Bulletin HY14-2713-B1/US Series 300 Series 300 and 400 Monoblock Control Valves Series 400 ffective: February 1, 2004 Supersedes: Cat. No. GPD-1025 dated 4/97 Description The Parker Series 300 valve is designed to control singleacting cylinders or a uni-directional hydraulic motors. The spool in this valve is a 3-way, 3-position spool. The positions are power, neutral, and exhaust. B port is always the power port and A port is always plugged. The standard Series 300 valve is spring-centered to neutral position with work port blocked in neutral. Optional spool and spool positioner assemblies are available. This valve which is available in single-spool monoblock housing only, is ideal for general mobile and industrial hydraulic applications. The Parker Series 400 valve is designed to control a doubleacting cylinder or a reversible hydraulic motor. The standard spool for this valve is a 4-way, 3-position spool. The Series 400 valve cannot be converted to a 300 valve. The Series 400 valve does not have a load (reverse flow) check to prevent reverse flow when spool is in transition between neutral and power positions. The spool is spring-centered to neutral position with cylinder ports blocked in neutral. Optional spool and spool positioner assemblies are available. This valve which is available in single-spool monoblock housing only, is ideal for general mobile and industrial hydraulic applications. Features Monoblock body design Available in open center or closed center configurations Built-in, shim-adjustable relief valve Built-in, load (reverse flow) check (series 300 only) Control handles may be mounted in up or down position Numerous spool positioner options available Replaceable, hardened relief valve seats 1 lyria, Ohio, USA
Specifications PRFORMANC CURVS 2 lyria, Ohio, USA
DIMNSIONS - Series 300 and 400 DIMNSIONS AR IN INCHS (MILLIMTRS) AND AR FOR RFRNC ONLY. 3 lyria, Ohio, USA
SPOOL AND POSITIONR OPTIONS 4 lyria, Ohio, USA
HANDL OPTIONS 5 lyria, Ohio, USA
ORDR COD 6 lyria, Ohio, USA
Offer of Sale The items described in this document and other documents or descriptions provided by, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer ( Buyer ) shall be governed by all of the following Terms and Conditions. Buyer s order for any such items, when communicated to, its subsidiary or an authorized distributor ( Seller ) verbally or in writing, shall constitute acceptance of this offer. 1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Seller s products are subject to and shall be governed exclusively by the terms and conditions stated herein. Buyer s acceptance of any offer to sell is limited to these terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and Seller unless expressly accepted in writing by Seller. Seller s acceptance of any offer to purchase by Buyer is expressly conditional upon Buyer s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in Buyer s offer, Acceptance of Seller s products shall in all events constitute such assent. 2. Payment: Payment shall be made by Buyer net 30 days from the date of delivery of the items purchased hereunder. Amounts not timely paid shall bear interest at the maximum rate permitted by law for each month or portion thereof that the Buyer is late in making payment. Any claims by Buyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after Buyer s receipt of the shipment. 