PRODUCT GUIDANCE FABRIC STANDS
FORMULATE FABRIC DISPLAY SYSTEM Description Formulate back walls are aluminium structures easy to assemble with graphics printed onto fabric graphic socks that fit snugly around the frame that can hold optional low voltage lighting and are supplied in a carry bag for transportation. Formulate is a large free standing display back wall ideal for exhibitions. e Straight Full Colour Fabric Graphics Single sided and double sided graphic options Extremely Lightweight and portable Packs flat for easy transportation Supplied with carry bag Follow frame numbering system Assembly of Formulate Straight Fabric Display Frame is contructed Follow frame numbering using system Snap Buttons Frame is contructed using Snap Buttons 2340mm T3 T4 2340mm T3 T2 T1 T4 T T6 2900mm T1 T2 T8 T T6 T7 T8 T7 Formulate Straight Rev4 Installation
Formulate Straight Attaching Graphic Attaching the Graphic traight Formulate Straight Rev4 Installation Formulate Straight Rev4 Installat
FORMULATE HORIZONTAL CURVE FABRIC DISPLAY SYSTEM 3 Important note: These instructions are based on assembling the 3m version. Other size kits will have slightly different configurations of poles but can still be assembled in the same way. Formulate Horizontal Curve ntal Curve Assembly of Formulate Horizontal Curve Fabric Display T3 T9 T4 T9 T3 T4 T2 0mm T2 T1 T T10 T6 T T1 T10 T6 *lights shown are optional extra s 284mm T8 T7 *lights shown are optional extra s T8 T7 Frame is contructed using Snap Buttons 600mm Frame is contructed using Snap Buttons Follow frame numbering system Follow frame numbering system Formulate Horizontal Curve Rev6 Formulate Horizontal Curve Rev6 Installation Installation
Formulate Horizontal Curv Attaching the Graphic Attaching Graphic late Horizontal Curve hic Formulate Horizontal Curve Rev6 Installation Formulate Horizon
FORMULATE VERTICAL CURVE FABRIC DISPLAY SYSTEM 3 Important note: These instructions are based on assembling the 3m version. Other size kits will have slightly different configurations of poles but can still be assembled in the same way. Curve Assembly of Formulate Horizontal Curve Fabric Display 1 2 10 13 8 21 14
F C R E H 10 13 8 21 14 on have still Note: Central pole is longer 4 18 1 17 Fab Cou Ret Exh Han Formulate Vertical Formulate Curve Curve Vertical Curve Attaching the Graphic Attaching Graphic Graphic Attaching Graphic ASSEMBLY GUIDE REV 1 1 1 2 2 2 ASSEMBLY GUIDE REV 1 ASSEMBLY GUIDE
IMPACT HOP UP DISPLAY SYSTEM Description An extremely lightweight pop-up display stand that s very quick and easy to set up offering a superb back drop to your display. The Dye- Sublimation Fabric Graphic fits smoothly across the framework and stays in place once frame has been collapsed. Yellow locking arms Single sided Wheeled carry bag included Optional spot lights available Assembly of Impact Hop Up System Assembly Instructions 1 2 Hold the frame vertically and begin to expand outwards. Continue to expand the frame until the graphic image appears. Push the frame tubes together to fully extend the system. Push fit together each pair of locking arms. Repeat for all the remaining arms. Wrap both vertical graphic ends tightly around the frame and fasten using hook & loop fastener. NB The Hop-up frame may also be assembled flat on the floor if space allows and then stood upright.
TWINBASE XL FABRIC BANNER STAND Description The Fabric Graphic Wall uses 3 (400mm wide) or 4 (6000mm wide) TwinBase XL Stands to support one wide continuous graphic. The aluminium bars are hinged together and simply open out ready to be displayed, this allows for a totally seamless graphic. Huge impacting graphics Lightweight and portable Seamless printing options Assembly of Twinbase XL Fabric Banner Stand