M bil Brief Product Descriptions

Mobil Product Book.qxd 6/25/04 4:09 PM Page 1 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide M bil Brief Product Descriptions 2004 Edition 3225 GALLOWS ROAD, FAIRFAX, VIRGINIA 22037-0001 For more information, call 1-800-662-4525 or visit us at www.mobil.com Exxon Mobil Corporation 1975, 1977, 1978, 1979, 1981, 1984, 1986, 1989, 1993, 1994, 1995, 1998, 2001, 2002, 2003 Due to continual product research and development, the information contained herein is subject to change without notification.

Mobil Product Book.qxd 6/25/04 4:09 PM Page 2 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide The pages in this book are Recyclable Please Recycle

Mobil Product Book.qxd 6/25/04 4:09 PM Page i chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide TABLE OF CONTENTS INTRODUCTION... ALPHABETICAL INDEX OF MOBIL PRODUCTS... APPLICATION INDEX OF MOBIL PRODUCTS... iii v vii viii xiii BRIEF DESCRIPTIONS/TYPICAL CHARACTERISTICS OF MOBIL LUBRICANTS... 1 41 HEALTH AND SAFETY PRECAUTIONS... 43 45 MATERIAL SAFETY DATA SHEETS (MSDS)... 46 APPENDICES... 47 57 Additives for Premium Lubricating Oils... 47 SAE Grades for Engine Oils... 48 SAE J306 Grades For Gear Oils... 48 ISO Classification System... 49 Grease Consistency Classification: NLGI Classification... 50 Conversion Table... 50 Conversion: API to Specific Gravities... 50 Commercial Engine Oils Chart... 51 Gasoline Engine Oil Application Chart... 52 ANSI-AGMA Industrial Gear Lubricants 9005-D94... 53 Natural Gas Engine Oil Recommendations... 54 Classification Equivalents... 55 Understanding Oil Analysis... 56 Yardmark Interpretation Key... 57 i

Mobil Product Book.qxd 6/25/04 4:09 PM Page ii chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide QUESTIONS? CALL THE MOBIL TECHNICAL SUPPORT CENTER AT 1 (800) 662-4525 OR VISIT OUR WEBSITE AT www.mobil.com ii

Mobil Product Book.qxd 6/25/04 4:09 PM Page iii chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guid INTRODUCTION Mobil branded lubricants are backed by our uncompromising commitment to Performance Innovation Expertise Mobil lubricants are developed to typically exceed original equipment manufacturer (OEM) and industry requirements. Leading edge technology and close OEM involvement enable ExxonMobil scientists to formulate Mobil oils and greases that help achieve peak machine performance. Mobil products are supported by innovative programs and technical expertise to reduce the total cost of lubrication. Ask your ExxonMobil field engineer how he or she can help you reduce expenditures, improve revenues, and/or improve your process and asset management. The 2004 edition of the MOBIL BRIEF PRODUCT DESCRIPTIONS book describes the extensive line of industrial, commercial vehicle, passenger vehicle and marine and aviation lubricants offered by ExxonMobil. This book consists of four sections: Product Indices - Alphabetical Index of Mobil Products Product family names are listed alphabetically with their respective page numbers. Products registered with the US Patent and Trademark Office are designated by the on the shoulder of the mark, for example: Mobil DTE 20 Series. DEXRON and MERCON are registered trademarks of the General Motors and Ford Motor Company, respectively. - Application Index of Mobil Products Applications are listed alphabetically with the page number of the respective product family(s). Lubricant information - Brief Descriptions/Typical Characteristics of Mobil Products Product families are listed alphabetically. The physical properties shown are characteristic of typical production batches. They are not manufacturing specifications. All are subject to change. Health and Safety Precautions Many petroleum products pose potential human health, safety, and environmental hazards. We strongly urge you to read these general precautions thoroughly and obtain the appropriate Material Safety Data Sheets. Appendices These tables and notes contain a variety of useful information such as conversion charts, application charts, a section on Understanding Oil Analysis, Yardmark Interpretation Key, and other recommendations. For additional information about Mobil products, refer to specific product data sheets. They may be obtained on the web at www.mobil.com or by calling the Mobil Technical Support Center at 1-800-662-4525 or from your local ExxonMobil representative. For general information, visit our website at www.mobil.com. If this publication is more than two years old, please contact us to ensure that it is the latest issue. iii

Mobil Product Book.qxd 6/25/04 4:09 PM Page iv chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide QUESTIONS? CALL THE MOBIL TECHNICAL SUPPORT CENTER AT 1 (800) 662-4525 OR VISIT OUR WEBSITE AT www.mobil.com iv

Mobil Product Book.qxd 6/25/04 4:09 PM Page v chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide ALPHABETICAL INDEX OF MOBIL PRODUCTS MOBIL PRODUCT PAGE Curve Grease 213... 1 Gargoyle Arctic Oils... 1 Gargoyle Arctic SHC 200 Series... 1 Gear Lube 375 NC Spray Can... 34 Mobil 1 Motorcycle Oils... 2 Mobil 1 with SuperSyn... 2 Mobil 1 Synthetic ATF... 2 Mobil 1 Synthetic Gear Lubricant... 3 Mobil 1 Synthetic Grease... 3 Mobil 1 Synthetic Spray Lubricant... 3 Mobil Aero HF... 3 Mobil Aero HFA... 4 Mobil Almo 500 Series... 4 Mobil Arctic Turbine 150... 4 Mobil ATF 210... 4 Mobil Aviation Grease SHC 100... 4 Mobil Centaur Moly 1 & 2... 5 Mobil Cylinder Oils... 5 Mobil Delvac 1... 5 Mobil Delvac 1300 Super... 6 Mobil Delvac 1600 Series... 6 Mobil Delvac Hydraulic 10W... 6 Mobil Delvac Xtreme Service Grease... 6 Mobil Drive Clean Plus... 7 Mobil Drive Clean Oil HD 30... 7 Mobil Drive Clean Oils... 7 Mobil DTE 10M Series... 8 Mobil DTE 20 Series... 8 Mobil DTE 724 Oil... 8 Mobil DTE 790 Oil Series... 8 Mobil DTE 800 Series... 9 Mobil DTE Excel Series... 9 Mobil DTE FM 32... 9 Mobil DTE Oil 105... 9 Mobil DTE Oil Named Series... 10 Mobil DTE PM Series... 10 Mobil EAL 224H... 10 Mobil EAL Arctic Series... 11 Mobil EAL Envirosyn H Series... 11 Mobil Glygoyle 22 and 30... 11 Mobil Glygoyle HE Series... 12 Mobil Infinitec 152... 12 Mobil Hydraulic Oil AW Series... 12 Mobil Jet Oil II... 13 Mobil Jet Oil 254... 13 Mobil Mist Lube Series... 13 Mobil Multi-Purpose ATF... 14 Mobil Pegasus 1... 14 Mobil Pegasus 505 (formerly Mobil Pegasus 485)... 15 v

Mobil Product Book.qxd 6/25/04 4:09 PM Page vi chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide ALPHABETICAL INDEX OF MOBIL PRODUCTS (continued) MOBIL PRODUCT PAGE Mobil Pegasus 505-SAE 30 (formerly Mobil Pegasus 385)... 15 Mobil Pegasus 605 (formerly Mobil Pegasus 426)... 15 Mobil Pegasus 610 (formerly Mobil Pegasus 446)... 15 Mobil Pegasus 701 (formerly Mobil Pegasus 490)... 15 Mobil Pegasus 701-SAE 30 (formerly Mobil Pegasus 390)... 15 Mobil Pegasus 710 (formerly Mobil Pegasus 89)... 16 Mobil Pegasus 801 (formerly Mobil Pegasus 100/40)... 16 Mobil Pegasus 801-SAE 30 (formerly Mobil Pegasus 100/30)... 16 Mobil Pegasus 805 Series... 16 Mobil Pegasus 905... 17 Mobil Pegasus Special 15W-40... 17 Mobil Polyrex EM... 17 Mobil Polyrex EP2... 17 Mobil Polyrex 372... 17 Mobil Pyrogard 53... 17 Mobil Pyrogard D... 18 Mobil Rarus 427... 18 Mobil Rarus 800 Series... 18 Mobil Rarus SHC 1020 Series... 19 Mobil SHC 500 Series... 19 Mobil SHC 600 Series... 19 Mobil SHC 800 Series... 20 Mobil SHC PM Series... 20 Mobil Synthetic Oven Lube 1090... 20 Mobil Synturion 6... 20 Mobil Vactra Oil Named Series... 21 Mobil Vactra Oil Numbered Series... 21 Mobil Vacuoline 100 Series... 21 Mobil Vacuoline 500 Series... 22 Mobil Vacuoline Oil 1400 Series... 22 Mobil Vacuum Pump Oil... 22 Mobil Vaprotec Light... 22 Mobil Velocite Oil Series... 23 Mobilarma 200 Series... 23 Mobilarma 500 Series... 23 Mobilarma 777 and 778... 23 Mobilarma 798... 24 Mobilfluid 350... 24 Mobilfluid 424, LT... 24 Mobilgard 1 SHC... 24 Mobilgard M50... 25 Mobilgard 300... 25 Mobilgard 312, 412, 512... 25 Mobilgard M30, M40... 25 Mobilgard 450 NC... 26 Mobilgard 570... 26 Mobilgard ADL Series... 26 Mobilgear 600 Series... 27 Mobilgear SHC 150, 220, 320, 460, and 680... 27 vi

Mobil Product Book.qxd 6/25/04 4:09 PM Page vii chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guid ALPHABETICAL INDEX OF MOBIL PRODUCTS (continued) MOBIL PRODUCT PAGE Mobilgear SHC 1000, 1500, 3200, and 6800... 27 Mobilgear SHC 22M, 46M... 27 Mobilgear SHC XMP 320... 28 Mobilgrease 28... 28 Mobilgrease CM-L, CM-P, CM-S, CM-W... 28 Mobilgrease EAL 100 Series... 29 Mobilgrease FM Series... 29 Mobilgrease HT Series... 29 Mobilgrease Moly 50, 51, 52, 50 Arctic... 30 Mobilgrease XHP 222 and XHP 222 Special... 30 Mobilgrease XTC... 30 Mobilith AW Series... 31 Mobilith SHC 100... 31 Mobilith SHC 220, 221, 460, 007 and 1500... 31 Mobilith SHC PM Series... 32 Mobilmet Alpha, Sigma, Gamma, Omega... 32 Mobilmet Aqua Rho... 32 Mobilmet CCF Series... 32 Mobilmet Upsilon, Omicron, Omicron HD, Nu... 33 Mobilmet 100 Series... 33 Mobilmet TC 30... 33 Mobiltac 325 NC and 375 NC... 34 Mobiltac LL, MM, QQ... 34 Mobiltemp 2... 34 Mobiltemp 78... 34 Mobiltemp SHC 32... 34 Mobiltherm 603, 605... 35 Mobiltrans AST... 35 Mobiltrans HD... 35 Mobiltrans SHC 50... 36 Mobiltrans SHC Arctic... 36 Mobilube HD 80W-140... 36 Mobilube HD LS 80W-90... 37 Mobilube HD Plus... 37 Mobilube SHC... 37 Mobilube XFD... 38 Mobilux EP 023... 38 Mobilux EP 111... 38 Mobilux EP Arctic... 39 Mobilux EP Series... 39 Nyvac FR 200D Fluid... 39 Quaker Quintolubric 822 Series... 39 Quaker Quintolubric 822-EHC... 40 Socony Oven Conveyor Lubricant... 40 Thermrex Series Oils... 40 Vacmul A6 and 2105... 40 Vacmul 280 and 281... 41 Vacmul 3 A, 3 D, 03D, 30 A 20... 41 Vacsul 18F... 41 Whiterex 425... 41 vii

Mobil Product Book.qxd 6/25/04 4:09 PM Page viii chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Gui APPLICATION INDEX OF MOBIL PRODUCTS GREASE APPLICATIONS MOBIL LUBRICANT PAGE Agriculture Equipment Mobil Delvac Xtreme Service Grease...6 Mobilgrease CM-L, CM-P, CM-S, CM-W...28 Mobilgrease XHP 222 and XHP 222 Special...30 Automotive Mobil 1 Synthetic Grease...3 Mobil Infinitec 152...12 Aviation Mobil Aviation Grease SHC 100...5 Mobilgrease 28...28 Bearings General Purpose Mobil Polyrex EP2...17 Mobilgrease XHP 222...30 Mobilith AW Series...31 Mobilith SHC 220, 221, 460, 007 and 1500...31 Mobilux EP Series...39 Couplings Mobilgrease XTC...30 Mobilux EP 111...38 Electric Motor Bearings Mobil Polyrex EM...17 Mobilith SHC 100...31 Mobilith AW Series...31 Environmentally Sensitive Applications Mobilgrease EAL 100 Series...29 Food Processing Mobilgrease FM Series...29 Machinery Gears Mobilith SHC 007...31 Mobilux EP 023...38 High Temperature Applications Mobil Polyrex 372...17 Mobil Polyrex EM...17 Mobil Polyrex EP2...17 Mobilith SHC 220, 221, 460, 007 and 1500...31 Mobilgrease 28...28 Mobiltemp 78...34 Mobiltemp SHC 32...34 Low Temperature Applications Mobilgrease Moly 50 Arctic...30 Mobilith SHC 220, 221, 460, 007 and 1500...31 Mobiltemp SHC 32...34 Mobilux EP Arctic...39 Off-Highway Heavy-Duty Centaur Moly 1 & 2...5 Equipment viii

Mobil Product Book.qxd 6/25/04 4:09 PM Page ix chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide APPLICATION INDEX OF MOBIL PRODUCTS (continued) GREASE APPLICATIONS MOBIL LUBRICANT PAGE Off-Highway Heavy-Duty Mobilgrease CM-L, CM-P, CM-S, CM-W...28 Equipment Mobilgrease Moly 50, 51, 52, 50 Arctic...30 Mobilgrease XHP 222 and XHP 222 Special...30 Paper Machines Mobilith SHC PM Series...32 Mobilith AW Series...31 Railroad Greases Curve Grease 213...1 Mobilith SHC 221...31 Steel Mills Centaur Moly 1 & 2...5 Mobil Polyrex 372...17 Mobil Polyrex EP2...17 Mobilgrease HT Series...29 Trucking Centaur Moly 1 & 2...5 Mobil Delvac Xtreme Service Grease...6 Mobilgrease HT Series...29 Mobilgrease XHP 222 and XHP 222 Special...30 Mobilith SHC 220, 460, 007...31 OIL APPLICATIONS Barrier Fluid Mobil Synturion 6...20 Bearings Mobil Glygoyle 22 and 30...11 Mobil SHC 600 Series...19 Mobil DTE Oil Named Series...10 Mobil Vactra Oil Named Series...21 Compressors, Centrifugal Mobil SHC 600 Series...19 Mobil DTE Oil Named Series...10 Mobil DTE 800 Series...9 Mobil DTE 790 Oil Series...8 Mobil Arctic Turbine 150...4 Compressors, Reciprocating Mobil DTE Oil 105...9 Mobil Rarus 427...18 Mobil Rarus 800 Series...18 Mobil DTE Oil Named Series...10 Compressors, Refrigeration Gargoyle Arctic Oils...1 Gargoyle Arctic SHC 200 Series...1 Mobil EAL Arctic Series...11 Compressors, Rotary Mobil Rarus 800 Series...18 Mobil Rarus SHC 1020 Series...19 Mobil DTE Oil Named Series...10 Mobil SHC 600 Series...19 Couplings Mobilgear 600 Series...27 Mobilgear SHC 1000, 1500, 3200 and 6800...27 ix

Mobil Product Book.qxd 6/25/04 4:09 PM Page x chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide APPLICATION INDEX OF MOBIL PRODUCTS (continued) OIL APPLICATIONS MOBIL LUBRICANT PAGE Cutting Fluids Active Mobilmet Alpha...32 Mobilmet Beta CCF...32 Mobilmet Delta CCF...32 Mobilmet Gamma...32 Mobilmet Kappa CCF...32 Mobilmet Lambda CCF...32 Mobilmet Omega...32 Mobilmet Sigma...32 Mobilmet TC 30...33 Mobilmet Theta CCF...32 Vacmul A6...40 Vacsul 18 F...41 Cutting Fluids Non-Staining Mobilmet Nu...33 Mobilmet Omicron...33 Mobilmet Omicron HD...33 Mobilmet Upsilon...33 Vacmul 280 and 281...41 Cutting Fluids Water Soluble Mobilmet Aqua Rho...32 Mobilmet 100 Series...33 Drive Train, Commercial Vehicle Mobilube HD 80W-140...36 Mobilube HD LS 80W-90...37 Mobilube HD Plus...37 Mobilube SHC...37 Mobilube XFD...38 EDM/Grinding/Honing Vacmul A6 and 2105...40 Electric Motors Oiled Mobil DTE 790 Oil Series...8 Mobil DTE Oil Named Series...10 Mobil SHC 600 Series...19 Engine Oils, Diesel Mobil Delvac 1...5 Mobil Delvac 1600 Series...6 Mobil Delvac 1300 Super...6 Engine Oils, Jet Mobil Jet Oil II...13 Mobil Jet Oil 254...13 x

Mobil Product Book.qxd 6/25/04 4:09 PM Page xi chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide APPLICATION INDEX OF MOBIL PRODUCTS OIL APPLICATIONS MOBIL LUBRICANT PAGE Engine Oils, Marine Crosshead Mobilgard 300...25 Crosshead, Cylinder Mobilgard 570...26 (continued) Trunk Piston Mobilgard 312...25 Mobilgard 412...25 Mobilgard 512...25 Mobilgard 330...25 Mobilgard 430...25 Mobilgard 340...26 Mobilgard 440...26 Mobilgard ADL Series...26 Mobilgard 450 NC...26 Mobilgard M50...25 Mobilgard 1 SHC...24 Engine Oils, Motorcycle Mobil 1 Motorcycle Oils...2 Engine Oils, Passenger Vehicle Mobil 1 with SuperSyn...2 Mobil Drive Clean Oils...7 Mobil Drive Clean Oil HD 30...7 Mobil Drive Clean Plus...7 Gas Engines Ashless Pegasus 701-SAE 30...15 Pegasus 701...15 Pegasus 801-SAE 30...16 Pegasus 801...16 Pegasus Special 15W-40...17 Gas Engines Low Ash Pegasus 1...14 Pegasus 505-SAE 30...15 Pegasus 505...15 Pegasus 805...16 Pegasus 805 Super...16 Pegasus 905...17 Gas Engines Medium Ash Pegasus 710...16 Gas Engines Landfill Pegasus 605...15 Pegasus 610...15 xi

Mobil Product Book.qxd 6/25/04 4:09 PM Page xii chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guid APPLICATION INDEX OF MOBIL PRODUCTS (continued) OIL APPLICATIONS MOBIL LUBRICANT PAGE Gears, Enclosed Mobilgear 600 Series...27 Mobilgear SHC 150, 220, 320, 460, and 680...27 Mobilgear SHC XMP 320...28 Mobil Glygoyle HE Series...12 Mobil SHC 600 Series...19 Mobil DTE Oil Named Series...10 Mobil Cylinder Oils...5 Gears, Open Mobilgear SHC 1000, 1500, 3200, and 6800...27 Mobiltac 325 NC and 375 NC...34 Mobiltac LL, MM, QQ...34 Gear Lube 375 NC Spray Can...34 Gear Oils, Passenger Vehicle Mobil 1 Synthetic Gear Lubricant...3 Mobilube HD 80W-140...36 Mobilube HD Plus...37 Mobilube SHC...37 Heat Transfer Systems Mobiltherm 603 and 605...35 Hydraulic Systems, Aviation Mobil Aero HF...3 Mobil Aero HFA...4 Hydraulics, All Season Mobil DTE 10M Series...8 Hydraulics, Anti-Wear Mobil SHC 500 Series...19 Mobil DTE 20 Series...8 Mobil Hydraulic Oil AW Series...12 Hydraulics, Commercial Vehicle Mobiltrans HD...35 Mobil Delvac Hydraulic 10W...6 Mobil Delvac 1600 Series...6 Mobilfluid 424, LT...24 Mobil DTE 10M Series...8 Mobil Hydraulic Oil AW Series...12 Hydraulics, Environmentally Aware Mobil EAL 224 H...10 Mobil EAL Envirosyn H Series...11 Hydraulics, Fire-resistant Mobil Pyrogard 53...17 Mobil Pyrogard D...18 Nyvac FR 200D Fluid...39 Quaker Quintolubric 822/888...39 Quaker Quintolubric 822-EHC...40 xii

Mobil Product Book.qxd 6/25/04 4:09 PM Page xiii chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Gui APPLICATION INDEX OF MOBIL PRODUCTS (continued) OIL APPLICATIONS MOBIL LUBRICANT PAGE Hydraulics, Food Grade Mobil DTE FM 32...9 Hydraulics, Non-Zinc Mobil DTE Excel Series...9 Hydraulics, R&O Mobil DTE Oil Named Series...10 Mobil Vactra Oil Named Series...21 Pumps Mobil DTE Oil Named Series...10 Mobil SHC 600 Series...19 Mobil SHC 500 Series...19 Mobil DTE 790 Oil Series...8 Mobil DTE 20 Series...8 Mobil Hydraulic Oil AW Series...12 Mobil DTE 10M Series...8 Mobil Vacuum Pump Oil...22 Rust Preventives Mobil Vaprotec Light...22 Mobilarma 200 Series...23 Mobilarma 500 Series...23 Mobilarma 777 and 778...23 Mobilarma 798...24 Transmission Fluids, Mobilfluid 424, LT...24 Commercial Vehicle Mobiltrans AST...35 Mobiltrans HD...35 Mobiltrans SHC 50...36 Mobiltrans SHC Arctic...36 Transmission Fluids, Mobil 1 Synthetic ATF...2 Passenger Vehicle Mobil ATF 210...4 Mobil Multi-Purpose ATF...14 Turbines, Combine Cycle Mobil DTE 800 Series...9 Turbines, Gas Mobil DTE 724 Oil...8 Mobil SHC 800 Series...20 Mobil Arctic Turbine 150...4 Turbines, Steam Mobil DTE 790 Oil Series...8 Mobil DTE Oil Named Series...10 xiii

Mobil Product Book.qxd 6/25/04 4:09 PM Page xiv chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guid QUESTIONS? CALL THE MOBIL TECHNICAL SUPPORT CENTER AT 1 (800) 662-4525 OR VISIT OUR WEBSITE AT www.mobil.com xiv