3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F.O.B. Seller s plant. Regardless of the method of delivery, however, risk of loss shall pass to Buyer upon Seller s delivery to a carrier. Any delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery. 4. Warranty: Seller warrants that the items sold hereunder shall be free from defects in material or workmanship for a period of 18 months from date of shipment from. THIS WARRANTY COMPRISS TH SOL AND NTIR WARRANTY PRTAINING TO ITMS PROVIDD HRUNDR. SLLR MAKS NO OTHR WARRANTY, GUARANT, OR RPRSNTATION OF ANY KIND WHATSOVR. ALL OTHR WARRANTIS, INCLUDING BUT NOT LIMITD TO, MRCHANTABILITY AND FITNSS FOR PURPOS, WHTHR XPRSS, IMPLID, OR ARISING BY OPRATION OF LAW, TRAD USAG, OR COURS OF DALING AR HRBY DISCLAIMD. NOTWITHSTANDING TH FORGOING, THR AR NO WARRANTIS WHATSOVR ON ITMS BUILT OR ACQUIRD WHOLLY OR PARTIALLY, TO BUYR S DSIGNS OR SPCIFICATIONS. 5. Limitation Of Remedy: SLLR S LIABILITY ARISING FROM OR IN ANY WAY CONNCTD WITH TH ITMS SOLD OR THIS CONTRACT SHALL B LIMITD XCLUSIVLY TO RPAIR OR RPLACMNT OF TH ITMS SOLD OR RFUND OF TH PURCHAS PRIC PAID BY BUYR, AT SLLR S SOL OPTION. IN NO VNT SHALL SLLR B LIABL FOR ANY INCIDNTAL, CONSQUNTIAL OR SPCIAL DAMAGS OF ANY KIND OR NATUR WHATSOVR, INCLUDING BUT NOT LIMITD TO LOST PROFITS ARISING FROM OR IN ANY WAY CONNCTD WITH THIS AGRMNT OR ITMS SOLD HRUNDR, WHTHR ALLGD TO ARIS FROM BRACH OF CONTRACT, XPRSS OR IMPLID WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NGLIGNC, FAILUR TO WARN OR STRICT LIABILITY. 6. Changes, Reschedules and Cancellations: Buyer may request to modify the designs or specifications for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between Buyer and Seller unless accepted by Seller in a written amendment to this Agreement. Acceptance of any such requested modification or cancellation shall be at Seller s discretion, and shall be upon such terms and conditions as Seller may require. 7. Special Tooling: A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 8. Buyer s Property: Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyer s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property, Seller shall not be responsible for any loss or damage to such property while it is in Seller s possession or control. 9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If Buyer claims exemption from any sales, use or other tax imposed by any taxing authority, Buyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable. 10. Indemnity For Infringement of Intellectual Property Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Part 10. Seller will defend and indemnify Buyer against allegations of infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress and trade secrets (hereinafter Intellectual Property Rights ). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual Property Rights of a third party. Seller s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using said item, replace or modify said item so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to items delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. The foregoing provisions of this Part 10 shall constitute Seller s sole and exclusive liability and Buyer s sole and exclusive remedy for infringement of Intellectual Property Rights. If a claim is based on information provided by Buyer or if the design for an item delivered hereunder is specified in whole or in part by Buyer, Buyer shall defend and indemnify Seller for all costs, expenses or judgments resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right. 11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter vents of Force Majeure ). vents of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller s control. 12. ntire Agreement/Governing Law: The terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire Agreement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. This Agreement shall be governed in all respects by the law of the State of Ohio. No actions arising out of the sale of the items sold hereunder or this Agreement may be brought by either party more than two (2) years after the cause of action accrues. 9/91-P 7 lyria, Ohio, USA
