COLOUR SYNERGY NIMLOK PORTABLES
Banners Pop Ups and Display Walls Outdoor Products Literature Holders Counters and Portable Furniture Sign and Display Accessories This is an interactive PDF. To access the product information, please click on the product name under the menu; click (on the bottom right corner of each page) to return to the menu. Contents
Banners Pop Ups and Display Walls Outdoor Products Literature Holders Counters and Portable Furniture Sign and Display Accessories Retractable Banners Tension Banners Outdoor Banners Rigid Banners Euro Euro 2 Future Mini Roll Ups Retracta Retracta 2 Roll Up Roll Up 2 Spennare Tall Roll Up Dash Mega Lightning Pegasus Sign Up Vortex Alpine Blizzard Brute Hydro 2 Storm Pro A Frame Brute SLK-10 Wing Banners
Banners Pop Ups and Display Walls Outdoor Products Literature Holders Counters and Portable Furniture Sign and Display Accessories Pop Ups Pop Up Classic Pop Up Magnetic Fabric Pop Ups Compact Image Portable Walls Aero Pegasus Wave Units Pop Ups and Display Walls
Banners Pop Ups and Display Walls Outdoor Products Literature Holders Counters and Portable Furniture Sign and Display Accessories Banners Alpine Blizzard Brute Hydro 2 Storm Pro Flags Wind Dancer Sign Boards A Frame Brute Whirlwind Outdoor Products
Banners Pop Ups and Display Walls Outdoor Products Literature Holders Counters and Portable Furniture Sign and Display Accessories Collapsible Brochure Holder Cascade D10 Illusion Jazz Zed Up 6 Zed Up Lite Literature Holders
Banners Pop Ups and Display Walls Outdoor Products Literature Holders Counters and Portable Furniture Sign and Display Accessories Counters Campaign Fabric Pop Up Counter Pop Up Counter Aero Counter Plinths and Dispalys Pirouet Counters and Portable Furniture
Banners Pop Ups and Display Walls Outdoor Products Literature Holders Counters and Portable Furniture Sign and Display Accessories Sign and display Rigid Banners A Frame Brute SLK-10 Whirlwind Wing Cable Display Systems Cable Display Systems Stand Offs Stand Offs Accessories Cases and Bags Cases and Bags Lights Lights Accessories + Sign and Display
Euro Code: RE 600/800/1000 This smart roller banner is styled on a highly popular base profile, with a substantial anodised silver casing it provides the perfect combination of design with stability. The spring loaded rail clamp system and slide on/off applicator makes it easy to apply or change your graphic. Stylish lightweight components Ideal for point of sale, retail or exhibition environments Choice of 600mm, 800mm or 1000mm widths Available in anodised silver Quick to assemble and easy to use Includes quality foam padded carry bag Additional Info Hardware Dimensions (mm): W600 x H1800 x D180 W800 x H2200 x D180 W1000 x H2200 x D180 Weight: 4.4kg approx (including carry bag) Visible Graphic Dimensions (mm): W590 x H1770 W790 x H2120 W990 x H2120 Substrate: Add 200mm to base of graphic to allow for roller mechanism. Recommended material thickness 0.225-0.3 mm Included in kit: Top rail, base, bungee pole set and carry bag Availability: Anodised silver
Euro 2 Code: RE2-1000 This smart roller banner is styled on a highly popular base profile, with a substantial anodised silver casing it provides the perfect combination of design with stability. The spring loaded rail clamp system and slide on/off applicator makes it easy to apply or change your graphic. Stylish lightweight components Can be used as single or double sided Wide base for extra stability Available in anodised silver Quick to assemble and easy to use Includes quality foam padded carry bag 990mm 2120mm 200mm Graphic dimensions (all dimensions are approx) Additional Info Hardware Dimensions (mm): W1000 x H2200 x D245 Weight: 6kg approx (including carry bag) Visible Graphic Dimensions (mm): W990 x H2120 Substrate: Add 200mm to base of graphic to allow for roller mechanism. Recommended material thickness 0.225-0.3 Microns Included in kit: Top grip rail x 2, base, bungee pole set and carry bag Availability: Anodised silver
Future Code: RFRBL Cartridge Code: RFRC Stylish single-sided cassette banner offering a fast and easy solution for point-of-purchase applications. Interchangeable Cartridge System Accessories available Capable of adding brochure holders & displays Complete range of accessories. Removable graphic cassette. CARTRIDGE Additional Info Hardware Dimensions (mm): W885 x H2210 x D240 Weight: 7.8kg approx (including carry bag) Visible Graphic Dimensions (mm): W840 x H2150 Included in kit: Top rail, base, bungee pole and carry bag Availability: Aluminum Silver
Roll Up Code: RU 600/850/1000/1200/1500 Roll Up uses a single roller mechanism, storing and protecting your graphic in its base for perfect instant presentations time after time. The lightweight display is ideal for promotional messages and Point of Sale displays. Lightweight Single graphic Easy to carry Instant presentations Easy to change graphics Assembled dimensions (mm): RU850: W860 x H2200 x D255 RU1000: W1010 x H2200 x D255 RU1200: W1210 x H2200 x D255 RU1500: W1510 x H2200 x D255 Visible graphic dimensions (mm): RU850: W840 x H2150 RU1000: W990 x H2150 RU1200: W1190 x H2150 RU1500: W1490 x H2150 Additional Info Included in kit: Base, support pole and carry bag. Availability: Black colour-coated aluminium base silver aluminium support pole. Weight: 5.8 kg approx
Roll Up 2 Code: RU2/2S RU2/2L Roll Up2 utilises two independent rollers, providing two surfaces to present your message - use singly or together to create double the effect. Because Roll Up2 is lightweight, self-contained and incredibly portable, you can put it up in seconds - anytime, anywhere! Roll Up2 is ideal for promotional messages, point of purchase displays and instant presentations. Double sided Heavier, more stable base Assembled dimensions (mm): RU2-850: W860 x H2200 x D300 RU2-1200: W1210 x H2200 x D300 Visible graphic dimensions (mm): RU2-850: W840 x H2150 RU2-1200: W1190 x H2150 Additional Info Included in kit: Base, support pole and carry bag. Availability: Black colour-coated aluminium base silver aluminium support pole. Weight: 10 kg approx
Retracta Code: RET850/1000 Budget single sided retractable banner, limited 12 months guarantee. Graphic Application 1 2 Remove paper back ing from the tape on the graphic rail. Hover top of the graphic over the graphic rail to line up the graphic and graphic rail. (back of graphic attaches to graphic rail) 3 4 Remove paper backing from the tape on the leader strip. Attach the bottom of the graphic to the leader strip (back of graphic attaches to leader strip.) Max height (mm): 2127 approx Base footprint dimensions (mm): W850 / 1000 x D368 approx Visible graphic dimensions (mm): W840 / 990 x H1990 5 6 Weight: 3 kg approx With a firm secure hold on the graphic remove graph ic roller pin. Slowly retract graphic into the unit making sure it is straight.
