DESIGN OF THE STUDY-RESEARCH METHODOLOGY RESEARCH DESIGN: The research was Exploratory where it tried to cover Who, Where, When, How & Why about the existing customers of Citifinancial. DATA COLLECTION: Mainly two types of data were used for data collection viz: Secondary data: The main source was the customer database, which was given by Citifinancial. It was used to find out all general information about the existing customers such as their names, their residential & official address & their phone numbers. Primary data: The main source was the questionnaire, which was designed to collect all the primary data such customer reaction towards all the aspects of the product. RESEARCH TYPE: The type of research used to collect primary data was Quantitative, where all the findings were quantified to draw interpretations. On the basis of which conclusions were made. Telephonic interview was used to collect data, where customers were interviewed for five to ten minutes over the telephone.
CONCLUSION The whole study shows how customers are satisfied with the personal loans offered by Citifinancial except for the interest & processing fees part, with which the customers are unsatisfied. This is not only the picture of south Bangalore but of whole Bangalore & of whole India. Customers across all cities/tows, wherever Citifinancial is present, are unsatisfied with the rate of interest & processing fees being charged by Citifinancial. Citifinancial is now working on it & will soon come out with a new rate that is competitively set & in accordance to RBI guidelines & customers preference. OBJECTIVES OF THE STUDY:
To understand the efficiency and effectiveness of existing services at shreepatigouda gas agency Indi To know the customers opinion with regard to after sales service of their gas delivery To know the satisfaction of customer with regard to post sales services. To identify the factors which affects improvement and development in rendering service SCOPE OF THE STUDY: The study will help the company to know their efficiency and effectiveness of existing services. The company can find out the impact of service in developing new customers. The study will help the company to make proper marketing strategy for their weaker areas. The study covers the customers of shreepatigouda gas agency indi town RESEARCH METHODOLOGY:
Data source Primary (field survey) Secondary (Internet, Catalogues, Broachers.) Area of research Indi Research Approach Survey Method Research Instrument Questionnaire Sample Unit All existing and potential customers Sampling Method Sample Size Random sampling 100 units Data Analysis: Spss
RESEARCH METHODOLOGY The quality and reliability of research study is dependent on the information collected in a scientific and methodological manner. Scientific planning of designing of research method is a blue print for any research study. Therefore, proper time and attention should be given in designing the plan of research. While proper definition of problem tells the researcher where he has to go, proper design tells him how he should go. Selection of methodology for a particular project is made easy by sorting out a number of alternative approaches, each of them having its own advantage and disadvantages. Efficient design is that which ensure that the relevant data are collected accurately. The researcher has to think about what procedure and techniques should be adopted in the study. He should arrive at the final choice by seeing that the methodology chosen for project is indeed the best one, when compared with others. RESEARCH DESIGN : Research design is the first and foremost step in methodology adopted and undertaking research study. It is overall plan for the collection and analysis of data
in the research project. Thus it is an organized, systematic approach to be the formulation, implementation and control of research project. Infact a well planned and well balanced research design guards against collection of irrelevant data and achieves the result in the best possible way. SAMPLE DESIGN :- The universe of study being large, researcher has to resort to sampling method of data collection. On the basis of a section of the universe selected in a prescribed manner one is able to deduce for the universe. For the sample results to be applicable on the universe, sample should be adequately chosen so to make it representative and reliable. Population : General Managers in the operation. Sample : Sample covers the respondents of 20 departments. Ø DATA COLLECTION METHOD : Data are the bricks with which the researcher has to make a house. While the quality of research findings depend on data, the adequacy of appropriate data in turn depends upon proper method of data collection. A number of methods are
at the disposal of the researcher of which one has to select the most appropriate one for visualizing the research objective. Thus he has to see that the method adopted is compatible with the resources and research study. a) Primary Data : Data which are collected fresh and for the first time and thus happens to be original in character. Primary data are gathered for specific purpose. b) Secondary data : Data that collected from primary data i.e., they are already exit some where. For the purpose of our study we collected both the data. Ø For the purpose of this study we collected : Secondary data through induction manual, magazines, corporate journals and web site & Primary data through. a) Questionnaire method. b) Interview method.