Mobil Product Book.qxd 6/25/04 4:09 PM Page 1 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Curve Grease 213 is a 3% molybdenum disulfide fortified rail curve and wheel flange grease. The ability of this grease to adhere to wheel flanges is outstanding. It contains special additives which reduce the loss of lubricant that occurs when high-speed trains pass over the treadles, or when the lubricant is applied on the locomotive wheel flange or rail gauge face. Penetration NLGI at 77 F Base Oil Drop Point % Product Grade Thickener Structure Color Worked cst at 40 C C ( F) Moly Curve Grease 213 1 Lithium Smooth/Tacky Gray/Black 325 100 177 (350) 3.0 Gargoyle Arctic Oils are naphthenic oils with very low pour points for the lubrication of reciprocating and rotary refrigeration compressors. They may be used with all types of refrigerants except HFC-134a and sulfur dioxide. They are suitable for a wide range of conditions. Gargoyle Arctic Oil 155 has a Freon-12 floc point of -33 F. Gargoyle Arctic Oil 300 has a Freon-12 floc point of -24 F. (Use with ammonia in screw compressors could cause sludge under severe operating conditions.) Gargoyle Arctic Oil C Heavy is recommended as low temperature circulating oil in refrigeration compressors when intimate mixing with refrigerant is not expected. Gargoyle Arctic Oil C Heavy has a Freon-12 floc point of -33 F. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Gargoyle Arctic Oil 155 0.913-44 374 30 4.5 20 32 Gargoyle Arctic Oil C Heavy 0.907-44 383 46 5.6 30 46 Gargoyle Arctic Oil 300 0.921-44 392 65 6.7 32 68 Gargoyle Arctic SHC 200 Series are synthetic hydrocarbon fluids for the lubrication of refrigeration compressors operating in severe service. Gargoyle Arctic SHC 200 Series oils are suitable for systems using refrigerants such as R12, R114, and ammonia. They may also be used with R22 systems, provided the cooling system is designed for a partially miscible lubricant. Their Freon-12 floc point is -60 F. Gargoyle Arctic SHC 200 Series fluids are recommended for reciprocating and rotary compressors. They have USDA H-1 approval for incidental contact with food. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Gargoyle Arctic SHC 224 0.827-65 425 29 5.7 132 32 Gargoyle Arctic SHC 226 0.834-49 425 68 10.4 148 68 Gargoyle Arctic SHC 230 0.846-38 420 219 25.0 149 220 Gargoyle Arctic SHC 234 0.850-32 510 400 41.0 152 460 1

Mobil Product Book.qxd 6/25/04 4:09 PM Page 2 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil 1 Motorcycle Oils are synthetic fluids and are based on the same technology used in Mobil 1 products but have been optimized specifically for the needs of motorcycles. These products provide the highest level of protection for motorcycles. The unique properties of a synthetic fluid provide natural protection against viscosity shear-down and loss. They offer excellent flow characteristics at low temperatures to reduce wear at start-up, and they offer outstanding protection against high temperature breakdown. Mobil 1 V-Twin 20W-50 is formulated specifically for 4-cycle V twin engines. Mobil 1 MX2T is designed for 2-cycle dirt bikes and Mobil MX4T 10W-40 is recommended for on-road, off-road competition and high performance 4-cycle sport bikes. Grav. Pour Flash Cold Cranking Cold Pumping cst at cst at Product API C ( F) C ( F) cp at C cp at C 40 C 100 C V.I. Mobil MX4T 10W-40 30.5-54 (-65) 253 (487) 2,900 @ -200 11,500 @ -30 86.0 13.8 164 Mobil 1 V-Twin 20W-50 29.4-51 (-60) 270 (518) 2,930 @ -100 8,500 @ -20 130.0 17.7 150 Mobil 1 MX2T 29.1-42 (-44) 88 (190) N/A N/A 90.0 13.7 152 Mobil 1 motor oils are manufactured from 100% synthetic base stocks. Their unique combination of high performance synthetic fluids and proprietary additive systems enables Mobil 1 motor oils to offer advantages beyond their conventional counterparts. Mobil 1 Racing 0W-30 is designed to protect engines even in grueling racing applications and helps deliver maximum horsepower in all engine types and sizes. Mobil 1 motor oils are fully compatible with conventional motor oils. Mobil 1 motor oils are designed for passenger car and light duty truck gasoline or diesel engines requiring API Service SL, SJ or CF. Mobil 1 0W-20, 0W-30, 5W-30 and 10W-30 also meet ILSAC GF-3. Mobil 1 0W-40 is formulated for newer European cars, especially those with advanced-technology, multivalve engines. Mobil 1 15W-50 is suitable for high-performance cars, particularly hot-running or heavily loaded vehicles and high-tech imported cars. Mobil 1 Truck & SUV 5W-40 is formulated for diesel and gasoline engines in hard working trucks and SUVs. Grav. Pour Flash Cold Cranking Cold Pumping cst at cst at Product API F F cp at C cp at C 40 C 100 C V.I. Mobil 1 0W-20-65 446 4,840 @ -35 13,100 @ -40 47.1 8.8 169 Mobil 1 0W-30 34.5-65 450 3,800 @ -35 15,000 @ -40 55.7 10.3 176 Mobil 1 Racing 0W-30 34.7-65 454 5,000 @ -35 15,000 @ -40 56 10.3 175 Mobil 1 0W-40 33.6-65 450 4,300 @ -35 21,900 @ -40 80.3 14.4 185 Mobil 1 5W-30 32.8-54 455 3,600 @ -30 12,500 @ -35 55.8 10.1 169 Mobil 1 10W-30 30.8-49 455 3,848 @ -25 10,700 @ -30 61.3 9.8 145 Mobil 1 15W-50 32.5-49 491 5,234 @ -20 14,050 @ -25 124.7 17.4 155 Mobil 1 Truck & SUV 5W-40 34.2-49 439 - - 102 14.8 151 Mobil 1 Synthetic ATF is a synthetic transmission fluid which provides exceptional performance over a wide range of temperatures. Mobil 1 Synthetic ATF provides outstanding low temperature properties for enhanced operability. In many front-wheel drive vehicles and manual transmissions, Mobil 1 Synthetic ATF will provide excellent gear shifting and protection under severe driving modes. Mobil 1 Synthetic ATF is a superior DEXRON III and MERCON qualified product which meets or exceeds the requirements of Allison C-4, Denison HF-0 pump test, Vickers 35VQ25 vane pump test and Sundstrand piston pump tests. It can also provide good performance in cars originally requiring Ford Type H (M2C166-H) and CJ (M2C138-CJ) fluids. It is not a substitute for Chrysler Type 7176 ATF. Mobil 1 Synthetic ATF is compatible with mineral oil products and all common seal materials. Grav. Pour Flash cp at cp at cst at cst at Product API F F -40 C -20 C 40 C 100 C V.I. Mobil 1 Synthetic ATF 37.6-65 428 6,200 850 35 7.6 198 2

Mobil Product Book.qxd 6/25/04 4:09 PM Page 3 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil 1 Synthetic Gear Lubricant is a 75W-90 multipurpose, synthetic gear oil. This Indy 500 certified product reduces wear and spalling under the high-speed, high-torque, and high horsepower conditions in competitive racing and highperformance cars. Mobil 1 Synthetic Gear Lubricant offers maximum resistance to oil breakdown from heat and highspeed operation, thereby extending service life. It reduces chatter in limited-slip differentials. It also contributes to improved fuel economy when used with Mobil 1 Series or Mobil Delvac 1 synthetic engine oils. Mobil 1 Synthetic Gear Lubricant meets API Service GL-5, MT-1. It can also be used in rear axles where an API service GL-4 lubricant is recommended. It should not be used in any transmissions requiring an engine oil or ATF or GL-4 performance level. Grav. Pour Flash cst at cst at Product API F F 40 C 100 C V.I. Mobil 1 Synthetic Gear Lubricant 33.8-55 401 120 15.9 140 Mobil 1 Synthetic Grease is formulated with synthetic base stocks and a lithium complex thickener. The high viscosity base stock and additives give Mobil 1 Synthetic Grease the ability to lubricate over a wide temperature range, -37 C to +232 C (-35 F to +450 F). It resists water intrusion for proper lubrication of disc brake wheel bearings, suspension joints and steering linkages. This grease provides excellent lubrication protection for components operating under the most severe conditions. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F), min 40 C 100 C Visual Mobil 1 Synthetic Grease 2 Lithium 280 Smooth/ 288 (550) 220 23.8 Red Complex Slight Tack Mobil 1 Synthetic Spray Lubricant is a multipurpose spray lubricant that combines the synthetic base stock technology of Mobil 1 engine oil with additives designed specifically for spray lubricant applications. Mobil 1 Synthetic Spray Lubricant lubricates, protects and cleans, displaces moisture, stops squeaks, and penetrates and loosens rusted parts. It can be used as an around-the-house, industrial, shop, vehicle or boat, general purpose lubricant for gears, hinges, chains, cables, metal parts, joints or surfaces. It will protect metal surfaces from water, rust or corrosion and clean metal surfaces of gum, dirt and grease. Spec. Flash cst at Product Grav. C ( F) 40 C Mobil 1 Synthetic Spray Lubricant 0.815 45 (113) 4.0 Mobil Aero HF is an aviation hydraulic fluid that is U.S. Military Specification MIL-PRF-5606 approved. It is intended primarily for military aircraft and is designated as a NATO code H-515 fluid. It also meets the super clean requirements defined by the low particle count specification. Flash Spec. Pour (PMCC) cst at cst at cst at Color Product Grav. F F -40 C 40 C 100 C Visual V.I. Mobil Aero HF 0.882-85 200 460 13.9 5.1 Red 370 3

Mobil Product Book.qxd 6/25/04 4:09 PM Page 4 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Aero HFA fluid is a mineral-base aviation hydraulic fluid of exceptionally high VI and low pour point. It is suitable for use at temperatures down to -54 C (-65 F). The oil is nongumming, noncorrosive and highly resistant to oxidation. It has the approval of leading manufacturers of aircraft hydraulic equipment. It is also used in industrial equipment for extreme low-temperature applications. This product meets the obsolete U.S. Military Specification MIL-H-5606A quality level. Flash Spec. Pour (COC) cst at cst at cst at Color Product Grav. F F -40 C 40 C 100 C Visual V.I. Mobil Aero HFA 0.882-85 225 450 13.9 5.1 Red 370 Mobil Almo 500 Series air-driven rock drill oils possess high EP characteristics as well as excellent protection against rust. The formulation offers an optimum balance of adhesiveness, yet is emulsifiable enough to pick up moisture carried in the air stream. Mobil Almo 500 Series oils meet all tests and specifications established for heavy-duty rock drill oils. They are also well suited for saw guide operations in the pulp and paper industry because of their good metal-wetting properties. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil Almo 525 0.883-24 188 46 7.3 105 46 Mobil Almo 527 0.899-30 204 113 11.4 91 100 Mobil Almo 529 0.893-24 232 172 16.5 102 150 Mobil Almo 532 0.902-21 232 320 24.9 99 320 Mobil Arctic Turbine 150 is a paraffinic petroleum lubricating oil. This oil has low pour point characteristics and an additive system designed primarily for service in bearing circulation systems of industrial gas turbines and centrifugal compressors. Spec. Pour Flash cst at cst at Product Grav. C C 40 C 100 C V.I. Mobil Arctic Turbine 150 0.864-30 190 32 5.0 95 Mobil Type F ATF is a Type F automatic transmission fluid that is approved against Ford specification M2C33-F. It provides optimum performance in transmissions that still require these specific frictional characteristics for smooth, positive shifting with long-term retention of these properties. Mobil Type F ATF has excellent low-temperature, antifoam, antiwear, and antideposit control characteristics. Grav. Pour Flash cst at cst at Color Product API F F 40 C 100 C Visual V.I. Mobil Type F ATF 31.4-40 320 36 7.2 Red 168 Mobil Aviation Grease SHC 100 is a high performance grease which combines a synthesized hydrocarbon base fluid with a lithium complex thickener. The unique physical properties of the synthetic base oil, combined with selected additives, provide outstanding protection against wear, rust, corrosion, and oxidation. Mobil Aviation Grease SHC 100 is recommended for aviation applications, which need a lubricant that can function normally in extremely high or low temperatures. It has an operating range between -50 F to 180 F. Mobil Aviation Grease SHC 100 is particularly suitable for use in commercial aircraft wheel bearings. Mobil Aviation Grease SHC 100 is approved for use by all the major aircraft wheel and brake manufacturers including Honeywell/Allied Signal, Goodrich, Messier-Bugatti, ABS, Dunlop, and Cleveland. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Mobil Aviation Grease SHC 100 2 Lithium 280 Smooth/ 260 (500) 100 14.5 Red Complex Slight Tack 4

Mobil Product Book.qxd 6/25/04 4:09 PM Page 5 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Centaur Moly 1 & 2 are high performance greases formulated with advanced calcium sulfonate thickener technology. Unlike conventional soap-base thickeners, the calcium sulfonate thickener imparts excellent corrosion and water-resistance properties to the grease, and has inherent extreme pressure properties that enhance load-carrying ability. Fortified with molybdenum disulfide to complement its robust extreme-pressure additive system, Mobil Centaur Moly greases are particularly well suited to meet the demanding lubrication requirements of heavy-duty trucks (king pins, tie rods, u-joints, hinge & bucket pins, and fifth wheels), construction and mining equipment, and heavily loaded industrial bearings. Mobil Centaur Moly greases also provide outstanding resistance against the effects of water washout, water spray-off and corrosion. NLGI Thickener Penetration Drop Point cst at Color Product Grade Type Worked 60x C( F) 40 C Visual Mobil Centaur Moly 1 1 Calcium Sulfonate 325 288(550) 320 Gray Mobil Centaur Moly 2 2 Calcium Sulfonate 265 280(536) 320 Gray Mobil Cylinder Oils are four premium quality, high viscosity lubricants designed for use in steam cylinders, worm gearboxes, couplings and bearings. These oils are designed to protect against rust and corrosion, and provide good film strength, excellent lubricity and resistance to oxidation, foaming, and the washing effect of moisture. Mobil Cylinder Oils are compounded with lubricity agents. Spec. Pour Flash cst at cst at Color ISO Product Grav. C C 40 C 100 C Visual V.I. VG Mobil 600W Cylinder Oil 0.801-9 282 375 27.0 Dark Brown 99 320/460 Mobil 600W Super Cylinder Oil 0.900-6 282 465 30.5 Green 95 460 Mobil Extra Hecla Super Cylinder Oil 0.905 0 282 675 35.8 Dark Green 85 680 Mobil Extra Hecla Super Cylinder Oil Mineral 0.904 3 288 1000 43.0 Dark Green 80 1000 Mobil Delvac 1 5W-40 is a supreme performance, fully synthetic heavy duty diesel engine oil that helps extend engine life, while providing long drain capability and enhanced fuel economy for diesel engines operating in severe applications. The state-of-the-art technology behind Mobil Delvac 1 delivers exceptional performance in both modern, low-emission engines, including refrigerated units, and older, well-maintained engines. Mobil Delvac 1 5W-40 is recommended for use in a wide range of heavy-duty applications and operating environments found in the trucking, mining, construction, and agricultural industries. It is also suitable for gasoline service in mixed diesel/gasoline fleets. Mobil Delvac 1 meets or exceeds the following requirements: API CI-4, CH-4/SL; ACEA E5/E4/E3; Caterpillar ECF-1; Cummins CES 20078/20077/20076; Detroit Diesel DDC 7SE 270 (Four Stroke Cycle); Global DHD-1; JASO DH-1; Mack EO-N Premium Plus 03 and EO-M Plus; Mercedes Benz 288.5; Volvo VDS-3/VDS-2. Mobil Delvac 1 is also recommended for use in applications requiring Allison C-4 and Renault RVI RXD. Grav. Pour Flash cst at cst at % Sulf. Product API F F 40 C 100 C Ash TBN V.I. Mobil Delvac 1 34.1-49 439 102 14.8 1.35 12.0 151 5

Mobil Product Book.qxd 6/25/04 4:09 PM Page 6 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Delvac 1300 Super 10W-30 and 15W-40 are extra high performance heavy duty diesel engine oils that help extend engine life in the most sever on- and off-highway applications. The advanced compenetry of these products delivers exceptional performance in both modern, low-emission engines, as well as older engines operating on low or high sulfur fuel. Mobil Delvac 1300 Super 10W-30 and 15W-40 are recommended for use in a wide range of heavy duty applications and operating environments found in the trucking, mining, construction, quarrying, and agricultural industries. Mobil Delvac 1300 Super 10W-30 and 15W-40 also meet the latest API specifications for gasoline engines and mixed fleets. Mobil Delvac 1300 Super 15W-40 meets or exceeds the following requirements: API CI-4, CH-4/SL; ACEA E5; Caterpillar ECF-1; Cummins CES 20078/20077/20076; Detroit Diesel DDC 7SE 270 (Four Stroke Cycle); Global DHD-1; JASO DH-1; Mack EO-N Premium Plus 03 and EO-M Plus; Mercedes Benz 228.3; Volvo VDS-3/VDS-2, and is also recommended for use in applications requiring Allison C-4. Mobil Delvac 1300 Super 10W-30 meets or exceeds API CI- 4, CH-4/SL; Caterpillar ECF-1; Cummins CES 20078/20076; JASO DH-1; Mack EO-M Plus; Volvo VDS-3/VDS-2. Grav. Pour Flash cst at cst at % Sulf. Product API F F 40 C 100 C Ash TBN V.I. Mobil Delvac 1300 Super 10W-30 31.9-22 444 74 11.5 1.3 12 145 Mobil Delvac 1300 Super 15W-40 29.5-22 446 123 15.6 1.3 12 133 Mobil Delvac 1630, 1640, and 1650 are high performance monograde diesel engine oils formulated from advanced technology components. They are specifically engineered for performance in intercooled, turbocharged engines operating under severe on and off-highway conditions. Mobil Delvac 1600 monogrades are used in a wide range of applications where a monograde lubricant is recommended. Mobil Delvac 1630 and 1640 meet or exceed API CF/SF; MTU Type 2; Mercedes Benz 228.2; MAN 270; Mobil Delvac 1630 is suitable for use in applicaitons requiring Allison C-4. Mobil Delvac 1650 meets or exceeds API CF/SF. Grav. Pour Flash cst at cst at % Sulf. Product API F F 40 C 100 C Ash TBN V.I. Mobil Delvac 1630 27.7-22 482 90 11.5 1.4 12.0 117 Mobil Delvac 1640 27.1-6 493 132 14.7 1.4 12.0 112 Mobil Delvac 1650 26.4 0 554 202 19.5 1.4 12.0 110 Mobil Delvac Hydraulic 10W is a hydraulic oil intended for use in mobile and stationary heavy-duty applications. The product is formulated with high quality base stocks and a unique additive system that has been optimized for hydraulic applications. Mobil Delvac Hydraulic 10W offers effective resistance to wear, oxidation and foaming, and meets Vickers 35VQ25 requirements. This product has excellent low temperature properties and a high viscosity index offering excellent performance in a broad range of operating temperatures. Grav. Pour Flash cp at cst at cst at Product API F F -30 C 40 C 100 C V.I. Mobil Delvac Hydraulic 10W 29.7-22 450 19,000 37.7 6.1 107 Mobil Delvac Xtreme Service Grease is a high performance, heavy-duty truck and heavy equipment grease with excellent extreme-pressure and antiwear properties. It contains a high viscosity base oil and a lithium complex thickener to provide heavy-duty, extended service and water spray-off resistance. The lithium soap, combined with an advanced additive system, deliver outstanding high-temperature performance properties. It is recommended for the lubrication of heavy-duty and extended service automotive and off-highway mobile equipment. It is also an excellent fifth wheel lubricant. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Mobil Delvac Xtreme Service Grease 2 Lithium 280 Smooth/ 260 (500) 320 25 Orange Complex Very Tacky 6

Mobil Product Book.qxd 6/25/04 4:09 PM Page 7 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Drive Clean Plus passenger vehicle engine oils offer synthetic blend formulas tailored to the needs of both newer vehicles and high mileage vehicles. These products are a special combination of premium base oils, high-performance synthetic fluid and 23% more performance additives than Mobil's conventional motor oil. Compared to conventional motor oil, regular use of Mobil Drive Clean Plus Newer Vehicle Formula Synthetic Blend 5W-30 helps: protect critical engine parts; prevent deposit formation in your engine; keep your engine running cleaner longer; and provide longer-lasting protection for hard-working cars and light-duty trucks. Regular use of Mobil Drive Clean Plus High Mileage Formula Synthetic Blend 10W-30 (and 10W-40) helps: clean deposits, build-up and sludge; condition seals to prevent leaks (note: No motor oil can repair damaged seals.); reduce oil consumption; protect critical engine parts; and restore engine performance. Grav. Pour Flash Cold Cranking Cold Pumping cst at cst at Product API F F cp at C cp at C 40 C 100 C V.I. Mobil Drive Clean Plus 5W-30 33.0-42 218 5,860 @ -30 20,800 @ -35 65.0 10.9 159 Mobil Drive Clean Plus 10W-30 30.8-36 228 6,290 @ -25 21,800 @ -30 75.0 11.4 145 Mobil Drive Clean Plus 10W-40 30.9-30 230 6,520 @ -25 24,400 @ -30 97.4 14.3 151 Mobil Drive Clean Oil HD 30 is a mono-grade passenger vehicle engine oil formulated from quality base stocks combined with modern detergents, dispersants, antioxidants, and antiwear additives. It is designed to help keep engines clean and protect against sludge, deposit formation, rust and corrosion under normal engine operating conditions. Mobil Drive Clean Oil HD 30 meets the latest requirements of API SL. It is recommended for use in vehicles or other applications that require a mono-grade SAE 30 engine oil. Grav. Pour Flash cst at cst at Product API F F 40 C 100 C V.I. Mobil Drive Clean Oil HD 30 22.7 0 428 99 11.8 107 Mobil Drive Clean Oils are passenger vehicle engine oils formulated from quality base stocks combined with modern detergents, dispersants, antioxidants, and antiwear additives. These oils are designed to help keep engines clean and protect against sludge, deposit formation, rust and corrosion under normal engine operating conditions. Mobil Drive Clean 5W-20 is specifically designed for late Model Ford and Honda vehicles that recommend a 5W-20 product. Mobil Drive Clean 5W-20 meets Ford specification ESE-M2C-153H. It is recommended for gasoline powered cars and light trucks that manufacturers require this viscosity grade such as 2001 and newer Ford and newer Honda automobiles. It is not recommended for use in other vehicles unless a 5W-20 is recommended. Mobil Drive Clean 5W20, 5W-30 and 10W- 30 meet the latest requirements of API SL and ILSAC GF-3 and are recommended for gasoline powered cars and light trucks. For older vehicles or vehicles that require a higher viscosity grade, Mobil Drive Clean 10W-40 and 20W-50 are recommended. These products meet API SL. Grav. Pour Flash Cold Cranking Cold Pumping cst at cst at Product API F F cp at C cp at C 40 C 100 C V.I. Mobil Drive Clean 5W-20 33.5-33 392 2,200 @ -25 13,200 @ -35 47 8.3 153 Mobil Drive Clean Oil 5W-30 33.0-38 392 5,500 @ -30 17,000 @ -35 62 10.5 159 Mobil Drive Clean Oil 10W-30 30.0-33 392 6,200 @ -25 20,000 @ -30 70 10.4 134 Mobil Drive Clean Oil 10W-40 29.3-27 392 6,100 @ -25 35,000 @ -30 97 14.0 147 Mobil Drive Clean Oil 20W-50 27.4-17 392 8,200 @ -15 24,000 @ -20 162 18.1 124 7