Retracta 2 Code: RET2-850 Give your promotion maximum impact with this stylish and eye-catching double-sided banner system. extremely quick to put up and easy to use, this banner system is ideal for any exhibition environment. Available in 1 different sizes Twist out stabilising foot for extra stability Adhesive rail for easy & secure graphic fixing Very cost effective Anodised silver Includes quality foam padded carry bag Quick to assemble and easy to use 850mm 2000mm 200mm Graphic dimensions are approximate Additional Info Assembled dimensions (mm): W850 x H2120 x D600 approx Weight: 5.5kg approx Visible graphic dimensions: W850 x H2000 Substrate: Add 200mm to graphic length to allow for roller. Material thickness between 225 and 300 microns. Included in kit: Carry bag, bungee pole set, base 2 x top rails Packaging: Bag dimensions: W900 x H120 x D190 Carton dimensions: W920 x H300 x D220
Spennare Code: RU850-Spen A light and smart design that lets the message speak for itself. Probably the most graceful and convenient retractable banner system on the market! Spennare has a well defined and discreet design that lets the message speak for itself. Enjoy low weight, high quality and great usability. The foot is discreet and the cassette, which protects the message when not in use, is compact. Additional Info Assembled dimensions (mm): W860 x H2130 x D285 approx Base footprint dimensions (mm): W860 x D285 approx Weight: 4kg approx Visible graphic dimensions (mm): W850 x H2100 approx Included in kit: Base, support arms and carry bag. Availability: Silver
Mini Roll Ups Code: RUmini Mini Roll Up A4 Mini Roll Up A3 Size Additional Info A4 Assembled dimensions (mm): W235 x H330 x D65 Base footprint dimensions (mm): W235 x D65 Weight: 0.4kg approx Visible graphic dimensions (mm): W210 x H297 Included in kit: Base and support arm. A3 Assembled dimensions (mm): W325 x H450 x D78 Base footprint dimensions (mm): W325 x D78 Weight: 0.6kg approx Visible graphic dimensions (mm): W297 x H400 Included in kit: Base and support arm.
Tall Roll Up Code: RU-Tall Assembly Instructions 1 2 Hold the Top rail whilst lowering the banner (DO NOT DROP) to prevent damage to the graphic 3 4 Note: Opening the banner stand base may invalidate the product warranty 5 6 7 8 Additional Info Assembled dimensions (mm): W1250 x H3100 x D325 approx Max/Min Height: 3100/1845 approx Base footprint dimensions (mm): W1250 x D325 Weight (kg): 17.8kg approx Visible graphic dimensions (mm): W995 x H1725-3000 (Adjustable Height) Included in kit: Base, support arm and carry bag. Availability: Anodised silver
Dash Mega Code: SUdashS / SUdashL A highly portable, versatile and cost effective telescopic tripod banner stand that is lightweight, very stable and simple to use. The telescopic support pole enables the user to vary the height of the graphic up to a maximum of 2.4 metres. 2 Lightweight anodised silver components Wide base tripod foot 3 part telescopic pole for adjustable graphic height Quick to assemble and easy to use Includes Carry bag/tube Twin Dash Mega (requiers extra set of rails) Additional Info Hardware Dimensions (mm) W800 x H2610 (max) approx. Footprint 710 x 630 approx. Weight: 3kg approx (including carry bag/tube) Maximum Graphic Dimensions (mm): W800 x H2400 (max) (Adjustable Height) Note: 15mm of graphic height is lost inside each rail. NB Typical graphic size: W800 x H2000 Substrate: Between 0.225 & 0.3 mm Included in kit: 2 x graphic rails, 1 x telescopic pole set, 2 x additional sliders for thicker graphics and Carry bag/tube.
Lightning Code: SUL800/1000 A highly portable and cost effective tension banner stand that is lightweight, very stable and simple to use. Available in 2 widths: 800 and 1000mm Quick to assemble and easy to use Lightweight aluminium components Snap frame rails enable easy graphic changes Bungee pole provides consistant graphic height Includes carry bag Available in anodised silver Hardware Dimensions (mm) W805 x H2070 x D510 approx (based upon 800mm wide unit) W1005 x H2070 x D510 approx (based upon 1000mm wide unit) Weight: 2.75kg approx including carry bag (based upon 800mm wide unit) Visible Graphic Dimensions (mm): W800-1000 x H1985 Actual Graphic Dimensions (mm): W800-1000 x H2000 Additional Info Included in kit: Carry bag, top rail, bottom rail / stabilising foot and bungee pole Availability: Anodised silver Graphic substrate: Recommended material thickness between 0.225-0.3 mm
Pegasus Code: SU-PEGASUS Telescopic pole with adjustable height and width Lightweight components Breaks down easily for transportation Cost effective Silver powdercoated finish Assembled dimensions (mm) W1450-2420 x H960-2400 x D430 (Adjustable height and width) Weight: 6.8kg including bag Maximum Visible Graphic Dimensions (mm): W2300 x H2300 Minimum Visible Graphic Dimensions (mm): W1330 x H860 Maximum Looped Graphic Dimensions (mm): W2300 x H4660 Recommended extra material for loop: 140mm approx top and bottom i.e 280mm approx overall (70mm loops) Additional Info Substrate: Ideal for fabric graphics Availability: Silver powdercoated, complete with carry bag Horizontal poles are 19mm approx in diameter Vertical poles are 21mm approx in diameter E&OE.
