WM002 LCD Display Wall Mounting Kit Installation Guide Welcome
Copyright Copyright 2006 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes. 2
Important safety instructions 1. For safety reasons, please follow the important safety instructions in the LCD Display s user s manual. 2. This wall mount kit can hold up to 20 Kg of weight. It is necessary to consult professional technicians prior to mounting the LCD Display. Before installation, check whether the material of wall is able to support this weight. Check to see if the brick is of good quality material with good mortar/cement joints or if the bricks are loose and cracked, and if the bricks back up to another room or wall. Ensure that there are no signs of water damage or decay. 3. Do not install the LCD Display in a place where impact or vibration can affect. 4. Do not place a heat source (radiator or heater) or a humidifier under the installed LCD Display. 5. Do not install the LCD Display near a sprinkler. 6. Do not install the LCD Display by yourself alone. Get some help from others. 7. Make sure to unplug before installing the LCD Display. 8. Do not hang on the LCD Display once it is installed. 9. Always remember SAFETY FIRST and keep this guide for future reference. Always perform a safety load test before putting the LCD Display on the wall mount to ensure the wall can afford the integrity of your installation. 3
Package contents Mounting position reference chart x 1 Mounting hook x 2 Screw No. 1 (for 26 /30 /32 LCD Display) x 4 Screw No. 2 (for 37 LCD Display) x 4 Screw No. 3 x 8 Wall fixing x 2 Anchor x 8 4
Wall mounting instructions Detaching the stand In order not to damage the screen, place a piece of soft and clean cloth in front of the LCD Display, and lay down the LCD Display on the cloth with the screen facing downward. Loosen the 4 screws fixing the stand. 5
Fixing the mounting hooks As shown below, secure the mounting hooks on the back of the LCD Display using 4 No.1 (for 26 /30 /32 LCD Display) or No.2 (for 37 LCD Display) screws. Install the mounting hooks from position A first, and then position B. A B A B 6
Fastening the wall fixings on the wall 1. Stick the mounting position reference chart on the wall. 2. Drill 8 holes with a 6 mm diameter on the wall with a suitable driller according to the reference chart. 3. Insert the anchors into the holes. 4. Fasten the two wall fixings on the wall using 8 No. 3 screws. Install the wall fixings from position C first, and then position D. Please follow the safety instructions for walls or consult professionals to ensure the reliability of wall material and the right screws for the wall. The screws included in the wall mount kit are designed for cement walls. C C C C D D D D 7
Placing the LCD Display on the wall fixings As shown below, align the slots on the wall fixings with the mounting hooks on the LCD Display, and hook the LCD Display into place. 8
Checking installation The installation is complete. Check for any loose screws on the mounting hook or wall fixings, or cracks on the wall. Should the LCD Display appear to be unstable, remove it from the wall immediately and consult your place of purchase or a professional technician for help. 9
<Memo> 10