Mobil Product Book.qxd 6/25/04 4:09 PM Page 8 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil DTE 10M Series oils are super premium, wide-temperature, antiwear hydraulic oils with additives for maximized protection. They provide keep-clean performance and are super-stabilized to provide improved filterability, demulsibility, and multimetal compatibility in the presence of water. The Mobil DTE 10M Series oils provide outstanding antiwear protection in all standard industry tests, and are ExxonMobil s primary recommendation for hydraulic applications where low ambient temperatures or rapid changes from low to high temperatures are encountered. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil DTE 11M 0.871-48 390 15 3.9 140 15 Mobil DTE 12M 0.871-48 390 22 4.9 149 22 Mobil DTE 13M 0.877-45 410 33 3.7 141 32 Mobil DTE 15M 0.875-42 420 32 6.1 141 46 Mobil DTE 16M 0.879-45 427 46 7.9 131 68 Mobil DTE 18M 0.887-37 442 100 12.8 124 100 Mobil DTE 19M 0.892-36 514 150 16.6 118 150 Mobil DTE 20 Series oils are super premium antiwear industrial hydraulic oils developed to meet the requirements of all conventional and high-output hydraulic systems. Mobil DTE 21, 24, 25, and 26 contain an excellent balance of selected high-quality base stocks, antiwear agents, and stabilizers for maximized keep-clean and antiwear protection. These premium hydraulic oils are ExxonMobil s primary recommendation for most hydraulic applications in industrial, marine, and mobile service, including high-pressure systems, systems with servo valves, and all robotics in industrial service. Mobil DTE 21 is specifically formulated to meet the exacting requirements for spindle oils set by machine tool manufacturers. In addition, these products are approved in Vickers, Denison HF-0 pump tests. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil DTE 21 0.850-22 345 10 2.7 98 10 Mobil DTE 24 0.871-17 428 32 5.3 98 32 Mobil DTE 25 0.876-17 450 46 6.7 98 46 Mobil DTE 26 0.881-6 457 68 8.5 98 68 Mobil DTE 724 Oil is a gas turbine oil that was developed for higher-output gas turbines such as the General Electric Heavy- Duty Gas Turbine Frame 7000. These turbines demand a lubricant having a higher level of thermal and oxidative stability than conventional steam turbine oils. Mobil DTE 724 Oil meets General Electric specification GEK-32588C & -32588F. Spec. Pour Flash cst at cst at TOST, ISO Product Grav. C C 40 C 100 C Hours V.I. VG Mobil DTE 724 Oil 0.866-12 221 32.0 5.4 7000 107 32 Mobil DTE 790 Oil Series are premium steam turbine oils made from specially refined, high pressure hydrotreated base oils combined with additives that provide exceptional chemical stability, outstanding resistance to oxidation, superior demulsibility, and excellent protection against rust, and deposits. The additives in the DTE 790 Oil Series form a tenacious wear-resistant film on exposed metal surfaces that greatly minimizes wear during the starting and stopping of the turbines. Mobil DTE 790 Oil Series are recommended for use in the circulation systems of direct-connected steam turbines and ring-oiled bearings of geared or direct-connected turbines. Spec. Pour Flash cst at cst at TOST ISO Product Grav. C C 40 C 100 C Hours V.I. VG Mobil DTE 797 Oil 0.85-7 221 30 5.2 6,500 110 32 Mobil DTE 798 Oil 0.862-6 232 44 6.5 5,500 1106 46 Mobil DTE 799 Oil 0.862-6 232 65 8.6 4,500 97 68 8

Mobil Product Book.qxd 6/25/04 4:09 PM Page 9 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil DTE 800 Series oils are super premium turbine oils made from specially refined hydrotreated base oils combined with a customized additive package. They have been developed for high-output gas and steam turbines. They are ideal for combined cycle applications or for the power generator with both steam and gas turbines. Mobil DTE 832 meets the following specifications. Spec. Pour Flash cst at cst at TOST ISO Product Grav. C C 40 C 100 C Hours V.I. VG Mobil DTE 832 0.860-30 224 29.6 5.4 10,000+ 110 32 Mobil DTE 846 0.873-30 244 42.4 6.1 10,000+ 106 46 Mobil DTE Excel Series are super premium, non-zinc, antiwear hydraulic oils that meet the requirements for high-speed, high-pressure piston, vane and gear pumps. These oils are balanced to provide excellent thermal and hydrolytic stability, very good compatibility with metal working coolants and exceptional corrosion protection for copper-based alloys used in axial piston pumps. These products meet or exceed the requirements of Denison HF-0, Vickers and Cincinnati Milacron P-68, P-70 and P-69. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil DTE Excel 32 0.870-27 432 33 5.4 97 32 Mobil DTE Excel 46 0.880-27 438 46 6.7 97 46 Mobil DTE Excel 68 0.880-27 457 68 8.5 97 68 Mobil DTE FM 32 offers good antiwear hydraulic pump protection, excellent oxidation stability, and protection against rust in multiservice applications in the lubrication of food machinery. It is formulated with non-toxic USDA food-grade additives and base oils, qualifying it as a Category H-1 oil under Title 21 CFR 178.3570 for lubricants having incidental contact with food.* Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil DTE FM 32 0.861 10 413 31.9 5.5 106 32 *Listed with NSF. 9

Mobil Product Book.qxd 6/25/04 4:09 PM Page 10 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil DTE Oil Named Series are premium-quality, rust and oxidation inhibited oils designed for use in multifunctional reuse applications such as steam or gas turbines, hydraulic systems, and other industrial applications where long oil life is required. They are manufactured from highly refined turbine oil stocks blended with proper additives to produce a truly service-balanced oil. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil DTE Oil Light 0.867-36 218 30 5.1 102 32 Mobil DTE Oil Medium 0.873-27 221 44 6.5 98 46 Mobil DTE Oil Heavy Medium 0.877-27 223 65 8.4 95 68 Mobil DTE Oil Heavy 0.881-24 237 95 10.9 92 100 Mobil DTE Oil Extra Heavy 0.887-21 272 146 14.7 96 150 Mobil DTE Oil BB 0.890-18 284 218 18.8 96 220 Mobil DTE Oil AA 0.897-12 286 325 24.7 96 320 Mobil DTE Oil HH 0.900-15 288 436 29.4 95 460 Mobil DTE PM Series oils are super premium paper machine circulation system oils. Mobil DTE PM oils are formulated from stable, high quality base stocks and additives to provide superior protection against rust and corrosion, excellent resistance to oxidation and thermal degradation, and a high level of antiwear performance. Mobil DTE PM oils have good demulsibility, which permits water and other contaminants to separate readily from the oil in the system reservoir, and good air release properties to prevent noisy and erratic operation. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil DTE PM 100 0.885-6 240 100 11.4 95 100 Mobil DTE PM 150 0.891-6 250 150 14.8 95 150 Mobil DTE PM 220 0.893-6 260 220 19.1 95 220 Mobil DTE PM 320 0.895-6 250 320 25.4 95 320 Mobil DTE PM Ashless 150 0.890-9 274 150 14.6 97 150 Mobil DTE PM Ashless 220 0.894-6 282 220 18.7 97 220 Mobil EAL 224H is an antiwear hydraulic oil for most hydraulic systems requiring readily biodegradable, nontoxic fluids. It can be used in industrial, marine, and mobile service, including high-pressure systems, systems with servo valves, and all robotics. It is formulated from select, high-quality, high-vi vegetable oils and additives which provide the properties required in hydraulic fluids while satisfying the stringent criteria for biodegradability and toxicity. Mobil EAL 224H provides the excellent antiwear and film-strength characteristics necessary for hydraulic systems operating under moderate conditions. Its 12-stage rating in the FZG Gear Test demonstrates a high level of protection against wear and scuffing. It is approved in the Vickers V-104C and 35VQ25 and various piston pump tests, and meets the requirements of Denison HF-0 and the TP30283A vane pump tests. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil EAL 224H 0.922-18 428 37 8.4 213 32-46 10

Mobil Product Book.qxd 6/25/04 4:09 PM Page 11 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil EAL Arctic Series synthetic refrigeration compressor lubricants are formulated from selected polyol ester basestocks and unique additives which provide outstanding lubricity, wear protection, chemical and thermal stability, and proper miscibility. The products, part of the Mobil EAL (Environmental Awareness Lubricants) family, are specifically developed to lubricate compressors and system components where HFC refrigerants are used. HFCs are ozone-friendly, chlorine-free refrigerants which are replacing CFCs in the world market. The performance of Mobil EAL Arctic Series lubricants has been well documented with HFCs in a wide range of refrigeration and air conditioning systems. Mobil EAL Arctic Series products are available in ISO viscosity grades 22 through 68. Mobil EAL Arctic 22 CC is a special grade of the Mobil EAL Arctic Series that is formulated for use specifically in Copeland refrigeration compressors. The other grades are suitable for use in domestic, commercial and industrial refrigeration and air conditioning systems where HFC refrigerants are used. The products meet the performance requirements of many major compressor and system builders around the world. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil EAL Arctic 22 1.002-70 453 22 4.6 114 22 Mobil EAL Arctic 22 CC 0.991-65 428 23.5 4.91 130 22 Mobil EAL Arctic 32 0.986-54 446 32 5.5 109 32 Mobil EAL Arctic 46 0.975-44 455 46 6.9 104 46 Mobil EAL Arctic 68 0.969-33 464 65 8.3 101 68 Mobil EAL Envirosyn H Series are synthetic antiwear hydraulic oils for most hydraulic systems requiring very high performance hydraulic and circulating oils which are readily biodegradable and virtually non-toxic. They meet or surpass Mannesmann Rexroth, Sauer Sundstrand, Denison and Vickers specifications. Mobil EAL Envirosyn H oils are formulated from high viscosity index synthetic ester basestocks and an advanced additive package which provides excellent oxidation stability, antifoam performance and controlled low-temperature flow properties. They can be used in industrial, marine, and mobile service, including high pressure systems, systems with servo valves and all robotics. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil EAL Envirosyn 32H 0.870-38 514 33 6.4 147 32 Mobil EAL Envirosyn 46H 0.874-49 500 44 7.9 145 46 Mobil EAL Envirosyn 68H 0.884-38 511 69 10.1 138 68 Mobil EAL Envirosyn 100H 0.914-44 534 99 13.5 136 100 Mobil Glygoyle 22 and 30 severe-duty polyglycol lubricants are a family of fully synthetic industrial lubricants developed specifically for use under operating conditions that are beyond the capabilities of mineral oils in plain and antifriction bearings, enclosed industrial gears, and compressors. These lubricants provide superior wear protection, good protection against corrosion in both the liquid and vapor phases, excellent lubricity to decrease friction and bulk oil temperatures, and outstanding thermal and oxidation stability. They are compatible with most seals and gaskets, but do not mix with mineral oils. They are recommended for air compression in either reciprocating or rotary compressors. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil Glygoyle 22 1.007-41 229 177 25.1 173 - Mobil Glygoyle 30 1.006-41 221 224 30.9 181 220 11

Mobil Product Book.qxd 6/25/04 4:09 PM Page 12 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide The Mobil Glygoyle HE Series lubricants are synthetic highly efficient worm gear lubricants made with polyglycol base fluids. They must be kept dry because they do not separate from water and are hygroscopic. They provide a low traction coefficient, therefore, the sliding contacts common to worm gear lubrication generate very low levels of heat, minimizing energy consumption. Spec. Pour Flash cst at cst at Product Grav. C C 40 C 100 C V.I. Mobil Glygoyle HE 460 1.05-30 268 460 77 240 Mobil Glygoyle HE 680 1.05-20 265 680 114 257 Mobil Infinitec 152 is the brand name of an outstanding grease for automotive wheel bearing and chassis applications. It is designed to meet the high-temperature/high-load demands of four-wheel drive truck and sport-utility vehicle wheel bearings. It is recommended for sealed-for-life industrial bearing applications, as well as multi-purpose applications where water resistence and extreme-presure properties are important. Its low oil-bleed properties allow it to be used where minimal leakage is critical. Mobil Infinitec 152 is formulated with a patented lithium-complex thickener system. This unique technology gives the grease up to five times the high-temperature lubrication life over conventional multi-purpose greases.* In additon to high-temperature stability, its 60-lb Timken OK Load and 315-kg-four-ball weld testify to its excellenct extreme presure performance. It contains a polymer that resists the effects of water washout and spray-off. Mobil Infinitec 152 has exceptionally good resistance to shear. Mobil Infinitec 152 exceeds ASTM GC-LB requirements for automotive wheel bearing and chassis applications. NLGI Thickener Penetration Drop Point cst at Product Grade Tupe Worked 60X Structure C( F) 100 C Color Mobil Infinitec 152 2 Lithium Complex** 285 Smooth and Homogeneous 280(536) 148 Blue * As measued by typical ASTM D 3336 Results, ** Modified with proprietary lubrication life enhancing components. Mobil Hydraulic Oil AW Series oils are premium antiwear hydraulic oils developed to meet the requirements of all conventional and high-output industrial hydraulic systems. Mobil Hydraulic Oil AW Series consist of five viscosity grades. These antiwear oils meet major hydraulic pump and component manufacturers specifications, including the Denison HF-0, and Vickers I-286-S and M-2950-S, (AW 32, 46 & 68). The five AW grades are recommended for use in most hydraulic systems with gear, vane, radial piston and axial piston pumps where pressures and speeds require an antiwear product. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil Hydraulic Oil AW 32 0.873-11 374 32 5.4 95 32 Mobil Hydraulic Oil AW 46 0.876-11 388 46 6.7 95 46 Mobil Hydraulic Oil AW 68 0.882 0 399 68 8.5 95 68 Mobil Hydraulic Oil AW 100 0.885 5 399 100 11.1 95 100 Mobil Hydraulic Oil AW 150 0.881 0 420 150 14.6 95 150 12

Mobil Product Book.qxd 6/25/04 4:09 PM Page 13 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Jet Oil II, a second-generation synthetic lubricant, meets all the lubrication requirements of high-performance aircraft gas turbine engines of the turbo-jet, turbo-fan, turbo-prop, and turbo-shaft (helicopter) types in commercial and military service. It also is recommended for aircraft-type gas turbines in industrial and marine applications. Benefits from its use include reduced oil consumption, extended periods between oil drains, extended intervals between engine overhauls, and reduced unscheduled downtime because of lubrication related problems. Mobil Jet Oil II is approved against U.S. Military Specification MIL-PRF-23699. In addition, it is approved by Pratt & Whitney Aircraft Group, United Technologies Corp.; RR/Allison Engine Co.; SNECMA; IAE; and General Electric Co. for their commercial turbine engines. It also is approved by numerous accessory manufacturers, and other turbine engine builders. Spec. Pour Flash cst at cst at cst at Product Grav. F F -40 C 40 C 100 C Mobil Jet Oil II 1.0035-74 518 11,000* 27.6 5.1 * Percent change at -40 C after 72 hours = 0.15% Mobil Jet Oil 254 is a third-generation synthetic lubricant designed for advanced aircraft gas turbine engines of the turbo-jet, turbo-fan, turbo-prop, and turbo-shaft (helicopter) types in commercial and military service. It also is suitable for aircraft-type turbine engines in industrial or marine service. Mobil Jet Oil 254 provides important performance advantages over Type II engine oils. Benefits from its use include bulk oil oxidation reduced by up to 50 percent, deposit control, reduced sludge and carbon deposit formation, longer seal and bearing life, and reduced oil consumption. Mobil Jet Oil 254 is approved against U.S. Military Specification MIL-PRF-23699, high thermal stability (HTS) classification. In addition, it is approved by Pratt & Whitney Aircraft Group, United Technologies Corp.; RR/Allison Engine Co.; SNECMA; IAE; and General Electric Co. for their commercial turbine engines. It also is approved by numerous accessory manufacturers, and other turbine engine builders. Spec. Pour Flash cst at cst at cst at Product Grav. F F -40 C 40 C 100 C Mobil Jet Oil 254 1.0044-80 489 11,500* 26.4 5.3 * Percent change at -40 C after 72 hours = 2.2% Mobil Mist Lube Series oils comprise a family of oils which meet the lubrication requirements of machine components supplied by oil-fog or oil-mist methods. These oils are easily misted through proper devices and can be readily reclassified to large drops on bearing surfaces. They provide excellent wear protection against heavy loads and have good surface-wetting characteristics. The objectionable oil-mist migration common to other oils is almost completely absent when these products are used in properly designed and adjusted systems. Further, they have a good EP rating and oxidation stability. These products have proven to be outstanding mist lubricants for bearings, gears, screws, and metallic ways. Mobil Mist Lube 32 and 34 oils, which are needed for heavily loaded bearings, usually require thermal misting devices. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil Mist Lube 24 0.88-12 210 32 6 110 32 Mobil Mist Lube 27 0.89-12 234 98 11 95 100 Mobil Mist Lube 32 0.90-9 230 320 25 100 320 Mobil Mist Lube 34 0.90-6 238 460 32 100 460 13

Mobil Product Book.qxd 6/25/04 4:09 PM Page 14 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Mercon V Synthetic Blend ATF is a premium synthetic blend lubricant for automatic transmissions and other applications that require a fluid satisfying Ford s Mercon V specification or General Motor s Dexron -III or Dexron II specifications. It is also approved for applications where a Ford Mercon type fluid is recommended. Additionally, Mobil Mercon V Synthetic Blend ATF is suitable for use in both newer and older Chrysler automatic transmission applications where ATF+3 or ATF+4 is recommended. Grav. Pour Flash cst at cp at SUS at Product API C( F) C( F) 100 C -40 C(-40 F) 100 C Mobil Synthetic Blend ATF 34.1-55(-67) 206(403) 7.5 10,500 - Mercon V Mobil Multi-Purpose ATF is a premium automatic transmission fluid meeting many major U.S. and import car manufacturers performance requirements. Mobil Multi-Purpose ATF is qualified by General Motors Corporation as a DEXRON III fluid. It is qualified by Ford for its MERCON requirement and may be used in cars requiring Ford Type CJ and H fluids. It can also be used in off-highway transmissions, power steering, and other hydraulic systems requiring a Allison C-4 fluid. It is recommended for the exacting industrial hydraulic oils demands of Denison HF-0, Vickers vane, and Sundstrand piston pumps. Grav. Pour Flash cp at cst at cst at Color Product API F F -40 C 40 C 100 C Visual V.I. Mobil Multi-Purpose ATF 31.3-45 370 17,400 36 7.5 Red 184 Mobil Pegasus Products Table of Name Changes Formerly Changed To Mobil Pegasus 89 Mobil Pegasus 710 Mobil Pegasus 100/30 Mobil Pegasus 801-SAE 30 Mobil Pegasus 100/40 Mobil Pegasus 801 Mobil Pegasus 385 Mobil Pegasus 505-SAE 30 Mobil Pegasus 485 Mobil Pegasus 505 Mobil Pegasus 390 Mobil Pegasus 701-SAE 30 Mobil Pegasus 490 Mobil Pegasus 701 Mobil Pegasus 426 Mobil Pegasus 605 Mobil Pegasus 446 Mobil Pegasus 610 Mobil Pegasus 1 is a high-performance synthetic low ash natural gas engine oil ideal for most gas engines and operating conditions. The product can provide optimum performance in Caterpillar, Superior, Waukesha, and other turbocharged and naturally aspirated medium-to-high-speed gas engines requiring a low-to-medium ash level product. Mobil Pegasus 1 will also provide outstanding service in four-cycle gas engines starting and operating under very low ambient conditions and in remote control gathering field applications, or applications at very high operating temperatures. Mobil Pegasus 1, with its naturally higher viscosity index, provides a superior protective film at temperatures up to 38 C (100 F) above the limit for conventional mineral oils. It flows at -54 C (-65 F) without VI improvers. Also, Mobil Pegasus 1 is ideally suited for co-generation and ebullient-cooled applications because of its wide temperature range and long oil and engine life protection. SAE Grav. Pour Flash cst at cst at % Sulf. Product Grade API C C 40 C 100 C V.I. TBN Ash Mobil Pegasus 1 15W-40 34.1-48 238 94 13.0 136 6.5 0.51 14