FAILUR OR IMPROPR SLCTION OR IMPROPR US OF TH PRODUCTS AND/OR SYSTMS DSCRIBD HRIN OR RLATD ITMS CAN CAUS DATH, PRSONAL INJURY AND PROPRTY DAMAG. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. Copyright 2004,, All Rights Reserved WARNING Offer of Sale The items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the "Offer of Sale". 520 Ternes Avenue lyria, Ohio, USA 44035 Tel: (440) 366-5200 Fax: (440) 366-5253 www.parker.com/hydraulicvalve Bulletin HY14-2713-B1/US, 3C, 2/04, PHD
Bulletin HY14-2715-B1/US Series SP, SPK and SSK Monoblock Control Valves Series SSK ffective: February 1, 2004 Supersedes: Cat. No. GPD-1051 dated 5/98 Features Monoblock body design Available in parallel (SP & SPK) or series (SSK) configurations Available in 1-, 2-, or 3-spool versions (model SSK available in 2-spool only) Adjustable or non-adjustable ball/spring type relief valve. Optional differential poppet, main relief valve available. Specifications Built-in, reverse flow check one check for A port circuit and one for B port circuit in series SP and SPK (one for each spool in series SSK) Control handles may be mounted in up or down position Numerous spool positioner options available (Optional) power-beyond conversion, port outlet available 1 lyria, Ohio, USA
DSCRIPTION Model SP (2-Spool) Model SPK (2-Spool) Model SSK 2 lyria, Ohio, USA
PRFORMANC CURVS 3 lyria, Ohio, USA
SPOOL OPTIONS 4 lyria, Ohio, USA
SPOOL POSITIONR OPTIONS 5 lyria, Ohio, USA
MAIN RLIF VALV OPTIONS HANDL OPTIONS 6 lyria, Ohio, USA
DIMNSIONS - Series SP DIMNSIONS AR IN INCHS (MILLIMTRS) AND AR FOR RFRNC ONLY. 7 lyria, Ohio, USA
DIMNSIONS - Series SSK DIMNSIONS AR IN INCHS (MILLIMTRS) AND AR FOR RFRNC ONLY. 8 lyria, Ohio, USA
DIMNSIONS - Series SPK DIMNSIONS AR IN INCHS (MILLIMTRS) AND AR FOR RFRNC ONLY. 9 lyria, Ohio, USA
ORDR COD - Series SP and SPK 10 lyria, Ohio, USA
ORDR COD - Series SSK 11 lyria, Ohio, USA
FAILUR OR IMPROPR SLCTION OR IMPROPR US OF TH PRODUCTS AND/OR SYSTMS DSCRIBD HRIN OR RLATD ITMS CAN CAUS DATH, PRSONAL INJURY AND PROPRTY DAMAG. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. Copyright 2004,, All Rights Reserved WARNING Offer of Sale The items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the "Offer of Sale". 520 Ternes Avenue lyria, Ohio, USA 44035 Tel: (440) 366-5200 Fax: (440) 366-5253 www.parker.com/hydraulicvalve Bulletin HY14-2715-B1/US, 3C, 2/04, PHD
Mobile Hydraulic Valves Catalog 2400/USA
Mobile Hydraulic Valves Contents Manufacturer's Declaration We hereby declare that the hydraulic and pneumatic components supplied by Parker Hannifin comply with the requirements of C directives, as well as with national and international standards and safety regulations specific to the products. The products are thus authorized for use in machines or machine parts which, from 1995, will require a declaration of conformity in accordance with C Directives on Machinery 89/392/C, as modified by C Directives 91/368/C and 93/44/C, including C symbol. Selected proportional valves with integral electronics and discrete electronic circuit accessory boards will be marked with the C symbol in conformance with the MC directives. In accordance with Appendix II B of the C Directive on Machinery, we are obliged to out that machinery fitted with our products may not be put into service until it has been established that the machine complies with the appropriate directives. For general information, please note that the hydraulic components without electronics distributed by Parker Hannifin do not require any C declaration of conformity and that marking with the C symbol is not authorized. WARNING FAILUR OR IMPROPR SLCTION OR IMPROPR US OF TH PRODUCTS AND/OR SYSTMS DSCRIBD HRIN OR RLATD ITMS CAN CAUS DATH, PRSONAL INJURY AND PROPRTY DAMAG. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. The items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the "Offer of Sale". Copyright 2000,, All Rights Reserved Offer of Sale II
