15. Small Lab Equipment Thermomixers Photodocumentation UV Transilluminators Power Supplies ELISA Reader
15 Small Lab Equipment Thermomixers Dry Bath EuroClone Dry Bath is a microprocessor-controlled product using advanced thermoelectric technique. This technique allows more stable and accurate temperature control both in the reaction block and in the sample. Optional aluminium blocks are easily replaceable, to hold different types of test tubes. Dry Bath allows to operate also in programmable mode, linking a maximum of five different temperature steps. User friendly LCD display. Simultaneous display of set and real time and temperature. Versatile and easy to use, meets all experimental requirements. Easy to clean and sanitise. Customized blocks are available on request to suit specific demands. Reliable design with internal extra temperature protection. Temperature deflection adjusting meets all demands. Microprocessor-controlled incubation time and temperature. End of cycle beep-signal. Technical Specifications Temperature Range - 10 C ~ 100 C Timer 1 min ~ 99 h 59 min Temperature Accuracy < ± 0.3 C Display Accuracy 0.1 C Heating rate < 20 min (from 20 C to 100 C) Cooling rate (*) < 30 min (from 20 C to - 10 C) Heating and cooling elements Peltier modules Dimensions (W x D x H) 300 x 220 x 170 mm Weight (with block) 5 Kg Power Supply 230 V 50 Hz Available blocks See EC Block table (*) The instruments reach - 10 C if T ambient is < than 25 C n EMK20 EuroClone Dry Bath - Digital Dry Bath range T - 10 to 100 C - EC block for tubes not included T-Shaker Thermomixers Designed for simultaneous heating and mixing of small samples, T-Shakers are supplied with interchangeable platforms for microtubes. Mixing and heating modes can be used both simultaneously and independently, i.e. the device can work as a shaker and as a thermostat. EMC100 Model controls temperature below ambient, reaching the value of 0 C.EMC100 Model allows to operate also in programmable mode, linking a maximum of five different temperature steps. LCD display. Easy to setup and use. Accurately controls and displays time, temperature and speed. Over heating protection device ensures safety & reliability. Temperature can be calibrated to meet user needs. Silent operation, even below 1.500 rpm. Custom blocks are available to satisfy experimental requirements. Gentle, reliable mixing with long-life direct current motor. n. EMSC100 EMS100 EuroClone T-Shaker Cool - Thermoshaker range T 0-100 C - EC block for tubes not included EuroClone T-Shaker Ambient - Thermoshaker range T RT + 5-100 C - EC block for tubes not included Technical Specifications EMS100 EMSC100 Temperature Range Ambient + 5 C ~ 100 C 0 C ~ 100 C (*) Timer 1 min ~ 99 h 59 min 1 min ~ 99 h 59 min Temperature Accuracy < ± 0.5 C < ± 0.5 C Display Accuracy 0.1 C 0.1 C Mixing speed 200-1500 rpm 200-1500 rpm Amplitude 2 mm 2 mm Heating rate < 15min (from 20 C to 100 C) < 15min (from 20 C to 100 C) Cooling rate (*) < 30 min from T amb. to (T amb. - 20 C) Heating and cooling elements Peltier modules Dimensions (W x D x H) 300 x 220 x 170 mm 300 x 220 x 170 mm Weight (with block) 7 Kg 8.5 Kg Power Supply 230 V 50 Hz 230 V 50 Hz Available blocks See EC Block table See EC Block table (*) If T ambient is < 20 C; 4 C ~ 100 C if T ambient is < 25 C; 10 C ~ 100 C if T ambient is < 30 C 124
Small Lab Equipment 15 Photodocumentation GellyDoc Imaging Systems GellyDoc is a compact and economic system for basic gel documentation. Images of the gel can be seen through the color LCD screen, pictures are captured with the high resolution digital camera and saved into the memory card or instantly printed on the laboratory quality photo printer included with the system. The camera can be connected to a PC with a USB cable (not included) for transferring images. Technical Data DigiCam 60 LCD Screen: Darkroom Emission Filters Transilluminator Color Printer Combination Lock Dimensions Color digital camera 10.0 megapixel SD memory card (16 MB minimum) Power cord included (batteries not required) 5.6 TFT LCD Monitor with video color High resolution screen Mounted on the GellyDoc hood Connected to the camera for preview of images UV blocking viewer window Lightweight and compact Handles for easy transport of the hood Fits on top of the transilluminator EtBr Red 570-640nm The system is designed for use UV Transilluminators with filter sizes not bigger than 21 x 26 cm M-20V and M-26V feature variable intensity settings 300 x 300 resolution 4x6 in. prints USB connectivity 