Sign Up Code: SU850/1200 This single sided banner system is free standing, sturdy, and ultra-lightweight, making it ideal for instant presentations. Complete with a graphic, it fits into its own carry bag. Optional halogen lights (L10, L5 and Skinny) Custom Width Units Available Assembled dimensions (mm): W850 x H2175 approx Custom width units available Weight: 4.5kg including unit, graphic and bag. Visible graphic dimensions(mm): W845 x H2150 Additional Info Bag: Black nylon bag with strap 880mm x 230mm x 90mm
Vortex Code: S-Vortex An highly portable X style tension bannerstand capable of displaying an 1800mm x 800mm graphic. Lightweight components Quick to assemble and easy to use Graphics are supported on a simple eyelet system Includes quality carry bag 800mm 1800mm Position eyelet centres 20mm in from each graphic corner Graphic dimension and eyelet positioning (All dimensions are approx) Additional Info Assembled Dimensions (mm): W855 x H1950 x D950 approx Footprint Dimensions (mm): W855 x D950 approx Weight: 1.5kg approx (including carry bag) Visible Graphic Dimensions (mm): W800 x H1800 Substrate: Reccomended material thickness 0.225-0.3 mm Graphic requires 4 off 13mm eyelets 11.5mm recommended minimum internal eyelet diameter Availablity: Anodised silver / black fittings
Alpine Code: YC-12 Alpine is the biggest graphic carrier in the range with a graphic area of up to 6m 2 single or double sided. It s the ideal promotional solution for outdoor events, advertisements, exhibitions and public areas such as airports and shopping malls. Several units can be linked together as a seamless wall to make an even bigger impact. Indoor or outdoor, single or double sided banner system Telescopic pole for adjustable graphic height up to a maximum of 2400mm approx 2500mm approx graphic width Individual units can be joined together Hollow feet for water or sand weighting for total stability Quick to assemble Additional Info Hardware Dimensions (mm): Maximum overall height of unit: 3000 approx Base tank dimensions: 800 x 240 approx Weight: 13.4kg approx Weight does not include graphics or transit packaging Each base tank holds 28 Litres approx of water Graphic Dimensions (mm): W2500 x H1500-2400 Substrate: Lightweight outdoor banner material (solid or mesh type substrates) and or dye sublimated fabrics Graphic requires 20 off eyelets 9.5mm recommended internal eyelet diameter For more details please see back page Availability: Aluminium and moulded grey plastic base Accessories: To create a seamless wall of graphics, complete sets need to be purchased.
Blizzard Code: YC-5 Specifically designed for indoor and outdoor promotions or high traffic areas of display. Blizzard s moulded base can be filled with either water or sand to provide stablilty in adverse weather conditions. Ideal for point of sale, retail display or exhibition environments Stylish design hollotw plastic base for water or sand weighting agent Fully adjustable graphic height and width Graphic supported on simple eyelet system Weather resistant Adjustable width (600-800) & height (1500-2000) Assembled dimensions (mm): W800 x H2100 x D540 approx (based upon 800 x 2000 graphic) Base footprint dimensions (mm): W540 x D455 x H186 approx Weight: 3.2kg approx when empty 19.6kg approx when filled with water (requires 21 litres approx) Recommended Graphic Dimensions: W800 x H2000 mm Maximum Graphic Dimensions: W800 x H2000 mm Minimum Graphic Dimensions: W600 x H1500 mm Substrate: Lightweight outdoor banner material (solid or mesh type substrates) Graphic requires 4 off 13mm eyelets 11.5mm recommended minimum internal eyelet diameter Additional Info Included in kit: Base, telescopic pole /support arms and bottom rail. Availability: Anodised silver pole and blue base Optional accessories: Carry bag with/without shoulder straps (W550 x H460 x D200 mm)
Brute This outdoor graphic holder is as versatile as it is functional. Use one to hold a smaller graphic, or as many as you need to hold a large graphic. The secure grip allows for use outdoors in the elements, as well as inside. Quick to set up Easy to store and ship Fill with water or sand Works with a variety of graphic substrates 100% of the water/sand will come out after use Quick ship Side View ASSEMBLY solid steel stake holds secure fits up to 13mm thick substrate attractive rounded design organic rock texture solid polycarbonite construction Bottom View contoured base sits stable on uneven terrain weights 9 kg when filled with water base holds 1.2 liters of water or sand 100% of the water/sand empties for storage Additional Info Base footprint dimensions (mm): W228 x H152 x D355 approx Weight: 10kg approx when filled with water Graphic dimensions: Height: Max heigh determined by substrate and wind conditions. Up to the discretion of the user. Max Width: 1000mm Recommended substrate: PVC, Foam board, Wood board Substrate thickness: 3-12.7mm Sold in sets of two including: 2 brutes, 2 steel stakes. Shipping weights & dimensions (set of two): 330 x 368 x 241 mm 4.22kg Accessories: Lights can be clamped on the top of a PVC or wood baord graphic indoors only Tool needed for assembly: hammer / mallet
Hydro 2 Code: YC-7 Hydro 2 is built for durability and strength and is ideal for indoor or outdoor promotions. The moulded base can be filled with either water or sand, making it especially suitable for high traffic areas indoors or poor weather conditions outdoors. Suitable for or indoor or outdoor use Can be used as a double or single sided unit Ideal for point of sale, retail display or exhibitions Moulded plastic base for water or sand weighting Supported on a simple eyelet system Weather resistant Supplied with carry bag Designed to withstand approximate wind speeds of 20-30 km/h (Beaufort scale 4) 800mm 1800mm Position eyelet centres 19mm in from each graphic corner Graphic dimensions and eyelet positioning (dimensions shown are approx) Additional Info Assembled dimensions (mm): W813 x H2235 x D533 approx Base footprint dimensions (mm): W394 x D533 approx Weight: 7.7kg approx when empty 20.6kg approx when filled with water Visible graphic dimensions: W800 x H1800 Recommended graphic substrate: Lightweight outdoor textiles (solid or mesh type substrates) Eyelets: Graphic requires 4 off eyelets with a 10.5mm minimum internal eyelet diameter See above diagram for eyelet positioning Included in kit: Base, support arms and carry bag. Availability: Dark Grey base, mid grey support arms