Contents Mobile Hydraulic Valves nbloc Directional Control Valves Series VDP Introduction...nbloc Directional Control Valves... 3-4 Series VDP11 Technical Information...nbloc Directional Control Valves... 5-6, 12-13, 16 Dimensions...nbloc Directional Control Valves...7 Accessories... nbloc Directional Control Valves... 14-15 Ordering Information...nbloc Directional Control Valves... 17 Service Parts...nbloc Directional Control Valves... 25 Series VDP12* Technical Information...nbloc Directional Control Valves... 8-9, 12-13, 16 Dimensions...nbloc Directional Control Valves... 10-11 Accessories... nbloc Directional Control Valves... 14-15 Ordering Information...nbloc Directional Control Valves... 18 Service Parts...nbloc Directional Control valves... 26 Series VY13 Introduction...Auxiliary Control Valves... 19 Technical Information...Auxiliary Control Valves... 20-21 Ordering Information...Auxiliary Control Valves... 24 Service Parts...Auxiliary Control valves... 24 Series VPRP5B Technical Information...Auxiliary Control Valves... 22 Dimensions...Auxiliary Control Valves... 23 Ordering Information...Auxiliary Control Valves... 24 Service Parts...Auxiliary Control valves... 24 1
q
Introduction nbloc Directional Control Valves Series VDP 3
Introduction nbloc Directional Control Valves Series VDP 4
Technical Information nbloc Directional Control Valves Series VDP11 5
Technical Information nbloc Directional Control Valves Series VDP11 6
Dimensions nbloc Directional Control Valves Series VDP11 7
Technical Information nbloc Directional Control Valves Series VDP12, 12H 8
Technical Information nbloc Directional Control Valves Series VDP12, 12H 9
Dimensions nbloc Directional Control Valves Series VDP12, 12H 10
Dimensions nbloc Directional Control Valves Series VDP12 11
12
Technical Information nbloc Directional Control Valves Series VDP11, 12, 12H 13
Accessories nbloc Directional Control Valves Series VDP11, 12, 12H 14
Accessories nbloc Directional Control Valves Series VDP11, 12, 12H 15
Accessories nbloc Directional Control Valves Series VDP11, 12, 12H 16
Ordering Information nbloc Directional Control Valves Series VDP11 VDP 11 10 Valve Directional Parallel Design Number and Type of Spools Variation Seals Power Beyond Detented Spool Option Relief Option 20 GPM 2000 PSI Code Omit V Description Nitrile Fluorocarbon Basic Valve D DD Spool DDD DDDD DDDDD Weight 15 lbs. 19 lbs. 23 lbs. 29 lbs. 35 lbs. Spring Return Spool Adders (Installed In Valve) Code Omit Code Description Part Number H Description Without Power Beyond Sleeve With Power Beyond Sleeve D Spring Centered D Spool Assembly 572024 C Spring Centered C Spool Assembly 572027 S Spring Centered S Spool Assembly 572025 P Spring Centered P Spool Assembly 572026 Three Position Detented Spool Adders (Installed In Valve) Code Description Part Number Omit All Spring Return Spools D* 3 Position Detented D Spool Assembly 572214 S* 3 Position Detented S Spool Assembly 572215 P* 3 Position Detented P Spool Assembly 572216 C* 3 Position Detented C Spool Assembly 602809 *Specifies Spool Position xample: D2 means the second spool assembly is detented. Please Specify in Writing as Separate Line Items Code Description Part Number Description 572016 One Spool Handle Assembly 572017 Two Spool Handle Assembly 572018 Three Spool Handle Assembly 572019 Four Spool Handle Assembly 602842 Five Spool Handle Assembly 665330 Switch Assembly 635794 Spool Cap for Switch Assembly Omit Main Relief Installed and set at 1750 PSI & 1 GPM *** Main Relief at other settings Times 10 = PSI (180 = 1800 PSI) NR Plugged Relief Note: Switch Assemblies and Handles shipped with valve, but not installed to prevent damage in transit. 17