In our study the main emphasis was on the questionnaire method. We used questionnaire method which consisted of 4 attributes and again they were further divided into 12 parameter. Question, which were asked, were of multiple choice in nature and were of closed ended. Personal interview were also conducted. There was face to face conversation between researcher and the respondents. All the answers were recorded while interview was in progress. Through interviewing, additional information was received regarding our study. Ø Data Analysis : Data collected, if not subjected to analysis is meaningless. For the purpose, data after collection has to be presented in the form of tables, diagrams and graphs. It is only after presentation that data can be analyzed, interpreted and inferences can be drawn. RESEARCH METHODOLOGY The quality and reliability of research study is dependent on the information collected in a scientific and methodological manner. Scientific planning of designing of research method is a blue print for any research study.
Therefore, proper time and attention should be given in designing the plan of research. While proper definition of problem tells the researcher where he has to go, proper design tells him how he should go. Selection of methodology for a particular project is made easy by sorting out a number of alternative approaches, each of them having its own advantage and disadvantages. Efficient design is that which ensure that the relevant data are collected accurately. The researcher has to think about what procedure and techniques should be adopted in the study. He should arrive at the final choice by seeing that the methodology chosen for project is indeed the best one, when compared with others. RESEARCH DESIGN : Research design is the first and foremost step in methodology adopted and undertaking research study. It is overall plan for the collection and analysis of data in the research project. Thus it is an organized, systematic approach to be the formulation, implementation and control of research project. Infact a well planned and well balanced research design guards against collection of irrelevant data and achieves the result in the best possible way.
SAMPLE DESIGN :- The universe of study being large, researcher has to resort to sampling method of data collection. On the basis of a section of the universe selected in a prescribed manner one is able to deduce for the universe. For the sample results to be applicable on the universe, sample should be adequately chosen so to make it representative and reliable. Population : General Managers in the operation. Sample : Sample covers the respondents of 20 departments. Ø DATA COLLECTION METHOD : Data are the bricks with which the researcher has to make a house. While the quality of research findings depend on data, the adequacy of appropriate data in turn depends upon proper method of data collection. A number of methods are at the disposal of the researcher of which one has to select the most appropriate one for visualizing the research objective. Thus he has to see that the method adopted is compatible with the resources and research study.
a) Primary Data : Data which are collected fresh and for the first time and thus happens to be original in character. Primary data are gathered for specific purpose. b) Secondary data : Data that collected from primary data i.e., they are already exit some where. For the purpose of our study we collected both the data. Ø For the purpose of this study we collected : Secondary data through induction manual, magazines, corporate journals and web site & Primary data through. a) Questionnaire method. b) Interview method. In our study the main emphasis was on the questionnaire method. We used questionnaire method which consisted of 4 attributes and again they were further divided into 12 parameter. Question, which were asked, were of multiple choice in nature and were of closed ended.
Personal interview were also conducted. There was face to face conversation between researcher and the respondents. All the answers were recorded while interview was in progress. Through interviewing, additional information was received regarding our study. Ø Data Analysis : Data collected, if not subjected to analysis is meaningless. For the purpose, data after collection has to be presented in the form of tables, diagrams and graphs. It is only after presentation that data can be analyzed, interpreted and inferences can be drawn. CONCLUSIONS After conducting the survey and analysis the data collected, it can be concluded that:- 1. The employees are not much aware of internal customer supplier concept.
2. Employees of different departments believe in concentrating only upon their departmental functions. 3. Things are seen from department point of view and not from organization s point of view. 4. Certain problems which are faced by almost every department are:- a) Inconsistency in quality of product/service supplied by the respective suppliers. b) No group discussions, workshops or customer care programmes take place between the customer - supplier deptts. c) Requirement of a lot of follow up to the work done. 5. Quality of the product service provided needs improvement. 6. Lacking of customer training & knowledge sharing. 7. Need of improvement in feedback communication. 8. There is a need for the adoption of innovative tools and techniques.