Storm Pro Code: YC-9 Storm Pro is ideal for outdoor or indoor displays, the new style unit features a double pole graphic support and snap frame rails for easy fitting. The central hub allows graphics to be rotated so that graphics can be displayed in portrait or landscape format and the telescopic pole allows adjustment of the height of the graphic. Single sided banner Fixed graphic size 1610mm (h) x 600mm (w) approx Heavy duty construction with extending stabiliser feet for strength and stability Indexed telescopic pole for adjustable overall unit height Graphics can be rotated every 15 degrees, for landscape or portrait display Hollow plastic base for water weighting Storm Pro Landscape Rotating Central Hub Graphics can be rotated every 15 degrees for landscape or portrait format Additional Info Hardware Dimensions (mm): Footprint diameter: 750 approx Min o/all height: 1856 approx (portrait graphic) Min o/all height: 1326 approx (landscape graphic) Max o/all height: 2560 approx (portrait graphic) Min o/all height: 2055 approx (landscape graphic) Recommended Graphic Dimensions (mm): W600 x H1610 Recommended Substrate: Lightweight outdoor banner material (solid or mesh type substrates) Weight: 3.25kg approx 19kg approx when filled with water (Water tank holds 15.5 litres of water approx)
Wing Code: Zv350/500 Size (mm) Packing Rate G.W (kg) N.W (kg) Wing 350 4 pcs/ctn 17.5 15.5 Volume (m ) 0.089 Wing 500 4 pcs/ctn 23 20 0.125
Pop Up Classic (Curved) Code: CC13C/CC23C/ CC33C POPUP 3 x 3 Curved Compact pop-up displays provide maximum portability. The lightweight framepops up in seconds to form a sturdy support for graphic or fabric panels. A standard 3 x 3 display complete with panels, lights and case-to-counter conversion kit packs easily into a single wheeled case. The top of the case can be used as a step stool for attaching lights, and both straight and curved frames are easily integrated together into one display creating endless design possibilities. Compact pop-up displays come with a lifetime guarantee. Lightweight, portable Full range of accessories including lights, shelves and Wheeled case, which converts into a counter. Available in a combination of quads from 1 x 1 desktop to 5 x 5 freestanding exhibition display Available in different combinations 947 3074 3x3 Curved 4x3 Curved Code: CK6 4X3 Curved x2 Weight: 59.8 kg Dimension: W5660 x H2226 mm Code: CK9 3X3 Curved x2, 1x3 Straight x 1 Weight: 92 kg Dimension: W5500 x H2226 x D2000 mm
Pop Up Classic (Curved) POP UP Variations 3 x 4 - Curved 3 x 3 - Curved Single Sided - 21 mag bars, 4 front curved and 2 D-end hangers Single Sided - 18 mag bars, 3 front curved and 2 D-end hangers Double Sided - 30 mag bars, 4 front curved, 4 rear curved and 2 D-end hangers Double Sided - 24 mag bars, 3 front curved, 3 rear curved and 2 D-end hangers 3 x 2 - Curved Single Sided - 15 mag bars, 2 front curved and 2 D-end hangers 3 x 1 - Curved Single Sided - 12 mag bars, 1 front curved and 2 D-end hangers Double Sided - 18 mag bars, 2 front curved, 2 rear curved and 2 D-end hangers Double Sided - 12 mag bars, 1 front curved, 1 rear curved and 2 D-end hangers 3 x 4 - Straight Single Sided - 21 mag bars, 4 straight hangers or 8 horizontal mag bars and 2 D-end hangers 3 x 3 - Straight Single Sided - 18 mag bars, 3 straight hangers or 6 horizontal mag bars and 2 D- end hangers Double Sided - 30 mag bars, 8 straight hangers or 16 horizontal mag bars and 2 D-end hangers Double Sided - 24 mag bars, 6 straight hangers or 12 horizontal mag bars and 2 D- end hangers 3 x 2 - Straight Single Sided - 15 mag bars, 2 straight hangers or 4 horizontal mag bars and 2 D- end hangers 3 x 1 - Straight Single Sided - 12 mag bars, 1 straight hanger or 2 horizontal mag bars and 2 D- end hangers Double Sided - 18 mag bars, 4 straight hangers or 8 horizontal mag bars and 2 D- end hangers Double Sided - 12 mag bars, 2 straight hangers or 4 horizontal mag bars and 2 D- end hangers All dimensions are approx and are in mm
Pop Up Classic (Straight) Code: CS33C Compact pop-up displays provide maximum portability. The lightweight framepops up in seconds to form a sturdy support for graphic or fabric panels. A standard 3 x 3 display complete with panels, lights and case-to-counter conversion kit packs easily into a single wheeled case. The top of the case can be used as a step stool for attaching lights, and both straight and curved frames are easily integrated together into one display creating endless design possibilities. Compact pop-up displays come with a lifetime guarantee. Hardware dimensions Lightweight, portable Full range of accessories including lights, shelves and wheeled case, which converts into a counter. Available in a combination of quads from 1 x 1 desktop to 5 x 5 freestanding exhibition display 4398mm POPUP 4 x 3 Straight
Pop Up Classic (Straight) POP UP Variations 3 x 4 - Curved 3 x 3 - Curved Single Sided - 21 mag bars, 4 front curved and 2 D-end hangers Single Sided - 18 mag bars, 3 front curved and 2 D-end hangers Double Sided - 30 mag bars, 4 front curved, 4 rear curved and 2 D-end hangers Double Sided - 24 mag bars, 3 front curved, 3 rear curved and 2 D-end hangers 3 x 2 - Curved Single Sided - 15 mag bars, 2 front curved and 2 D-end hangers 3 x 1 - Curved Single Sided - 12 mag bars, 1 front curved and 2 D-end hangers Double Sided - 18 mag bars, 2 front curved, 2 rear curved and 2 D-end hangers Double Sided - 12 mag bars, 1 front curved, 1 rear curved and 2 D-end hangers 3 x 4 - Straight Single Sided - 21 mag bars, 4 straight hangers or 8 horizontal mag bars and 2 D-end hangers 3 x 3 - Straight Single Sided - 18 mag bars, 3 straight hangers or 6 horizontal mag bars and 2 D- end hangers Double Sided - 30 mag bars, 8 straight hangers or 16 horizontal mag bars and 2 D-end hangers Double Sided - 24 mag bars, 6 straight hangers or 12 horizontal mag bars and 2 D- end hangers 3 x 2 - Straight Single Sided - 15 mag bars, 2 straight hangers or 4 horizontal mag bars and 2 D- end hangers 3 x 1 - Straight Single Sided - 12 mag bars, 1 straight hanger or 2 horizontal mag bars and 2 D- end hangers Double Sided - 18 mag bars, 4 straight hangers or 8 horizontal mag bars and 2 D- end hangers Double Sided - 12 mag bars, 2 straight hangers or 4 horizontal mag bars and 2 D- end hangers All dimensions are approx and are in mm