Mobil Product Book.qxd 6/25/04 4:09 PM Page 15 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Pegasus 505-SAE 30 and Mobil Pegasus 505 (formerly Mobil Pegasus 385 and 485) are low ash natural gas engine oils that are SAE 30- and 40-grade oils respectively. They are premium quality gas engine oils formulated with low ash dispersants and additives that provide high-temperature antiscuff and antiscoring capabilities. They meet the special requirements of the most modern high-specific-output or ambient-rated turbocharged engines operating continuously at, or in excess of, rated capacity at high temperatures and high output. They also meet the requirements of slow-speed, two-cycle and four-cycle engines operating under normal service conditions. Mobil Pegasus oils are field proven and approved by many builders of natural gas engines. Dresser-Rand, for example, approves Mobil Pegasus 505-SAE 30 for naturally aspirated models (Category I), for low-level, turbocharged engines (Category II), and for high-level turbocharged units (Category III). SAE Grav. Pour Flash cst at cst at % Sulf. Product Grade API C C 40 C 100 C V.I. TBN Ash Mobil Pegasus 505-SAE 30 30 29.0-15 236 85 10 97 2.7 0.46 Mobil Pegasus 505 40 28.0-15 238 126 13 97 2.7 0.46 Mobil Pegasus 605 (formerly Mobil Pegasus 426) and Mobil Pegasus 610 (formerly Mobil Pegasus 446) are SAE 40- grade natural gas engine oils designed for engines running on landfill gas or sour gas. These require enough TBN reserve and alkalinity retention to neutralize acidic components such as Total Organic Halide as Chloride (TOHCI) and/or H2S at moderate levels. The products provide outstanding protection for turbocharged and naturally aspirated, mediumand high-speed, four-cycle Caterpillar, Superior, and Waukesha gas engines requiring a product of low to medium ash level. Mobil Pegasus 605 and 610 do not contain zinc or phosphorus, so can be used in both three-way and selective catalytic systems. They are highly dispersant oils with a special detergent additive system that protects against corrosion. Its lower ash level helps control combustion chamber ash build-up. SAE Grav. Pour Flash cst at cst at % Sulf. Product Grade API C C 40 C 100 C V.I. TBN Ash Mobil Pegasus 605 40 27.5-15 262 124 14 100 4.9 0.52 Mobil Pegasus 610 40 27.5-18 264 130 14 102 8.6 0.98 Mobil Pegasus 701-SAE 30 and Mobil Pegasus 701 (formerly Mobil Pegasus 390 and 490) ashless natural gas engine oils are SAE 30- and 40-grade oils, respectively. They are premium-quality gas engine oils formulated with ashless dispersants, effective oxidation and corrosion inhibitors, and antiwear agents. They provide excellent dispersancy, and good high-temperature detergency and stability. Carbon and ash deposits are negligible. Mobil Pegasus 701-SAE 30 and 701 are recommended for all high-speed gas engines. They are also suitable for modern two- and four-cycle, slowspeed gas engines except where severity of application requires special heavy-duty, load-carrying performance. Mobil Pegasus oils are field-proven and approved by many builders of natural gas engines. Dresser-Rand, for example, approves Mobil Pegasus 701-SAE 30 for naturally aspirated models (Category I) and for low-level turbocharged engines (Category II). SAE Grav. Pour Flash cst at cst at % Sulf. Product Grade API C C 40 C 100 C V.I. TBN Ash Mobil Pegasus 701-SAE 30 30 29.0-15 238 85 10 97 2.2 0.07 Mobil Pegasus 701 40 28.2-15 249 132 13 97 2.2 0.07 15

Mobil Product Book.qxd 6/25/04 4:09 PM Page 16 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Pegasus 710 (formerly Mobil Pegasus 89) is designed to provide the highest level performance and protection in Superior, Waukesha, and other turbocharged and naturally aspirated, medium- to high-speed, four-cycle natural gas engines requiring a product of medium-ash level. It minimizes ash deposits in cooler-combustion, lean-burn engines and in stoichiometric engines showing lower levels of oil consumption. With its low levels of zinc and phosphorus, Mobil Pegasus 710 can be used in engines equipped with catalytic converters that require oils of medium ash content. It also can be used in gas engines when alternative sources for fuel gas contain low levels of chlorine and sulfur compounds. Mobil Pegasus 710 gas engine oil provides excellent oxidation, nitration, and thermal stability, reduced levels of carbon and sludge formation, and longer oil and filter life. It has superior resistance to foaming, exhibits good demulsibility, and provides protection against corrosion. SAE Grav. Pour Flash cst at cst at % Sulf. Product Grade API C C 40 C 100 C V.I. TBN Ash Mobil Pegasus 710 40 28.0-15 249 121 13 98 6.5 0.94 Mobil Pegasus 801-SAE 30 and Mobil Pegasus 801 (formerly Mobil Pegasus 100/30 and 100/40) oils are a new generation of ashless dispersant and antiscuff natural gas engine oils in SAE 30 and 40 viscosity grades. They are intended to provide superior cleanliness and optimum wear protection in the most severe engines and applications, without the disadvantage of ash deposits. Mobil Pegasus 801-SAE 30 and 801 gas engine oils have demonstrated superior performance over an exceptionally wide range of engines and operating conditions. These oils are the primary recommendation for mixed engine operations. Mobil Pegasus 801-SAE 30 is approved for all service levels of Dresser Rand (categories I, II and III). SAE Grav. Pour Flash cst at cst at % Sulf. Product Grade API C C 40 C 100 C V.I. TBN Ash Mobil Pegasus 801-SAE 30 30 28.9-15 238 83 10 97 2.8 0.13 Mobil Pegasus 801 40 28.2-15 249 132 13.2 97 2.8 0.13 Mobil Pegasus 805 Series are SAE 40 and 15W-40 grade natural gas engine oils designed to provide excellent oxidation and nitration resistance, thermal stability and extended oil life in Caterpillar, Superior, Waukesha, and other turbocharged, naturally aspirated, medium- to high-speed, four cycle gas engines requiring a low ash level product. They minimize ash deposits in lean-burn engines and in stoichiometric engines. Mobil Pegasus 805 and 805 Super can be used in engines equipped with catalytic converters and in engines utilizing alternate fuel sources that contain low levels of chlorine and sulfur compounds. Mobil Pegasus 805 Super exhibits high-ash performance characteristics and offers outstanding valve face and seat protection, optimized engine cleanliness, and control of deposit formation. SAE Grav. Pour Flash cst at cst at % Sulf. Product Grade API C C 40 C 100 C V.I. TBN Ash Mobil Pegasus 805 40 27.3-12 262 130 13.5 99 6.2.54 Mobil Pegasus 805 Super 15W-40 29.5-30 224 115 14.5 128 6.4.52 Mobil Pegasus 905 is our latest technology SAE 40 natural gas engine oil designed to provide superior oxidation and thermal stability creating the opportunity to extend oil drain intervals and decrease oil consumption. Mobil Pegasus 905 is made from the highest quality base oils and advanced additive technology to provide outstanding wear protection and help control deposit formation. Mobil Pegasus 905 is designed for use in Caterpillar, Jenbacker, Waukesha, and other turbocharged, naturally aspirated, medium to high speed, four-cycle gas engines requiring a low-ash level product. SAE Grav. Pour Flash cst at cst at % Sulf. Product Grade API C C 40 C 100 C V.I. TBN Ash Mobil Pegasus 905 40 29.3-21 247 125 13 97 6.2.54 16

Mobil Product Book.qxd 6/25/04 4:09 PM Page 17 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Pegasus Special 15W-40 is a high quality multigrade SAE 15W-40 ashless detergent natural gas engine oil. It is formulated with effective oxidation and corrosion inhibitors, antiwear agents and shear-stable VI improvers for multigrade performance. The oil provides excellent dispersancy, good high-temperature detergency and stability, and effective protection against corrosion. Low temperature starting capability when using Mobil Pegasus Special 15W-40 makes it particularly suitable for two- and four-cycle engines in remote locations and for mainline stations that are shut down for long periods in the winter, then started on short notice without warming the lube and coolant system. SAE Grav. Pour Flash cp at cst at cst at % Sulf. Product Grade API C C 25 F 40 C 100 C V.I. TBN Ash Mobil Pegasus Special 15W-40 15W-40 30.2-36 236 24,700 104 13.5 132 2.5 0.07 Mobil Polyrex EM grease contains advanced polyurea thickener that has low noise characteristics, excellent mechanical shear stability, water resistance, and long life. Mobil Polyrex EM performs well in the EMCOR rust test, even with 10% synthetic seawater, typically exhibiting no rust. Mobil Polyrex EM is used as a factory-fill grease by several electric motor bearing manufacturers because it maintains its consistency under high shear conditions. It has outstanding high temperature stability as shown in the ASTM D 3336 High Temperature Grease Life test. High temperature stability leads to long-life characteristics, highly recommended for sealed-for-life applications, like electric motors, and also for ball or lightly loaded roller bearings operating at high temperatures where low oil separation is important. NLGI Thickener Worked Drop Point cst at cst at Product Grade Type 60X Structure C ( F) 40 C 100 C Color Polyrex EM 2 Polyurea 280 Smooth and Homogeneous 288 (550) 115 12.2 Blue Mobil Polyrex EP2 contains proprietary EP additives that protect against wear and provide extreme-pressure protection up to 350 F. Its 4-Ball Weld and High Temperature Grease Life test results are significantly better than most multipurpose greases. Combined with its exceptional water resistance, these properties make Mobil Polyrex EP2 an excellent choice for general industrial applications as well as equipment that is subjected to high temperatures, high loads, or is exposed to large amounts of water. NLGI Thickener Worked Drop Point cst at cst at Product Grade Type 60X Structure C ( F) 40 C 100 C Color Polyrex EP2 2 Polyurea 280 Smooth and Homogenous 265 ( 509) 235 18.4 Green Mobil Polyrex 372 is a heavy-duty, multipurpose, extreme pressure NLGI No. 2 ployurea grease with exceptional high temperature, water resistance, and shear stable properties. Mobil Polyrex 372 contains a high viscosity base oil in combination with EP additives to provide exceptional performance in demanding slow-speed, heavily-loaded conditions. Mobil Polyrex 372 meets the demanding conditions of current industrial and off-highway equipment. The grease will not support combustion when impacted by sparks or slag that are common in hot rolling operations. Base Oil NLGI Penetration at Drop Point cst at Color Product Grade Thickener 77 F Worked C ( F) 40 C Visual Mobil Polyrex 372 2 Polyurea 285 280 (536) 370 Green Mobil Pyrogard 53 is a synthetic phosphate ester fire-resistant hydraulic fluid. Mobil Pyrogard 53 has excellent resistance to oxidation, foaming, and hydrolysis, and separates readily from water. Factory Mutual (FM) has approved Mobil Pyrogard 53 as a less-hazardous hydraulic fluid. Butyl, Viton, EPR or equivalent elastomers are compatible with Mobil Pyrogard 53. Mobil Pyrogard 53 is not compatible with Buna-N, Neoprene, SBR or natural rubber. Spec. Pour Flash Fire cst at cst at Color Product Grav. F F F 40 C 100 C Visual V.I. TAN Mobil Pyrogard 53 1.150 0 475 690 42 5.1 Blue 8 0.1 17

Mobil Product Book.qxd 6/25/04 4:09 PM Page 18 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Pyrogard D is a premium-quality water-in-oil emulsion fire-resistant hydraulic fluid that fills the need for an economical fire-resistant hydraulic fluid in general industry, coal mines, and rolling mills. Mobil Pyrogard D has factory Mutual (FM) approval. Mobil Pyrogard D can withstand moderate exposure to temperatures below freezing without harm, but it is not recommended for continual low-temperature service. The water content of Mobil Pyrogard D must be 38 percent or more to maintain fire-resistant properties. Spec. Pour Flash cst at cst at Color Product Grav. F F 40 C 100 C Visual Mobil Pyrogard D 0.925-22 115 White Water content, wt. % 44 Mobil Rarus 427 oil was developed to handle the higher speeds and temperatures of modern single- and multistage reciprocating air compressors. It is formulated from a high-grade stock of narrow distillation range and contains specially selected additives to enhance lubricity, antiwear properties, and rust protection in cylinder and crankcase lubrication. This lubricant is particularly recommended for units with a history of excess oil degradation deposits. Mobil Rarus 427 can help minimize valve carbon and crankcase sludge deposits, which should allow service and drain intervals to be extended. It can also be used as a dual-purpose crankcase and cylinder lubricant. It is recommended for compressors with discharge temperatures up to 300 F. Mobil Rarus 427 can also be used in rotary screw compressors where an ISO VG 100 compressor oil is recommended. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil Rarus 427 0.883-12 264 105 11.6 104 100 Mobil Rarus 800 Series are synthetic diester air compressor lubricants. Mobil Rarus 824 and 826 were developed for rotary screw compressors. These oils provide extended oil, filter, and separator life well beyond conventional compressor lubricants because of their extraordinary resistance to oxidation. The higher-viscosity-grades Mobil Rarus 827 and 829 are recommended for reciprocating compressors with high discharge temperatures. They help minimize deposit formation, thereby extending ring, cylinder, and valve life. Large multistage units operating under severe conditions may require special engineering considerations. These products have a broad application temperature range from -20 F ambient start-up to +400 F discharge air. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil Rarus 824 0.906-54 244 30 5.5 127 32 Mobil Rarus 826 0.941-43 246 66 7.5 63 68 Mobil Rarus 827 0.957-36 270 107 10.1 66 100 Mobil Rarus 829 0.969-40 270 158 13.2 70 150 18

Mobil Product Book.qxd 6/25/04 4:09 PM Page 19 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Rarus SHC 1020 Series are rotary air compressor lubricants that combine synthesized hydrocarbon fluids with highly effective additives which provide exceptional thermal and oxidation stability over a wide range of temperatures, and improved water tolerance and protection against corrosion. Recommended for all rotary screw and vane air compressors. They are particularly effective in screw-type compressors having oil injection cooling with high final compression temperatures, or in compressors that tend to form varnish and system deposits. They are an excellent choice when extended drain intervals are desired. Mobil Rarus SHC 1024 meets DIN 51506 VDL 32 standards; Mobil Rarus SHC 1026 meets DIN 51506 VDL 68 standards. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil Rarus SHC 1024 0.846-39 245 32 5.7 127 32 Mobil Rarus SHC 1025 0.849-39 245 44 7.2 131 46 Mobil Rarus SHC 1026 0.858-39 246 67 10.1 136 68 Mobil SHC 500 Series are synthetic, super-stabilized, antiwear hydraulic fluids that are recommended for systems using gear, piston or vane pumps operating at either high or low pressures or temperatures. Their naturally high VI and waxfree synthesized hydrocarbon base fluid provide the widest operating temperature range of any industrial hydraulic fluid. Available in three viscosity grades, Mobil SHC 524, 525 and 526 are particularly recommended for use in severe service and sealed-for-life systems where exceptional fluid performance is desired. They are approved in the Denison HF-0, Vickers V-104C and 35VQ25, and Sundstrand pump tests. Their 11-stage rating in the FZG Gear Test demonstrates a high level of protection against wear and scuffing. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil SHC 524 0.850-55 453 32 6.4 144 32 Mobil SHC 525 0.850-55 460 46 8.5 154 46 Mobil SHC 526 0.852-55 420 68 11.5 158 68 Mobil SHC 600 Series are synthetic gear and bearing lubricants. They are designed for use under severe conditions such as extremely high or low temperatures. Mobil SHC 600 Series combine synthesized hydrocarbon fluids with additives that enhance their oxidation stability, corrosion protection, and protection against wear. They are recommended for use in industrial enclosed gear sets and in heavily loaded plain or rolling element bearings. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil SHC 624 0.849-54 240 32 6.3 148 32 Mobil SHC 625 0.853-48 252 48 7.9 135 46 Mobil SHC 626 0.858-48 236 20 10.9 146 68 Mobil SHC 627 0.861-42 248 99 13.9 143 100 Mobil SHC 629 0.866-45 228 143 18.3 144 150 Mobil SHC 630 0.866-39 235 216 25.2 152 220 Mobil SHC 632 0.867-39 450 326 38.6 169 320 Mobil SHC 634 0.867-42 462 430 48.5 173 460 Mobil SHC 636 0.867-42 436 664 62.8 165 680 Mobil SHC 639 0.869-15 470 933 79.5 164 1,000 19

Mobil Product Book.qxd 6/25/04 4:09 PM Page 20 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil SHC 800 Series gas turbine lubricants are made from synthesized hydrocarbon base oils and a combination of additives to provide superior rust protection, low-temperature fluidity, and high-temperature oxidation stability. They are recommended as circulating oils for the lubrication of land-based gas turbines, particularly units under 3000 hp used as standby power units, and in some types of total energy systems. Mobil SHC 824 is approved by Solar Turbines. Mobil SHC 825 is approved for Cooper-Bessemer gas turbines. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil SHC 824 0.833 <-54 248 32 5.9 135 32 Mobil SHC 825 0.833-45 248 44 7.9 145 46 Mobil SHC PM Series are synthetic paper machine oils for calender press and other circulating systems. Available in three viscosity grades (220, 320, and 460), they are formulated to provide superior lubrication and keep-clean performance under operating temperatures beyond the capability of conventional paper machine oils. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil SHC PM 220 0.864-36 220 225 25.6 133 220 Mobil SHC PM 320 0.866-33 220 325 34.7 135 320 Mobil SHC PM 460 0.868-27 220 465 44.8 137 460 Mobil Synthetic Oven Lube 1090 is suitable for the lubrication of hot conveyor chains in drying ovens and tenter frames, at chain temperatures up to 260 C (500 F). Such equipment is used in the manufacture of fiber glass insulation, particleboard, plastic film, and textiles. Mobil Synthetic Oven Lube 1090 can be fed to the chain automatically or by hand. Compared to mineral oil and conventional chain lubricants, Mobil Synthetic Oven Lube 1090 reduces carbon buildup and extends cleaning intervals. It does not contain silicone. Spec. Flash cst at cst at Product Grav C 40 C 100 C V.I. Mobil Synthetic Oven Lube 1090 0.913 240 210 22 126 Mobil Synturion 6 is a synthetic barrier fluid specially formulated to meet the demanding lubrication and cooling requirements of mechanical seals to maximize seal life. Mobil Synturion 6 has excellent thermal and oxidative stability, low viscosity to aid in reducing internal friction and efficient heat transfer properties. Mobil Synturion 6 meets USDA requirements for incidental food contact.. Pour Flash cst at cst at Product Number Grav. C C 40 C 100 C V.I. Mobil Synturion 6 0.799-63 168 5.2 1.89 135 20

Mobil Product Book.qxd 6/25/04 4:09 PM Page 21 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Vactra Oil Named Series oils are high-quality, general-purpose oils used for the lubrication of intermittently oiled bearings. This requires an oil that will adhere strongly to metallic surfaces and maintain effective lubrication even though only an extremely thin film of oil is present. These oils also are used in low pressure hydraulic and circulation systems. In addition to film-strength additives, these oils contain an effective rust inhibitor. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil Vactra Oil Light 0.870-27 212 32 5.0 97 32 Mobil Vactra Oil Medium 0.876-24 242 46 6.7 97 46 Mobil Vactra Oil Heavy Medium 0.881-15 266 68 8.7 98 68 Mobil Vactra Oil Heavy 0.887-15 246 100 11.2 98 100 Mobil Vactra Oil Extra Heavy 0.890-9 280 150 14.6 96 150 Mobil Vactra Oil BB 0.893-6 288 220 18.8 95 220 Mobil Vactra Oil AA 0.891-9 286 320 23.9 95 320 Mobil Vactra Oil HH 0.900 (21 F) (564 F) 460 30.1 95 460 Mobil Vactra Oil Numbered Series are lubricants for machine tool ways and slides. They provide good stick-slip friction characteristics, adhesiveness, foam resistance, rust protection, metal wetting, and superior lubricity. Special chemistry provides superior coolant separability and excellent protection against corrosion in the presence of aqueous-coolants. The adhesive, friction modifier, and lubricity additives help eliminate stick-slip and chatter under thin-film, boundary lubrication conditions. This allows smooth, uniform motion, even at low table speeds. The four lubricants in the series are recommended for all combinations of cast iron, steel, and non-metallic way materials. Mobil Vactra Oil No. 1 is a dualpurpose hydraulic and way oil; Mobil Vactra Oil No. 2 is suitable for ways on small-to medium-size machine tools and for flood application in large machines; dual-purpose gear and way lubrication systems usually require Mobil Vactra Oil No. 3 and No. 4, with the latter recommended for large machines where way pressures are high or extreme precision is required. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil Vactra Oil No. 1 0.870-21 406 32 5.3 96 32 Mobil Vactra Oil No. 2 0.880-27 424 68 8.6 96 68 Mobil Vactra Oil No. 3 0.890 16 446 150 15.0 96 150 Mobil Vactra Oil No. 4 0.890 21 468 215 18.6 96 220 Mobil Vacuoline 100 Series oils are a family of high-quality, high-viscosity-index mineral oils designed to exceed Morgan Construction Company s Morgoil Bearings Specification. In addition to their natural oxidation stability, they have excellent demulsibility and rust-resistant properties. These oils readily separate from solid contaminants for easy cleaning by settling, filtration, and centrifuging. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil Vacuoline 133 0.892 16 550 220 18.8 95 220 Mobil Vacuoline 137 0.898 16 547 320 23.9 95 320 Mobil Vacuoline 146 0.902 20 565 460 30.0 95 460 Mobil Vacuoline 148 0.908 20 604 680 36.7 95 680 21

Mobil Product Book.qxd 6/25/04 4:09 PM Page 22 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Vacuoline 500 Series roll bearing oils are designed specifically for the lubrication of Morgan No-Twist Rod Mills. The Mobil Vacuoline 500 Series are also suitable for other primary mill and mini-mill bearing application systems. In addition to the qualities of the Mobil Vacuoline 100 Series, they have exceptional antirust demulsibility and antiscuff properties. They have high-level builder support from Morgan Construction Company. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil Vacuoline 525 0.887-6 507 89 10.7 95 Mobil Vacuoline 528 0.887-6 521 150 14.6 95 150 Mobil Vacuoline 533 0.898 0 543 220 19.2 95 220 Mobil Vacuoline 537 0.898 10 550 325 24.0 95 320 Mobil Vacuoline 546 0.898 5 546 460 30.0 95 460 Mobil Vacuoline Oil 1400 Series oils are used where machine tool ways are lubricated by bleeding oil from the hydraulic system. They possess the lubricity necessary to help eliminate chatter and stick-slip of tables under moderate load conditions, while having sufficient chemical stability for service as a hydraulic fluid in noncritical systems. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil Vacuoline Oil 1405 0.880 10 410 32 5.3 96 32 Mobil Vacuoline Oil 1409 0.890 10 424 68 8.6 96 68 Mobil Vacuoline Oil 1419 0.900 10 419 222 19.0 96 220 Mobil Vacuum Pump Oil is a high-quality, straight mineral oil with a narrow boiling range and a low vapor pressure. It is recommended for use in most vacuum pumps where high vacuums, not possible to obtain with regular oils, are required. Because this is a dehydrated oil, containers should be kept well sealed to prevent contamination by moisture from any source. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil Vacuum Pump Oil* 0.881-12 232 66 8.3 92 68 *Max Pressure (Welch Pump) 0.08 Microns of Mercury Mobil Vaprotec Light is a three-phase rust-inhibiting circulation oil. It contains a thin-film rust inhibitor, a liquid-phase rust inhibitor, and a vapor-phase inhibitor in addition to an antioxidant and a defoamant. It can be used for short term applications where a turbine-quality oil in the ISO 32 viscosity range is recommended during test, run-in and storage. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobil Vaprotec Light 0.875-7 193 30 5.3 95 32 22

