SIMATIC Field PG M3 SIMATIC Programming device Technical Presentation
SIMATIC Field PG M3 Perfect for Project engineering Commissioning Service Maintenance Highlights Rugged, high-performance hardware Intel Core i processor technology 15,6 Widescreen Display, 16:9 size, Full HD (1920x1080), LED Backlight 2x Gigabit Ethernet Bluetooth SIMATIC Engineering Software pre installed Mobility due to powerful rechargeable battery (power for up to 3,5 h) All interfaces integrated Easy-to-replace hard disk unit Integrated Cardreader
Interfaces 2x Gigabit Ethernet COM 1 2 full-fledged network access with high data transfer rate (10 / 100 / 1000 MBit) Combined serial V.24 and TTY interface for connecting S5 modules MPI/Profibus DVI-I Standard connection to current S7 controllers or panels via Profibus Terminal for external monitor or projector; transfer of analogue and digital pictures simultaneously possible; high quality of display in combination with digital flat screens
Interfaces Programming interfaces USB 2.0 (5x) USB 2.0 USB 2.0 For programming SIMATIC Micro Memory Cards, Memory Cards of S7-300, S7-400 and S7-1200 controllers and EPROMs of S5 controllers 480 MBit/sec. maximum data transfer rate for peripheral devices and external data storage devices High current-carrying capacity: Ideally suited for external data carriers such as hard disks etc. Two interfaces on the side of the device Even USB sticks with a "strange shape" can be connected
Interfaces & drives Express Card/ PC Card MODEM Audio Bluetooth DVD-RW Harddisk Cardreader Perfect for ISDN modem, Compact Flash Reader, interface cards, etc. (Express Card/54 / PC Card Types I,II ) Can be connected to any telephone network in the world, for faxing and access to Internet Headphone output and microphone input of the high-definition audio interface. Optimal for Voice-over-IP headsets. Fast wireless data transfer to PDA, mobile phones or digital cameras DVD-RW drive included lateral HDD-slot for quick change of hard disk drive. Adapted for SMC and Multimedia cards (SDHC, MMC, xd, Memory Stick)
Wireless LAN Industrial WLAN Wireless Local Area Network IEEE Standard 802.11a (5 GHz) 802.11b (2,4 GHz) 802.11g (2,4 GHz) 802.11n (2,4GHz/5GHz) 802.11a Few faults perfect with Scalance Industrial WLAN products (11 MBit/s) 802.11b, g Standard Optimal for hotspots and corporate networks (11/54 MBit/s) 802.11n Up to 6x higher data tranfer than 802.11g
Keyboard and touchpad Keyboard Touchpad Status LED Hotkeys Ergonomically designed keyboard. It corresponds to the key distance of a Standard desktop keyboard. Resistant-to-wear laser inscriptions Rugged, high-quality touchpad with adjustable sensitivity, scrolling capability etc. Easy to read status LED inform about device status independent to closed or open display e. g. battery or power supply operation, WLAN on/off or adjustment of display brightness Fast access to important functions such as locking the programming, displaying onscreen menu, WLAN on/off, touchpad on/off, hibernation, standby, display brightness
Mainboard chipset memory Brand new Intel Core i processors Intel Core i5-520 processor (2,4 GHz) QM57 Chipset DDR3 memory with 1066MHz PCIe V2.0 Turbo Boost max. 8GByte* RAM Specials 2 TCPI/IP interfaces for parallel working in 2 different networks Brand new PC HW combined with SIMATIC interfaces *) if 64bit-operating system is used
Intel i5-m520 CPU brand new Intel Core i processor technology Intel Core i5 processor 2 physical cores Intel Hyper-Threading-technic provides intelligent quadruple multitasking each core can run two tasks simultaneously TurboBoost / Powersharing Technology Effective to applications, which are not using multithreading or Multicore Depending on load the cores increase their perfomance (up to 2,66GHz in Dual Core mode, up to 2,93GHz in single core mode) Increase of integrated garphics frequency is possible, if both cores are not working to capacity
Performance PassMark Rating mit CD- und Disk-Mark 1000 986 800 +42% 750 +69% 600 583 400 530 200 0 Field PG M2 Standard Field PG M3 Standard Field PG M2 Pre mium Field PG M3 Premium Significantly increased performance compared to Field PG M2. Significant positioning of Standard u. Premium version.