Pop Up Magnetic Code: CE13C/CE23C/CE13C POPUP 3 x 3 Curved Fully magnetic, with silver anodised aluminium frame and saffron components, Pop Up is stylish and very simple to use. Self-locating hanging system with original hangers make it the simplest pop-up to assemble Self-locating smart magnetic locking arms and low profile mag bars Quality anodised aluminium finish Option for graphics to be displayed on both sides All front curve panels are the same size Available in a combination of quads from 1 x 1 desktop to 5 x 5 freestanding exhibition display Available as frame only, graphic hanging kit or fabric panel kit Available in different combinations 947 3074 3x3 Curved 4x3 Curved Code: CK6 4X3 Curved x2 Weight: 59.8 kg Dimension: W5660 x H2226 mm Code: CK9 3X3 Curved x2, 1x3 Straight x 1 Weight: 92 kg Dimension: W5500 x H2226 x D2000 mm
Pop Up Magnetic POP UP Variations 3 x 4 - Curved 3 x 3 - Curved Single Sided - 21 mag bars, 4 front curved and 2 D-end hangers Single Sided - 18 mag bars, 3 front curved and 2 D-end hangers Double Sided - 30 mag bars, 4 front curved, 4 rear curved and 2 D-end hangers Double Sided - 24 mag bars, 3 front curved, 3 rear curved and 2 D-end hangers 3 x 2 - Curved Single Sided - 15 mag bars, 2 front curved and 2 D-end hangers 3 x 1 - Curved Single Sided - 12 mag bars, 1 front curved and 2 D-end hangers Double Sided - 18 mag bars, 2 front curved, 2 rear curved and 2 D-end hangers Double Sided - 12 mag bars, 1 front curved, 1 rear curved and 2 D-end hangers 3 x 4 - Straight Single Sided - 21 mag bars, 4 straight hangers or 8 horizontal mag bars and 2 D-end hangers 3 x 3 - Straight Single Sided - 18 mag bars, 3 straight hangers or 6 horizontal mag bars and 2 D- end hangers Double Sided - 30 mag bars, 8 straight hangers or 16 horizontal mag bars and 2 D-end hangers Double Sided - 24 mag bars, 6 straight hangers or 12 horizontal mag bars and 2 D- end hangers 3 x 2 - Straight Single Sided - 15 mag bars, 2 straight hangers or 4 horizontal mag bars and 2 D- end hangers 3 x 1 - Straight Single Sided - 12 mag bars, 1 straight hanger or 2 horizontal mag bars and 2 D- end hangers Double Sided - 18 mag bars, 4 straight hangers or 8 horizontal mag bars and 2 D- end hangers Double Sided - 12 mag bars, 2 straight hangers or 4 horizontal mag bars and 2 D- end hangers All dimensions are approx and are in mm
Compact Image Code: CI13C/CI23C/CI13C Tension fabric systems are the next generation in large format graphic displays. Comapct Image is portable and easy to set-up, offering maximum impact with minimal fuss! Suitable for indoor use Available in different combinations Fabric graphic remains attached to the expanding frame Quality anodised frame Very fast assembly Optional wheeled carry bag and stabilising feet are available Optional lighting accessories 2 x 3 Compact Image Frame dimensions 2 3 3 3 315 2 x 3 (W1525 x H2260) Overall assembled dimensions (mm): 2 x 3 Straight Compact Image W1525 x H2260 x D315 approx Weight: 5.75kg approx 3 x 3 Straight Compact Image W2260 x H2260 x D315 approx Weight: 7.75kg approx 4 x 3 Straight Compact Image W2990 x H2260 x D315 approx Weight: 10.25kg approx 3 x 3 (W2260 x H2260) Visible graphic dimensions: See Graphic Specification sheet Different combinations available (1x3, 2x3, 3x3, 4x3 etc) All dimensions are in mm and are approximate
Aero Code: Aero_Wall Aero is a smart and extremely versatile modular display system that is very easy to transport and assemble, making it ideal for all types of display application. 1145mm 1620mm 2120mm Banners can be positioned in multiple angles 4430mm (max) Assembled dimensions (approx) The display can be expanded by linking kits together 3 single sided pull-down roller banners mounted onto telescopic support posts and bases (2 banners 1000mm wide, 1 banner 1500mm wide) Choice of 3 fixed visible graphic heights: 1010mm, 1510mm and 2010mm Lightweight anodised aluminium components Supplied complete with two mounting points for spot or floodlighting Banners can be positioned to create a flat back-wall or can be angled to fit a variety of display spaces Aero s modular design makes it easy to expand the display by linking additional kits together Suitable for indoor use only Supplied with carry bags Config A Config B 405 4430 (max) 1565 Recommended configurations (Dimensions are in mm and are approx) 2065 Additional Info Assembled dimensions (mm): Configuration A W4430 x H2120(max) x D405 approx Configuration B W2065 x H2120(max) x D1565 approx Weight: 22kg approx (including carry bags) Visible graphic dimensions (mm): W990 x H1010 approx (short) W990 x H1510 approx (medium) W990 x H2010 approx (tall) W1490 x H1010 approx (short) W1490 x H1510 approx (medium) W1490 x H2010 approx (tall) Note: Add 200mm to top of graphic to allow for the roller mechanism Add 110mm to base of graphic to allow for a folded hem, finished size 55mm Recommended graphic substrate: 0.225 to 0.3 mm thick PVC banner vinyl Included in kit: 2 x 1000mm roller banners 1 x 1500mm roller banner 4 x telescopic posts 4 x circular bases 12 x cassette / rail hangers 6 x Carry bags Availability: Anodised aluminium posts and roller banners inc dark grey mouldings and powdercoated grey steel bases Roller banners: Require tensioning before use (see over)
Wave Curved Optional 50 watt halogen light. Snap button aluminum frame and pillowcase zipper graphic. Wave is a portable, light-weight fabric structure with endless graphic and promotional capabilities. The main unit can be easily assembled without any tools. The tubular aluminum frame assembles in minutes utilizing quick connection snap buttons and durable molded plastic corners. The high resolution dye sublimated fabric graphic slips over the aluminum frame and zips across the bottom to keep it secure. Additional Info Assembled dimensions (mm): W2895 x H2336 Weight: 18.5kg Visible graphic dimensions: W2900 x H2365 Included in kit: Frame and carry bag.
Wave Straight Wave is a portable, light-weight fabric structure with endless graphic and promotional capabilities. The main unit can be easily assembled without any tools. The tubular aluminum frame assembles in minutes utilizing quick connection snap buttons and durable molded plastic corners. The high resolution dye sublimated fabric graphic slips over the aluminum frame and zips across the bottom to keep it secure. Optional 50 watt halogen light. Additional Info Assembled dimensions (mm): W2985 x H2337 Weight: 20kg Visible graphic dimensions: W2900 x H2337 Included in kit: Frame and carry bag. Snap button aluminum frame and pillowcase zipper graphic.