Ordering Information nbloc Directional Control Valves Series VDP12 VDP 12 10 Valve Directional Parallel Design High Pressure Number and Type of Spools Variation Seals Power Beyond Detented Spool Option Main Relief Option 25 GPM 2000 PSI Code Omit Description Nitrile Code Description V Fluorocarbon Omit 25 GPM, 2000 PSI 2, 3, 4, & 6 Spool Valve H 25 GPM, 3000 PSI 1 Spool Valve Only Code Omit Description Without Power Beyond Sleeve Spool Basic Valve Weight H With Power Beyond Sleeve D 17.5 lbs. DD 23.5 lbs. DDD 29.5 lbs. DDDD 35.0 lbs. DDDDDD 49.5 lbs. Spring Return Spool Adders (Installed In Valve) Code Description D Spring Centered D Spool Assy. VDP12 (H) C Spring Centered C Spool Assy. VDP12 (H) S Spring Centered S Spool Assy. VDP12 (H) P Spring Centered P Spool Assy. VDP12 (H) Code Description Omit All Spring Return Spools D* 3 Position Detented D Spool Assembly VDP12 (H) S* 3 Pos. Detented S Spool Assembly VDP12 (H) P* 3 Pos. Detented P Spool Assembly VDP12 (H) C* 3 Pos. Detented C Spool Assembly VDP12 (H) *Specifies Spool Position xample: D2 means the second spool assembly is detented. Please Specify in Writing as Separate Line Items Code Description Part Number Description 825067 One Spool Handle Assy. VDP12H 572017 Two Spool Handle Assy. VDP12 572018 Three Spool Handle Assy. VDP12 572019 Four Spool Handle Assy. VDP12 602672 Six Spool Handle Assy. VDP12 665330 Switch Assembly 635794 Spool Cap for Switch Assembly Note: Part numbers for individual spool assemblies are listed on page 5. Omit Main Relief Installed and set at 1750 PSI & 1 GPM *** Main Relief at other settings Times 10 = PSI (180 = 1800 PSI) NR Plugged Relief Note: Switch Assemblies and Handles shipped with valve, but not installed to prevent damage in transit. 18
Introduction Auxiliary Control Valves Series VY13, VPRP5B 19
Technical Information Auxiliary Control Valves Series VY13 20
Technical Information Auxiliary Control Valves Series VY13 21
Technical Information Auxiliary Control Valves Series VPRP5B 22
Technical Information Auxiliary Control Valves Series VPRP5B 23
Ordering Information Auxiliary Control Valves Series VPRP5B VPRP 5B 3 A A A Valve Pilot Operated Relief Size Adjustment Porting Seals Design Series Valve Setting Code Flow & Pressure Code Type 5B 30 GPM, 2500 PSI A Nitrile Code Description 3 Screw Adjustment Code Inlet Outlet A SA-10 SA-12 Code Setting 175 1750 PSI @ 1 GPM *** Times 10 = PSI @ 1 GPM VY 13 D 1 Valve Auxiliary Series Spool Design Series 4 GPM 2000 PSI Code D Description Double Acting Spool With Checks Service Parts Common Service Parts For VPRP 5B Common Service Parts For VY 13 D1 Part Number Description Part Number Description 592644P VPRP5 Main Relief Assembly 835131K Seal Kit 835127K VPRP5 Seal Kit 835132K Main Relief Rebuild Kit 10HP50N-S VPRP5 Inlet Plug (when valve is used in-line) 686051P Main Relief Assembly 24
Ordering Information Auxiliary Control Valves Series VDP11 Common Service Parts For VDP 11 Part Number Description 572027P Spring Centered C Spool Assembly 572025P Spring Centered S Spool Assembly 572026P Spring Centered P Spool Assembly 572024P Spring Centered D Spool Assembly 572214P 3 Position Detented D Spool Assembly 572215P 3 Position Detented S Spool Assembly 572216P 3 Position Detented P Spool Assembly 602809P 3 Position Detented C Spool Assembly 572023 HPCO (Power Beyond) Sleeve 572016 One Spool Handle Assembly 572017 Two Spool Handle Assembly 572018 Three Spool Handle Assembly 572019 Four Spool Handle Assembly 602842 Five Spool Handle Assembly 592644P Main Relief Valve Assembly 562095P Load Check Assembly 885023AP Spool Cap Assembly 635794 Spool Cap for Switch Assembly 665330 Switch Assembly 612087P Main Relief