Mobil Product Book.qxd 6/25/04 4:09 PM Page 23 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobil Velocite Oil Series are light-bodied, light-colored oils designed for the lubrication of very-high-speed spindles in machine tools and textile machinery. They are specially compounded to give excellent resistance to wear, deposit formation, and rust formation. Spec. Pour Flash cst at cst at ISO Product Grav. F F 40 C 100 C V.I. VG Mobil Velocite Oil No. 3 0.810-27 183 2 2 Mobil Velocite Oil No. 4 0.822 5 216 4.8 1.5 5 Mobil Velocite Oil No. 6 0.844 32 356 10 2.6 95 10 Mobil Velocite Oil No. 8 0.858 27 381 15 3.0 85 15 Mobil Velocite Oil No. 10 0.865 27 413 20 4.0 95 22 Mobilarma 200 Series rust preventives are light-bodied petroleum solvents with polar rust preventive, water displacement and fingerprint neutralizing additives. Mobilarma 245 is suited for the protection of finely finished parts between machining operations, including operations where water-soluble cutting or grinding fluids have been used. It is also suitable for use just before parts are packaged for storage or shipment, or to dry parts as a temporary protection until a heavier duty rust preventive can be applied. Mobilarma 247 is the heavier and will give the longest rust protection of any of the Mobilarma 200 Series solvent-based products. Spec. Flash SUS at Color Product Grav. F 100 F Visual Mobilarma 245 0.810 100 35 Mobilarma 247 0.846 160 38 Brown Mobilarma 500 Series rust preventive/lubricants combine excellent lubricating value with effective rust preventive properties. They meet the rust protection requirements for internal surfaces of all types of equipment including engines, compressors, circulation and hydraulic systems and splash-lubricated parts. They are particularly effective in protecting machines while in transit or in temporary storage. Spec. Pour Flash cst at cst at Product Grav. F F 40 C 100 C V.I. Mobilarma 522 0.876-10 360 27.0 4.8 95 Mobilarma 524 0.884 0 425 88.0 10.2 95 Mobilarma 777 and 778 rust preventives were developed for cold-rolled sheet and coiled steel and will protect against rust under extreme atmospheric conditions. They are nonsticky, oil base products that will not cause stains due to oxidation deposits. Spec. Pour Flash SUS at cst at Product Grav. F F 100 F 40 C Mobilarma 777 0.868 21 273 75 13.4 Mobilarma 778 0.873 27 298 100 18.8 23

Mobil Product Book.qxd 6/25/04 4:09 PM Page 24 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilarma 798 is a film-forming rust preventive formulated to provide excellent protection against rust and corrosion on wire rope. Mobilarma 798 has an NLGI Grade 1 consistency and protects against the corrosive effects of both salt water and fresh water over a wide temperature range. It resists throw-off in high speed service and adheres without being tacky or stringy. NLGI Drop Point SUS at cst at Color Product Grade F, min 210 F 100 C Visual Mobilarma 798 1 145 120 23.0 Amber; Semi-solid Mobilfluid 350 is a premium-quality power transmission fluid designed for machine tool and industrial hydrostatic drives and other industrial equipment drives using wet clutches. It has an extremely high viscosity index (VI), low pour point, and excellent low-temperature viscosity characteristics. It resists the loss of viscosity and VI under severe mechanical shear and is highly resistant to foaming and air entrainment. Antiwear additives in Mobilfluid 350 are nonreactive and do not affect the sintered bronze or other materials used as the facings of wet clutches in machine tool drives. Spec. Pour Flash cst at cst at Product Grav. F F 40 C 100 C V.I. Mobilfluid 350 0.887-39 370 39.9 7.6 154 Mobilfluid 424 and Mobilfluid LT are high-performance, multipurpose tractor transmission and hydraulic fluids. They use advanced technology for optimum performance in farm, contractor, and industrial tractors. Mobilfluid 424 is approved against John Deere J20C, and recommended for agricultural applications requiring Allison C-4 and Caterpillar TO-2 fluids. Mobilfluid LT is approved against John Deere J20D and meets Caterpillar TO-2 requirements. They are approved against Ford New Holland M2C134D, Massey Ferguson M1135 and M1141, White New Idea, Kubota, Denison HF-0, HF-1 and HF-2 (424), and Sauer Sundstrand specifications. They are also recommended for use in Case International, Deutz-Allis, Komatsu, Vickers, and Cincinnati Milacron equipment. Mobilfluid 424 and Mobilfluid LT are recommended for top-up and refill of transmissions, final drives, hydraulics, power steering, wet brakes, PTOs, and hydrostatic drives. Mobilfluid LT is designed for use in equipment needing cold weather start up and operation qualities. Mobilfluid 424 and Mobilfluid LT are not to be used in passenger car automatic transmissions. Grav. Pour Flash cp at cp at cst at cst at Product API F F -40 C -35 C 40 C 100 C V.I. Mobilfluid 424 29.0-42 442 55,000 55 9.3 152 Mobilfluid LT 30.0-54 381 18,000 34 7.2 180 Mobilgard 1 SHC is an SAE 40 (also meets SAE 20W-40 grade), high-performance, 15 TBN, fully synthetic lubricant for medium- and high-speed marine and industrial diesel engines. This oil provides excellent low-temperature fluidity, increased thermal and oxidative stability, and low volatility. Waste oil disposal costs can be minimized because this oil contains no zinc and the low chlorine level is well below the most stringent regulations in effect today. Mobilgard 1 SHC meets API CD, CF and CF-2 standards. Spec. Pour Flash cst at cst at % Sulf. Product Grav. C C 40 C 100 C V.I. SAE TBN Ash Mobilgard 1 SHC 0.872-54 250 109 14.5 136 40 15 1.60 24

Mobil Product Book.qxd 6/25/04 4:09 PM Page 25 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilgard M50 is a 50 TBN SAE 40 engine oil designed for use in all marine medium-speed diesel applications using residual fuel, especially the most severe low lube consumption engines used in marine propulsion, power generation and land based power generation applications. It provides excellent TBN retention, high temperature oxidation and thermal stability, low volatility, load carrying properties, and corrosion protection. This product is specifically designed to maintain a high level of engine cleanliness even at very high levels of residual fuel contamination in the lube oil. Mobilgard M50 is especially recommended for use in the latest medium speed engines designed with flame ring cylinder liners operating on high sulfur fuels. Spec. Pour Flash cst at cst at % Sulf. Product Grav. C C 40 C 100 C SAE TBN Ash Mobilgard M50 0.922-6 228 142 14.0 40 50 6.5 Mobilgard 300 lubricant was developed specifically to satisfy the system oil requirements of current designs of highoutput crosshead engines. It provides exceptional resistance to the formation of piston cooling space deposits while at the same time supplying additional load-carrying ability, detergency for cleanliness, and alkalinity to neutralize corrosive acids. Oil life is maximized by the exceptionally high stability and excellent water separating ability of this product. Spec. Pour Flash cst at cst at % Sulf. Product Grav. C C 40 C 100 C V.I. SAE TBN Ash Mobilgard 300 0.889-12 226 111 12 97 30 5.0 0.73 Mobilgard 312, 412 and 512 moderately alkaline diesel oils were developed for industrial, marine, and railroad trunk piston diesel engines using normal or economy fuels of less than 1.5 percent sulfur. The solvent-treated base stocks have been enhanced by alkaline detergent-dispersant additives and effective oxidation inhibitors. Their acid neutralizing ability is indicated by their TBN of over 10. In the recommended range of service, these oils effectively combat piston and port deposits and help minimize piston ring and liner wear. Mobilgard 312, 412, and 512 meets the API CF test specifications. Spec. Pour Flash cst at cst at % Sulf. Product Grav. C C 40 C 100 C V.I. SAE TBN Ash Mobilgard 312 0.896-9 226 108 12.0 100 30 15 2.1 Mobilgard 412 0.899-9 272 142 14.5 100 40 15 2.1 Mobilgard 512 0.894-9 282 219 19.4 100 50 15 2.1 Mobilgard M30 and M40 Series are premium 30 TBN and 40 TBN engine oils designed for use in the most severe residual-fueled medium-speed diesel applications. These diesel engine oils have been specially formulated to provide outstanding residual fuel compatibility characteristics for excellent engine cleanliness, especially in crankcase, camshaft areas, ring belt, and piston under-crown. They provide excellent high temperature oxidation and thermal stability, low volatility, high load carrying properties, and corrosion protection. Spec. Pour Flash cst at cst at % Sulf. Product Grav. C C 40 C 100 C SAE TBN Ash Mobilgard M330 0.907-6 244 112 12.0 30 30 3.8 Mobilgard M430 0.907-6 250 143 14.0 40 30 3.8 Mobilgard M340 0.915-6 240 113 12.0 30 40 5.0 Mobilgard M440 0.915-6 242 143 14.0 40 40 5.0 25

Mobil Product Book.qxd 6/25/04 4:09 PM Page 26 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilgard 450 NC zinc-free, chlorine-free marine diesel engine oil is formulated to lubricate high-output, turbocharged, medium-speed trunk diesels under severe conditions. This includes high idle conditions and fuel sulfur contents less than 1.5 percent. This oil provides easier waste oil disposal and good environmental awareness due to its zinc and chlorine free formulation. Mobilgard 450 NC is an LMOA Generation 4 diesel engine oil which exceeds API CD and CF-2 qualification performance and has EMD s approval. Spec. Pour Flash cst at cst at % Sulf. Product Grav. C C 40 C 100 C V.I. SAE TBN Ash Mobilgard 450 NC 0.897-6 260 139 14.1 98 40 13 1.60 Mobilgard 570 has been developed for marine crosshead engines with increased power and fuel efficiency. It employs new additives with substantially greater thermal stability and an optimum viscosity of 21 cst at 100 C for best lubricant distribution and film retention. Through new refining technology, this higher viscosity is attained with little or no bright stock. Unique technology at the 70 TBN alkalinity level in new generation Mobilgard 570 has demonstrated superior ring and liner protection and cleanliness under sustained operation with fuel sulfur levels from less than 0.5% up to 5.0%. Mobilgard 570 has a wide fuel sulfur level capability and provides an extended period between piston overhauls. Spec. Pour Flash cst at cst at Product Grav. C C 40 C 100 C V.I. SAE TBN Mobilgard 570 0.937-9 256 229 21 104 50 70 Mobilgard ADL Series is a family of increased-dispersancy engine oils for high BMEP medium- and high-speed diesel engines operating on distillate and MDO fuels. These advanced diesel lubricants are available in both SAE 30 and 40 grades to suit most marine engine viscosity requirements. A special balance of detergent and dispersant properties increases the oils resistance to the formation of lacquer in severe service and assists in removing sludge and deposits. Using Mobilgard ADL Series oils helps avoid high oil consumption associated with cylinder liner lacquering, improve overall engine cleanliness, and significantly reduce the number of engine overhauls. Superior load-carrying properties minimize piston ring and liner wear and make Mobilgard ADL Series lubricants suitable for marine gear applications. Spec. Pour Flash cst at cst at % Sulf. Product Grav. C C 40 C 100 C V.I. SAE TBN Ash Mobilgard ADL 30 0.900-12 246 108 11.6 100 30 15 2.3 Mobilgard ADL 40 0.901-9 244 142 14.5 101 40 15 2.3 26

Mobil Product Book.qxd 6/25/04 4:09 PM Page 27 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilgear 600 Series oils are premium-quality, heavy-duty industrial gear oils for the lubrication of enclosed gear sets operating under heavy or shock loads. They are formulated to provide rust and corrosion protection, enhanced oxidation stability and resistance to foaming. The sulfur-phosphorus extreme-pressure additives provide antiwear and frictionreducing characteristics and help minimize the temperature rise in heavily loaded gear sets. They satisfy the current American Gear Manufacturers Association (AGMA) specifications and performance requirements. Spec. Pour Flash cst at cst at AGMA ISO Product Grav. C C 40 C 100 C V.I. No. VG Mobilgear 626 0.887-27 225 68 9.2 98 2 EP 68 Mobilgear 627 0.892-27 235 100 12.0 98 3 EP 100 Mobilgear 629 0.892-27 245 150 15.8 98 4 EP 150 Mobilgear 630 0.895-24 255 220 19.5 98 5 EP 220 Mobilgear 632 0.897-18 265 320 24.5 97 6 EP 320 Mobilgear 634 0.910-12 275 460 29.9 96 7 EP 460 Mobilgear 636 0.919-9 285 680 39.2 90 680 Mobilgear SHC 150, 220, 320, 460, and 680 oils are synthetic, heavy-duty industrial gear oils for the lubrication of enclosed gear sets operating under severe temperature ranges and load. Depending on viscosity, five grades of Mobilgear SHC 150, 220, 320, 460, and 680 lubricants are recommended for all steel-on-steel enclosed gear drives in the temperature range between -34 C (-30 F) minimum ambient temperature and 121 C (250 F) maximum operating temperature. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobilgear SHC 150 0.868-45 222 150 19.5 150 150 Mobilgear SHC 220 0.874-36 232 220 26.0 150 220 Mobilgear SHC 320 0.876-33 238 320 35.0 155 320 Mobilgear SHC 460 0.868-27 245 460 46.0 155 460 Mobilgear SHC 680 0.890-27 256 680 62.0 160 680 Mobilgear SHC 1000, 1500, 3200, and 6800 oils are synthetic extra-heavy-duty industrial gear oils for the lubrication of all kinds of enclosed gearing as well as plain and rolling element bearings. Generally, these oils are ideal for heavily loaded, low-speed gears and bearings where boundary lubrication conditions may prevail. Mobilgear SHC 1000, 1500, 3200, and 6800 extra-heavy-duty lubricants also can be used for certain open gear applications, but special engineering consideration may be required to select the most effective method of application. Mobilgear SHC 6800 is exclusively endorsed by EMD for use in DC traction motor drives and General Electric has given it exclusive approval against GE spec D50E25B. Mobilgear SHC 3200 is approved against GE spec D50E25C. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobilgear SHC 1000 0.871-24 240 1,000 81 160 1,000 Mobilgear SHC 1500 0.883-18 240 1,500 106 160 1,500 Mobilgear SHC 3200 0.888-9 240 3,023 171 160 3,200 Mobilgear SHC 6800 0.897-6 240 8,100 350 170 6,800 Mobilgear SHC 22M and 46M oils are extra-heavy-duty synthetic gear oils for the lubrication of heavily loaded, lowspeed gears where boundary lubrication conditions prevail and for open gear applications where asphaltic, diluentcontaining lubricants have historically been used. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobilgear SHC 22M 0.890 6 240 22,000 700 180 22,000 Mobilgear SHC 46M 0.924 15 240 46,000 1,375 180 46,000 27

Mobil Product Book.qxd 6/25/04 4:09 PM Page 28 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilgear SHC XMP 320 is synthetic gear oil that combines a synthetic hydrocarbon fluid with an advanced and balanced additive package designed to provide protection against scuffing and an improved level of protection against micro pitting fatigue even under extreme conditions. It also provides outstanding rust and corrosion protection versus conventional gear oils and excellent compatibility with non-ferrous metals at elevated temperatures. Spec. Pour Flash cst at cst at ISO Product Grav. C C 40 C 100 C V.I. VG Mobilgear SHC XMP 320 0.860-38 242 335 38.3 164 320 Mobilgrease 28 is a clay-thickened, synthetic hydrocarbon-base-fluid grease designed primarily for aviation applications. However, it has certain properties and performance characteristics that make it a desirable lubricant for special industrial applications as well. Mobilgrease 28 is designed for plain and rolling bearings, splines, screws, worm gears and other mechanisms. It meets the requirements of U.S. Military Specification MIL-G-81322E Grease, General-Purpose, Aircraft and meets the requirements of U.S. Military Specification DOD-G-24508A (Navy) for shipboard auxiliary machinery. It is designated as U.S. military symbol WTR and NATO code G-395. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure F 40 C 100 C Visual Mobilgrease 28 1 1/2 Clay 295 Smooth/ 305 30 5.8 Dark Buttery Red Mobilgrease CM-L, CM-P, CM-S and CM-W are heavy-duty, unleaded contractor/mining greases. They have excellent water resistance and extreme pressure (EP) capabilities. These greases have excellent adherence to all surfaces, ensuring outstanding lubrication. Mobilgrease CM-L and CM-P greases have a high-temperature, lithium complex thickener system and contain molybdenum disulfide (3%). Mobilgrease CM-S and CM-W have a lithium complex thickener system. All of the greases contain oils at the optimum viscosity to perform tough lubricating jobs found in the contractor/mining industries. Mobilgrease CM-P and CM-S greases are recommended for highly loaded plain and antifriction bearings working in severe operating and weather conditions. Mobilgrease CM-P has an operating temperature range of -5 F to +350 F. They are especially suitable for hinge and bucket pins. Mobilgrease CM-L and CM-W are winter-grade products recommended for low-temperature applications that require improved pumpability. Mobilgrease CM-L has an operating temperature range of -20 F to +350 F. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color % Product Grade Thickener Worked Structure C ( F), min 40 C 100 C Visual Moly Mobilgrease CM-L 1 Lithium 325 Smooth/ 260 (500) 150 16 Gray 3 Complex Tacky Mobilgrease CM-P 2 Lithium 280 Smooth/ 260 (500) 320 22 Gray 3 Complex Tacky Mobilgrease CM-W 1 Lithium 325 Smooth/ 260 (500) 150 16 Orange Complex Tacky Mobilgrease CM-S 2 Lithium 280 Smooth/ 260 (500) 320 22 Orange Complex Tacky 28

Mobil Product Book.qxd 6/25/04 4:09 PM Page 29 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilgrease EAL 100 Series greases are formulated with synthetic vegetable base oil for environmentally sensitive applications. The proprietary biodegradable base fluid provides excellent lubrication while exceeding U.S. and international standards for biodegradability and aquatic toxicity. The two greases in the series, Mobilgrease EAL 101 and Mobilgrease EAL 102, are multipurpose products recommended for the lubrication of plain and rolling element bearings in normal through heavy-duty industrial applications. They are particularly recommended where loads are high or shock loads are present, or where severe vibration is a problem. The Mobilgrease EAL series greases perform simiarly to AGMA CG-1 greases, and will provide suitable lubrication for most AGMA-Type CG-1 flexible couplings. The greases are acceptable for use at operating temperatures between -30 C (-22 F) and 120 C (248 F), consistent with standard relubrication intervals. They have good water resistance characteristics, antirust and corrosion prevention properties. Penetration Base Oil NLGI at 77 F Drop Point cst at Color Product Grade Thickener Worked Structure C ( F) 40 C Visual Mobilgrease EAL 101 1 Li 12-OH 325 Smooth 180 (356) 100 Brown Mobilgrease EAL 102 2 Li 12-OH 280 Smooth 180 (356) 100 Brown Mobilgrease FM Series are translucent, tan aluminum-complex-thickened food machine greases. They are formulated to replace many conventional lithium and synthetic greases in moderate- and high-temperature applications in food plants and sanitary equipment. They meet USDA H-1 standards and Title 21 CFR 178.3570 requirements for incidental contact with food, and are registered with NSF.* The two grades are suitable for regular duty up to 250 F, will withstand routine water immersion, and offer good low-temperature pumpability, superior antiwear protection, and good protection against corrosion. Penetration NLGI at 77 F Drop Point Mineral Base Oil Color Product Grade Thickener Worked Structure C ( F), min ISO VG Visual Mobilgrease FM 101 1 Al Complex 325 Smooth/Tacky 216 (420) 100 Clear Amber Mobilgrease FM 102 2 Al Complex 280 Smooth/Tacky 216 (420) 100 Clear Amber *Listed with NSF. Mobilgrease HT Series are unleaded, lithium complex thickened high temperature steel mill greases. They contain highviscosity base oils and additives to provide the outstanding water spray-off, wet churn, and wet roll performance and excellent extreme pressure antiwear properties required in steel mill service. They shed mill water, continue to lubricate, and aid in forming a strong seal to resist water intrusion. When free water does enter a bearing, the greases maintain consistency. These greases have outstanding high-temperature performance properties. They can also be used in central grease systems at moderate temperatures. Mobilgrease HTF provides fire retardancy for castor and hot strip mill operations. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Mobilgrease HTR 1/2 Lithium Complex 340 Tacky 260 (500) 320 16 Black Mobilgrease HTM 1 1/2 Lithium Complex 295 Tacky 260 (500) 460 18 Black Mobilgrease HTS 2 Lithium Complex 280 Tacky 260 (500) 680 25 Black Mobilgrease HTF 2 Lithium Complex 280 Tacky 190 (375) 680 25 Black 29

Mobil Product Book.qxd 6/25/04 4:09 PM Page 30 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilgrease Moly 50, 51, 52 and Moly 50 Arctic are 5% moly greases intended for the lubrication of off-highway equipment. They are unleaded, lithium complex soap greases with superior extreme pressure and antiwear properties. These greases have excellent staying power under extreme operating conditions and have especially good water wash out and spray off capabilities. Mobilgrease Moly 50 is recommended for use in central lubrication systems found on Caterpillar and other manufacturers off-highway equipment. Mobilgrease Moly 50 Arctic is recommended for use in offhighway equipment operating in temperatures down to -30 C. The excellent low temperature mobility of this product makes it well suited for central dispensing systems. Mobilgrease Moly 51 is recommended for chassis lubrication wherever better low temperature pumpability is required. Mobilgrease Moly 52 is recommended for all general purpose chassis lubrication including plain bearings. Mobilgrease Moly greases are not recommended for the lubrication of high speed U-joints. Base Oil Penetration NLGI at 77 F Drop Point cst at Color % Product Grade Thickener Worked Structure C ( F), min 40 C Visual Moly Mobilgrease Moly 50 0 Lithium 370 Smooth/ 240 (464) 320 Gray 5.0 Complex Tacky Mobilgrease Moly 51 1 Lithium 325 Smooth/ 250 (482) 320 Gray 5.0 Complex Tacky Mobilgrease Moly 52 2 Lithium 280 Smooth/ 250 (482) 320 Gray 5.0 Complex Tacky Mobilgrease Moly 50 Arctic 0 Lithium 370 Smooth/ 230 (446) 100 Gray 5.0 Complex Tacky Mobilgrease XHP 222 and XHP 222 Special are a premium lithium complex, extreme pressure multiservice greases used in a wide range of applications. They are formulated to provide excellent high temperature performance with excellent adhesion, structural stability and resistance to water wash out. The greases offer excellent protection against rust, corrosion and wear especially on axles, rings and bearings. Mobilgrease XHP 222 does not contain lead, chlorine or nitrite. Mobilgrease XHP 222 Special contains 0.75% molybdenum disulfide and is intended for those lube points with sliding and pivoting movements. Base Oil NLGI Drop Point cst at Color % Product Grade Thickener Structure C ( F), min 40 C Visual Moly Mobilgrease XHP 222 2 Lithium Smooth/ >260 (500) 220 Blue complex adhesive Mobilgrease XHP 222 Special 2 Lithium Smooth/ >260 (500) 220 Gray.75 complex adhesive Mobilgrease XTC is an extreme-pressure, unleaded, high temperature, lithium soap/polymer thickened flexible coupling grease. It is made with very viscous oil to provide low bleed properties critical to modern AGMA type CG-2 high speed couplings. Mobilgrease XTC is recommended for temperatures from -30 C to 120 C. Penetration Base Oil NLGI at 77 F Drop Point cst at Color AGMA Product Grade Thickener Worked Structure C ( F) 40 C Visual CG1/CG2 Mobilgrease XTC 1 Lithium Complex/ 325 Tacky 215 (419) 680 Dark Meets Polymer Brown 30