Wind Dancer Code: YC-11 5m high portable flag ideal for indoor or outdoor events, promotions or exhibtions. Max Flag size W1000mm x H3500mm approx Overall height 5300mm max approx Portable and lightweight Unique design allows the flag to rotate when the wind direction changes Telescopic pole allows the flag to be set at Three fixed heights Water filled base aids stability which splits down into four sections for easy carriage Quick to assemble and easy to use 20 3 x 320 pitch 20 20 Recommended Flag dimensions 3500 9 x 384 pitch 13 x Eyelets (9.5 minimum internal dia ) 24 1000 Dimensions shown are to eyelet centres, are in mm and are approximate Additional Info Overall assembled dimensions (mm): Maximum height W1000 x H5300 x D1000 approx Intermediate height W1000 x H4170 x D1000 approx Minimum height W1000 x H2900 x D1000 approx Weight: 10kg approx empty and 76kg approx when filled with water Capacity of base: 66 litres of water approx (16.5 litres per base quadrant) Recommended substrate: Lightweight flag textile Do not use banner vinyl Recommended print process: Dye-sublimation print onto one side of the flag only Maximum flag size (mm): W1000 x H3500 Intermediate flag size (mm): W1000 x H2500 Minimum flag size (mm): W1000 x H1500 Wind Dancer 5m flags are designed to withstand approximate windspeeds of 13 to 18 miles per hour (Beaufort Scale 4)
Whirlwind Code: YWHRL-WND Whirlwind is a heavy-duty double sided swing sign for displaying A1 size posters. The unit has a wheeled compact moulded base that can be filled with water or sand. The snap frame poster holders make changing your message extremely quick and simple. Double sided Easy front loading aluminium snap frames Suitable for indoor or outdoor use Heavy-duty construction Wheeled compact moulded base that can be filled with water or sand Complete with protective graphics covers 1165mm approx Integral wheels make Whirlwind easy to move 500mm approx 780mm approx Additional Info Assembled dimensions: 1165mm (h) x 780mm (w) x 500mm (d) approx Weight: 11kg approx when empty & 36kg approx when filled with water. (capacity 25 litres approx) Maximum Graphic Dimensions: 835mm (h) x 590mm (w) approx Visible Graphic Dimensions: 820mm (h) x 575mm (w) approx Substrate: 1mm thick maximum For outdoor use encapsulate graphic or use suitable outdoor substrates Availability: Aluminium frame with Anodised silver finish and grey moulded base. Note : When moving the unit do not drag the base. Tip unit onto it s wheels and pull or push to move.
SLK-10 Code: ZK-8 Assembled dimensions (mm): W665 x H1155 x D380 approx Visible graphic dimensions (mm): W574 x H777 Base footprint dimensions (mm): W665 x H380 approx Weight: 3kg approx
A Frame Code: Zsyn The A Frame has been specially developed for ease of use using our popular spring loaded Trappa Frame graphic holder. Easy front loading, snap frame Available in A1 portrait format Complete with UPVC protective graphics cover Galvanised steel backing for extra strength and stability 638mm (w) 1060mm (h) 825mm (d) Additional Info Assembled dimensions (mm): W638 x H1060 x D825 Closed dimensions (mm): W638 x H1120 x D60 Weight: 11kg - External A-sign Maximum Graphic Dimensions(mm): W594 x H841 (A1 Portrait) Visible Graphic Dimensions (mm): W584 x H831 Substrate: 1mm thick maximum For External A-sign encapsulate graphic or use suitable substrates for outdoor use Availability: Aluminium frame with Anodised silver finish
Cascade Code: FU-cas A lightweight polymer based literature holder with 4 pockets. Collapsible for easy transportation and supplied with carry bag. Lightweight, polymer construction Versatile one step cantilever assembly action 4 pocket capacity Robust, transparent polycarbonate literature pockets Available in grey Carry bag included Assembly CAUTION: Ensure fingers are kept clear of folding mechanism when opening and closing. 1 2 Remove the folded unit from the carry bag and lift the catch on both sides to loosen the pockets. 3 4 Assembled Dimensions (mm) W265 x H1480 x D310 approx. Closed Dimensions (mm): W265 x H360 x D310 approx. Lift the pockets from the back in an upwards and forwards motion. 5 6 Internal Tray Dimensions (mm): W224 x H330 x D35 approx. Weight: 5.5kg approx including carry bag We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. Stabilise the literature holder during assembly by placing foot on base. Secure into assembled position by locating the catches on both sides of the holder.
D10 Code: FUD10 Curvaceous styling with 10 A4 wire frame pockets Slim and lightweight Available in Sparkling Silver Separates into 3 pieces Carry bag included 10 up deluxe consists of 3 pieces: Top, bottom and base. Assembled dimensions (mm): W300 x H1365 x D360 approx Pocket dimensions (mm): W220 x H297 x D15 approx Recommended carry bag/case size W850 x H340 x D220 approx Weight: 7kg approx Slot the bottom section onto the pegs of the base until fully secure. Slot the top section onto the pegs of the bottom section until fully secure. Availability: In Sparkling Silver We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance.