Mainboard Graphics Integrated graphics Dual Display Resolution Brand new Intel shared memory graphics with high 2D and 3D performance. Support of DirectX 10 and Ready for Windows 7 Control of the integrated display and an external display with different resolutions (e.g. desktop via both screens) 15,6 widescreen-display (16:9 formate), anti-glare with high luminance density Full HD resolution with up to 1920 x 1080 pixels Optimized for working with SIMATIC Software based on TIA Portal.
Replaceable hard disk Easy-to-replace hard disk unit Project engineering Commissioning Service Maintenance Use Cases: Fast alteration of software Software version factory hall A Software version factory hall B Separation of service and office Service hard disk (administrator) Office hard disk (standard user)
Replaceable hard disk optional accessory SIMATIC Field PG M3 accessories Hard disk kit and serial ATA adapter For simple changing between different software versions For creating a duplicate of the existing system Separation of office and service environment Use Cases Simple creation of different software versions Office environment or service software installation Rapid creation of duplicates of the hard disk If necessary, immediate continuation of work with the duplicate is possible In combination with SIMATIC IPC Image & Partition Creator the perfect backup of data in industrial automation.
Other special features Ruggedness Magnesium injection molding housing Body completely made of Magnesium palmrest made of plastics Stable and torsion-resistant keyboard assembly for optimized ergonomics The tool for the SIMATIC Ergonomic, stable handle SIMATIC interfaces on board 15,6 16:9 display in HD ready or Full HD resolution enables optimum, fatigue-free working
SIMATIC Field PG M3 Software Operating systems Windows XP Professional (32-bit) Windows 7 Ultimate* (32-bit) As MUI versions easy to change between diverse languages Windows 7 Application software (for Win XP) Nero Essential 7 Perfect creation of DVDs/CDs Power DVD V7 Optimum replay of films on DVD *) Windows 7 Ultimate 64 bit in preparation
SIMATIC Field PG M3 Engineering Software SIMATIC Software Already preinstalled: STEP 7 Professional STEP 7 Basic STEP 7-Micro/WIN WinCC flexible Advanced STEP 5 (XP only) Ready for immediate use Optimally matching software For immediate productive use Licenses for enabling the SIMATIC software can be ordered with the Field PG M3
Data backup concept SIMATIC IPC Image & Partition Creator SIMATIC IPC Image & Partition Creator V3.0 Backups may be made during operation ( hot processing ) Differential partition backups or incremental file backups Installation on HDD isn t necessary Direct start in running operation w/o installation from USB-flash drive or CD OS independent use Scheduled/cyclical backup 1ClickImage Wizard for backup / recovery / deletion of data Irretrievable, final deletion of data Increasing/decreasing the size of existing system and data partitions w/o data loss Hardware Support of Solid-State Drives and compact flash Compatible to 64-Bit operating systems Field PG M3 SIMATIC IPC (since C-generation) SIMATIC IPC Image & Partition Creator is orderable as optional Field PG M3 accessory.
Optimal integration in the SIMATIC All automation interfaces on board Industrial ruggedness for professional applications Outstanding SIMATIC quality Selected components Preinstalled SIMATIC software Licenses for enabling the SIMATIC software can be ordered with the Field PG M3 Field PG M3 in tune with SIMATIC in 3 ways. SIMATIC Controller.. SIMATIC Software... SIMATIC PGs
Thank you for your attention! Martin Bach Product Manager Engineering Tools and Programmers I IA AS FA PS 3 Gleiwitzer Straße 555 90475 Nuremberg Phone: +49-911-895-4896 Fax: +49-911-895-15 4896 E-Mail: bach.martin@siemens.com