CERTIFICATION PROGRAM TRAINING NETWORK SECURITY I ENDPOINT SECURITY I DATA SECURITY

CERTIFICATION PROGRAM TRAINING NETWORK SECURITY I ENDPOINT SECURITY I DATA SECURITY

INTRODUCTION This certification program is offered to our clients and partners in order to guide them through the operation of Stormshield Network Security products. The three certifying courses available cover the large majority of features on our products and allow trainees to set up an effective and legible security policy and to operate our solutions under optimal conditions. Two other certifications are open to distributors who wish to become Stormshield Network Training Centers (SNTC). This document sets out details of these certifications and the courses that enable them to be obtained.

ADMINISTRATOR (CSNA) The aim of this course is to present the range and the basic features of the Next Generation Firewall/UTM product. IT managers, network administrators and IT technicians. Learning objectives At the end of the course, trainees will be: Able to set up the appliance in a network, Introduced to configuration in the most generic case figures, Able to set up an IPSec VPN with pre-shared key authentication. EXPERT (CSNE) The aim of this course is to present the range and the advanced features of the Next Generation Firewall/UTM product. IT managers, network administrators and IT technicians who have obtained the administrator certification. The certification associated with this course is a requirement to have access to the Stormshield Network Technical Assistance Center (TAC). Learning objectives At the end of the course, and after revising basic principles, trainees will be able to: Use the advanced features of the GUI, Accurately configure the intrusion prevention engine (ASQ), Set up a PKI and transparent authentication, Set up a certificate-based IPSec VPN, Create a high availability cluster. PRESENTATION OF CERTIFICATIONS TROUBLESHOOTING & SUPPORT (CSNTS) The aim of this course is to provide tools and methods for gathering information needed for the analysis and correction of problems during production using the CLI (command line interface). IT managers, network administrators and IT technicians who have obtained the expert certification. This course will allow the trainee to master diagnosis and analysis methods in the event unexpected incidents arise. It would also provide an accurate and clear overview of the processes and configuration files that have been implemented. The certification associated with this course is a requirement for partners who wish to become Stormshield Network Support Centers (SNSC). Learning objectives At the end of the course, and after revising basic principles, trainees will be able to: Find out the organization of file systems as well as the daemons and processes on a Stormshield Network appliance, Explore the configuration and diagnose anomalies based on the appliance s logs, Analyze and diagnose a network and routing configuration, Make network captures of traffic and analyze them, Analyze and diagnose network traffic processed by a security policy, Configure and diagnose IPSec VPN policies.

STORMSHIELD NETWORK SECURITY CERTIFICATION COURSE Target certification CSNA CSNE CSNTS No certification CSNA course CSNE course CSNTS course CNA v9 / ACSE v5 or v6 / Network security expert CSNA recert kit CSNE course CSNTS course CNE v9 CSNA recert kit CSNE recert kit CSNTS course CNEP v9 CSNA recert kit CSNE recert kit CSNTS recert kit Certification successful ( 70% of correct answers in the exam) Certification failed (<70% of correct answers in the exam) The recert kits contain: Courseware for the relevant certification in electronic format Two attempts at the relevant certification In the event a candidate fails both attempts at obtaining certification in a recert kit, he will need to register for a full course in order to take the exam again. Network security expert Holders of expert certification for network security products from competitors of Stormshield Network Security are eligible for a CSNA recert kit. A copy of the valid certification must be submitted in order to access this course. Certification CSNA, CSNE and CSNTS certifications are valid for 3 years from the date on which the candidate successfully completed the certification examination. At the end of these 3 years, any partnership and support agreements that may be related to these certifications will be systematically reevaluated. It is therefore recommended that you anticipate a recertification after 2 years to be able to maintain these various advantages. In order for certification to be maintained for 3 years, the holder of the certification undertakes to regularly sign up for and participate in webinars that the Stormshield Network training and support departments invite him to attend. Partner program and Support Chart are linked to the Stormshield Network certification program. These documents are available on our web sites (www.stormshield.eu and mystormshield.eu).

PRESENTATION OF INSTRUCTOR CERTIFICATIONS ADMINISTRATOR INSTRUCTOR (CSNAI) The aim of this exam is to confirm that the candidate has mastered the practical exercises in the CSNA course to the extent he is able to understand and correct errors that trainees may make during this course. Candidates who succeed in this exam would be able to conduct CSNA courses. Network administrators and IT technicians who have succeeded in the administration and expert exams with a score exceeding 80%. This exam is a requirement for partners who wish to become Stormshield Network Training Centers (SNTC). EXPERT INSTRUCTOR (CSNEI) The aim of this exam is to confirm that the candidate has mastered the practical exercises in the CSNE course to the extent he is able to understand and correct errors that trainees may make during this course. Candidates who succeed in this exam would be able to conduct CSNE courses. Network administrators and IT technicians who have succeeded in both the CSNTS and CSNAI exams. This exam is a requirement for partners who wish to become Stormshield Network Training Centers (SNTC). STORMSHIELD NETWORK SECURITY INSTRUCTOR CERTIFICATION COURSE Instructor courses are open to candidates who have already obtained certain certifications on Stormshield Network products. Target certification CSNAI CSNEI Requirements 80% score in CSNA 80% score in CSNE CSNTS CSNAI No instructor certification CSNAI session CSNEI session CNAI v9 CSNAI recert CSNEI session CNEI v9 CSNAI recert CSNEI recert Certification successful ( 70% of correct answers in the exam) Certification failed (<70% of correct answers in the exam) The CSNAI and CSNEI recert are specific exams conducted over half a day with Stormshield Network instructors. They cover the features that were not touched on during the CNAI and CNEI exams. As no courseware will be provided, participants must first familiarize themselves with the new features on Stormshield Network products before attending the training session. CSNAI and CSNEI certifications are valid for 3 years from the date on which the candidate successfully completed the certification examination. At the end of these 3 years, any partnership and support agreements that may be related to these certifications will be systematically reevaluated. It is therefore recommended that you anticipate a recertification after 2 years to be able to maintain these various advantages. In order for certification to be maintained for 3 years, the holder of the certification undertakes to regularly sign up for and participate in webinars that the Stormshield Network training and support departments invite him to attend.

Arkoon and Netasq, fully owned subsidiaries of Airbus Defence and Space CyberSecurity, run the Stormshield brand and offer innovative end-to-end security solutions both in France and worldwide to protect networks (Stormshield Network Security), workstations (Stormshield Endpoint Security) and data (Stormshield Data Security). WWW.STORMSHIELD.EU