HYGROTHERMAL PERFORMANCE OF



Similar documents
MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2004) IRISH STANDARD I.S. EN 60062:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING IRISH STANDARD I.S. EN 4179:2006.

FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND

MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 1:

Information supplied by the manufacturer with medical devices

WINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD IRISH STANDARD I.S. EN 1027:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

SHIPS AND MARINE TECHNOLOGY -

EN ISO Safety of machinery Risk assessment. Sicherheit von Maschinen Risikobeurteilung Teil 1: Leitsätze (ISO :2007)

DEUTSCHE NORM June Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178

DEUTSCHE NORM February 2004 DIN EN ISO {

ÖNORM EN The European Standard EN has the status of an Austrian Standard. Edition: Standards group B

EN ISO Biological evaluation of medical devices. Part 1: Evaluation and testing within a risk management process

DEUTSCHE NORM September 2003

HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS STANDARD I.S. EN 14213:2003. Price Code

DEUTSCHE NORM August Steel wire for mechanical springs Part 3: Stainless spring steel wire English version of DIN EN

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN :2000

Part 13: Determination of secant modulus of elasticity in compression

EN ISO Acoustics Audiometric test methods. Part 1: Pure-tone air and bone conduction audiometry

This document is a preview generated by EVS

Metallic products Types of inspection documents

Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

This document is a preview generated by EVS

This document is a preview generated by EVS

ONR CEN/TS Innovation management Part 5: Collaboration management (prcen/ts :2014) DRAFT ICS ;

ÖNORM EN Valve proving systems for automatic shut-off valves for gas burners and gas appliances

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION

Welding coordination Tasks and responsibilities

This document is a preview generated by EVS

English Version. Security service providers - Terminology

This document is a preview generated by EVS

English version. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

Plastics - Verification of pendulum impacttesting machines - Charpy, Izod and tensile

DRAFT ÖNORM EN ISO 11986

ONR CEN/TS Innovation management Part 3: Innovation thinking (prcen/ts :2014) DRAFT ICS ;

Outdoor furniture Seating and tables for camping, domestic and contract use

General requirements for bodies operating assessment and certificationlregistration of quality systems (ISOIIEC Guide 6ZA996)

English Version. Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders

DRAFT ÖNORM EN

This document is a preview generated by EVS

Specification and qualification of welding procedures for metallic materials Welding procedure specification

This document is a preview generated by EVS

Krav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

EESTI STANDARD EVS-EN ISO 877-3:2011

SVENSK STANDARD SS-EN 50271

This document is a preview generated by EVS

Wood flooring and parquet Characteristics, evaluation of conformity and marking

This document is a preview generated by EVS

Installation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms

This document is a preview generated by EVS

Quality requirements for fusion welding of metallic materials

This document is a preview generated by EVS

Skovbrugsmaskiner Sikkerhedskrav til og prøvning af motordrevne stangsave til beskæring Del 2: Maskiner med rygbåret energikilde

ONR CEN/TS Security Requirements for Trustworthy Systems Supporting Server Signing (prcen/ts :2013) DRAFT ICS

DRAFT ÖNORM EN ISO

ICS Supersedes EN 228:2004. English Version. Automotive fuels - Unleaded petrol - Requirements and test methods

Structural steel equal and unequal leg angles

This document is a preview generated by EVS

This document is a preview generated by EVS. Helmets for pedal cyclists and for users of skateboards and roller skates

Employee eligibility to work in the UK

SVENSK STANDARD SS-EN 61235

This document is a preview generated by EVS

The Guardianship Service

1. Perception of the Bancruptcy System Perception of In-court Reorganisation... 4

Conformity assessment Requirements for bodies providing audit and certification of management systems

Naturgas Bestemmelse af sammensætning med defineret usikkerhed ved gaskromatografi Del 2: Usikkerhedsberegninger

Steel rod, bars and wire for cold heading and cold extrusion

NEW PASSENGER CAR REGISTRATIONS BY ALTERNATIVE FUEL TYPE IN THE EUROPEAN UNION 1 Quarter

Aluminium and aluminium alloys Ð Extruded rod/bar, tube and profiles Ð

EESTI STANDARD EVS-EN :2011

Non-destructive testing Ð Ultrasonic examination

Finsäkringar - Säkerhet - Del 3: Särskilda fordringar på miniatyrfinsäkringar. Nationellt förord. Amendment No. 1, 1991*) **)