9. Communication, coordination and feedback to internal customer to be strengthened. 10. There was no flexibility in adopting cost control techniques. 11. Lot of wastage of resources and under utilization machine/men-hours. 12. There was no promptness of service/response to the customer department. 13. Irregular availability of data, records and diagnostics approach to the customer deptt. 14. There was no consistency in services and lengthy strength. 15. Internet was limited. 16. No routine check-up of pc and printers. 17. Lacking in the best technology like ON LINE TRACKING of each batch of fabric etc. SUGGESTIONS
General suggestions for improving internal customer satisfaction to be followed by the organization to be really successful in exploiting the fullest potential of their employees are as follows: 1. Cost control measures 2. Promptness 3. Pre-detection & proper maintenance of old dg sets 4. Consistency in quality of steam 5. Adherence to delivery commitments 6. Participative planning with customers 7. Communication and coordination should be more effective 8. Optimizing of machine and men-hours 9. Needs improvement in quality of product and services provided 10. Submission of summarized quality reports daily 11. To highlight problem and record the solution 12. Resistance in accepting the feedback regarding damages 13. Advanced information regarding any new quality is needed
14. To be more effective in inventory control and ordering through diagnostic approach 15. Training and knowledge sharing of financial reports 16. Provide advanced information about the failure 17. Needs better planning of procurement of packing material 18. Improve customer service in all respects 19. Resolve day to day problem quickly 20. Improvement in timely payment
Customer satisfaction to a company can be defined as: The company's ability to fulfill the business, emotional, and psychological needs of its customers; Quality of service delivery expected by the customers. An internal drive to satisfy an unsatisfied need of customer. Providing good service in a pleasant manner and meeting the customer's expectations; The measure of the degree to which a product or service meets the customer's expectations; Comparison of expectations versus actual experience. Why and how to measure Customer Satisfaction? Most companies say that they believe in great customer service, but few set up a system to ensure that they provide it. To deliver excellent customer service takes both understanding what your customers want and the way to see that they receive it. Delighted Customers Are Profitable: It is widely accepted that it is almost five times more profitable to sell to an existing customer than to find a new customer. More important, the difference between satisfied customers and very satisfied customers can make a big difference in customer repeat business and the profits. Measuring client satisfaction is very important and distinguishing between degrees of satisfaction by using customer surveys is crucial. Measuring Customer Satisfaction There are several ways to gather input from customers. The simplest way to find out how customers feel and what they want is to ask them. If you have only 20 customers, you can talk to each one personally. The advantage of this approach is that you'll get a personal "feel" for each customer.
The disadvantage is that you'll gather different information from each customer depending on how the conversation goes. Customer surveys with standardized survey question insure that you will collect the same information from everyone. Remember that few of your customers will be interested in "filling out a questionnaire". It's work for them without much reward. By launching a customer survey as an attempt to find out "how we can serve you better" -- your customers will feel less put upon. Satisfaction (and dissatisfaction) affects your organizations bottom line The value of satisfaction is often underestimated. Loyal customers affect an organization s success, which can be difficult to quantify. Loyal customers grow your business by increasing market share. Over a lifetime, a loyal customer purchases more, purchases at a premium (they are less sensitive to price), costs less to sell to, and refers your business to others. An essential part of assessing satisfaction includes identifying dissatisfaction. Dissatisfied customers often hold the information you need to succeed. Understanding when and why dissatisfaction occurs, helps you implement changes to gain and retain future customers. No matter what type of business you are in, surveys are an important tool to help you collect the information you need to understand and evaluate satisfaction. Benefitssssssssssss There s absolutely no way I could ve gotten an experience as full as this one anywhere else. The
combination of intense, hands on work at the plant and the incredible Spanish life made for a great experience. It was exactly what I needed to convince myself of following a career in chemical engineering. My other options for the summer were all research laboratories which, though interesting, are not new to me. I also made more friends and acquaintances the first month than at MIT in two years. And with them I was able to visit much of Spain and France. Being non-engineer/science people was also interesting; I got a new perspective in life in the real world.