Mobil Product Book.qxd 6/25/04 4:09 PM Page 31 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilith AW Series are lithium-complex thickened multiservice greases. They are formulated with antiwear agents to provide excellent service under severe operating conditions and in the presence of water. Mobilith AW 1, 2, and 3 greases are recommended for the lubrication of bearings operating with heavy or shock loads, and at temperatures up to 130 C (266 F). They are suitable for lubricating cams, ways, and other sliding elements. Other applications include vehicles and grease components in paper mills, where both water and high temperatures are encountered. Mobilith AW 0 and 00 are softer, high-temperature greases recommended for grease application systems, gear lubrication, and where extreme-cold-temperature pumpability is important. Penetration Base Oil at 77 F Drop Point cst at Color Product Grade Thickener Worked Structure C ( F), min 40 C Visual Mobilith AW 00 00 Lithium Complex 415 Smooth/Tacky 110 Green Mobilith AW 0 0 Lithium Complex 370 Smooth/Tacky 150 Green Mobilith AW 1 1 Lithium Complex 325 Smooth/Tacky 260 (500) 150 Green Mobilith AW 2 2 Lithium Complex 280 Smooth/Tacky 260 (500) 150 Green Mobilith AW 3 3 Lithium Complex 235 Smooth/Tacky 260 (500) 150 Green Mobilith SHC 100 is a high-performance electric motor bearing grease which combines a synthetic base fluid with a lithium complex thickener. The synthetic base oil allows for low-temperature pumpability and very low start/run torque values. Mobilith SHC 100 is not an extreme-pressure grease. Mobilith SHC 100, an NLGI Grade 2 grease, is formulated with an ISO 100 viscosity grade base oil. It satisfies the long service life and performance requirements of greaselubricated rolling element bearings for most electric-motor manufacturers. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Mobilith SHC 100 2 Lithium Complex 280 Smooth 260 (500) 100 14.5 Red Mobilith SHC 220, 221, 460, 007 and 1500 are high-performance, extreme-pressure, multiservice greases which combine a synthetic base fluid with a lithium complex thickener. Mobilith SHC 220, suited for long life performance, is recommended for automotive and industrial applications which need a lubricant that can perform well at extreme operational temperatures. Mobilith SHC 221 is similar to Mobilith SHC 220, but is an NLGI grade 1. Mobilith SHC 460, an NLGI Grade 1 1/2 grease, is recommended for industrial and automotive applications in both high and low temperatures. It will provide outstanding bearing protection under heavy loads at low to moderately high speeds, and where water is a factor. Mobilith SHC 460 has performed extremely well in steel mill and paper mill applications. It also has proven to be an exceptional severe-service automotive chassis grease. Mobilith SHC 007 is used for leaky gearboxes subjected to high temperatures and also for on-highway trailer wheel-end bearings. Mobilith SHC 1500 is an NLGI Grade 1 grease with an exceptionally high viscosity synthetic base oil. It is intended for plain and rolling element bearings operating at slow speeds, heavy loads and high temperatures. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Mobilith SHC 220 2 Lithium Complex 280 Smooth/Slight Tack260 (500) 220 23.8 Red Mobilith SHC 221 1 Lithium Complex 325 Smooth/Slight Tack260 (500) 220 23.8 Lt. Tan Mobilith SHC 460 1 1/2 Lithium Complex 305 Smooth/Slight Tack260 (500) 460 46.5 Red Mobilith SHC 007 00 Lithium Complex 415 Smooth/Tacky Semi-fluid 460 46.5 Red Mobilith SHC 1500 1 Lithium Complex 325 Smooth/Tacky 260 (500) 1,500 110 Red 31

Mobil Product Book.qxd 6/25/04 4:09 PM Page 32 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilith SHC PM and Mobilith SHC PM 220 are high performance paper machine greases which combine a synthetic base fluid with a lithium-complex/polymer thickener. The resistance to a change in consistency when contaminated with water and superior protection against rust and corrosion make ideal greases for the wet end of the paper machine. They are ideal greases for the highly loaded, low- to moderate-speed press section roll bearings because of the high viscosity of its base oil and the effective antiwear/extreme-pressure protection these provide. The low evaporation rate and excellent high-temperature oxidation stability of the synthetic base oil of Mobilith SHC PM and Mobilith SHC PM 220 help maximize application intervals and bearing life in high-temperature felt roll and calender stack bearings. These greases have a wide operating temperature range of -40 C to +177 C (-40 F to +350 F). Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Mobilith SHC PM 1 1/2 Lithium Complex/ 305 Smooth/Slight Tack 260 (500) 460 46.5 Light Tan Polymer Mobilith SHC PM 220 1 1/2 Lithium Complex/ 305 Smooth/Slight Tack 260 (500) 220 23.8 Light Tan Polymer Mobilmet Alpha, Sigma, Gamma and Omega are mineral oil-type active cutting oils that incorporate synthesized additive technology to control the build-up edge for improved surface finish and tool life. These oils are blended with a balanced selection of additives designed to provide a synergistic effect that helps maximize performance. These Mobilmet oils are recommended for use with metals varying from tough and draggy alloys to hard and brittle ones. They may stain most nonferrous metals. Mobilmet Sigma and Gamma contain an antimist agent. Spec. Pour Flash SUS at cst at Color Phos. Sulfur Sulfur Lubricity Cl Product Grav. F F 100 F 40 C ASTM % Total % Act.,% Fat % % Mobilmet Alpha 0.865 30 320 100 18 7.0 Nil 1.2 0.40 5.0 Nil Mobilmet Sigma 0.874 30 350 150 30 7.0 Nil 1.1 0.60 3.0 Nil Mobilmet Gamma 0.876 30 350 167 33 7.0 Nil 1.2 0.60 4.0 0.40 Mobilmet Omega 0.896 30 350 220 43 7.0 Nil 2.6 0.90 12.0 1.60 Mobilmet Aqua Rho is a bio-resistant emulsifiable metal working fluid. Mobilmet Aqua Rho, when mixed with water forms an effective metal working coolant for a wide range of ferrous and non-ferrous alloys. Mobilmet Aqua Rho s components are inherently bio-resistant and does not require the use of toxic biocides and/or fungicides. Mobilmet Aqua Rho does not contain biocides, chlorine, sulfur or phenols. Spec. Pour Flash cst at cst at Emulsion Product Grav. C ( F) C ( F) 100 C 40 C ph (6% corrosion) Mobilmet Aqua Rho 0.934-29 (-20) 114 (237) 13 131 8.5 The Mobilmet CCF Series metal removal fluids are clear, non-chlorinated mineral oil based active cutting oils. They contain an innovative and particularly effective additive combination to meet the highest demands of machining operations, cutting conditions and tool and workpiece metallurgy. The antimist agent reduces oil consumption and workplace mist. The fluids are clear allowing for better visibility of the workpiece. Spec. Pour Flash SUS at cst at Color Sulfur Sulfur Friction Cl Product Grav. F F 100 F 40 C ASTM Total % Act.,% Modifier % Antimist Mobilmet Delta CCF 0.863 5 350 66 12.0 2.0 2.5 2.0 2.0 Nil No Mobilmet Lambda CCF 0.887-22 378 97 19.9 2.0 2.5 2.0 2.0 Nil Yes Mobilmet Beta CCF 0.887-5 350 141 30.0 2.0 2.5 2.0 2.0 Nil Yes Mobilmet Theta CCF 0.887-5 350 159 34.0 2.0 2.5 2.0 2.0 Nil Yes Mobilmet Kappa CCF 0.887-5 350 195 42.0 2.0 2.5 2.0 2.0 Nil Yes 32

Mobil Product Book.qxd 6/25/04 4:09 PM Page 33 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilmet Upsilon, Omicron, Omicron HD and Nu are mineral-oil-type, nonstaining cutting oils. They contain a balanced selection of additives that maximize performance. They meet the antiweld and lubricity requirements of the most severe machining operations on the most difficult-to-machine metals such as copper and its alloys. The nonstaining nature of these oils permit their use where complementary oils are required for the splash, hydraulic or spindle lubrication systems of metalworking machines. Mobilmet Omicron, Omicron HD, and Nu contain an antimist agent. Spec. Pour Flash SUS at cst at Color Phos. Sulfur Sulfur Lubricity Cl Product Grav. F F 100 F 40 C ASTM % Total % Act.,% Fat % % Mobilmet Upsilon 0.850 25 325 60 10 4.5 Nil 0.35 Nil 2.0 Nil Mobilmet Omicron 0.850 30 365 135 26 5.0 Nil 0.50 Nil 2.0 Nil Mobilmet Omicron HD 0.866 30 365 160 31 5.5 Nil 0.5 Nil 2.0 Nil Mobilmet Nu 0.884 10 360 195 37 8.0 Nil 1.1 Nil 8.0 0.8 Mobilmet 100 Series are general purpose, water soluble cutting oils. They will not stain and are suitable for both ferrous and nonferrous metals. Mobilmet S-122 is used in areas of normal (300 ppm) water hardness, while Mobilmet S-126 offers good stability where water hardness exceeds 500 ppm. These oils are recommended for use in cutting and grinding operations, particularly where enhanced cooling is needed. Density Pour Flash cst at Color Emulsion Freeze Product Lbs/Gal C ( F) C ( F) 40 C ASTM Test Test Mobilmet S-122 7.83-18 (0) 177 (350) 49.0 8.0 Pass Pass Mobilmet S-126 7.40-23 (-10) 122 (250) 54.0 4.5 Pass Pass Mobilmet TC 30 is a mineral oil type cutting fluid specially formulated for thread cutting operations. Mobilmet TC 30 balanced additive package provides enough lubricity and extreme pressure protection for even difficult to machine alloys. Pour Flash cst at Sulfur Sulfur Cl Lubricity Product Density C ( F) C ( F) 40 C Active Total % % Fat % Mobilmet TC 30 7.3-3 (27) 160 (320) 28 1.0 2.7.3 12 Mobiltac 325 NC and 375 NC lubricants are unleaded, diluent-type, heavy bodied lubricants designed to lubricate open gears on contractor, mining and industrial equipment. They contain a nonchlorinated, volatile solvent that ensures fluidity during application, even at temperatures as low as -34 C (-30 F). Once applied, the diluent evaporates and the lubricants take on a flexible, adhesive, high-strength consistency which is maintained throughout their service life. These newgeneration lubricants are applied easily by hand or with automatic dispensers. Mobiltac 375 NC is also available as Gear Lube 375 NC Spray Can. This convenient package is for easy application in hard to reach areas. Spec. Flash cst at cst at Color Product Grav. C 40 C 100 C Visual Mobiltac 325 NC 0.960 110 1,600* 1,000 Black Mobiltac 375 NC 0.960 135 5,000* 1,260 Black Gear Lube 375 NC Spray Can 0.960 5,000* 1,100 *Contains Diluent 33

Mobil Product Book.qxd 6/25/04 4:09 PM Page 34 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobiltac LL, MM and QQ are nondiluent, high-viscosity open gear lubricants. They are formulated with toxicologically safe base stocks and additives. Mobiltac QQ meets the former AGMA 13 EP gear lubricants specification. Spec. Pour Flash cst at cst at Color Product Grav. C C 40 C 100 C Visual Mobiltac LL 0.916-9 182 1,209 58 Black Mobiltac MM 0.934 3 182 3,900 126 Black Mobiltac QQ 0.940 6 190 9,526 217 Black Mobiltemp 2 is a clay-thickened grease for sleeve and antifriction bearings operating at low speed and high temperatures. It utilizes a high quality, high viscosity mineral oil and is specially formulated to provide low volatility and excellent resistance to oxidation at high temperatures, resistance to water or steam contamination and good anti-wear performance. Mobiltemp 2 is particularly suited for high temperature applications, resisting changes in consistency under both high temperature and cyclic conditions of heating and cooling. The grease will not soften and leak under high temperature conditions or harden excessively on cooling. The recommened operating temperature range is -29 C to +177 C (-20 F to +350 F), with even higher temperatures for short periods, with appropriate relubrication intervals. It is recommeneded for use in oven conveyor chain bearings, kiln car wheel bearings, and glass manufacture conveer belt roller bearings. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Mobiltemp 2 22 Nonsoap 280 Smooth 300 (570) 460 31 Amber Mobiltemp 78 is a clay-thickened grease for sleeve and antifriction bearings subjected to high temperatures and heavy loads. This grease has an operating temperature range of -29 C to +177 C (-20 F to +350 F). Mobiltemp 78 contains molybdenum disulfide (1%) which imparts staying power in those situations where the grease itself has been depleted in use and where only the molybdenum disulfide remains to prevent wear until more grease is applied. This grease has shown outstanding ability to lubricate such components as conveyor bearings on high-temperature ceramic and paintbaking ovens and antifriction bearings on preconditioning drums of paper corrugators. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color % Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Moly Mobiltemp 78 1 Nonsoap 325 Smooth 260 (500) 460 31 Gray 1.0 Mobiltemp SHC 32 is a clay-thickened, synthetic, multiservice grease. The synthetic hydrocarbon base fluid provides extremely low cold-temperature breakaway and running torque values, and maintains consistency over a wide operating range. In addition, it provides long service life due to superior resistance to oxidation. Mobiltemp SHC 32 exhibits extreme-pressure characteristics. It is recommended for the lubrication of plain and rolling element bearings, splines, screws, and some enclosed gearing with temperature ranges from -54 C to 177 C (-65 F to 350 F). Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Mobiltemp SHC 32 1 1/2 Nonsoap 310 Smooth 232 (450) 32 5.2 Dark Red 34

Mobil Product Book.qxd 6/25/04 4:09 PM Page 35 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobiltherm 603 and 605 are mineral-type heat transfer oils intended for use in closed cold-oil-sealed systems. Mobiltherm 603 is a high-vi paraffinic oil that is safe to use up to 288 C (550 F) and where minimum shutdown temperatures are not below -4 C (25 F). With its high specific heat and thermal conductivity at all temperatures Mobiltherm 603 provides rapid heating and greater flexibility in a system. It is particularly applicable where high heattransfer rates or high flow rates at reasonably low temperatures are desired. Mobiltherm 605, using select petroleum components, is intended for use in heat transfer systems where bulk temperatures can approach and equal 315 C (600 F). Spec. Pour Flash cst at cst at Product Grav. C ( F) C ( F) 40 C 100 C Mobiltherm 603 0.860-4 (25) 171 (340) 20.4 4.0 Mobiltherm 605 0.872-12 (10) 198 (388) 30.0 5.0 Mobiltrans AST is an all-season, semi-synthetic, multigrade viscosity off-highway transmission fluid that is formulated to provide optimum low temperature performance in cold-climate conditions while maintaining superior lubrication and film thickness during high temperature operation. This high level of performance is achieved through the use of synthetic components and a balanced additive package. Mobiltrans AST provides outstanding oxidation resistance, shear stability, clutch-plate friction, elastomer compatibility, and antiwear protection in transmissions operating under both high and low temperature conditions. It meets the Caterpillar TO-4 and TO-4M specifications and can be recommended in applications requiring an Allison C-4 fluid. Mobiltrans AST is designed for use in off-highway transmissions. This product is recommended for use in Caterpillar, Case, Komatsu and other contractor, logging, mining, and farm equipment applications. Grav. Pour Flash cp at cp at cst at Product API F F -20 C 40 C 100 C V.I. Mobiltrans AST 29.2-38 432 9,400 107 14.2 134 Mobiltrans HD oils are latest-technology products designed to optimize performance of off-highway transmissions, drive trains, and hydraulic systems without the compromises inherent in the mixed-fleet engine oils previously used in these applications. The new lubricants contain a balanced additive package which provides outstanding oxidation stability, clutch-plate friction, elastomer compatibility, and antiwear protection in gearboxes. The three grades, SAE 10W, 30, and 50, are designed to optimize shear stability and provide excellent high-temperature/high-shear viscosity. Mobiltrans HD lubricants meet the Caterpillar TO-4 specification which cannot be fully satisfied by modern engine oils. They provide optimum balance between static and dynamic friction in six clutch materials used in powershift transmissions, drive-train clutches, steering clutches, and wet brakes. They also minimize chatter in oil-cooled disc brakes, and optimize durability for extended service. Mobiltrans HD lubricants also provide excellent antiwear performance in powershift transmissions, gearboxes, and final drives. They provide outstanding FZG gear wear control, Vickers 35VQ25 pump protection in hydraulic systems, Allison C-4 performance, and API GL-3 EP gear score control. They are recommended for Caterpillar, Case, Komatsu, and other contractor, logging, mining, and farm equipment. Grav. Pour Flash cst at cst at Product API F F 40 C 100 C TBN V.I. Mobiltrans HD 10W 27.9-27 396 42 6.3 7.9 96 Mobiltrans HD 30 27.0 0 435 100 11.2 7.9 97 Mobiltrans HD 50 24.7 5 464 195 18.0 7.9 101 35

Mobil Product Book.qxd 6/25/04 4:09 PM Page 36 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobiltrans SHC 50 is a heavy-duty SAE 50 synthetic transmission oil. It is recommended for year-round lubrication of automotive manual transmissions in light-duty to extremely heavy-duty on- and off-highway equipment. This includes subzero conditions in arctic climates and operations requiring lubricants with relatively high viscosity and good loadcarrying ability. Mobiltrans SHC 50 meets API Service GL-4, GL-3, MT-1. Mobiltrans SHC 50 meets and has been approved against the following equipment builders standards: Eaton Roadranger E500 (PS-164), Mack TO-A Plus, Meritor Extended Drain (O-81), and Volvo STD 97305. It is approved for use at 500,000-mile drain intervals by Eaton, Mack Trucks and Meritor providing 750,000-mile warranty protection. It is NOT suitable for hypoid gears or other applications where API GL-5 or MIL-PRF-2105E multipurpose lubricants are specified. Mobiltrans SHC 50 has the same viscosity as most SAE 50 engine oils and SAE 90 gear lubricants at the high end of the temperature-viscosity scale. However, because of its inherently higher viscosity index, it provides a better protective film at higher temperatures than conventional oils, without the addition of VI improvers. Hence, the product is shear-stable under all operating conditions and it offers an extremely low pour point. It remains fluid without channeling at subzero temperatures. Mobiltrans SHC 50 gives excellent FZG gear protection in stages 1 through 11. It also provides outstanding CRC L-60 gear oxidation and thermal breakdown deposit protection. (At the time of this printing Mobiltrans SHC 50 was well positioned to be approved against Eaton s new HD500K specification. Please refer to the current product data sheet.) Grav. Pour Flash cst at cst at Product API F F 40 C 100 C V.I. Mobiltrans SHC 50 30.0-54 464 140 17.6 138 Mobiltrans SHC Arctic is an all temperature, fully synthetic transmission oil designed especially for extreme cold climate applications. It provides outstanding clutch and brake compatibility along with high and low temperature performance only possible with synthetics. Mobiltrans SHC Arctic meets the Caterpillar TO-4 specification and is also recommended for applications requiring an Allison C-4 fluid. This product is very shear stable and contains no viscosity modifier. Mobiltrans SHC Arctic provides excellent clutch and transmission life, and can be recommended for use in Caterpillar, Case, Komatsu, and other off-highway equipment where Caterpillar TO-4 or Allison C-4 fluids are required. Grav. Pour Flash Brookfield cp at cst at cst at Product API F F -40 C 40 C 100 C V.I. Mobiltrans SHC Arctic 33.9-60 401 42,000 81.3 12.2 146 Mobilube HD 80W-140 is an extreme-pressure gear lubricant made with specially processed base oils. It is specifically formulated with a wide-range viscosity grade for good high and low temperature performance and protection. Mobilube HD 80W-140 meets API Service GL-5. This product can be used for initial fill, topping-off and refill of enclosed automotive gears for manual transmissions, gear cases of semi-automatic transmissions where gear lubes are recommended, drive axles and final drives of passenger cars, trucks, taxicabs, and contractor and farm equipment. It should not be used in applications where automatic transmission fluid or engine oil is recommended. Grav. Pour Flash Brookfield cst at cst at Product API F F cp at -40 C 40 C 100 C V.I. Mobilube HD 80W-140 27.5-33 352 143,000 259 26.6 133 36