Credit transfer to Customer account with AS "Meridian Trade Bank" EUR, USD free of charge * Other countries currency information in the Bank

ERASMUS+ MASTER LOANS

Medicininiai sterilizatoriai. Žematemperatūriai gariniai ir formaldehidiniai sterilizatoriai. Reikalavimai ir bandymai

Labour Force Survey 2014 Almost 10 million part-time workers in the EU would have preferred to work more Two-thirds were women

ERASMUS+ MASTER LOANS

English version. Manual for Determination of Combined Heat and Power (CHP)

COMMUNICATION FROM THE COMMISSION

Interneto turinio ir ryšių filtravimo programin įranga ir tarnybos

Safety of machinery - Electrical equipment of machines -- Part 1: General requirements (IEC :2005 (MOD))

41 T Korea, Rep T Netherlands T Japan E Bulgaria T Argentina T Czech Republic T Greece 50.

ISO INTERNATIONAL STANDARD

SURVEY ON THE TRAINING OF GENERAL CARE NURSES IN THE EUROPEAN UNION. The current minimum training requirements for general care nurses

EESTI STANDARD EVS-EN :2007. Health informatics - Electronic health record communication - Part 4: Security

Energy prices in the EU Household electricity prices in the EU rose by 2.9% in 2014 Gas prices up by 2.0% in the EU

This document is a preview generated by EVS

FEDERATION EUROPEENNE DE LA MANUTENTION Product Group. industrial trucks. A brief guide for identification of noncompliant. - Exhaust Emission -

187/ December EU28, euro area and United States GDP growth rates % change over the previous quarter

99/ June EU28, euro area and United States GDP growth rates % change over the previous quarter

ICS Supersedes EN 590:2004. English Version. Automotive fuels - Diesel - Requirements and test methods

This document is a preview generated by EVS

Analysis of statistics 2015

Transcription:

IRISH STANDARD I.S. EN ISO 15927-5:2005 ICS 07.060 91.120.10 HYGROTHERMAL PERFORMANCE OF BUILDINGS - CALCULATION AND PRESENTATION OF CLIMATIC DATA - PART National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie Sales http://www.standards.ie 5: DATA FOR DESIGN HEAT LOAD FOR SPACE HEATING (ISO 15927-5:2004) NSAI 2005 Údarás um Chaighdeáin Náisiúnta na héireann This Irish Standard was published under the authority of the National Standards Authority of Ireland and comes into effect on: February 11, 2005 NO COPYING WITHOUT NSAI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Price Code F

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 15927-5 November 2004 ICS 07.060; 91.120.10 English version Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004) Performance hygrothermique des bâtiments - Calcul et présentation des données climatiques - Partie 5: Données pour la charge calorifique de conception pour le chauffage des locaux (ISO 15927-5:2004) Wärme- und feuchteschutztechnisches Verhalten von Gebäuden - Berechnung und Darstellung von Klimadaten - Teil 5: Bemessungstemperaturen der Außenluft im Winter und zugehörige Winddaten (ISO 15927-5:2004) This European Standard was approved by CEN on 27 October 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. B-1050 Brussels Ref. No. EN ISO 15927-5:2004: E

EN ISO 15927-5:2004 (E) Foreword This document (EN ISO 15927-5:2004) has been prepared by Technical Committee ISO/TC 163 "Thermal insulation" in collaboration with Technical Committee CEN/TC 89 Thermal performance of buildings and building components, the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 15927-5:2004 has been approved by CEN as EN ISO 15927-5:2004 without any modifications. 2

INTERNATIONAL STANDARD ISO 15927-5 First edition 2004-11-15 Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating Performance hygrothermique des bâtiments Calcul et présentation des données climatiques Partie 5: Données pour la charge calorifique de conception pour le chauffage des locaux Reference number ISO 15927-5:2004(E) ISO 2004

The remainder of this document is available for purchase online at www.saiglobal.com/shop SAI Global also carries a wide range of publications from a wide variety of Standards Publishers: Click on the logos to search the database online.