108 prints included Dimensions 7 x 5 x 2.5 in. (178 x 127 x 64 mm) 3 digit resettable combination 2 ft. cable 17H x 13.25W x 9.5D in. (432 x 337 x 241mm) DigiCam 60 color camera with 10.0 megapixel resolution Lightweight, compact hood provides a compact darkroom environment, hood now includes a new UV blocking viewer window that allows the visualization of the gel LCD screen included Benchtop UV Transilluminator delivers back-lit UV; select from several benchtop models (dimension equal or lager than 34 x 24 cm) Color printer generates instant 4" x 6" low cost, laboratory quality color prints Ethidium bromide filter for fluorescent stained gels included Combination lock secures the camera to the darkroom EMF010001 EMF010005 GellyDoc GellyDoc + UV Transilluminator (Cod EM-TCX-26M) 125
15 Small Lab Equipment UV Transilluminators EuroClone has a wide range of UV trasilluminators available either with 8 or 15 Watt lamps with different dimensions even with double wave lenght. Long life UV filters: the filters are design to transmit specific ultraviolet rays and to absorb most of the visible light produced by the UV tubes. They provide the maximum UV transmission over their surface. They have an unlimited life expectancy Ondulex high efficiency reflector. Ondulex is a special polished reflector which provides supreme UV output. The reflector is located behind the UV tubes to reflect the maximum of the light to the outside. The UV intensity of the whole instrument is dramatically increased, as well as its performance Protection Transparent Screen Compact Transilluminators These transilluminators combine compact footprint and economy for laboratories with budget in mind. The fully adjustable UV safety screen can be positioned to suit the operator s viewing angle against exposure to harmful UV rays. The transilluminators are electronically controlled. This reduces the heat and eliminates the flickering effect for gel-documentation. Electronic ballast / Microprocessor controlled No flickering effect thanks to its 25 KHz high frequency The same model can be used from 100 to 240 Volt and from 50 to 60 Hz without any intervention Reduced electrical consumption Unlimited filter life expectancy for 312 and 365 nm Dual intensity selector (100%-70%) Ondulex reflector High UV output Adjustable UV safety screen Stainless steel frame Dimensions Tubes EM-TCX-15M Compact 15,312 15 x 15 cm 6 x 8 Watt EM-TCX-20M Compact 20, 312 20 x 20 cm 6 x 8 Watt EM-TCX-26M Compact 26, 312 21 x 26 cm 6 x 8 Watt Photo UV Transilluminators Photo UV are 15 Watt transilluminators characterized by supreme light stability. With these transilluminators gel visualization and gel documentation is strongly improved. The transilluminator heat is considerably reduced, avoiding the use of extra cooling fan and thus reducing the noise. Thanks to its very high UV output, the transilluminator provides more signal compared to a standard 8-watt transilluminator. High UV output Electronic ballast / Microprocessor controlled No flickering effect thanks to its 25 KHz high frequency Unnecessary cooling due to the electronic control Weight reduction The same model can be used from 100 to 240 Volt and from 50 to 60 Hz without any intervention Reduced electrical consumption Unlimited filter life expectancy for 312 and 365 nm Ondulex reflector Adjustable UV safety screen Stainless steel frame Dimensions Tubes EM-TFX20M Photo UV 20, 312 20 x 20 cm 6 x 15 Watt EM-TFX35M Photo UV 35, 312 20 x 35 cm 6 x 15 Watt If you need a particular model, variable wave lenght, particular dimension, 254 or 365 nm filters or more details please contact our Customer Support (TSA) e-mail: tsa@euroclone.it 126
Small Lab Equipment 15 Power Supplies Mini Pro 300V Power Supply Combining small size and versatility, the newly redesigned Mini Pro 300V power supply is an ideai choice for any researcher. Capable of providing constant voltage or constant current in 1V or 1 ma steps, the unit is perfectly suited to run both vertical polyacrylamide or horizontal agarose gel electrophoresis experiments. Continuous or timed operation are easily performed using the simple and user-friendly interface. The Mini Pro 300V features 2 electrode pairs, allowing for 2 gels to be run simultaneously, saving both time and valuable bench space. With a universal voltage rating, the Mini Pro 300V is also designed and constructed to the most rigorous safety standards. Packages including single or dual horizontal electrophoresis systems and mini vertical electrophoresis