How to Access Coast Wi-Fi Below is a summary of the information required to configure your device to connect to the coast-wifi network. For further assistance in configuring your specific device, continue reading. Configuration Wireless SSID Network Authentication Data Encryption Authentication (EAP) Type PEAP Type PEAP Method (Inner Link Security) User Name Password Domain Setting coast-wifi WPA2-Enterprise AES Protected EAP (PEAP) PEAP v0 EAP-MSCHAP v2 <your COAST domain account> <your password> <leave blank> In order connect to coast-wifi your device must be WPA2-Enterprise capable. General Troubleshooting Tips If you are unable to connect you may need to turn your device's wireless connection off and back on. You may need to re-order your wireless networks to give Coast Wi-Fi a higher priority. Your COAST credentials are the username and password combination that you use to login to computers on campus. This is a different set of credentials than you use to log on to your MyGWC account. 09/08/14 Coast Wi-Fi 1
Windows 7 & 8 1. Navigate to the Windows Control Panel. 2. Click on Network and Sharing Center. 3. Select Manage wireless networks located in the left menu. 4. Click the Add button, and select Manually create a network profile. 5. Enter the following data, as shown in the image below: Network name: coast-wifi Security type: WPA2-Enterprise Encryption type: AES Security Key: <leave blank> Optional step: To automatically select coast-wifi whenever it is available, check the Start this connection automatically box. 09/08/14 Coast Wi-Fi 2
6. After clicking Next, You will see a window stating Successfully added coast-wifi. Do not close this window, click Change connection settings: 7. In the coast-wifi Wireless Network Properties window, select the Security tab. 8. In the Choose a network authentication method drop-down menu, select Microsoft: Protected EAP (PEAP). 9. Check the box next to Remember my credentials for this connection each time I'm logged on. 10. Click the Settings button: 09/08/14 Coast Wi-Fi 3
11. In the Protected EAP Properties window uncheck the Validate server certificate box. 12. Check Enable Fast Reconnect. 13. Under Select Authentication Method, select Secured password (EAP-MSCHAP v2). 14. Click the Configure... button: 09/08/14 Coast Wi-Fi 4
15. Uncheck Automatically use my Windows logon name and password (and domain if any), and click OK to close the EAP MSCHAPv2 Properties window, and OK again to close the Protected EAP Properties window: 09/08/14 Coast Wi-Fi 5
16. Click the Advanced settings button at the bottom of coast-wifi Wireless Network Properties window: 17. In the 802.1X settings tab, check the box next to Specify authentication mode and select User authentication from the drop-down menu. 18. Click on Save credentials 19. Enter the following data, and click OK: User name: <your COAST domain username> Password: <your password> 20. Click OK to close the Advanced settings window, and click OK again to close the coastwifi Wireless Network Properties window: 09/08/14 Coast Wi-Fi 6
21. When in the range of a coast-wifi access point, browse for wireless networks and connect to the coast-wifi network: 09/08/14 Coast Wi-Fi 7
Apple OSX 1) From the System Preferences menu, click on the Network icon. 2) Highlight the Wi-Fi option on the left, click on the dropdown menu next to Network Name, and select coast-wifi from the list of available wireless networks. 3) Enter your COAST username and password. Make sure Mode is set to automatic and Remember this network is checked. Click on Join. 09/08/14 Coast Wi-Fi 8
4) Click on Continue when prompted to verify the certificate. 5) Enter the username and password for your Apple computer if prompted to allow changes to your Certificate Trust Settings. Click on Update Settings 6) Once you are connected, the Status of your Wi-Fi connection will say Connected. 09/08/14 Coast Wi-Fi 9
09/08/14 Coast Wi-Fi 10
iphone or ipad 1) Go to Settings, then Wi-Fi and select coast-wifi 2) Enter your COAST credentials into the prompt. 09/08/14 Coast Wi-Fi 11
3) Press Accept when prompted to verify the certificate. 3) After pressing Accept, you will see the following screen showing your connection. 09/08/14 Coast Wi-Fi 12
To verify, press. You will then see the following IP settings.. 09/08/14 Coast Wi-Fi 13
Android 1. Navigate and launch your Settings Application, then select Wi-Fi 2. Select coast wifi from the list of available networks 3. Type your coast username into the Identity Field 4. Type your password into the password field and hit connect 09/08/14 Coast Wi-Fi 14
Chromebook 1. From your desktop, click the Wi-Fi opetion and select coast-wifi from the available networks. 2. Setup the connection as follows: Change EAP method to PEAP Phase 2 authentication to MSCHAPv2 Server CA certificate to Do not check (see screenshot below). 3. Enter your credentials into the Identity and password fields and press connect 09/08/14 Coast Wi-Fi 15