Plug Assembly 775273 Bleeder Plug for 775725 Spool Cap 885014-1 One Spool Valve Nitrile Seal Kit VDP11 885014-2 Two Spool Valve Nitrile Seal Kit VDP11 885014-3 Three Spool Valve Nitrile Seal Kit VDP11 885014-4 Four Spool Valve Nitrile Seal Kit VDP11 885014-5 Five Spool Valve Nitrile Seal Kit VDP11 885012-1 One Spool Valve Fluorocarbon Seal Kit VDP11 885012-2 Two Spool Valve Fluorocarbon Seal Kit VDP11 885012-3 Three Spool Valve Fluorocarbon Seal Kit VDP11 885012-4 Four Spool Valve Fluorocarbon Seal Kit VDP11 885012-5 Five Spool Valve Fluorocarbon Seal Kit VDP11 885017-1 One Spool Valve Nitrile Rebuild Kit VDP11 885017-2 Two Spool Valve Nitrile Rebuild Kit VDP11 885017-3 Three Spool Valve Nitrile Rebuild Kit VDP11 885017-4 Four Spool Valve Nitrile Rebuild Kit VDP11 885017-5 Five Spool Valve Nitrile Rebuild Kit VDP11 885016-1 One Spool Valve Fluorocarbon Rebuild Kit VDP11 885016-2 Two Spool Valve Fluorocarbon Rebuild Kit VDP11 885016-3 Three Spool Valve Fluorocarbon Rebuild Kit VDP11 885016-4 Four Spool Valve Fluorocarbon Rebuild Kit VDP11 885016-5 Five Spool Valve Fluorocarbon Rebuild Kit VDP11 25
Ordering Information Auxiliary Control Valves Series VDP12, 12H Common Service Parts For VDP 12, 12H Part Number Description 562352P Spring Centered C Spool Assembly VDP12 562093P Spring Centered S Spool Assembly VDP12 562094P Spring Centered P Spool Assembly VDP12 562092P Spring Centered D Spool Assembly VDP12 562251P 3 Position Detented D Spool Assembly VDP12 562252P 3 Position Detented S Spool Assembly VDP12 562253P 3 Position Detented P Spool Assembly VDP12 572261P 3 Position Detented C Spool Assembly VDP12 825487 Spring Centered C Spool Assembly VDP12H 805605P Spring Centered S Spool Assembly VDP12H 805606P Spring Centered P Spool Assembly VDP12H 805607P Spring Centered D Spool Assembly VDP12H 975011P 3 Position Detented D Spool Assembly VDP12H 825074 3 Position Detented P Spool Assembly VDP12H 975012 3 Position Detented C Spool Assembly VDP12H 562381 HPCO (Power Beyond) Fitting VDP12 & 12H 572016 One Spool Handle Assembly VDP12 825067 One Spool Handle Assembly VDP12H 572017 Two Spool Handle Assembly VDP12 572018 Three Spool Handle Assembly VDP12 572019 Four Spool Handle Assembly VDP12 602672 Six Spool Handle Assembly VDP12 592644P Main Relief Valve Assembly VDP12 & 12H 715253P Main Relief Valve Assembly VDP12H 612087P Main Relief Valve Plug Assembly VDP12 & 12H 562095P Load Check Assembly VDP12 572434 Load Check Assembly VDP12H 885023AP Spool Cap Assembly VDP12 or VDP12H 775273 Bleeder Plug for 775725 Spool Cap 635794 Spool Cap for Switch Assembly VDP12 & 12H 665330 Switch Assembly VDP12 & 12H 885015-1 One Spool Valve Nitrile Seal Kit VDP12 & 12H 885015-2 Two Spool Valve Nitrile Seal Kit VDP12 & 12H 885015-3 Three Spool Valve Nitrile Seal Kit VDP12 & 12H 885015-4 Four Spool Valve Nitrile Seal Kit VDP12 & 12H 885015-6 Six Spool Valve Nitrile Seal Kit VDP12 885013-1 One Spool Valve Fluorocarbon Seal Kit VDP12 & 12H 885013-2 Two Spool Valve Fluorocarbon Seal Kit VDP12 & 12H 885013-3 Three Spool Valve Fluorocarbon Seal Kit VDP12 & 12H 885013-4 Four Spool Valve Fluorocarbon Seal Kit VDP12 & 12H 885013-6 Six Spool Valve Fluorocarbon Seal Kit VDP12 885019-1 One Spool Valve Nitrile Rebuild Kit VDP12 & 12H 885019-2 Two Spool Valve Nitrile Rebuild Kit VDP12 & 12H 885019-3 Three Spool Valve Nitrile Rebuild Kit VDP12 & 12H 885019-4 Four Spool Valve Nitrile Rebuild Kit VDP12 & 12H 885019-6 Six Spool Valve Nitrile Rebuild Kit VDP12 885018-1 One Spool Valve Fluorocarbon Rebuild Kit VDP12 & 12H 885018-2 Two Spool Valve Fluorocarbon Rebuild Kit VDP12 & 12H 885018-3 Three Spool Valve Fluorocarbon Rebuild Kit VDP12 & 12H 885018-4 Four Spool Valve Fluorocarbon Rebuild Kit VDP12 & 12H 885018-6 Six Spool Valve Fluorocarbon Rebuild Kit VDP12 26