Illusion Code: FUD4 A versatile cantilever literature stand, collapsible for easy transportation. Ideal for exhibition displays. One step easy cantilever assembly action A4 portrait format 4 Pockets Available in black or silver powdercoated finishes Carry bag included Integral carry handle for easy transportation Handle fits through top of carry bag Adjustable feet Additional Info Assembled dimensions (mm): W370 x H1535 x D300 approx. Pocket dimensions (mm): W240 x H302 x D22 Availability: Black or silver powdercoated finish Closed dimensions (mm): W260 x H495 x D230 approx. Max document dimensions (mm): W232 x H305 Bar position on tray: Weight: 7kg approx (including carry bag) Illusion is suitable for A4 literature 190mm approx
Jazz Code: FUJS/FUJB The clever design of the Jazz accommodates landscape and portrait format literature. It s stylish looks and high quality textured finish make it ideal for retail and showroom displays. Steel components for total stability Ideal for point of sale and retail environments Price competitive Available in black or silver 3 piece construction Quick to assemble and easy to use Includes canvas carry bag 315mm 1355mm 380mm Jazz also available in black Jazz dimensions Additional Info Hardware Dimensions (mm): W315 x H1355 x D380 Weight: 7.5kg approx Pocket Dimesions (mm): W230 x H305 x D21 Included in kit: Canvas bag Availability: Textured black or silver
Zed Up 6 Code: FUD6 A highly functional, double-sided literature holder with 6 pockets. Collapsible for easy transportation and supplied with carry bag. Double-sided unit Collapsible for easy transportation 6 pockets Available in powdercoated black or silver Padded carry bag included Assembly 1 2 Raise the unit by gently lifting the top tray 3 Lift the unit to it s full height 4 Assembled dimensions (mm): Closed dimensions (mm): Internal Tray Dimensions (mm): Weight (kg): W275 x H1540 x D365 approx. W275 x H195 x D365 approx. W230 x H310 x D25 approx. 8.5kg approx including carry bag Locate both tray supports into the base cutouts Rotate locking tab over the horizontal bar to lock the base into place To close: 1. Rotate the locking tab back to the open position 2. Raise the unit until the tray supports are clear of the base and then lower the unit into the closed position CAUTION: Ensure fingers are kept clear of folding mechanism when opening and closing.
Zed Up Lite Code: FUF6S/ FUF6L Zed-up Lite is a popular literature stand, that is stylish and highly portable. Ideal for exhibitions and displays. High tech styling Double-sided acrylic shelves Heavy duty lockable carry case included Collapsible Available in anodised silver 2 models to suit A3 and A4 literature Acrylic tray section 7.5mm deep 23mm lip A3 Assembled dimensions (mm): A3 Zed-Up Lite W470 x H1420 x D370 A4 Zed-Up Lite W256 x H1460 x D370 Closed dimensions (mm): W471 x H110 x D400 W256 x H110 x D400 Overall tray dimensions (mm): W465 x H320 W255 x H320 Acrylic tray section dimensions (mm): Weight (kg): W437 x H305 11kg approx W220 x H305 7.5 kg approx All dimensions shown are approx.
Campaign Code: Zcam An extremely cost effective demonstrator unit that is lightweight, portable and simple to assemble. Apply your promotional graphics as vinyls or screen print directly onto the plastic base wrap. Lightweight plastic, flat pack promotional unit Extremely cost effective Includes rigid header panel, shelf and twin supporting poles Supplied with carry bag 780mm 300mm 410mm 2120mm 855mm 820mm back view indicating internal shelving unit dimensions (all approx) Additional Info Hardware Dimensions (mm) W820 x H2120 x D410 approx. Base Dimensions (mm): W820 x H855 x D410 approx. Weight: 8.7kg approx (inc carry bag) Recommended graphic dimensions for front of base (mm): W810 x H760 Header dimensions (mm): W780 x H300 approx. Graphics may be screen printed directly onto the base wrap. Self adhesive vinyl graphics may also be mounted onto the base wrap and header.
Tornado The Tornado is an ideal counter for both indoor&outdoor promotional use, with a hollow moulded top and base making it very light and easy to transport. Suitable for both indoor and outdoor use Weatherproof, robust and durable PVC tambour wrap included 2 carry bags included 1500mm 927mm Graphic wrap dimensions Additional Info Assembled dimensions (mm) W850 x H1010 x D500 approx. PVC wrap dimensions (mm): W1500 x H962 Weight: 9kg approx Graphic wrap dimensions (mm): W1500 x H927 approx. Viewable dimensions (mm): (when viewed from front of counter) W760 x H927 approx. Included in kit: 2 x poles, 6 x screw sets, 2 x shelf shim, 1 x PVC tambour wrap, 1 x shelf, 1 x top, 1 x base, 2 carry bags.
Pop Up Counter Code: COCstandard Ideal for greeting counter, workstation or product display unit. Easy to transport and quick to assemble No tools required Quality aluminium frame Table top available in 3 different colours: white, timber grain and brown Hardware Dimensions Assembled dimensions (mm): W1275 x H980 x D440 approx Visible graphic dimensions: W1035 x H935 440mm 1275mm 365mm Base footprint dimensions (mm): W1275 x H440 approx Weight: 6.5kg approx
Pirouet Code: ZP-Plinth The easiest, most complete portable kiosk for any environment. Collapsable, aluminum European designed frame features changeable full color graphics, a unique lighting scheme, mirrored shelves, and much more. Easily transports to trade shows, meetings, sales events, and retail environments. No tool assembly Compact Portable roll away or shoulder bag packaging Snap-in graphic panels Pre-wired down lights (for PR 80 only) Five kit options An easy add-on to existing displays PR80 PR40 PR40 Assembled dimensions (mm): W605 x H1050 x D605 approx Graphic dimensions (mm): W388 x H495 x 8 approx Additional Info Standard Kit Includes: 1 Pirouet Frame 2 White Shelves with Two lights 8 White or Graphic Panels 8 Clear Panels 1 Wheeled Carry Bag PR80 Assembled dimensions (mm): W530 x H2035 x D530 approx Graphic dimensions (mm): W388 x H495 x 8 approx Standard Kit Includes: 1 Pirouet Counter with integrated silver top 2 White Shelves 8 White or Graphic Panels 1 Carry Bag with shoulder strap
Fabric PopUp Counter Code: COCfabric Tension fabric systems are the next generation in graphic displays. Fabric pop up counter is portable and easy to set-up, offering maximum impact with minimal fuss! Lightweight and portable Easy to fasten graphics using velcro High quality anodised frame Very fast assembly Graphic Dimensions 1000mm 998mm VISIBLE AREA 1735mm Assembled dimensions (mm): W1060 x H1015 x D400 approx Visible graphic dimensions (mm): W1000 x H998 Base footprint dimensions (mm): W1060 x H400 approx Weight: 5.5kg approx
