material: Stainless steel, buffed 302 Cloakroom hook Material: Stainless steel, buffed Door sign for Lindner partition systems (hook-in system) 303 This door sign hooks into the shelf perforations in the vertical system joints. ; acrylic glass 17
Door sign for Lindner partition systems (screw fixing) 304 The door sign can be screwed onto a door frame, wall panel or drywall. ; acrylic glass Picture hook 305 The picture hook is slipped over the upper edge of the wall panel and is available for wall panels with a thickness of 13 mm or 19 mm. The picture hook can take loads of up to 5 kg. Material: Stainless steel, buffed 18
Information General conditions No guarantee of availability is given for the products depicted in this brochure. Details as given in this brochure are up-to-date and provide information about our products and their areas of application. Information is given without warranty, to the best of our knowledge and in consideration of relevant standards. For installation, follow the manufacturer's installation guidelines and the relevant standards. We reserve the right to make technical changes as a result of product developments. Drawings and photos are for explanatory purposes only. Technical information - Lindner partition systems can take loads of up to 40 kg/per linear metre of wall. This figure should be considered especially as regards the loads placed on storage modules. - Consult an expert before placing storage modules near tee joints in walls. - If storage modules are hooked into the shelf perforations of the vertical system joints, this may reduce the wall's sound protection qualities. - Consult an expert before attaching storage modules to walls that are subject to fire safety regulations. - Variations in colour and finish e.g. on anodised or powder-coated surfaces occur normally during manufacture and cannot be used as reason for a complaint. Special solutions possible on a project-related basis 19
TU_W_ORG/E/1.0 We can do it all for you. Lindner Concepts: - Insulation Engineering - Clean Rooms and Laboratories - Airports and Airlines - Railways and Tunnels - Studios and Concert Halls - Interior Fit-out and Furnishings - Cruise Liner and Ship Fit-out - Hotels and Resorts - General Contracting Lindner Products: - Facades - Roofing Systems - Ceiling Systems - Lights and Lighting Systems - Partition Systems - Doors - Floor Systems - Heating and Cooling Technologies - Dry Lining Systems Lindner Service: - Green Building - Deconstruction and Gutting - Clearance of Harmful Substances - Industrial Scaffolding - Research and Development - Delivery - General Planning - Installation - Maintenance and Industrial Service - Public-Private Partnership (PPP) Lindner Group Bahnhofstrasse 29 94424 Arnstorf Germany Phone +49 (0)8723/20-36 81 Fax +49 (0)8723/20-25 47 partitionsystems@lindner-group.com www.lindner-group.com This document is the intellectual property of Lindner, Arnstorf (Germany). All the information contained in this brochure agrees with the information available at the time of its printing and only serves as advance information. Any possible colour deviations there might be from the original product are caused by printing techniques. Lindner is the sole and exclusive owner of the copyrights as well as the ancillary copyright. All use, and in particular any distribution, reprinting, exploitation or adaptation of this document shall only be allowed with express, written approval by Lindner.