Mobil Product Book.qxd 6/25/04 4:09 PM Page 37 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilube HD LS 80W-90 is a multipurpose, heavy-duty, extreme pressure lubricant designed specifically for limited-slip differentials. It is made with specially processed base oils that provide good stability at high temperatures and good protection at low temperatures. Mobilube HD LS 80W-90 meets API Service GL-5, and can be used for topping-off and refill of limited-slip, final drives of passenger cars, trucks, taxicabs, and contractor and farm equipment. It should not be used in applications where engine oil or automatic transmission fluid is recommended. Grav. Pour Flash Brookfield cst at cst at Product API F F cp at -26 C 40 C 100 C V.I. Mobilube HD LS 80W-90 26.5-22 446 130,000 141 14.8 105 Mobilube HD Plus multipurpose, heavy-duty, extreme-pressure gear lubricants are recommended for enclosed gear cases on passenger cars, trucks, taxicabs and contractor and farm equipment. They are available in two multiviscosity grades: SAE 80W-90 and SAE 85W-140. Mobilube HD Plus 80W-90 and Mobilube HD Plus 85W-140 meet API Service GL-5, MT-1 and are approved against the Mack GO-J specification. Mobilube HD Plus gear lubricants are intended for initial fill, top-off and refill of hypoid and other drive axles, power dividers and final drives. These gear lubricants are ideal for equipment operated under high-speed shock-load, high speed low-torque, and low-speed hightorque conditions. An enhanced additive system improves their thermal stability at high temperatures, reduces carbon deposits, and provides better seal protection. Mobilube HD Plus gear lubricants have excellent antiwear properties, as shown by their performance in the full-scale L-37 and L-42 axle tests. They guard against rust and corrosion resulting from water contamination or storage in a humid atmosphere as demonstrated by passing the L-33 rust test. Grav. Pour Flash Brookfield cst at cst at Product API F F cp at C 40 C 100 C V.I. Mobilube HD Plus 80W-90 26.4-17 403 110,000 @ -26 141 14.5 102 Mobilube HD Plus 85W-140 24.8 5 446 46,000 @ -12 345 25.7 98 Mobilube SHC multipurpose synthetic gear lubricants are recommended for the year-round lubrication of enclosed automotive gear drives, including subzero conditions and where operations require lubricants with relatively high viscosity and excellent load-carrying ability. They are available in two multiviscosity grades: Mobilube SHC 75W-90 (SAE 75W-90) and Mobilube SHC 80W-140 (SAE 80W-140). Mobilube SHC products meet API Service GL-5, MT-1. Mobilube SHC products meet the following equipment builders standards: Eaton Roadranger E500 SHAES-256 (formerly PS-163); Mack GO-J Plus (75W-90 only), GO-J; Meritor O-76N (75W-90 only), O-80. Mobilube SHC gear lubricants are manufactured from synthesized hydrocarbon base oils and a stable sulfur-phosphorous additive package which improves their thermal stability at high temperatures, reduces carbon deposits, and provides better seal protection. They provide the viscosity-temperature characteristics necessary for products having wide temperature applications, without the addition of VI improvers. These completely shear-stable lubricants are suitable for topping-off or refilling hypoid and other drive axles, final drives, manual transmissions, power dividers, transfer cases, and other heavy-duty gear applications. In most on-highway applications, Mobilube SHC can provide a fuel economy advantage of up to three percent over comparable conventional mineral gear lubricants. Grav. Pour Flash cst at cst at Product API F F 40 C 100 C V.I. Mobilube SHC 75W-90 33.8-55 401 120 15.9 140 Mobilube SHC 80W-140 31.2-44 450 310 31.2 139 37

Mobil Product Book.qxd 6/25/04 4:09 PM Page 38 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilube XFD (extreme final drive oil) has been specifically formulated to provide optimum component life for final drives and differentials operating under heavy loads and/or in high ambient temperatures. These products provide outstanding bearing and gear protection, beyond that of TO-4 fluids, to help prevent premature failure due to fatigue. Mobilube XFD is available in SAE 50 (maximum operating ambient temperature of 90 F) and SAE 60 (maximum operating ambient temperature of 122 F). These products are not recommended for engines, transmissions, hydraulic systems or in final drives and axles containing friction materials and/or wet brakes. Grav. Pour Flash Brookfield, cp cst at cst at Product API F F at C 40 C 100 C V.I. Mobilube XFD 50 26.2-11 482 75,000 @ -15 206 18.4 98 Mobilube XFD 60 25.9 5 491 75,000 @ -10 334 25.2 97 Mobilux EP 023 is a semifluid, extreme pressure, lithium thickened grease for the lubrication of gears in leaky gearboxes. The grease contains antiwear additives and rust and corrosion inhibitors. Specific applications also include gearboxes, cutter heads, trams, oscillating arms, pots or gathering head drives, pump cases, and chain cases. It is recommended for use from -15 C to 120 C. Base Oil NLGI Drop Point cst at cst at Color Product Grade Thickener Structure C ( F) 40 C 100 C Visual Mobilux EP 023 000 Li 12-OH Semifluid 320 25 Medium Brown Mobilux EP 111 is extreme pressure, lithium thickened, molybdenum (oil-soluble) fortified, high viscosity flexible coupling grease. Mobilux EP 111 resists centrifugal separation of oil from the soap at high rotating speeds. This grease is particularly well-suited for the lubrication of heavily loaded gear couplings up to 2000 rpm and between -7 C and 121 C (20 F and 250 F). Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color AGMA Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual CG1/CG3 Mobilux EP 111 1 Li 12-OH 325 Smooth/Tacky 180 (356) 800 45 Black Meets 38

Mobil Product Book.qxd 6/25/04 4:09 PM Page 39 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Mobilux EP Series are extreme pressure, lithium thickened, multipurpose greases to lubricate both rolling element and plain bearings, under wet and dry conditions. Their smooth texture and excellent low-temperature pumping characteristics make the Mobilux EP 0 and Mobilux EP 1 products ideal for central dispensing systems and general use from -29 C to 121 C (-20 F to 250 F). Their superior resistance to oxidation is combined with the ability to protect against corrosion of copper alloys and the rusting of steel, even in the presence of alkaline water. Mobilux EP 2 is useful from -20 C to 130 C. Penetration Base Oil NLGI at 77 F Drop Point cst at cst at Color Product Grade Thickener Worked Structure C ( F) 40 C 100 C Visual Mobilux EP 0 0 Li 12-OH 370 Smooth 190 (374) 150 14 Amber Mobilux EP 1 1 Li 12-OH 325 Smooth 190 (374) 150 14 Amber Mobilux EP 2 2 Li 12-OH 280 Smooth 190 (374) 150 14 Amber Nyvac FR 200D Fluid is a water glycol fire-resistant hydraulic fluid. It provides excellent protection against rust in both the liquid and vapor phases. Its foam-resistance, low-temperature flow characteristics, and storage stability are also excellent. It contains diethylene glycol. Nyvac FR 200D Fluid has no deteriorating effect on synthetic or natural rubber packing or seal materials and is fully compatible with competitive water glycol fluids. It is approved by Factory Mutual (FM). Spec. Pour cst at cst at Color Product Grav. F 40 C 100 C Visual V.I. Nyvac FR 200D Fluid 1.080-22 42 8.4 Red 175 Water content, wt. % 43 Quaker Quintolubric 822/888 is a family of synthetic fire-resistant hydraulic fluids that contain no water, petroleum oils, chlorinated hydrocarbons or phosphate esters. These products should be used in those hydraulic applications where trouble-free fluids with a high degree of lubricity and fire resistance are required. Flash Spec. Pour COC Fire Point cst at cst at ISO Color Product Grav. at 77 F C ( F) C ( F) C ( F) 40 C 100 C V.I. VG Visual Quaker Quintolubric 888-46 0.900 <-20 (<-4) 275 (527) 325 (617) 46 10 220 46 Light Amber Quaker Quintolubric 888-68 0.910 <-20 (<-4) 275 (527) 326 (617) 68 14 215 68 Light Amber Quaker Quintolubric 822/450 0.922 <-26 (-15) >260 (500) >288 (550) 100 14.2 145 100 Light Amber 39

Mobil Product Book.qxd 6/25/04 4:09 PM Page 40 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Quaker Quintolubric 822-EHC is 100% active, synthetic polyol ester fire resistant hydraulic fluid. This product is designed to replace phosphate ester based fluids used in electrohydraulic control systems. Flash Spec. Grav. Pour COC Fire Point cst at cst at Product at 60 F C ( F) C ( F) C ( F) 40 C 100 C V.I. Quaker Quintolubric 822-EHC 0.910 <-26 (-15) >260 (500) >288 (550) 47 8.9 >140 Socony Oven Conveyor Lubricant was developed for the lubrication of oven conveyor chains up to 204 C (400 F). It consists of a light oil that carries colloidal graphite between moving parts. The carrier oil is sufficiently volatile to evaporate at the temperatures involved without leaving residues that might cause sticking. Spec. Pour Flash cst at cst at Color Product Grav. C C 40 C 100 C Visual Socony Oven Conveyor Lubricant 0.854-1 129 13 3.7 Black Thermrex Series are mineral quenching oils for the heat treatment of alloy steels. Thermrex R-21 is a mineral oil blend carefully selected to approximate ISO VG 22 and yield consistent Relative Cooling Indices (RCI) from 95 to 160. Thermrex F-43 is a fast quench oil augmenting selected base stocks with additive technology to yield an RCI of 195. Spec. Pour Flash cst at Quench Cooling Rate Product Grav. F F 40 C RCI % Time,Sec.ASTM D 6200, F/Sec. Thermrex R-21 0.867 35 342 25.7 120/130 23 112 Thermrex V-32 0.856 25 349 16.0 148/162 19 116 Thermrex F-43 0.864 20 324 20.0 185/200 15 160 Vacmul A6 and 2105 are flute grinding cutting oils. These transparent oils reduce abrasive tool wear and provide improved surface finish. They effectively remove heat generated by cutting or grinding. Vacmul A6 is a light-duty cutting oil designed for applications such as flute grinding. Vacmul 2105 is recommended as a drill flute grinding oil and for all arduous form grinding operations. It helps prevent overheating, distortion and dimensional inaccuracies when grinding at fast rates. Spec. Flash cst at Color Phos. Lubricity, Sulfur, Cl Product Grav. C 40 C ASTM % Fat % Total % % Vacmul A6 0.876 202 25 6 0.1 3.0 0.3 0.2 Vacmul 2105 0.872 204 29 2 0.1 5.0 0.5 40

Mobil Product Book.qxd 6/25/04 4:09 PM Page 41 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide Vacmul 280 and 281 are economical medium-duty, non-staining cutting oils for screw machine applications. Vacmul 281 contains an antimist additive. Both products can be used on the lube side and the cutting side of the equipment. Density Pour Flash cst at Color Lubricity, Sulfur, Cl Anti- Product Lbs/Gal C ( F) C ( F) 40 C ASTM Fat % Total % % mist Vacmul 280 7.31-6 (21) 196 (385) 28.5 4 1.5 0.3 1.4 No Vacmul 281 7.31-6 (21) 196 (385) 34 5 1.5 0.3 1.4 Yes Vacmul 3 A is a low-viscosity mineral oil intended for use as an EDM fluid or as a light-to-moderate-duty honing oil. Vacmul 3 D is a medium-duty, mineral-oil-based honing and grinding fluid. Vacmul 0 3 D is a medium-to-heavy-duty mineral oil based honing and grinding fluid. Vacmul 30 A 20 is a drawing oil for use as a wire drawing oil for non-ferrous metals such as aluminum and copper. It possesses a high degree of lubricity. It is designed for operations where more difficult-to-machine metals are used. It performs well on both ferrous and nonferrous metals. Vacmul 3 A, 3 D, 0 3 D and 30 A 20 are non-staining. Spec. Pour Flash cst at Color Dielectric Lubricity, Sulfur Cl Product Grav. C ( F) C ( F) 40 C ASTM Strength Fat % Total % % Vacmul 3 A 0.835-1 (+30) 127 (260) 4.3 1.5 28 Nil Nil Nil Vacmul 3 D 0.840 0 (32) 118 (245) 6.2 8.0 5.5 0.7 0.7 Vacmul 0 3 D 0.847 126 6 6.2 8.0 1.01 Nil Vacmul 30 A 20 0.902 (25) (450) 23.2 17.0 Nil Nil Vacsul 18 F is a heavy-duty cutting oil for difficult machining operations such as broaching. Spec. Flash cst at Color Product Grav. C 40 C ASTM Vacsul 18 F 0.898 194 33 Whiterex 425 is a highly refined mineral white oil. It has been specially treated so that color bodies have been removed so that it will not stain or discolor material with which it comes in contact. Whiterex 425 is qualified under USDA Regulation H-1 as suitable for use where there is a likelihood of incidental food contact. It may be used, therefore, in food processing plants or other applications where such contact with food is possible. Spec. Pour Flash cst at cst at Color ISO Product Grav. F F 40 C 100 C Visual V.I. VG Whiterex 425 0.877-5 400 53 7.0 White 60 68 41

Mobil Product Book.qxd 6/25/04 4:09 PM Page 42 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide QUESTIONS? CALL THE MOBIL TECHNICAL SUPPORT CENTER AT 1 (800) 662-4525 OR VISIT OUR WEBSITE AT www.mobil.com 42

Mobil Product Book.qxd 6/25/04 4:09 PM Page 43 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide HEALTH AND SAFETY PRECAUTIONS The health and safety of people who handle and use Mobil products are of vital interest and concern to us. Most Mobil products are regarded as generally safe. As with all petroleum products, however, excessive and prolonged contact or improper handling may result in adverse effects. Below are general health and safety precautions for handling petroleum products. For more details and product-specific information, we urge you to obtain and read carefully the Material Safety Data Sheet (MSDS) for each Mobil product handled to ensure that employees and users fully understand appropriate precautionary information relating to safe use. (See the discussion of Material Safety Data Sheets on page 46.) Material Safety Data Sheets for Mobil products are available on the web at http://emmsds.ihspsl.com, by calling Fax-on-Demand at 1-613-228-1467, by calling the MSDS Order Desk at 1-856-224-4644, or by contacting your local Mobil representative. ExxonMobil 24-Hour Emergency Line (Call Collect): 1-609-737-4411 in the U.S. FIRE HAZARDS Many petroleum products are highly volatile and flammable and must be handled with extreme caution to prevent fire or explosion. These include a few extra light viscosity lubricants and many solvents. The federal Occupational Safety and Health Administration (OSHA) has classified products with flash points below 37.8 C (100 F) as flammable, and products with flash points at or above 37.8 C and below 93.3 C (200 F) combustible. Products with flash points above 93.3 C (200 F), when used for their intended purposes, are not classified as fire hazards in accordance with OSHA (29 CFR 1910.1200). Petroleum products should not be stored or handled near sources of ignition, such as heat, sparks, open flame, sources of static electricity, or near strong oxidants such as chlorine (including swimming pool chemicals) and concentrated oxygen. WARNING: Empty containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition which may cause them to explode. Do not attempt to clean since residue is difficult to remove, and even a trace of remaining material constitutes an explosive hazard. Empty drums should be completely drained, properly bunged, and promptly returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations. 43

Mobil Product Book.qxd 6/25/04 4:09 PM Page 44 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide HEALTH AND SAFETY PRECAUTIONS (continued) HEALTH HAZARDS Health studies have shown that many petroleum hydrocarbons pose potential human health risks that may vary from person to person. As a precaution, exposure to liquids, vapors, and mists of petroleum products should be minimized. Inhalation Health specialists have established maximum concentration levels for hydrocarbon vapors in air to which nearly all workers may be safely exposed. Where applicable, the levels established for Mobil products are indicated in Material Safety Data Sheets. Prolonged breathing of hydrocarbon vapor concentrations in excess of prescribed limits may result in light-headedness, dizziness, and nausea. Inhalation of higher vapor concentrations may produce dizziness, headache, respiratory tract irritation, and unconsciousness. If a person is overcome by vapor, remove the individual from exposure at once and call a physician. If breathing is irregular or has stopped, start resuscitation and administer oxygen, if available. To avoid inhalation of excessive concentrations of hydrocarbons, store and handle highly volatile petroleum products such as solvents and solvent-cutback products only in open, well-ventilated areas. In special cases of indoor handling, e.g., laboratories, products always should be handled under vented hoods powered with explosion-proof motors. Under certain circumstances, sulfur compounds in hot asphalt may form the toxic gas hydrogen sulfide (H 2 S). Prolonged breathing of 50 to 100 ppm of H 2 S will produce eye and respiratory tract irritation, headache, nervousness, and nausea. At higher concentrations of H 2 S (700 to 1000 ppm) only a few breaths of the gas may lead to unconsciousness and could be fatal. To avoid breathing excessive concentrations of H 2 S, personnel should stand upwind of tank and bulk transport compartments containing asphalt, keep their faces at least two feet from compartment openings, and avoid breathing vapors when opening hatches and dome covers. Use respiratory equipment where necessary. Ingestion As a general precaution, if petroleum products are ingested, keep the person calm. DO NOT induce vomiting. Call a physician immediately, identifying the product and approximate amount swallowed. While petroleum products are generally not highly toxic, solvents and light oils with viscosities below 20.5 centistokes (100 SUS) at 37.8 C (100 F) pose a distinct hazard of being aspirated into the lungs and causing chemical pneumonitis. This is a delayed effect, which may not occur for days. Because of the risk of accidental swallowing, petroleum products should never be siphoned by mouth. Skin Contact Prolonged or repeated contact of petroleum oils, greases, or solvents with the skin can cause skin irritation and dermatitis. In case of skin contact, wash skin thoroughly with soap and warm water. A waterless hand cleaner and a soft skin brush can be used to help remove oils and greases. For certain products, dry-wiping is advised before using waterless hand cleaner. Refer to the product MSDS for specific instructions and precautions. Promptly remove petroleum-soaked clothing and launder before re-use. If a petroleum product contacts the eyes, flush the eyes with fresh water until the irritation subsides; if irritation persists, call a physician. If prolonged contact with petroleum products is unavoidable, wear chemical-resistant gloves, apron, splash goggles, and other protective clothing. 44

Mobil Product Book.qxd 6/25/04 4:09 PM Page 45 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide HEALTH AND SAFETY PRECAUTIONS (continued) High-pressure injection of grease through the skin (a grease gun injury) can cause serious delayed damage to soft tissues. Hydraulic oil under high pressure can cause similar injury. Regardless of the size or appearance of the wound, a physician should be contacted immediately, as treatment may require surgical intervention. Chronic Health Effects Although not the case with many highly or well refined petroleum oils, studies with laboratory animals have shown that prolonged exposure to certain petroleum products can cause cancer and other chronic health effects. Some petroleum oils and distillates have caused skin cancer in mice following skin painting tests over the animals lifetime. In similar tests, used motor oil also has caused skin cancer. Carefully check the product MSDS for such warning information. Inhalation of the vapors of most non-aromatic solvents has been shown to cause kidney damage in male rats. The normal hexane (n-hexane) component of hexane solvent is known to cause a form of motor nerve damage called peripheral polyneuropathy in humans. ADDITIONAL HEALTH AND SAFETY RECOMMENDATIONS You can protect yourself from petroleum-related hazards by exercising care and common sense in the handling of petroleum products. Appropriate engineering controls, work practices, and personal protection should be used to minimize skin contact and to keep exposure by inhalation as far below the recommended occupational exposure limit as is reasonably practical. Additional important health and safety information on any Mobil product is provided in the Mobil Material Safety Data Sheet, available on the web at http://emmsds.ihspsl.com, by calling Fax-on- Demand at 1-613-228-1467, by calling the MSDS Order Desk at 1-856-224-4644, or by contacting your local Mobil representative. 45

Mobil Product Book.qxd 6/25/04 4:09 PM Page 46 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide MATERIAL SAFETY DATA SHEETS (MSDSs) Why Is a Material Safety Data Sheet Important to You? Many petroleum products carry inherent health, environmental, and safety hazards. Careful attention to the precautions and emergency procedures outlined in the appropriate Material Safety Data Sheet (MSDS) can protect you and your co-workers from these risks. What Is an MSDS? An MSDS is a publication designed to provide the user of a Mobil petroleum product with detailed, comprehensive, and up-to-date health and safety information relating to that product. There is an individual MSDS for each Mobil product. The MSDS information is based on requirements of Occupational Safety and Health Administration (OSHA) Regulation 29 CFR 1910.1200, and the data presented are consistent with OSHA guidelines for informational content. These data are derived from various sources, including Mobil testing laboratories, independent research organizations, and raw material suppliers. What Kind of Information Does an MSDS Provide? An MSDS typically contains the following types of information: Physical data on the product (e.g., boiling range, vapor pressure) The nature and degree of health, environmental, and safety hazards associated with the product Precautionary guidelines for proper and safe handling of the product in order to avoid fire, explosion, and acute and chronic health hazards Emergency procedures in the event of fire, spill, or excessive exposure to the product by skin contact, ingestion, or inhalation How to Obtain an MSDS We urge every user of Mobil products to obtain the appropriate MSDS. To obtain a sheet on any Mobil product visit us on the web at http://emmsds.ihspsl.com or www.mobil.com, call Fax-on-Demand at 1-613-228-1467 for a copy faxed immediately, call the MSDS Order Desk at 1-856-224-4644, or contact your Mobil representative. ExxonMobil 24-Hour Emergency Line (Call Collect): 1-609-737-4411 in the U.S. 46

Mobil Product Book.qxd 6/25/04 4:09 PM Page 47 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES ADDITIVES FOR PREMIUM LUBRICATING OILS Many kinds of chemical additive agents are used in the manufacture of high-quality oils. They are either single-purpose materials or multipurpose materials. Listed below are descriptions of some commonly used additive types. Adhesive Agent The tacky, stringy materials which help form and retain uniform films on metal surfaces. Antiwear Agent Such materials adsorb or concentrate on metal surfaces to form films which minimize the direct metal-to-metal contact. The name applies to materials which enhance the antiwear characteristics of petroleum oils to permit loadings of double or triple that which can be handled by straight petroleum oils. These materials are nonstaining and noncorrosive. Defoamant When added to fluids, defoamants will promote rapid breakup of foam bubbles by weakening the oil films between the foam bubbles. Demulsifier Assists the natural ability of the oil to separate rapidly from water; helps inhibit rust.. Detergent When added to oils, these neutral-to-overbased (high alkalinity), metallic detergents which carry extra neutralization and cleanliness power, can reduce the level of acidic materials generated when burning high-sulfur fuel, and help keep the engine clean. Dispersant Suspends organic deterioration products in the lubricant to minimize their precipitation as harmful deposits. Extreme Pressure Agent These materials are more active than antiwear agents. They react with metal surfaces to form relatively oil insoluble surface films which reduce friction, control wear and prevent surface damage which could result from heavy loads and/or high temperatures. Such materials are used, for example, in the Mobilgear 600 Series oils. Automotive hypoid gears require lubricants which contain very active extreme pressure agents. Friction Modifier A general category of materials that are used to alter the frictional characteristics of a lubricant. They may be used to increase the lubricity or slipperiness where coefficient of friction may be important and to improve fuel economy/energy conservation. They may be used to reduce stick-slip or chatter in wet clutch applications. Oxidation Inhibitor Peroxide decomposers destroy the precursor of radical sources by converting the peroxides into harmless compounds. Chain stoppers interrupt the chain reaction between oxygen and hydrocarbon radicals to prevent or slow the formation of acidic materials, propagated materials, and sludges. Metal deactivators retard the oxidation-promoting catalytic effect of metals in a lubricating system. The metal surfaces or particles are covered by the agent which acts as a barrier to prevent the catalytic effect. The most catalytically active metal is copper; the second is lead, and the third is iron. Some additive agents function as chain stoppers, peroxide decomposers, and/or metal deactivators. Pour Point Depressant Improves the low-temperature fluidity of mineral oils and reduces wax formation at low temperatures. Rust Inhibitor The primary guide to rust inhibition is the ASTM D 665 Rust Test, which is a pass/fail test. Most lubricating oils contain rust inhibitors to enhance their ability to minimize rusting. Spectography A lab test method that measures the concentration of metallic particles smaller than ten microns. Index Improver When added to oils, these high-molecular-weight polymers improve the viscosity index by coiling and uncoiling in response to temperature. They do not affect the pour point at low temperature while providing sufficient viscosity at high temperature. APPENDICES 47