Cable Display Systems 7mm Multi-angle Panel Support PO114 Orbita Panel support ideal for suspending signage from ceilings Multi-angle fixing 16mm dia x 30mm Suitable for substrates up to 7mm thick Quality aluminium components Available in silver satin finish Requires 1.5mm and 2.5mm Allen keys (not supplied) 4mm Double-sided Panel Support PO122 Double-sided panel support for Strata cable kits 10mm dia x 20mm Suitable for substrates up to 4mm thick Allows cables to be shared Quality aluminium components Available in silver satin finish Requires 2mm Allen key (not supplied) 4mm Panel Support PO113 Single panel support for Strata cable kits 10mm dia x 15.5mm Suitable for substrates up to 4mm thick Quality aluminium components Available in silver satin finish Requires 2mm Allen key (not supplied) 7mm Double-sided Panel Support PO121 Double-sided panel support for Strata cable kits 16 dia x 43 mm for substrates up to 7mm thick Rotating feature Allows cables to be shared Quality aluminium components Available in silver satin finish Requires 1.5 & 2.5mm Allen keys (not supplied) 7mm Panel Support PO112 Single panel support for Strata cable kits 16 dia x 20.5 mm for substrates up to 7mm thick Quality aluminium components Available in silver satin finish Requires 2.5mm Allen key (not supplied) 7mm Panel Support PO112 Acrylic poster holders with wings for panel support fixing to Strata Cable Kits Easy poster change design Available in landscape or portrait formats A1 to A5 sizes Poster Supports and Cable kits are not included
Cable Display Systems Adjustable Cable Kit PO109 with rail fixings 4metre x 1.5mm Strata adjustable cable kit Supplied with rail fixings Quality aluminium components Available in silver satin finish Recommended applications: Rail fixing (floor to ceiling) use PO109 with PR102 rail Rail fixing (wall to wall) use PO109 with 2 x PO107 variable joints and PR102 rail Wall fixing (wall to wall without rails) use PO109 with 2 x PO108 variable joints or 2 x PO106 variable wall plates Screw fixing (floor to ceiling) use PO109 with 2 x PO116 screw fix inserts Adjustable Cable Kit PO110 with screw fixings 4metre x 1.5mm Strata adjustable cable kit Supplied with screw fixings Quality aluminium components Available in silver satin finish Recommended applications: Floor to ceiling fixing Please note PO110 is not compatible with PO106, PO107 or PO108 components Aluminium insert PO115/PO116 Aluminium Choice of Rail (PO115) or Screw fix (PO116) options Suitable for PO109 Strata Cable Kits and Orbita Stand-off components Screw fasteners not supplied Aluminium Rail (channel) PR101/PR102 Aluminium Rail (channel) for Strata Cable kits or Orbita Stand-offs Available by the metre Complete with moulded end caps Quality silver satin finish Compact Variable Cable Fixing PO107/PO108 16mm dia x 25mm, 180 variable fixing Suitable for fixing to walls or ceilings Choice of Rail fix (PO107) or Screw fix (PO108) options Quality aluminium components Available in silver satin finish Requires 1.5mm and 2.5mm Allen keys (not supplied) Suitable for use with PO109 Strata Adjustable Cable kits Compact Variable Wallplate PO106 Compact 16mm dia x 25mm 180 variable wall plate fixing 360 free moving or lockable Quality aluminium components Available in silver satin finish Requires 1.5mm Allen key (not supplied) Please note: PO106 is not compatible with PO110 Strata Adjustable cable kit
Cable Display Systems 4mm Panel Support PO111 Strata shelf support fixing 16mm dia x 8mm Suitable for substrates 3mm thick min Requires a 9mm dia aperture in the substrate Quality aluminium components Available in silver satin finish Requires 2.5mm Allen key (not supplied)
Stand Offs Stand-offs for signage or shelf mounts, This attractive range includes options for wall available in a quality silver anodised finish. and rail fixing. Orbita standoffs are suitable for a variety of rigid sign substrates including acrylic, plastics and timber. Easy fix options for wall or rail mounting Ideal for Retail environments Choice of sizes Choice of Aperture or Edge fastening Quality silver anodised finish Substrate/signs are not included Aluminium rail is available by the metre 25 Dia 25 Dia 91 PO101 (rail fix) PO102 (screw fix) 16 Dia 25 Dia PO119-R (rail fix) PO119-S (screw fix) 16 Dia 36.5 21.5 34 34 PO118 (rail fix) PO117 (screw fix) PO104 (rail fix) PO105 (screw fix) PO120-R (rail fix) PO120-S (screw fix) 11mm dia cut-out in substrate is required Cut-outs in substrate are not required Aperture fastening Edge fastening Edge fastening All dimensions shown are in mm and are approximate PO101/02 PO104/05 PO117/18 PO119 PO120 Overall dimensions (height x diameter) (mm) approx: 91 x 25 21.5 x 16 36.5 x 25 34 x 16 34 x 25 Standoff distance from wall or ceiling (mm) (approx): 80 15 25 18.50 18.50 Weight kg (approx): 0.28 0.03 0.15 0.03 0.10 Recommended substrate thicknesses (mm): 5 to 20 2 to 10 2 to 10 2 to 10 2 to 10 E&OE.
Stand Offs Assembly Instructions Aperture fastening standoffs Rail attachment instructions Aperture fastening standoffs Wall or ceiling attachment instructions 1 2 3 1 2 3 Drill dia 11mm holes into the substrate. Mount aluminium rails to the wall or ceiling. Screw the brass rail insert into the standoff. Drill dia 11mm holes into the substrate. Unscrew and remove the brass insert. Attach the brass insert to the wall or ceiling (Screw fasteners are not supplied ) 4 5 6 4 5 6 Fit the standoff into the rail channel, turn clockwise to secure. Unscrew and remove the standoff cap. Align the drilled holes in the substrate over the standoff. Attach the standoff to the brass insert, turn clockwise to secure. Unscrew and remove the standoff cap. Align the drilled holes in the substrate over the standoff. 7 8 7 8 Refit the standoff cap to secure the substrate. Repeat steps 3 to 7 for the remaining standoffs. Refit the standoff cap to secure the substrate. Repeat steps 2 to 7 for the remaining standoffs. Edge fastening standoffs Rail attachment instructions Edge fastening standoffs Wall or ceiling attachment instructions 1 2 3 1 2 3 Mount aluminium rails to the wall or ceiling. Unscrew the brass rail insert and ensure it is proud of the standoff. Place the standoff into the rail channel, turn clockwise to tighten. Unscrew and remove the brass insert. Attach the brass insert to the wall or ceiling (Screw fasteners are not supplied ) Attach the standoff to the brass insert, turn clockwise to tighten. 4 5 6 4 5 6 If required, rotate the position of the standoff using a 1.5mm Allen key. Slide the substrate into the standoff and tighten using a 2.5mm Allen key. Repeat steps 2 to 5 for the remaining standoffs. Slide the substrate into the standoff. Using a 2.5mm Allen key tighten the standoff to the substrate. Repeat steps 2 to 5 for the remaining standoffs.