systems are excellent choices for educational or personal use. New housing and exterior design Constant voltage or constant current operation 1V step voltage selection; lma step current selection 400mA maximum current 60W maximum power Two pairs of outlet terminals Timer with alarm function Safety device Compact size and lightweight Competitive pricing choice Packages with midi sized horizontal electrophoresis systems and vertical electrophoresis systems EMMINI300 Mini Pro 300V Power Supply MP 300V Power Supply MP 300V Power Supply is a microprocessor-controlled Power Supply with full control range of designated current and/or voltage. Its maximum voltage output is up to 300 V and is designed to meet most electrophoresis needs in a personal, single, easy to use unit. MP 300V Power Supply is capable of running horizontal and vertical electrophoresis, and two-dimensional electrophoresis, SDS-PAGE applications. In addition, a timer with alarm function is also equipped in the unit, and so it is pause function. Furthermore, the powerful specifications plus four pairs of terminators could be used for multi electrophoresis units simultaneously. The design of stackability is another feature to save bench top space. MP300V Power Supply also provides Constant Voltage or Constant Current to instruments used in electrophoresis. Four (4) pairs of terminators and the much powerful specification equipped enable the maximum capability of MP 300V Power Supply series compared to other existing similar products on the market. Output Voltage/Inc 2-300 V/1 V Output Current/Inc 1-700 ma/1 ma Max. Watt 150 W Operating Constants Voltage or Current Control Microprocessor Controller Terminator Pairs 4 pairs Timer 1-999 mins with alarm, continuous No load detect, leakage detect, overload Safety Device detect, load change dectect, over temperature protection, shrouded plugs and sockets Crossover Yes Operating Temperature Ambient to 40 C Unit Dimension W 190 x L 275 x H 95 mm Construction ABS faceplate and aluminum Weight 2.5 kg Rated Voltages 100-240 V EMMP300V MP 300V Power Supply 127
15 Small Lab Equipment MP 500V Power Supply MP 500V Power Supply is a microprocessor-controlled Power Supply for most electrophoresis needs. MP 500V is a programmable mode, and it is capable of running horizontal and vertical electrophoresis, SDS-PAGE, native PAGE applications, two-dimensional electrophoresis, and electroblotting. Furthermore, the powerful specifications plus four pairs of terminators can be used for multi electrophoresis units simultaneously. In addition, a timer with alarm function is equipped in the unit, and so is pause function. MP 500V Power Supply provides Constant Voltage or Constant Current or Constant Power used in electrophoresis. 2.6 LCD shows the running/setting condition and also provides a user friendly interface and convenience to the user. Advanced safety design concerns are outstanding features of MP 500V Power Supply. Output Voltage/Inc 5-500 V/1 V Output Current/Inc 600 ma /1 ma Output Watt/Inc 300 W/1 W Operating Constants Voltage or Current or Power Control Microprocessor Controller Program Storage 30 programmed files Program Multi-Step Up to 6 steps Terminator Pairs 4 pairs LCD Display 2.6 Timer 1-999 mins with alarm, continuous No load detect, leakage detect, overload detect, load Safety Device change detect, over voltage detect, over temperature protection, shrouded plugs and sockets Crossover Yes Operating Temperature Ambient to 40 C Unit Dimension W 190 x L 275 x H 95 mm Construction ABS faceplate and aluminum Weight 2.5 kg Rate Voltages 100-240 V EMMP500V MP 500V Power Supply MP 3AP Power Supply MP 3AP Power Supply is considered as one of the most powerful Power Suppy on the market. It is a microprocessor- controlled Power Supply that can be used for most electrophoresis needs. MP 3AP is also a programmable mode, and it is capable of running horizontal and vertical electrophoresis, SDS-PAGE, native PAGE applications, two-dimensional electrophoresis, and electro-blotting. Furthermore, the powerful specifications plus four pairs of terminator can be used for multi electrophoresis units simultaneously. In addition, a timer with alarm function is equipped in the unit, and so is pause function. MP 3AP Power Supply provides Constant Voltage or Constant Current or Constant Power used in electrophoresis. 