Mobil Product Book.qxd 6/25/04 4:09 PM Page 48 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES APPENDICES SAE VISCOSITY GRADES FOR ENGINE OILS Low-Temperature (C ) Low-Shear-Rate Low-Shear-Rate Low-Temperature (C ) Pumping Kinematic Kinematic High-Shear-Rate SAE Cranking (4) (cp) (5) (cst) (5) (cst) (6) (cp) (3) (cp) Max with at 100 C at 100 C at 150 C Grade Max No Yield Stress (4) Min Max Min 0W 6,200 at -35 60,000 at -40 3.8 5W 6,600 at -30 60,000 at -35 3.8 10W 7,000 at -25 60,000 at -30 4.1 15W 7,000 at -20 60,000 at -25 5.6 20W 9,500 at -15 60,000 at -20 5.6 25W 13,000 at -10 60,000 at -15 9.3 20 5.6 < 9.3 2.6 30 9.3 < 12.5 2.9 40 12.5 < 16.3 2.9 (7) 40 12.5 < 16.3 3.7 (8) 50 16.3 < 21.9 3.7 60 21.9 < 26.1 3.7 (1) Note: 1cP = 1mPa*s: 1cSt = 1mm 2 /s (2) All values are critical specifications as defined by ASTM D 3244 (3) ASTM D 5393 (4) ASTM D 4684; note that the presence of any yield stress detectable by this method constitutes a failure regardless of viscosity (5) ASTM D 445 (6) ASTM D 4683, CEC L-36-A-90 (ASTM D 4741), or ASTM D 5481 (7) 0W-40, 5W-40, and 10W-40 (8) 15W-40, 20W-40, 25W-40, and 40 SAE J306 VISCOSITY GRADES FOR GEAR OILS SAE Maximum Temperature for BF Kin ViscosIty, 100 C Grade 150,000 cp min. (1) max. 70W -55 C 4.1 75W -40 C 4.1 80W -26 C 7.0 85W -12 C 11.0 80 7.0 <11.0 85 11.0 <13.5 90 13.5 <24.0 140 24.0 <41.0 250 41.0 (1) Limits must also be met after testing in CEC L-45-T-93 Method C (20 hours) 48

Mobil Product Book.qxd 6/25/04 4:09 PM Page 49 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES ISO VISCOSITY CLASSIFICATION SYSTEM ISO Mid-Point Ranges cst @ cst @ 40 C Grades 40 C Minimum Maximum 2 2.2 1.98 2.42 3 3.2 2.88 3.52 5 4.6 4.14 5.06 7 6.8 6.12 7.48 10 10 9.00 11.0 15 15 13.5 16.5 22 22 19.8 24.2 32 32 28.8 35.2 46 46 41.4 50.6 68 68 61.2 74.8 100 100 90.0 110 150 150 135 165 220 220 198 242 320 320 288 352 460 460 414 506 680 680 612 748 1000 1000 900 1100 1500 1500 1350 1650 APPENDICES 49

Mobil Product Book.qxd 6/25/04 4:09 PM Page 50 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES APPENDICES GREASE CONSISTENCY CLASSIFICATION: NATIONAL LUBRICATING GREASE INSTITUTE (NLGI) AMERICAN STANDARD LUBRICATING GREASE CLASSIFICATION 60-STROKE WORKED GRADE PENETRATION AT 77 F (25 C) NLGI No. 000 445-475 NLGI No. 00 400-430 NLGI No. 0 355-385 NLGI No. 1 310-340 NLGI No. 2 265-295 NLGI No. 3 220-250 NLGI No. 4 175-205 NLGI No. 5 130-160 NLGI No. 6 85-115 The grades are defined as ranges of the values of the 60-stroke worked penetration, in tenths of millimeters, as determined by the ASTM Designation D 217, Cone Penetration of Lubricating Grease. VISCOSITY CONVERSION TABLE Redwood Redwood Redwood Kinematic SUS Engler No. 1 Sec. Kinematic SUS Engler No. 1 Sec. Kinematic SUS Engler No. 1 Sec. 2 32.6 1.14 30.8 46 214 6.15 190 240 1112 32 990 3 36.0 1.22 33.2 50 233 6.65 207 250 1159 33 1030 4 39.1 1.31 35.8 55 256 7.25 228 260 1205 34 1070 5 42.5 1.40 38.4 60 279 7.9 248 270 1251 36 1110 6 45.7 1.48 41.0 65 302 8.6 268 280 1297 37 1150 7 49.0 1.56 43.7 70 325 9.25 286 290 1344 38 1190 8 52.0 1.65 46.5 75 349 9.85 307 300 1390 40 1230 9 55.7 1.74 49.2 80 372 10.5 329 315 1460 41 1300 10 59.0 1.83 52.1 85 395 11.2 349 330 1529 43 1350 11 62.5 1.92 55.2 90 418 11.8 370 350 1622 46 1440 12 66.2 2.02 58.4 95 442 12.5 390 370 1715 49 1520 13 70.0 2.12 61.6 100 465 13.2 410 390 1807 51 1600 15 77.5 2.32 68.2 110 511 14.5 450 410 1900 54 1690 17 85.5 2.55 75.2 120 558 15.8 490 430 1990 57 1770 19 94 2.77 82.8 130 605 17.1 530 450 2090 59 1850 21 100 3.00 90.4 140 649 18.4 570 470 2180 62 1930 23 111 3.23 98 150 695 19.7 620 490 2270 64 2010 25 120 3.46 106 160 742 21.0 660 500 2320 66 2050 28 133 3.83 117 170 788 22.5 700 550 2540 72 2260 30 142 4.09 125 180 834 24.0 740 600 2780 79 2460 33 155 4.46 137 190 881 25.0 780 650 3010 86 2670 35 164 4.71 145 200 927 26.0 820 700 3240 92 2880 38 178 5.10 157 210 973 28.0 860 750 3470 99 3080 40 187 5.35 166 220 1020 29.0 900 800 3700 105 3280 43 200 5.75 178 230 1066 30.0 940 DEGREES API CORRESPONDING TO SPECIFIC GRAVITIES AT 60/60 F AND POUNDS PER GALLON Degrees Specific Pounds Degrees Specific Pounds Degrees Specific Pounds API Gravity (S.G.) Gallons API Gravity (S.G.) Gallons API Gravity (S.G.) Gallons 1.36 1.065 8.870 14.4 0.970 8.078 30.2 0.875 7.286 1.99 1.060 8.829 15.5 0.965 8.036 31.1 0.870 7.244 2.62 1.055 8.787 15.9 0.960 7.995 32.1 0.865 7.203 3.26 1.050 8.745 16.7 0.955 7.953 33.0 0.860 7.161 3.91 1.045 8.704 17.5 0.950 7.911 34.0 0.855 7.119 4.56 1.040 8.662 18.2 0.945 7.870 35.0 0.850 7.078 5.21 1.035 8.620 19.0 0.940 7.828 36.0 0.845 7.036 5.88 1.030 8.578 19.8 0.935 7.786 36.9 0.840 6.994 6.55 1.025 8.537 20.6 0.930 7.745 38.0 0.835 6.952 7.23 1.020 8.495 21.5 0.925 7.703 39.0 0.830 6.911 7.91 1.015 8.453 22.3 0.920 7.661 40.0 0.825 6.869 8.60 1.010 8.412 23.1 0.915 7.620 41.0 0.820 6.827 9.30 1.005 8.370 24.0 0.910 7.578 42.1 0.815 6.786 10.00 1.000 8.328 24.8 0.905 7.536 43.2 0.810 6.744 10.70 0.995 8.287 25.7 0.900 7.494 44.3 0.805 6.702 11.4 0.990 8.245 26.6 0.895 7.453 45.4 0.800 6.661 12.2 0.985 8.203 27.5 0.890 7.411 12.9 0.980 8.162 28.4 0.885 7.369 13.6 0.975 8.120 29.3 0.880 7.328 50

Mobil Product Book.qxd 6/25/04 4:09 PM Page 51 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES COMMERCIAL ENGINE OILS SPECIFICATIONS COMMERCIAL ENGINE OILS MOBIL DELVAC PRODUCT NAME DELVAC 1 1300 SUPER 1300 SUPER 1600 VISCOSITY GRADE 5W-40 15W-40 10W-30 30, 40, 50 API GASOLINE SE (1972 1979) S S SF (1972 1979) S S S SG (1989 1993) S S SH (1994 1996) S S SJ (1997 2000) M M M SL (2001 ) M M M API DIESEL OFF HWY CF (1994 ) M M M M 4-CYCLE CF-4 (1990 ) M M M CG-4 (1995 ) M M M CH-4 (1999 ) M M M CI-4 (2002 ) M M M ACEA DIESEL E2 S M E3 M E4 M E5 M M JASO DH-1 M M M ENGINE BUILDERS CATERPILLAR ECF-1 M M M CUMMINS CES 20071 S S CES 20076 A A A CES 20077 A A CES 20078 A A A DETROIT DIESEL 7SE 270 M M MACK EO-M Plus A A A EO-N Premium Plus 03 A A VOLVO VDS S S VDS-2 S S S VDS-3 A A A MERCEDES BENZ Sheet 228.3 A A Sheet 228.5 A ALLISON C-4 S S S (30 only) APPENDICES M = MEETS A = APPROVED S = SUITABLE FOR USE THE ABOVE IS NOT INTENDED TO REPLACE THE PRODUCT DATA SHEET WHICH CONTAINS THE MOST CURRENT INFORMATION 51

Mobil Product Book.qxd 6/25/04 4:09 PM Page 52 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES APPENDICES GASOLINE ENGINE OIL APPLICATION CHART SYNTHETIC DRIVE CONVENTIONAL PRODUCT NAME MOBIL1 WITH SUPERSYN CLEAN PLUS DRIVE CLEAN VISCOSITY GRADE 0W-20 0W-30 5W-30 10W-30 0W-40 15W-50 5W-30 10W-30 10W-40 5W-20 5W-30 10W-30 10W-40 20W-50 HD-30 API SPECIFICATION SL (2001- S S S S S S X X X X X X X X X ILSAC GF-3 S S S S S X X X X SH (1994-1996) S S S S S X X X X X X X X SJ (1997-2000) S S S S S S X X X X X X X X ILSAC GF-2 S S S S S X X X ACEA A1/B1, A5/B5 X X X X (A1/B1 ONLY) ACEA A3/B3/B4 X X CF (1994- X X X X X X X X X ENGINE BUILDERS GM 4718-M (Corvette) M X M FORD M2C153-G X X X X X M2C153-H R X CHRYSLER MS-9215 (Viper) X MERCEDES BENZ MB229.5 X VW 502/503.01/505 X BMW LONGLIFE 01 X M=MEETS S=SURPASSES X=APPROVED R=RECOMMENDED 52

Mobil Product Book.qxd 6/25/04 4:09 PM Page 53 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES ANSI-AGMA INDUSTRIAL GEAR LUBRICANTS 9005-D94 R&O inhibited gear oil AGMA Lubricant range cst Extreme pressure gear oil Synthetic gear oil No. at 40 C AGMA Lubricant No AGMA Lubricant No. 0 28.8 to 35.2 None 0 S 1 41.4 to 50.6 None 1 S 2 61.2 to 74.8 2 EP 2 S 3 90 to 110 3 EP 3 S 4 135 to 165 4 EP 4 S 5 198 to 242 5 EP 5 S 6 288 to 352 6 EP 6 S 7, 7 Comp* 414 to 506 7 EP 7 S 8, 8 Comp* 612 to 748 8 EP 8 S 8A Comp* 900 to 1100 8A EP None 9 1350 to 1650 9 EP 9 S 10 2880 to 3520 10 EP 10 S 11 4140 to 5060 11 EP 11 S 12 6120 to 7480 12 EP 12 S 13 190-220 at 100 C*** 13 EP 13 S 14R** 428.5 to 857.0 at 100 C*** None None 15R** 857.0 to 1714.0 at 100 C*** None None APPENDICES AGMA Lubricant No. ISO Grade Mobil Product Mobil Synthetic Product 0 32 Mobil DTE Oil Light Mobil SHC 624 1 46 Mobil DTE Oil Medium Mobil SHC 625 2 68 Mobil DTE Oil Heavy Medium Mobil SHC 626 3 100 Mobil DTE Oil Heavy Mobil SHC 627 4 150 Mobil DTE Oil Extra Heavy Mobil SHC 629 5 220 Mobil DTE Oil BB Mobil SHC 630 6 320 Mobil DTE Oil AA Mobil SHC 632 7 460 None Mobil SHC 634 AGMA Compounded Mobil Product 7 Comp* 460 Mobil 600W Super Cylinder Oil 8 Comp* 680 Mobil Extra Hecla Super Cylinder Oil 8A Comp* 1000 Mobil Extra Hecla Super Cylinder Oil Mineral AGMA Lubricant No. ISO Grade Mobil Product Mobil Synthetic Product 2 EP 68 Mobilgear 626 None 3 EP 100 Mobilgear 627 None 4 EP 150 Mobilgear 629 Mobilgear SHC 150 5 EP 220 Mobilgear 630 Mobilgear SHC 220 6 EP 320 Mobilgear 632 Mobilgear SHC 320 7 EP 460 Mobilgear 634 Mobilgear SHC 460 8 EP 680 None Mobilgear SHC 680 8A EP 1000 None Mobilgear SHC 1000 9 EP 1500 None Mobilgear SHC 1500 10 EP None Mobilgear SHC 3200 11 EP None None 12 EP None None 13 EP Mobiltac QQ None 14R** None None 15R** Mobiltac 325 NC, 375 NC None * Oils marked Comp are compounded with 3% to 10% fatty or synthetic fatty oils. ** Residual compounds-diluent type, commonly known as solvent cutbacks, are heavy oils containing a volatile, non-flammable diluent for east of application. The diluent evaporates leaving a thick film of lubricant on the gear teeth. Viscosities listed are for the base compound without diluent. *** Viscosities of AGMA Lubricant Number 13 and above are specified at 100 C (210 F) as measurement of viscosities of these heavy lubricants at 40 C (100 F) would not be practical. 53

Mobil Product Book.qxd 6/25/04 4:09 PM Page 54 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES APPENDICES NATURAL GAS ENGINE OIL RECOMMENDATIONS ENGINE MANUFACTURER FUEL MODELS RECOMMENDATION Ajax (Cooper Cameron) CG 2-Cycle Mobil Pegasus Special Caterpillar CG 6.25" Bore Mobil Pegasus 805, 905 CG 3400, 3500, 3600 Mobil Pegasus 805, 905 LFG All Mobil Pegasus 805, 905, 605 Cooper Bessemer CG 2-Cycle Mobil Pegasus 701, 801 CG 4-Cycle Mobil Pegasus 505, 805 Dresser Rand - Ingersoll Rand CG Category I Mobil Pegasus 701/30, 801/30, 505/30 CG Category II Mobil Pegasus 701/30, 801/30, 505/30 CG Category III Mobil Pegasus 505/30, 801/30 Clark CG 2-Cycle Mobil Pegasus 701, 801 Enterprise CG All Mobil Pegasus 505, 805 Fairbanks-Morse (MEP) CG 2-Cycle Mobil Pegasus 505/30, 505, 805 Nordberg (Hatch and Kirk) CG All Mobil Pegasus 505 LFG All Mobil Pegasus 610 Superior (Cooper Cameron) CG G, GT, GST, GTLA, GTLB Mobil Pegasus 710 White (Cooper Cameron) CG 1700, 2400 Mobil Pegasus 805 LFG G, GT, GST Mobil Pegasus 610 LFG 1700, 2400 Mobil Pegasus 605 Waukesha CG VHP - F2895, F3521, L5796, Mobil Pegasus 805, 905, 710 L7047, P9390 G, GSI, GL CG VHP - F3524, L5794, L7044 GSI Mobil Pegasus 805, 905 - L5774, L5794 LT Mobil Pegasus 805, 905 VSG - F11G, GSI, GSID Mobil Pegasus 805, 905 CG VGF - F18, H24, L36, P48 Mobil Pegasus 805, 905 G, GL, GLD, GSID CG AT 25/27, 8L, 12V, 16V, GL Mobil Pegasus 805, 905 LFG VHP, AT Mobil Pegasus 605, 610 BMG VHP, AT Mobil Pegasus 605 DG All Mobil Pegasus 810 Worthington (Dresser Rand) CG 2-Cycle Mobil Pegasus 701, 801 CG 2-Cycle TC Mobil Pegasus 801, 505 CG 4-Cycle Mobil Pegasus 801, 505 NOTES: 1 - THE MOBIL PEGASUS 605 IS A PREFERRED ALTERNATIVE FOR CATERPILLAR LANDFILL GAS APPLICATIONS. FUELS: CG - CLEAN GAS - NATURAL GAS 90 95% METHANE WITH <10 PPM H 2 S AND <5% LIQUID HYDROCARBON LFG - LANDFILL GAS - 40 60% METHANE, 20 40% CO 2, 500 1500 ppm H 2 S, 50 150 ppm CHLORINATED COMPOUNDS AND QUANTITIES OF SILICON COMPOUNDS DG - DIGESTER GAS - SEWER GAS - 50 70% METHANE, 20 30% CO 2 CAN CONTAIN LARGE AMOUNTS OF CORROSIVE COMPOUNDS (H 2 S) BMG - BIO - MASS GAS - SEE DIGESTER GAS * YOU SHOULD ALWAYS CHECK WITH THE MANUFACTURER FOR LUBRICANT RECOMMENDATIONS 54

Mobil Product Book.qxd 6/25/04 4:09 PM Page 55 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES VISCOSITY CLASSIFICATION EQUIVALENTS APPENDICES ISO VISCOSITY CLASSIFICATION SYSTEM Many petroleum products are graded according to the ISO Classification System, approved by the International Standards Organization (ISO). Each ISO viscosity grade number corresponds to the mid-point of a viscosity range expressed in centistokes (cst) at 40 C. For example, a lubricant with an ISO grade of 32 has a viscosity within the range of 28.8 35.2, the midpoint of which is 32. Rule-of-Thumb: The comparable ISO grade of a given product whose viscosity in SUS at 100 F is known can be determined by using the following conversion formula: SUS @ 100 F 5 =cst @ 40 C 55

Mobil Product Book.qxd 6/25/04 4:09 PM Page 56 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES APPENDICES UNDERSTANDING OIL ANALYSIS VISCOSITY Probably the most important single property of a lubricating oil. It is a major factor in the development of the load carrying ability of an oil. It is defined as resistance to flow at 40 degrees Centigrade and typically reported in Centistokes (cst). WEAR METALS The presence of these metals can indicate a wear problem on a microscopic level before the problem can be detected by conventional means. The existence of a wear problem is determined not only by absolute values of metals, but more importantly by a relative increase or trend in one or more of these metals. METAL Iron Chromium Lead Copper Tin Aluminum Nickel Silver Manganese SOURCES Cylinders, Gears, Rings, Crankshafts, Liners, Bearings, Rust Rings, Bearing and Liner Plating Bearing Overlays Hydraulic Pumps, Bearing Cages, Bushings, Bronze Components Bearing Plating, Compressors Pistons, Bearing and Pump, Blower and Compressor Impellers Valves Bearing and Bushing Plating Trace Element in Gas Turbine Components CONTAMINANTS These elements can be an indicator of contamination. The combination of contaminant and wear metals can indicate a harmful machine operating condition. CONTAMINANT Silicon Boron Sodium Potassium Acid Oxidation Water Glycol Fuel Soot Chlorine SOURCES Abrasive Dirt, Sealant, Defoamant Anti-freeze, Oil Additive Anti-freeze, Oil Additive Anti-freeze, Oil Additive Oil Degradation (TAN) Thermal Degradation of Oil Anti-freeze, Process Water, Condensation Anti-freeze Fuel System Incomplete Combustion, Blow-by Land Fill Gas, Sea Water ADDITIVES A chemical substance added to oil to impart or improve certain properties. ADDITIVE Magnesium Calcium Barium Phosphorus Zinc Molybdenum FUNCTIONS Dispersant/Detergent (TBN) Dispersant/Detergent (TBN) Dispersant/Detergent Antiwear Antiwear Antiwear For further information contact your Mobil representative or go to www.mobil.com. 56

Mobil Product Book.qxd 6/25/04 4:09 PM Page 57 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES & TABLES Date of Manufacture code interpretation YARDMARK INTERPRETATION KEY EXAMPLE OF DRUM LABEL APPENDICES Mobil Almo 529 Rock Drill Oil Sample manufacturing date: PA1L2 First letters indicate which plant manufactured the product. Example PA1L2 = Port Allen Code Plant Code Plant X Beaumont PA Port Allen P Paulsboro BY Bayonne 1WC Cicero OL Olathe The next two digits indicate the YD Kansas City day of the month the product was made. Example PA1L2 = 1st day of the month The next letter indicates the month of manufacture. Example PA1L2 = L indicates November as the month of manufacture Code Month Code Month Code Month A Jan E May J Sept B Feb F June K Oct C Mar G July L Nov D Apr H Aug M Dec The last number indicates the year of manufacture. Example PA1L2 = 2002 PA1L2 means this product was made on November 1, 2002 at Port Allen. 57

Mobil Product Book.qxd 6/25/04 4:09 PM Page 58 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES APPENDICES 58

Mobil Product Book.qxd 6/25/04 4:09 PM Page 59 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES APPENDICES 59

Mobil Product Book.qxd 6/25/04 4:09 PM Page 60 chris Share 3:2004:G010702 Hahn Product Guides:Mobil Product Guide NOTES APPENDICES 60