2.6 LCD shows the running/setting condition and also provides a user friendly interface and convenience to the user. Advanced safety design concerns are outstanding features of MP 3AP. Output Voltage/Inc 5-300 V/1 V Output Current/Inc 10-3000 ma/1 ma Output Watt/Inc 300 W/ 1W Operating Constants Voltage/current/power Control Microprocessor Controller Program Storage 30 programmed files Program Multi-Step Up to 6 steps Terminator Pairs 4 pairs LCD Display 2.6 Timer 1-999 mins with alarm, continuous No load detect, leakage detect, overload detect, load Safety Device change detect, over voltage detect, over temperature protection, shrouded plugs and sockets Crossover Yes Operating Temperature Ambient to 40 C Unit Dimension W 190 x L 275 x H 95 mm Construction ABS faceplate and aluminum Weight 2.5 kg Rate Voltages 100-240 V EMMP3AP MP 3AP Power Supply 128
Small Lab Equipment 15 ELISA Reader LT-4000 Visible LT-4000 is an absorbance reader suitable for ELISA and the most common colorimetric assays in visible range. The system can either be controlled thorugh the touch screen or by a PC using the Manta Software (supplied with the reader). Multi beam detector Allows a 96 well palte to be read in as little as 5 seconds Touchscreen interface Large clear screen with touchscreen interface allows easy control of instrument and visualization of data Shake mode Allows brief mixing of plate before read to ensure consistent results Large built in memory Allows on board storage of 100 programs and up to 10,000 results Lamp energy saving mode Gratly increases lifespan of the lamp and reduces user maintenance Direct print facility Capable of interfacing with PCL laser printers via USB Short warm up time Instrument is ready to read plates after only 90 second warm up LT-4000 is supplied with 405, 450, 492 and 630 nm filters as standard. A wide range of filters between 400 and 700 Wide range of filters available nm filters are available at low cost for the instrument Wide range of on board data processing available: 1. Absorbance model 2. Cut off mode 3. Single standard mode 4. Point to point mode 9 different calculation modes available 5. % absorbance mode 6. Linear regression mode 7. Index regression mode 8. Logarithm regression mode 9. Exponent regression mode Easy plate layout setup Large touchscreen interface makes it easy to set out plate Integrated dust cover Built in dust cover for plate carrier, keeps detectors free from dust Manta Sofware: Fully featured reader control and data analysis software included Quick start wizard Kinetic reads Custom microplate layouts GLP features Automated data analysis wizard Multiple data views Choice of data export options Technical data Wavelength range: 400 750nm. Photometric Range: 0.000-4.000 Abs Resolution: 0.001 Abs (displayed) 0.0001 Abs (calculated) Light Source Halogen lamp, 8V/50W Wavelengths 405, 450, 492, 630 nm (4 additional filters optional) Wavelength Accuracy: ±1 nm Bandwidth: 8 nm Calculation Method (on-board): Abs, %Abs, cut-off, linear, point to point, log, exponential, power regression Accuracy: ±1% or ±0.005A Reading Speed: 5 seconds for 96-well plate (single wavelength) Shaking Adjustable speed and time Memory 100 tests, up to 10,000 test results Interface: RS-232, PSTN (optional) Display: 6 LCD Input: Touch panel or mouse Output: External printer or software (optional) Net Weight: 8kg. Dimensions: (L x W x H) 460 x 330 x 300 (mm) Power Supply: AC 110V-220V ±10%, 50-60Hz EMLT4000MS EuroClone LT-4000 Visible ABS Reader Step by step design of protocols using Manta software. Allows you to select read type, wavelenth, shake speed/ duration, microplate layout, data export options Manta software allows you carry out single or dual wavelenth kinetic reads using the LT-4000. As a stand-alone instrument the LT-4000 is only able to carry out endpoint (single measurement) reads. Kinetic reads allow you to take multiple readings over a time course Manta has a wide range of preset microplate layotus already setup. You can also setup layouts yourself and label wells with their contents (e.g. blank, standard, control or sample) Allows you to enter user names and further info for each plate Can be setup either before or after reading the plate. If setup after then it will study the assay you have run and suggest the most appropriate data analysis. There is a wealth of qualitative and quantitative data analysis options to choose from. This is a lot more user friendly than rival software programs Choose how you wish to view your data (matrix, table or bar chart) Bar charts can be rotated. Individual graphs can be shown for each well of kinetic data Data and reports can be exported to excel, word or html 129